Executive summary
thoughtbot/suspenders falls short of our standard for production because we found no logging, tracing or health checks in the code and no automated security scanning of the code, its secrets or its dependencies. It scores 55 out of 100 and is rated Adequate, and all ten of its critical findings are security problems.
Production Readiness, at 43, is the weakest lens and counts most in the score. The best first steps are logging through a logging library and adding automated security scanning, each worth about 8 points. Raising Production Readiness to 70 would lift the score to about 66.
Seven pipeline tools are referenced by a changeable name, so the build pipeline can be tampered with. One known security hole in a package the code depends on can be used by attackers, and one pipeline step installs packages that can change without warning. Pinning each tool to an exact version, updating the vulnerable packages and pinning what the pipeline installs would close these risks. Switching the validation back on would fix the security check on connections or logins switched off.
The product code is 647 lines, too few for a meaningful rebuild estimate.
If Production Readiness rose from 43 to 70, the lowest score rated Strong, the score would rise from 55 to about 66.
Top priorities
Diagnosis: what the measurements show together
At a glance — Code Health
At a glance — Architecture
At a glance — Maturity
At a glance — Readiness
At a glance — Security
Security & Compliance — OWASP Top-10 mapping
| OWASP category | Findings | Severity |
|---|---|---|
| A05:2025 — Injection | 9 | High / Critical |
| A03:2025 — Software Supply Chain Failures | 1 | High / Critical |
Roadmap
Top priorities: Log through `Rails.logger` (or SemanticLogger/Lograge for structured output) at meaningful points in the services you run; Add a SAST step to CI running what this repository's stack ships: brakeman for Rails apps, otherwise `semgrep --config=auto` or CodeQL's ruby pack — so a security regression fails the build instead of landing; Resolve the 1 No ADRs found finding(s) in ADR Quality — start with Procfile.
| Do this | Helps | Effort | Dimension |
|---|---|---|---|
| Log through `Rails.logger` (or SemanticLogger/Lograge for structured output) at meaningful points in the services you run. | +8.0 pts | Medium | Observability |
| Add a SAST step to CI running what this repository's stack ships: brakeman for Rails apps, otherwise `semgrep --config=auto` or CodeQL's ruby pack — so a security regression fails the build instead of landing. | +8.0 pts | Medium | Security & performance tooling |
| Resolve the 1 No ADRs found finding(s) in ADR Quality — start with Procfile. | +3.4 pts | Low | ADR Quality |
| Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release. | +3.2 pts | Medium | Release Hygiene |
| Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them. | +3.1 pts | Medium | Architecture documentation |
| Adopt a checker and raise it file by file: with Sorbet, `srb init` (or `bundle exec tapioca init`) commits `sorbet/config`, then move each file's sigil from `# typed: false` to `# typed: true` and on to `strict` as its methods get `sig`s — `spoom bump` does the moving; with Steep, write RBS signatures and `check` the product directories in the `Steepfile` under `D::Ruby.default` or `strict`, not `lenient`. Then pay down the assertions rather than adding to them: each `T.must` is a nil the checker could not rule out — narrow it (`return unless x`, `x&.`, `if (y = x)`), make the attribute non-nilable and set it in `initialize`, or change the method so the nil cannot arrive. | +1.4 pts | Medium | Nullable reference types |
| Nothing pauses a release for a human: publish as a draft release (or gate the release job on a protected tag/manual dispatch) so a bad build can be stopped before users can download it. | +1.1 pts | Medium | Deployment & Rollback |
| Stop accepting every TLS certificate: delete `verify_mode = OpenSSL::SSL::VERIFY_NONE` / `verify: false` / `verify_ssl: false` so the chain, hostname and expiry are verified, and trust a self-signed or private server by giving the client its CA (`ca_file`, `cert_store`) — never by switching verification off. | +1.0 pts | Medium | Web-Security Posture |
File quality
| File | Score | Band | Worst signal |
|---|---|---|---|
| REDACTED | 2.5 | Slop | Static Analysis (SAST): High: REDACTED |
| lib/templates/web.rb | 6.9 | Mixed | Explicit Debt: TodoComment |
| REDACTED | 7.2 | Mixed | Static Analysis (SAST): High: REDACTED |
| REDACTED | 7.2 | Mixed | Static Analysis (SAST): High: REDACTED |
| REDACTED | 7.2 | Mixed | Static Analysis (SAST): High: REDACTED |
| REDACTED | 7.2 | Mixed | Dependency Vulnerabilities: High CVE: REDACTED |
| REDACTED | 7.9 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| lib/templates/Procfile | 9.5 | Near-clean | ADR Quality: No ADRs found |
How the grades work
A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.
Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.
Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.
Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.
Methodology & how to trust this report
This survey is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. All 35 evaluated dimensions are computed by tools and static analysis; no language model sets or judges any of them. Overall confidence is 0.8, the weighted average across measured dimensions.
What we checked — 35 dimensions across the health lenses
- Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 17 of 27 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line.
- Is there a tool behind the number? Every score below names the method that produced it: Roslyn, git or a scanner, not a narrative.
- Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.
Tools & methods
| Method | Backs | Version | Evaluator |
|---|---|---|---|
| Roslyn static analysis | Complexity, cohesion, coupling, dead code, API surface, layering | 5.3.0 | ✓ deterministic |
| Native secret scanner | Hardcoded secrets / credentials | 1.0.0 | ✓ deterministic |
| Canine Code Analyzer duplication detector (in-process) | Code duplication | 1.0.0 | ✓ deterministic |
| Coverage (coverlet / dotnet-coverage) | Line & branch coverage | 10.0.400 | ✓ deterministic |
| NuGet / dotnet | Outdated, vulnerable & deprecated dependencies | 10.0.400 | ✓ deterministic |
| git / LibGit2Sharp | Churn hotspots, knowledge concentration, history | 2.43.0 · 0.31.0 | ✓ deterministic |
| gitleaks · semgrep · trivy | Secrets in history, SAST, CVEs, IaC & container, PII / GDPR | 1.86.0 · 0.69.3 | ✓ deterministic |
Run transparency — what happened this run
- D1 Cyclomatic Complexity — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Most of this repository's production source (.rb) had no cyclomatic complexity computed for it: no method bodies were exposed for those file kinds by any language model this pass could load.
- D2 Cognitive Complexity — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Most of this repository's production source (.rb) had no cognitive complexity computed for it: no method bodies were exposed for those file kinds by any language model this pass could load.
- D8 Code Coverage — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Coverage NOT MEASURED: test source is present (.rb) but the built-in coverage collector has no runner for this repository's ecosystem — so this suite was never executed by it. Not scored — this is a gap in the analyzer's language coverage, not a defect in the repo.
- D15 Churn × Complexity Hotspots — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. A hotspot is churn × complexity. Churn was measured (114 line(s) across the 90-day window), but no complexity could be computed for .rb, which is most of this repository's production code — so every churned file would score as complexity 0 and the hotspot list would be empty no matter how tangled the code is. Not scored — this is a gap in the analysis run, not a finding about this repository.
- D22 Internal API Consistency — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D22's deterministic call-shape rules are gated on C# first (docs/plans/deterministic-engine.md, P5): each other language is switched on only after its own concept suite and A/B gate pass. This says nothing about whether that surface is consistent.
- D24 Comment Value — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check's reader does not cover the language this repository's product is written in, so it had nothing of the product to read. That is a gap in this analyzer's language reach — not a finding about this repository.
- AXB1 Runtime evidence locked — no reproducible boot — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Subject: 2 markup document(s) — HTML, Razor, JSX, Vue, Svelte or server templates. The Runtime Evidence tier boots an app only via docker-compose, an Aspire AppHost, a Dockerfile, an npm dev script, a web service's own toolchain entry point (cargo, go, dotnet, Python, Spring Boot), or an Android app's own Gradle wrapper (run on an emulator); an Apple or Flutter app needs a host it lacks. None applied, so no live runtime a11y/egress/header evidence was collected. You can widen what we reach: add a docker-compose.yml (or an Aspire AppHost) that brings the app up with its dependencies. We then boot it in an isolated sandbox and gathers real runtime evidence — you change nothing in your pipeline (no CI step, no SDK).
- M4 Documentation accuracy — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. M4 checks only the claim kinds adjudicated at or above 95 % precision: links and versions (PREREGISTRATION version 9), and artefact counts an order of magnitude off. Paths, command arguments, installs, environment variables, settings, projects, packages, routes, cd targets, infrastructure products and removed modules are read but not checked, and none of them is reported or counted.
- P5 DR & Backup — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. No backup/snapshot/replication config, RTO/RPO or restore-procedure documentation was found — and no production persistence was detected either (no data-access packages, no data-store services, no database resources), so there is nothing in this repository whose loss a DR control would recover. If this system's data lives in a platform or ops repo we can't see, that's where the DR evidence belongs.
Limitations & what we did not check
We assess the repository exactly as committed, and only the repository. By design we do not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.
Per-dimension blind spots
- D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
- D6 Cohesion (LCOM4): LCOM4 cohesion is syntactic — it infers connectivity from which methods touch which fields/methods by name, not from real runtime behaviour or intent.
- D11 Test Reliability: Flakiness is inferred from history/markers — we run the suite once (for coverage), not the repeated runs under varied conditions that reveal nondeterminism, so a flaky test never recorded as failing is invisible here.
- D12 Dependency Hygiene: Dependency health reads manifests and lockfiles — a vulnerability in a vendored/copied dependency, or risk from how a dependency is actually used, is outside this view.
- D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
- D14 License Compliance: License compatibility is checked against declared package metadata and a policy — mislabelled or missing license metadata, and obligations that depend on how you distribute, are not resolved here.
- D16 Bus Factor: Bus-factor is a time-decayed model of commit attribution (who has recently, repeatedly worked a file), not comprehension — pairing, review and reading-without-committing spread knowledge it can't see; bot commits and shared accounts still distort it.
- D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
- D20 ADR Quality: ADR quality checks the structure of the decision records present: it cannot know about decisions made and never recorded, and it does not judge how well a record argues its case. Records in a language the section lexicon does not cover are not evaluated.
- D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
- D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
- D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
- D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
- D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
- D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
- D44 Platform End-of-Life: The support table is FROZEN, so it goes out of date by losing RECALL: a release that ended support after the table was written is missed until the table is refreshed, and this dimension reading 10 is not evidence that a platform is current. Only platforms the repository DECLARES in a place this pass reads are seen — a runtime named only in a Dockerfile (D31's subject), in a CI workflow (D29's), or in a file this pass does not parse (go.mod, a Gemfile ruby directive) is invisible here, which is why a repository declaring none of them abstains rather than scoring. Only frameworks with a PUBLISHED support policy are tracked: React, Flask and Express publish none, so their age cannot be judged and their absence from a report is not a statement that they are supported.
- AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
- M4 Documentation accuracy: Documentation accuracy checks links, versions and artefact counts against the tree: other claims (paths, commands, settings, routes) are read but not checked, and it cannot run the onboarding or measure how long a real new joiner takes.
- P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".
- P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.
Dimensions
D4 · Code Duplication
0 duplicated block group(s) detected. 0.0 % of the production lines (0 of 647) are in a reported copy.
D6 · Cohesion (LCOM4)
0 of 1 classes have LCOM4 above 3.
D11 · Test Reliability
0 flaky across 1 measured tier(s). Ruby (RSpec: repository root, 3 spec files): measured (0 flaky).
D12 · Dependency Hygiene
3 outdated direct gem(s), 0 pinning defect(s). 4 declaration(s) graded against rubygems.org, 4 of them against a version resolved in a committed REDACTED. Whether any of these gems is DEPRECATED or YANKED is not graded — rubygems.org publishes no deprecation marker, and a yank removes a version rather than flagging it. Whether any is UNMAINTAINED is not graded either: no registry publishes a maintenance status, and release age does not stand in for one. Whether any is UNUSED is a source question, not a registry one. Known CVEs in this dependency graph are D30's question, read from the manifest there.
D13 · Secret Scanning
Secret scan ran and found no leaked secrets.
D14 · License Compliance
0 of 37 shipped gem(s) use a banned license. Licences were resolved from rubygems.org over the 37 gem(s) a consumer installs — this repository's runtime declarations closed transitively over its committed REDACTED. Development-group and `add_development_dependency` gems are excluded: they are not distributed with this repository. 1 of them publish no licence on rubygems.org; that is missing data, not a violation, and none of them is charged. This repository publishes itself under MIT, which is its own choice and is not judged here.
D16 · Bus Factor
No source file's living knowledge is concentrated in a single author. Counted over 1 of the 7 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.
D17 · Explicit Debt
3 deducted task-comment markers across 647 LoC (0.1/KLoC) → score 9.8. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.
What to do
- Resolve the 3 TodoComment finding(s) in Explicit Debt — start with web.rb (3). — One of this dimension's main actionable groups (3 warning-level).
D20 · ADR Quality
No architecture decision records were found.
What to do
- Resolve the 1 No ADRs found finding(s) in ADR Quality — start with Procfile. — One of this dimension's main actionable groups (1 recommendation-level).
D28 · Secrets (history)
gitleaks scanned the full history AND the current working tree and found no secrets.
D29 · Static Analysis (SAST)
9 finding(s): 0 critical, 8 high, 1 medium, 0 low. 7 unpinned-GitHub-Actions row(s) are reported here but scored by D36 (supply-chain provenance), which measures that posture as `pinned_actions` — one pinning decision is charged once, not once per lens.
What to do
- Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
- No action in Static Analysis (SAST) — all 5 REDACTED finding(s) are reported here at file:line but scored by D36 (supply-chain provenance), so none is charged to this dimension. — One of this dimension's main actionable groups (5 issue-level, 0 of them charged here).
- No action in Static Analysis (SAST) — all 2 REDACTED finding(s) are reported here at file:line but scored by D36 (supply-chain provenance), so none is charged to this dimension. — One of this dimension's main actionable groups (2 issue-level, 0 of them charged here).
D30 · Dependency Vulnerabilities
1 finding(s): 0 critical, 1 high, 0 medium, 0 low.
What to do
- Resolve the 1 High CVE finding(s) in Dependency Vulnerabilities — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
D34 · Knowledge Freshness
Every significant source file has living knowledge — recently and meaningfully worked. Counted over 1 of the 7 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.
D35 · Change Coupling
No strong hidden change-coupling between production files.
D37 · Vulnerability-disclosure Policy
A vulnerability-disclosure policy (SECURITY.md) is published with a reporting contact.
D43 · Malicious Dependencies
No dependency in any ecosystem this repository declares is published as malicious.
D44 · Platform End-of-Life
0 end-of-life runtime(s) and 0 end-of-life framework(s), read from 1 platform declaration(s) and 4 dependency declaration(s). This dimension reads what the repository says about ITSELF — a pinned target framework, a version file, a capped requires-python, a Rust toolchain pin, a framework major a constraint cannot move off. A FLOOR is deliberately never charged: `requires-python = ">=3.8"` states what the package SUPPORTS, not what it runs on, and a well-maintained library declares exactly that while running its own CI on a current release. The end-of-life facts are FROZEN and dated, so this dimension needs no network and answers identically inside a closed scan fence; as the table ages it loses recall and never precision, because a statement about support that ended in the past cannot become false. The OS layer of a container image is D31's question and the toolchain a CI workflow installs is D29's; this row is neither.
Frontend & cross-cutting dimensions
AX10 · Code composition
AX3 · Project dependency cycles
AX4 · Dependency direction
GD1 · Unfinished & placeholder code
IC1 · Incompleteness & stubs
M1 · Documentation (README)
M2 · Architecture documentation
- No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
- No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.
What to do
- Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
- Add a C4 context/container diagram (Structurizr, PlantUML or Mermaid) or an architecture.md overview.
M3 · Folder & project structure
M4 · Documentation accuracy
P1 · CI/CD gates
P10 · Library API & versioning
P2 · Observability
- No logging call was found in the 7 Ruby production file(s) this check read across 1 module(s). Each was searched for its ecosystem's logging libraries (Ruby: Rails.logger, Logger.new, SemanticLogger, Lograge) and for a call on a receiver named `log`/`logger` (or ending in `Logger`/`_logger`) with a level verb. It cannot see logging through a repo-local wrapper named otherwise, or in source it did not read — this is 'no logging found by this walk', not a verdict that nothing here logs. If it is right, production issues will be hard to diagnose.
What to do
- Log through `Rails.logger` (or SemanticLogger/Lograge for structured output) at meaningful points in the services you run.
- Add a health-check endpoint (Rails' /up (rails/health#show) or a /health route) so orchestrators and load balancers can probe liveness/readiness.
P3 · Security & performance tooling
- No static application security testing detected. For this repository's stack, add brakeman for Rails apps, otherwise `semgrep --config=auto` or CodeQL's ruby pack as a CI step. What was searched, so you can tell an absence from a miss: the 4 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner. — REDACTED:8
What to do
- Add a SAST step to CI running what this repository's stack ships: brakeman for Rails apps, otherwise `semgrep --config=auto` or CodeQL's ruby pack — so a security regression fails the build instead of landing.
- Enable Dependabot/Renovate or a dependency-review gate.
- Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
P4 · Deployment & Rollback
- The release is automated and no gate that pauses it for a human is DECLARED IN THIS REPOSITORY'S PIPELINE FILES. What was read: every file under `.github/workflows/`, `.forgejo/workflows/`, `.gitea/workflows/`, `.azuredevops/` and `.azure-pipelines/`, plus `.gitlab-ci*` and `azure-pipelines*` — with comment text stripped, so documenting a gate is not declaring one. What would have counted: GitLab's `when: manual`, CircleCI's `type: approval`, an Azure `ManualValidation@` task or an `approvals:` block, a Jenkins `input` step, a `uses:` step naming an approval action, an `environment:` paired with `reviewers` / `required_reviewers` / `protection` / `wait-timer` / `deployment_branch_policy`, a draft-release step, a `workflow_dispatch` promotion, or a release-event gate. ★ What this cannot see, because none of it is a file: a GitHub environment whose required reviewers are configured in repo SETTINGS, a branch protection rule, or an organisation deployment policy — all of them real, enforced gates that live outside the repository. If yours is one of those, this row is wrong and nothing in the tree could have told us. Otherwise: whatever the release trigger points at is published to users unreviewed, so a mistagged or unverified commit ships and the only remedy is a follow-up release.
What to do
- Nothing pauses a release for a human: publish as a draft release (or gate the release job on a protected tag/manual dispatch) so a bad build can be stopped before users can download it.
P6 · Release Hygiene
- No CHANGELOG/HISTORY/RELEASES file — what shipped when isn't easy to reconstruct for support or audit. (Versioning/tagging makes releases traceable, but a changelog records the what.)
What to do
- Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release.
S1 · Web-Security Posture
- `OpenSSL::SSL::VERIFY_NONE` as the verify mode is set on a TLS client, so every peer certificate is accepted — including one an attacker presents. Chain, expiry, revocation and hostname are all skipped, so an attacker on the network path can present any certificate and read or rewrite the traffic — the connection is encrypted to the attacker, not to the intended host. Remove the override so OpenSSL verifies the peer — `OpenSSL::SSL::VERIFY_PEER` is what Net::HTTP, Faraday, HTTParty and rest-client use when nothing is set. If the server presents a self-signed or privately-issued certificate, trust THAT issuer rather than every certificate: give the client its CA (`http.ca_file = …` or `cert_store` on Net::HTTP, `ssl: { ca_file: … }` on Faraday, `ssl_ca_file:` on rest-client, or `SSL_CERT_FILE`), which keeps the chain and hostname checks on. — REDACTED:5
What to do
- Stop accepting every TLS certificate: delete `verify_mode = OpenSSL::SSL::VERIFY_NONE` / `verify: false` / `verify_ssl: false` so the chain, hostname and expiry are verified, and trust a self-signed or private server by giving the client its CA (`ca_file`, `cert_store`) — never by switching verification off.
X12 · Unreachable branch
X5 · Nullable reference types
- This repository commits no Sorbet configuration (`sorbet/config`) and no `Steepfile`, so nothing type-checks its 7 Ruby product file(s): a nilable value reaches a method call silently and raises `NoMethodError: undefined method … for nil` the first time it is nil. A `# typed:` sigil does nothing without a `sorbet/config` beside the code; a Steep run configured only on a command line is not something this check can read.
What to do
- Adopt a checker and raise it file by file: with Sorbet, `srb init` (or `bundle exec tapioca init`) commits `sorbet/config`, then move each file's sigil from `# typed: false` to `# typed: true` and on to `strict` as its methods get `sig`s — `spoom bump` does the moving; with Steep, write RBS signatures and `check` the product directories in the `Steepfile` under `D::Ruby.default` or `strict`, not `lenient`. Then pay down the assertions rather than adding to them: each `T.must` is a nil the checker could not rule out — narrow it (`return unless x`, `x&.`, `if (y = x)`), make the attribute non-nilable and set it in `initialize`, or change the method so the nil cannot arrive.
Reference — by lens
| Lens | Score | Rating | Impact |
|---|---|---|---|
| Code Health | 70% | Adequate — gated by X5 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Architecture | 69% | Adequate | Acceptable, with room to improve. |
| Maturity | 62% | Adequate — gated by M2 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Readiness | 43% | Weak — gated by P2, P3 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Security | 75% | Strong | Strongest area. |
Unscored — 1 check(s) recorded observations but carry no score
- D36 Supply-chain Provenance & Signing — 1 observation(s) recorded · The CI pipeline publishes no artifact — no package publish, container push or release with files to download. Supply-chain provenance, signing and an SBOM describe a PUBLISHED artifact for the people who obtain it, so there is nothing to attest here; a deployment of the service itself publishes nothing for anyone else to verify. Add them to the release pipeline when this repo starts publishing artifacts (a package, a container image, or a release with downloadable files). Build integrity and workflow-token hygiene are reported below: they describe what the CI runs and the token it runs with, neither of which is affected by whether the pipeline ships an artifact.
Not evidenced — 1 control(s) we could not find positive evidence for
- P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
Not included — 80 check(s) not relevant to this codebase
- AC1 Text alternatives — Frontend below the scale floor (5 DOM element(s) < 25) — too little surface to assess accessibility.
- AC2 Forms & labels — Frontend below the scale floor (5 DOM element(s) < 25) — too little surface to assess accessibility.
- AC3 Page structure — Frontend below the scale floor (5 DOM element(s) < 25) — too little surface to assess accessibility.
- AC4 Keyboard semantics — Frontend below the scale floor (5 DOM element(s) < 25) — too little surface to assess accessibility.
- AC5 ARIA correctness — Frontend below the scale floor (5 DOM element(s) < 25) — too little surface to assess accessibility.
- AC6 Visual & motion safety — Frontend below the scale floor (5 DOM element(s) < 25) — too little surface to assess accessibility.
- AX1 Captive dependencies — Not applicable: this repository's Ruby imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's.
- AX2 Stateful singletons — No container singleton was found, so there is no shared instance for concurrent requests to race on. No class in this Ruby code is a Rails controller, a Sinatra, Grape or Roda app, a Hanami action or a Rack app (an instance `call(env)`), so no request handler shares state between request threads.
- AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX6 Interface segregation — no class or module declares an abstract method
- AX7 Slice cohesion — not applicable — not a vertical-slice architecture
- AX8 Test isolation — no test/production split to check
- AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
- AXB1 Runtime evidence locked — no reproducible boot — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- C1 Data Protection — No personal data detected in a persisted data model — no PII-named field (email, first_name, date_of_birth, phone, …) or stored credential in an ActiveRecord or Sequel migration, a db/schema.rb table or a Mongoid document — and no database or data-store client (an ActiveRecord model, Sequel, pg, mysql2, sqlite3, Mongo, …) in the source either, so this repository keeps no data at rest for these controls to protect.
- C2 Access Controls — No access-control surface detected in the analyzed source — this repository draws no route and defines no request handler (no Rails routes.draw or controller, no Sinatra, Roda or Grape application, no Hanami action). Access control is therefore N/A here — a gem is authorized by the application that mounts it, not by itself. If this codebase grows request handlers, the dimension reactivates and a default-deny posture is expected then.
- C3 Audit Trail — No personal data detected in a persisted data model — no PII-named column (email, first_name, date_of_birth, phone_number, …) or stored credential in an ActiveRecord or Sequel migration, db/schema.rb or a Mongoid document — and no database client (an ActiveRecord model, Sequel, pg, mysql2, Mongo) in the source either, so this repository keeps no sensitive data whose changes an audit trail would record. If it does (through a hosted backend configured outside this repository, for instance), the trail belongs to wherever that data is stored.
- C4 Data Retention — No personal data detected in a persisted data model — no PII-named field (email, first_name, date_of_birth, phone, …) or stored credential in an ActiveRecord or Sequel migration, db/schema.rb or a Mongoid document — and no database client (ActiveRecord, Sequel, pg, mysql2, mongo, …) in the source either, so this repository keeps no personal data whose lifetime a retention limit would bound.
- C5 Data-Subject Rights — No personal data detected in a persisted data model — no PII-named field (email, first_name, date_of_birth, phone, …) or stored credential in an ActiveRecord or Sequel migration, a db/schema.rb table or a Mongoid document — and no database or data-store client (an ActiveRecord model, Sequel, pg, mysql2, sqlite3, Mongo, …) in the source either, so this repository keeps no personal data for a data subject to erase, export or consent over.
- D1 Cyclomatic Complexity — cyclomatic complexity not measured — .rb exposed no member bodies
- D10 Test Quality — ~164 lines of test source are present (.rb) but no test cases reached the test census for this repository — no test root we could resolve declared them, or the files we read declare no cases in a test framework we recognise — so skipped/assertion-free tests couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
- D15 Churn × Complexity Hotspots — complexity unreadable for .rb — churn × complexity hotspots could not be measured
- D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
- D19 Documentation Quality — No runnable or published unit to look for an example in, and no multi-project root README to look for a map in; the other documentation kinds are withheld (see the gaps), so documentation quality is not applicable here.
- D2 Cognitive Complexity — cognitive complexity not measured — .rb exposed no member bodies
- D21 Naming Consistency — N/A — too few peers to establish a naming convention (27 declarations, no unit with a dominant convention).
- D22 Internal API Consistency — API consistency is measured on C# only; the exposed Ruby surface was not measured.
- D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ sibling projects each declaring an entity of their own or taking another project's integration events. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
- D24 Comment Value — D24 reads C#, Visual Basic, TypeScript and JavaScript comments only — this repository's production source is .rb, which was left unread. Not scored: this is a gap in the analyzer, not a verdict about this repository.
- D25 ADR Conformance — no ADRs to check
- D26 Project Cohesion — This repository is one build unit, `(repository root)` (647 LoC, 9 module-visible types across 3 directories), within the size bounds. Not scored: a single unit of this size gives project cohesion nothing to grade.
- D27 Navigability — symbol resolution incomplete — navigability not assessed
- D3 God Classes — Most of this repository's production source (.rb) was not read by god-class detection, so class size was not assessed for the languages that are the product — whatever else this pass did read is not this repository's class size. Not scored — this is a gap in the analyzer, not a verdict about this repository.
- D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.
- D32 Data Compliance (PII/GDPR) — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.
- D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
- D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
- D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
- D5 Coupling — Not applicable — this RubyGems build ships 1 production module(s), so there is no coupling BETWEEN modules to measure. (Its test and non-production modules are not part of the shipped graph.)
- D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
- D8 Code Coverage — Coverage not included — suite not readable by the collector
- DM1 Domain Modelling — not scored — this repository shows only 1 of the 3 signals this lens looks for (2 value object(s))
- ED1 Event-Driven — not scored — this repository shows none of the 3 signals this lens looks for
- ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
- ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
- P12 CI test-gate honesty — Reported, not scored — and nothing was matched here. The coverage check applies to any stack, and the automatic-re-run check to any GitHub-Actions workflow, but the checks for excluded tests, skipped tests and sleep-based synchronisation currently recognise only some ecosystems' test-runner idioms, so on a repository built with another stack the zeros below mean 'not checked', not 'clean'.
- P7 Outbound HTTP resilience — not applicable — no HTTP server, API framework or worker entry point was found in the Ruby source, so there is no service whose uptime a failing dependency could take down
- P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
- P9 Domain vs controller coverage — coverage not measured: this check compares the coverage of the analyzer's own test run across the domain and web layers, and that run measured none here — Test coverage (D8) says why
- PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for `x.report(…)` entries in a `Benchmark.ips`/`bm`/`bmbm`/`benchmark`/`memory` block, `benchmark:` entries in a benchmark-driver YAML under a bench* directory, rspec-benchmark `perform_*` expectations where the gem is installed, or benchmark-ips, benchmark-memory, rspec-benchmark or benchmark-driver in a Gemfile or gemspec, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
- PF2 Allocation hygiene — Not scored: this check counted allocation-aware idioms (Span, pools, stackalloc) per line, which describes what kind of code a repository is rather than whether it has an allocation problem, so it was withdrawn. Nothing here is a finding about your code.
- PF3 Async & latency hygiene — Not applicable: Ruby has no async/await function colour, so there is no asynchronous code for a blocking call to stall.
- X1 Async correctness — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X10 Duplicated predicate — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X13 Undrained process stream — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X14 Bypassable address classification — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X15 Unvalidated length from an untrusted reader — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X16 Unfloored truncation loop — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X17 Uncapped recursion over a caller-supplied document — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X18 Disposal-pattern correctness — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X19 Unrestored process-global state — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X2 Cancellation propagation — no C# was loaded; this repository's Ruby was read, and no request in it can be cancelled by a caller — a Ruby request takes no token: Net::HTTP, Faraday and async-http are stopped from outside the call (Async::Task#stop, Thread#raise, Timeout), not through a parameter
- X20 Mistyped argument guard — This check asks whether an argument guard reports an EMPTY value as a NULL one, which needs a language that throws a null-specific argument exception — .NET's ArgumentNullException, the JVM's NullPointerException, Dart's ArgumentError.notNull. This repository contains none of those languages: the ones it is written in have a single exception for a bad argument, so there is no pair of exceptions to confuse and nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
- X21 Side-effecting pattern guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X22 Contradicted release guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X23 Unguarded diagnostic materialisation — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X24 Document value interpolated into markup unescaped — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X25 Inert configuration knob — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X26 Unsynchronised callback handoff — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X27 Collection changed while being enumerated — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X28 Index access outside its own emptiness guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X29 Per-element action decided by a fixed element — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X3 Exception handling — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X30 Support guard that admits what it rejects — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
- X4 Structured logging — This check asks whether log calls keep a message's values apart from its text, which needs a logger that can carry them as fields. This repository's Ruby was read, and it logs through none: the standard library's Logger, which Rails.logger is, takes one finished message and no template arguments or fields (as log4net does in C#), so an interpolated message there loses nothing the API could have kept. The console gem (`Console.info`), SemanticLogger, Ougai and dry-logger would be judged.
- X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X7 Silent fallback defaults — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Appendix A — Findings (grouped)
Critical — 10 finding(s)
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- TLS certificate validation disabled REDACTED:5
Serious — 6 finding(s)
- TodoComment lib/templates/web.rb:19
- TodoComment lib/templates/web.rb:25
- TodoComment lib/templates/web.rb:194
- REDACTED
- REDACTED
- No structured logging
Minor — 8 finding(s)
- No ADRs found lib/templates/Procfile:1
- REDACTED
- No ADRs
- No architecture diagram/doc
- No SAST REDACTED:8
- No release approval gate
- No changelog
- Ruby's type checker does not check nil everywhere
Minor — 3 finding(s)
- Outdated: irb
- Outdated: rake
- Outdated: standard
Appendix B — Reproduction & audit trail
| Dimension | Tool | Version | Command | Findings | Raw output |
|---|---|---|---|---|---|
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-61b96b66bfc74bb688091f0e7722fb3c/history.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-61b96b66bfc74bb688091f0e7722fb3c/tree.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-tree.json |
| D29 · Static Analysis (SAST) | semgrep | — | semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/canine-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off --exclude *.arrow --exclude *.avro --exclude *.csv --exclude *.dat --exclude *.db --exclude *.feather --exclude *.geojson --exclude *.h5 --exclude *.hdf5 --exclude *.jsonl --exclude *.log --exclude *.ndjson --exclude *.npy --exclude *.npz --exclude *.orc --exclude *.parquet --exclude *.pickle --exclude *.pkl --exclude *.psv --exclude *.sqlite --exclude *.sqlite3 --exclude *.tfrecord --exclude *.tsv --exclude *.txt . | 9 | artifacts/raw/semgrep.json |
| D30 · Dependency Vulnerabilities | osv-scanner | — | osv-scanner --format json --recursive --experimental-disable-plugins transitivedependency/requirements --experimental-disable-plugins dotnet/csproj --experimental-disable-plugins dotnet/nugetcpm . | 1 | artifacts/raw/osv-scanner.json |
| D31 · IaC & Container Security | trivy | — | trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan. | 0 | — |
| D32 · Data Compliance (PII/GDPR) | semgrep | — | semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that. | 0 | — |
| D40 · Network Egress Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here. | 0 | — |
| D41 · Kernel & Syscall Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here. | 0 | — |
| D42 · Runtime Threat Enforcement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here. | 0 | — |
| D43 · Malicious Dependencies | osv-scanner | — | osv-scanner --format json --recursive --experimental-disable-plugins transitivedependency/requirements --experimental-disable-plugins dotnet/csproj --experimental-disable-plugins dotnet/nugetcpm . | 0 | artifacts/raw/osv-scanner.json |