Executive summary
theiterators/kebs falls short of our standard for production, in part because we found no logging, tracing or health checks in the code. It scores 57 out of 100 and is rated Adequate, and all 26 of its critical findings are security problems in the build pipeline.
Production Readiness, at 46, is the weakest lens and counts most in the score. The best first step is adopting a logging library, worth about 8 points. Adding automated security scanning comes next, worth about 7 points. Raising Production Readiness to 70 would lift the score to about 66.
Twenty-four pipeline tools are referenced by a changeable name, so the build pipeline can be tampered with. One secret can leak from the build pipeline. Pinning each tool to an exact version and limiting the secret to its own step would close both risks. Correcting the flagged pipeline settings would fix the weakness in the build pipeline's configuration.
The product code is 4,480 lines, about €12,000 to rebuild. The check for the health of its packages couldn't finish, so that result is missing, not a clean pass.
If Production Readiness rose from 46 to 70, the lowest score rated Strong, the score would rise from 57 to about 66.
Rebuild cost: about €12,000 · Estimate
| Cost to rebuild | €3,900 to €20,000, for 65 to 206 hours of work, under 0.1 person-years for one engineer |
|---|---|
| Difficulty of the problem | Standard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write. |
| Quality factor | ×0.8 at a score of 57. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it. |
| Size | Small: 4,480 lines of product code |
| What it is not | Not a quotation: nobody has offered to build it for that. Not a valuation: it says nothing about what the business is worth. Not a certified figure: no professional has signed it as one. |
Top priorities
Diagnosis: what the measurements show together
Architecture — module dependency graph
Architecture: which parts of the code depend on which
| uses → | 1 core.enums | 2 core.instances | 3 core.macros | 4 akkahttp.matchers.KebsAkkaHttpMatchers | 5 akkahttp.unmarshallers | 6 baklava.params | 7 baklava.params.enums | 8 baklava.params.enums.KebsBaklavaEnumsParams | 9 baklava.schema | 10 baklava.schema.enums | 11 baklava.schema.enums.KebsBaklavaEnumsSchema | 12 circe | 13 circe.enums | 14 circe.enums.KebsCirceEnums | 15 core.support | 16 doobie | 17 doobie.enums | 18 doobie.enums.KebsDoobieEnums | 19 enumeratum | 20 enums | 21 http4s | 22 http4s.KebsHttp4s | 23 http4sstir.matchers.KebsHttp4sStirMatchers | 24 http4sstir.unmarshallers | 25 instances.net | 26 instances.time | 27 instances.time.mixins | 28 instances.util | 29 jsonschema | 30 pekkohttp.matchers.KebsPekkoHttpMatchers | 31 pekkohttp.unmarshallers | 32 playjson | 33 slick | 34 sprayjson | 35 sprayjson.macros | 36 circe.KebsCirce | 37 circe.KebsCirceMacros | 38 instances | 39 jsonschema.macros | 40 slick.KebsSlickSupport |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 core.enums | ||||||||||||||||||||||||||||||||||||||||
| 2 core.instances | ||||||||||||||||||||||||||||||||||||||||
| 3 core.macros | ||||||||||||||||||||||||||||||||||||||||
| 4 akkahttp.matchers.KebsAkkaHttpMatchers | 2 | 1 | 1 | |||||||||||||||||||||||||||||||||||||
| 5 akkahttp.unmarshallers | 2 | 1 | 1 | |||||||||||||||||||||||||||||||||||||
| 6 baklava.params | 1 | 1 | ||||||||||||||||||||||||||||||||||||||
| 7 baklava.params.enums | 2 | |||||||||||||||||||||||||||||||||||||||
| 8 baklava.params.enums.KebsBaklavaEnumsParams | 2 | |||||||||||||||||||||||||||||||||||||||
| 9 baklava.schema | 1 | 1 | ||||||||||||||||||||||||||||||||||||||
| 10 baklava.schema.enums | 2 | |||||||||||||||||||||||||||||||||||||||
| 11 baklava.schema.enums.KebsBaklavaEnumsSchema | 2 | |||||||||||||||||||||||||||||||||||||||
| 12 circe | 1 | 2 | ||||||||||||||||||||||||||||||||||||||
| 13 circe.enums | 2 | |||||||||||||||||||||||||||||||||||||||
| 14 circe.enums.KebsCirceEnums | 2 | |||||||||||||||||||||||||||||||||||||||
| 15 core.support | 5 | |||||||||||||||||||||||||||||||||||||||
| 16 doobie | 1 | 1 | ||||||||||||||||||||||||||||||||||||||
| 17 doobie.enums | 2 | |||||||||||||||||||||||||||||||||||||||
| 18 doobie.enums.KebsDoobieEnums | 2 | |||||||||||||||||||||||||||||||||||||||
| 19 enumeratum | 2 | 1 | ||||||||||||||||||||||||||||||||||||||
| 20 enums | 2 | |||||||||||||||||||||||||||||||||||||||
| 21 http4s | 1 | 1 | 1 | |||||||||||||||||||||||||||||||||||||
| 22 http4s.KebsHttp4s | 1 | 4 | 4 | |||||||||||||||||||||||||||||||||||||
| 23 http4sstir.matchers.KebsHttp4sStirMatchers | 2 | 1 | 1 | |||||||||||||||||||||||||||||||||||||
| 24 http4sstir.unmarshallers | 4 | 2 | 2 | |||||||||||||||||||||||||||||||||||||
| 25 instances.net | 1 | |||||||||||||||||||||||||||||||||||||||
| 26 instances.time | 16 | |||||||||||||||||||||||||||||||||||||||
| 27 instances.time.mixins | 9 | |||||||||||||||||||||||||||||||||||||||
| 28 instances.util | 3 | |||||||||||||||||||||||||||||||||||||||
| 29 jsonschema | 1 | |||||||||||||||||||||||||||||||||||||||
| 30 pekkohttp.matchers.KebsPekkoHttpMatchers | 2 | 1 | 1 | |||||||||||||||||||||||||||||||||||||
| 31 pekkohttp.unmarshallers | 4 | 2 | 2 | |||||||||||||||||||||||||||||||||||||
| 32 playjson | 1 | 1 | ||||||||||||||||||||||||||||||||||||||
| 33 slick | 1 | |||||||||||||||||||||||||||||||||||||||
| 34 sprayjson | 2 | 1 | 1 | |||||||||||||||||||||||||||||||||||||
| 35 sprayjson.macros | 1 | |||||||||||||||||||||||||||||||||||||||
| 36 circe.KebsCirce | 2 | |||||||||||||||||||||||||||||||||||||||
| 37 circe.KebsCirceMacros | 2 | |||||||||||||||||||||||||||||||||||||||
| 38 instances | 1 | 16 | 3 | |||||||||||||||||||||||||||||||||||||
| 39 jsonschema.macros | 1 | 1 | ||||||||||||||||||||||||||||||||||||||
| 40 slick.KebsSlickSupport | 6 | 2 | 2 | 1 |
4→1 akkahttp.matchers.KebsAkkaHttpMatchers uses core.enums✕
- Connections
- 2 pairs of types, where a type in akkahttp.matchers.KebsAkkaHttpMatchers uses a type in core.enums.
- The types involved
pl.iterators.kebs.akkahttp.matchers.KebsAkkaHttpMatchers.SegmentEnumIsomorphism→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.akkahttp.matchers.KebsAkkaHttpMatchers.SegmentIsomorphism→pl.iterators.kebs.core.enums.ValueEnumLike
- Direction
- akkahttp.matchers.KebsAkkaHttpMatchers uses core.enums, so a change to core.enums can break akkahttp.matchers.KebsAkkaHttpMatchers, while a change to akkahttp.matchers.KebsAkkaHttpMatchers can't break core.enums.
- Position
- Below the diagonal: akkahttp.matchers.KebsAkkaHttpMatchers uses a module listed above it, which is the healthy direction.
4→2 akkahttp.matchers.KebsAkkaHttpMatchers uses core.instances✕
- Connections
- 1 pair of types, where a type in akkahttp.matchers.KebsAkkaHttpMatchers uses a type in core.instances.
- The types involved
pl.iterators.kebs.akkahttp.matchers.KebsAkkaHttpMatchers.SegmentConversion→pl.iterators.kebs.core.instances.InstanceConverter
- Direction
- akkahttp.matchers.KebsAkkaHttpMatchers uses core.instances, so a change to core.instances can break akkahttp.matchers.KebsAkkaHttpMatchers, while a change to akkahttp.matchers.KebsAkkaHttpMatchers can't break core.instances.
- Position
- Below the diagonal: akkahttp.matchers.KebsAkkaHttpMatchers uses a module listed above it, which is the healthy direction.
4→3 akkahttp.matchers.KebsAkkaHttpMatchers uses core.macros✕
- Connections
- 1 pair of types, where a type in akkahttp.matchers.KebsAkkaHttpMatchers uses a type in core.macros.
- The types involved
pl.iterators.kebs.akkahttp.matchers.KebsAkkaHttpMatchers.SegmentIsomorphism→pl.iterators.kebs.core.macros.ValueClassLike
- Direction
- akkahttp.matchers.KebsAkkaHttpMatchers uses core.macros, so a change to core.macros can break akkahttp.matchers.KebsAkkaHttpMatchers, while a change to akkahttp.matchers.KebsAkkaHttpMatchers can't break core.macros.
- Position
- Below the diagonal: akkahttp.matchers.KebsAkkaHttpMatchers uses a module listed above it, which is the healthy direction.
5→1 akkahttp.unmarshallers uses core.enums✕
- Connections
- 2 pairs of types, where a type in akkahttp.unmarshallers uses a type in core.enums.
- The types involved
pl.iterators.kebs.akkahttp.unmarshallers.KebsAkkaHttpEnumUnmarshallers→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.akkahttp.unmarshallers.KebsAkkaHttpValueEnumUnmarshallers→pl.iterators.kebs.core.enums.ValueEnumLike
- Direction
- akkahttp.unmarshallers uses core.enums, so a change to core.enums can break akkahttp.unmarshallers, while a change to akkahttp.unmarshallers can't break core.enums.
- Position
- Below the diagonal: akkahttp.unmarshallers uses a module listed above it, which is the healthy direction.
5→2 akkahttp.unmarshallers uses core.instances✕
- Connections
- 1 pair of types, where a type in akkahttp.unmarshallers uses a type in core.instances.
- The types involved
pl.iterators.kebs.akkahttp.unmarshallers.KebsAkkaHttpUnmarshallers→pl.iterators.kebs.core.instances.InstanceConverter
- Direction
- akkahttp.unmarshallers uses core.instances, so a change to core.instances can break akkahttp.unmarshallers, while a change to akkahttp.unmarshallers can't break core.instances.
- Position
- Below the diagonal: akkahttp.unmarshallers uses a module listed above it, which is the healthy direction.
5→3 akkahttp.unmarshallers uses core.macros✕
- Connections
- 1 pair of types, where a type in akkahttp.unmarshallers uses a type in core.macros.
- The types involved
pl.iterators.kebs.akkahttp.unmarshallers.KebsAkkaHttpUnmarshallers→pl.iterators.kebs.core.macros.ValueClassLike
- Direction
- akkahttp.unmarshallers uses core.macros, so a change to core.macros can break akkahttp.unmarshallers, while a change to akkahttp.unmarshallers can't break core.macros.
- Position
- Below the diagonal: akkahttp.unmarshallers uses a module listed above it, which is the healthy direction.
6→2 baklava.params uses core.instances✕
- Connections
- 1 pair of types, where a type in baklava.params uses a type in core.instances.
- The types involved
pl.iterators.kebs.baklava.params.KebsBaklavaParams→pl.iterators.kebs.core.instances.InstanceConverter
- Direction
- baklava.params uses core.instances, so a change to core.instances can break baklava.params, while a change to baklava.params can't break core.instances.
- Position
- Below the diagonal: baklava.params uses a module listed above it, which is the healthy direction.
6→3 baklava.params uses core.macros✕
- Connections
- 1 pair of types, where a type in baklava.params uses a type in core.macros.
- The types involved
pl.iterators.kebs.baklava.params.KebsBaklavaParams→pl.iterators.kebs.core.macros.ValueClassLike
- Direction
- baklava.params uses core.macros, so a change to core.macros can break baklava.params, while a change to baklava.params can't break core.macros.
- Position
- Below the diagonal: baklava.params uses a module listed above it, which is the healthy direction.
7→1 baklava.params.enums uses core.enums✕
- Connections
- 2 pairs of types, where a type in baklava.params.enums uses a type in core.enums.
- The types involved
pl.iterators.kebs.baklava.params.enums.KebsBaklavaEnumsParams→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.baklava.params.enums.KebsBaklavaValueEnumsParams→pl.iterators.kebs.core.enums.ValueEnumLike
- Direction
- baklava.params.enums uses core.enums, so a change to core.enums can break baklava.params.enums, while a change to baklava.params.enums can't break core.enums.
- Position
- Below the diagonal: baklava.params.enums uses a module listed above it, which is the healthy direction.
8→1 baklava.params.enums.KebsBaklavaEnumsParams uses core.enums✕
- Connections
- 2 pairs of types, where a type in baklava.params.enums.KebsBaklavaEnumsParams uses a type in core.enums.
- The types involved
pl.iterators.kebs.baklava.params.enums.KebsBaklavaEnumsParams.KebsBaklavaEnumsLowercaseParams→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.baklava.params.enums.KebsBaklavaEnumsParams.KebsBaklavaEnumsUppercaseParams→pl.iterators.kebs.core.enums.EnumLike
- Direction
- baklava.params.enums.KebsBaklavaEnumsParams uses core.enums, so a change to core.enums can break baklava.params.enums.KebsBaklavaEnumsParams, while a change to baklava.params.enums.KebsBaklavaEnumsParams can't break core.enums.
- Position
- Below the diagonal: baklava.params.enums.KebsBaklavaEnumsParams uses a module listed above it, which is the healthy direction.
9→2 baklava.schema uses core.instances✕
- Connections
- 1 pair of types, where a type in baklava.schema uses a type in core.instances.
- The types involved
pl.iterators.kebs.baklava.schema.KebsBaklavaSchema→pl.iterators.kebs.core.instances.InstanceConverter
- Direction
- baklava.schema uses core.instances, so a change to core.instances can break baklava.schema, while a change to baklava.schema can't break core.instances.
- Position
- Below the diagonal: baklava.schema uses a module listed above it, which is the healthy direction.
9→3 baklava.schema uses core.macros✕
- Connections
- 1 pair of types, where a type in baklava.schema uses a type in core.macros.
- The types involved
pl.iterators.kebs.baklava.schema.KebsBaklavaSchema→pl.iterators.kebs.core.macros.ValueClassLike
- Direction
- baklava.schema uses core.macros, so a change to core.macros can break baklava.schema, while a change to baklava.schema can't break core.macros.
- Position
- Below the diagonal: baklava.schema uses a module listed above it, which is the healthy direction.
10→1 baklava.schema.enums uses core.enums✕
- Connections
- 2 pairs of types, where a type in baklava.schema.enums uses a type in core.enums.
- The types involved
pl.iterators.kebs.baklava.schema.enums.KebsBaklavaEnumsSchema→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.baklava.schema.enums.KebsBaklavaValueEnumsSchema→pl.iterators.kebs.core.enums.ValueEnumLike
- Direction
- baklava.schema.enums uses core.enums, so a change to core.enums can break baklava.schema.enums, while a change to baklava.schema.enums can't break core.enums.
- Position
- Below the diagonal: baklava.schema.enums uses a module listed above it, which is the healthy direction.
11→1 baklava.schema.enums.KebsBaklavaEnumsSchema uses core.enums✕
- Connections
- 2 pairs of types, where a type in baklava.schema.enums.KebsBaklavaEnumsSchema uses a type in core.enums.
- The types involved
pl.iterators.kebs.baklava.schema.enums.KebsBaklavaEnumsSchema.KebsBaklavaEnumsLowercaseSchema→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.baklava.schema.enums.KebsBaklavaEnumsSchema.KebsBaklavaEnumsUppercaseSchema→pl.iterators.kebs.core.enums.EnumLike
- Direction
- baklava.schema.enums.KebsBaklavaEnumsSchema uses core.enums, so a change to core.enums can break baklava.schema.enums.KebsBaklavaEnumsSchema, while a change to baklava.schema.enums.KebsBaklavaEnumsSchema can't break core.enums.
- Position
- Below the diagonal: baklava.schema.enums.KebsBaklavaEnumsSchema uses a module listed above it, which is the healthy direction.
12→2 circe uses core.instances✕
- Connections
- 1 pair of types, where a type in circe uses a type in core.instances.
- The types involved
pl.iterators.kebs.circe.KebsCirce→pl.iterators.kebs.core.instances.InstanceConverter
- Direction
- circe uses core.instances, so a change to core.instances can break circe, while a change to circe can't break core.instances.
- Position
- Below the diagonal: circe uses a module listed above it, which is the healthy direction.
12→3 circe uses core.macros✕
- Connections
- 2 pairs of types, where a type in circe uses a type in core.macros.
- The types involved
pl.iterators.kebs.circe.KebsCirce→pl.iterators.kebs.core.macros.ValueClassLikepl.iterators.kebs.circe.KebsCirceMacros→pl.iterators.kebs.core.macros.MacroUtils
- Direction
- circe uses core.macros, so a change to core.macros can break circe, while a change to circe can't break core.macros.
- Position
- Below the diagonal: circe uses a module listed above it, which is the healthy direction.
13→1 circe.enums uses core.enums✕
- Connections
- 2 pairs of types, where a type in circe.enums uses a type in core.enums.
- The types involved
pl.iterators.kebs.circe.enums.KebsCirceEnums→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.circe.enums.KebsCirceValueEnums→pl.iterators.kebs.core.enums.ValueEnumLike
- Direction
- circe.enums uses core.enums, so a change to core.enums can break circe.enums, while a change to circe.enums can't break core.enums.
- Position
- Below the diagonal: circe.enums uses a module listed above it, which is the healthy direction.
14→1 circe.enums.KebsCirceEnums uses core.enums✕
- Connections
- 2 pairs of types, where a type in circe.enums.KebsCirceEnums uses a type in core.enums.
- The types involved
pl.iterators.kebs.circe.enums.KebsCirceEnums.KebsCirceEnumsLowercase→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.circe.enums.KebsCirceEnums.KebsCirceEnumsUppercase→pl.iterators.kebs.core.enums.EnumLike
- Direction
- circe.enums.KebsCirceEnums uses core.enums, so a change to core.enums can break circe.enums.KebsCirceEnums, while a change to circe.enums.KebsCirceEnums can't break core.enums.
- Position
- Below the diagonal: circe.enums.KebsCirceEnums uses a module listed above it, which is the healthy direction.
15→3 core.support uses core.macros✕
- Connections
- 5 pairs of types, where a type in core.support uses a type in core.macros.
- The types involved
pl.iterators.kebs.core.support.EquivSupport→pl.iterators.kebs.core.macros.ValueClassLikepl.iterators.kebs.core.support.FractionalSupport→pl.iterators.kebs.core.macros.ValueClassLikepl.iterators.kebs.core.support.IntegralSupport→pl.iterators.kebs.core.macros.ValueClassLikepl.iterators.kebs.core.support.NumericSupport→pl.iterators.kebs.core.macros.ValueClassLikepl.iterators.kebs.core.support.PartialOrderingSupport→pl.iterators.kebs.core.macros.ValueClassLike
- Direction
- core.support uses core.macros, so a change to core.macros can break core.support, while a change to core.support can't break core.macros.
- Position
- Below the diagonal: core.support uses a module listed above it, which is the healthy direction.
16→2 doobie uses core.instances✕
- Connections
- 1 pair of types, where a type in doobie uses a type in core.instances.
- The types involved
pl.iterators.kebs.doobie.KebsDoobie→pl.iterators.kebs.core.instances.InstanceConverter
- Direction
- doobie uses core.instances, so a change to core.instances can break doobie, while a change to doobie can't break core.instances.
- Position
- Below the diagonal: doobie uses a module listed above it, which is the healthy direction.
16→3 doobie uses core.macros✕
- Connections
- 1 pair of types, where a type in doobie uses a type in core.macros.
- The types involved
pl.iterators.kebs.doobie.KebsDoobie→pl.iterators.kebs.core.macros.ValueClassLike
- Direction
- doobie uses core.macros, so a change to core.macros can break doobie, while a change to doobie can't break core.macros.
- Position
- Below the diagonal: doobie uses a module listed above it, which is the healthy direction.
17→1 doobie.enums uses core.enums✕
- Connections
- 2 pairs of types, where a type in doobie.enums uses a type in core.enums.
- The types involved
pl.iterators.kebs.doobie.enums.KebsDoobieEnums→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.doobie.enums.KebsDoobieValueEnums→pl.iterators.kebs.core.enums.ValueEnumLike
- Direction
- doobie.enums uses core.enums, so a change to core.enums can break doobie.enums, while a change to doobie.enums can't break core.enums.
- Position
- Below the diagonal: doobie.enums uses a module listed above it, which is the healthy direction.
18→1 doobie.enums.KebsDoobieEnums uses core.enums✕
- Connections
- 2 pairs of types, where a type in doobie.enums.KebsDoobieEnums uses a type in core.enums.
- The types involved
pl.iterators.kebs.doobie.enums.KebsDoobieEnums.KebsDoobieEnumsLowercase→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.doobie.enums.KebsDoobieEnums.KebsDoobieEnumsUppercase→pl.iterators.kebs.core.enums.EnumLike
- Direction
- doobie.enums.KebsDoobieEnums uses core.enums, so a change to core.enums can break doobie.enums.KebsDoobieEnums, while a change to doobie.enums.KebsDoobieEnums can't break core.enums.
- Position
- Below the diagonal: doobie.enums.KebsDoobieEnums uses a module listed above it, which is the healthy direction.
19→1 enumeratum uses core.enums✕
- Connections
- 2 pairs of types, where a type in enumeratum uses a type in core.enums.
- The types involved
pl.iterators.kebs.enumeratum.EnumeratumEntryMacros→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.enumeratum.ValueEnumEntryMacros→pl.iterators.kebs.core.enums.ValueEnumLike
- Direction
- enumeratum uses core.enums, so a change to core.enums can break enumeratum, while a change to enumeratum can't break core.enums.
- Position
- Below the diagonal: enumeratum uses a module listed above it, which is the healthy direction.
19→3 enumeratum uses core.macros✕
- Connections
- 1 pair of types, where a type in enumeratum uses a type in core.macros.
- The types involved
pl.iterators.kebs.enumeratum.EnumeratumEntryMacros→pl.iterators.kebs.core.macros.MacroUtils
- Direction
- enumeratum uses core.macros, so a change to core.macros can break enumeratum, while a change to enumeratum can't break core.macros.
- Position
- Below the diagonal: enumeratum uses a module listed above it, which is the healthy direction.
20→1 enums uses core.enums✕
- Connections
- 2 pairs of types, where a type in enums uses a type in core.enums.
- The types involved
pl.iterators.kebs.enums.EnumerationEntryMacros→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.enums.KebsValueEnum→pl.iterators.kebs.core.enums.ValueEnumLike
- Direction
- enums uses core.enums, so a change to core.enums can break enums, while a change to enums can't break core.enums.
- Position
- Below the diagonal: enums uses a module listed above it, which is the healthy direction.
21→1 http4s uses core.enums✕
- Connections
- 1 pair of types, where a type in http4s uses a type in core.enums.
- The types involved
pl.iterators.kebs.http4s.KebsHttp4s→pl.iterators.kebs.core.enums.EnumLike
- Direction
- http4s uses core.enums, so a change to core.enums can break http4s, while a change to http4s can't break core.enums.
- Position
- Below the diagonal: http4s uses a module listed above it, which is the healthy direction.
21→2 http4s uses core.instances✕
- Connections
- 1 pair of types, where a type in http4s uses a type in core.instances.
- The types involved
pl.iterators.kebs.http4s.KebsHttp4s→pl.iterators.kebs.core.instances.InstanceConverter
- Direction
- http4s uses core.instances, so a change to core.instances can break http4s, while a change to http4s can't break core.instances.
- Position
- Below the diagonal: http4s uses a module listed above it, which is the healthy direction.
21→3 http4s uses core.macros✕
- Connections
- 1 pair of types, where a type in http4s uses a type in core.macros.
- The types involved
pl.iterators.kebs.http4s.KebsHttp4s→pl.iterators.kebs.core.macros.ValueClassLike
- Direction
- http4s uses core.macros, so a change to core.macros can break http4s, while a change to http4s can't break core.macros.
- Position
- Below the diagonal: http4s uses a module listed above it, which is the healthy direction.
22→1 http4s.KebsHttp4s uses core.enums✕
- Connections
- 1 pair of types, where a type in http4s.KebsHttp4s uses a type in core.enums.
- The types involved
pl.iterators.kebs.http4s.KebsHttp4s.EnumString→pl.iterators.kebs.core.enums.EnumLike
- Direction
- http4s.KebsHttp4s uses core.enums, so a change to core.enums can break http4s.KebsHttp4s, while a change to http4s.KebsHttp4s can't break core.enums.
- Position
- Below the diagonal: http4s.KebsHttp4s uses a module listed above it, which is the healthy direction.
22→2 http4s.KebsHttp4s uses core.instances✕
- Connections
- 4 pairs of types, where a type in http4s.KebsHttp4s uses a type in core.instances.
- The types involved
pl.iterators.kebs.http4s.KebsHttp4s.InstanceInt→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.http4s.KebsHttp4s.InstanceLong→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.http4s.KebsHttp4s.InstanceString→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.http4s.KebsHttp4s.InstanceUUID→pl.iterators.kebs.core.instances.InstanceConverter
- Direction
- http4s.KebsHttp4s uses core.instances, so a change to core.instances can break http4s.KebsHttp4s, while a change to http4s.KebsHttp4s can't break core.instances.
- Position
- Below the diagonal: http4s.KebsHttp4s uses a module listed above it, which is the healthy direction.
22→3 http4s.KebsHttp4s uses core.macros✕
- Connections
- 4 pairs of types, where a type in http4s.KebsHttp4s uses a type in core.macros.
- The types involved
pl.iterators.kebs.http4s.KebsHttp4s.WrappedInt→pl.iterators.kebs.core.macros.ValueClassLikepl.iterators.kebs.http4s.KebsHttp4s.WrappedLong→pl.iterators.kebs.core.macros.ValueClassLikepl.iterators.kebs.http4s.KebsHttp4s.WrappedString→pl.iterators.kebs.core.macros.ValueClassLikepl.iterators.kebs.http4s.KebsHttp4s.WrappedUUID→pl.iterators.kebs.core.macros.ValueClassLike
- Direction
- http4s.KebsHttp4s uses core.macros, so a change to core.macros can break http4s.KebsHttp4s, while a change to http4s.KebsHttp4s can't break core.macros.
- Position
- Below the diagonal: http4s.KebsHttp4s uses a module listed above it, which is the healthy direction.
23→1 http4sstir.matchers.KebsHttp4sStirMatchers uses core.enums✕
- Connections
- 2 pairs of types, where a type in http4sstir.matchers.KebsHttp4sStirMatchers uses a type in core.enums.
- The types involved
pl.iterators.kebs.http4sstir.matchers.KebsHttp4sStirMatchers.SegmentEnumIsomorphism→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.http4sstir.matchers.KebsHttp4sStirMatchers.SegmentIsomorphism→pl.iterators.kebs.core.enums.ValueEnumLike
- Direction
- http4sstir.matchers.KebsHttp4sStirMatchers uses core.enums, so a change to core.enums can break http4sstir.matchers.KebsHttp4sStirMatchers, while a change to http4sstir.matchers.KebsHttp4sStirMatchers can't break core.enums.
- Position
- Below the diagonal: http4sstir.matchers.KebsHttp4sStirMatchers uses a module listed above it, which is the healthy direction.
23→2 http4sstir.matchers.KebsHttp4sStirMatchers uses core.instances✕
- Connections
- 1 pair of types, where a type in http4sstir.matchers.KebsHttp4sStirMatchers uses a type in core.instances.
- The types involved
pl.iterators.kebs.http4sstir.matchers.KebsHttp4sStirMatchers.SegmentConversion→pl.iterators.kebs.core.instances.InstanceConverter
- Direction
- http4sstir.matchers.KebsHttp4sStirMatchers uses core.instances, so a change to core.instances can break http4sstir.matchers.KebsHttp4sStirMatchers, while a change to http4sstir.matchers.KebsHttp4sStirMatchers can't break core.instances.
- Position
- Below the diagonal: http4sstir.matchers.KebsHttp4sStirMatchers uses a module listed above it, which is the healthy direction.
23→3 http4sstir.matchers.KebsHttp4sStirMatchers uses core.macros✕
- Connections
- 1 pair of types, where a type in http4sstir.matchers.KebsHttp4sStirMatchers uses a type in core.macros.
- The types involved
pl.iterators.kebs.http4sstir.matchers.KebsHttp4sStirMatchers.SegmentIsomorphism→pl.iterators.kebs.core.macros.ValueClassLike
- Direction
- http4sstir.matchers.KebsHttp4sStirMatchers uses core.macros, so a change to core.macros can break http4sstir.matchers.KebsHttp4sStirMatchers, while a change to http4sstir.matchers.KebsHttp4sStirMatchers can't break core.macros.
- Position
- Below the diagonal: http4sstir.matchers.KebsHttp4sStirMatchers uses a module listed above it, which is the healthy direction.
24→1 http4sstir.unmarshallers uses core.enums✕
- Connections
- 4 pairs of types, where a type in http4sstir.unmarshallers uses a type in core.enums.
- The types involved
pl.iterators.kebs.http4sstir.unmarshallers.KebsHttp4sStirEnumUnmarshallers→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.http4sstir.unmarshallers.KebsHttp4sStirUnmarshallers→pl.iterators.kebs.core.enums.ValueEnumLikepl.iterators.kebs.http4sstir.unmarshallers.KebsHttp4sStirValueEnumUnmarshallers→pl.iterators.kebs.core.enums.ValueEnumLikepl.iterators.kebs.http4sstir.unmarshallers.LowerPriorityKebsHttp4sStirValueEnumUnmarshallers→pl.iterators.kebs.core.enums.ValueEnumLike
- Direction
- http4sstir.unmarshallers uses core.enums, so a change to core.enums can break http4sstir.unmarshallers, while a change to http4sstir.unmarshallers can't break core.enums.
- Position
- Below the diagonal: http4sstir.unmarshallers uses a module listed above it, which is the healthy direction.
24→2 http4sstir.unmarshallers uses core.instances✕
- Connections
- 2 pairs of types, where a type in http4sstir.unmarshallers uses a type in core.instances.
- The types involved
pl.iterators.kebs.http4sstir.unmarshallers.KebsHttp4sStirUnmarshallers→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.http4sstir.unmarshallers.LowPriorityKebsUnmarshallers→pl.iterators.kebs.core.instances.InstanceConverter
- Direction
- http4sstir.unmarshallers uses core.instances, so a change to core.instances can break http4sstir.unmarshallers, while a change to http4sstir.unmarshallers can't break core.instances.
- Position
- Below the diagonal: http4sstir.unmarshallers uses a module listed above it, which is the healthy direction.
24→3 http4sstir.unmarshallers uses core.macros✕
- Connections
- 2 pairs of types, where a type in http4sstir.unmarshallers uses a type in core.macros.
- The types involved
pl.iterators.kebs.http4sstir.unmarshallers.KebsHttp4sStirUnmarshallers→pl.iterators.kebs.core.macros.ValueClassLikepl.iterators.kebs.http4sstir.unmarshallers.LowPriorityKebsUnmarshallers→pl.iterators.kebs.core.macros.ValueClassLike
- Direction
- http4sstir.unmarshallers uses core.macros, so a change to core.macros can break http4sstir.unmarshallers, while a change to http4sstir.unmarshallers can't break core.macros.
- Position
- Below the diagonal: http4sstir.unmarshallers uses a module listed above it, which is the healthy direction.
25→2 instances.net uses core.instances✕
- Connections
- 1 pair of types, where a type in instances.net uses a type in core.instances.
- The types involved
pl.iterators.kebs.instances.net.URIString→pl.iterators.kebs.core.instances.InstanceConverter
- Direction
- instances.net uses core.instances, so a change to core.instances can break instances.net, while a change to instances.net can't break core.instances.
- Position
- Below the diagonal: instances.net uses a module listed above it, which is the healthy direction.
26→2 instances.time uses core.instances✕
- Connections
- 16 pairs of types, where a type in instances.time uses a type in core.instances.
- The types involved
pl.iterators.kebs.instances.time.DayOfWeekInt→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.DurationString→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.InstantString→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.LocalDateString→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.LocalDateTimeString→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.LocalTimeString→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.MonthDayString→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.MonthInt→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.OffsetDateTimeString→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.OffsetTimeString→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.PeriodString→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.YearInt→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.YearMonthString→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.ZoneIdString→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.ZoneOffsetString→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.ZonedDateTimeString→pl.iterators.kebs.core.instances.InstanceConverter
- Direction
- instances.time uses core.instances, so a change to core.instances can break instances.time, while a change to instances.time can't break core.instances.
- Position
- Below the diagonal: instances.time uses a module listed above it, which is the healthy direction.
27→2 instances.time.mixins uses core.instances✕
- Connections
- 9 pairs of types, where a type in instances.time.mixins uses a type in core.instances.
- The types involved
pl.iterators.kebs.instances.time.mixins.DurationMillisLong→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.mixins.DurationMinutesLong→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.mixins.DurationNanosLong→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.mixins.DurationSecondsLong→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.mixins.InstantEpochMilliLong→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.mixins.InstantEpochSecondLong→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.mixins.PeriodDays→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.mixins.PeriodMonthsInt→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.time.mixins.PeriodYearsInt→pl.iterators.kebs.core.instances.InstanceConverter
- Direction
- instances.time.mixins uses core.instances, so a change to core.instances can break instances.time.mixins, while a change to instances.time.mixins can't break core.instances.
- Position
- Below the diagonal: instances.time.mixins uses a module listed above it, which is the healthy direction.
28→2 instances.util uses core.instances✕
- Connections
- 3 pairs of types, where a type in instances.util uses a type in core.instances.
- The types involved
pl.iterators.kebs.instances.util.CurrencyString→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.util.LocaleString→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.instances.util.UUIDString→pl.iterators.kebs.core.instances.InstanceConverter
- Direction
- instances.util uses core.instances, so a change to core.instances can break instances.util, while a change to instances.util can't break core.instances.
- Position
- Below the diagonal: instances.util uses a module listed above it, which is the healthy direction.
29→3 jsonschema uses core.macros✕
- Connections
- 1 pair of types, where a type in jsonschema uses a type in core.macros.
- The types involved
pl.iterators.kebs.jsonschema.KebsJsonSchema→pl.iterators.kebs.core.macros.ValueClassLike
- Direction
- jsonschema uses core.macros, so a change to core.macros can break jsonschema, while a change to jsonschema can't break core.macros.
- Position
- Below the diagonal: jsonschema uses a module listed above it, which is the healthy direction.
30→1 pekkohttp.matchers.KebsPekkoHttpMatchers uses core.enums✕
- Connections
- 2 pairs of types, where a type in pekkohttp.matchers.KebsPekkoHttpMatchers uses a type in core.enums.
- The types involved
pl.iterators.kebs.pekkohttp.matchers.KebsPekkoHttpMatchers.SegmentEnumIsomorphism→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.pekkohttp.matchers.KebsPekkoHttpMatchers.SegmentIsomorphism→pl.iterators.kebs.core.enums.ValueEnumLike
- Direction
- pekkohttp.matchers.KebsPekkoHttpMatchers uses core.enums, so a change to core.enums can break pekkohttp.matchers.KebsPekkoHttpMatchers, while a change to pekkohttp.matchers.KebsPekkoHttpMatchers can't break core.enums.
- Position
- Below the diagonal: pekkohttp.matchers.KebsPekkoHttpMatchers uses a module listed above it, which is the healthy direction.
30→2 pekkohttp.matchers.KebsPekkoHttpMatchers uses core.instances✕
- Connections
- 1 pair of types, where a type in pekkohttp.matchers.KebsPekkoHttpMatchers uses a type in core.instances.
- The types involved
pl.iterators.kebs.pekkohttp.matchers.KebsPekkoHttpMatchers.SegmentConversion→pl.iterators.kebs.core.instances.InstanceConverter
- Direction
- pekkohttp.matchers.KebsPekkoHttpMatchers uses core.instances, so a change to core.instances can break pekkohttp.matchers.KebsPekkoHttpMatchers, while a change to pekkohttp.matchers.KebsPekkoHttpMatchers can't break core.instances.
- Position
- Below the diagonal: pekkohttp.matchers.KebsPekkoHttpMatchers uses a module listed above it, which is the healthy direction.
30→3 pekkohttp.matchers.KebsPekkoHttpMatchers uses core.macros✕
- Connections
- 1 pair of types, where a type in pekkohttp.matchers.KebsPekkoHttpMatchers uses a type in core.macros.
- The types involved
pl.iterators.kebs.pekkohttp.matchers.KebsPekkoHttpMatchers.SegmentIsomorphism→pl.iterators.kebs.core.macros.ValueClassLike
- Direction
- pekkohttp.matchers.KebsPekkoHttpMatchers uses core.macros, so a change to core.macros can break pekkohttp.matchers.KebsPekkoHttpMatchers, while a change to pekkohttp.matchers.KebsPekkoHttpMatchers can't break core.macros.
- Position
- Below the diagonal: pekkohttp.matchers.KebsPekkoHttpMatchers uses a module listed above it, which is the healthy direction.
31→1 pekkohttp.unmarshallers uses core.enums✕
- Connections
- 4 pairs of types, where a type in pekkohttp.unmarshallers uses a type in core.enums.
- The types involved
pl.iterators.kebs.pekkohttp.unmarshallers.KebsPekkoHttpEnumUnmarshallers→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.pekkohttp.unmarshallers.KebsPekkoHttpUnmarshallers→pl.iterators.kebs.core.enums.ValueEnumLikepl.iterators.kebs.pekkohttp.unmarshallers.KebsPekkoHttpValueEnumUnmarshallers→pl.iterators.kebs.core.enums.ValueEnumLikepl.iterators.kebs.pekkohttp.unmarshallers.LowerPriorityKebsPekkoHttpValueEnumUnmarshallers→pl.iterators.kebs.core.enums.ValueEnumLike
- Direction
- pekkohttp.unmarshallers uses core.enums, so a change to core.enums can break pekkohttp.unmarshallers, while a change to pekkohttp.unmarshallers can't break core.enums.
- Position
- Below the diagonal: pekkohttp.unmarshallers uses a module listed above it, which is the healthy direction.
31→2 pekkohttp.unmarshallers uses core.instances✕
- Connections
- 2 pairs of types, where a type in pekkohttp.unmarshallers uses a type in core.instances.
- The types involved
pl.iterators.kebs.pekkohttp.unmarshallers.KebsPekkoHttpUnmarshallers→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.pekkohttp.unmarshallers.LowPriorityKebsPekkoHttpUnmarshallers→pl.iterators.kebs.core.instances.InstanceConverter
- Direction
- pekkohttp.unmarshallers uses core.instances, so a change to core.instances can break pekkohttp.unmarshallers, while a change to pekkohttp.unmarshallers can't break core.instances.
- Position
- Below the diagonal: pekkohttp.unmarshallers uses a module listed above it, which is the healthy direction.
31→3 pekkohttp.unmarshallers uses core.macros✕
- Connections
- 2 pairs of types, where a type in pekkohttp.unmarshallers uses a type in core.macros.
- The types involved
pl.iterators.kebs.pekkohttp.unmarshallers.KebsPekkoHttpUnmarshallers→pl.iterators.kebs.core.macros.ValueClassLikepl.iterators.kebs.pekkohttp.unmarshallers.LowPriorityKebsPekkoHttpUnmarshallers→pl.iterators.kebs.core.macros.ValueClassLike
- Direction
- pekkohttp.unmarshallers uses core.macros, so a change to core.macros can break pekkohttp.unmarshallers, while a change to pekkohttp.unmarshallers can't break core.macros.
- Position
- Below the diagonal: pekkohttp.unmarshallers uses a module listed above it, which is the healthy direction.
32→2 playjson uses core.instances✕
- Connections
- 1 pair of types, where a type in playjson uses a type in core.instances.
- The types involved
pl.iterators.kebs.playjson.KebsPlayJson→pl.iterators.kebs.core.instances.InstanceConverter
- Direction
- playjson uses core.instances, so a change to core.instances can break playjson, while a change to playjson can't break core.instances.
- Position
- Below the diagonal: playjson uses a module listed above it, which is the healthy direction.
32→3 playjson uses core.macros✕
- Connections
- 1 pair of types, where a type in playjson uses a type in core.macros.
- The types involved
pl.iterators.kebs.playjson.KebsPlayJson→pl.iterators.kebs.core.macros.ValueClassLike
- Direction
- playjson uses core.macros, so a change to core.macros can break playjson, while a change to playjson can't break core.macros.
- Position
- Below the diagonal: playjson uses a module listed above it, which is the healthy direction.
33→3 slick uses core.macros✕
- Connections
- 1 pair of types, where a type in slick uses a type in core.macros.
- The types involved
pl.iterators.kebs.slick.KebsColumnExtensionMethods→pl.iterators.kebs.core.macros.ValueClassLike
- Direction
- slick uses core.macros, so a change to core.macros can break slick, while a change to slick can't break core.macros.
- Position
- Below the diagonal: slick uses a module listed above it, which is the healthy direction.
34→1 sprayjson uses core.enums✕
- Connections
- 2 pairs of types, where a type in sprayjson uses a type in core.enums.
- The types involved
pl.iterators.kebs.sprayjson.KebsSprayJsonEnums→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.sprayjson.KebsSprayJsonValueEnums→pl.iterators.kebs.core.enums.ValueEnumLike
- Direction
- sprayjson uses core.enums, so a change to core.enums can break sprayjson, while a change to sprayjson can't break core.enums.
- Position
- Below the diagonal: sprayjson uses a module listed above it, which is the healthy direction.
34→2 sprayjson uses core.instances✕
- Connections
- 1 pair of types, where a type in sprayjson uses a type in core.instances.
- The types involved
pl.iterators.kebs.sprayjson.KebsSprayJson→pl.iterators.kebs.core.instances.InstanceConverter
- Direction
- sprayjson uses core.instances, so a change to core.instances can break sprayjson, while a change to sprayjson can't break core.instances.
- Position
- Below the diagonal: sprayjson uses a module listed above it, which is the healthy direction.
34→3 sprayjson uses core.macros✕
- Connections
- 1 pair of types, where a type in sprayjson uses a type in core.macros.
- The types involved
pl.iterators.kebs.sprayjson.KebsSprayJson→pl.iterators.kebs.core.macros.ValueClassLike
- Direction
- sprayjson uses core.macros, so a change to core.macros can break sprayjson, while a change to sprayjson can't break core.macros.
- Position
- Below the diagonal: sprayjson uses a module listed above it, which is the healthy direction.
35→3 sprayjson.macros uses core.macros✕
- Connections
- 1 pair of types, where a type in sprayjson.macros uses a type in core.macros.
- The types involved
pl.iterators.kebs.sprayjson.macros.KebsSprayMacros→pl.iterators.kebs.core.macros.MacroUtils
- Direction
- sprayjson.macros uses core.macros, so a change to core.macros can break sprayjson.macros, while a change to sprayjson.macros can't break core.macros.
- Position
- Below the diagonal: sprayjson.macros uses a module listed above it, which is the healthy direction.
36→12 circe.KebsCirce uses circe✕
- Connections
- 2 pairs of types, where a type in circe.KebsCirce uses a type in circe.
- The types involved
pl.iterators.kebs.circe.KebsCirce.KebsCirceCapitalized→pl.iterators.kebs.circe.KebsCircepl.iterators.kebs.circe.KebsCirce.KebsCirceSnakified→pl.iterators.kebs.circe.KebsCirce
- Direction
- circe.KebsCirce uses circe, so a change to circe can break circe.KebsCirce, while a change to circe.KebsCirce can't break circe.
- Position
- Below the diagonal: circe.KebsCirce uses a module listed above it, which is the healthy direction.
37→12 circe.KebsCirceMacros uses circe✕
- Connections
- 2 pairs of types, where a type in circe.KebsCirceMacros uses a type in circe.
- The types involved
pl.iterators.kebs.circe.KebsCirceMacros.CapitalizedCamelCase→pl.iterators.kebs.circe.KebsCirceMacrospl.iterators.kebs.circe.KebsCirceMacros.SnakifyVariant→pl.iterators.kebs.circe.KebsCirceMacros
- Direction
- circe.KebsCirceMacros uses circe, so a change to circe can break circe.KebsCirceMacros, while a change to circe.KebsCirceMacros can't break circe.
- Position
- Below the diagonal: circe.KebsCirceMacros uses a module listed above it, which is the healthy direction.
38→25 instances uses instances.net✕
- Connections
- 1 pair of types, where a type in instances uses a type in instances.net.
- The types involved
pl.iterators.kebs.instances.NetInstances→pl.iterators.kebs.instances.net.URIString
- Direction
- instances uses instances.net, so a change to instances.net can break instances, while a change to instances can't break instances.net.
- Position
- Below the diagonal: instances uses a module listed above it, which is the healthy direction.
38→26 instances uses instances.time✕
- Connections
- 16 pairs of types, where a type in instances uses a type in instances.time.
- The types involved
pl.iterators.kebs.instances.TimeInstances→pl.iterators.kebs.instances.time.DayOfWeekIntpl.iterators.kebs.instances.TimeInstances→pl.iterators.kebs.instances.time.DurationStringpl.iterators.kebs.instances.TimeInstances→pl.iterators.kebs.instances.time.InstantStringpl.iterators.kebs.instances.TimeInstances→pl.iterators.kebs.instances.time.LocalDateStringpl.iterators.kebs.instances.TimeInstances→pl.iterators.kebs.instances.time.LocalDateTimeStringpl.iterators.kebs.instances.TimeInstances→pl.iterators.kebs.instances.time.LocalTimeStringpl.iterators.kebs.instances.TimeInstances→pl.iterators.kebs.instances.time.MonthDayStringpl.iterators.kebs.instances.TimeInstances→pl.iterators.kebs.instances.time.MonthIntpl.iterators.kebs.instances.TimeInstances→pl.iterators.kebs.instances.time.OffsetDateTimeStringpl.iterators.kebs.instances.TimeInstances→pl.iterators.kebs.instances.time.OffsetTimeStringpl.iterators.kebs.instances.TimeInstances→pl.iterators.kebs.instances.time.PeriodStringpl.iterators.kebs.instances.TimeInstances→pl.iterators.kebs.instances.time.YearIntpl.iterators.kebs.instances.TimeInstances→pl.iterators.kebs.instances.time.YearMonthStringpl.iterators.kebs.instances.TimeInstances→pl.iterators.kebs.instances.time.ZoneIdStringpl.iterators.kebs.instances.TimeInstances→pl.iterators.kebs.instances.time.ZoneOffsetStringpl.iterators.kebs.instances.TimeInstances→pl.iterators.kebs.instances.time.ZonedDateTimeString
- Direction
- instances uses instances.time, so a change to instances.time can break instances, while a change to instances can't break instances.time.
- Position
- Below the diagonal: instances uses a module listed above it, which is the healthy direction.
38→28 instances uses instances.util✕
- Connections
- 3 pairs of types, where a type in instances uses a type in instances.util.
- The types involved
pl.iterators.kebs.instances.UtilInstances→pl.iterators.kebs.instances.util.CurrencyStringpl.iterators.kebs.instances.UtilInstances→pl.iterators.kebs.instances.util.LocaleStringpl.iterators.kebs.instances.UtilInstances→pl.iterators.kebs.instances.util.UUIDString
- Direction
- instances uses instances.util, so a change to instances.util can break instances, while a change to instances can't break instances.util.
- Position
- Below the diagonal: instances uses a module listed above it, which is the healthy direction.
39→3 jsonschema.macros uses core.macros✕
- Connections
- 1 pair of types, where a type in jsonschema.macros uses a type in core.macros.
- The types involved
pl.iterators.kebs.jsonschema.macros.KebsJsonSchemaMacros→pl.iterators.kebs.core.macros.MacroUtils
- Direction
- jsonschema.macros uses core.macros, so a change to core.macros can break jsonschema.macros, while a change to jsonschema.macros can't break core.macros.
- Position
- Below the diagonal: jsonschema.macros uses a module listed above it, which is the healthy direction.
39→29 jsonschema.macros uses jsonschema✕
- Connections
- 1 pair of types, where a type in jsonschema.macros uses a type in jsonschema.
- The types involved
pl.iterators.kebs.jsonschema.macros.KebsJsonSchemaMacros→pl.iterators.kebs.jsonschema.JsonSchemaWrapper
- Direction
- jsonschema.macros uses jsonschema, so a change to jsonschema can break jsonschema.macros, while a change to jsonschema.macros can't break jsonschema.
- Position
- Below the diagonal: jsonschema.macros uses a module listed above it, which is the healthy direction.
40→1 slick.KebsSlickSupport uses core.enums✕
- Connections
- 6 pairs of types, where a type in slick.KebsSlickSupport uses a type in core.enums.
- The types involved
pl.iterators.kebs.slick.KebsSlickSupport.KebsEnumImplicits→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.slick.KebsSlickSupport.KebsEnumImplicits→pl.iterators.kebs.core.enums.ValueEnumLikepl.iterators.kebs.slick.KebsSlickSupport.KebsLowercaseEnumImplicits→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.slick.KebsSlickSupport.KebsUppercaseEnumImplicits→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.slick.KebsSlickSupport.SlickEnum→pl.iterators.kebs.core.enums.EnumLikepl.iterators.kebs.slick.KebsSlickSupport.SlickValueEnum→pl.iterators.kebs.core.enums.ValueEnumLike
- Direction
- slick.KebsSlickSupport uses core.enums, so a change to core.enums can break slick.KebsSlickSupport, while a change to slick.KebsSlickSupport can't break core.enums.
- Position
- Below the diagonal: slick.KebsSlickSupport uses a module listed above it, which is the healthy direction.
40→2 slick.KebsSlickSupport uses core.instances✕
- Connections
- 2 pairs of types, where a type in slick.KebsSlickSupport uses a type in core.instances.
- The types involved
pl.iterators.kebs.slick.KebsSlickSupport.KebsInstanceConverterImplicits→pl.iterators.kebs.core.instances.InstanceConverterpl.iterators.kebs.slick.KebsSlickSupport.KebsSeqImplicits→pl.iterators.kebs.core.instances.InstanceConverter
- Direction
- slick.KebsSlickSupport uses core.instances, so a change to core.instances can break slick.KebsSlickSupport, while a change to slick.KebsSlickSupport can't break core.instances.
- Position
- Below the diagonal: slick.KebsSlickSupport uses a module listed above it, which is the healthy direction.
40→3 slick.KebsSlickSupport uses core.macros✕
- Connections
- 2 pairs of types, where a type in slick.KebsSlickSupport uses a type in core.macros.
- The types involved
pl.iterators.kebs.slick.KebsSlickSupport.KebsSeqImplicits→pl.iterators.kebs.core.macros.ValueClassLikepl.iterators.kebs.slick.KebsSlickSupport.KebsValueClassLikeImplicits→pl.iterators.kebs.core.macros.ValueClassLike
- Direction
- slick.KebsSlickSupport uses core.macros, so a change to core.macros can break slick.KebsSlickSupport, while a change to slick.KebsSlickSupport can't break core.macros.
- Position
- Below the diagonal: slick.KebsSlickSupport uses a module listed above it, which is the healthy direction.
40→33 slick.KebsSlickSupport uses slick✕
- Connections
- 1 pair of types, where a type in slick.KebsSlickSupport uses a type in slick.
- The types involved
pl.iterators.kebs.slick.KebsSlickSupport.KebsBasicImplicits→pl.iterators.kebs.slick.KebsColumnExtensionMethods
- Direction
- slick.KebsSlickSupport uses slick, so a change to slick can break slick.KebsSlickSupport, while a change to slick.KebsSlickSupport can't break slick.
- Position
- Below the diagonal: slick.KebsSlickSupport uses a module listed above it, which is the healthy direction.
At a glance — Code Health
At a glance — Architecture
At a glance — Maturity
At a glance — Readiness
At a glance — Security
At a glance — Performance
Security & Compliance — OWASP Top-10 mapping
| OWASP category | Findings | Severity |
|---|---|---|
| A05:2025 — Injection | 26 | High / Critical |
| A03:2025 — Software Supply Chain Failures | 9 | Medium |
Roadmap
Top priorities: Adopt SLF4J (with a Logback or Log4j2 JSON encoder) and log at meaningful points in the modules you run; Add a SAST step to CI running what this repository's stack ships: scalafix or scapegoat — or `semgrep --config=auto`, which runs on any language — so a security regression fails the build instead of landing; Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
| Do this | Helps | Effort | Dimension |
|---|---|---|---|
| Adopt SLF4J (with a Logback or Log4j2 JSON encoder) and log at meaningful points in the modules you run. | +7.5 pts | Medium | Observability |
| Add a SAST step to CI running what this repository's stack ships: scalafix or scapegoat — or `semgrep --config=auto`, which runs on any language — so a security regression fails the build instead of landing. | +6.8 pts | Medium | Security & performance tooling |
| Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them. | +4.5 pts | Medium | Architecture documentation |
| Nothing pauses a release for a human: publish as a draft release (or gate the release job on a protected tag/manual dispatch) so a bad build can be stopped before users can download it. | +3.6 pts | Medium | Deployment & Rollback |
| Resolve the 4 Orphaned file finding(s) in Knowledge Freshness — start with tagged.scala, KebsBaklavaEnumsSchema.scala, KebsHStoreColumnExtensionMethods.scala. | +1.3 pts | Low | Knowledge Freshness |
| Resolve the 4 REDACTED finding(s) in Supply-chain Provenance & Signing — start with REDACTED, REDACTED, REDACTED. | +0.9 pts | Low | Supply-chain Provenance & Signing |
| On Scala 3, add `-Yexplicit-nulls` to `scalacOptions` so `String` and `String | Null` mean different things, and type each Java API's result as nullable where it can return null; on Scala 2 (or as a first step), enable WartRemover's `Null` wart (`wartremoverErrors += Wart.Null`) or Scalafix's `DisableSyntax.noNulls = true` so the code holds absence in `Option`. Then pay the assertions down rather than adding to them: each `.nn` is a null the compiler could not rule out — wrap the Java value in `Option(…)` at the boundary, pattern-match on `null` once there, or change the API so the null cannot arrive; an `unsafeNulls` import switches the checking off for everything after it. | +1.9 pts | Medium | Nullable reference types |
| Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. | +0.6 pts | Low | Static Analysis (SAST) |
File quality
| File | Score | Band | Worst signal |
|---|---|---|---|
| REDACTED | 2.3 | Slop | Static Analysis (SAST): High: REDACTED |
| REDACTED | 2.7 | Slop | Static Analysis (SAST): High: REDACTED |
| REDACTED | 3.7 | Slop | Static Analysis (SAST): High: REDACTED |
| baklava/src/main/scala/pl/iterators/kebs/baklava/schema/KebsBaklavaSchema.scala | 6.0 | Mixed | Explicit Debt: TodoComment |
| core/src/main/scala-2.12/pl/iterators/kebs/core/support/FractionalSupport.scala | 7.4 | Mixed | Code Duplication: Members sharing a duplicated core (6 members, 50+ identical tokens) |
| examples/src/main/scala/pl/iterators/kebs/examples/EnumSprayJsonFormat.scala | 7.4 | Mixed | Code Duplication: Members sharing a duplicated core (4 members, 50+ identical tokens) |
| spray-json/src/main/scala-2/pl/iterators/kebs/sprayjson/KebsSprayJson.scala | 7.8 | Mixed | Code Duplication: Duplicated block (5 lines × 2) |
| REDACTED | 7.9 | Mixed | Supply-chain Provenance & Signing: REDACTED |
| baklava/src/main/scala/pl/iterators/kebs/baklava/schema/enums/KebsBaklavaEnumsSchema.scala | 8.5 | Near-clean | Code Duplication: Duplicated block (6 lines × 3) |
| akka-http/src/main/scala/pl/iterators/kebs/akkahttp/matchers/KebsAkkaHttpMatchers.scala | 8.5 | Near-clean | Code Duplication: Duplicated block (10 lines × 3) |
| akka-http/src/main/scala/pl/iterators/kebs/akkahttp/unmarshallers/KebsAkkaHttpUnmarshallers.scala | 8.5 | Near-clean | Code Duplication: Duplicated block (8 lines × 3) |
| circe/src/main/scala-2/pl/iterators/kebs/circe/KebsCirceMacros.scala | 8.5 | Near-clean | Code Duplication: Duplicated block (6 lines × 2) |
| core/src/main/scala-2.12/pl/iterators/kebs/core/support/NumericSupport.scala | 8.5 | Near-clean | Code Duplication: Duplicated block (7 lines × 3) |
| examples/src/main/scala/pl/iterators/kebs/examples/SprayJsonWithPekkoHttpExample.scala | 8.5 | Near-clean | Code Duplication: Duplicated block (12 lines × 2) |
| examples/src/main/scala/pl/iterators/kebs/examples/CirceExample.scala | 8.5 | Near-clean | Code Duplication: Duplicated block (8 lines × 2) |
How the grades work
A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.
Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.
Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.
Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.
Methodology & how to trust this report
This survey is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. All 59 evaluated dimensions are computed by tools and static analysis; no language model sets or judges any of them. Overall confidence is 0.8, the weighted average across measured dimensions.
What we checked — 59 dimensions across the health lenses
- Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 54 of 67 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line.
- Is there a tool behind the number? Every score below names the method that produced it: Roslyn, git or a scanner, not a narrative.
- Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.
Tools & methods
| Method | Backs | Version | Evaluator |
|---|---|---|---|
| Roslyn static analysis | Complexity, cohesion, coupling, dead code, API surface, layering | 5.3.0 | ✓ deterministic |
| Native secret scanner | Hardcoded secrets / credentials | 1.0.0 | ✓ deterministic |
| Canine Code Analyzer duplication detector (in-process) | Code duplication | 1.0.0 | ✓ deterministic |
| Coverage (coverlet / dotnet-coverage) | Line & branch coverage | 10.0.400 | ✓ deterministic |
| NuGet / dotnet | Outdated, vulnerable & deprecated dependencies | 10.0.400 | ✓ deterministic |
| git / LibGit2Sharp | Churn hotspots, knowledge concentration, history | 2.43.0 · 0.31.0 | ✓ deterministic |
| gitleaks · semgrep · trivy | Secrets in history, SAST, CVEs, IaC & container, PII / GDPR | 1.86.0 · 0.69.3 | ✓ deterministic |
Run transparency — what happened this run
- D8 Code Coverage — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Coverage NOT MEASURED: test source is present (.scala) but the built-in coverage collector has no runner for this repository's ecosystem — so this suite was never executed by it. Not scored — this is a gap in the analyzer's language coverage, not a defect in the repo. To have real coverage read, produce a coverage report in a standard format (`addSbtPlugin("org.scoverage" % "sbt-scoverage" % "<version>")` in `project/plugins.sbt`, then `sbt clean coverage test coverageReport`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures. You can widen what we reach: optional: produce a coverage report in a standard format (`addSbtPlugin("org.scoverage" % "sbt-scoverage" % "<version>")` in `project/plugins.sbt`, then `sbt clean coverage test coverageReport`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures — then the real number is read on the next scan.
- D11 Test Reliability — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Test source is present (.scala) and this repository declares an sbt build (repository root, 115 test files), but it was not re-run: the analyzer environment could not run it. Not scored — this is a gap in the analyzer's language coverage, not a finding about this repository.
- D12 Dependency Hygiene — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This repository's dependency manifests WERE read and their pinning discipline assessed; what went unanswered is the currency half, because repo1.maven.org — the registry that answers it — was asked and did not reply (HTTP 429 Too Many Requests from http://172.31.7.1:8790/maven/com/spotify/magnolify-scalacheck/maven-metadata.xml). This is OUR side and it is an ENVIRONMENT fault, not a missing collector: the collector exists and ran. An HTTP 403 here is what this scan's egress allowlist returns for a host that is not on it, so the remedy is to add repo1.maven.org to the allowlist and re-run — not to build anything.
- D21 Naming Consistency — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D21's deterministic naming rules are gated on C# first (docs/plans/deterministic-engine.md, P5): each other language is switched on only after its own concept suite and A/B gate pass. Until then its declarations carry no naming verdict this run — this says nothing about whether its names are consistent.
- D22 Internal API Consistency — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D22 identifies the intentionally-exposed surface from `IsPackable` and `.Contracts` project names, MSBuild conventions read off the loaded project set. This target exposed no such projects, so the probe never ran; this says nothing about whether the repository has a public API. This repository commits no C#/VB source at all, so there was never an MSBuild project set to read these conventions off. That is OUR side and it is an ADMISSION gap, not an environment fault: it declares a published package (build.sbt), but no published-package marker D22 reads admitted any project here. D22 DOES collect the public API of every language in this tree, and admits a project only when its manifest makes that ecosystem's publication act in a form the marker recognises — so what is missing is not a collector but an admission rule for the publication act this repository makes, if it makes one. The remedy is a better discriminator for that marker — not a collector, and no change to the scan image can close it. The marker's rules are measured to refuse applications, so one refused repository is the rule working as calibrated; several are the evidence that it is too strict. For npm the surface is what a published package.json's entry points (exports, main, module, types) export, followed through the source; an entry that names build output the tree does not commit (dist/, build/) is not followed back to source, because only a tsconfig outDir/rootDir pair states that mapping and a bundler's input lives in executable configuration this engine does not evaluate.
- D24 Comment Value — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Each source language's comment syntax, and the code a comment annotates in it, needs its own proof before D24 judges it. Until then those comments are left unread, not counted as clean.
- D27 Navigability — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Navigability is taken over call sites whose callee resolved. For C# that population includes calls into referenced assemblies; for this language only calls declared inside the repository count, so the abstention threshold reads the repository's use of its standard library as a resolution failure. That is a limit of this analyzer, not a build problem in this repository.
- D32 Data Compliance (PII/GDPR) — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. `opaque/src/main/scala-3/pl/iterators/kebs/opaque/Opaque.scala`, `scalacheck/src/main/scala-3/pl/iterators/kebs/scalacheck/ScalacheckInstancesSupport.scala`, `website/docusaurus.config.ts` produced a parse error, so every rule in this engine's `gdpr.yml` was absent there. That absence is NOT a clean result: these rules detect personal data crossing a boundary into a log sink, a URL or browser storage, and a file that was never parsed cannot report any of the three. The rest of the tree analysed normally and its rows above stand; only these files are unaccounted for. You can widen what we reach: fix the syntax error (or exclude the file deliberately) and re-scan to cover it.
- D44 Platform End-of-Life — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This dimension reads a project's own statement about the platform it runs on: a TargetFramework in a .NET project file, a .nvmrc or .python-version, a capped requires-python, a Rust toolchain file or Cargo.toml rust-version, a .go-version, .java-version, .ruby-version, .tool-versions or .sdkmanrc, a go.mod go directive, a Maven or Gradle Java level or toolchain, a Gemfile's ruby directive, a mix.exs elixir requirement, a rebar.config minimum_otp_vsn, a pubspec.yaml SDK constraint, a build.sbt scalaVersion, or a framework major pinned by a dependency constraint. This repository carries none of them, so nothing about its platform was established. That is a gap in this analyzer's coverage, NOT a finding that the platform is supported — a language whose runtime is declared elsewhere (Package.swift, a Dockerfile) is simply not read here yet.
- AXB2 Runtime readiness — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. `npm run` found no package.json in the folder where our sandbox ran it. This is a limit of our sandbox, not of your repository. (rule: no-root-manifest). The renderer reported: the dev server (`npm run start`) exited before it served a page. Likely cause (our sandbox): `npm run` found no package.json in the folder where our sandbox ran it. This is a limit of our sandbox, not of your repository. Last output: "npm error code ENOENT / npm error syscall open / npm error path <repo>/package.json / npm error errno -2 / npm error enoent Could not read package.json: Error: ENOENT: no such file or directory, open '<repo>/package.json' / npm error enoent This is related to npm not being able to find a file. / npm error enoent / npm error A complete log of this run can be found in: <path>" No runtime evidence was gathered.
- AXR1 Runtime accessibility — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Render strategy: boot via DevServer (start). the dev server (`npm run start`) exited before it served a page. Likely cause (our sandbox): `npm run` found no package.json in the folder where our sandbox ran it. This is a limit of our sandbox, not of your repository. Last output: "npm error code ENOENT / npm error syscall open / npm error path <repo>/package.json / npm error errno -2 / npm error enoent Could not read package.json: Error: ENOENT: no such file or directory, open '<repo>/package.json' / npm error enoent This is related to npm not being able to find a file. / npm error enoent / npm error A complete log of this run can be found in: <path>" No runtime evidence was gathered.
- C1 Data Protection — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These personal data controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks personal data controls.
- C2 Access Controls — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These authorization controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks authorization controls.
- C3 Audit Trail — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 'slick' is imported (slick/src/main/scala/pl/iterators/kebs/slick/KebsSlickSupport.scala:7), but no entity, schema, table or model declaration this check reads was found beside it, so whether personal data is stored could not be decided.
- C4 Data Retention — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 'slick' is imported (slick/src/main/scala/pl/iterators/kebs/slick/KebsSlickSupport.scala:7), but no entity, schema, table or model declaration this check reads was found beside it, so whether personal data is stored could not be decided.
- C5 Data-Subject Rights — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 'slick' is imported (slick/src/main/scala/pl/iterators/kebs/slick/KebsSlickSupport.scala:7), but no entity, schema, table or model declaration this check reads was found beside it, so whether personal data is stored could not be decided.
Limitations & what we did not check
We assess the repository exactly as committed, and only the repository. By design we do not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.
Per-dimension blind spots
- D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
- D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
- D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
- D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
- D5 Coupling: Coupling is measured between projects/assemblies — runtime coupling through DI, reflection, messaging or shared databases is invisible to a static reference graph.
- D6 Cohesion (LCOM4): LCOM4 cohesion is syntactic — it infers connectivity from which methods touch which fields/methods by name, not from real runtime behaviour or intent.
- D9 Test Distribution: The test-pyramid shape is inferred from project/folder naming and references, with a single test host bucketed per-file by its path tier and content signals — a suite that names tiers unconventionally and gives no per-file signal can still be mis-bucketed.
- D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
- D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
- D16 Bus Factor: Bus-factor is a time-decayed model of commit attribution (who has recently, repeatedly worked a file), not comprehension — pairing, review and reading-without-committing spread knowledge it can't see; bot commits and shared accounts still distort it.
- D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
- D19 Documentation Quality: Documentation quality publishes two things only: a runnable or packaged unit with no example, and a multi-project root README that maps none of its parts. It does not judge clarity, and its other checks (overview, licence, boilerplate, structure, empty sections, XML-doc coverage) are withheld after adjudication: their candidates are counted in the card's gaps, not shown as rows. A false statement in a document is M4's; units are .NET projects only.
- D26 Project Cohesion: Project focus is sized from members/namespaces per project — a project that is broad by deliberate design reads the same as one that has sprawled.
- D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
- D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
- D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
- D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
- D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
- D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
- AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
- P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".
- P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.
Dimensions
D1 · Cyclomatic Complexity
0 method(s) exceeded the cyclomatic complexity threshold of 15.
D2 · Cognitive Complexity
0 method(s) exceeded the cognitive complexity threshold of 15.
D3 · God Classes
0 god class(es) detected.
D4 · Code Duplication
15 duplicated block group(s) detected. A further 2 rows report members as variants of one another; they aggregate block groups already counted above and are not themselves counted. 5 of the 17 are in trees this repository does not ship — vendored, example/demo, project-template, fixture and benchmark code — and are ranked below the shipped groups rather than excluded from them: the duplication there is real and is still counted in this dimension's score. The dimensions that publish a production-file census leave those trees out of theirs, so this count is deliberately drawn over the wider population.
What to do
- Resolve the 3 Duplicated block (5 lines × 2) finding(s) in Code Duplication — start with KebsSprayJson.scala (2), KebsBaklavaSchema.scala. — One of this dimension's main actionable groups (3 warning-level).
- Resolve the 2 Duplicated block (6 lines × 2) finding(s) in Code Duplication — start with KebsBaklavaSchema.scala, KebsCirceMacros.scala. — One of this dimension's main actionable groups (2 warning-level).
- Resolve the 1 Members sharing a duplicated core (6 members, 50+ identical tokens) finding(s) in Code Duplication — start with FractionalSupport.scala. — One of this dimension's main actionable groups (1 warning-level).
- Enforce Code Duplication in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Verified — provenance only; does not change the score.
D5 · Coupling
21 production modules (sbt), 0 dependency cycle(s), 0 unstable depended-on module(s). Read from the build's own module declarations; a dependsOn spread (deps: _*) and a project whose directory a helper computes are not visible there; 3 module(s) off the main sequence, with abstractness counted on 20 of the 21 (the rest declare no modelled class or interface, export only macros, declare types in source no model reads, or have no source directory of their own).
What to do
- Resolve the 3 Off the main sequence finding(s) in Coupling. — One of this dimension's main actionable groups (3 warning-level).
- Enforce Coupling in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.
D6 · Cohesion (LCOM4)
0 of 6 classes have LCOM4 above 3.
D9 · Test Distribution
531 test methods: 531 unit, 0 integration, 0 BDD, 0 e2e. The Scala suite contributes 531 test case(s) across 77 file(s) in a test source set declaring at least one — every `test("…")`, `it("…")`, `property("…")` and `"…" in {…}` registration and every JUnit `@Test`, which is how munit, ScalaTest, utest, ZIO Test and specs2 declare a case; a case registered under a computed name is not counted, so this is a floor. Its tier split is INFERRED from paths and file names, except sbt's src/it source set, which the build declares.
D13 · Secret Scanning
Secret scan ran and found no leaked secrets.
D15 · Churn × Complexity Hotspots
No churn × complexity hotspots in the window.
D16 · Bus Factor
No source file's living knowledge is concentrated in a single author. Counted over 21 of the 128 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.
D17 · Explicit Debt
1 deducted task-comment markers across 4480 LoC (0.0/KLoC) → score 10.0. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.
What to do
- Resolve the 1 TodoComment finding(s) in Explicit Debt — start with KebsBaklavaSchema.scala. — One of this dimension's main actionable groups (1 warning-level).
- Enforce Explicit Debt in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.
D19 · Documentation Quality
1 of 1 documentation facets pass in full. 19 document(s) read across 2 unit(s).
D26 · Project Cohesion
0 of 2 build units (npm, sbt) flagged as possibly oversized/incoherent.
D28 · Secrets (history)
gitleaks scanned the full history AND the current working tree and found no secrets.
D29 · Static Analysis (SAST)
26 finding(s): 0 critical, 26 high, 0 medium, 0 low. 24 unpinned-GitHub-Actions row(s) are reported here but scored by D36 (supply-chain provenance), which measures that posture as `pinned_actions` — one pinning decision is charged once, not once per lens. semgrep hit a parse error in 2 file(s) — `opaque/src/main/scala-3/pl/iterators/kebs/opaque/Opaque.scala`, `website/docusaurus.config.ts` (line 65, line 134) — so no absence of findings in the named regions is evidence of anything; rows reported elsewhere in those files are real. Fix the syntax error (or exclude the file deliberately) and re-scan to cover them. Separately, one or more rules could not re-parse an embedded snippet in 1 file(s) (e.g. a workflow `run:` block read as shell). Those files WERE scanned and their other rows are unaffected; only those rules' view of those snippets is missing.
What to do
- Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
- Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
- No action in Static Analysis (SAST) — all 24 REDACTED finding(s) are reported here at file:line but scored by D36 (supply-chain provenance), so none is charged to this dimension. — One of this dimension's main actionable groups (24 issue-level, 0 of them charged here).
D30 · Dependency Vulnerabilities
No known-vulnerable dependencies in any ecosystem this repository declares.
D34 · Knowledge Freshness
4 of 21 significant source file(s) are orphaned — their living knowledge has decayed to nothing, so no one currently understands them. The largest is tagged-meta/shared/src/main/scala/pl/iterators/kebs/tag/meta/tagged.scala. Counted over 21 of the 128 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.
What to do
- Resolve the 4 Orphaned file finding(s) in Knowledge Freshness — start with tagged.scala, KebsBaklavaEnumsSchema.scala, KebsHStoreColumnExtensionMethods.scala. — One of this dimension's main actionable groups (4 recommendation-level).
- Resolve the 1 Orphaned files with no living knowledge finding(s) in Knowledge Freshness. — One of this dimension's main actionable groups (1 recommendation-level).
D35 · Change Coupling
No strong hidden change-coupling between production files.
D36 · Supply-chain Provenance & Signing
1/4 supply-chain integrity signals present (provenance, signing, SBOM, pinned actions).
What to do
- Resolve the 4 REDACTED finding(s) in Supply-chain Provenance & Signing — start with REDACTED, REDACTED, REDACTED. — One of this dimension's main actionable groups (4 warning-level).
- Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 warning-level).
D43 · Malicious Dependencies
No dependency in any ecosystem this repository declares is published as malicious.
Frontend & cross-cutting dimensions
AX10 · Code composition
What to do
- The domain core is a small share of production code, but most of the rest matched no layer vocabulary at all — so this is not yet an anemic-domain finding. The namespace/path convention could not place that code, which makes the composition above a statement about the naming, not about the design. Name the layers (or check that the repository's conventions differ from the ones this check knows) before reading a thin domain into it.
AX2 · Stateful singletons
AX3 · Project dependency cycles
AX4 · Dependency direction
AX6 · Interface segregation
GD1 · Unfinished & placeholder code
IC1 · Incompleteness & stubs
M1 · Documentation (README)
What to do
- Explain in the README how to run the tests. Add a section called Testing to the README in the repository's top folder, saying how to run the test suite.
- Add an 'Architecture' / 'How it works' section to the root README — the high-level shape.
M2 · Architecture documentation
- No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
- No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.
What to do
- Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
- Add a C4 context/container diagram (Structurizr, PlantUML or Mermaid) or an architecture.md overview.
M3 · Folder & project structure
P1 · CI/CD gates
P10 · Library API & versioning
P2 · Observability
- No logging call was found in the 129 JVM, JavaScript/TypeScript production file(s) this check read across 2 module(s). Each was searched for its ecosystem's logging libraries (JVM: SLF4J, Log4j2, java.util.logging, Logback, kotlin-logging, scala-logging; JavaScript/TypeScript: pino, winston, bunyan, log4js, loglevel, consola, the NestJS Logger) and for a call on a receiver named `log`/`logger` (or ending in `Logger`/`_logger`) with a level verb. It cannot see logging through a repo-local wrapper named otherwise, or in source it did not read — this is 'no logging found by this walk', not a verdict that nothing here logs. If it is right, production issues will be hard to diagnose.
What to do
- Adopt SLF4J (with a Logback or Log4j2 JSON encoder) and log at meaningful points in the modules you run.
- Consider OpenTelemetry tracing/metrics (opentelemetry-java or Micrometer) and a health-check endpoint (Spring Boot Actuator's /actuator/health, or a /health route) for operability.
P3 · Security & performance tooling
- No static application security testing detected. For this repository's stack, add scalafix or scapegoat (or `semgrep --config=auto`, which runs on any language) as a CI step. What was searched, so you can tell an absence from a miss: the 13271 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner. — REDACTED:11
- `website/package.json` declares packages, and nothing in the repository keeps them current: no Dependabot or Renovate configuration that schedules updates, and no dependency-review gate on pull requests. A pinned dependency stays at the version it was added at until someone notices — including after an advisory is published against it. Add a `.github/dependabot.yml` with one `package-ecosystem` entry per ecosystem the tree uses (or an enabled `renovate.json`), and gate pull requests with `actions/dependency-review-action`. — website/package.json:18
What to do
- Add a SAST step to CI running what this repository's stack ships: scalafix or scapegoat — or `semgrep --config=auto`, which runs on any language — so a security regression fails the build instead of landing.
- Enable Dependabot/Renovate or a dependency-review gate.
- Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
P4 · Deployment & Rollback
What to do
- Nothing pauses a release for a human: publish as a draft release (or gate the release job on a protected tag/manual dispatch) so a bad build can be stopped before users can download it.
P6 · Release Hygiene
PF3 · Async & latency hygiene
X1 · Async correctness
X12 · Unreachable branch
X13 · Undrained process stream
X14 · Bypassable address classification
X15 · Unvalidated length from an untrusted reader
X16 · Unfloored truncation loop
X17 · Uncapped recursion over a caller-supplied document
X18 · Disposal-pattern correctness
X19 · Unrestored process-global state
X20 · Mistyped argument guard
X21 · Side-effecting pattern guard
X22 · Contradicted release guard
X23 · Unguarded diagnostic materialisation
X24 · Document value interpolated into markup unescaped
X25 · Inert configuration knob
X26 · Unsynchronised callback handoff
X27 · Collection changed while being enumerated
X28 · Index access outside its own emptiness guard
X29 · Per-element action decided by a fixed element
X3 · Exception handling
X30 · Support guard that admits what it rejects
X5 · Nullable reference types
- No build over this repository's 126 Scala product file(s) passes `-Yexplicit-nulls`, enables WartRemover's `Null` wart or runs Scalafix's `DisableSyntax.noNulls`, so every reference type admits null and nothing reports a `null` written into the code or returned from a Java API — the first one to reach a method call is a `NullPointerException`. `Option` by convention is a habit no tool here holds the code to.
What to do
- On Scala 3, add `-Yexplicit-nulls` to `scalacOptions` so `String` and `String | Null` mean different things, and type each Java API's result as nullable where it can return null; on Scala 2 (or as a first step), enable WartRemover's `Null` wart (`wartremoverErrors += Wart.Null`) or Scalafix's `DisableSyntax.noNulls = true` so the code holds absence in `Option`. Then pay the assertions down rather than adding to them: each `.nn` is a null the compiler could not rule out — wrap the Java value in `Option(…)` at the boundary, pattern-match on `null` once there, or change the API so the null cannot arrive; an `unsafeNulls` import switches the checking off for everything after it.
Reference — by lens
| Lens | Score | Rating | Impact |
|---|---|---|---|
| Code Health | 75% | Adequate — gated by X5 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Architecture | 99% | Exemplary | Solid. |
| Maturity | 59% | Adequate — gated by M2 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Readiness | 46% | Weak — gated by P2, P3 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Security | 65% | Checked 3 of 9 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Performance | 100% | Exemplary | Strongest area. |
Not evidenced — 4 control(s) we could not find positive evidence for
- C3 Audit Trail — Not assessed: this repository stores data through 'slick' (slick/src/main/scala/pl/iterators/kebs/slick/KebsSlickSupport.scala:7) but declares no persisted model this check reads (Slick table columns, CREATE TABLE and ALTER TABLE … ADD columns in SQL migrations). Personal data may be written through raw SQL or a hosted backend, so whether its changes need an audit trail could not be established, and the trail's absence is not scored.
- C4 Data Retention — Not assessed: this repository stores data through 'slick' (slick/src/main/scala/pl/iterators/kebs/slick/KebsSlickSupport.scala:7) but declares no persisted model this check reads (Slick table columns, CREATE TABLE and ALTER TABLE … ADD columns in SQL migrations). Personal data may be written through raw SQL or a hosted backend, so whether a retention limit applies here could not be established, and its absence is not scored.
- C5 Data-Subject Rights — Not assessed: this repository stores data through 'slick' (slick/src/main/scala/pl/iterators/kebs/slick/KebsSlickSupport.scala:7) but declares no persisted model this check reads (Slick table columns, CREATE TABLE and ALTER TABLE … ADD columns in SQL migrations). Personal data may be written through raw SQL or a hosted backend, so whether data-subject rights apply here could not be established, and their absence is not scored.
- P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
Not included — 58 check(s) not relevant to this codebase
- AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
- AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
- AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
- AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
- AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
- AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
- AC7 A11y enforcement — No web markup found — accessibility is not applicable to this repository.
- AX1 Captive dependencies — Not applicable: this repository's Scala imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's.
- AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX7 Slice cohesion — not applicable — not a vertical-slice architecture
- AX8 Test isolation — no test/production split to check
- AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
- AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- AXR1 Runtime accessibility — the dev server (`npm run start`) exited before it served a page. Likely cause (our sandbox): `npm run` found no package.json in the folder where our sandbox ran it. This is a limit of our sandbox, not of your repository. Last output: "npm error code ENOENT / npm error syscall open / npm error path <repo>/package.json / npm error errno -2 / npm error enoent Could not read package.json: Error: ENOENT: no such file or directory, open '<repo>/package.json' / npm error enoent This is related to npm not being able to find a file. / npm error enoent / npm error A complete log of this run can be found in: <path>" No runtime evidence was gathered. This is a statement about this run, not a statement about your application: nothing here says the surface is inaccessible, only that it was never rendered.
- C1 Data Protection — Not assessed: these personal data controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks personal data controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C2 Access Controls — Not assessed: these authorization controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks authorization controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- D10 Test Quality — ~6851 lines of test source are present (.scala) but no test cases reached the test census for this repository — no test root we could resolve declared them, or the files we read declare no cases in a test framework we recognise — so skipped/assertion-free tests couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
- D11 Test Reliability — Test reliability not included — the .scala suite was found but not re-run
- D12 Dependency Hygiene — Dependency currency not established — repo1.maven.org did not answer
- D14 License Compliance — Not scored — this repository's 1 pinned sbt dependency coordinate(s) were read from its 1 sbt build file(s), but Maven Central could not be asked for the licence of 1 of them (HTTP 429 Too Many Requests from http://172.31.7.1:8790/maven/com/spotify/magnolify-scalacheck/0.9.5/magnolify-scalacheck-0.9.5.pom), and a licence verdict over part of a dependency graph is not a licence verdict. Nothing is asserted about this repository's licensing in either direction.
- D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
- D20 ADR Quality — N/A — ADRs are expected on deployable products with a user-facing host, not consumed libraries; no ADR log is required here.
- D21 Naming Consistency — Naming consistency is measured on C# and TypeScript only; Scala not measured.
- D22 Internal API Consistency — The exposed public-API surface could not be collected — no C#/VB projects loaded.
- D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ sibling projects each declaring an entity of their own or taking another project's integration events. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
- D24 Comment Value — D24 reads C#, Visual Basic, TypeScript and JavaScript comments only; comments in this repository's .scala source were not judged.
- D25 ADR Conformance — no ADRs to check
- D27 Navigability — D27 counts a call into the standard library or a dependency as unresolved for this repository's language (.scala), so too few call sites counted as resolved to assess navigability. Not scored: this is a gap in the analyzer, not a verdict about this repository.
- D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.
- D32 Data Compliance (PII/GDPR) — 3 file(s) were not parsed by semgrep — the PII/GDPR ruleset never ran over them
- D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
- D39 IL Efficiency — D39 measures the IL emitted by a .NET build; this repository has no .NET solution or project files, so the dimension does not apply.
- D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
- D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
- D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
- D44 Platform End-of-Life — Platform end-of-life not assessed — this repository declares no platform this pass reads
- D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
- D8 Code Coverage — Coverage not included — suite not readable by the collector
- DM1 Domain Modelling — applicable but not scored (3 signals for this style, 2 needed — the count is met but a required primary signal is absent): 4 strongly-typed id(s); 129 value object(s); 8 domain event(s); its domain events are published by services or handlers — no domain entity raises one; no aggregate is declared and no domain structure surrounds the state-guarding types: not claimed as DDD
- ED1 Event-Driven — not scored — this repository shows none of the 3 signals this lens looks for
- ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
- ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
- M4 Documentation accuracy — Not applicable: the 19 current-state document(s) make no claim of a kind M4 checks. 3 claim(s) of kinds M4 does not check were not checked (command argument 2, environment variable 1); M4 checks only links and versions and artefact counts.
- P12 CI test-gate honesty — Reported, not scored — and nothing was matched here. The coverage check applies to any stack, and the automatic-re-run check to any GitHub-Actions workflow, but the checks for excluded tests, skipped tests and sleep-based synchronisation currently recognise only some ecosystems' test-runner idioms, so on a repository built with another stack the zeros below mean 'not checked', not 'clean'.
- P7 Outbound HTTP resilience — not applicable — no HTTP server, API framework or worker entry point was found in the JVM, JavaScript/TypeScript source, so there is no service whose uptime a failing dependency could take down
- P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
- P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (`addSbtPlugin("org.scoverage" % "sbt-scoverage" % "<version>")` in `project/plugins.sbt`, then `sbt clean coverage test coverageReport`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures, or wire coverage collection into CI, to enable this cross-layer check
- PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for `@Benchmark` in a Java, Kotlin or Scala file importing JMH or kotlinx-benchmark, Jetpack Benchmark's `measureRepeated` in a file importing androidx.benchmark, or JMH/kotlinx-benchmark/androidx.benchmark in a pom.xml, Gradle or sbt build, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
- PF2 Allocation hygiene — Not scored: this check counted allocation-aware idioms (Span, pools, stackalloc) per line, which describes what kind of code a repository is rather than whether it has an allocation problem, so it was withdrawn. Nothing here is a finding about your code.
- S1 Web-Security Posture — No web surface: 126 Scala file(s) were read for weak hashes and ciphers, key material fixed in the source, disabled TLS certificate validation and obsolete TLS versions, and none was found. This repository builds on an HTTP-server library (akka-http/src/main/scala/pl/iterators/kebs/akkahttp/matchers/KebsAkkaHttpMatchers.scala:3 — `akka.http.scaladsl.server`) but serves no HTTP of its own: its production source starts no server (no `newServerAt`/`bindAndHandle`, server builder, `Server.serve`, `Http.serve`, tapir server interpreter or Netty HTTP pipeline), declares no application one runs (no Play application, servlet, cask `MainRoutes`, `HttpApp` or twitter-server), so it is a library whose server controls belong to the application that serves it — HTTPS enforcement, HSTS, cookie flags and input validation are N/A here, as they are for a C# library. If this codebase starts serving HTTP, the dimension reactivates automatically.
- SC1 Supply-chain hygiene — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X10 Duplicated predicate — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X2 Cancellation propagation — no C# was loaded; this repository's Scala was read, and no request in it can be cancelled by a caller — a Scala request takes no token: a Future cannot be cancelled, and cats-effect, ZIO and Monix interrupt the fiber that made the request from outside the call, not through a parameter
- X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
- X4 Structured logging — This check asks whether log calls keep a message's values apart from its text, which needs a logger that can carry them as fields. This repository's Scala was read, and it logs through none that an interpolated message defeats: scala-logging takes an `s"…"` message apart into SLF4J's pattern and arguments at compile time, and log4s, grizzled-slf4j, Play's Logger, Akka's LoggingAdapter, sbt's Logger and Spark's Logging take one finished message (as log4net does in C#). Calls made straight through SLF4J (`org.slf4j.Logger`) would be judged.
- X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X7 Silent fallback defaults — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Appendix A — Findings (grouped)
Critical — 26 finding(s)
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
Serious — 28 finding(s)
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- Duplicated block (5 lines × 2) baklava/src/main/scala/pl/iterators/kebs/baklava/schema/KebsBaklavaSchema.scala:16
- Duplicated block (5 lines × 2) spray-json/src/main/scala-2/pl/iterators/kebs/sprayjson/KebsSprayJson.scala:10
- Duplicated block (5 lines × 2) spray-json/src/main/scala-2/pl/iterators/kebs/sprayjson/KebsSprayJson.scala:15
- Off the main sequence: core
- Off the main sequence: instances
- Off the main sequence: enumSupport
- Duplicated block (6 lines × 2) baklava/src/main/scala/pl/iterators/kebs/baklava/schema/KebsBaklavaSchema.scala:19
- Duplicated block (6 lines × 2) circe/src/main/scala-2/pl/iterators/kebs/circe/KebsCirceMacros.scala:88
- TodoComment baklava/src/main/scala/pl/iterators/kebs/baklava/schema/KebsBaklavaSchema.scala:16
- REDACTED
- REDACTED
- Members sharing a duplicated core (6 members, 50+ identical tokens) core/src/main/scala-2.12/pl/iterators/kebs/core/support/FractionalSupport.scala:10
- Duplicated block (6 lines × 3) baklava/src/main/scala/pl/iterators/kebs/baklava/schema/enums/KebsBaklavaEnumsSchema.scala:10
- Duplicated block (10 lines × 3) akka-http/src/main/scala/pl/iterators/kebs/akkahttp/matchers/KebsAkkaHttpMatchers.scala:10
- Duplicated block (8 lines × 3) akka-http/src/main/scala/pl/iterators/kebs/akkahttp/unmarshallers/KebsAkkaHttpUnmarshallers.scala:11
- Duplicated block (5 lines × 6) core/src/main/scala-2.12/pl/iterators/kebs/core/support/FractionalSupport.scala:12
- Duplicated block (6 lines × 6) core/src/main/scala-2.12/pl/iterators/kebs/core/support/FractionalSupport.scala:17
- Duplicated block (7 lines × 3) core/src/main/scala-2.12/pl/iterators/kebs/core/support/NumericSupport.scala:10
- Members sharing a duplicated core (4 members, 50+ identical tokens) examples/src/main/scala/pl/iterators/kebs/examples/EnumSprayJsonFormat.scala:81
- Duplicated block (12 lines × 2) examples/src/main/scala/pl/iterators/kebs/examples/SprayJsonWithPekkoHttpExample.scala:152
- Duplicated block (9 lines × 2) examples/src/main/scala/pl/iterators/kebs/examples/EnumSprayJsonFormat.scala:89
- Duplicated block (8 lines × 4) examples/src/main/scala/pl/iterators/kebs/examples/EnumSprayJsonFormat.scala:81
- Duplicated block (8 lines × 2) examples/src/main/scala/pl/iterators/kebs/examples/CirceExample.scala:53
- No structured logging
Minor — 13 finding(s)
- Orphaned file tagged-meta/shared/src/main/scala/pl/iterators/kebs/tag/meta/tagged.scala:1
- Orphaned file baklava/src/main/scala/pl/iterators/kebs/baklava/schema/enums/KebsBaklavaEnumsSchema.scala:1
- Orphaned file slick/src/main/scala/pl/iterators/kebs/slick/hstore/KebsHStoreColumnExtensionMethods.scala:1
- Orphaned file scalacheck/src/main/scala/pl/iterators/kebs/scalacheck/KebsArbitrarySupport.scala:1
- Orphaned files with no living knowledge
- REDACTED
- REDACTED
- REDACTED
- No ADRs
- No architecture diagram/doc
- No SAST REDACTED:11
- No dependency-update automation website/package.json:18
- Scala's null is not held to the type system everywhere
Appendix B — Reproduction & audit trail
| Dimension | Tool | Version | Command | Findings | Raw output |
|---|---|---|---|---|---|
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-880f1a6fbeca494e812c05d43d5aa887/history.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-880f1a6fbeca494e812c05d43d5aa887/tree.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-tree.json |
| D29 · Static Analysis (SAST) | semgrep | — | semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/canine-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off --exclude *.arrow --exclude *.avro --exclude *.csv --exclude *.dat --exclude *.db --exclude *.feather --exclude *.geojson --exclude *.h5 --exclude *.hdf5 --exclude *.jsonl --exclude *.log --exclude *.ndjson --exclude *.npy --exclude *.npz --exclude *.orc --exclude *.parquet --exclude *.pickle --exclude *.pkl --exclude *.psv --exclude *.sqlite --exclude *.sqlite3 --exclude *.tfrecord --exclude *.tsv --exclude *.txt . | 26 | artifacts/raw/semgrep.json |
| D30 · Dependency Vulnerabilities | trivy | — | trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs **/bin/** --skip-dirs **/obj/** . --skip-db-update | 0 | artifacts/raw/trivy-fs.json |
| D31 · IaC & Container Security | trivy | — | trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan. | 0 | — |
| D32 · Data Compliance (PII/GDPR) | semgrep | — | semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that. semgrep could not parse 3 file(s) — `opaque/src/main/scala-3/pl/iterators/kebs/opaque/Opaque.scala`, `scalacheck/src/main/scala-3/pl/iterators/kebs/scalacheck/ScalacheckInstancesSupport.scala`, `website/docusaurus.config.ts` — so the PII/GDPR sweep did not cover the unparsed regions of them; rows reported elsewhere in those files are real. | 0 | — |
| D37 · Vulnerability-disclosure Policy | disclosure | — | disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed. | 0 | — |
| D40 · Network Egress Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here. | 0 | — |
| D41 · Kernel & Syscall Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here. | 0 | — |
| D42 · Runtime Threat Enforcement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here. | 0 | — |
| D43 · Malicious Dependencies | trivy | — | trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs **/bin/** --skip-dirs **/obj/** . --skip-db-update | 0 | artifacts/raw/trivy-fs.json |