Executive summary
zhuifengshaonianhanlu/pikachu falls short of our standard for production because the project has no automated tests and we found no working pipeline that builds or tests changes to the code. It scores 34.2 out of 100 and is rated Weak, and six of its seven critical findings are security problems in its code and in its servers and containers.
Production Readiness, at 11.3, is the weakest lens and counts most in the score. The best first step is adding automated tests, worth about 22.6 points. Raising Production Readiness to 70 would lift the score to about 54.6.
Four weaknesses in the code could be used by an attacker. Two settings leave the servers or containers unsafe, and the project has no automated tests, so a change can break it without warning. Adding automated tests, fixing the weaknesses the scanner points to and correcting the unsafe settings would close these risks.
The product code is 7,576 lines, about €6,500 to rebuild.
If Production Readiness rose from 11.3 to 70, the lowest score rated Strong, the score would rise from 34.2 to about 54.6.
New since the last survey: 3 findings
- Code Duplication · Edited copy of a member (36 corresponding lines) inc/uploadfunction.php
- Code Duplication · Edited copy of a member (17 corresponding lines) REDACTED
- Coupling · Off the main sequence: inc
Fixed since the last survey: 2 findings
- Code Duplication · Members sharing a duplicated core (5 members, 50+ identical tokens) REDACTED
- Code Duplication · Duplicated block (11 lines × 5) REDACTED
Rebuild cost: about €6,500 · Estimate
| Cost to rebuild | €2,100 to €11,000, for 36 to 113 hours of work, under 0.1 person-years for one engineer |
|---|---|
| Difficulty of the problem | Standard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write. |
| Quality factor | ×0.7 at a score of 34. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it. |
| Size | Small: 7,576 lines of product code |
| What it is not | Not a quotation: nobody has offered to build it for that. Not a valuation: it says nothing about what the business is worth. Not a certified figure: no professional has signed it as one. |
Top priorities
Diagnosis: what the measurements show together
Architecture — module dependency graph
At a glance — Code Health
At a glance — Architecture
At a glance — Maturity
At a glance — Readiness
At a glance — Security
Security & Compliance — OWASP Top-10 mapping
| OWASP category | Findings | Severity |
|---|---|---|
| A05:2025 — Injection | 68 | High / Critical |
| A02:2025 — Security Misconfiguration | 5 | High / Critical |
Roadmap
Top priorities: Resolve the 1 No automated tests finding(s) in Code Coverage; Resolve the 1 No ADRs found finding(s) in ADR Quality — start with REDACTED; Add a CI workflow that builds and runs the test suite on every push/PR.
| Do this | Helps | Effort | Dimension |
|---|---|---|---|
| Resolve the 1 No automated tests finding(s) in Code Coverage. | +22.6 pts | High | Code Coverage |
| Resolve the 1 No ADRs found finding(s) in ADR Quality — start with REDACTED. | +5.0 pts | Low | ADR Quality |
| Add a CI workflow that builds and runs the test suite on every push/PR. | +4.2 pts | Medium | CI/CD gates |
| Log through a PSR-3 logger (Monolog, or Laravel's `Log` facade) with a JSON formatter at meaningful points in the applications you run. | +4.2 pts | Medium | Observability |
| Run what this repository's stack ships: phpstan or psalm — or `semgrep --config=auto`, which runs on any language — locally for now, since there is no CI pipeline here yet, and as a step of the first workflow you add so a security regression fails the build instead of landing. | +4.2 pts | Medium | Security & performance tooling |
| Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them. | +3.6 pts | Medium | Architecture documentation |
| Raise PHPStan to level 8 (`level: 8` in `phpstan.neon.dist`, or `max`) or Psalm to `errorLevel="3"` or stricter, so `?Type` is a type the checker holds you to; generate a baseline for what that surfaces only to pay it down, not to keep it. Then resolve the baselined nullness errors rather than adding to them: each is a call on a value the checker showed could be null — narrow it (`if ($x === null) { … }`, `?->`, an early return), make the property non-nullable and initialise it in the constructor, or change the return type so the null cannot arrive. | +2.7 pts | Medium | Nullable reference types |
| Swallowed exception (caught, then discarded) | +2.5 pts | Medium | Exception handling |
File quality
| File | Score | Band | Worst signal |
|---|---|---|---|
| REDACTED | 1.5 | Slop | IaC & Container Security: High IaC: REDACTED |
| REDACTED | 2.7 | Slop | Static Analysis (SAST): High: REDACTED |
| REDACTED | 4.6 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| REDACTED | 6.1 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| REDACTED | 6.9 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| REDACTED | 6.9 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| REDACTED | 6.9 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| REDACTED | 6.9 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| REDACTED | 6.9 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| REDACTED | 6.9 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| REDACTED | 6.9 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| REDACTED | 6.9 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| REDACTED | 6.9 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| REDACTED | 6.9 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| REDACTED | 6.9 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| REDACTED | 6.9 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| inc/uploadfunction.php | 7.2 | Mixed | Code Duplication: Edited copy of a member (36 corresponding lines) |
| inc/mysql.inc.php | 7.8 | Mixed | Code Duplication: Duplicated block (7 lines × 2) |
| REDACTED | 7.9 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| REDACTED | 7.9 | Mixed | Static Analysis (SAST): Medium: REDACTED |
How the grades work
A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.
Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.
Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.
Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.
Methodology & how to trust this report
This survey is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. All 26 evaluated dimensions are computed by tools and static analysis; no language model sets or judges any of them. Overall confidence is 0.7, the weighted average across measured dimensions.
What we checked — 26 dimensions across the health lenses
- Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 90 of 99 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line.
- Is there a tool behind the number? Every score below names the method that produced it: Roslyn, git or a scanner, not a narrative.
- Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.
Tools & methods
| Method | Backs | Version | Evaluator |
|---|---|---|---|
| Roslyn static analysis | Complexity, cohesion, coupling, dead code, API surface, layering | 5.3.0 | ✓ deterministic |
| Native secret scanner | Hardcoded secrets / credentials | 1.0.0 | ✓ deterministic |
| Canine Code Analyzer duplication detector (in-process) | Code duplication | 1.0.0 | ✓ deterministic |
| Coverage (coverlet / dotnet-coverage) | Line & branch coverage | 10.0.400 | ✓ deterministic |
| NuGet / dotnet | Outdated, vulnerable & deprecated dependencies | 10.0.400 | ✓ deterministic |
| git / LibGit2Sharp | Churn hotspots, knowledge concentration, history | 2.43.0 · 0.31.0 | ✓ deterministic |
| gitleaks · semgrep · trivy · checkov | Secrets in history, SAST, CVEs, IaC & container, PII / GDPR | 1.86.0 · 0.69.3 · 3.2.533 | ✓ deterministic |
Run transparency — what happened this run
- D1 Cyclomatic Complexity — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Most of this repository's production source (.php) had no cyclomatic complexity computed for it: no method bodies were exposed for those file kinds by any language model this pass could load.
- D2 Cognitive Complexity — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Most of this repository's production source (.php) had no cognitive complexity computed for it: no method bodies were exposed for those file kinds by any language model this pass could load.
- D4 Code Duplication — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. The 6 duplicated block group(s) on this row were found in the languages this pass could tokenize, and they do NOT cover all of this repository's production source: .php (7,576 lines, 100% of production source) went unread, because no language model this pass could load exposed a clone-unit token stream for those file kinds. Duplication in that source is UNMEASURED — its absence from the count above is a gap in this analyzer's language coverage, not a finding that the code is free of duplication.
- D12 Dependency Hygiene — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. No dependency manifest this pass reads for hygiene (a Python pyproject.toml/requirements.txt (pip/uv/Poetry), a Swift Package.swift/Package.resolved, a Cargo manifest, a Go module (go.mod/go.sum), a Gradle version catalogue, a Maven POM, an sbt build (build.sbt), composer.json, package.json, a Dart pubspec.yaml, an Elixir mix.exs/mix.lock (Hex), a rebar.config / erlang.mk DEPS (Hex), a Ruby Gemfile/Gemfile.lock or .gemspec (Bundler/RubyGems)) was found in this repository, so no package was assessed. Zero packages read is NOT a clean dependency tree, so this is NOT SCORED — a gap in the analyzer, not a verdict about this repository. This row is about dependency HYGIENE — outdated, deprecated or unmaintained direct dependencies; known CVEs in the same dependency graph are a separate question, reported under D30 wherever the manifest is OSV-readable.
- D14 License Compliance — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Not scored — no dependency manifest this pass reads for licence data (a Python pyproject.toml/requirements.txt (pip/uv/Poetry), a Swift Package.swift/Package.resolved, a Cargo manifest, a Go module (go.mod/go.sum), a Gradle version catalogue, a Maven POM, an sbt build (build.sbt), composer.json, package.json, a Dart pubspec.yaml, an Elixir mix.exs/mix.lock (Hex), a rebar.config / erlang.mk DEPS (Hex), a Ruby Gemfile/Gemfile.lock or .gemspec (Bundler/RubyGems)) was found in this repository, so it declares no third-party dependency closure to grade. A gap in the analyzer, NOT a finding that this repository's licences are compliant: a manifest in an ecosystem outside that list, or third-party code copied into the tree, is not read — so this dimension asserts nothing about this repository's licensing in either direction.
- D15 Churn × Complexity Hotspots — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. A hotspot is churn × complexity. Churn was measured (34 line(s) across the 90-day window), but no complexity could be computed for .php, which is most of this repository's production code — so every churned file would score as complexity 0 and the hotspot list would be empty no matter how tangled the code is. Not scored — this is a gap in the analysis run, not a finding about this repository.
- D16 Bus Factor — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Single-maintainer repository — bus factor is not applicable (4 contributor(s) across 70 commit(s) sampled, automation and bot accounts excluded). One of them holds 93% of the history; the other 3 hold 2.3% each on average, below the 5% at which there is somebody to hand the work to. That is a single maintainer with drive-by contributors, not a team whose knowledge has concentrated — so the bus factor is not applicable and there is nothing here for the owner to act on.
- D21 Naming Consistency — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D21's naming rules read C# through Roslyn and every other language through its sidecar model; these languages are left out (PHP's reading is its own change, a Roslyn-loaded VB or F# project has no population builder yet). Their declarations carry no naming verdict this run — this says nothing about whether their names are consistent.
- D22 Internal API Consistency — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D22 identifies the intentionally-exposed surface from `IsPackable` and `.Contracts` project names, MSBuild conventions read off the loaded project set. This target exposed no such projects, so the probe never ran; this says nothing about whether the repository has a public API. This repository commits no C#/VB source at all, so there was never an MSBuild project set to read these conventions off. That is OUR side and it is an ADMISSION gap, not an environment fault: no published-package marker D22 reads admitted any project here. D22 DOES collect the public API of every language in this tree, and admits a project only when its manifest makes that ecosystem's publication act in a form the marker recognises — so what is missing is not a collector but an admission rule for the publication act this repository makes, if it makes one. The remedy is a better discriminator for that marker — not a collector, and no change to the scan image can close it. The marker's rules are measured to refuse applications, so one refused repository is the rule working as calibrated; several are the evidence that it is too strict. For npm the surface is what a published package.json's entry points (exports, main, module, types) export, followed through the source; an entry that names build output the tree does not commit (dist/, build/) is not followed back to source, because only a tsconfig outDir/rootDir pair states that mapping and a bundler's input lives in executable configuration this engine does not evaluate.
- D24 Comment Value — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Each source language's comment syntax, and the code a comment annotates in it, needs its own proof before D24 judges it. Until then those comments are left unread, not counted as clean.
- D44 Platform End-of-Life — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This dimension reads a project's own statement about the platform it runs on: a TargetFramework in a .NET project file, a .nvmrc or .python-version, a capped requires-python, a Rust toolchain file or Cargo.toml rust-version, a .go-version, .java-version, .ruby-version, .tool-versions or .sdkmanrc, a go.mod go directive, a Maven or Gradle Java level or toolchain, a Gemfile's ruby directive, a mix.exs elixir requirement, a rebar.config minimum_otp_vsn, a pubspec.yaml SDK constraint, a build.sbt scalaVersion, or a framework major pinned by a dependency constraint. This repository carries none of them, so nothing about its platform was established. That is a gap in this analyzer's coverage, NOT a finding that the platform is supported — a language whose runtime is declared elsewhere (Package.swift, a REDACTED) is simply not read here yet.
- C1 Data Protection — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 'mysqli_connect' is imported (index.php:14), but no entity, schema, table or model declaration this check reads was found beside it, so whether personal data is stored could not be decided.
- C3 Audit Trail — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 'mysqli_connect' is imported (index.php:14), but no entity, schema, table or model declaration this check reads was found beside it, so whether personal data is stored could not be decided.
- C4 Data Retention — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 'mysqli_connect' is imported (index.php:14), but no entity, schema, table or model declaration this check reads was found beside it, so whether personal data is stored could not be decided.
- C5 Data-Subject Rights — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 'mysqli_connect' is imported (index.php:14), but no entity, schema, table or model declaration this check reads was found beside it, so whether personal data is stored could not be decided.
- GD1 Unfinished & placeholder code — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, F#, JavaScript/TypeScript, Dart, Ruby, Scala, Rust and Java source only, and this repository's PHP is most of its product and is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- IC1 Incompleteness & stubs — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, JavaScript/TypeScript, Java, Dart, Ruby, Scala and Rust source only, and this repository's PHP is most of its product and is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- P5 DR & Backup — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. No backup/snapshot/replication config, RTO/RPO or restore-procedure documentation was found — and no production persistence was detected either (no data-access packages, no data-store services, no database resources), so there is nothing in this repository whose loss a DR control would recover. If this system's data lives in a platform or ops repo we can't see, that's where the DR evidence belongs.
- S1 Web-Security Posture — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These web-security controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks web-security controls.
- X12 Unreachable branch — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check's reader does not cover most of the languages this repository's product is written in. What it read is kept, but it is too small a share to grade the product by. That is a gap in this analyzer's language reach — not a finding about this repository.
- X4 Structured logging — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Python, PHP, Dart, Ruby, Scala, Rust, Go, Swift, Erlang, F# and Visual Basic source only, and no C# was loaded, and this repository's JavaScript/TypeScript, Python and PHP make no call through a named logger, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
Limitations & what we did not check
We assess the repository exactly as committed, and only the repository. By design we do not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.
Per-dimension blind spots
- D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
- D5 Coupling: Coupling is measured between projects/assemblies — runtime coupling through DI, reflection, messaging or shared databases is invisible to a static reference graph.
- D8 Code Coverage: Coverage is measured by building and running the test suite inside our isolated image — the target repo is never modified, and nothing on your systems runs. So coverage exists only when the suite builds and runs within the inline time budget; one that needs external services, can't build, or exceeds the budget yields no coverage (D8 then degrades to not-measured, not a low score). Line coverage also says nothing about assertion quality.
- D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
- D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
- D20 ADR Quality: ADR quality checks the structure of the decision records present: it cannot know about decisions made and never recorded, and it does not judge how well a record argues its case. Records in a language the section lexicon does not cover are not evaluated.
- D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
- D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
- D31 IaC & Container Security: IaC scanning checks Dockerfiles/Terraform/Kubernetes against best-practice rules — it cannot see the live cloud account, runtime configuration, or drift between the committed config and what is actually deployed.
- D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
- D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
- AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
- P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".
Dimensions
D4 · Code Duplication
6 duplicated block group(s) detected. 2.0 % of the production lines (151 of 7,576) are in a reported copy. A further 2 rows report members as variants of one another; the share counts each copied line once, however many rows cite it. Measured on part of this repository only: .php (100% of production source) was not exposed to the token comparison, so duplication there is unmeasured and is not in this count.
What to do
- Resolve the 1 Edited copy of a member (36 corresponding lines) finding(s) in Code Duplication — start with uploadfunction.php. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 Edited copy of a member (17 corresponding lines) finding(s) in Code Duplication — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 Duplicated block (21 lines × 2) finding(s) in Code Duplication — start with uploadfunction.php. — One of this dimension's main actionable groups (1 warning-level).
D5 · Coupling
5 production modules (source-import), 0 dependency cycle(s), 0 unstable depended-on module(s). No manifest declares this repository's modules, so the modules are its top-level source directories and the edges the imports between them; 1 module(s) off the main sequence, with abstractness counted on 3 of the 5 (the rest declare no modelled class or interface, export only macros, declare types in source no model reads, or have no source directory of their own).
What to do
- Resolve the 1 Off the main sequence finding(s) in Coupling. — One of this dimension's main actionable groups (1 warning-level).
D8 · Code Coverage
No automated tests — no test code was found in this repository.
What to do
- Resolve the 1 No automated tests finding(s) in Code Coverage. — One of this dimension's main actionable groups (1 issue-level).
D13 · Secret Scanning
Secret scan ran and found no leaked secrets.
D17 · Explicit Debt
0 deducted task-comment markers across 7576 LoC (0.0/KLoC) → score 10.0. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.
D20 · ADR Quality
No architecture decision records were found.
What to do
- Resolve the 1 No ADRs found finding(s) in ADR Quality — start with REDACTED. — One of this dimension's main actionable groups (1 recommendation-level).
D28 · Secrets (history)
gitleaks scanned the full history AND the current working tree and found no secrets.
D29 · Static Analysis (SAST)
69 finding(s): 0 critical, 4 high, 65 medium, 0 low.
What to do
- Resolve the 41 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED (2), REDACTED (2), REDACTED (2). — One of this dimension's main actionable groups (41 warning-level).
- Resolve the 19 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED (2), REDACTED, REDACTED. — One of this dimension's main actionable groups (19 warning-level).
- Resolve the 4 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED (4). — One of this dimension's main actionable groups (4 issue-level).
D31 · IaC & Container Security
5 finding(s): 0 critical, 2 high, 2 medium, 1 low.
What to do
- Resolve the 2 High IaC finding(s) in IaC & Container Security — start with REDACTED (2). — One of this dimension's main actionable groups (2 issue-level).
- Resolve the 2 Medium IaC finding(s) in IaC & Container Security — start with REDACTED (2). — One of this dimension's main actionable groups (2 warning-level).
- Resolve the 1 Low IaC finding(s) in IaC & Container Security — start with REDACTED. — One of this dimension's main actionable groups (1 recommendation-level).
D34 · Knowledge Freshness
Every significant source file has living knowledge — recently and meaningfully worked. Counted over 77 of the 111 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.
D35 · Change Coupling
No strong hidden change-coupling between production files.
Frontend & cross-cutting dimensions
AX10 · Code composition
AX3 · Project dependency cycles
AX4 · Dependency direction
M1 · Documentation (README)
What to do
- Add a build/run (quick start) section to the root README — the first thing a newcomer needs.
- Explain in the README how to run the tests. Add a section called Testing to the README in the repository's top folder, saying how to run the test suite.
M2 · Architecture documentation
- No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
- No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.
What to do
- Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
- Add a C4 context/container diagram (Structurizr, PlantUML or Mermaid) or an architecture.md overview.
M3 · Folder & project structure
- Most of the production code is in directories of its own, but 4 application file(s) sit at the repository root beside the build and tooling files (`footer.php`, `header.php`, `index.php`, `install.php`).
P1 · CI/CD gates
- No CI workflow found (.github/workflows, azure-pipelines.yml, .gitlab-ci.yml, …) — changes aren't gated by an automated build/test.
What to do
- Add a CI workflow that builds and runs the test suite on every push/PR.
P2 · Observability
- No logging call was found in the 116 JavaScript/TypeScript, PHP production file(s) this check read across 2 module(s). Each was searched for its ecosystem's logging libraries (JavaScript/TypeScript: pino, winston, bunyan, log4js, loglevel, consola, the NestJS Logger; PHP: PSR-3 loggers (Monolog), Laravel's Log facade, error_log()) and for a call on a receiver named `log`/`logger` (or ending in `Logger`/`_logger`) with a level verb. It cannot see logging through a repo-local wrapper named otherwise, or in source it did not read — this is 'no logging found by this walk', not a verdict that nothing here logs. If it is right, production issues will be hard to diagnose.
What to do
- Log through a PSR-3 logger (Monolog, or Laravel's `Log` facade) with a JSON formatter at meaningful points in the applications you run.
- Add a health-check endpoint (Laravel's /up health route or a /health route) so orchestrators and load balancers can probe liveness/readiness.
P3 · Security & performance tooling
- No static application security testing detected. For this repository's stack, add phpstan or psalm (or `semgrep --config=auto`, which runs on any language) — this repository has no CI pipeline yet, so run it locally to clear the existing findings, then make it a step of the first workflow you add so a regression fails the build. What was searched, so you can tell an absence from a miss: the 0 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner.
What to do
- Run what this repository's stack ships: phpstan or psalm — or `semgrep --config=auto`, which runs on any language — locally for now, since there is no CI pipeline here yet, and as a step of the first workflow you add so a security regression fails the build instead of landing.
- Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
P4 · Deployment & Rollback
What to do
- Nothing pauses a release for a human: publish as a draft release (or gate the release job on a protected tag/manual dispatch) so a bad build can be stopped before users can download it.
P7 · Outbound HTTP resilience
- `curl_exec(` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout. (×2) — vul/ssrf/ssrf.php:49, REDACTED:34
What to do
- Give every client an explicit bound: `new Client(['timeout' => 10, 'connect_timeout' => 3])` for Guzzle (whose default is to wait forever), `CURLOPT_TIMEOUT`/`CURLOPT_CONNECTTIMEOUT` before `curl_exec`, `timeout`/`max_duration` on Symfony HttpClient (or `framework.http_client.default_options`), and a stream-context `timeout` or `connection_timeout` for `file_get_contents`/`SoapClient`. In Drupal, use the `http_client` service, which carries core's site-wide timeout, rather than `new Client()`. Add retries with back-off (Guzzle `Middleware::retry`, Symfony `RetryableHttpClient`, Laravel `->retry()`) around dependencies that fail.
X16 · Unfloored truncation loop
X27 · Collection changed while being enumerated
X3 · Exception handling
- `catch (Exception)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter. (×2) — index.php:16, pkxss/index.php:12
What to do
- Swallowed exception (caught, then discarded)
X5 · Nullable reference types
- This repository commits no PHPStan or Psalm configuration (`phpstan.neon[.dist]`, `phpstan.dist.neon`, `psalm.xml[.dist]`, or one a composer.json script names with `--configuration`), so nothing checks null: a `?Customer` reaches `->name()` silently and throws `Error: Call to a member function name() on null` the first time it is null. If the build passes a level on a command line instead, put it in a committed configuration — this check reads configuration, and configuration is all it can read.
What to do
- Raise PHPStan to level 8 (`level: 8` in `phpstan.neon.dist`, or `max`) or Psalm to `errorLevel="3"` or stricter, so `?Type` is a type the checker holds you to; generate a baseline for what that surfaces only to pay it down, not to keep it. Then resolve the baselined nullness errors rather than adding to them: each is a call on a value the checker showed could be null — narrow it (`if ($x === null) { … }`, `?->`, an early return), make the property non-nullable and initialise it in the constructor, or change the return type so the null cannot arrive.
Reference — by lens
| Lens | Score | Rating | Impact |
|---|---|---|---|
| Code Health | 49.0 | Weak — gated by X3, X5 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Architecture | 96.4 | Exemplary | Strongest area. |
| Maturity | 48.3 | Weak — gated by M2 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Readiness | 11.3 | Critical — gated by D8, P1, P2, P3, P7 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Security | 64.3 | Checked 3 of 9 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
Unscored — 1 check(s) recorded observations but carry no score
- X10 Duplicated predicate — 4 observation(s) recorded · Advisory — this card reports evidence and never carries a score.
Not evidenced — 5 control(s) we could not find positive evidence for
- C3 Audit Trail — Not assessed: this repository stores data through 'mysqli_connect' (index.php:14) but declares no persisted model this check reads (Laravel migration columns, Eloquent $fillable/$hidden lists, Doctrine #[ORM\Column] properties). Personal data may be written through raw SQL or a hosted backend, so whether its changes need an audit trail could not be established, and the trail's absence is not scored.
- C4 Data Retention — Not assessed: this repository stores data through 'mysqli_connect' (index.php:14) but declares no persisted model this check reads (Laravel migration columns, Eloquent $fillable/$hidden lists, Doctrine #[ORM\Column] properties). Personal data may be written through raw SQL or a hosted backend, so whether a retention limit applies here could not be established, and its absence is not scored.
- C5 Data-Subject Rights — Not assessed: this repository stores data through 'mysqli_connect' (index.php:14) but declares no persisted model this check reads (Laravel migration columns, Eloquent $fillable/$hidden lists, Doctrine #[ORM\Column] properties). Personal data may be written through raw SQL or a hosted backend, so whether data-subject rights apply here could not be established, and their absence is not scored.
- P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
- P6 Release Hygiene — not evidenced — no changelog, version stamp or semver release tag in the repo
Not included — 84 check(s) not relevant to this codebase
- AC1 Text alternatives — Frontend below the scale floor (7 DOM element(s) < 25) — too little surface to assess accessibility.
- AC2 Forms & labels — Frontend below the scale floor (7 DOM element(s) < 25) — too little surface to assess accessibility.
- AC3 Page structure — Frontend below the scale floor (7 DOM element(s) < 25) — too little surface to assess accessibility.
- AC4 Keyboard semantics — Frontend below the scale floor (7 DOM element(s) < 25) — too little surface to assess accessibility.
- AC5 ARIA correctness — Frontend below the scale floor (7 DOM element(s) < 25) — too little surface to assess accessibility.
- AC6 Visual & motion safety — Frontend below the scale floor (7 DOM element(s) < 25) — too little surface to assess accessibility.
- AX1 Captive dependencies — Not applicable: this repository's JavaScript imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's; this repository's PHP imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's.
- AX2 Stateful singletons — Not applicable: PHP builds its object graph per request and shares none of it between requests. TypeScript/JavaScript runs each process's requests on one event loop, so no two requests write a shared object at the same instant (interleaving across an await is a different defect).
- AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX6 Interface segregation — no interface, protocol or abstract type declares an operation an implementer must write
- AX7 Slice cohesion — not applicable — not a vertical-slice architecture
- AX8 Test isolation — no test/production split to check
- AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
- AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- AXR1 Runtime accessibility — docker build failed (exit 1) — pache2/php.ini ; sed -i '$a extension=expect.so' /etc/php/7.4/apache2/php.ini ; sed -i '/DBPW/s/root//g' /app/pkxss/inc/config.inc.php ; sed -i '/DBPW/s/root//g' /app/inc/config.inc.php ; phpenmod expect && apt-get remove -y php7.4-dev tcl-dev tcl-expect-dev && apt-get autoremove -y && apt-get clean -y && rm -rf /var/lib/apt/lists/*" did not complete successfully: exit code: 255; likely cause (the repository): a RUN step of the repository's REDACTED exited with code 255 (`/bin/sh -c apt-get update -y && apt-get install -y php7.4-dev php-pear expect tcl-dev tcl-expect-dev && ln -s /usr…`): the build's own command failed, for example a compile or test error; runtime evidence skipped The cause is in the repository, not in our sandbox: a RUN step of the repository's REDACTED exited with code 255 (`/bin/sh -c apt-get update -y && apt-get install -y php7.4-dev php-pear expect tcl-dev tcl-expect-dev && ln -s /usr…`): the build's own command failed, for example a compile or test error. Nothing here says the surface is inaccessible, only that it was never rendered.
- C1 Data Protection — Not assessed: this repository stores data through 'mysqli_connect' (index.php:14) but declares no persisted model this check reads (Laravel migration columns, Eloquent $fillable/$hidden lists, Doctrine #[ORM\Column] properties). Personal data may be written through raw SQL or a hosted backend, so the absence of a personal-data field here is not evidence that none is stored, and encryption at rest is not scored over a subject that could not be established.
- C2 Access Controls — No access-control surface detected in the analyzed source — this repository registers no route (no Laravel Route::…, no Symfony #[Route], no Filament panel, no WordPress REST route or AJAX action). Access control is therefore N/A here — a Composer library is authorized by the application that mounts it, not by itself. If this codebase grows request handlers, the dimension reactivates and a default-deny posture is expected then.
- D1 Cyclomatic Complexity — cyclomatic complexity not measured — .php exposed no member bodies
- D10 Test Quality — No tests were found in the analyzed repository to assess for quality.
- D11 Test Reliability — No test suite was found to re-run, so reliability couldn't be assessed. Two searches produced that zero and both came back empty: the classifier that reads the loaded workspace recognised no suite it could run, and a walk of the source on disk — which covers the JS/TS `*.test.*` and `*.spec.*` conventions and probes for a Pester suite — found no test source in any other ecosystem either. Neither search reaches a suite that is missing from the loaded workspace and carries no name either walk recognises, so this is 'no suite found by those two searches', not a verdict that the repository has none.
- D12 Dependency Hygiene — Dependency hygiene not measured — no supported dependency manifest was read
- D14 License Compliance — No dependency manifest found — no declared dependency closure to grade for licences
- D15 Churn × Complexity Hotspots — complexity unreadable for .php — churn × complexity hotspots could not be measured
- D16 Bus Factor — single-maintainer repository — bus factor is not applicable
- D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
- D19 Documentation Quality — No runnable or published unit to look for an example in, and no multi-project root README to look for a map in; the other documentation kinds are withheld (see the gaps), so documentation quality is not applicable here.
- D2 Cognitive Complexity — cognitive complexity not measured — .php exposed no member bodies
- D21 Naming Consistency — Naming consistency does not read PHP, html yet; not measured.
- D22 Internal API Consistency — The exposed public-API surface could not be collected — no C#/VB projects loaded.
- D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ sibling projects each declaring an entity of their own or taking another project's integration events. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
- D24 Comment Value — D24 reads C#, Visual Basic, TypeScript and JavaScript comments only; comments in this repository's .php source were not judged.
- D25 ADR Conformance — no ADRs to check
- D26 Project Cohesion — This repository is one build unit, `(repository root)` (7672 LoC, 8 module-visible types across 6 directories), within the size bounds. Not scored: a single unit of this size gives project cohesion nothing to grade.
- D27 Navigability — No calls could be sampled, so navigability was not assessed — tracing effort is measured over resolved call sites and this target exposed none. Not scored — this is a gap in the analyzer's reach, not a verdict about this repository.
- D3 God Classes — Most of this repository's production source (.php) was not read by god-class detection, so class size was not assessed for the languages that are the product — whatever else this pass did read is not this repository's class size. Not scored — this is a gap in the analyzer, not a verdict about this repository.
- D30 Dependency Vulnerabilities — Not scored — no dependency manifest in a supported ecosystem was read for this repository. A gap in the analyzer's language coverage, NOT a finding that the repository is free of vulnerable dependencies (a Python pyproject.toml/requirements.txt (pip/uv/Poetry), a Swift Package.swift/Package.resolved, a Cargo manifest, a Go module (go.mod/go.sum), a Gradle version catalogue, a Maven POM, an sbt build (build.sbt), composer.json, package.json, a Dart pubspec.yaml, an Elixir mix.exs/mix.lock (Hex), a rebar.config / erlang.mk DEPS (Hex), a Ruby Gemfile/Gemfile.lock or .gemspec (Bundler/RubyGems) — not scanned yet).
- D32 Data Compliance (PII/GDPR) — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.
- D36 Supply-chain Provenance & Signing — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .circleci, .buildkite, .woodpecker, .teamcity, .gitlab-ci.yml, .travis.yml, bitbucket-pipelines.yml, .drone.yml, .cirrus.yml, .woodpecker.yml, appveyor.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, .azuredevops/, Jenkinsfile); there is no build to attest provenance for.
- D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
- D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
- D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
- D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
- D43 Malicious Dependencies — Not scored — no dependency manifest in a supported ecosystem was read for this repository. A gap in the analyzer's language coverage, NOT a finding that the repository is free of vulnerable dependencies (a Python pyproject.toml/requirements.txt (pip/uv/Poetry), a Swift Package.swift/Package.resolved, a Cargo manifest, a Go module (go.mod/go.sum), a Gradle version catalogue, a Maven POM, an sbt build (build.sbt), composer.json, package.json, a Dart pubspec.yaml, an Elixir mix.exs/mix.lock (Hex), a rebar.config / erlang.mk DEPS (Hex), a Ruby Gemfile/Gemfile.lock or .gemspec (Bundler/RubyGems) — not scanned yet).
- D44 Platform End-of-Life — Platform end-of-life not assessed — this repository declares no platform this pass reads
- D6 Cohesion (LCOM4) — Cohesion (LCOM4) was not measured: of the 6 type(s) found, none both holds instance state and has two or more methods whose shared use of it could be read (1 with fewer than two methods, 5 stateless), so LCOM4 is undefined for every type in this repository. Not scored — the metric does not apply here, and this is not a finding about this repository.
- D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
- DM1 Domain Modelling — not scored — this repository shows none of the 3 signals this lens looks for
- ED1 Event-Driven — not scored — this repository shows none of the 3 signals this lens looks for
- ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
- ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
- GD1 Unfinished & placeholder code — no source files were read — this check reads C#, F#, JavaScript/TypeScript, Dart, Ruby, Scala, Rust and Java, and none was read for this repository's product. That is a limit of the analyzer, not a finding about your code.
- IC1 Incompleteness & stubs — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- M4 Documentation accuracy — Not applicable: the 1 current-state document(s) make no claim of a kind M4 checks.
- P12 CI test-gate honesty — no CI workflow found
- P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
- P9 Domain vs controller coverage — coverage not measured: this check compares the coverage of the analyzer's own test run across the domain and web layers, and that run measured none here — Test coverage (D8) says why
- PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for tinybench, mitata, benchmark.js, benny or vitest `bench(...)` calls in files that import them (or `*.bench.*` files), or one of those in a package.json, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
- PF2 Allocation hygiene — Not scored: this check counted allocation-aware idioms (Span, pools, stackalloc) per line, which describes what kind of code a repository is rather than whether it has an allocation problem, so it was withdrawn. Nothing here is a finding about your code.
- PF3 Async & latency hygiene — Not applicable: PHP has no async/await function colour, so there is no asynchronous code for a blocking call to stall.
- S1 Web-Security Posture — Not assessed: these web-security controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks web-security controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- X1 Async correctness — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X12 Unreachable branch — X12 reached only 1% of this repository's production lines — php (7,576 lines) was left unread. Not scored: a score over a minority of the product would be published as the whole of it.
- X13 Undrained process stream — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X14 Bypassable address classification — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X15 Unvalidated length from an untrusted reader — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X17 Uncapped recursion over a caller-supplied document — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X18 Disposal-pattern correctness — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X19 Unrestored process-global state — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X2 Cancellation propagation — no C# was loaded; this repository's PHP was read and makes no request a caller can cancel (amphp's HttpClient or connect) — synchronous PHP offers its callers no cancellation to take
- X20 Mistyped argument guard — This check asks whether an argument guard reports an EMPTY value as a NULL one, which needs a language that throws a null-specific argument exception — .NET's ArgumentNullException, the JVM's NullPointerException, Dart's ArgumentError.notNull. This repository contains none of those languages: the ones it is written in have a single exception for a bad argument, so there is no pair of exceptions to confuse and nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
- X21 Side-effecting pattern guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X22 Contradicted release guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X23 Unguarded diagnostic materialisation — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X24 Document value interpolated into markup unescaped — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X25 Inert configuration knob — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X26 Unsynchronised callback handoff — Not applicable: this check looks for a collection written by a callback on one thread while the body waiting on it touches it on another, and in this repository's languages no collection is reachable from two threads at once. PHP gives a request one thread of its own; the event-loop libraries (ReactPHP, Amp) run callbacks one at a time, and ext-parallel copies every value across its channels, so no array or collection is reachable from two threads at once. TypeScript/JavaScript runs every callback on the one thread that owns its objects: a callback runs only when the body waiting on it has yielded, never alongside it, and a worker thread receives a COPY of what it is sent. A SharedArrayBuffer carries raw bytes, never an Array, Map or Set, so no collection is reachable from two threads at once. Not a gap in the analyzer and not a finding about your code.
- X28 Index access outside its own emptiness guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X29 Per-element action decided by a fixed element — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X30 Support guard that admits what it rejects — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
- X4 Structured logging — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X7 Silent fallback defaults — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Appendix A — Findings (grouped)
Critical — 7 finding(s)
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- No automated tests
Serious — 81 finding(s)
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- Outbound HTTP without resilience vul/ssrf/ssrf.php:49
- Outbound HTTP without resilience REDACTED:34
- Swallowed exception (caught, then discarded) index.php:16
- Swallowed exception (caught, then discarded) pkxss/index.php:12
- Edited copy of a member (36 corresponding lines) inc/uploadfunction.php:4
- Edited copy of a member (17 corresponding lines) REDACTED:133
- Duplicated block (21 lines × 2) inc/uploadfunction.php:19
- Duplicated block (13–16 lines × 2) REDACTED:137
- Duplicated block (14 lines × 2) inc/uploadfunction.php:4
- Duplicated block (10–11 lines × 3) inc/uploadfunction.php:11
- Duplicated block (7 lines × 2) inc/mysql.inc.php:4
- Duplicated block (9 lines × 2) inc/mysql.inc.php:30
- Off the main sequence: inc
- No CI pipeline
- No structured logging
Minor — 11 finding(s)
- Duplicated predicate REDACTED:13
- Duplicated predicate vul/fileinclude/fi_local.php:21
- Duplicated predicate REDACTED:24
- Duplicated predicate REDACTED:35
- No ADRs found REDACTED:1
- REDACTED
- No ADRs
- No architecture diagram/doc
- No src/ separation
- No SAST
- PHP static analysis does not check null everywhere
Appendix B — Reproduction & audit trail
| Dimension | Tool | Version | Command | Findings | Raw output |
|---|---|---|---|---|---|
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-c0d23b786d3741c39b84df92db8396b5/history.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-c0d23b786d3741c39b84df92db8396b5/tree.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-tree.json |
| D29 · Static Analysis (SAST) | semgrep | — | semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/canine-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off --exclude *.arrow --exclude *.avro --exclude *.csv --exclude *.dat --exclude *.db --exclude *.feather --exclude *.geojson --exclude *.h5 --exclude *.hdf5 --exclude *.jsonl --exclude *.log --exclude *.ndjson --exclude *.npy --exclude *.npz --exclude *.orc --exclude *.parquet --exclude *.pickle --exclude *.pkl --exclude *.psv --exclude *.sqlite --exclude *.sqlite3 --exclude *.tfrecord --exclude *.tsv --exclude *.txt --exclude assets/font-awesome/4.5.0/css . | 69 | artifacts/raw/semgrep.json |
| D30 · Dependency Vulnerabilities | none (no readable dependency manifest) | — | none (no readable dependency manifest): not applicable — Not scored — no dependency manifest in a supported ecosystem was read for this repository. A gap in the analyzer's language coverage, NOT a finding that the repository is free of vulnerable dependencies (a Python pyproject.toml/requirements.txt (pip/uv/Poetry), a Swift Package.swift/Package.resolved, a Cargo manifest, a Go module (go.mod/go.sum), a Gradle version catalogue, a Maven POM, an sbt build (build.sbt), composer.json, package.json, a Dart pubspec.yaml, an Elixir mix.exs/mix.lock (Hex), a rebar.config / erlang.mk DEPS (Hex), a Ruby Gemfile/Gemfile.lock or .gemspec (Bundler/RubyGems) — not scanned yet). | 0 | — |
| D31 · IaC & Container Security | trivy | — | trivy config --format json --quiet . | 5 | artifacts/raw/trivy-config.json |
| D32 · Data Compliance (PII/GDPR) | semgrep | — | semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that. | 0 | — |
| D36 · Supply-chain Provenance & Signing | provenance | — | provenance: not applicable — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .circleci, .buildkite, .woodpecker, .teamcity, .gitlab-ci.yml, .travis.yml, bitbucket-pipelines.yml, .drone.yml, .cirrus.yml, .woodpecker.yml, appveyor.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, .azuredevops/, Jenkinsfile); there is no build to attest provenance for. | 0 | — |
| D37 · Vulnerability-disclosure Policy | disclosure | — | disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed. | 0 | — |
| D40 · Network Egress Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here. | 0 | — |
| D41 · Kernel & Syscall Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here. | 0 | — |
| D42 · Runtime Threat Enforcement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here. | 0 | — |
| D43 · Malicious Dependencies | none (no readable dependency manifest) | — | none (no readable dependency manifest): not applicable — Not scored — no dependency manifest in a supported ecosystem was read for this repository. A gap in the analyzer's language coverage, NOT a finding that the repository is free of vulnerable dependencies (a Python pyproject.toml/requirements.txt (pip/uv/Poetry), a Swift Package.swift/Package.resolved, a Cargo manifest, a Go module (go.mod/go.sum), a Gradle version catalogue, a Maven POM, an sbt build (build.sbt), composer.json, package.json, a Dart pubspec.yaml, an Elixir mix.exs/mix.lock (Hex), a rebar.config / erlang.mk DEPS (Hex), a Ruby Gemfile/Gemfile.lock or .gemspec (Bundler/RubyGems) — not scanned yet). | 0 | — |