Executive summary
scala/scala-swing falls short of our standard for production because we found no logging, tracing or health checks in the code and no automated security scanning of the code, its secrets or its dependencies. It scores 48 out of 100 and is rated Weak, and all eight of its critical findings are security problems in the build pipeline.
Production Readiness, at 36, is the weakest lens and counts most in the score. The best first steps are adding a diagnostic log and adding automated security scanning, each worth about 8 points. Raising Production Readiness to 70 would lift the score to about 58.
Eight pipeline tools are referenced by a changeable name, so the build pipeline can be tampered with. Pinning each tool to an exact version would close this risk.
The product code is 10,179 lines, about €9,400 to rebuild.
If Production Readiness rose from 36 to 70, the lowest score rated Strong, the score would rise from 48 to about 58.
Fixed since the last survey: 2 findings
- Static Analysis (SAST) · Medium: REDACTED examples/target/scala-3.3.8/classes/scala/swing/examples/tutorials/TextSamplerDemoHelp.html
- Static Analysis (SAST) · Medium: REDACTED examples/target/scala-3.3.8/classes/scala/swing/examples/tutorials/TextSamplerDemoHelp.html
Rebuild cost: about €9,400 · Estimate
| Cost to rebuild | €3,100 to €16,000, for 52 to 164 hours of work, under 0.1 person-years for one engineer |
|---|---|
| Difficulty of the problem | Standard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write. |
| Quality factor | ×0.7 at a score of 48. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it. |
| Size | Small: 10,179 lines of product code |
| What it is not | Not a quotation: nobody has offered to build it for that. Not a valuation: it says nothing about what the business is worth. Not a certified figure: no professional has signed it as one. |
Top priorities
Diagnosis: what the measurements show together
Architecture — module dependency graph
Architecture: which parts of the code depend on which
| uses → | 1 scala | 2 scala.swing.BorderPanel | 3 scala.swing.ComboBox.BuiltInEditor | 4 scala.swing.DesktopPane | 5 scala.swing.Dialog | 6 scala.swing.FileChooser | 7 scala.swing.FlowPanel | 8 scala.swing.Font | 9 scala.swing.FormattedTextField | 10 scala.swing.GridBagPanel | 11 scala.swing.InternalFrame | 12 scala.swing.ScrollPane | 13 scala.swing.SingleRefCollection | 14 scala.swing.Window | 15 scala.swing.event.Key | 16 scala.swing.Swing | 17 scala.swing.event | 18 scala.swing | 19 scala.swing.Action | 20 scala.swing.Adjustable | 21 scala.swing.Applet | 22 scala.swing.ComboBox | 23 scala.swing.Component | 24 scala.swing.Container | 25 scala.swing.Container.Wrapper | 26 scala.swing.ListView | 27 scala.swing.ListView.selection | 28 scala.swing.MenuBar | 29 scala.swing.Reactions | 30 scala.swing.RichWindow | 31 scala.swing.Scrollable | 32 scala.swing.SequentialContainer | 33 scala.swing.TabbedPane | 34 scala.swing.Table | 35 scala.swing.Table.selection | 36 scala.swing.TextComponent | 37 scala.swing.uitest | 38 scala.swing.ListView.Renderer |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 scala | ||||||||||||||||||||||||||||||||||||||
| 2 scala.swing.BorderPanel | ||||||||||||||||||||||||||||||||||||||
| 3 scala.swing.ComboBox.BuiltInEditor | ||||||||||||||||||||||||||||||||||||||
| 4 scala.swing.DesktopPane | ||||||||||||||||||||||||||||||||||||||
| 5 scala.swing.Dialog | ||||||||||||||||||||||||||||||||||||||
| 6 scala.swing.FileChooser | ||||||||||||||||||||||||||||||||||||||
| 7 scala.swing.FlowPanel | ||||||||||||||||||||||||||||||||||||||
| 8 scala.swing.Font | ||||||||||||||||||||||||||||||||||||||
| 9 scala.swing.FormattedTextField | ||||||||||||||||||||||||||||||||||||||
| 10 scala.swing.GridBagPanel | ||||||||||||||||||||||||||||||||||||||
| 11 scala.swing.InternalFrame | ||||||||||||||||||||||||||||||||||||||
| 12 scala.swing.ScrollPane | ||||||||||||||||||||||||||||||||||||||
| 13 scala.swing.SingleRefCollection | ||||||||||||||||||||||||||||||||||||||
| 14 scala.swing.Window | ||||||||||||||||||||||||||||||||||||||
| 15 scala.swing.event.Key | ||||||||||||||||||||||||||||||||||||||
| 16 scala.swing.Swing | 2 | |||||||||||||||||||||||||||||||||||||
| 17 scala.swing.event | 69 | |||||||||||||||||||||||||||||||||||||
| 18 scala.swing | 3 | 1 | ||||||||||||||||||||||||||||||||||||
| 19 scala.swing.Action | 2 | |||||||||||||||||||||||||||||||||||||
| 20 scala.swing.Adjustable | 2 | |||||||||||||||||||||||||||||||||||||
| 21 scala.swing.Applet | 3 | |||||||||||||||||||||||||||||||||||||
| 22 scala.swing.ComboBox | 4 | |||||||||||||||||||||||||||||||||||||
| 23 scala.swing.Component | 2 | |||||||||||||||||||||||||||||||||||||
| 24 scala.swing.Container | 3 | |||||||||||||||||||||||||||||||||||||
| 25 scala.swing.Container.Wrapper | 2 | |||||||||||||||||||||||||||||||||||||
| 26 scala.swing.ListView | 5 | |||||||||||||||||||||||||||||||||||||
| 27 scala.swing.ListView.selection | 1 | |||||||||||||||||||||||||||||||||||||
| 28 scala.swing.MenuBar | 1 | |||||||||||||||||||||||||||||||||||||
| 29 scala.swing.Reactions | 2 | 1 | ||||||||||||||||||||||||||||||||||||
| 30 scala.swing.RichWindow | 1 | |||||||||||||||||||||||||||||||||||||
| 31 scala.swing.Scrollable | 1 | |||||||||||||||||||||||||||||||||||||
| 32 scala.swing.SequentialContainer | 2 | |||||||||||||||||||||||||||||||||||||
| 33 scala.swing.TabbedPane | 4 | |||||||||||||||||||||||||||||||||||||
| 34 scala.swing.Table | 7 | |||||||||||||||||||||||||||||||||||||
| 35 scala.swing.Table.selection | 1 | |||||||||||||||||||||||||||||||||||||
| 36 scala.swing.TextComponent | 3 | |||||||||||||||||||||||||||||||||||||
| 37 scala.swing.uitest | 5 | |||||||||||||||||||||||||||||||||||||
| 38 scala.swing.ListView.Renderer | 2 | 1 |
16→18 scala.swing.Swing uses scala.swing part of a loop✕
- Connections
- 2 pairs of types, where a type in scala.swing.Swing uses a type in scala.swing.
- The types involved
scala.swing.Swing.EmptyIcon→scala.swing.Componentscala.swing.Swing.PeerContainer→scala.swing.Container
- Direction
- scala.swing.Swing uses scala.swing, so a change to scala.swing can break scala.swing.Swing, while a change to scala.swing.Swing can't break scala.swing.
- Position
- Above the diagonal, so it is part of a loop. Neither module can be changed, tested or released on its own until one of these dependencies is removed.
17→18 scala.swing.event uses scala.swing part of a loop✕
- Connections
- 69 pairs of types, where a type in scala.swing.event uses a type in scala.swing. Showing 25 of them; the rest are in namespace-graph.json in this report's bundle.
- The types involved
scala.swing.event.ActionEvent→scala.swing.Componentscala.swing.event.BackgroundChanged→scala.swing.Componentscala.swing.event.ButtonClicked→scala.swing.AbstractButtonscala.swing.event.CaretUpdate→scala.swing.TextComponentscala.swing.event.ColorChanged→scala.swing.Componentscala.swing.event.ComponentAdded→scala.swing.Componentscala.swing.event.ComponentAdded→scala.swing.Containerscala.swing.event.ComponentEvent→scala.swing.Componentscala.swing.event.ComponentRemoved→scala.swing.Componentscala.swing.event.ComponentRemoved→scala.swing.Containerscala.swing.event.ContainerEvent→scala.swing.Containerscala.swing.event.EditDone→scala.swing.TextFieldscala.swing.event.FocusEvent→scala.swing.Componentscala.swing.event.FocusGained→scala.swing.Componentscala.swing.event.FocusLost→scala.swing.Componentscala.swing.event.FontChanged→scala.swing.Componentscala.swing.event.ForegroundChanged→scala.swing.Componentscala.swing.event.InternalFrameActivated→scala.swing.InternalFramescala.swing.event.InternalFrameClosed→scala.swing.InternalFramescala.swing.event.InternalFrameClosing→scala.swing.InternalFramescala.swing.event.InternalFrameDeactivated→scala.swing.InternalFramescala.swing.event.InternalFrameDeiconified→scala.swing.InternalFramescala.swing.event.InternalFrameEvent→scala.swing.InternalFramescala.swing.event.InternalFrameIconified→scala.swing.InternalFramescala.swing.event.InternalFrameOpened→scala.swing.InternalFrame
- Direction
- scala.swing.event uses scala.swing, so a change to scala.swing can break scala.swing.event, while a change to scala.swing.event can't break scala.swing.
- Position
- Above the diagonal, so it is part of a loop. Neither module can be changed, tested or released on its own until one of these dependencies is removed.
18→16 scala.swing uses scala.swing.Swing✕
- Connections
- 3 pairs of types, where a type in scala.swing uses a type in scala.swing.Swing.
- The types involved
scala.swing.ColorChooser→scala.swing.Swing.PeerContainerscala.swing.Dialog→scala.swing.Swing.PeerContainerscala.swing.Window→scala.swing.Swing.PeerContainer
- Direction
- scala.swing uses scala.swing.Swing, so a change to scala.swing.Swing can break scala.swing, while a change to scala.swing can't break scala.swing.Swing.
- Position
- Below the diagonal: scala.swing uses a module listed above it, which is the healthy direction.
18→17 scala.swing uses scala.swing.event✕
- Connections
- 1 pair of types, where a type in scala.swing uses a type in scala.swing.event.
- The types involved
scala.swing.Publisher→scala.swing.event.Event
- Direction
- scala.swing uses scala.swing.event, so a change to scala.swing.event can break scala.swing, while a change to scala.swing can't break scala.swing.event.
- Position
- Below the diagonal: scala.swing uses a module listed above it, which is the healthy direction.
19→18 scala.swing.Action uses scala.swing✕
- Connections
- 2 pairs of types, where a type in scala.swing.Action uses a type in scala.swing.
- The types involved
scala.swing.Action.NoAction→scala.swing.Actionscala.swing.Action.Trigger→scala.swing.Action
- Direction
- scala.swing.Action uses scala.swing, so a change to scala.swing can break scala.swing.Action, while a change to scala.swing.Action can't break scala.swing.
- Position
- Below the diagonal: scala.swing.Action uses a module listed above it, which is the healthy direction.
20→18 scala.swing.Adjustable uses scala.swing✕
- Connections
- 2 pairs of types, where a type in scala.swing.Adjustable uses a type in scala.swing.
- The types involved
scala.swing.Adjustable.Wrapper→scala.swing.Adjustablescala.swing.Adjustable.Wrapper→scala.swing.Oriented
- Direction
- scala.swing.Adjustable uses scala.swing, so a change to scala.swing can break scala.swing.Adjustable, while a change to scala.swing.Adjustable can't break scala.swing.
- Position
- Below the diagonal: scala.swing.Adjustable uses a module listed above it, which is the healthy direction.
21→18 scala.swing.Applet uses scala.swing✕
- Connections
- 3 pairs of types, where a type in scala.swing.Applet uses a type in scala.swing.
- The types involved
scala.swing.Applet.UI→scala.swing.Appletscala.swing.Applet.UI→scala.swing.Componentscala.swing.Applet.UI→scala.swing.RootPanel
- Direction
- scala.swing.Applet uses scala.swing, so a change to scala.swing can break scala.swing.Applet, while a change to scala.swing.Applet can't break scala.swing.
- Position
- Below the diagonal: scala.swing.Applet uses a module listed above it, which is the healthy direction.
22→18 scala.swing.ComboBox uses scala.swing✕
- Connections
- 4 pairs of types, where a type in scala.swing.ComboBox uses a type in scala.swing.
- The types involved
scala.swing.ComboBox.BuiltInEditor→scala.swing.Componentscala.swing.ComboBox.Editor→scala.swing.Componentscala.swing.ComboBox.Editor→scala.swing.Publisherscala.swing.ComboBox.selection→scala.swing.Publisher
- Direction
- scala.swing.ComboBox uses scala.swing, so a change to scala.swing can break scala.swing.ComboBox, while a change to scala.swing.ComboBox can't break scala.swing.
- Position
- Below the diagonal: scala.swing.ComboBox uses a module listed above it, which is the healthy direction.
23→18 scala.swing.Component uses scala.swing✕
- Connections
- 2 pairs of types, where a type in scala.swing.Component uses a type in scala.swing.
- The types involved
scala.swing.Component.keys→scala.swing.Publisherscala.swing.Component.mouse→scala.swing.Publisher
- Direction
- scala.swing.Component uses scala.swing, so a change to scala.swing can break scala.swing.Component, while a change to scala.swing.Component can't break scala.swing.
- Position
- Below the diagonal: scala.swing.Component uses a module listed above it, which is the healthy direction.
24→18 scala.swing.Container uses scala.swing✕
- Connections
- 3 pairs of types, where a type in scala.swing.Container uses a type in scala.swing.
- The types involved
scala.swing.Container.Wrapper→scala.swing.Componentscala.swing.Container.Wrapper→scala.swing.Containerscala.swing.Container.Wrapper→scala.swing.Publisher
- Direction
- scala.swing.Container uses scala.swing, so a change to scala.swing can break scala.swing.Container, while a change to scala.swing.Container can't break scala.swing.
- Position
- Below the diagonal: scala.swing.Container uses a module listed above it, which is the healthy direction.
25→18 scala.swing.Container.Wrapper uses scala.swing✕
- Connections
- 2 pairs of types, where a type in scala.swing.Container.Wrapper uses a type in scala.swing.
- The types involved
scala.swing.Container.Wrapper.Content→scala.swing.BufferWrapperscala.swing.Container.Wrapper.Content→scala.swing.Component
- Direction
- scala.swing.Container.Wrapper uses scala.swing, so a change to scala.swing can break scala.swing.Container.Wrapper, while a change to scala.swing.Container.Wrapper can't break scala.swing.
- Position
- Below the diagonal: scala.swing.Container.Wrapper uses a module listed above it, which is the healthy direction.
26→18 scala.swing.ListView uses scala.swing✕
- Connections
- 5 pairs of types, where a type in scala.swing.ListView uses a type in scala.swing.
- The types involved
scala.swing.ListView.AbstractRenderer→scala.swing.Componentscala.swing.ListView.AbstractRenderer→scala.swing.ListViewscala.swing.ListView.GenericRenderer→scala.swing.Componentscala.swing.ListView.GenericRenderer→scala.swing.ListViewscala.swing.ListView.selection→scala.swing.Publisher
- Direction
- scala.swing.ListView uses scala.swing, so a change to scala.swing can break scala.swing.ListView, while a change to scala.swing.ListView can't break scala.swing.
- Position
- Below the diagonal: scala.swing.ListView uses a module listed above it, which is the healthy direction.
27→18 scala.swing.ListView.selection uses scala.swing✕
- Connections
- 1 pair of types, where a type in scala.swing.ListView.selection uses a type in scala.swing.
- The types involved
scala.swing.ListView.selection.Indices→scala.swing.SetWrapper
- Direction
- scala.swing.ListView.selection uses scala.swing, so a change to scala.swing can break scala.swing.ListView.selection, while a change to scala.swing.ListView.selection can't break scala.swing.
- Position
- Below the diagonal: scala.swing.ListView.selection uses a module listed above it, which is the healthy direction.
28→18 scala.swing.MenuBar uses scala.swing✕
- Connections
- 1 pair of types, where a type in scala.swing.MenuBar uses a type in scala.swing.
- The types involved
scala.swing.MenuBar.NoMenuBar→scala.swing.MenuBar
- Direction
- scala.swing.MenuBar uses scala.swing, so a change to scala.swing can break scala.swing.MenuBar, while a change to scala.swing.MenuBar can't break scala.swing.
- Position
- Below the diagonal: scala.swing.MenuBar uses a module listed above it, which is the healthy direction.
29→17 scala.swing.Reactions uses scala.swing.event✕
- Connections
- 2 pairs of types, where a type in scala.swing.Reactions uses a type in scala.swing.event.
- The types involved
scala.swing.Reactions.Impl→scala.swing.event.Eventscala.swing.Reactions.Wrapper→scala.swing.event.Event
- Direction
- scala.swing.Reactions uses scala.swing.event, so a change to scala.swing.event can break scala.swing.Reactions, while a change to scala.swing.Reactions can't break scala.swing.event.
- Position
- Below the diagonal: scala.swing.Reactions uses a module listed above it, which is the healthy direction.
29→18 scala.swing.Reactions uses scala.swing✕
- Connections
- 1 pair of types, where a type in scala.swing.Reactions uses a type in scala.swing.
- The types involved
scala.swing.Reactions.Impl→scala.swing.Reactions
- Direction
- scala.swing.Reactions uses scala.swing, so a change to scala.swing can break scala.swing.Reactions, while a change to scala.swing.Reactions can't break scala.swing.
- Position
- Below the diagonal: scala.swing.Reactions uses a module listed above it, which is the healthy direction.
30→18 scala.swing.RichWindow uses scala.swing✕
- Connections
- 1 pair of types, where a type in scala.swing.RichWindow uses a type in scala.swing.
- The types involved
scala.swing.RichWindow.Undecorated→scala.swing.RichWindow
- Direction
- scala.swing.RichWindow uses scala.swing, so a change to scala.swing can break scala.swing.RichWindow, while a change to scala.swing.RichWindow can't break scala.swing.
- Position
- Below the diagonal: scala.swing.RichWindow uses a module listed above it, which is the healthy direction.
31→18 scala.swing.Scrollable uses scala.swing✕
- Connections
- 1 pair of types, where a type in scala.swing.Scrollable uses a type in scala.swing.
- The types involved
scala.swing.Scrollable.Wrapper→scala.swing.Scrollable
- Direction
- scala.swing.Scrollable uses scala.swing, so a change to scala.swing can break scala.swing.Scrollable, while a change to scala.swing.Scrollable can't break scala.swing.
- Position
- Below the diagonal: scala.swing.Scrollable uses a module listed above it, which is the healthy direction.
32→18 scala.swing.SequentialContainer uses scala.swing✕
- Connections
- 2 pairs of types, where a type in scala.swing.SequentialContainer uses a type in scala.swing.
- The types involved
scala.swing.SequentialContainer.Wrapper→scala.swing.Componentscala.swing.SequentialContainer.Wrapper→scala.swing.SequentialContainer
- Direction
- scala.swing.SequentialContainer uses scala.swing, so a change to scala.swing can break scala.swing.SequentialContainer, while a change to scala.swing.SequentialContainer can't break scala.swing.
- Position
- Below the diagonal: scala.swing.SequentialContainer uses a module listed above it, which is the healthy direction.
33→18 scala.swing.TabbedPane uses scala.swing✕
- Connections
- 4 pairs of types, where a type in scala.swing.TabbedPane uses a type in scala.swing.
- The types involved
scala.swing.TabbedPane.Page→scala.swing.Componentscala.swing.TabbedPane.Page→scala.swing.TabbedPanescala.swing.TabbedPane.pages→scala.swing.BufferWrapperscala.swing.TabbedPane.selection→scala.swing.Publisher
- Direction
- scala.swing.TabbedPane uses scala.swing, so a change to scala.swing can break scala.swing.TabbedPane, while a change to scala.swing.TabbedPane can't break scala.swing.
- Position
- Below the diagonal: scala.swing.TabbedPane uses a module listed above it, which is the healthy direction.
34→18 scala.swing.Table uses scala.swing✕
- Connections
- 7 pairs of types, where a type in scala.swing.Table uses a type in scala.swing.
- The types involved
scala.swing.Table.AbstractRenderer→scala.swing.Componentscala.swing.Table.AbstractRenderer→scala.swing.Tablescala.swing.Table.JTableMixin→scala.swing.Tablescala.swing.Table.LabelRenderer→scala.swing.Tablescala.swing.Table.Renderer→scala.swing.Componentscala.swing.Table.Renderer→scala.swing.Tablescala.swing.Table.selection→scala.swing.Publisher
- Direction
- scala.swing.Table uses scala.swing, so a change to scala.swing can break scala.swing.Table, while a change to scala.swing.Table can't break scala.swing.
- Position
- Below the diagonal: scala.swing.Table uses a module listed above it, which is the healthy direction.
35→18 scala.swing.Table.selection uses scala.swing✕
- Connections
- 1 pair of types, where a type in scala.swing.Table.selection uses a type in scala.swing.
- The types involved
scala.swing.Table.selection.SelectionSet→scala.swing.SetWrapper
- Direction
- scala.swing.Table.selection uses scala.swing, so a change to scala.swing can break scala.swing.Table.selection, while a change to scala.swing.Table.selection can't break scala.swing.
- Position
- Below the diagonal: scala.swing.Table.selection uses a module listed above it, which is the healthy direction.
36→18 scala.swing.TextComponent uses scala.swing✕
- Connections
- 3 pairs of types, where a type in scala.swing.TextComponent uses a type in scala.swing.
- The types involved
scala.swing.TextComponent.Caret→scala.swing.Publisherscala.swing.TextComponent.HasColumns→scala.swing.TextComponentscala.swing.TextComponent.HasRows→scala.swing.TextComponent
- Direction
- scala.swing.TextComponent uses scala.swing, so a change to scala.swing can break scala.swing.TextComponent, while a change to scala.swing.TextComponent can't break scala.swing.
- Position
- Below the diagonal: scala.swing.TextComponent uses a module listed above it, which is the healthy direction.
37→18 scala.swing.uitest uses scala.swing✕
- Connections
- 5 pairs of types, where a type in scala.swing.uitest uses a type in scala.swing.
- The types involved
scala.swing.uitest.Issue47→scala.swing.Framescala.swing.uitest.Issue47→scala.swing.SimpleSwingApplicationscala.swing.uitest.SI7597→scala.swing.Dialogscala.swing.uitest.SI7597→scala.swing.Framescala.swing.uitest.SI7597→scala.swing.SimpleSwingApplication
- Direction
- scala.swing.uitest uses scala.swing, so a change to scala.swing can break scala.swing.uitest, while a change to scala.swing.uitest can't break scala.swing.
- Position
- Below the diagonal: scala.swing.uitest uses a module listed above it, which is the healthy direction.
38→18 scala.swing.ListView.Renderer uses scala.swing✕
- Connections
- 2 pairs of types, where a type in scala.swing.ListView.Renderer uses a type in scala.swing.
- The types involved
scala.swing.ListView.Renderer.Wrapped→scala.swing.Componentscala.swing.ListView.Renderer.Wrapped→scala.swing.ListView
- Direction
- scala.swing.ListView.Renderer uses scala.swing, so a change to scala.swing can break scala.swing.ListView.Renderer, while a change to scala.swing.ListView.Renderer can't break scala.swing.
- Position
- Below the diagonal: scala.swing.ListView.Renderer uses a module listed above it, which is the healthy direction.
38→26 scala.swing.ListView.Renderer uses scala.swing.ListView✕
- Connections
- 1 pair of types, where a type in scala.swing.ListView.Renderer uses a type in scala.swing.ListView.
- The types involved
scala.swing.ListView.Renderer.Wrapped→scala.swing.ListView.Renderer
- Direction
- scala.swing.ListView.Renderer uses scala.swing.ListView, so a change to scala.swing.ListView can break scala.swing.ListView.Renderer, while a change to scala.swing.ListView.Renderer can't break scala.swing.ListView.
- Position
- Below the diagonal: scala.swing.ListView.Renderer uses a module listed above it, which is the healthy direction.
At a glance — Code Health
At a glance — Architecture
At a glance — Maturity
At a glance — Readiness
At a glance — Security
Security & Compliance — OWASP Top-10 mapping
| OWASP category | Findings | Severity |
|---|---|---|
| A05:2025 — Injection | 10 | High / Critical |
| A03:2025 — Software Supply Chain Failures | 6 | Medium |
Roadmap
Top priorities: Write a diagnostic trail the user can hand back with a bug report: a log file under the platform's per-user data directory, switchable with a `--verbose`/`--debug` flag. Start with the error paths that emit nothing — a discarded error is the failure the user cannot describe and you cannot reproduce; Add a SAST step to CI running what this repository's stack ships: scalafix or scapegoat — or `semgrep --config=auto`, which runs on any language — so a security regression fails the build instead of landing; Resolve the 26 Orphaned file finding(s) in Knowledge Freshness — start with Key.scala, Table.scala, ListView.scala.
| Do this | Helps | Effort | Dimension |
|---|---|---|---|
| Write a diagnostic trail the user can hand back with a bug report: a log file under the platform's per-user data directory, switchable with a `--verbose`/`--debug` flag. Start with the error paths that emit nothing — a discarded error is the failure the user cannot describe and you cannot reproduce. | +8.0 pts | Medium | Observability |
| Add a SAST step to CI running what this repository's stack ships: scalafix or scapegoat — or `semgrep --config=auto`, which runs on any language — so a security regression fails the build instead of landing. | +8.0 pts | Medium | Security & performance tooling |
| Resolve the 26 Orphaned file finding(s) in Knowledge Freshness — start with Key.scala, Table.scala, ListView.scala. | +5.7 pts | Medium | Knowledge Freshness |
| Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them. | +4.5 pts | Medium | Architecture documentation |
| Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release. | +3.6 pts | Medium | Release Hygiene |
| On Scala 3, add `-Yexplicit-nulls` to `scalacOptions` so `String` and `String | Null` mean different things, and type each Java API's result as nullable where it can return null; on Scala 2 (or as a first step), enable WartRemover's `Null` wart (`wartremoverErrors += Wart.Null`) or Scalafix's `DisableSyntax.noNulls = true` so the code holds absence in `Option`. Then pay the assertions down rather than adding to them: each `.nn` is a null the compiler could not rule out — wrap the Java value in `Option(…)` at the boundary, pattern-match on `null` once there, or change the API so the null cannot arrive; an `unsafeNulls` import switches the checking off for everything after it. | +2.3 pts | Medium | Nullable reference types |
| Swallowed exception (caught, then discarded) | +2.2 pts | Medium | Exception handling |
| Resolve the 3 REDACTED finding(s) in Supply-chain Provenance & Signing — start with REDACTED, REDACTED, REDACTED. | +1.0 pts | Low | Supply-chain Provenance & Signing |
File quality
| File | Score | Band | Worst signal |
|---|---|---|---|
| REDACTED | 2.7 | Slop | Static Analysis (SAST): High: REDACTED |
| REDACTED | 3.0 | Slop | Static Analysis (SAST): High: REDACTED |
| REDACTED | 5.1 | Mixed | Static Analysis (SAST): High: REDACTED |
| src/main/scala/scala/swing/Table.scala | 6.0 | Mixed | Explicit Debt: TodoComment |
| src/main/scala/scala/swing/AbstractButton.scala | 6.7 | Mixed | Explicit Debt: TodoComment |
| src/main/scala/scala/swing/ComboBox.scala | 6.9 | Mixed | Explicit Debt: TodoComment |
| REDACTED | 6.9 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| src/main/scala/scala/swing/TextField.scala | 8.2 | Near-clean | Explicit Debt: TodoComment |
| src/main/scala/scala/swing/Publisher.scala | 8.2 | Near-clean | Explicit Debt: TodoComment |
| src/main/scala/scala/swing/ScrollBar.scala | 8.2 | Near-clean | Explicit Debt: TodoComment |
| src/main/scala/scala/swing/Slider.scala | 8.2 | Near-clean | Explicit Debt: TodoComment |
| src/main/scala/scala/swing/TabbedPane.scala | 8.2 | Near-clean | Explicit Debt: TodoComment |
| src/main/scala/scala/swing/TextArea.scala | 8.2 | Near-clean | Explicit Debt: TodoComment |
| src/main/scala/scala/swing/InternalFrame.scala | 8.5 | Near-clean | God Classes: TooManyMethods: InternalFrame |
| src/main/scala/scala/swing/Swing.scala | 8.5 | Near-clean | God Classes: TooManyMethods: Swing |
| src/main/scala/scala/swing/UIElement.scala | 8.5 | Near-clean | God Classes: TooManyMethods: UIElement |
How the grades work
A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.
Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.
Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.
Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.
Methodology & how to trust this report
This survey is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. All 52 evaluated dimensions are computed by tools and static analysis; no language model sets or judges any of them. Overall confidence is 0.7, the weighted average across measured dimensions.
What we checked — 52 dimensions across the health lenses
- Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 60 of 72 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line.
- Is there a tool behind the number? Every score below names the method that produced it: Roslyn, git or a scanner, not a narrative.
- Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.
Tools & methods
| Method | Backs | Version | Evaluator |
|---|---|---|---|
| Roslyn static analysis | Complexity, cohesion, coupling, dead code, API surface, layering | 5.3.0 | ✓ deterministic |
| Native secret scanner | Hardcoded secrets / credentials | 1.0.0 | ✓ deterministic |
| Canine Code Analyzer duplication detector (in-process) | Code duplication | 1.0.0 | ✓ deterministic |
| Coverage (coverlet / dotnet-coverage) | Line & branch coverage | 10.0.400 | ✓ deterministic |
| NuGet / dotnet | Outdated, vulnerable & deprecated dependencies | 10.0.400 | ✓ deterministic |
| git / LibGit2Sharp | Churn hotspots, knowledge concentration, history | 2.43.0 · 0.31.0 | ✓ deterministic |
| gitleaks · semgrep · trivy | Secrets in history, SAST, CVEs, IaC & container, PII / GDPR | 1.86.0 · 0.69.3 | ✓ deterministic |
Run transparency — what happened this run
- D8 Code Coverage — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Coverage NOT MEASURED: test source is present (.scala) but the built-in coverage collector has no runner for this repository's ecosystem — so this suite was never executed by it. Not scored — this is a gap in the analyzer's language coverage, not a defect in the repo. To have real coverage read, produce a coverage report in a standard format (`addSbtPlugin("org.scoverage" % "sbt-scoverage" % "<version>")` in `project/plugins.sbt`, then `sbt clean coverage test coverageReport`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures. You can widen what we reach: optional: produce a coverage report in a standard format (`addSbtPlugin("org.scoverage" % "sbt-scoverage" % "<version>")` in `project/plugins.sbt`, then `sbt clean coverage test coverageReport`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures — then the real number is read on the next scan.
- D11 Test Reliability — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Test source is present (.scala) and this repository declares an sbt build (repository root, 2 test files), but it was not re-run: the analyzer environment could not run it. Not scored — this is a gap in the analyzer's language coverage, not a finding about this repository.
- D12 Dependency Hygiene — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This repository's dependency manifest (an sbt build (build.sbt)) was found, but this pass cannot parse it for hygiene, so no package was assessed. Zero packages read is NOT a clean dependency tree, so this is NOT SCORED — a gap in the analyzer, not a verdict about this repository. This row is about dependency HYGIENE — outdated, deprecated or unmaintained direct dependencies; known CVEs in the same dependency graph are a separate question, reported under D30 wherever the manifest is OSV-readable.
- D14 License Compliance — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Not scored — this repository's 1 sbt build file(s) (build.sbt and project/*.scala) were read and none of the production library dependencies they declare carries a version this pass can resolve from the file itself. sbt is a program rather than a manifest: a val holding one string literal is read, but anything computed would need the build run, and this pass does not run it. Licences are resolved from the POMs Maven Central publishes, which requires an exact coordinate to ask about. NOT a finding that this repository's licences are compliant: this dimension asserts nothing about its licensing in either direction.
- D16 Bus Factor — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. All 26 significant source file(s) were last meaningfully changed so long ago that no living knowledge remains — nothing since has been substantial enough to re-establish ownership (a broad, mechanical sweep that touches many files shallowly does not count, and neither does no activity at all). There is no concentration to measure, so the bus factor is not scored. This is not a clean bill: nobody currently holds working knowledge of this code (see D34 Knowledge Freshness). Counted over 3 of the 104 production source files in this repository: 78 are under the ~2,400-byte size floor this dimension measures over, and the remaining 23 have no attributable history left to measure.
- D20 ADR Quality — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. The ADR expectation is gated on whether a repository ships a deployable product. Our repo-kind classifier reads .NET project files and the host and package markers of the other ecosystems it knows (a Go `package main`, a Cargo binary, a package.json `bin`, `start` script or application dev server such as Vite or Next, Python console scripts or a Django/WSGI entry point, a Spring Boot / WAR / Gradle application build, a Rack or Rails app, a Composer project, an OTP release or escript, a Dockerfile, a Procfile, a Platform.sh `.platform/routes.yaml`, and the corresponding published-package manifests, including an OTP `*.app.src`, a Drupal module's `*.info` and a Claude Code `.claude-plugin/plugin.json`), and found none here, so we could not tell what kind of repository this is and did not assess its ADR log. This is a gap in our analyzer, not a finding about this repository.
- D21 Naming Consistency — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D21's deterministic naming rules are gated on C# first (docs/plans/deterministic-engine.md, P5): each other language is switched on only after its own concept suite and A/B gate pass. Until then its declarations carry no naming verdict this run — this says nothing about whether its names are consistent.
- D22 Internal API Consistency — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D22 identifies the intentionally-exposed surface from `IsPackable` and `.Contracts` project names, MSBuild conventions read off the loaded project set. This target exposed no such projects, so the probe never ran; this says nothing about whether the repository has a public API. This repository commits no C#/VB source at all, so there was never an MSBuild project set to read these conventions off. That is OUR side and it is an ADMISSION gap, not an environment fault: no published-package marker D22 reads admitted any project here. D22 DOES collect the public API of every language in this tree, and admits a project only when its manifest makes that ecosystem's publication act in a form the marker recognises — so what is missing is not a collector but an admission rule for the publication act this repository makes, if it makes one. The remedy is a better discriminator for that marker — not a collector, and no change to the scan image can close it. The marker's rules are measured to refuse applications, so one refused repository is the rule working as calibrated; several are the evidence that it is too strict.
- D24 Comment Value — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check's reader does not cover the language this repository's product is written in, so it had nothing of the product to read. That is a gap in this analyzer's language reach — not a finding about this repository.
- D27 Navigability — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Navigability is taken over call sites whose callee resolved. For C# that population includes calls into referenced assemblies; for this language only calls declared inside the repository count, so the abstention threshold reads the repository's use of its standard library as a resolution failure. That is a limit of this analyzer, not a build problem in this repository.
- D32 Data Compliance (PII/GDPR) — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. `src/main/scala/scala/swing/Publisher.scala`, `src/main/scala/scala/swing/Reactions.scala` produced a parse error, so every rule in this engine's `gdpr.yml` was absent there. That absence is NOT a clean result: these rules detect personal data crossing a boundary into a log sink, a URL or browser storage, and a file that was never parsed cannot report any of the three. The rest of the tree analysed normally and its rows above stand; only these files are unaccounted for. You can widen what we reach: fix the syntax error (or exclude the file deliberately) and re-scan to cover it.
- D44 Platform End-of-Life — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This dimension reads a project's own statement about the platform it runs on: a TargetFramework in a .NET project file, a .nvmrc or .python-version, a capped requires-python, a Rust toolchain file or Cargo.toml rust-version, a .go-version, .java-version, .ruby-version, .tool-versions or .sdkmanrc, a go.mod go directive, a Maven or Gradle Java level or toolchain, a Gemfile's ruby directive, a mix.exs elixir requirement, a rebar.config minimum_otp_vsn, a pubspec.yaml SDK constraint, a build.sbt scalaVersion, or a framework major pinned by a dependency constraint. This repository carries none of them, so nothing about its platform was established. That is a gap in this analyzer's coverage, NOT a finding that the platform is supported — a language whose runtime is declared elsewhere (Package.swift, a Dockerfile) is simply not read here yet.
- AX1 Captive dependencies — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads Microsoft.Extensions.DependencyInjection registrations in C# and Spring beans in Java/Kotlin only, and this repository defines its own container in src/main/scala/scala/swing/LayoutContainer.scala, whose lifetimes are not modelled yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- C1 Data Protection — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These personal data controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks personal data controls.
- C2 Access Controls — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These authorization controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks authorization controls.
- M4 Documentation accuracy — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. M4 checks only the claim kinds adjudicated at or above 95 % precision: links and versions (PREREGISTRATION version 9), and artefact counts an order of magnitude off. Paths, command arguments, installs, environment variables, settings, projects, packages, routes, cd targets, infrastructure products and removed modules are read but not checked, and none of them is reported or counted.
- P5 DR & Backup — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. No backup/snapshot/replication config, RTO/RPO or restore-procedure documentation was found — and no production persistence was detected either (no data-access packages, no data-store services, no database resources), so there is nothing in this repository whose loss a DR control would recover. If this system's data lives in a platform or ops repo we can't see, that's where the DR evidence belongs.
Limitations & what we did not check
We assess the repository exactly as committed, and only the repository. By design we do not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.
Per-dimension blind spots
- D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
- D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
- D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
- D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
- D5 Coupling: Coupling is measured between projects/assemblies — runtime coupling through DI, reflection, messaging or shared databases is invisible to a static reference graph.
- D6 Cohesion (LCOM4): LCOM4 cohesion is syntactic — it infers connectivity from which methods touch which fields/methods by name, not from real runtime behaviour or intent.
- D9 Test Distribution: The test-pyramid shape is inferred from project/folder naming and references, with a single test host bucketed per-file by its path tier and content signals — a suite that names tiers unconventionally and gives no per-file signal can still be mis-bucketed.
- D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
- D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
- D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
- D26 Project Cohesion: Project focus is sized from members/namespaces per project — a project that is broad by deliberate design reads the same as one that has sprawled.
- D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
- D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
- D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
- D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
- AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
- M4 Documentation accuracy: Documentation accuracy checks links, versions and artefact counts against the tree: other claims (paths, commands, settings, routes) are read but not checked, and it cannot run the onboarding or measure how long a real new joiner takes.
- P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.
Dimensions
D1 · Cyclomatic Complexity
0 method(s) exceeded the cyclomatic complexity threshold of 15.
D2 · Cognitive Complexity
0 method(s) exceeded the cognitive complexity threshold of 15.
D3 · God Classes
5 god class(es) detected.
What to do
- Resolve the 5 TooManyMethods finding(s) in God Classes — start with AbstractButton.scala, InternalFrame.scala, Swing.scala. — One of this dimension's main actionable groups (5 warning-level).
- Enforce God Classes in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.
D4 · Code Duplication
0 duplicated block group(s) detected.
D5 · Coupling
2 production modules (sbt), 0 dependency cycle(s), 0 unstable depended-on module(s). Read from the build's own module declarations; a dependsOn spread (deps: _*) and a project whose directory a helper computes are not visible there; 1 module(s) off the main sequence.
What to do
- Resolve the 1 Off the main sequence finding(s) in Coupling. — One of this dimension's main actionable groups (1 warning-level).
- Enforce Coupling in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.
D6 · Cohesion (LCOM4)
0 of 5 classes have LCOM4 above 3.
D9 · Test Distribution
2 test methods: 2 unit, 0 integration, 0 BDD, 0 e2e. The Scala suite contributes 2 test case(s) across 2 file(s) in a test source set declaring at least one — every `test("…")`, `it("…")`, `property("…")` and `"…" in {…}` registration and every JUnit `@Test`, which is how munit, ScalaTest, utest, ZIO Test and specs2 declare a case; a case registered under a computed name is not counted, so this is a floor. Its tier split is INFERRED from paths and file names, except sbt's src/it source set, which the build declares.
D13 · Secret Scanning
Secret scan ran and found no leaked secrets.
D15 · Churn × Complexity Hotspots
No churn × complexity hotspots in the window.
D17 · Explicit Debt
13 deducted task-comment markers across 10179 LoC (0.1/KLoC) → score 9.8. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.
What to do
- Resolve the 13 TodoComment finding(s) in Explicit Debt — start with ComboBox.scala (3), Table.scala (3), AbstractButton.scala. — One of this dimension's main actionable groups (13 warning-level).
- Enforce Explicit Debt in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.
D26 · Project Cohesion
1 of 1 build units (sbt) flagged as possibly oversized/incoherent.
What to do
- Resolve the 1 Projects may be oversized for their cohesion finding(s) in Project Cohesion. — One of this dimension's main actionable groups (1 recommendation-level).
D28 · Secrets (history)
gitleaks scanned the full history AND the current working tree and found no secrets.
D29 · Static Analysis (SAST)
10 finding(s): 0 critical, 8 high, 2 medium, 0 low. 8 unpinned-GitHub-Actions row(s) are reported here but scored by D36 (supply-chain provenance), which measures that posture as `pinned_actions` — one pinning decision is charged once, not once per lens. semgrep hit a parse error in 2 file(s) — `src/main/scala/scala/swing/Publisher.scala`, `src/main/scala/scala/swing/Reactions.scala` — so no absence of findings in them is evidence of anything, and nothing in them was analysed. Fix the syntax error (or exclude the file deliberately) and re-scan to cover them. Separately, one or more rules could not re-parse an embedded snippet in 1 file(s) (e.g. a workflow `run:` block read as shell). Those files WERE scanned and their other rows are unaffected; only those rules' view of those snippets is missing.
What to do
- Resolve the 2 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED (2). — One of this dimension's main actionable groups (2 warning-level).
- No action in Static Analysis (SAST) — all 8 REDACTED finding(s) are reported here at file:line but scored by D36 (supply-chain provenance), so none is charged to this dimension. — One of this dimension's main actionable groups (8 issue-level, 0 of them charged here).
D34 · Knowledge Freshness
26 of 26 significant source file(s) are orphaned — their living knowledge has decayed to nothing, so no one currently understands them. The largest is src/main/scala/scala/swing/event/Key.scala. Counted over 26 of the 104 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.
What to do
- Resolve the 26 Orphaned file finding(s) in Knowledge Freshness — start with Key.scala, Table.scala, ListView.scala. — One of this dimension's main actionable groups (26 recommendation-level).
- Resolve the 1 Concentrated knowledge decay finding(s) in Knowledge Freshness. — One of this dimension's main actionable groups (1 recommendation-level).
D35 · Change Coupling
No strong hidden change-coupling between production files.
D36 · Supply-chain Provenance & Signing
1/4 supply-chain integrity signals present (provenance, signing, SBOM, pinned actions).
What to do
- Resolve the 3 REDACTED finding(s) in Supply-chain Provenance & Signing — start with REDACTED, REDACTED, REDACTED. — One of this dimension's main actionable groups (3 warning-level).
- Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 recommendation-level).
Frontend & cross-cutting dimensions
AX10 · Code composition
What to do
- The domain core is a small share of production code, but most of the rest matched no layer vocabulary at all — so this is not yet an anemic-domain finding. The namespace/path convention could not place that code, which makes the composition above a statement about the naming, not about the design. Name the layers (or check that the repository's conventions differ from the ones this check knows) before reading a thin domain into it.
AX3 · Project dependency cycles
AX4 · Dependency direction
AX6 · Interface segregation
GD1 · Unfinished & placeholder code
IC1 · Incompleteness & stubs
M1 · Documentation (README)
What to do
- Explain in the README how to run the tests. Add a section called Testing to the README in the repository's top folder, saying how to run the test suite.
M2 · Architecture documentation
- No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
- No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.
What to do
- Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
- Add a C4 context/container diagram (Structurizr, PlantUML or Mermaid) or an architecture.md overview.
M3 · Folder & project structure
M4 · Documentation accuracy
P1 · CI/CD gates
- A CI pipeline exists but no build step was matched — changes may merge without the build ever running. A build step may be invoked directly as a command, or declared as a task that a runner named in the pipeline resolves.
What to do
- Add an explicit build step to your CI pipeline — your stack's own build command, or, if the pipeline delegates to a task runner, a build task that runner executes in CI — so every change is built before merge.
P2 · Observability
- No logging or diagnostics emission found. This repository ships a binary its users launch rather than a service you operate, so there is no operator to page — but when a run fails on a user's machine, neither they nor you have anything to read.
What to do
- Write a diagnostic trail the user can hand back with a bug report: a log file under the platform's per-user data directory, switchable with a `--verbose`/`--debug` flag. Start with the error paths that emit nothing — a discarded error is the failure the user cannot describe and you cannot reproduce.
P3 · Security & performance tooling
- No static application security testing detected. For this repository's stack, add scalafix or scapegoat (or `semgrep --config=auto`, which runs on any language) as a CI step. What was searched, so you can tell an absence from a miss: the 1450 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner. — REDACTED:7
What to do
- Add a SAST step to CI running what this repository's stack ships: scalafix or scapegoat — or `semgrep --config=auto`, which runs on any language — so a security regression fails the build instead of landing.
- Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
P6 · Release Hygiene
- No CHANGELOG/HISTORY/RELEASES file — what shipped when isn't easy to reconstruct for support or audit. (Versioning/tagging makes releases traceable, but a changelog records the what.)
What to do
- Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release.
X1 · Async correctness
X12 · Unreachable branch
X13 · Undrained process stream
X14 · Bypassable address classification
X15 · Unvalidated length from an untrusted reader
X16 · Unfloored truncation loop
X17 · Uncapped recursion over a caller-supplied document
X18 · Disposal-pattern correctness
X19 · Unrestored process-global state
X20 · Mistyped argument guard
X21 · Side-effecting pattern guard
X22 · Contradicted release guard
X23 · Unguarded diagnostic materialisation
X24 · Document value interpolated into markup unescaped
X25 · Inert configuration knob
X26 · Unsynchronised callback handoff
X27 · Collection changed while being enumerated
X28 · Index access outside its own emptiness guard
X29 · Per-element action decided by a fixed element
X3 · Exception handling
- `case _: Exception` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter. (×2) — src/main/scala/scala/swing/ComboBox.scala:104, src/main/scala/scala/swing/UIElement.scala:45
What to do
- Swallowed exception (caught, then discarded)
X30 · Support guard that admits what it rejects
X5 · Nullable reference types
- No build over this repository's 102 Scala product file(s) passes `-Yexplicit-nulls`, enables WartRemover's `Null` wart or runs Scalafix's `DisableSyntax.noNulls`, so every reference type admits null and nothing reports a `null` written into the code or returned from a Java API — the first one to reach a method call is a `NullPointerException`. `Option` by convention is a habit no tool here holds the code to.
What to do
- On Scala 3, add `-Yexplicit-nulls` to `scalacOptions` so `String` and `String | Null` mean different things, and type each Java API's result as nullable where it can return null; on Scala 2 (or as a first step), enable WartRemover's `Null` wart (`wartremoverErrors += Wart.Null`) or Scalafix's `DisableSyntax.noNulls = true` so the code holds absence in `Option`. Then pay the assertions down rather than adding to them: each `.nn` is a null the compiler could not rule out — wrap the Java value in `Option(…)` at the boundary, pattern-match on `null` once there, or change the API so the null cannot arrive; an `unsafeNulls` import switches the checking off for everything after it.
Reference — by lens
| Lens | Score | Rating | Impact |
|---|---|---|---|
| Code Health | 58% | Adequate — gated by X3, X5 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Architecture | 87% | Adequate — gated by D26 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Maturity | 50% | Weak — gated by D34, M2 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Readiness | 36% | Weak — gated by P2, P3 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Security | 72% | Adequate — gated by D36 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
Not evidenced — 2 control(s) we could not find positive evidence for
- P4 Deployment & Rollback — not evidenced — no deploy/rollback/approval signal in the repo; absence of evidence is not evidence of a manual release
- P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
Not included — 64 check(s) not relevant to this codebase
- AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
- AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
- AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
- AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
- AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
- AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
- AC7 A11y enforcement — No web markup found — accessibility is not applicable to this repository.
- AX1 Captive dependencies — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX2 Stateful singletons — No container singleton was found, so there is no shared instance for concurrent requests to race on. No class in this Scala code is a Play controller, a Cask routes object, a Scalatra servlet, a Finatra controller, an Akka/Pekko HTTP routes holder or a JSR-330/Spring singleton, so no instance is shared between request threads.
- AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX7 Slice cohesion — not applicable — not a vertical-slice architecture
- AX8 Test isolation — no test/production split to check
- AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
- AXB1 Runtime evidence locked — no reproducible boot — This repository has nothing the runtime tiers could boot or serve — no markup, no UI framework or web-server dependency, no UI component source, no native UI project and no API definition — nothing here is a surface to boot — so runtime a11y/egress/header evidence has no subject here. Not applicable: this is neither a gap in the scan nor a finding about your code.
- C1 Data Protection — Not assessed: these personal data controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks personal data controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C2 Access Controls — Not assessed: these authorization controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks authorization controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C3 Audit Trail — No personal data detected in a persisted data model — no PII-named column (email, first_name, date_of_birth, phone_number, …) or stored credential on a Slick table or in a SQL migration's CREATE TABLE or ALTER TABLE — and no database client (Slick, Doobie, Quill, ScalikeJDBC, Anorm, Skunk, a MongoDB or Cassandra driver, JDBC) imported either, so this repository keeps no sensitive data whose changes an audit trail would record. If it does (through a store configured outside this repository, for instance), the trail belongs to wherever that data is stored.
- C4 Data Retention — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a Slick table or in a SQL migration's CREATE TABLE or ALTER TABLE — and no database or data-store client (Slick, Doobie, Quill, ScalikeJDBC, Anorm, Skunk, JDBC, MongoDB, Cassandra, …) imported either, so this repository keeps no personal data whose lifetime a retention limit would bound.
- C5 Data-Subject Rights — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a Slick table or in a SQL migration's CREATE TABLE or ALTER TABLE — and no database or data-store client (Slick, Doobie, Quill, ScalikeJDBC, Anorm, Skunk, JDBC, MongoDB, Cassandra, …) imported either, so this repository keeps no personal data for a data subject to erase, export or consent over.
- D10 Test Quality — ~112 lines of test source are present (.scala) but no test cases reached the test census for this repository — no test root we could resolve declared them, or the files we read declare no cases in a test framework we recognise — so skipped/assertion-free tests couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
- D11 Test Reliability — Test reliability not included — the .scala suite was found but not re-run
- D12 Dependency Hygiene — Dependency hygiene not measured — dependency manifest found but not parsed for hygiene
- D14 License Compliance — sbt licences not graded — no production declaration in build.sbt carries a literal version
- D16 Bus Factor — dormant codebase — no living knowledge left to concentrate
- D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
- D19 Documentation Quality — No runnable or published unit to look for an example in, and no multi-project root README to look for a map in; the other documentation kinds are withheld (see the gaps), so documentation quality is not applicable here.
- D20 ADR Quality — Repository kind not determined
- D21 Naming Consistency — Naming consistency is measured on C# and TypeScript only; Scala not measured.
- D22 Internal API Consistency — The exposed public-API surface could not be collected — no C#/VB projects loaded.
- D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ sibling projects each declaring an entity of their own or taking another project's integration events. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
- D24 Comment Value — D24 reads C#, Visual Basic, TypeScript and JavaScript comments only — this repository's production source is .scala, which was left unread. Not scored: this is a gap in the analyzer, not a verdict about this repository.
- D25 ADR Conformance — no ADRs to check
- D27 Navigability — D27 counts a call into the standard library or a dependency as unresolved for this repository's language (.scala), so too few call sites counted as resolved to assess navigability. Not scored: this is a gap in the analyzer, not a verdict about this repository.
- D30 Dependency Vulnerabilities — Not scored — no dependency manifest in a supported ecosystem was read for this repository. A gap in the analyzer's language coverage, NOT a finding that the repository is free of vulnerable dependencies (an sbt build (build.sbt) — not scanned yet).
- D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.
- D32 Data Compliance (PII/GDPR) — 2 file(s) were not parsed by semgrep — the PII/GDPR ruleset never ran over them
- D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
- D39 IL Efficiency — D39 measures the IL emitted by a .NET build; this repository has no .NET solution or project files, so the dimension does not apply.
- D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
- D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
- D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
- D43 Malicious Dependencies — Not scored — no dependency manifest in a supported ecosystem was read for this repository. A gap in the analyzer's language coverage, NOT a finding that the repository is free of vulnerable dependencies (an sbt build (build.sbt) — not scanned yet).
- D44 Platform End-of-Life — Platform end-of-life not assessed — this repository declares no platform this pass reads
- D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
- D8 Code Coverage — Coverage not included — suite not readable by the collector
- DM1 Domain Modelling — applicable but not scored (2 signals for this style, 2 needed — the count is met but a required primary signal is absent): 25 value object(s); 5 domain event(s); its domain events are published by services or handlers — no domain entity raises one
- ED1 Event-Driven — not scored — this repository shows none of the 3 signals this lens looks for
- ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
- ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
- P12 CI test-gate honesty — Reported, not scored — and nothing was matched here. The coverage check applies to any stack, and the automatic-re-run check to any GitHub-Actions workflow, but the checks for excluded tests, skipped tests and sleep-based synchronisation currently recognise only some ecosystems' test-runner idioms, so on a repository built with another stack the zeros below mean 'not checked', not 'clean'.
- P7 Outbound HTTP resilience — not applicable — no HTTP server, API framework or worker entry point was found in the JVM source, so there is no service whose uptime a failing dependency could take down
- P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
- P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (`addSbtPlugin("org.scoverage" % "sbt-scoverage" % "<version>")` in `project/plugins.sbt`, then `sbt clean coverage test coverageReport`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures, or wire coverage collection into CI, to enable this cross-layer check
- PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for `@Benchmark` in a Java, Kotlin or Scala file importing JMH or kotlinx-benchmark, Jetpack Benchmark's `measureRepeated` in a file importing androidx.benchmark, or JMH/kotlinx-benchmark/androidx.benchmark in a pom.xml, Gradle or sbt build, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
- PF2 Allocation hygiene — Not scored: this check counted allocation-aware idioms (Span, pools, stackalloc) per line, which describes what kind of code a repository is rather than whether it has an allocation problem, so it was withdrawn. Nothing here is a finding about your code.
- PF3 Async & latency hygiene — Not applicable: this repository declares no async functions, so there is no asynchronous code for a blocking call to stall.
- S1 Web-Security Posture — No web surface: 102 Scala file(s) were read for weak hashes and ciphers, key material fixed in the source, disabled TLS certificate validation and obsolete TLS versions, and none was found. This repository serves no HTTP of its own — no HTTP-server artifact (akka-http, pekko-http, http4s, Play, Finagle, zio-http, cask, Scalatra, a tapir server, Jetty, Undertow, …) outside test scope in its build, and no server package imported or server bound in its production source — so HTTPS enforcement, HSTS, cookie flags and input validation are N/A here, as they are for a C# library or worker. If this codebase starts serving HTTP, the dimension reactivates automatically.
- X10 Duplicated predicate — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X2 Cancellation propagation — no C# was loaded; this repository's Scala was read, and no request in it can be cancelled by a caller — a Scala request takes no token: a Future cannot be cancelled, and cats-effect, ZIO and Monix interrupt the fiber that made the request from outside the call, not through a parameter
- X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
- X4 Structured logging — This check asks whether log calls keep a message's values apart from its text, which needs a logger that can carry them as fields. This repository's Scala was read, and it logs through none that an interpolated message defeats: scala-logging takes an `s"…"` message apart into SLF4J's pattern and arguments at compile time, and log4s, grizzled-slf4j, Play's Logger, Akka's LoggingAdapter, sbt's Logger and Spark's Logging take one finished message (as log4net does in C#). Calls made straight through SLF4J (`org.slf4j.Logger`) would be judged.
- X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X7 Silent fallback defaults — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Appendix A — Findings (grouped)
Critical — 8 finding(s)
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
Serious — 28 finding(s)
- TodoComment src/main/scala/scala/swing/AbstractButton.scala:46
- TodoComment src/main/scala/scala/swing/TextField.scala:49
- TodoComment src/main/scala/scala/swing/ComboBox.scala:35
- TodoComment src/main/scala/scala/swing/ComboBox.scala:45
- TodoComment src/main/scala/scala/swing/ComboBox.scala:97
- TodoComment src/main/scala/scala/swing/Publisher.scala:98
- TodoComment src/main/scala/scala/swing/ScrollBar.scala:34
- TodoComment src/main/scala/scala/swing/Slider.scala:62
- TodoComment src/main/scala/scala/swing/TabbedPane.scala:64
- TodoComment src/main/scala/scala/swing/Table.scala:129
- TodoComment src/main/scala/scala/swing/Table.scala:202
- TodoComment src/main/scala/scala/swing/Table.scala:306
- TodoComment src/main/scala/scala/swing/TextArea.scala:29
- TooManyMethods: AbstractButton src/main/scala/scala/swing/AbstractButton.scala:25
- TooManyMethods: InternalFrame src/main/scala/scala/swing/InternalFrame.scala:11
- TooManyMethods: Swing src/main/scala/scala/swing/Swing.scala:27
- TooManyMethods: Table src/main/scala/scala/swing/Table.scala:116
- TooManyMethods: UIElement src/main/scala/scala/swing/UIElement.scala:76
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- Swallowed exception (caught, then discarded) src/main/scala/scala/swing/ComboBox.scala:104
- Swallowed exception (caught, then discarded) src/main/scala/scala/swing/UIElement.scala:45
- REDACTED
- Off the main sequence: swing
- No structured logging
Minor — 36 finding(s)
- Orphaned file src/main/scala/scala/swing/event/Key.scala:1
- Orphaned file src/main/scala/scala/swing/Table.scala:1
- Orphaned file src/main/scala/scala/swing/ListView.scala:1
- Orphaned file src/main/scala/scala/swing/Component.scala:1
- Orphaned file src/main/scala/scala/swing/ComboBox.scala:1
- Orphaned file src/main/scala/scala/swing/RichWindow.scala:1
- Orphaned file src/main/scala/scala/swing/Swing.scala:1
- Orphaned file src/main/scala/scala/swing/FileChooser.scala:1
- Orphaned file src/main/scala/scala/swing/Publisher.scala:1
- Orphaned file src/main/scala/scala/swing/TabbedPane.scala:1
- Orphaned file src/main/scala/scala/swing/UIElement.scala:1
- Orphaned file src/main/scala/scala/swing/Action.scala:1
- Orphaned file src/main/scala/scala/swing/GridBagPanel.scala:1
- Orphaned file src/main/scala/scala/swing/InternalFrame.scala:1
- Orphaned file src/main/scala/scala/swing/package.scala:1
- Orphaned file src/main/scala/scala/swing/AbstractButton.scala:1
- Orphaned file src/main/scala/scala/swing/SplitPane.scala:1
- Orphaned file src/main/scala/scala/swing/event/MouseEvent.scala:1
- Orphaned file src/main/scala/scala/swing/ScrollPane.scala:1
- Orphaned file src/main/scala/scala/swing/Window.scala:1
- Orphaned file src/main/scala/scala/swing/TextField.scala:1
- Orphaned file src/main/scala/scala/swing/LayoutContainer.scala:1
- Orphaned file src/main/scala/scala/swing/Slider.scala:1
- Orphaned file src/main/scala/scala/swing/TextComponent.scala:1
- Orphaned file src/main/scala/scala/swing/Label.scala:1
- Projects may be oversized for their cohesion
- Concentrated knowledge decay
- REDACTED
- REDACTED
- No ADRs
- No architecture diagram/doc
- CI build step not evidenced
- No SAST REDACTED:7
- No changelog
- Scala's null is not held to the type system everywhere
Appendix B — Reproduction & audit trail
| Dimension | Tool | Version | Command | Findings | Raw output |
|---|---|---|---|---|---|
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-466a7ee362ba4e01bf310b3eb1132dfd/history.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-466a7ee362ba4e01bf310b3eb1132dfd/tree.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-tree.json |
| D29 · Static Analysis (SAST) | semgrep | — | semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/canine-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off --exclude *.arrow --exclude *.avro --exclude *.csv --exclude *.dat --exclude *.db --exclude *.feather --exclude *.geojson --exclude *.h5 --exclude *.hdf5 --exclude *.jsonl --exclude *.log --exclude *.ndjson --exclude *.npy --exclude *.npz --exclude *.orc --exclude *.parquet --exclude *.pickle --exclude *.pkl --exclude *.psv --exclude *.sqlite --exclude *.sqlite3 --exclude *.tfrecord --exclude *.tsv --exclude *.txt . | 10 | artifacts/raw/semgrep.json |
| D30 · Dependency Vulnerabilities | none (dependency manifest found, not scanned for vulnerabilities here) | — | none (dependency manifest found, not scanned for vulnerabilities here): not applicable — Not scored — no dependency manifest in a supported ecosystem was read for this repository. A gap in the analyzer's language coverage, NOT a finding that the repository is free of vulnerable dependencies (an sbt build (build.sbt) — not scanned yet). | 0 | — |
| D31 · IaC & Container Security | trivy | — | trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan. | 0 | — |
| D32 · Data Compliance (PII/GDPR) | semgrep | — | semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that. semgrep could not parse 2 file(s) — `src/main/scala/scala/swing/Publisher.scala`, `src/main/scala/scala/swing/Reactions.scala` — so the PII/GDPR sweep did not cover them at all. | 0 | — |
| D37 · Vulnerability-disclosure Policy | disclosure | — | disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed. | 0 | — |
| D40 · Network Egress Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here. | 0 | — |
| D41 · Kernel & Syscall Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here. | 0 | — |
| D42 · Runtime Threat Enforcement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here. | 0 | — |
| D43 · Malicious Dependencies | none (dependency manifest found, not scanned for vulnerabilities here) | — | none (dependency manifest found, not scanned for vulnerabilities here): not applicable — Not scored — no dependency manifest in a supported ecosystem was read for this repository. A gap in the analyzer's language coverage, NOT a finding that the repository is free of vulnerable dependencies (an sbt build (build.sbt) — not scanned yet). | 0 | — |