Public report of vuejs/vue-router, published 15 November 2026. It has the same score, grades and number of
findings as the full report. The details of security findings (where they are in the code, which known
vulnerabilities and which passwords or keys were found) are left out, so nobody can use them against the project.
Public
Executive reportMeasured under the Code Assurance Index, an open standard for code quality, using its published scoring rules (rubric version 2026.11.4). Assert signed this survey and filed it in the standard's public register, where anyone can look it up by its survey ID. Check this survey →
Signed and filed in the standard's public register, 15 November 2026, 04:11 UTC · Survey ID cd_2706aefa528a44229ccdafba207ae5f6
vuejs/vue-router
Measured 15 November 2026, 04:10 UTC, at code version 680ccc6
Dependency hygiene is not measured: Npm pinning read, dependency currency not (the committed lockfile resolved no direct production dependency).
Bus factor is not measured: No living knowledge left to concentrate.
CAI scoreAt riskDown 1 since the last survey
The score is built from these lenses. Each lens grades one area of the code, such as how easy it is to change or how well it is protected. The weakest lens counts most, so one weak area pulls the score down instead of being averaged away.
A small codebase: 6,700 lines of product code in 1 project, tests not counted · Estimated rebuild effort: under 0.1 person-years · Weakest lens: Production Readiness, 37
Findings by how serious they are
84 critical174 serious128 minor
11 dimensions are left out of the score. For each one, we either couldn't measure it in this code, or found no evidence of the safeguard we look for, such as a tested backup restore. They count neither for nor against the score, and Limitations lists each one with its reason.
This survey was produced by
Canine Code Analyzer
Producer
Canine Development
Analyzer
Canine Code Analyzer engine 1.0.0
Measured
15 November 2026, 04:10 UTC
A measurement, not a certificate. The Code Assurance Index records a number
together with the evidence it was worked out from, so anyone can recalculate it, but it doesn't certify or guarantee
the code. The standard was written by Canine Development, which also builds the Canine Code Analyzer. It is open to any tool that
implements it, and today the Canine Code Analyzer is the only one that does.
A critical security finding is open, such as a library with a known critical vulnerability or a password or key found in the code. The score itself is unchanged, but its band shows At risk until the finding is fixed. See the Security and Compliance lens.
The score is deterministic, which means the same code always gets the same score. We work it out with tools that follow published rules, and an AI model never decides it, so anyone who applies the same rules to the same code gets the same number. How it is done is explained under Methodology ▸
54of 54 dimensions measured by tools.
361of 386 findings point to an exact file and line, so you can open each one in the code. The other 25 concern the repository as a whole, such as missing documentation.
54dimensions across 6 lenses, read from 6,700 lines of product code in 1 project.
vuejs/vue-router is rated At risk because critical security findings are open, most of them in the packages it uses. Its score is held back because we found no logging, tracing or health checks in the code and no automated security scanning of the code, its secrets or its dependencies. It scores 43 out of 100, which the At risk rating leaves unchanged.
Production Readiness, at 37, is the weakest lens and counts most in the score. The best first step is having someone learn and document the 16 files no active contributor knows, worth about 4 points. Adopting a logging library would lift Production Readiness itself, worth about 3 points. Raising Production Readiness to 70 would lift the score to about 48.
Seventy-seven known security holes in the packages the code depends on can be used by attackers. Three pipeline tools are referenced by a changeable name, so the build pipeline can be tampered with, and three images have no description for people who can't see them. Updating the vulnerable packages, pinning each tool to an exact version and describing the images would close these risks. Limiting each secret to its own step would fix the secret exposed to more of the pipeline than needed.
The product code is 6,700 lines, about €9,000 to rebuild.
A lens is capped at Adequate while one of its dimensions scores below 4 out of 10, however well the rest of the lens does. That way a serious problem in one place always shows in the lens's rating.
How the score is built: what each lens counts forThe lenses don't count equally. The weakest lens counts most, the next weakest a little less, and so on, so a weak area pulls the score down instead of being averaged away. In the bar below, each part's width shows how much that lens counts and its colour shows its rating. Improving the widest part moves the score most, and as that lens improves, it counts for less, because another lens becomes the weakest.
We compare every finding with the previous survey's. A finding that has only moved to another line in the same file counts as the same finding, so only new findings appear here. Advisory notes from the AI model are left out, because the model words them afresh in every survey.
Fixed since the last survey: 7 findings
These 7 critical or serious findings were in the previous survey, on 29 October 2026, and are gone from this one.
Test Coverage · No test reaches this file scripts/verifyCommitMsg.js
Test Coverage · No test reaches this file examples/auth-flow/components/About.vue
Test Coverage · No test reaches this file examples/auth-flow/components/Dashboard.vue
Test Coverage · No test reaches this file examples/lazy-loading/Baz.vue
Test Coverage · No test reaches this file examples/lazy-loading/Foo.vue
Dead Code · Dead file (~0 LoC) examples/lazy-loading/Foo.vue
A11y enforcement · Accessibility enforcement below the top rung
Rebuild cost: about €9,000 · Estimate
Cost to rebuild
€3,000 to €15,000, for 50 to 157 hours of work, under 0.1 person-years for one engineer
Difficulty of the problem
Standard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write.
Quality factor
×0.7 at a score of 43. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it.
Size
Small: 6,700 lines of product code
What it is not
Not a quotation: nobody has offered to build it for that. Not a valuation: it says nothing about what the business is worth. Not a certified figure: no professional has signed it as one.
How the estimate is made: We price the hours a team would need to write this code again, at €60 to €95 an hour. Declarations and boilerplate are priced at a fast rate and logic at a slower one, and the logic is then multiplied by the difficulty of the problem and by the quality factor. The estimate can be about 30% off either way, and it moves most with the hourly rate and the difficulty. For this code, every line is priced as straight logic, which keeps the estimate on the low side.
Top priorities
The three actions that raise the score most for the work they take. The full ranked list is in the Roadmap.
1
Resolve the 16 Orphaned file finding(s) in Knowledge Freshness — start with base.js, router.js, link.js.
Adopt pino (or winston) and log at meaningful points in the services you run.
Raises the score by about 3 points · Medium effort · Observability
3
Add a SAST step to CI running what this repository's stack ships: CodeQL's javascript-typescript pack, `semgrep --config=p/javascript`, or eslint-plugin-security — so a security regression fails the build instead of landing.
Each conclusion below combines several dimensions into one point that no single dimension shows, and lists the measurements it rests on.
Where the investment is most exposed · Value at risk
This code would cost about €9,000 to build again, under 0.1 person-years of work. Its weakest lens is Production Readiness, at 37 (Weak). Production Readiness is about whether the product is ready to run in production and to change without breaking. Because the weakest lens counts most in the score, work on Production Readiness also moves the score most.
Based on: the rebuild estimate · the Production Readiness grade · how much each lens counts
What to do: Start with the Production Readiness actions in Top priorities.
If you do one thing first · First action
Resolve the 16 Orphaned file finding(s) in Knowledge Freshness. Of all the actions in this report, it raises the score most for the work it takes: about 4 points for medium effort, because it clears the 16 Knowledge Freshness findings. The next survey will show the change in the score.
Based on: the ranked actions in Top priorities, by score gain and effort
Architecture: which parts of the code depend on which
The code is divided into modules, groups of code that each handle one part of the product, and a module depends on another when it uses code from it. The table lists the modules both down the side and across the top, in an order where each module should only use modules listed above it. A number in a cell means the module on that row uses the module in that column, and it counts the pairs of building blocks (types) that connect them. The one thing to look for is a mark above the diagonal line. It means two or more modules use each other in a loop (a dependency cycle), so none of them can be changed, tested or released on its own.
12 modules, with 11 dependencies between them. Every module uses only modules listed above it, so there are no loops.
Which modules use which. The module on each row uses the module in each column, and the number counts the pairs of types that connect them. A cell above the diagonal is part of a loop.
src.history.abstract uses flow.declarations, so a change to flow.declarations can break src.history.abstract, while a change to src.history.abstract can't break flow.declarations.
Position
Below the diagonal: src.history.abstract uses a module listed above it, which is the healthy direction.
src.history.abstract uses src.history.base, so a change to src.history.base can break src.history.abstract, while a change to src.history.abstract can't break src.history.base.
Position
Below the diagonal: src.history.abstract uses a module listed above it, which is the healthy direction.
src.history.hash uses flow.declarations, so a change to flow.declarations can break src.history.hash, while a change to src.history.hash can't break flow.declarations.
Position
Below the diagonal: src.history.hash uses a module listed above it, which is the healthy direction.
src.history.hash uses src.history.base, so a change to src.history.base can break src.history.hash, while a change to src.history.hash can't break src.history.base.
Position
Below the diagonal: src.history.hash uses a module listed above it, which is the healthy direction.
src.history.html5 uses flow.declarations, so a change to flow.declarations can break src.history.html5, while a change to src.history.html5 can't break flow.declarations.
Position
Below the diagonal: src.history.html5 uses a module listed above it, which is the healthy direction.
src.history.html5 uses src.history.base, so a change to src.history.base can break src.history.html5, while a change to src.history.html5 can't break src.history.base.
Position
Below the diagonal: src.history.html5 uses a module listed above it, which is the healthy direction.
Findings mapped to OWASP categories; the specific CVEs/secrets are in the Security dimension cards below and findings.md (redacted only on the public version of this report).
OWASP category
Findings
Severity
A03:2025 — Software Supply Chain Failures
122
High / Critical
A05:2025 — Injection
4
High / Critical
Roadmap
Top priorities: Resolve the 16 Orphaned file finding(s) in Knowledge Freshness — start with base.js, router.js, link.js; Adopt pino (or winston) and log at meaningful points in the services you run; Add a SAST step to CI running what this repository's stack ships: CodeQL's javascript-typescript pack, `semgrep --config=p/javascript`, or eslint-plugin-security — so a security regression fails the build instead of landing.
Ranked by impact ÷ effort. "Helps" is the estimated gain on the 0–100 health score.
Do this
Helps
Effort
Dimension
Resolve the 16 Orphaned file finding(s) in Knowledge Freshness — start with base.js, router.js, link.js.
Add a SAST step to CI running what this repository's stack ships: CodeQL's javascript-typescript pack, `semgrep --config=p/javascript`, or eslint-plugin-security — so a security regression fails the build instead of landing.
Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
Every finding carries one of four grades. Three say how serious it is. The fourth says this
survey could not settle it — and it is a grade, not a gap.
Critical — 84
A definite problem that already costs you something and drags the score down: a
missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here
tends to cause failures elsewhere.
Serious — 174
Likely wrong, but not failing yet. It degrades
the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to
carry for two years either.
Minor — 128
Recorded, with no effect on how the codebase functions.
Present so the survey is complete, not because it needs doing.
Could not be resolved — 11
Something this survey could not settle
from the outside, and which could be critical or serious. Either a control was required and no
positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves
nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean
result. These are excluded from the score rather than awarded a pass, so the number on the cover neither
rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each
one is named under Limitations.
Methodology & how to trust this report
This survey is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. All 54 evaluated dimensions are computed by tools and static analysis; no language model sets or judges any of them. Overall confidence is 0.8, the weighted average across measured dimensions.
Every figure here is one of two kinds, and we label which: ✓ Measured — a deterministic fact (LoC, complexity, coverage); ~ Modeled — an estimate from a stated model (cost, effort, value-at-risk), always a range with its assumptions, never a precise fact. We never present a modelled estimate as if it were measured. Perfect or absent scores carry their provenance too (ADR-0011): ✓ Tool-verified means the property itself was measured across the surface; ○ Nothing flagged means the probes came back clean — a claim bounded by what a repository can show; ⊘ Not evidenced means a working control (a tested restore, an automated rollback) showed no positive evidence — absence of evidence is not evidence of a control, so it's excluded from the score rather than awarded a spurious 10.
What we checked — 54 dimensions across the health lenses
Each chip is a dimension scored from real signals across architecture, testing, dependencies, security & compliance, documentation, git-history and code quality — in one coherent pass. A surface report typically covers a handful.
How to trust any code-health report — three questions
Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 361 of 386 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line. (Every path in this report is repo-relative by construction: paths are normalized at the producer and the report is rejected if any rooted path leaks through.)
Is there a tool behind the number? Every score below names the method that produced it: Roslyn, git or a scanner, not a narrative.
Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.
This report answers yes to all three. That's the bar to hold any assessment to.
Tools & methods
The actual versions used this run (captured at analysis time) — re-run on the same commit for the identical score.
Method
Backs
Version
Evaluator
Roslyn static analysis
Complexity, cohesion, coupling, dead code, API surface, layering
What ran differently this time — a tool absent, degraded, or that fell back to an estimate. Named openly, not folded silently into the scores. A degraded run also records its exact cause in diagnostics.md.
D8 Code Coverage — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Coverage NOT MEASURED: the JavaScript/TypeScript half could not be measured — the repository root runs jasmine, which the coverage collector does not drive yet, so no lcov was produced — a gap in the analyzer, not something this repository is missing. Coverage is excluded from the score rather than counted as a near-zero. This is OUR limitation, not a defect in the repo.
D11 Test Reliability — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Test reliability NOT MEASURED: the JavaScript/TypeScript suite could not be re-run in the analyzer sandbox — the jasmine run in the repository root produced no per-test report (TypeError: this.env.configure is not a function). This is OUR limitation, not a defect in the repo — it is excluded from the score.
D11 Test Reliability — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Test reliability for the jasmine suite in the repository root was NOT MEASURED: the jasmine run in the repository root produced no per-test report (TypeError: this.env.configure is not a function). This is OUR limitation, not a defect in the repository, and the suite is excluded from the measurement rather than counted against it.
D12 Dependency Hygiene — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. This repository's 1 package.json manifest(s) and its 1 committed lockfile(s) WERE read; what went unanswered is the currency half, because it grades the production `dependencies` a lockfile resolves and these manifests declare none — only 49 devDependencies, which D12 does not grade. So registry.npmjs.org was never asked, and there was nothing here for it to grade. This is a true statement about the repository and NOT a gap on our side: the lockfile was resolved, and no reader we could write would find a production dependency in it.
D14 License Compliance — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This repository declares no npm dependency a consumer installs, but 9 of the 48 code file(s) it ships carry a sign of vendored or bundled third-party code (for example `composables.js` states a licence of its own in its header; `composables.mjs` states a licence of its own in its header; `dist/vue-router.common.js` is committed build output, which a bundler can inline undeclared third-party code into; `dist/vue-router.esm.browser.js` is committed build output, which a bundler can inline undeclared third-party code into; `dist/vue-router.esm.browser.min.js` is committed build output, which a bundler can inline undeclared third-party code into). Code copied or bundled into a repository ships under its upstream licence, and this pass has no reader for it: it grades the licences of DECLARED packages only. So there is a licence to grade here and it was not graded — a missing collector, not a statement about this repository.
D16 Bus Factor — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. All 16 significant source file(s) were last meaningfully changed so long ago that no living knowledge remains — nothing since has been substantial enough to re-establish ownership (a broad, mechanical sweep that touches many files shallowly does not count, and neither does no activity at all). There is no concentration to measure, so the bus factor is not scored. This is not a clean bill: nobody currently holds working knowledge of this code (see D34 Knowledge Freshness). Counted over 14 of the 35 production source files in this repository: 19 are under the ~2,400-byte size floor this dimension measures over, and the remaining 2 have no attributable history left to measure.
D19 Documentation Quality — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. This kind did not reach the 95 % precision gate in three adjudicated runs (docs/plans/deterministic-engine/adjudication/D19-sample3-v3.md), so by the pre-registered fallback it publishes no row until a re-measurement shows it does. The candidates are counted here, not reported as findings, and the score does not include them.
D22 Internal API Consistency — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D22's deterministic call-shape rules are gated on C# first (docs/plans/deterministic-engine.md, P5): each other language is switched on only after its own concept suite and A/B gate pass. This says nothing about whether that surface is consistent.
D32 Data Compliance (PII/GDPR) — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. `src/history/base.js` produced a parse error, so every rule in this engine's `gdpr.yml` was absent there. That absence is NOT a clean result: these rules detect personal data crossing a boundary into a log sink, a URL or browser storage, and a file that was never parsed cannot report any of the three. The rest of the tree analysed normally and its rows above stand; only these files are unaccounted for. You can widen what we reach: fix the syntax error (or exclude the file deliberately) and re-scan to cover it.
D44 Platform End-of-Life — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This dimension reads a project's own statement about the platform it runs on: a TargetFramework in a .NET project file, a .nvmrc or .python-version, a capped requires-python, a Rust toolchain file or Cargo.toml rust-version, a .go-version, .java-version, .ruby-version, .tool-versions or .sdkmanrc, a go.mod go directive, a Maven or Gradle Java level or toolchain, a Gemfile's ruby directive, a mix.exs elixir requirement, a rebar.config minimum_otp_vsn, a pubspec.yaml SDK constraint, a build.sbt scalaVersion, or a framework major pinned by a dependency constraint. This repository carries none of them, so nothing about its platform was established. That is a gap in this analyzer's coverage, NOT a finding that the platform is supported — a language whose runtime is declared elsewhere (Package.swift, a Dockerfile) is simply not read here yet.
AXB2 Runtime readiness — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. The dev server exited, and its output does not match a cause we recognise. (rule: unrecognised-exit). The renderer reported: the dev server (`npm run dev`) exited before it served a page. Likely cause (not identified): the dev server exited, and its output does not match a cause we recognise. Last output: "at <repo>/node_modules/webpack/lib/NormalModule.js:358:12 / at <repo>/node_modules/loader-runner/lib/LoaderRunner.js:373:3 / at iterateNormalLoaders (<repo>/node_modules/loader-runner/lib/LoaderRunner.js:214:10) / at Array.<anonymous> (<repo>/node_modules/loader-runner/lib/LoaderRunner.js:205:4) { / opensslErrorStack: [ / 'error:03000086:digital envelope routines::initialization error', / 'error:0308010C:digital envelope routines::unsupported' / ], / library: 'digital envelope routines', / reason: 'unsupported', / code: 'ERR_OSSL_EVP_UNSUPPORTED' / } / Node.js v22.13.0" No runtime evidence was gathered.
AXR1 Runtime accessibility — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Render strategy: boot via DevServer (dev). the dev server (`npm run dev`) exited before it served a page. Likely cause (not identified): the dev server exited, and its output does not match a cause we recognise. Last output: "at <repo>/node_modules/webpack/lib/NormalModule.js:358:12 / at <repo>/node_modules/loader-runner/lib/LoaderRunner.js:373:3 / at iterateNormalLoaders (<repo>/node_modules/loader-runner/lib/LoaderRunner.js:214:10) / at Array.<anonymous> (<repo>/node_modules/loader-runner/lib/LoaderRunner.js:205:4) { / opensslErrorStack: [ / 'error:03000086:digital envelope routines::initialization error', / 'error:0308010C:digital envelope routines::unsupported' / ], / library: 'digital envelope routines', / reason: 'unsupported', / code: 'ERR_OSSL_EVP_UNSUPPORTED' / } / Node.js v22.13.0" No runtime evidence was gathered.
M4 Documentation accuracy — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. M4 checks only the claim kinds adjudicated at or above 95 % precision: links and versions (PREREGISTRATION version 9), and artefact counts an order of magnitude off. Paths, command arguments, installs, environment variables, settings, projects, packages, routes, cd targets, infrastructure products and removed modules are read but not checked, and none of them is reported or counted.
P1 CI/CD gates — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. A CI pipeline exists and the word "test" appears, but no explicit test-runner invocation (your stack's test command, or a test job) was matched — so either the gate runs tests through a step this pass could not recognise, or "test" is incidental here (a path, "latest", a reporter). Which of the two it is cannot be settled from this dimension's evidence; the coverage dimensions report whether a suite exists at all. You can widen what we reach: name the test runner explicitly in the pipeline step (your stack's test command, or a job named for the suite) so the gate is unambiguous to a reader and to this pass.
P5 DR & Backup — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. No backup/snapshot/replication config, RTO/RPO or restore-procedure documentation was found — and none applies: this repository publishes a library and deploys nothing (no container, IaC or deployment manifest), so it holds no runtime state of its own. Any data-access dependency it declares is the store it is a CLIENT for, not one it operates. The DR control belongs to whoever runs that data.
R4 Test Coverage — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. 4 further occurrence(s) are not listed individually; the score already reflects all 44.
R7 Dead Code — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. 2 further occurrence(s) are not listed individually; the score already reflects all 42.
X2 Cancellation propagation — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Go, PHP, Dart, Kotlin, Ruby, Scala, Java, Python and Rust source only, and no C# was loaded, and no named async function in this repository's JavaScript/TypeScript, nor any Go, PHP or Dart function or Kotlin suspend function, makes a request that can be cancelled (fetch, axios, ky, ofetch, got, undici, node:http; net/http, net.Dial; amphp; Dio; Ktor, OkHttp), so there is nothing to judge, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X4 Structured logging — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Python, PHP, Dart, Ruby, Scala and Rust source only, and no C# was loaded, and this repository's JavaScript/TypeScript, Python and PHP make no call through a named logger, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X5 Nullable reference types — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax and MSBuild project configuration, TypeScript source and its tsconfig files, Java source and its package and module declarations, PHP source and its PHPStan and Psalm configuration, Dart source and its pubspec language version, Ruby source and its Sorbet and Steep configuration, Scala source and its build's explicit-nulls, WartRemover and Scalafix settings, and Kotlin source only, and no C# was loaded, no TypeScript was found, and this repository's Vue components is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
Repo exclusion declarations: 2 pattern(s) declared (.gitattributes linguist-generated/vendored, .editorconfig generated_code) excluded 0 source file(s) from code-quality scoring. Declarations are the repo's own visible statement that a tree is machine-written or vendored — auditable in any diff, honored by GitHub the same way.
Limitations & what we did not check
We assess the repository exactly as committed, and only the repository. By design we do not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.
Per-dimension blind spots
For each dimension that was measured, what a static, repo-only scan structurally cannot see — the honest edge of the measurement, not a failure of it.
D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
D6 Cohesion (LCOM4): LCOM4 cohesion is syntactic — it infers connectivity from which methods touch which fields/methods by name, not from real runtime behaviour or intent.
D10 Test Quality: Assertion density is structural — it cannot tell a meaningful behavioural assertion from a trivial one, only that an assertion is present.
D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
D19 Documentation Quality: Documentation quality publishes two things only: a runnable or packaged unit with no example, and a multi-project root README that maps none of its parts. It does not judge clarity, and its other checks (overview, licence, boilerplate, structure, empty sections, XML-doc coverage) are withheld after adjudication: their candidates are counted in the card's gaps, not shown as rows. A false statement in a document is M4's; units are .NET projects only.
D24 Comment Value: Comment value is measured as redundancy only: a comment that repeats its code's words is found, but a paraphrase in other words, a vague comment, or one the code contradicts is not, and whether a comment is valuable is not claimed. Comments in other scripts or languages, and outside C#, are not judged.
D27 Navigability: Indirection/navigability is structural — it measures hops to follow a call, not whether that indirection buys real flexibility or just ceremony.
D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
AC1 Text alternatives: Alt-text is detected structurally — the scan sees that an alternative EXISTS, not whether it meaningfully describes the image, and decorative-vs-missing is judged by attribute shape; runtime-injected images and a non-role=img decorative svg are out of scope. This is accessibility readiness, never a WCAG conformance claim.
AC2 Forms & labels: Label association is read from static markup — a label wired up at runtime (JS-set aria-labelledby, framework-injected ids) reads as missing, a present label says nothing about whether its text is correct. A known UI-library field component (e.g. a JSX <TextField>) is now checked conservatively — flagged only when it carries NO label/aria-label/aria-labelledby/id/name — but wrapper/context-labelled libraries (Chakra/Radix FormControl+FormLabel) aren't statically visible (possible false positive) and non-JSX lowercased components are still skipped. A click handler on a plain element is now asked for a name too (it is a control the author declared), but the subtree test that answers it is deliberately generous: any DYNAMIC text expression in the subtree counts as a name, so an icon chosen by a ternary ({cond ? <IconA/> : <IconB/>}) reads as named, and a glyph component from a library the icon-import list does not know still names its parent. A clean result is "no unlabelled control found", not a labelling proof.
AC3 Page structure: Page structure is read from the static markup tree — landmarks, headings and lang injected at runtime aren't seen, heading ORDER is checked structurally (not against the rendered visual hierarchy), and lang/title/main fire only on full documents, never partials, and the data-table check sees header-cell presence (a <th> exists), not whether each header correctly associates with its cells. Static readiness, not conformance.
AC6 Visual & motion safety: Contrast and motion safety are PARTIAL by construction — literal colours (hex/rgb/hsl/named) in inline styles, in-repo <style> blocks, in-repo .css files, var() tokens, Tailwind neutral utilities and CSS-in-JS top-level declarations are read (same-rule/same-element colour+background pairs only); computed/runtime/theme colour, external-CDN stylesheets, CSS-in-JS dynamic (${…}) and nested-selector colours, cross-element pairs and image contrast stay out of reach, so a clean result is bounded by what the static CSS itself shows.
AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
M4 Documentation accuracy: Documentation accuracy checks links, versions and artefact counts against the tree: other claims (paths, commands, settings, routes) are read but not checked, and it cannot run the onboarding or measure how long a real new joiner takes.
P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".
P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.
What it measures: How tangled the control flow is — methods with many branches are hard to test and change.
Method: Cyclomatic complexity per method (1 + decision points), computed exhaustively across production source; test projects separated by convention. Deterministic.
+ 1 more group(s) — more in Appendix A; the complete list is findings.md.
What to do
Bring the 6 bodies over 15 down to 15 or less in Cyclomatic Complexity — start with install (cyclomatic 42), cb (cyclomatic 37), render (cyclomatic 36). — This score is capped by its worst body, so a finding fixed alone moves it by almost nothing — the next one down takes its place. Refactoring these 6 together lifts Cyclomatic Complexity from 8.3 to about 10.0/10, projected with the scoring formula itself and assuming each lands exactly at 15.
Detailed fixes: d1_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: How hard the code is for a person to follow, beyond raw branching.
Method: Cognitive complexity per method (Sonar-style nesting-penalized score), computed exhaustively over production code, excluding test projects. Deterministic.
+ 7 more group(s) — more in Appendix A; the complete list is findings.md.
What to do
Bring the 4 bodies over 30 down to 30 or less in Cognitive Complexity — start with render (cognitive 64), cb (cognitive 46), install (cognitive 40). — This score is capped by its worst body, so a finding fixed alone moves it by almost nothing — the next one down takes its place. Refactoring these 4 together lifts Cognitive Complexity from 6.3 to about 7.6/10, projected with the scoring formula itself and assuming each lands exactly at 30; a cleaner split scores higher.
Detailed fixes: d2_recommendation.md · top locations in Appendix A, every location in findings.md.
Do you agree with this assessment?
D3 · God Classes9.4 / 10Stronggated by 1 serious finding✓ Tool-verified
What it measures: Over-large classes that try to do too much ("god classes").
Method: God-class detection by line and method-count thresholds per logical type (partial classes unified), filtered for generated code and registration/contract false positives. Deterministic.
Resolve the 1 FunctionTooLong finding(s) in God Classes — start with create-matcher.js. — One of this dimension's main actionable groups (1 warning-level).
Detailed fixes: d3_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: How much of the production code is copy-pasted: the share of production lines inside a reported copy (every copy of a duplicated block or of an edited member, each line once), 10 at none and 0 at a quarter of the lines.
Method: Code duplication via token-stream sliding windows with type-aware normalization (locals masked, type names preserved), scored on the share of production lines inside a reported copy (each line once; 10 at none, 0 at a quarter). Deterministic.
What it measures: Whether a class's methods are focused on a single responsibility.
Method: LCOM4 cohesion per production class with at least two methods: connected components of methods sharing state or calls, computed syntactically. Deterministic, not a proxy.
Coverage: Exhaustive · type-level: LCOM4 cohesion computed over every production class — the population is all types, not a name convention.
D10 · Test Quality10.0 / 10Exemplary✓ Tool-verified
What it measures: Whether the tests truly assert behaviour rather than just running the code.
Method: Per-test assertions, skips, and mock references analyzed via Roslyn; structured skip-reason tags (BUG:/ENV:) separate documented deferrals from debt. Deterministic.
What it measures: Whether any secrets (keys, tokens, passwords) have leaked into the code.
Method: In-process native secret scanner (entropy plus signature patterns) across all tracked files; no external tool. A clean result is a measured 10, not no-data zero. Deterministic.
What it measures: Files that change often and are also complex — the riskiest hotspots.
Method: Per production file churn times cyclomatic complexity over a rolling window, computed from git and Roslyn/JS/Razor analysis. Exhaustive, deterministic per commit date.
What it measures: Acknowledged debt left in the code — TODOs, dead code, suppressed warnings.
Method: Roslyn syntactic debt markers (suppressions/TODO/FIXME/HACK/empty-catch/commented-code/Obsolete) plus SymbolFinder dead-code analysis; weighted-debt-per-KLoC density deducted 2.0x per unit. Deterministic, exhaustive.
0 deducted task-comment markers across 0 LoC (0.0/KLoC) → score 10.0. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.
What it measures: Whether the project's documentation is clear, complete, and useful.
Method: Every README, docs/ document and root guide parsed by its markup and measured in Unicode letters. Published: a runnable or packaged .NET project whose README (or a document it links, or a root guide) shows no example, and a root README naming none of three or more projects. Overview, licence, boilerplate, wall-of-text, empty-section and XML-doc rows are measured and withheld (counted in gaps) after adjudication. Deterministic, exhaustive, advisory.
What it measures: Whether comments are worth it — explaining WHY (valuable) rather than WHAT (redundant).
Method: Every inline C# comment compared word by word with the identifiers, literals and constructs of the code it annotates (taken from the syntax); a comment whose words that code already contains is redundant, as are closing-brace labels and generator template text. Comments giving a reason or a reference are kept; other scripts and languages are not judged. Deterministic, exhaustive, advisory.
1 of 145 judged comments only repeat the code they sit on (0.7 %). 10 comment(s) in another language or script were not judged.
redundant commenttest/e2e/runner.js:141
What to do
Resolve the 1 redundant comment finding(s) in Comment Value — start with runner.js. — One of this dimension's main actionable groups (1 recommendation-level).
Detailed fixes: d24_recommendation.md · top locations in Appendix A, every location in findings.md.
Do you agree with this assessment?
D27 · Navigability8.8 / 10Strong✓ Tool-verified
What it measures: How far you must trace to follow a call — low indirection and co-located slices read easier.
Method: Call indirection (interface hops, cross-namespace calls, slice-locality scaled) over a sampled set of method invocations, size-aware baseline. Sampled; confidence discounted by symbol-resolution gaps. C# also names each pass-through layer (a class whose every public method only forwards its own parameters to one collaborator) as a located finding; the score is not affected.
Coverage: Slice locality from the first namespace segments, SAMPLED (≤400 methods) — not exhaustive.
25 % of calls cross a namespace and 0 % go through an interface, but 0 % of collaborators are co-located — so following a call takes several hops. Baseline: small — navigation cost is tolerated.
What it measures: Whether any secrets were ever committed — scanned across the full git history, not just now.
Method: Secret scan via TWO gitleaks detect passes in an isolated checkout — the full git history, then a second --no-git pass over the working tree as it stands — merged and de-duplicated by (rule, file, line); each match flagged High. Both invocations are recorded in the audit trail. Exhaustive; when the tool is absent, or when its output cannot be parsed into the expected shape, the dimension is WITHHELD as an explicit measurement gap on our side — unscored and excluded from the lens, never a hedged middling score.
What it measures: Real static-analysis (SAST) findings — likely security bugs in the code, any language.
Method: Polyglot static analysis via semgrep across the repo using the pinned, image-baked p/security-audit + p/owasp-top-ten rulesets (no scan-time registry fetch); severity rules (ERROR/WARNING/INFO) map to a full-band severity-weighted score. Exhaustive, deterministic; degrades on parse failure.
Coverage: semgrep pattern rules over all files — exhaustive for the rule set, blind to classes of bug without a rule (clean = no rule matched).
4 finding(s): 0 critical, 4 high, 0 medium, 0 low. 2 unpinned-GitHub-Actions row(s) are reported here but scored by D36 (supply-chain provenance), which measures that posture as `pinned_actions` — one pinning decision is charged once, not once per lens. semgrep hit a parse error in 3 file(s) — `examples/multi-app/index.html` (line 17), `examples/restart-app/index.html` (line 12, line 13, line 14), `src/history/base.js` (lines 36–48) — so no absence of findings in the named regions is evidence of anything; rows reported elsewhere in those files are real. Fix the syntax error (or exclude the file deliberately) and re-scan to cover them.
REDACTED
REDACTED
REDACTED
What to do
Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
No action in Static Analysis (SAST) — all 2 REDACTED finding(s) are reported here at file:line but scored by D36 (supply-chain provenance), so none is charged to this dimension. — One of this dimension's main actionable groups (2 issue-level, 0 of them charged here).
Detailed fixes: d29_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: Whether any dependency has a known published vulnerability (CVE), direct or transitive, in ANY ecosystem the repository declares — Dart pub, Elixir and Erlang via Hex, Go modules, Java and Kotlin via Maven/Gradle, JavaScript/npm, .NET/NuGet, PHP/Composer, Python/PyPI, RubyGems, Rust/Cargo and Swift.
Method: Dependency-CVE scan across every ecosystem the repository declares, scored ONCE. Three sources are unioned and deduplicated by advisory identity (rule id + alias closure, CVE<->GHSA) scoped to package+version, keeping the worst severity: `osv-scanner --recursive` over osv.dev for Dart pub, Elixir/Hex (and Erlang, whose `rebar.lock` syft first converts to a CycloneDX SBOM the scanner reads, with rows attributed back to the lock), Go, Java and Kotlin via Maven/Gradle (and Scala, whose sbt build's pinned direct declarations are written into a CycloneDX SBOM the scanner reads, with rows attributed back to the build file), npm, PHP/Composer, Python/PyPI, RubyGems, Rust/Cargo and Swift; `trivy fs --scanners vuln` for npm lockfiles; and `dotnet list package --vulnerable --include-transitive` for NuGet (with per-advisory collapse of the project x target-framework fan-out), plus a DECLARED-dependency arm that resolves a published gem's gemspec against rubygems.org where no Gemfile.lock is committed. `SeverityScore(c,h,m,l, normalizer 8.0)`. NotApplicable only when NO ecosystem is readable; if any applicable ecosystem could not be scanned the findings are REPORTED and the score is withheld. Supersedes the npm and OSV arms, retired 2026-09-05. Advisory since rubric-2026.11.2 (CAI decision 0006): every row is a match against a vulnerability database that changes daily, so the reading is shown and never moves a scored dimension, lens or the headline.
+ 1 more group(s) — more in Appendix A; the complete list is findings.md.
What to do
Resolve the 57 High CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (57). — One of this dimension's main actionable groups (57 issue-level).
Resolve the 16 Critical CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (16). — One of this dimension's main actionable groups (16 issue-level).
Resolve the 3 High vulnerability finding(s) in Dependency Vulnerabilities — start with REDACTED (3). — One of this dimension's main actionable groups (3 issue-level).
Detailed fixes: d30_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: Whether anyone still has living knowledge of each file, or it has been orphaned — last understood long ago by someone now gone quiet. The sibling of the bus factor: D16 asks who owns it, D34 asks whether anyone still knows it.
Method: File orphaning as total living-knowledge decay below one focused-commit's worth within a year, computed per-file from the D16 decay model. Exhaustive, deterministic over fixed history.
16 of 16 significant source file(s) are orphaned — their living knowledge has decayed to nothing, so no one currently understands them. The largest is src/history/base.js. Counted over 16 of the 35 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.
Orphaned file · ×16src/history/base.js:1
Orphaned files with no living knowledge
What to do
Resolve the 16 Orphaned file finding(s) in Knowledge Freshness — start with base.js, router.js, link.js. — One of this dimension's main actionable groups (16 recommendation-level).
Resolve the 1 Orphaned files with no living knowledge finding(s) in Knowledge Freshness. — One of this dimension's main actionable groups (1 recommendation-level).
Detailed fixes: d34_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: Whether files that change together actually belong together — pairs that repeatedly co-change in git history despite having no explicit code dependency, surfacing the hidden/logical coupling (and boundaries in the wrong place) a static scan can't see.
Method: Pairwise co-occurrence over the per-commit file sets in git history (production source only — tests and generated dropped): Degree-of-Coupling = shared ÷ min individual revisions, reported above noise floors (each file ≥10 revisions, ≥5 shared commits, ≥50% strength); sweeping commits excluded. Deterministic over fixed history.
Coverage: Population: PRODUCTION source files only — test and generated files are dropped before pairing, so a class co-changing with its own test (trivially ~100%) can't drown the real production↔production coupling. Pairs ranked by Degree-of-Coupling. A non-source file is never a coupling PARTICIPANT either: documentation, schemas, config and data files are dropped with the rest, so a code↔docs pair — a command and the reference page that restates it — is not reported however strongly the two co-change; nor is coupling that runs THROUGH a build step or config file.
What it measures: Whether the build pipeline provides supply-chain integrity — generated provenance/attestation, signed artifacts (cosign/sigstore), an SBOM, and pinned build actions. Presence of the configuration, not a runtime guarantee.
Method: Supply-chain provenance/signing read deterministically from CI/build config (.github/workflows, .gitlab-ci.yml, azure-pipelines, Jenkinsfile, .circleci) + the release surface: four signals — generated provenance/attestation (SLSA/in-toto/actions-attest), artifact signing (cosign/sigstore/gitsign), an SBOM (syft/sbom-action/*.spdx.json/*.cdx.json), and SHA-pinned build actions — scored 10·present/denom. NotApplicable without a build pipeline. Detects configuration presence, not runtime enforcement.
+ 2 more group(s) — more in Appendix A; the complete list is findings.md.
What to do
Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 warning-level).
Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 warning-level).
Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).
Detailed fixes: d36_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: Whether any dependency the repository declares is published as MALICIOUS rather than merely vulnerable — a package that is an attacker's work, in any ecosystem osv-scanner reads. Reported apart from D30 because the answer is binary: there is no safe version to upgrade to, and the fix is to remove the package and rotate every credential it could have read.
Method: The same dependency scan D30 reads, partitioned on the scanner's own classification rather than rescanned: a row is MALICIOUS when its id is in the `MAL-` space (the ossf/malicious-packages feed) OR its `database_specific.cwe_ids` carries `CWE-506` ("Embedded Malicious Code"). Both channels are structural; the summary text is deliberately NOT read, because a malicious-package record whose summary says only "Critical severity vulnerability" is a real shape ([GHSA redacted]) and a text matcher misses it. Scored BINARY: any surviving row is 0, whatever its severity and however many CVEs sit beside it — a hostile dependency is not a quantity. Applicability and degradation are D30's: NotApplicable only when no ecosystem is readable, and an unscannable ecosystem degrades rather than reading clean. Advisory since rubric-2026.11.2 (CAI decision 0006): the malicious-package feed is a database that changes daily, so the reading is shown and never moves a scored dimension, lens or the headline.
No dependency in any ecosystem this repository declares is published as malicious.
✓ On the Gold path — maintain.
Detailed fixes: d43_recommendation.md.
Do you agree with this assessment?
Frontend & cross-cutting dimensions
R = React/JS · M = Maturity · P = Readiness.
AC1 · Text alternatives2.2 / 10Critical✓ Tool-verified
Other · Accessibility — Whether non-text content carries a text alternative — img/area/input[type=image] have alt, a meaningful svg has a title or aria-label, video has a captions track, and object/embed/canvas have a name or fallback content. Static markup readiness, not a WCAG conformance claim.
Method: Static markup-model scan: every img/area/input[type=image] checked for alt, svg[role=img] for a title/aria-label, video for a captions <track>. Components skipped, spreads suppressed. Deterministic, hard fact per element.
Coverage: Population: image/media elements — img, area, input[type=image], svg, video, object, embed, canvas — across the PARSED MARKUP files only (.html/.htm/.cshtml/.razor/.vue/.svelte/.jsx/.tsx); components, hidden subtrees and dynamic-attribute elements are skipped. Markup built in script — tagged-template (html`…`) UIs and hyperscript DOM factories — is NOT read by any producer, so it contributes no element to this population; where such a frontend is present the card discloses it as an analyzer gap rather than scoring around it.
An image with no alt (and no aria-label/aria-labelledby) is unreadable to assistive tech. Add alt — alt="" if it's purely decorative. (×3) — docs/.vuepress/components/HomeSponsorsGroup.vue:13, docs/.vuepress/theme/components/VueSchool/BannerTop.vue:9, docs/.vuepress/theme/components/VueSchool/BannerTop.vue:10
What to do
Add a text alternative — alt on images (alt="" for purely decorative ones), a title or aria-label on meaningful svg, an aria-label or inner fallback content on canvas, and a captions <track> on video.
Do you agree with this assessment?
AC2 · Forms & labels10.0 / 10Exemplary○ Nothing flagged
Other · Accessibility — Whether form controls have a programmatic label (an associated label, aria-label or aria-labelledby), buttons have text, links have an accessible name, a click handler on a plain element names the control it declares, fieldsets have a non-empty legend, known UI-library field components carry a label prop, and a placeholder isn't used as the only label. Static markup readiness, not a WCAG conformance claim.
Method: Static markup-model scan: inputs/selects/textareas checked for an associated label[for]/wrapping label/aria-label/aria-labelledby (per document), buttons for accessible text, fieldsets for a legend; placeholder-only labelling flagged. Deterministic, hard fact per control.
Coverage: Population: form controls, buttons, links, fieldsets and known UI-library field components in the PARSED MARKUP files only (.html/.htm/.cshtml/.razor/.vue/.svelte/.jsx/.tsx); components, hidden subtrees and spread/dynamic-attribute elements are skipped, so a control whose label arrives through a spread or a runtime expression is deliberately not judged. Markup built in script — tagged-template (html`…`) UIs and hyperscript DOM factories — is not read at all.
Other · Accessibility — Whether pages declare a language (well-formed BCP-47) and a non-empty title, expose exactly one main landmark and a sane heading order with non-empty headings, keep zoom enabled, title their iframes, give data tables header cells, and avoid meta-refresh. Static markup readiness, not a WCAG conformance claim.
Method: Static markup-model scan: html lang, document <title>, a main landmark and heading order on full documents only, plus zoom-disabling viewports, untitled iframes and meta-refresh anywhere. Deterministic, per structural checkpoint.
Coverage: Population: the PARSED MARKUP documents (.html/.htm/.cshtml/.razor/.vue/.svelte/.jsx/.tsx). The page-level checks — lang, title, single main landmark — fire ONCE PER FULL DOCUMENT (an <html> root) and never on a partial or component fragment, so a repo of fragments is assessed only on the per-element checks (heading order, table headers, iframe titles, meta-refresh, zoom). Markup built in script — tagged-template (html`…`) UIs and hyperscript DOM factories — is not read at all.
Other · Accessibility — Whether focus outlines aren't removed without a replacement, motion respects prefers-reduced-motion, and literal CSS colour pairs meet contrast — PARTIAL: inline styles, in-repo <style> blocks, in-repo .css files, var() tokens, Tailwind neutral utilities and CSS-in-JS literals are read (hex/rgb/hsl/named), never computed/runtime/external-CDN colour. Static markup readiness, not a WCAG conformance claim.
Method: Static markup/CSS scan: inline outline:none/0, literal inline colour/background contrast against the 4.5:1 AA floor, and <style>-block animation without a prefers-reduced-motion guard. Deterministic but PARTIAL — only inline styles and in-repo CSS literals are visible.
Coverage: Population: styled elements in the PARSED MARKUP files (.html/.htm/.cshtml/.razor/.vue/.svelte/.jsx/.tsx), plus in-repo <style> blocks, in-repo .css files and CSS-in-JS literals. Colour contrast is computed from LITERAL colour pairs only (hex/rgb/hsl/named, including var() tokens and Tailwind neutral utilities) — computed, runtime-themed and external-CDN colour is never resolved, so this is a partial read of contrast by construction. Markup built in script — tagged-template (html`…`) UIs and hyperscript DOM factories — is not read at all.
`#sponsors .become-sponsor:hover, .become-sponsor:hover` sets color: white on background-color: #4fc08d — 2.3:1, below the 4.5:1 WCAG AA minimum for normal text. Darken or lighten one of them. — docs/.vuepress/components/HomeSponsors.vue:80
What to do
Keep a visible focus style (don't remove the outline without a replacement), guard animation with prefers-reduced-motion, and raise low-contrast colour pairs to at least 4.5:1.
Other · Architecture — How the codebase splits by code ROLE — domain, application, infrastructure, test, generated. The significance map behind the knowledge/coupling weighting, and a DDD signal in its own right: a thin domain core under fat infrastructure is the anemic-domain smell, quantified. How each file's role is decided, because the split is only as good as that: a generated name or a build-output tree makes it Generated, a test project makes it Test, and otherwise the file's NAMESPACE and PATH words are matched against fixed vocabularies in a fixed ORDER — domain, then infrastructure, then application — so a file whose words hit two layers is counted under the earlier one. A production file matching none of them counts as application, so that share reads 'application or unclassified' rather than a measured application layer. Roles come from naming convention, never from what the code does. On this repository the split was taken from the source tree on disk rather than from a loaded .NET workspace, so a file's role is decided by its PATH segments alone — no declared namespace was available to add to the evidence — and generated output is excluded from the census entirely rather than counted as a generated share.
Method: Roslyn line-count by code ROLE: every source file classified Domain/Application/Infrastructure/Test/Generated by namespace + path convention (the shared CodeRoleClassifier), then significant lines summed per role. Deterministic; the advisory score is the business-logic (domain+application) share of production code.
Coverage: Population: ALL source files, each bucketed into ONE of five roles (Domain/Application/Infrastructure/Test/Generated) by namespace + path convention — a file whose layer isn't named in the convention falls to Application (the neutral default), and the split is line-count, not semantic depth or business value.
Other · Architecture — Whether the project-reference graph is acyclic (cycles block independent build/deploy and signal eroding boundaries).
Method: Project reference cycles via elementary-DFS over real .csproj references, using the engine shared with D5/D7; cyclic versus acyclic. Exhaustive, deterministic.
Other · Architecture — Whether dependencies point inward (Domain ← Application ← Infrastructure/Web) — the clean-architecture dependency rule, checked across the project graph.
Method: Layer violations by name-segment inference (Domain/Core to Application to Infrastructure/Web) over the project-reference graph. Exhaustive over all projects, deterministic.
Other · Code Health — Unreviewed-generation residue in this repository's JavaScript/TypeScript: functions whose whole body still throws a "not implemented" error, and placeholder text (lorem ipsum, changeme/replace_me…) left in strings and JSX of non-test, non-generated code. Scored as a quality signature, never as a claim about authorship.
Method: Roslyn syntax scan: NotImplementedException throws and placeholder string literals in non-test, non-generated shipped code. Deterministic, code-shape signature.
Other · Code Health — Unfinished work detected by code SHAPE, not keywords, in this repository's JavaScript/TypeScript: functions that only throw a "not implemented" error, functions that take inputs and return a constant or do nothing, async functions that never await, dead `if (false)` branches, and skeleton classes most of whose methods are holes.
Method: Roslyn syntax scan: incompleteness by code shape (constant-returning methods, async-never-await, #if false branches, guards that return what the code already falls through to, tests an earlier guard already decided, comparisons against NaN, skeleton types), not keyword-gated. Deterministic, code-shape heuristic.
Maturity · Maturity — Whether the repository and its projects have a README, and whether it is substantive.
Method: Filesystem scan: README presence, word count, and headings for depth; git history for staleness. Exhaustive across root and project dirs, deterministic.
Maturity · Maturity — Whether key decisions (ADRs) and the high-level shape (C4/diagrams) are written down.
Method: Filesystem scan: ADR folder/naming conventions or content, plus Mermaid/PlantUML/C4/architecture.md discovery. Exhaustive, deterministic.
No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.
What to do
Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
Add a C4 context/container diagram (Structurizr, PlantUML or Mermaid) or an architecture.md overview.
Maturity · Maturity — Whether the repository is organised deliberately: production code and tests are set apart in a way its ecosystem or the repository itself declares.
Method: Filesystem scan: src/test folder separation and namespace-prefix consistency (majority RootNamespace agreement). Exhaustive across projects, deterministic.
Maturity · Maturity — Whether the project's current-state documentation describes the code that exists.
Method: Every current-state document's checkable claims looked up in the tree (links, versions, and artefact counts an order of magnitude off), plus two README checks: an advertised infrastructure product with no footprint, and a module the CHANGELOG records as removed. Deterministic, no model. Advisory.
README.md names Vue 3, but the manifest declares `vue` ^2.7.0. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — README.md:6
docs/guide/README.md names Vue 3, but the manifest declares `vue` ^2.7.0. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/guide/README.md:4
What to do
Reconcile the README with reality: README.md names Vue 3, but the manifest declares `vue` ^2.7.0; docs/guide/README.md names Vue 3, but the manifest declares `vue` ^2.7.0.
Do you agree with this assessment?
P1 · CI/CD gates8.5 / 10Strong✓ Tool-verified
Readiness · Readiness — Whether an automated pipeline builds and tests every change.
Method: Filesystem scan: CI workflow files (.github/workflows, .gitlab-ci.yml, etc.) for build and test stages. Exhaustive, deterministic.
What to do
Run the test suite in CI via an explicit runner step (`yarn test` for the toolchain this pipeline already uses) and gate merges on it.
Do you agree with this assessment?
P10 · Library API & versioning10.0 / 10Exemplary○ Nothing flagged
Readiness · Readiness — For a library: a deliberate (small) public API surface and explicit semantic versioning so consumers can depend on it safely.
Method: Roslyn scan: public API surface area and semantic-versioning markers (SemVer attributes, changelog entries) for libraries; off .NET, a library is the ecosystem's publication act (an npm package that is not private and names an entry point, a PyPI distribution with a build system, a Rust library crate, a Maven/Gradle module that publishes, a Go module with no package main, a gemspec, a Composer library, a SwiftPM library product, a pub.dev or Hex package), its surface is the share of types the language's code model records as public (Rust, Swift, Java, Kotlin, Go, Dart; not measured where the model records no type visibility or, as in TypeScript, only module-level export), and its version is read from the manifest, a semver CHANGELOG, release tooling or semver git tags. Exhaustive, deterministic.
Do you agree with this assessment?
P2 · Observability0.0 / 10Critical✓ Tool-verified
Readiness · Readiness — Whether the code is diagnosable in production — structured logging, tracing/metrics, health checks.
No logging call was found in the 37 JavaScript/TypeScript production file(s) this check read across 1 module(s). Each was searched for its ecosystem's logging libraries (JavaScript/TypeScript: pino, winston, bunyan, log4js, loglevel, consola, the NestJS Logger) and for a call on a receiver named `log`/`logger` (or ending in `Logger`/`_logger`) with a level verb. It cannot see logging through a repo-local wrapper named otherwise, or in source it did not read — this is 'no logging found by this walk', not a verdict that nothing here logs. If it is right, production issues will be hard to diagnose.
What to do
Adopt pino (or winston) and log at meaningful points in the services you run.
Add a health-check endpoint (@godaddy/terminus or a /health route) so orchestrators and load balancers can probe liveness/readiness.
Readiness · Readiness — Whether SAST, secret/dependency scanning and performance benchmarking are wired in (presence, not runtime).
Method: Filesystem scan: SAST configuration, dependency-update automation, secret scanning, and a benchmark harness or benchmark step — in this repository's own ecosystem. Exhaustive, deterministic.
No static application security testing detected. For this repository's stack, add CodeQL's javascript-typescript pack, `semgrep --config=p/javascript`, or eslint-plugin-security as a CI step. What was searched, so you can tell an absence from a miss: the 2 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner.
`package.json` declares packages, and nothing in the repository keeps them current: no Dependabot or Renovate configuration that schedules updates, and no dependency-review gate on pull requests. A pinned dependency stays at the version it was added at until someone notices — including after an advisory is published against it. Add a `.github/dependabot.yml` with one `package-ecosystem` entry per ecosystem the tree uses (or an enabled `renovate.json`), and gate pull requests with `actions/dependency-review-action`. — package.json:84
What to do
Add a SAST step to CI running what this repository's stack ships: CodeQL's javascript-typescript pack, `semgrep --config=p/javascript`, or eslint-plugin-security — so a security regression fails the build instead of landing.
Enable Dependabot/Renovate or a dependency-review gate.
Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
Readiness · Readiness — Whether releases are automated and safely reversible (probes, rolling updates, approval gates) — from manifests/pipeline files, not the live environment.
Method: Filesystem scan: deployment manifests/IaC (K8s YAML, Helm, Terraform) for rolling updates, probes, approval gates, migration hooks. Exhaustive, deterministic.
The release is automated and no gate that pauses it for a human is DECLARED IN THIS REPOSITORY'S PIPELINE FILES. What was read: every file under `.github/workflows/`, `.forgejo/workflows/`, `.gitea/workflows/`, `.azuredevops/` and `.azure-pipelines/`, plus `.gitlab-ci*` and `azure-pipelines*` — with comment text stripped, so documenting a gate is not declaring one. What would have counted: GitLab's `when: manual`, CircleCI's `type: approval`, an Azure `ManualValidation@` task or an `approvals:` block, a Jenkins `input` step, a `uses:` step naming an approval action, an `environment:` paired with `reviewers` / `required_reviewers` / `protection` / `wait-timer` / `deployment_branch_policy`, a draft-release step, a `workflow_dispatch` promotion, or a release-event gate. ★ What this cannot see, because none of it is a file: a GitHub environment whose required reviewers are configured in repo SETTINGS, a branch protection rule, or an organisation deployment policy — all of them real, enforced gates that live outside the repository. If yours is one of those, this row is wrong and nothing in the tree could have told us. Otherwise: whatever the release trigger points at is published to users unreviewed, so a mistagged or unverified commit ships and the only remedy is a follow-up release.
What to do
Nothing pauses a release for a human: publish as a draft release (or gate the release job on a protected tag/manual dispatch) so a bad build can be stopped before users can download it.
Readiness · Readiness — Whether releases are traceable — a maintained changelog and explicit version stamping.
Method: Filesystem scan: changelog file presence and version tags in csproj or git tags. Exhaustive, deterministic.
Do you agree with this assessment?
R1 · Type Safety0.5 / 10Critical✓ Tool-verified
React / JS · Code Health — How much of the frontend is typed TypeScript vs untyped JavaScript.
Method: Frontend file inventory: the share of typed TypeScript vs untyped JavaScript across the source tree. Deterministic, exhaustive over frontend files.
2 typed · 39 plain JS — the untyped files are composables.js, composables.mjs, flow/declarations.js, scripts/verifyCommitMsg.js, src/components/link.js, src/components/view.js (+33 more).
Do you agree with this assessment?
R10 · Code Duplication4.7 / 10Weak✓ Tool-verified
React / JS · Code Health — The share of the scored frontend lines inside a near-exact copy-pasted block of substantial extent (the D4 clone algorithm over JS/TS tokens, D-386; each line once, 10 at none and 0 at a quarter of the lines, as D4): a block is reported only where its copies still agree on most of their own identifiers and literals, or were renamed as they were pasted but kept most of their constants, and where the copies carry enough code to stand on their own or the copied extent reaches 30 lines — so a re-implementation sharing neither names nor values, and a small pasted declaration, are both found and deliberately not reported, and a clean R10 is not a claim that nothing was copied.
Method: Near-exact copy-pasted blocks of substantial extent across the frontend (the D4 clone algorithm run over JS/TS tokens). Masking finds the candidates; a block is reported when its copies still agree on most of their own identifiers and literals, or when a renamed copy still agrees on most of its constants, AND the copies carry enough code to stand on their own — or when the copied extent reaches 30 lines. So a re-implementation sharing neither names nor values, and a small pasted declaration, are deliberately not counted. Scored on the share of the scored frontend lines inside a reported copy, on the same curve as D4. Deterministic.
composables.js:108 · composables.mjs:104 — the two spans are one implementation copied and then locally edited — 420 tokens are still identical, in the same order in both files, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one. — composables.js:108
composables.mjs:45 · src/composables/guards.js:5 — the two spans are one implementation copied and then locally edited — 207 tokens are still identical, in the same order in both files, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one. — composables.mjs:45
composables.js:22 · src/composables/globals.js:8 — the two spans are one implementation copied and then locally edited — 113 tokens are still identical, in the same order in both files, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one. — composables.js:22
composables.mjs:18 · src/composables/globals.js:8 — the two spans are one implementation copied and then locally edited — 103 tokens are still identical, in the same order in both files, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one. — composables.mjs:18
src/history/hash.js:17 · src/history/html5.js:16 — the 2 copies are spread across 2 files, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — src/history/hash.js:17
composables.js:156 · composables.mjs:152 · src/composables/useLink.js:21 — the 3 copies are spread across 3 files, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — composables.js:156
src/history/hash.js:59 · src/history/hash.js:72 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. — src/history/hash.js:59
src/history/abstract.js:17 · src/history/abstract.js:29 — the two spans are one implementation copied and then locally edited — 51 tokens are still identical, in the same order in both spans, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one. — src/history/abstract.js:17
src/router.js:171 · src/router.js:182 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. — src/router.js:171
src/history/html5.js:58 · src/history/html5.js:67 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. — src/history/html5.js:58
What to do
Act on each finding's own remediation rather than one rule: the move depends on what recurs. Where the copies are executable blocks, give the shared part one home and call it from each site; where they are declarations, a listing, a specialisation already delegating to its base, or one shape repeated per entity, there is no call site and the move is a shared type, a generated set or a factory — sometimes there is nothing to extract.
React / JS · Code Health — Per-function cyclomatic/cognitive complexity from the token-level function scanner (D-386) — real branching, not a regex heuristic.
Method: Per-function cyclomatic/cognitive complexity from a token-level function scanner (real branching, not a regex heuristic), computed over every frontend function. Deterministic.
render has cyclomatic complexity 34 and cognitive complexity 60; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — src/components/link.js:45
addRouteRecord has cyclomatic complexity 27 and cognitive complexity 33; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — src/create-route-map.js:57
normalizeLocation has cyclomatic complexity 21 and cognitive complexity 21; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — src/util/location.js:10
render has cyclomatic complexity 19 and cognitive complexity 24; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — src/components/view.js:14
install has cyclomatic complexity 16 and cognitive complexity 13; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive sits below cyclomatic here, so much of the count is breadth — arms side by side rather than stacked — and splitting per arm would leave a function per arm; group the work between the checks into named steps instead. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — src/router.js:21
isSameRoute has cyclomatic complexity 14 and cognitive complexity 14; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — src/util/route.js:73
match has cyclomatic complexity 13 and cognitive complexity 24; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — src/create-matcher.js:51
redirect has cyclomatic complexity 13 and cognitive complexity 16; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — src/create-matcher.js:97
createRoute has cyclomatic complexity 13 and cognitive complexity 12; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive sits below cyclomatic here, so much of the count is breadth — arms side by side rather than stacked — and splitting per arm would leave a function per arm; group the work between the checks into named steps instead. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — src/util/route.js:8
scrollToPosition has cyclomatic complexity 12 and cognitive complexity 17; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — src/util/scroll.js:139
guardEvent has cyclomatic complexity 12 and cognitive complexity 10; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive sits below cyclomatic here, so much of the count is breadth — arms side by side rather than stacked — and splitting per arm would leave a function per arm; group the work between the checks into named steps instead. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. (×3) — composables.js:116, composables.mjs:112, src/components/link.js:192
Do you agree with this assessment?
R3 · Large Files10.0 / 10Exemplary✓ Tool-verified
React / JS · Code Health — How many source files exceed the large-file threshold.
Method: Components/modules exceeding the large-file threshold, counted exhaustively across the frontend source tree. Deterministic.
Do you agree with this assessment?
R4 · Test Coverage3.8 / 10Weak✓ Tool-verified
React / JS · Readiness — Static test reachability (D-386): the share of production files reachable from any test via the import graph — measured without running anything.
Method: Static test reachability: the share of production files reachable from any test via the import graph — measured without running anything. Deterministic.
No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one. (×40) — composables.js:1, composables.mjs:1, examples/navigation-guards/app.js:1, …
What to do
Add tests that import the unreached modules (directly or through their public entry).
Do you agree with this assessment?
R6 · Tooling10.0 / 10Exemplary✓ Tool-verified
React / JS · Readiness — Whether the project wires up test, lint and typecheck — detected from each package.json script's COMMAND (eslint / tsc / vitest / jest / playwright), not just its name, and corroborated against CI-workflow invocations so a tool run only in CI still counts.
Method: package.json scanned for test/lint/typecheck script wiring. Deterministic presence check.
Do you agree with this assessment?
R7 · Dead Code1.0 / 10Critical✓ Tool-verified
React / JS · Code Health — Files unreachable from every application/tooling/test entry point, and exports nothing imports (module-graph reachability, D-386).
Method: Dead code: files unreachable from every application/tooling/test entry point plus exports nothing imports, via module-graph reachability. Deterministic, exhaustive over the import graph.
Unreachable from the 44 application, 7 tooling and 45 test entry point(s) detected in this repo. Gate removals on `yarn run dev:dist` — an undetected custom entry would make these reachable.
no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make (×29) — examples/navigation-guards/app.js, examples/keepalive-view/app.js, examples/composables/app.js, …
no import path from any entry point (44 application, 7 tooling, 45 test roots considered), but 3 in-repo import(s) from 3 other file(s) do name it (examples/auth-flow/app.js, examples/auth-flow/components/App.vue, examples/auth-flow/components/Login.vue) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it — examples/auth-flow/auth.js
no import path from any entry point (44 application, 7 tooling, 45 test roots considered), but 1 in-repo import(s) from 1 other file(s) do name it (examples/data-fetching/app.js) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it — examples/data-fetching/Post.vue
no import path from any entry point (44 application, 7 tooling, 45 test roots considered), but 1 in-repo import(s) from 1 other file(s) do name it (examples/auth-flow/app.js) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it (×4) — examples/auth-flow/components/App.vue, examples/auth-flow/components/Login.vue, examples/auth-flow/components/About.vue, …
no import path from any entry point (44 application, 7 tooling, 45 test roots considered), but 1 in-repo import(s) from 1 other file(s) do name it (examples/data-fetching/Post.vue) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it — examples/data-fetching/api.js
no import path from any entry point (44 application, 7 tooling, 45 test roots considered), but 1 in-repo import(s) from 1 other file(s) do name it (examples/route-props/app.js) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it — examples/route-props/Hello.vue
no import path from any entry point (44 application, 7 tooling, 45 test roots considered), but 1 in-repo import(s) from 1 other file(s) do name it (examples/lazy-loading/app.js) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it (×2) — examples/lazy-loading/Bar.vue, examples/lazy-loading/Baz.vue
What to do
Delete the dead files and unused exports — every line is maintenance cost and rebuild-estimate inflation with zero runtime value.
React / JS · Readiness — npm dependency truthfulness (D-386): unused dependencies, imports not declared anywhere, and type-/test-only packages shipped as production deps.
Method: npm dependency truthfulness: unused dependencies, imports declared nowhere, and type-/test-only packages shipped as production deps — from the manifest + import graph. Deterministic.
Declared in the root package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it. (×10)
What to do
Remove unused dependencies, declare unlisted imports explicitly, and demote type-/test-only packages to devDependencies.
React / JS · Architecture — Import cycles in the module graph (D-386) — files that can only be understood and changed together.
Method: Import cycles in the module graph, detected exhaustively over JS/TS imports (the same cycle detection as the .NET coupling dimension). Deterministic.
Other · Security — Read from this repository's JavaScript/TypeScript source: cryptographic hygiene (weak hash or cipher, key material fixed in the source) and outbound TLS (certificate validation, protocol version) — facts about code that hold whether or not it serves anything itself. This repository commits the configuration that serves its own HTTP surface, so that configuration was read in full for the security response headers it sets. Of the server controls, two are read where the source shows them: every session or sign-in cookie the code sets is read for HttpOnly, Secure and SameSite at the line that sets it (a raw `Set-Cookie` header, Express, Fastify, Hono, Koa, Next.js, `cookie.serialize`, express-session and cookie-session), and every Node listener for HTTPS enforcement. HSTS, security response headers and input validation are NOT assessed for JavaScript/TypeScript: each is scored as an absence, an absence is only reportable over the production HTTP server, and in this ecosystem the file that opens the port is build output or a framework launcher rather than a file in the source tree. Their absence here is not a finding about this repository.
Method: Roslyn plus filesystem scan: HSTS/security headers, secure cookies, input validation, middleware order, weak crypto (MD5/SHA1/DES); HTTPS-metadata context-aware. On a repository with no .NET source it reads JavaScript/TypeScript, Dart, Ruby, Scala, Rust or Elixir source itself (test, vendored, generated and minified paths not) for the arms that hold whether or not the code serves HTTP: a weak hash or cipher, key material fixed in the source, a TLS client that accepts any certificate, and (JavaScript/TypeScript, Ruby, Scala, Rust and Elixir) an obsolete TLS version; the server controls are not assessed there, and a Dart, Ruby, Scala, Rust or Elixir repository that serves no HTTP of its own is N/A on them. Deterministic.
None of the 11 security response headers the OWASP Secure Headers Project recommends (Content-Security-Policy, Strict-Transport-Security, X-Content-Type-Options, X-Frame-Options, …) is configured — defense in depth, even when a reverse proxy could set them. This is reported because `netlify.toml` configures this repository's static hosting, including its response headers, so the configuration that would carry these headers is in this repository and was read in full. (−2.0 on this card.) — netlify.toml:1
What to do
Set security response headers on the surface this repository serves: an `add_header` directive per header in the nginx/Caddy/Apache config, a `_headers` / `vercel.json` / `netlify.toml` entry for a static host, or `helmet()` in the HTTP server. `Content-Security-Policy` is the one that pays for itself first — it is what contains an injected script once one reaches the page — followed by `X-Content-Type-Options: nosniff` and a frame policy (`X-Frame-Options: DENY`, or CSP `frame-ancestors`). Where the app is served from a build container, the header configuration belongs in the image beside the built assets, so it ships with them rather than depending on where it lands.
Other · Code Health — Whether any branch is dead by construction — a switch arm whose label can never equal a case-normalised subject, or an `else if` whose predicate the arm above has already swallowed.
Method: Roslyn syntax + semantics: switch labels compared against the subject's own case normaliser, and if/else-if chains checked for a literal an earlier arm's containment test already swallows. Deterministic, provable per finding. Advisory.
Other · Code Health — Whether a loop that shortens a string until it fits a length budget has a floor — one with none grinds the value down to the empty string, or past it into a negative-length `Substring`.
Method: Roslyn syntax + semantics: while/do loops whose body's only effect on a string is to drop its last character, checked for whether anything — a direct comparison on the length, a body guard, a break — bounds that length below. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `while`/`do` loop whose body’s one assignment to a value is `x = x.slice(0, -1)` or `x = x.slice|substring|substr(0, x.length - 1)`, driven by a condition that reads `x.length` only as a term of a larger expression — never compared directly, never tested for truthiness, and with no other read of `x` — and whose body has no `break`, `return`, `throw` or `if` naming `x`. Deterministic, provable per finding. Advisory.
Other · Code Health — Whether a `when` guard is free of side effects — a guard that increments a counter or assigns while deciding whether its arm matches applies that change during PATTERN MATCHING, on an arm that may not be selected, and skips it entirely when a short-circuit to its left answers first.
Method: Roslyn syntax: `when` guards on case labels and switch-expression arms, read for a mutation (`++`/`--`/assignment) sitting in a position the guard's own `&&`/`||`/`??`/`?:`/`?.` can skip. Deterministic, provable per finding. Advisory.
Do you agree with this assessment?
X24 · Document value interpolated into markup unescaped10.0 / 10Exemplary○ Nothing flagged
Other · Security — Whether text read out of the document being converted is escaped before it is written into generated markup — a value the document's author chose, interpolated into an attribute the surrounding literal delimits, can close that attribute and open another.
Method: Roslyn semantic model over the whole compilation: a string-typed `Value`/`InnerText`/`InnerXml`/`Text` member declared inside `DocumentFormat.OpenXml` or `System.Xml` is a taint SOURCE, propagated through assignments, returns, arguments, tuple elements and string composition to its transitive closure, then read at interpolated-string holes that sit in a markup position the surrounding literal itself delimits. Escaper/encoder calls and enclosing validator conditions cut the flow. Flow- and container-insensitive by construction. A second arm needs no provenance at all and reports a type that CONTRADICTS ITSELF — the same expression escaped at one delimited markup hole and interpolated raw at another hole in the same markup position of the same type, which the type's own escaping proves is a defect without knowing where the value came from. On a repository with no .NET source it reads JavaScript/TypeScript off the token stream with the same rule: a DOM read of raw document text (`getAttribute`, `textContent`, `innerText`, `nodeValue`) is the source, propagated through local bindings and string composition, and judged at template-literal and concatenation holes in the same two delimited markup positions; escapers and validating conditions cut it, and documentation-site, test, vendored and minified scripts are not read. Deterministic, provable per finding. Advisory.
Do you agree with this assessment?
X29 · Per-element action decided by a fixed element10.0 / 10Exemplary○ Nothing flagged
Other · Code Health — Whether a decision taken once per element is taken ABOUT that element — a test inside a counted loop that reads a fixed subscript of the very collection its guarded statement indexes by the loop variable applies element zero's answer to all of them, so the elements that differ from it are all handled wrongly, and in the same direction.
Method: Roslyn syntax only, no semantic model: every `for` statement declaring exactly ONE loop variable, and every `if` inside its body that is not under a nested loop or a lambda. A site enters the population when the `if`’s condition never mentions the loop variable while the statement it guards indexes some collection by that variable ALONE (`c[i]`; `c[i + 1]` and `c[i, j]` are outside it). A finding additionally needs the AGREEING TWIN at the same-collection grain: the condition must read THAT SAME collection at a subscript that does not move — written into the condition, or reached through a local declared BEFORE the loop, so an alias bound inside the body is not followed. Both collection expressions must be simple identifiers. On a repository with no .NET source the same rule reads JavaScript/TypeScript off the engine’s own token stream (tests included, bundles and vendored paths not): a `for (let|var|const x = …; …; …)` with one declarator and a braced body, an alias followed only when it is declared before the loop in a block that encloses it and never assigned inside the loop. Deterministic, provable per finding. Advisory.
Other · Code Health — Whether exceptions are handled rather than silently swallowed or rethrown with lost stack traces.
Method: Roslyn syntax scan: every catch clause counted; empty catches and bare rethrows flagged. Population is all catch clauses, not estimated. Deterministic, hard fact.
An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it. — src/util/route.js:19
What to do
Swallowed exception (empty catch)
Do you agree with this assessment?
WCAG coverage — what static analysis assessed
Statically assessed 13 of 55 WCAG 2.2 Level A/AA success criteria (24%; ≈26% of the 50 WCAG 2.1 AA criteria for EN 301 549). The other 42 require runtime or manual evaluation. Partial signal only (a clean result is necessary, not sufficient; static analysis fully verifies none). This is accessibility readiness, not a conformance claim — a WCAG conformance claim requires manual evaluation (WCAG-EM 1.0).
The score is the rank-weighted fold of these lenses (worst-heaviest), each including its meta-dimensions; a lens with a Critical contributor is capped at Fair (its band reads "gated by …") and is never the strongest area however high its average.
Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Unscored — 3 check(s) recorded observations but carry no score
These checks ran and found something, but they do not carry a score — either by design (an advisory check reports evidence rather than grading it) or because they could not be scored here. They are excluded from the score for that reason, not because there was nothing to see.
D12 Dependency Hygiene — 85 observation(s) recorded · Dependency currency not established — this repository declares no production dependency to grade
P12 CI test-gate honesty — 1 observation(s) recorded · Reported, not scored — this card publishes what the CI gate does with the test inventory rather than grading it. The findings above are its output.
X10 Duplicated predicate — 9 observation(s) recorded · Advisory — this card reports evidence and never carries a score.
Not evidenced — 1 control(s) we could not find positive evidence for
These checks grade a working control, and the repository shows no evidence of one. That is deliberately not scored as a zero: a repository cannot show an ops runbook, a database TTL or an infrastructure-side audit log, so absence of evidence here is not evidence the control is missing. It is also not a statement that the check is irrelevant to this codebase — the thing it grades applies; we just could not see it. Excluded from the score either way.
P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
Not included — 71 check(s) not relevant to this codebase
These checks had nothing to measure here (no tests, no git history, the codebase is small, or the architecture style doesn't apply), so they're omitted above rather than scored low.
AC4 Keyboard semantics — No interactive element found in the parsed markup — AC4 not applicable here.
AC5 ARIA correctness — No ARIA usage found in the parsed markup — AC5 not applicable here.
AX1 Captive dependencies — Not applicable: this repository's JavaScript imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's.
AX2 Stateful singletons — Not applicable: TypeScript/JavaScript runs each process's requests on one event loop, so no two requests write a shared object at the same instant (interleaving across an await is a different defect).
AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX6 Interface segregation — no exported interface declares behaviour
AX7 Slice cohesion — not applicable — not a vertical-slice architecture
AX8 Test isolation — no test/production split to check
AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
AXR1 Runtime accessibility — the dev server (`npm run dev`) exited before it served a page. Likely cause (not identified): the dev server exited, and its output does not match a cause we recognise. Last output: "at <repo>/node_modules/webpack/lib/NormalModule.js:358:12 / at <repo>/node_modules/loader-runner/lib/LoaderRunner.js:373:3 / at iterateNormalLoaders (<repo>/node_modules/loader-runner/lib/LoaderRunner.js:214:10) / at Array.<anonymous> (<repo>/node_modules/loader-runner/lib/LoaderRunner.js:205:4) { / opensslErrorStack: [ / 'error:03000086:digital envelope routines::initialization error', / 'error:0308010C:digital envelope routines::unsupported' / ], / library: 'digital envelope routines', / reason: 'unsupported', / code: 'ERR_OSSL_EVP_UNSUPPORTED' / } / Node.js v22.13.0" No runtime evidence was gathered. This is a statement about this run, not a statement about your application: nothing here says the surface is inaccessible, only that it was never rendered.
C1 Data Protection — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a TypeORM/MikroORM/sequelize-typescript/NestJS-Mongoose entity, a Mongoose schema, a Sequelize or Drizzle table, a Knex migration or a Prisma model — and no database or data-store client in the source either, so this repository keeps no data at rest for these controls to protect. If it does persist personal data (through a hosted backend configured outside this repository, for instance), the controls belong to wherever that data is stored.
C2 Access Controls — No access-control surface detected in the analyzed source — this repository stands up no server (no Express, Fastify, Koa, Hono, NestJS or similar app, no Next.js/SvelteKit/Nuxt server route, no edge function), creates no Supabase tables and talks to no hosted backend. Access control is therefore N/A here — a browser application or library is authorized by the server it calls, not by itself; a client-side route guard hides a page and authorizes nothing. If this codebase grows request handlers, the dimension reactivates and a default-deny posture is expected then.
C3 Audit Trail — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a TypeORM/MikroORM/sequelize-typescript/NestJS-Mongoose entity, a Mongoose schema, a Sequelize or Drizzle table, a Knex migration or a Prisma model — and no database or data-store client in the source either, so this repository keeps no sensitive data whose changes an audit trail would record. If it does (through a hosted backend configured outside this repository, for instance), the trail belongs to wherever that data is stored.
C4 Data Retention — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a TypeORM/MikroORM/sequelize-typescript/NestJS-Mongoose entity, a Mongoose schema, a Sequelize or Drizzle table, a Knex migration or a Prisma model — and no database or data-store client in the source either, so this repository keeps no personal data whose lifetime a retention limit would bound. If it does (through a hosted backend configured outside this repository, for instance), the limit belongs wherever that data is stored.
C5 Data-Subject Rights — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a TypeORM/MikroORM/sequelize-typescript/NestJS-Mongoose entity, a Mongoose schema, a Sequelize or Drizzle table, a Knex migration or a Prisma model — and no database or data-store client in the source either, so this repository keeps no personal data for a data subject to erase, export or consent over. If it does (through a hosted backend configured outside this repository, for instance), the rights are served wherever that data is stored.
D11 Test Reliability — Test reliability not measured — JavaScript/TypeScript suite did not run
D14 License Compliance — Vendored third-party code's licences not graded — D14 grades declared npm dependencies only
D16 Bus Factor — dormant codebase — no living knowledge left to concentrate
D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
D20 ADR Quality — N/A — ADRs are expected on deployable products with a user-facing host, not consumed libraries; no ADR log is required here.
D21 Naming Consistency — N/A — too few peers to establish a naming convention (534 declarations, no unit with a dominant convention).
D22 Internal API Consistency — API consistency is measured on C# only; the exposed JavaScript surface was not measured.
D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ sibling projects each declaring an entity of their own or taking another project's integration events. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
D25 ADR Conformance — no ADRs to check
D26 Project Cohesion — This repository is one build unit, `(repository root)` (5811 LoC, 53 module-visible types across 22 directories), within the size bounds. Not scored: a single unit of this size gives project cohesion nothing to grade.
D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.
D32 Data Compliance (PII/GDPR) — 1 file(s) were not parsed by semgrep — the PII/GDPR ruleset never ran over them
D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
D44 Platform End-of-Life — Platform end-of-life not assessed — this repository declares no platform this pass reads
D5 Coupling — Not applicable — this npm build ships 1 production module(s), so there is no coupling BETWEEN modules to measure. (Its test and non-production modules are not part of the shipped graph.)
D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
D8 Code Coverage — Coverage not measured — JavaScript/TypeScript suite
DM1 Domain Modelling — not scored — this repository shows none of the 3 signals this lens looks for
ED1 Event-Driven — not scored — this repository shows none of the 3 signals this lens looks for
ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
P7 Outbound HTTP resilience — not applicable — no HTTP server, API framework or worker entry point was found in the JavaScript/TypeScript source, so there is no service whose uptime a failing dependency could take down
P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
P9 Domain vs controller coverage — coverage not measured: this check compares the coverage of the analyzer's own test run across the domain and web layers, and that run measured none here — Test coverage (D8) says why
PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for tinybench, mitata, benchmark.js, benny or vitest `bench(...)` calls in files that import them (or `*.bench.*` files), or one of those in a package.json, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
PF2 Allocation hygiene — Not scored: this check counted allocation-aware idioms (Span, pools, stackalloc) per line, which describes what kind of code a repository is rather than whether it has an allocation problem, so it was withdrawn. Nothing here is a finding about your code.
PF3 Async & latency hygiene — Not applicable: this repository declares no async functions, so there is no asynchronous code for a blocking call to stall.
R11 Import Boundaries — No recognizable feature-sliced/layered src layout — boundary rules not applicable.
R5 Dependency Freshness — uses a yarn lockfile — dependency freshness not measured here; JS/npm CVEs are scored in D30 (Dependency Vulnerabilities), which answers every ecosystem
SC1 Supply-chain hygiene — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
X1 Async correctness — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X13 Undrained process stream — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X14 Bypassable address classification — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X15 Unvalidated length from an untrusted reader — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X17 Uncapped recursion over a caller-supplied document — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X18 Disposal-pattern correctness — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X19 Unrestored process-global state — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X2 Cancellation propagation — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X20 Mistyped argument guard — This check asks whether an argument guard reports an EMPTY value as a NULL one, which needs a language that throws a null-specific argument exception — .NET's ArgumentNullException, the JVM's NullPointerException, Dart's ArgumentError.notNull. This repository contains none of those languages: the ones it is written in have a single exception for a bad argument, so there is no pair of exceptions to confuse and nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
X22 Contradicted release guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X23 Unguarded diagnostic materialisation — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X25 Inert configuration knob — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X26 Unsynchronised callback handoff — Not applicable: this check looks for a collection written by a callback on one thread while the body waiting on it touches it on another, and in this repository's languages no collection is reachable from two threads at once. TypeScript/JavaScript runs every callback on the one thread that owns its objects: a callback runs only when the body waiting on it has yielded, never alongside it, and a worker thread receives a COPY of what it is sent. A SharedArrayBuffer carries raw bytes, never an Array, Map or Set, so no collection is reachable from two threads at once. Not a gap in the analyzer and not a finding about your code.
X27 Collection changed while being enumerated — Not applicable: this check looks for a loop whose body adds to or removes from the very collection the loop is walking, invalidating the enumerator it holds, and in this repository's languages that cannot happen. JavaScript and TypeScript have no iterator that a change can invalidate: an `Array` is walked by index against its live length, and a `Map` or `Set` by the ECMAScript specification's live entry list, so a body that adds to, removes from or empties what it walks raises nothing — every loop form (`for…of`, `for…in`, `forEach`, `map`, `filter`, `reduce`, `entries()`) on every built-in collection (`Array`, `Map`, `Set`, plain objects, `URLSearchParams`, `Headers`, `FormData`) runs to completion. Such a loop can still skip an element or never end, which is a different defect and not the one this check asks about. Not a gap in the analyzer and not a finding about your code.
X28 Index access outside its own emptiness guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X30 Support guard that admits what it rejects — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
X4 Structured logging — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X5 Nullable reference types — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
X7 Silent fallback defaults — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Appendix A — Findings (grouped)
The findings behind the scores, grouped by severity, then by dimension and kind. The high-severity issues are enumerated in full below; items per group are capped at 25 with any overflow stated explicitly per group, never silently truncated. The complete machine-readable list of every finding (all severities) is the companion findings.md in this report's bundle.
AC1 · Text alternatives· <img> without a text alternative · ×3
<img> without a text alternative docs/.vuepress/components/HomeSponsorsGroup.vue:13— An image with no alt (and no aria-label/aria-labelledby) is unreadable to assistive tech. Add alt — alt="" if it's purely decorative.
<img> without a text alternative docs/.vuepress/theme/components/VueSchool/BannerTop.vue:9— An image with no alt (and no aria-label/aria-labelledby) is unreadable to assistive tech. Add alt — alt="" if it's purely decorative.
<img> without a text alternative docs/.vuepress/theme/components/VueSchool/BannerTop.vue:10— An image with no alt (and no aria-label/aria-labelledby) is unreadable to assistive tech. Add alt — alt="" if it's purely decorative.
D30 · Dependency Vulnerabilities· High vulnerability · ×3
R4 · Test Coverage· No test reaches this file · ×40
No test reaches this file composables.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file composables.mjs:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file examples/navigation-guards/app.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file examples/keepalive-view/app.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file examples/composables/app.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file examples/redirect/app.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file examples/active-links/app.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file examples/basic/app.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file src/composables/useLink.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file examples/nested-routes/app.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file flow/declarations.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file examples/scroll-behavior/app.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file examples/hash-mode/app.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file examples/lazy-loading/app.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file examples/hash-scroll-behavior/app.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file examples/route-alias/app.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file examples/multi-app/app.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file examples/transitions/app.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file src/composables/guards.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file examples/restart-app/app.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file examples/route-params/app.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file examples/nested-router/app.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file examples/auth-flow/auth.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file examples/data-fetching/Post.vue:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
No test reaches this file examples/route-matching/app.js:1— No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
+ 15 more in this group — see findings.md.
D30 · Dependency Vulnerabilities· Medium CVE · ×27
Deprecated: babel-eslint package.json:91— babel-eslint 10.1.0, declared in package.json, is marked deprecated by its publisher: "babel-eslint is now @babel/eslint-parser. This package will no longer receive updates.". Replace it with the package or version that message names, or record why this one must stay.
Deprecated: chromedriver package.json:98— chromedriver 96.0.0, declared in package.json, is marked deprecated by its publisher: "Chromedriver download url has changed. Use version 114.0.2 or newer.". Replace it with the package or version that message names, or record why this one must stay.
Deprecated: conventional-changelog-cli package.json:99— conventional-changelog-cli 2.1.1, declared in package.json, is marked deprecated by its publisher: "This package is no longer maintained. Please use the conventional-changelog package instead.". Replace it with the package or version that message names, or record why this one must stay.
Deprecated: eslint package.json:104— eslint 4.19.1, declared in package.json, is marked deprecated by its publisher: "This version is no longer supported. Please see https://eslint.org/version-support for other options.". Replace it with the package or version that message names, or record why this one must stay.
Deprecated: rollup-plugin-buble package.json:118— rollup-plugin-buble 0.19.8, declared in package.json, is marked deprecated by its publisher: "This module has been deprecated and is no longer maintained. Please use @rollup/plugin-buble.". Replace it with the package or version that message names, or record why this one must stay.
Deprecated: rollup-plugin-replace package.json:120— rollup-plugin-replace 2.2.0, declared in package.json, is marked deprecated by its publisher: "This module has moved and is now available at @rollup/plugin-replace. Please update your dependencies. This version is no longer maintained.". Replace it with the package or version that message names, or record why this one must stay.
Deprecated: rollup-watch package.json:121— rollup-watch 4.3.1, declared in package.json, is marked deprecated by its publisher: "rollup-watch functionality is now included in Rollup itself". Replace it with the package or version that message names, or record why this one must stay.
Deprecated: vue package.json:125— vue 2.7.9, declared in package.json, is marked deprecated by its publisher: "Vue 2 has reached EOL and is no longer actively maintained. See https://v2.vuejs.org/eol/ for more details.". Replace it with the package or version that message names, or record why this one must stay.
Complex function guardEvent (cyclomatic 12, cognitive 10) composables.js:116— guardEvent has cyclomatic complexity 12 and cognitive complexity 10; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive sits below cyclomatic here, so much of the count is breadth — arms side by side rather than stacked — and splitting per arm would leave a function per arm; group the work between the checks into named steps instead. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes.
Complex function guardEvent (cyclomatic 12, cognitive 10) composables.mjs:112— guardEvent has cyclomatic complexity 12 and cognitive complexity 10; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive sits below cyclomatic here, so much of the count is breadth — arms side by side rather than stacked — and splitting per arm would leave a function per arm; group the work between the checks into named steps instead. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes.
Complex function guardEvent (cyclomatic 12, cognitive 10) src/components/link.js:192— guardEvent has cyclomatic complexity 12 and cognitive complexity 10; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive sits below cyclomatic here, so much of the count is breadth — arms side by side rather than stacked — and splitting per arm would leave a function per arm; group the work between the checks into named steps instead. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes.
Dead file (~0 LoC) examples/auth-flow/components/About.vue— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), but 1 in-repo import(s) from 1 other file(s) do name it (examples/auth-flow/app.js) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it
Dead file (~0 LoC) examples/auth-flow/components/Dashboard.vue— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), but 1 in-repo import(s) from 1 other file(s) do name it (examples/auth-flow/app.js) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it
Dead file (~0 LoC) examples/lazy-loading/Baz.vue— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), but 1 in-repo import(s) from 1 other file(s) do name it (examples/lazy-loading/app.js) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it
Dead file (~78 LoC) examples/hash-scroll-behavior/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~78 LoC) examples/route-alias/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~51 LoC) examples/auth-flow/auth.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), but 3 in-repo import(s) from 3 other file(s) do name it (examples/auth-flow/app.js, examples/auth-flow/components/App.vue, examples/auth-flow/components/Login.vue) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it
Dead file (~51 LoC) examples/data-fetching/Post.vue— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), but 1 in-repo import(s) from 1 other file(s) do name it (examples/data-fetching/app.js) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it
Dead file (~41 LoC) examples/lazy-loading-before-mount/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~41 LoC) examples/route-props/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Low contrast colour pair in CSS (2.3:1) docs/.vuepress/components/HomeSponsors.vue:80— `#sponsors .become-sponsor:hover, .become-sponsor:hover` sets color: white on background-color: #4fc08d — 2.3:1, below the 4.5:1 WCAG AA minimum for normal text. Darken or lighten one of them.
install (cyclomatic 42) src/router.js:21— install has cyclomatic complexity 42 (threshold 15). Of this number, 16 points are the body's own statements and 26 belong to 27 function items inside it that branch. To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
cb (cyclomatic 37) src/history/base.js:30— cb has cyclomatic complexity 37 (threshold 15). Most of this is not in the body itself: 1 of the 37 points is its own statement and the rest belongs to 28 function items inside it that branch (a function literal at line 196, a function literal at line 117, go::push::replace::ensureURL::getCurrentLocation::confirmTransition, …). The named helpers are already separate functions; the literals' work cannot be called, reviewed or tested from outside this body. To reduce it, move the named helpers out of the body to the enclosing scope and lift each literal's work into a named function there, so each is measured, reviewed and tested on its own, and reduce whichever one then reads as the largest.
render (cyclomatic 36) src/components/link.js:45— render has cyclomatic complexity 36 (threshold 15). Of this number, 34 points are the body's own statements and 2 belong to 2 function items inside it that branch. To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
create-route-map.addRouteRecord (cyclomatic 28) src/create-route-map.js:57— create-route-map.addRouteRecord has cyclomatic complexity 28 (threshold 15). Of this number, 27 points are the body's own statements and 1 belongs to one function literal inside it that branches. To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
render (cyclomatic 26) src/components/view.js:14— render has cyclomatic complexity 26 (threshold 15). Of this number, 19 points are the body's own statements and 7 belong to 3 function items inside it that branch. To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
location.normalizeLocation (cyclomatic 21) src/util/location.js:10— location.normalizeLocation has cyclomatic complexity 21 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
render (cognitive 64) src/components/link.js:45— render has cognitive complexity 64 (threshold 15). Drivers by points: if/else 20 (34 pts), ternaries 9 (15 pts), boolean chains 9, loops 2 (6 pts) (nesting depth added 24). Of this number, 60 points are the body's own statements and 4 belong to 2 function items inside it that branch. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
cb (cognitive 46) src/history/base.js:30— cb has cognitive complexity 46 (threshold 15). Drivers by points: if/else 22 (29 pts), boolean chains 12, ternaries 3, error handling 2 (nesting depth added 7). None of this is in the body itself: all 46 points belong to 28 function items inside it that branch (a function literal at line 196, go::push::replace::ensureURL::getCurrentLocation::confirmTransition::abort, a function literal at line 117, …). The named helpers are already separate functions; the literals' work cannot be called, reviewed or tested from outside this body. To reduce it, move the named helpers out of the body to the enclosing scope and lift each literal's work into a named function there, so each is measured, reviewed and tested on its own, and reduce whichever one then reads as the largest.
install (cognitive 40) src/router.js:21— install has cognitive complexity 40 (threshold 15). Drivers by points: if/else 18 (20 pts), boolean chains 13, ternaries 6, match/switch 1 (nesting depth added 2). Most of this is not in the body itself: 13 of the 40 points are its own statements and the rest belongs to 27 function items inside it that branch (init, a function literal at line 100, init::handleInitialScroll, …). The named helpers are already separate functions; the literals' work cannot be called, reviewed or tested from outside this body. To reduce it, move the named helpers out of the body to the enclosing scope and lift each literal's work into a named function there, so each is measured, reviewed and tested on its own, and reduce whichever one then reads as the largest.
create-route-map.addRouteRecord (cognitive 37) src/create-route-map.js:57— create-route-map.addRouteRecord has cognitive complexity 37 (threshold 15). Drivers by points: if/else 11 (17 pts), ternaries 6 (10 pts), boolean chains 8, loops 1 (2 pts) (nesting depth added 11). Of this number, 35 points are the body's own statements and 2 belong to one function literal inside it that branches. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
render (cognitive 30) src/components/view.js:14— render has cognitive complexity 30 (threshold 15). Drivers by points: if/else 10 (15 pts), boolean chains 12, ternaries 1 (2 pts), loops 1 (nesting depth added 6). Of this number, 24 points are the body's own statements and 6 belong to 3 function items inside it that branch. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
resolveAsyncComponents (cognitive 28) src/util/resolve-components.js:7— resolveAsyncComponents has cognitive complexity 28 (threshold 15). Drivers by points: if/else 9 (18 pts), ternaries 2 (5 pts), boolean chains 3, error handling 1 (2 pts) (nesting depth added 13). None of this is in the body itself: all 28 points belong to 4 function literals inside it that branch (lines 13, 38, 23, …). The decisions are inside those literals, which nothing outside this body can call, review or test on its own, so splitting the enclosing body is not the move available here. To reduce it, lift the literals' work into a named function or method at the enclosing scope and have each literal call it, then reduce whichever part then reads as the largest.
create-matcher.createMatcher.match (cognitive 24) src/create-matcher.js:51— create-matcher.createMatcher.match has cognitive complexity 24 (threshold 15). Drivers by points: if/else 8 (17 pts), loops 2 (5 pts), boolean chains 2 (nesting depth added 12). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
createMatcher.match (cognitive 24) src/create-matcher.js:51— createMatcher.match has cognitive complexity 24 (threshold 15). Drivers by points: if/else 8 (17 pts), loops 2 (5 pts), boolean chains 2 (nesting depth added 12). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
resolve-components.resolveAsyncComponents.<returned closure> (cognitive 23) src/util/resolve-components.js:8— resolve-components.resolveAsyncComponents.<returned closure> has cognitive complexity 23 (threshold 15). Drivers by points: if/else 9 (18 pts), boolean chains 3, error handling 1 (2 pts) (nesting depth added 10). Most of this is not in the body itself: 1 of the 23 points is its own statement and the rest belongs to 3 function literals inside it that branch (lines 13, 23, 38). The decisions are inside those literals, which nothing outside this body can call, review or test on its own, so splitting the enclosing body is not the move available here. To reduce it, lift the literals' work into a named function or method at the enclosing scope and have each literal call it, then reduce whichever part then reads as the largest.
location.normalizeLocation (cognitive 21) src/util/location.js:10— location.normalizeLocation has cognitive complexity 21 (threshold 15). Drivers by points: if/else 8 (10 pts), boolean chains 9, ternaries 2 (nesting depth added 2). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition.
scroll.scrollToPosition (cognitive 17) src/util/scroll.js:139— scroll.scrollToPosition has cognitive complexity 17 (threshold 15). Drivers by points: if/else 7 (9 pts), ternaries 2 (5 pts), boolean chains 3 (nesting depth added 5). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
createMatcher.redirect (cognitive 16) src/create-matcher.js:97— createMatcher.redirect has cognitive complexity 16 (threshold 15). Drivers by points: if/else 8 (11 pts), ternaries 4, boolean chains 1 (nesting depth added 3). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.
FunctionTooLong: create-matcher.createMatcher src/create-matcher.js:19— FunctionTooLong — createMatcher runs 125 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 25 over it, 1.25× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
P12 · CI test-gate honesty· Coverage collected but not gated · ×1
Coverage collected but not gated — CI collects a coverage report but no step enforces a minimum — coverage could halve and CI stays green. Add a step that fails the build when coverage drops below a floor (your coverage tool's minimum-threshold flag, or a coverage-gate action) so the number guards something. What was searched, so you can tell an absence from a miss: this repository's CI files AND its coverage configuration — the well-known coverage and test-runner config files, read at the repository root and inside workspace package directories two levels down, so a floor declared beside the tests rather than in the pipeline is credited — matched against the threshold settings this check knows by name. A floor set in your coverage service's web UI rather than in a committed file, or under a setting whose name is not one of those, is not seen here.
No structured logging — No logging call was found in the 37 JavaScript/TypeScript production file(s) this check read across 1 module(s). Each was searched for its ecosystem's logging libraries (JavaScript/TypeScript: pino, winston, bunyan, log4js, loglevel, consola, the NestJS Logger) and for a call on a receiver named `log`/`logger` (or ending in `Logger`/`_logger`) with a level verb. It cannot see logging through a repo-local wrapper named otherwise, or in source it did not read — this is 'no logging found by this walk', not a verdict that nothing here logs. If it is right, production issues will be hard to diagnose.
Type Safety — 2 typed · 39 plain JS — the untyped files are composables.js, composables.mjs, flow/declarations.js, scripts/verifyCommitMsg.js, src/components/link.js, src/components/view.js (+33 more).
R10 · Code Duplication· Duplicated block with local edits (60 matched lines × 2 locations) · ×1
Duplicated block with local edits (60 matched lines × 2 locations) composables.js:108— composables.js:108 · composables.mjs:104 — the two spans are one implementation copied and then locally edited — 420 tokens are still identical, in the same order in both files, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one.
R10 · Code Duplication· Duplicated block with local edits (38 matched lines × 2 locations) · ×1
Duplicated block with local edits (38 matched lines × 2 locations) composables.mjs:45— composables.mjs:45 · src/composables/guards.js:5 — the two spans are one implementation copied and then locally edited — 207 tokens are still identical, in the same order in both files, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one.
R10 · Code Duplication· Duplicated block with local edits (21 matched lines × 2 locations) · ×1
Duplicated block with local edits (21 matched lines × 2 locations) composables.js:22— composables.js:22 · src/composables/globals.js:8 — the two spans are one implementation copied and then locally edited — 113 tokens are still identical, in the same order in both files, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one.
R10 · Code Duplication· Duplicated block with local edits (14 matched lines × 2 locations) · ×1
Duplicated block with local edits (14 matched lines × 2 locations) composables.mjs:18— composables.mjs:18 · src/composables/globals.js:8 — the two spans are one implementation copied and then locally edited — 103 tokens are still identical, in the same order in both files, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one.
Duplicated block (14 lines × 2 locations) src/history/hash.js:17— src/history/hash.js:17 · src/history/html5.js:16 — the 2 copies are spread across 2 files, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported.
Duplicated block (13 lines × 3 locations) composables.js:156— composables.js:156 · composables.mjs:152 · src/composables/useLink.js:21 — the 3 copies are spread across 3 files, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported.
Duplicated block (12 lines × 2 locations) src/history/hash.js:59— src/history/hash.js:59 · src/history/hash.js:72 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
R10 · Code Duplication· Duplicated block with local edits (10 matched lines × 2 locations) · ×1
Duplicated block with local edits (10 matched lines × 2 locations) src/history/abstract.js:17— src/history/abstract.js:17 · src/history/abstract.js:29 — the two spans are one implementation copied and then locally edited — 51 tokens are still identical, in the same order in both spans, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one.
Duplicated block (9 lines × 2 locations) src/router.js:171— src/router.js:171 · src/router.js:182 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (8 lines × 2 locations) src/history/html5.js:58— src/history/html5.js:58 · src/history/html5.js:67 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Complex function render (cyclomatic 34, cognitive 60) src/components/link.js:45— render has cyclomatic complexity 34 and cognitive complexity 60; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes.
Complex function addRouteRecord (cyclomatic 27, cognitive 33) src/create-route-map.js:57— addRouteRecord has cyclomatic complexity 27 and cognitive complexity 33; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes.
Complex function normalizeLocation (cyclomatic 21, cognitive 21) src/util/location.js:10— normalizeLocation has cyclomatic complexity 21 and cognitive complexity 21; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes.
Complex function render (cyclomatic 19, cognitive 24) src/components/view.js:14— render has cyclomatic complexity 19 and cognitive complexity 24; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes.
Complex function install (cyclomatic 16, cognitive 13) src/router.js:21— install has cyclomatic complexity 16 and cognitive complexity 13; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive sits below cyclomatic here, so much of the count is breadth — arms side by side rather than stacked — and splitting per arm would leave a function per arm; group the work between the checks into named steps instead. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes.
Complex function isSameRoute (cyclomatic 14, cognitive 14) src/util/route.js:73— isSameRoute has cyclomatic complexity 14 and cognitive complexity 14; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes.
R2 · Cyclomatic Complexity· Complex function match (cyclomatic 13, cognitive 24) · ×1
Complex function match (cyclomatic 13, cognitive 24) src/create-matcher.js:51— match has cyclomatic complexity 13 and cognitive complexity 24; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes.
Complex function redirect (cyclomatic 13, cognitive 16) src/create-matcher.js:97— redirect has cyclomatic complexity 13 and cognitive complexity 16; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes.
Complex function createRoute (cyclomatic 13, cognitive 12) src/util/route.js:8— createRoute has cyclomatic complexity 13 and cognitive complexity 12; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive sits below cyclomatic here, so much of the count is breadth — arms side by side rather than stacked — and splitting per arm would leave a function per arm; group the work between the checks into named steps instead. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes.
Complex function scrollToPosition (cyclomatic 12, cognitive 17) src/util/scroll.js:139— scrollToPosition has cyclomatic complexity 12 and cognitive complexity 17; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes.
Dead file (~209 LoC) examples/navigation-guards/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~171 LoC) examples/keepalive-view/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~146 LoC) examples/composables/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~123 LoC) examples/redirect/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~119 LoC) examples/active-links/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~115 LoC) examples/basic/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~110 LoC) examples/nested-routes/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~105 LoC) flow/declarations.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~103 LoC) examples/scroll-behavior/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~87 LoC) examples/hash-mode/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~83 LoC) examples/lazy-loading/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~75 LoC) examples/multi-app/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~72 LoC) examples/transitions/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~66 LoC) examples/restart-app/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~58 LoC) examples/route-params/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~52 LoC) examples/nested-router/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~49 LoC) examples/route-matching/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~48 LoC) examples/named-views/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~45 LoC) examples/auth-flow/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~40 LoC) examples/auth-flow/components/App.vue— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), but 1 in-repo import(s) from 1 other file(s) do name it (examples/auth-flow/app.js) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it
Dead file (~39 LoC) examples/router-errors/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~38 LoC) examples/auth-flow/components/Login.vue— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), but 1 in-repo import(s) from 1 other file(s) do name it (examples/auth-flow/app.js) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it
Dead file (~37 LoC) examples/discrete-components/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~34 LoC) examples/named-routes/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~32 LoC) examples/data-fetching/app.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~23 LoC) examples/data-fetching/api.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), but 1 in-repo import(s) from 1 other file(s) do name it (examples/data-fetching/Post.vue) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it
Dead file (~18 LoC) scripts/verifyCommitMsg.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Dead file (~16 LoC) examples/route-props/Hello.vue— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), but 1 in-repo import(s) from 1 other file(s) do name it (examples/route-props/app.js) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it
Dead file (~14 LoC) examples/lazy-loading/Bar.vue— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), but 1 in-repo import(s) from 1 other file(s) do name it (examples/lazy-loading/app.js) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it
Dead file (~12 LoC) src/entries/esm.js— no import path from any entry point (44 application, 7 tooling, 45 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
Unused dependency '@vuepress/plugin-pwa' — Declared in the root package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it.
Unused dependency '@vuepress/theme-vue' — Declared in the root package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it.
Unused dependency 'buble' — Declared in the root package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it.
Unused dependency 'cross-spawn' — Declared in the root package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it.
Unused dependency 'flow-bin' — Declared in the root package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it.
Unused dependency 'rollup-watch' — Declared in the root package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it.
Unused dependency 'vue-server-renderer' — Declared in the root package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it.
Unused dependency 'vue-template-compiler' — Declared in the root package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it.
Unused dependency 'vuepress-theme-vue' — Declared in the root package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it.
Unused dependency 'yorkie' — Declared in the root package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it.
Swallowed exception (empty catch) src/util/route.js:19— An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
Deprecated: @babel/plugin-proposal-async-generator-functions REDACTED:274— @babel/plugin-proposal-async-generator-functions 7.13.15 is resolved in REDACTED and is marked deprecated by its publisher: "This proposal has been merged to the ECMAScript standard and thus this plugin is no longer maintained. Please use @babel/plugin-transform-async-generator-functions instead.". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: @babel/plugin-proposal-class-properties REDACTED:283— @babel/plugin-proposal-class-properties 7.13.0 is resolved in REDACTED and is marked deprecated by its publisher: "This proposal has been merged to the ECMAScript standard and thus this plugin is no longer maintained. Please use @babel/plugin-transform-class-properties instead.". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: @babel/plugin-proposal-class-static-block REDACTED:291— @babel/plugin-proposal-class-static-block 7.13.11 is resolved in REDACTED and is marked deprecated by its publisher: "This proposal has been merged to the ECMAScript standard and thus this plugin is no longer maintained. Please use @babel/plugin-transform-class-static-block instead.". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: @babel/plugin-proposal-dynamic-import REDACTED:308— @babel/plugin-proposal-dynamic-import 7.13.8 is resolved in REDACTED and is marked deprecated by its publisher: "This proposal has been merged to the ECMAScript standard and thus this plugin is no longer maintained. Please use @babel/plugin-transform-dynamic-import instead.". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: @babel/plugin-proposal-export-namespace-from REDACTED:316— @babel/plugin-proposal-export-namespace-from 7.12.13 is resolved in REDACTED and is marked deprecated by its publisher: "This proposal has been merged to the ECMAScript standard and thus this plugin is no longer maintained. Please use @babel/plugin-transform-export-namespace-from instead.". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: @babel/plugin-proposal-json-strings REDACTED:324— @babel/plugin-proposal-json-strings 7.13.8 is resolved in REDACTED and is marked deprecated by its publisher: "This proposal has been merged to the ECMAScript standard and thus this plugin is no longer maintained. Please use @babel/plugin-transform-json-strings instead.". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: @babel/plugin-proposal-logical-assignment-operators REDACTED:332— @babel/plugin-proposal-logical-assignment-operators 7.13.8 is resolved in REDACTED and is marked deprecated by its publisher: "This proposal has been merged to the ECMAScript standard and thus this plugin is no longer maintained. Please use @babel/plugin-transform-logical-assignment-operators instead.". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: @babel/plugin-proposal-nullish-coalescing-operator REDACTED:340— @babel/plugin-proposal-nullish-coalescing-operator 7.13.8 is resolved in REDACTED and is marked deprecated by its publisher: "This proposal has been merged to the ECMAScript standard and thus this plugin is no longer maintained. Please use @babel/plugin-transform-nullish-coalescing-operator instead.". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: @babel/plugin-proposal-numeric-separator REDACTED:348— @babel/plugin-proposal-numeric-separator 7.12.13 is resolved in REDACTED and is marked deprecated by its publisher: "This proposal has been merged to the ECMAScript standard and thus this plugin is no longer maintained. Please use @babel/plugin-transform-numeric-separator instead.". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: @babel/plugin-proposal-object-rest-spread REDACTED:356— @babel/plugin-proposal-object-rest-spread 7.13.8 is resolved in REDACTED and is marked deprecated by its publisher: "This proposal has been merged to the ECMAScript standard and thus this plugin is no longer maintained. Please use @babel/plugin-transform-object-rest-spread instead.". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: @babel/plugin-proposal-optional-catch-binding REDACTED:367— @babel/plugin-proposal-optional-catch-binding 7.13.8 is resolved in REDACTED and is marked deprecated by its publisher: "This proposal has been merged to the ECMAScript standard and thus this plugin is no longer maintained. Please use @babel/plugin-transform-optional-catch-binding instead.". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: @babel/plugin-proposal-optional-chaining REDACTED:375— @babel/plugin-proposal-optional-chaining 7.13.12 is resolved in REDACTED and is marked deprecated by its publisher: "This proposal has been merged to the ECMAScript standard and thus this plugin is no longer maintained. Please use @babel/plugin-transform-optional-chaining instead.". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: @babel/plugin-proposal-private-methods REDACTED:384— @babel/plugin-proposal-private-methods 7.13.0 is resolved in REDACTED and is marked deprecated by its publisher: "This proposal has been merged to the ECMAScript standard and thus this plugin is no longer maintained. Please use @babel/plugin-transform-private-methods instead.". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: @babel/plugin-proposal-private-property-in-object REDACTED:392— @babel/plugin-proposal-private-property-in-object 7.14.0 is resolved in REDACTED and is marked deprecated by its publisher: "This proposal has been merged to the ECMAScript standard and thus this plugin is no longer maintained. Please use @babel/plugin-transform-private-property-in-object instead.". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: @babel/plugin-proposal-unicode-property-regex REDACTED:402— @babel/plugin-proposal-unicode-property-regex 7.12.13 is resolved in REDACTED and is marked deprecated by its publisher: "This proposal has been merged to the ECMAScript standard and thus this plugin is no longer maintained. Please use @babel/plugin-transform-unicode-property-regex instead.". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: @hapi/address REDACTED:910— @hapi/address 2.1.4 is resolved in REDACTED and is marked deprecated by its publisher: "Moved to 'npm install @sideway/address'". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: @hapi/bourne REDACTED:915— @hapi/bourne 1.3.2 is resolved in REDACTED and is marked deprecated by its publisher: "This version has been deprecated and is no longer supported or maintained". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: @hapi/hoek REDACTED:920— @hapi/hoek 8.5.1 is resolved in REDACTED and is marked deprecated by its publisher: "This version has been deprecated and is no longer supported or maintained". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: @hapi/joi REDACTED:925— @hapi/joi 15.1.1 is resolved in REDACTED and is marked deprecated by its publisher: "Switch to 'npm install joi'". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: @hapi/topo REDACTED:935— @hapi/topo 3.1.6 is resolved in REDACTED and is marked deprecated by its publisher: "This version has been deprecated and is no longer supported or maintained". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: acorn-dynamic-import REDACTED:1569— acorn-dynamic-import 4.0.0 is resolved in REDACTED and is marked deprecated by its publisher: "This is probably built in to whatever tool you're using. If you still need it... idk". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: circular-json REDACTED:3337— circular-json 0.3.3 is resolved in REDACTED and is marked deprecated by its publisher: "CircularJSON is in maintenance only, flatted is its successor.". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: consolidate REDACTED:3601— consolidate 0.15.1 is resolved in REDACTED and is marked deprecated by its publisher: "Please upgrade to consolidate v1.0.0+ as it has been modernized with several long-awaited fixes implemented. Maintenance is supported by Forward Email at https://forwardemail.net ; follow/watch https://github.com/ladjs/consolidate for updates and release changelog". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: conventional-changelog-atom REDACTED:3633— conventional-changelog-atom 2.0.8 is resolved in REDACTED and is marked deprecated by its publisher: "This preset is deprecated. Please use conventional-changelog-conventionalcommits or conventional-changelog-angular instead.". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Deprecated: conventional-changelog-codemirror REDACTED:3651— conventional-changelog-codemirror 2.0.8 is resolved in REDACTED and is marked deprecated by its publisher: "This preset is deprecated. Please use conventional-changelog-conventionalcommits or conventional-changelog-angular instead.". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
Orphaned file src/history/base.js:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/router.js:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/components/link.js:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file composables.js:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file composables.mjs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/create-matcher.js:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/create-route-map.js:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/util/scroll.js:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/components/view.js:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/util/route.js:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/history/hash.js:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/composables/useLink.js:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/history/html5.js:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/util/resolve-components.js:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/util/query.js:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file flow/declarations.js:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Duplicated predicate composables.js:227— `activeRecordIndex.value > -1 && activeRecordIndex.value === currentRoute.matched.length - 1 && isSameRouteLocationParams(currentRoute.params…` appears character-identically in 3 files — composables.js, composables.mjs, src/composables/useLink.js. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate composables.js:221— `activeRecordIndex.value > -1 && includesParams(currentRoute.params, resolvedRoute.value.route.params)` appears character-identically in 3 files — composables.js, composables.mjs, src/composables/useLink.js. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate composables.js:122— `e.button !== undefined && e.button !== 0` appears character-identically in 3 files — composables.js, composables.mjs, src/components/link.js. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate composables.js:124— `e.currentTarget && e.currentTarget.getAttribute` appears character-identically in 3 files — composables.js, composables.mjs, src/components/link.js. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate composables.js:118— `e.metaKey || e.altKey || e.ctrlKey || e.shiftKey` appears character-identically in 3 files — composables.js, composables.mjs, src/components/link.js. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate composables.js:211— `length > 1 && parentRecord && parentRecord === routeMatched.parent` appears character-identically in 3 files — composables.js, composables.mjs, src/composables/useLink.js. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate composables.js:98— `target && target.$vnode && target.$vnode.data` appears character-identically in 3 files — composables.js, composables.mjs, src/composables/guards.js. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate composables.js:89— `target && target.$vnode && target.$vnode.data && target.$vnode.data.routerViewDepth == null` appears character-identically in 3 files — composables.js, composables.mjs, src/composables/guards.js. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate composables.js:70— `toMatched.length < depth || toMatched[depth] !== fromMatched[depth]` appears character-identically in 3 files — composables.js, composables.mjs, src/composables/guards.js. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
README/code drift README.md:6— README.md names Vue 3, but the manifest declares `vue` ^2.7.0. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/guide/README.md:4— docs/guide/README.md names Vue 3, but the manifest declares `vue` ^2.7.0. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
redundant comment test/e2e/runner.js:141— "setup and run tests" repeats the code it sits on: 3 of its 3 words (setup, run, tests) are already in `runner`. Delete it, or replace it with what the code cannot say (why it is done here, a constraint, or a consequence).
D34 · Knowledge Freshness· Orphaned files with no living knowledge · ×1
Orphaned files with no living knowledge — 16 of 16 analysed file(s) have no living knowledge left — their last meaningful change has decayed away, so if one breaks, no one currently understands it (counted over production source files of roughly 2,400 bytes or more, excluding vendored, generated, example/demo and scaffolding-template trees and test files identified by path convention, largest first; 16 of the 35 production source files in this repository met that bar). None is large enough to earn a read-through of its own, so this row stands in for the per-file rows rather than raising one each — most significant first: src/history/base.js, src/router.js, src/components/link.js, composables.js, composables.mjs, src/create-matcher.js, src/create-route-map.js, src/util/scroll.js (and 8 more). Attach the read to the next change that touches one of them: have a second person review that change, and leave behind a short comment or test recording what the file is for, so the knowledge comes back at the cost of a change you were making anyway.
No ADRs — No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
M2 · Architecture documentation· No architecture diagram/doc · ×1
No architecture diagram/doc — No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.
No SAST — No static application security testing detected. For this repository's stack, add CodeQL's javascript-typescript pack, `semgrep --config=p/javascript`, or eslint-plugin-security as a CI step. What was searched, so you can tell an absence from a miss: the 2 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner.
No dependency-update automation package.json:84— `package.json` declares packages, and nothing in the repository keeps them current: no Dependabot or Renovate configuration that schedules updates, and no dependency-review gate on pull requests. A pinned dependency stays at the version it was added at until someone notices — including after an advisory is published against it. Add a `.github/dependabot.yml` with one `package-ecosystem` entry per ecosystem the tree uses (or an enabled `renovate.json`), and gate pull requests with `actions/dependency-review-action`.
No release approval gate — The release is automated and no gate that pauses it for a human is DECLARED IN THIS REPOSITORY'S PIPELINE FILES. What was read: every file under `.github/workflows/`, `.forgejo/workflows/`, `.gitea/workflows/`, `.azuredevops/` and `.azure-pipelines/`, plus `.gitlab-ci*` and `azure-pipelines*` — with comment text stripped, so documenting a gate is not declaring one. What would have counted: GitLab's `when: manual`, CircleCI's `type: approval`, an Azure `ManualValidation@` task or an `approvals:` block, a Jenkins `input` step, a `uses:` step naming an approval action, an `environment:` paired with `reviewers` / `required_reviewers` / `protection` / `wait-timer` / `deployment_branch_policy`, a draft-release step, a `workflow_dispatch` promotion, or a release-event gate. ★ What this cannot see, because none of it is a file: a GitHub environment whose required reviewers are configured in repo SETTINGS, a branch protection rule, or an organisation deployment policy — all of them real, enforced gates that live outside the repository. If yours is one of those, this row is wrong and nothing in the tree could have told us. Otherwise: whatever the release trigger points at is published to users unreviewed, so a mistagged or unverified commit ships and the only remedy is a follow-up release.
No security response headers detected netlify.toml:1— None of the 11 security response headers the OWASP Secure Headers Project recommends (Content-Security-Policy, Strict-Transport-Security, X-Content-Type-Options, X-Frame-Options, …) is configured — defense in depth, even when a reverse proxy could set them. This is reported because `netlify.toml` configures this repository's static hosting, including its response headers, so the configuration that would carry these headers is in this repository and was read in full. (−2.0 on this card.)
Dependency hygiene PARTLY measured — npm pinning read, dependency currency not (the committed lockfile resolved no direct production dependency) — This repository's npm dependencies were read for PINNING discipline: 0 production declaration(s) plus 49 development one(s) across 1 package.json (1 of them the product — the rest are example, documentation or fixture manifests, which are read and counted but screened off the rules below, because both prescribe a MOVE and "align your example apps" is not a remedy), against 1 committed lockfile(s). No pinning defect was found. That is only PART of dependency hygiene, so this dimension is NOT SCORED: whether any of these packages has a newer, deprecated or abandoned release is the dependency-CURRENCY question, and answering it needs concrete resolved versions. This repository's committed lockfile WAS read and it resolves no direct production dependency to grade — a package.json states version RANGES, which name no particular release to be behind. That is a fact about this repository, not a reader we are missing. A clean pinning pass is NOT an all-clear for these dependencies, and it is not a finding that they are all USED. Note also what is deliberately NOT charged here: a workspace legitimately carries ONE lockfile for many manifests, so no row is raised off the lockfile count, only reported. Known CVEs in the same dependency graph are a separate question again, reported under D30 wherever the manifest is OSV-readable.
Appendix B — Reproduction & audit trail
Every external tool invocation behind a deep-scan dimension — the tool, its captured version, the exact command, how many findings it yielded, and a link to the retained raw output. To reproduce any finding: check out the same commit and run the command shown (repo-relative — never an absolute scratch path). The complete raw scanner output is retained verbatim under artifacts/raw/ (indexed in artifacts/raw/index.json); per-invocation exit codes and wall-clock durations are in sidecar.json — kept out of this table so the rendered report stays byte-identical across runs of the same commit.
trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.
semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that. semgrep could not parse 1 file(s) — `src/history/base.js` — so the PII/GDPR sweep did not cover the unparsed regions of them; rows reported elsewhere in those files are real.
disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
Run 01a1dd66-bb44-72a0-9e29-4e39be99f25c · every finding is also locatable in findings.md, and the complete scoring record (with exit codes + durations) in sidecar.json.
Issues: 84 · Warnings: 174 · Recommendations: 127 · Info: 1 — Appendix A · all findings · full markdown report.
Generated by the Canine Code Analyzer: deterministic code-health analysis. 15-11-2026 @ 04:10 UTC.
Downloadable artifacts
Machine-readable and reproducible from this commit + frozen rubric — drop them straight into a contract appendix, a CRA dossier, or a downstream SCA / VEX tool.