Public report of nikivdev/code, published 14 November 2026. It has the same score, grades and number of
findings as the full report. The details of security findings (where they are in the code, which known
vulnerabilities and which passwords or keys were found) are left out, so nobody can use them against the project.
Public
Executive reportMeasured under the Code Assurance Index, an open standard for code quality, using its published scoring rules (rubric version 2026.11.4). Assert signed this survey and filed it in the standard's public register, where anyone can look it up by its survey ID. Check this survey →
Signed and filed in the standard's public register, 14 November 2026, 05:43 UTC · Survey ID cd_295777673ab045bcaeb0cae39018eb58
nikivdev/code
Measured 14 November 2026, 05:43 UTC, at code version a747e74
Bus factor is not measured: One contributor carries this repository.
CAI scoreAt riskNo change since the last survey
The score is built from these lenses. Each lens grades one area of the code, such as how easy it is to change or how well it is protected. The weakest lens counts most, so one weak area pulls the score down instead of being averaged away.
A large codebase: 145,945 lines of product code in 7 projects, tests not counted · Estimated rebuild effort: about 1.0 person-years · Weakest lens: Security and Compliance, 28
Findings by how serious they are
65 critical1385 serious323 minor
14 dimensions are left out of the score. For each one, we either couldn't measure it in this code, or found no evidence of the safeguard we look for, such as a tested backup restore. They count neither for nor against the score, and Limitations lists each one with its reason.
This survey was produced by
Canine Code Analyzer
Producer
Canine Development
Analyzer
Canine Code Analyzer engine 1.0.0
Measured
14 November 2026, 05:43 UTC
A measurement, not a certificate. The Code Assurance Index records a number
together with the evidence it was worked out from, so anyone can recalculate it, but it doesn't certify or guarantee
the code. The standard was written by Canine Development, which also builds the Canine Code Analyzer. It is open to any tool that
implements it, and today the Canine Code Analyzer is the only one that does.
A critical security finding is open, such as a library with a known critical vulnerability or a password or key found in the code. The score itself is unchanged, but its band shows At risk until the finding is fixed. See the Security and Compliance lens.
The score is deterministic, which means the same code always gets the same score. We work it out with tools that follow published rules, and an AI model never decides it, so anyone who applies the same rules to the same code gets the same number. How it is done is explained under Methodology ▸
47of 47 dimensions measured by tools.
1748of 1773 findings point to an exact file and line, so you can open each one in the code. The other 25 concern the repository as a whole, such as missing documentation.
47dimensions across 8 lenses, read from 145,945 lines of product code in 7 projects.
nikivdev/code is rated At risk because critical security findings are open, most of them in the build pipeline. Its score is held back because we found no access checks on the code's endpoints or handlers and nine of the dependencies have a known vulnerability. It scores 40 out of 100, which the At risk rating leaves unchanged. We judged it as a preview release, against a lower bar.
Security and Compliance, at 28, is the weakest lens and counts most in the score. The best first step is recording design decisions, worth about 7 points. Adding access checks would lift Security and Compliance itself, also worth about 7. Raising Security and Compliance to 68 would lift the score to about 47.
Forty-three pipeline tools are referenced by a changeable name, so the build pipeline can be tampered with. Fifteen known security holes in the packages the code depends on can be used by attackers, and four pipeline steps run downloads nobody checks. Pinning each tool to an exact version, updating the vulnerable packages and checking each download against a checksum would close these risks. Limiting each secret to its own step would fix the two secrets exposed to more of the pipeline than needed, and fixing the weaknesses the scanner points to would deal with the security weakness in the code.
The product code is 145,945 lines, about €140,000 to rebuild.
A lens is capped at Adequate while one of its dimensions scores below 4 out of 10, however well the rest of the lens does. That way a serious problem in one place always shows in the lens's rating.
How the score is built: what each lens counts forThe lenses don't count equally. The weakest lens counts most, the next weakest a little less, and so on, so a weak area pulls the score down instead of being averaged away. In the bar below, each part's width shows how much that lens counts and its colour shows its rating. Improving the widest part moves the score most, and as that lens improves, it counts for less, because another lens becomes the weakest.
If Security and Compliance rose from 28 to 68, the lowest score rated Strong, the score would rise from 40 to about 47.
Code composition: what the lines of code are
Product code 100%Tests 0%
New since the last survey: 411 findings
These 411 critical or serious findings weren't in the previous survey, on 26 October 2026. The first 100 are listed here, and the findings file in the download package lists them all.
Code Duplication · Near-duplicate member family (4 members, 30 shared lines) src/ai.rs
Code Duplication · Near-duplicate member pair (155 shared lines) src/deploy_setup.rs
Code Duplication · Near-duplicate member pair (34 shared lines) src/commit.rs
Code Duplication · Members sharing a duplicated core (5 members, 50+ identical tokens) src/ai.rs
Code Duplication · Edited copy of a member (104 corresponding lines) src/deploy_setup.rs
Code Duplication · Edited copy of a member (143 corresponding lines) src/ai_everruns.rs
Code Duplication · Edited copy of a member (144 corresponding lines) src/ai.rs
Code Duplication · Edited copy of a member (100 corresponding lines) src/setup.rs
Code Duplication · Edited copy of a member (67 corresponding lines) src/sync_plan.rs
Code Duplication · Edited copy of a member (61 corresponding lines) src/code.rs
Code Duplication · Edited copy of a member (46 corresponding lines) src/codex_skill_eval.rs
Code Duplication · Edited copy of a member (77 corresponding lines) src/explain_commits.rs
Code Duplication · Edited copy of a member (68 corresponding lines) src/code.rs
Code Duplication · Edited copy of a member (65 corresponding lines) src/ai.rs
Code Duplication · Edited copies of one member (3 members, 38+ corresponding lines) src/server.rs
Code Duplication · Edited copy of a member (50 corresponding lines) src/ai.rs
Code Duplication · Edited copy of a member (50 corresponding lines) src/sync.rs
Code Duplication · Edited copy of a member (45 corresponding lines) src/commit.rs
Code Duplication · Edited copy of a member (97 corresponding lines) src/codex_telemetry.rs
Code Duplication · Edited copy of a member (48 corresponding lines) src/ai.rs
Code Duplication · Edited copy of a member (61 corresponding lines) src/sync.rs
Code Duplication · Edited copy of a member (67 corresponding lines) src/ai.rs
Code Duplication · Edited copy of a member (62 corresponding lines) src/ai.rs
Code Duplication · Edited copy of a member (40 corresponding lines) src/commit.rs
Code Duplication · Edited copy of a member (45 corresponding lines) src/macos.rs
Code Duplication · Edited copy of a member (42 corresponding lines) src/commit.rs
Code Duplication · Edited copy of a member (48 corresponding lines) src/skills.rs
Code Duplication · Edited copy of a member (46 corresponding lines) src/commits.rs
Code Duplication · Edited copy of a member (44 corresponding lines) src/commit.rs
Code Duplication · Edited copies of one member (3 members, 25+ corresponding lines) src/archive.rs
Code Duplication · Edited copy of a member (40 corresponding lines) src/ai.rs
Code Duplication · Edited copy of a member (37 corresponding lines) src/workflow.rs
Code Duplication · Edited copy of a member (30 corresponding lines) src/codex_runtime.rs
Code Duplication · Edited copies of one member (4 members, 20+ corresponding lines) src/ai.rs
Code Duplication · Edited copy of a member (31 corresponding lines) src/env.rs
Code Duplication · Edited copies of one member (3 members, 25+ corresponding lines) src/log_server.rs
Code Duplication · Edited copy of a member (26 corresponding lines) src/codex_memory.rs
Code Duplication · Edited copy of a member (30 corresponding lines) src/codex_skill_eval.rs
Code Duplication · Edited copy of a member (33 corresponding lines) src/recipe.rs
Code Duplication · Edited copy of a member (24 corresponding lines) src/home.rs
Code Duplication · Edited copies of one member (6 members, 29+ corresponding lines) src/agents.rs
Code Duplication · Edited copy of a member (27 corresponding lines) src/deps.rs
Code Duplication · Edited copy of a member (31 corresponding lines) src/ask.rs
Code Duplication · Edited copies of one member (3 members, 35+ corresponding lines) src/commit.rs
Code Duplication · Edited copy of a member (24 corresponding lines) src/ai_taskd.rs
Code Duplication · Edited copy of a member (22 corresponding lines) src/deps.rs
Code Duplication · Edited copy of a member (32 corresponding lines) src/ai.rs
Code Duplication · Edited copy of a member (26 corresponding lines) src/codex_session_docs.rs
Code Duplication · Edited copy of a member (32 corresponding lines) src/agents.rs
Code Duplication · Edited copy of a member (31 corresponding lines) src/agents.rs
Code Duplication · Edited copy of a member (29 corresponding lines) src/code.rs
Code Duplication · Edited copies of one member (3 members, 33+ corresponding lines) src/env.rs
Code Duplication · Edited copy of a member (33 corresponding lines) src/upgrade.rs
Code Duplication · Edited copy of a member (18 corresponding lines) src/ai_tasks.rs
Code Duplication · Edited copy of a member (27 corresponding lines) src/codex_runtime.rs
Code Duplication · Edited copy of a member (32 corresponding lines) src/commits.rs
Code Duplication · Edited copy of a member (42 corresponding lines) src/commit.rs
Code Duplication · Edited copy of a member (23 corresponding lines) src/env.rs
Code Duplication · Edited copy of a member (27 corresponding lines) src/ai.rs
Code Duplication · Edited copy of a member (21 corresponding lines) src/commit.rs
Code Duplication · Edited copy of a member (20 corresponding lines) src/code.rs
Code Duplication · Edited copy of a member (30 corresponding lines) src/env.rs
Code Duplication · Edited copy of a member (17 corresponding lines) src/todo.rs
Code Duplication · Edited copy of a member (31 corresponding lines) src/branches.rs
Code Duplication · Edited copies of one member (3 members, 22+ corresponding lines) src/deploy_setup.rs
Code Duplication · Edited copy of a member (25 corresponding lines) src/supervisor.rs
Code Duplication · Edited copy of a member (49 corresponding lines) src/commit.rs
Code Duplication · Edited copy of a member (19 corresponding lines) src/projects.rs
Code Duplication · Edited copy of a member (19 corresponding lines) src/jd.rs
Code Duplication · Edited copy of a member (30 corresponding lines) src/commit.rs
Code Duplication · Edited copies of one member (4 members, 22+ corresponding lines) src/commit.rs
Code Duplication · Edited copies of one member (3 members, 25+ corresponding lines) src/ai.rs
Code Duplication · Edited copy of a member (23 corresponding lines) src/commit.rs
Code Duplication · Edited copy of a member (29 corresponding lines) src/commit.rs
Code Duplication · Edited copy of a member (36 corresponding lines) src/codex_memory.rs
Code Duplication · Edited copy of a member (34 corresponding lines) src/gitignore_policy.rs
Code Duplication · Edited copy of a member (17 corresponding lines) src/usage.rs
Code Duplication · Edited copy of a member (20 corresponding lines) src/sync.rs
Code Duplication · Edited copies of one member (4 members, 25+ corresponding lines) src/env.rs
Code Duplication · Edited copy of a member (21 corresponding lines) src/deploy.rs
Code Duplication · Edited copy of a member (21 corresponding lines) src/otp.rs
Code Duplication · Edited copy of a member (18 corresponding lines) src/sync.rs
Code Duplication · Edited copy of a member (25 corresponding lines) src/config.rs
Code Duplication · Edited copy of a member (19 corresponding lines) src/updates.rs
Code Duplication · Edited copies of one member (3 members, 16+ corresponding lines) src/ai.rs
Code Duplication · Edited copy of a member (18 corresponding lines) src/ai.rs
Code Duplication · Edited copy of a member (26 corresponding lines) src/code.rs
Code Duplication · Edited copy of a member (19 corresponding lines) src/commit.rs
Code Duplication · Edited copy of a member (22 corresponding lines) src/commit.rs
Code Duplication · Edited copy of a member (23 corresponding lines) src/commit.rs
Code Duplication · Edited copies of one member (3 members, 25+ corresponding lines) src/commit.rs
Code Duplication · Edited copy of a member (15 corresponding lines) src/ai.rs
Code Duplication · Edited copy of a member (13 corresponding lines) src/sealer_crypto.rs
Code Duplication · Edited copy of a member (23 corresponding lines) src/changes.rs
Code Duplication · Edited copy of a member (12 corresponding lines) src/usage.rs
Code Duplication · Edited copy of a member (18 corresponding lines) src/codex_memory.rs
Code Duplication · Edited copy of a member (18 corresponding lines) src/features.rs
Code Duplication · Edited copy of a member (24 corresponding lines) src/hive.rs
Code Duplication · Edited copy of a member (16 corresponding lines) src/commits.rs
Code Duplication · Edited copy of a member (14 corresponding lines) src/git_guard.rs
We compare every finding with the previous survey's. A finding that has only moved to another line in the same file counts as the same finding, so only new findings appear here. Advisory notes from the AI model are left out, because the model words them afresh in every survey.
Fixed since the last survey: 161 findings
These 161 critical or serious findings were in the previous survey, on 26 October 2026, and are gone from this one. The first 100 are listed here.
€48,000 to €240,000, for 793 to 2,516 hours of work, about 1.0 person-years for 1 to 2 engineers
Difficulty of the problem
Standard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write.
Quality factor
×0.7 at a score of 40. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it.
Size
Large: 145,945 lines of product code
What it is not
Not a quotation: nobody has offered to build it for that. Not a valuation: it says nothing about what the business is worth. Not a certified figure: no professional has signed it as one.
How the estimate is made: We price the hours a team would need to write this code again, at €60 to €95 an hour. Declarations and boilerplate are priced at a fast rate and logic at a slower one, and the logic is then multiplied by the difficulty of the problem and by the quality factor. The estimate can be about 30% off either way, and it moves most with the hourly rate and the difficulty. For this code, every line is priced as straight logic, which keeps the estimate on the low side.
Top priorities
The three actions that raise the score most for the work they take. The full ranked list is in the Roadmap.
1
Resolve the 1 No ADRs found finding(s) in ADR Quality — start with Cargo.toml.
Raises the score by about 7 points · Low effort · ADR Quality
2
Resolve the 157 Orphaned file finding(s) in Knowledge Freshness — start with lib.rs (5), server.rs (2), trace.rs (2).
Protect endpoints by default-deny: a global authentication guard or middleware with explicit public opt-outs, or a guard on every route, plus named role/permission rules for what an authenticated caller may do.
Raises the score by about 7 points · Medium effort · Access Controls
Diagnosis: what the measurements show together
Each conclusion below combines several dimensions into one point that no single dimension shows, and lists the measurements it rests on.
Where the investment is most exposed · Value at risk
This code would cost about €140,000 to build again, about 1.0 person-years of work. Its weakest lens is Security and Compliance, at 28 (Weak). Security and Compliance is about how well the product is protected, and how it handles personal data. Because the weakest lens counts most in the score, work on Security and Compliance also moves the score most.
Based on: the rebuild estimate · the Security and Compliance grade · how much each lens counts
What to do: Start with the Security and Compliance actions in Top priorities.
If you do one thing first · First action
Resolve the 1 No ADRs found finding(s) in ADR Quality. Of all the actions in this report, it raises the score most for the work it takes: about 7 points for low effort, because it clears the 1 ADR Quality findings. The next survey will show the change in the score.
Based on: the ranked actions in Top priorities, by score gain and effort
What hard-to-read code costs each year · Cost
Four dimensions measure how easy the code is to work in: two measure how tangled its logic is, one how much of it is copied, and one how well each part sticks to a single job. In this codebase they average 5.4 out of 10. Code at that level is slower to change than clean code, and we estimate the extra work at 7% to 15% on every change. The history of the code shows how much it changes: about 159,326 lines over the last 90 days, which is about 646,155 lines a year. At that pace, the extra work comes to an estimated 105.5 to 633.2 engineer-days a year, and it grows as more code changes.
How this is estimated: The number of changed lines is measured from the history of the code. The rest rests on two assumptions of our own: code scoring 8 out of 10 or more adds no extra work, and each point below 8 adds 2.5% to 5.6% to every change, never less than 2% to 5% and never more than 40% to 60% in all; and an engineer changes 150 to 400 lines in a day. The result is a range for planning, not a measurement.
Based on: Cyclomatic Complexity · Cognitive Complexity · Code Duplication · Cohesion (LCOM4) · the code's change history
What to do: Start with the files listed under Churn × Complexity Hotspots, which change often and are hard to read, because that is where the extra work is paid most often.
Architecture — module dependency graph
Project dependencies, layered top-to-bottom; arrows show direction. Any dashed red edge points upward or sideways, which only happens where the projects form a dependency cycle. A graph without cycles has none.
Architecture: which parts of the code depend on which
The code is divided into modules, groups of code that each handle one part of the product, and a module depends on another when it uses code from it. The table lists the modules both down the side and across the top, in an order where each module should only use modules listed above it. A number in a cell means the module on that row uses the module in that column, and it counts the pairs of building blocks (types) that connect them. The one thing to look for is a mark above the diagonal line. It means two or more modules use each other in a loop (a dependency cycle), so none of them can be changed, tested or released on its own.
166 modules, with 204 dependencies between them. One loop runs through 8 of the modules, marked above the diagonal.
The table shows the 40 modules with the most connections; 126 more are left out to keep it readable.
Which modules use which. The module on each row uses the module in each column, and the number counts the pairs of types that connect them. A cell above the diagonal is part of a loop.
flowd.ai_taskd uses flowd.ai_tasks, so a change to flowd.ai_tasks can break flowd.ai_taskd, while a change to flowd.ai_taskd can't break flowd.ai_tasks.
Position
Below the diagonal: flowd.ai_taskd uses a module listed above it, which is the healthy direction.
flowd.codex_runtime uses flowd.config, so a change to flowd.config can break flowd.codex_runtime, while a change to flowd.codex_runtime can't break flowd.config.
Position
Below the diagonal: flowd.codex_runtime uses a module listed above it, which is the healthy direction.
flowd.cli uses flowd.bin.flow-workspace-bootstrap, so a change to flowd.bin.flow-workspace-bootstrap can break flowd.cli, while a change to flowd.cli can't break flowd.bin.flow-workspace-bootstrap.
Position
Below the diagonal: flowd.cli uses a module listed above it, which is the healthy direction.
flowd.project_snapshot uses flowd.ai_project_manifest, so a change to flowd.ai_project_manifest can break flowd.project_snapshot, while a change to flowd.project_snapshot can't break flowd.ai_project_manifest.
Position
Below the diagonal: flowd.project_snapshot uses a module listed above it, which is the healthy direction.
flowd.project_snapshot uses flowd.ai_tasks, so a change to flowd.ai_tasks can break flowd.project_snapshot, while a change to flowd.project_snapshot can't break flowd.ai_tasks.
Position
Below the diagonal: flowd.project_snapshot uses a module listed above it, which is the healthy direction.
flowd.project_snapshot uses flowd.discover, so a change to flowd.discover can break flowd.project_snapshot, while a change to flowd.project_snapshot can't break flowd.discover.
Position
Below the diagonal: flowd.project_snapshot uses a module listed above it, which is the healthy direction.
flowd.ai uses flowd.ai_project_manifest, so a change to flowd.ai_project_manifest can break flowd.ai, while a change to flowd.ai can't break flowd.ai_project_manifest.
Position
Below the diagonal: flowd.ai uses a module listed above it, which is the healthy direction.
flowd.ai_everruns uses opentui_lite, so a change to opentui_lite can break flowd.ai_everruns, while a change to flowd.ai_everruns can't break opentui_lite.
Position
Below the diagonal: flowd.ai_everruns uses a module listed above it, which is the healthy direction.
flowd.ai_everruns uses seq_everruns_bridge.maple, so a change to seq_everruns_bridge.maple can break flowd.ai_everruns, while a change to flowd.ai_everruns can't break seq_everruns_bridge.maple.
Position
Below the diagonal: flowd.ai_everruns uses a module listed above it, which is the healthy direction.
flowd.ai_everruns uses flowd.config, so a change to flowd.config can break flowd.ai_everruns, while a change to flowd.ai_everruns can't break flowd.config.
Position
Below the diagonal: flowd.ai_everruns uses a module listed above it, which is the healthy direction.
flowd.explain_commits uses flowd.config, so a change to flowd.config can break flowd.explain_commits, while a change to flowd.explain_commits can't break flowd.config.
Position
Below the diagonal: flowd.explain_commits uses a module listed above it, which is the healthy direction.
flowd.explain_commits uses flowd.cli, so a change to flowd.cli can break flowd.explain_commits, while a change to flowd.explain_commits can't break flowd.cli.
Position
Below the diagonal: flowd.explain_commits uses a module listed above it, which is the healthy direction.
flowd.jj uses flowd.bin.flow-workspace-bootstrap, so a change to flowd.bin.flow-workspace-bootstrap can break flowd.jj, while a change to flowd.jj can't break flowd.bin.flow-workspace-bootstrap.
Position
Below the diagonal: flowd.jj uses a module listed above it, which is the healthy direction.
flowd.log_server uses flowd.daemon_snapshot, so a change to flowd.daemon_snapshot can break flowd.log_server, while a change to flowd.log_server can't break flowd.daemon_snapshot.
Position
Below the diagonal: flowd.log_server uses a module listed above it, which is the healthy direction.
flowd.main uses flowd.bin.flow-workspace-bootstrap, so a change to flowd.bin.flow-workspace-bootstrap can break flowd.main, while a change to flowd.main can't break flowd.bin.flow-workspace-bootstrap.
Position
Below the diagonal: flowd.main uses a module listed above it, which is the healthy direction.
flowd.repo_capsule uses flowd.ai_project_manifest, so a change to flowd.ai_project_manifest can break flowd.repo_capsule, while a change to flowd.repo_capsule can't break flowd.ai_project_manifest.
Position
Below the diagonal: flowd.repo_capsule uses a module listed above it, which is the healthy direction.
flowd.server uses flowd.daemon_snapshot, so a change to flowd.daemon_snapshot can break flowd.server, while a change to flowd.server can't break flowd.daemon_snapshot.
Position
Below the diagonal: flowd.server uses a module listed above it, which is the healthy direction.
flowd.task_match uses flowd.discover, so a change to flowd.discover can break flowd.task_match, while a change to flowd.task_match can't break flowd.discover.
Position
Below the diagonal: flowd.task_match uses a module listed above it, which is the healthy direction.
flowd.codex_memory uses flowd.repo_capsule, so a change to flowd.repo_capsule can break flowd.codex_memory, while a change to flowd.codex_memory can't break flowd.repo_capsule.
Position
Below the diagonal: flowd.codex_memory uses a module listed above it, which is the healthy direction.
flowd.ops_overview uses flowd.activity_log, so a change to flowd.activity_log can break flowd.ops_overview, while a change to flowd.ops_overview can't break flowd.activity_log.
Position
Below the diagonal: flowd.ops_overview uses a module listed above it, which is the healthy direction.
flowd.ops_overview uses flowd.daemon_snapshot, so a change to flowd.daemon_snapshot can break flowd.ops_overview, while a change to flowd.ops_overview can't break flowd.daemon_snapshot.
Position
Below the diagonal: flowd.ops_overview uses a module listed above it, which is the healthy direction.
flowd.updates uses flowd.sync_plan, so a change to flowd.sync_plan can break flowd.updates, while a change to flowd.updates can't break flowd.sync_plan.
Position
Below the diagonal: flowd.updates uses a module listed above it, which is the healthy direction.
At a glance — Code Health · 68% · Adequate · gated by D2 ·
Findings mapped to OWASP categories; the specific CVEs/secrets are in the Security dimension cards below and findings.md (redacted only on the public version of this report).
OWASP category
Findings
Severity
A05:2025 — Injection
52
High / Critical
A03:2025 — Software Supply Chain Failures
44
High / Critical
Roadmap
Top priorities: Resolve the 1 No ADRs found finding(s) in ADR Quality — start with Cargo.toml; Resolve the 157 Orphaned file finding(s) in Knowledge Freshness — start with lib.rs (5), server.rs (2), trace.rs (2); Protect endpoints by default-deny: a global authentication guard or middleware with explicit public opt-outs, or a guard on every route, plus named role/permission rules for what an authenticated caller may do.
Ranked by impact ÷ effort. "Helps" is the estimated gain on the 0–100 health score.
Do this
Helps
Effort
Dimension
Resolve the 1 No ADRs found finding(s) in ADR Quality — start with Cargo.toml.
Protect endpoints by default-deny: a global authentication guard or middleware with explicit public opt-outs, or a guard on every route, plus named role/permission rules for what an authenticated caller may do.
Review each MD5/SHA1 use by what it protects: replace it with SHA-256+ (or a KDF for passwords) where the digest is security-relevant, and switch it to a non-cryptographic hash (xxhash, murmurhash) where it only derives an identifier such as a cache key. This repository constructs a collision-broken hash (MD5/SHA1) at 6 sites, not one: `src/commit.rs:10011` (`Sha1::new`), `src/commit.rs:13628` (`Sha1::new`), `src/commit.rs:13641` (`Sha1::new`), `src/pr_preview.rs:951` (`Sha1::new`), `src/pr_preview.rs:1634` (`Sha1::new`), `src/todo.rs:307` (`Sha1::new`). Each is a separate decision — fixing only the line this row cites leaves the others in place.
Reconcile the README with reality: docs/commands/readme.md links to `daemon.md`, but `docs/commands/daemon.md` does not exist; docs/commands/readme.md links to `parallel.md`, but `docs/commands/parallel.md` does not exist; docs/commands/readme.md links to `fixup.md`, but `docs/commands/fixup.md` does not exist; docs/commands/readme.md links to `run.md`, but `docs/commands/run.md` does not exist; docs/commands/readme.md links to `rerun.md`, but `docs/commands/rerun.md` does not exist.
Every finding carries one of four grades. Three say how serious it is. The fourth says this
survey could not settle it — and it is a grade, not a gap.
Critical — 65
A definite problem that already costs you something and drags the score down: a
missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here
tends to cause failures elsewhere.
Serious — 1385
Likely wrong, but not failing yet. It degrades
the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to
carry for two years either.
Minor — 323
Recorded, with no effect on how the codebase functions.
Present so the survey is complete, not because it needs doing.
Could not be resolved — 14
Something this survey could not settle
from the outside, and which could be critical or serious. Either a control was required and no
positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves
nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean
result. These are excluded from the score rather than awarded a pass, so the number on the cover neither
rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each
one is named under Limitations.
Methodology & how to trust this report
This survey is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. All 47 evaluated dimensions are computed by tools and static analysis; no language model sets or judges any of them. Overall confidence is 0.8, the weighted average across measured dimensions.
Every figure here is one of two kinds, and we label which: ✓ Measured — a deterministic fact (LoC, complexity, coverage); ~ Modeled — an estimate from a stated model (cost, effort, value-at-risk), always a range with its assumptions, never a precise fact. We never present a modelled estimate as if it were measured. Perfect or absent scores carry their provenance too (ADR-0011): ✓ Tool-verified means the property itself was measured across the surface; ○ Nothing flagged means the probes came back clean — a claim bounded by what a repository can show; ⊘ Not evidenced means a working control (a tested restore, an automated rollback) showed no positive evidence — absence of evidence is not evidence of a control, so it's excluded from the score rather than awarded a spurious 10.
What we checked — 47 dimensions across the health lenses
Each chip is a dimension scored from real signals across architecture, testing, dependencies, security & compliance, documentation, git-history and code quality — in one coherent pass. A surface report typically covers a handful.
How to trust any code-health report — three questions
Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 1748 of 1773 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line. (Every path in this report is repo-relative by construction: paths are normalized at the producer and the report is rejected if any rooted path leaks through.)
Is there a tool behind the number? Every score below names the method that produced it: Roslyn, git or a scanner, not a narrative.
Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.
This report answers yes to all three. That's the bar to hold any assessment to.
Tools & methods
The actual versions used this run (captured at analysis time) — re-run on the same commit for the identical score.
Method
Backs
Version
Evaluator
Roslyn static analysis
Complexity, cohesion, coupling, dead code, API surface, layering
What ran differently this time — a tool absent, degraded, or that fell back to an estimate. Named openly, not folded silently into the scores. A degraded run also records its exact cause in diagnostics.md.
D8 Code Coverage — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Coverage NOT MEASURED: the Rust half could not be measured — the Cargo suite in repository root did not build, so it was never run. Coverage is excluded from the score rather than counted as a near-zero. This is OUR limitation, not a defect in the repo.
D11 Test Reliability — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Test source is present (.rs, .ts) and this repository declares a Cargo test suite (repository root, 81 test files), but it was not re-run: no test result was produced. Not scored — this is a gap in the analyzer's language coverage, not a finding about this repository.
D14 License Compliance — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. This repository declares a Python REDACTED/requirements.txt (pip/uv/Poetry), but the licence verdict published here was taken over its crate dependencies. Nothing was read about its Python dependencies' licensing in either direction, and a clean score on this card must not be read as covering them.
D19 Documentation Quality — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. Each ecosystem's manifests (what makes a folder runnable or a published package) need their own proof before D19 judges its units. Until then those folders' READMEs are judged only as documents (boilerplate, structure), never counted as complete.
D19 Documentation Quality — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. This kind did not reach the 95 % precision gate in three adjudicated runs (docs/plans/deterministic-engine/adjudication/D19-sample3-v3.md), so by the pre-registered fallback it publishes no row until a re-measurement shows it does. The candidates are counted here, not reported as findings, and the score does not include them.
D22 Internal API Consistency — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D22's deterministic call-shape rules are gated on C# first (docs/plans/deterministic-engine.md, P5): each other language is switched on only after its own concept suite and A/B gate pass. This says nothing about whether that surface is consistent.
D24 Comment Value — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Each source language's comment syntax, and the code a comment annotates in it, needs its own proof before D24 judges it. Until then those comments are left unread, not counted as clean.
D27 Navigability — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Navigability is taken over call sites whose callee resolved. For C# that population includes calls into referenced assemblies; for this language only calls declared inside the repository count, so the abstention threshold reads the repository's use of its standard library as a resolution failure. That is a limit of this analyzer, not a build problem in this repository.
AXR1 Runtime accessibility — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Render strategy: boot via ToolchainServer (.). the service did not build — `cargo build --locked --bin 'flowd'` exited 101: warning: Cargo.toml: file `src/main.rs` found to be present in multiple build targets:
* `bin` target `f`
* `bin` target `flow`
warning: `flowd…; runtime evidence skipped (launch chosen because 'axum' dependency in Cargo.toml, binary 'flowd', started with its 'server' subcommand).
GD1 Unfinished & placeholder code — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, F#, JavaScript/TypeScript, Dart, Ruby and Scala source only, and no C#, F#, JavaScript/TypeScript, Dart, Ruby or Scala was found, and this repository's Python, Rust is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
IC1 Incompleteness & stubs — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, JavaScript/TypeScript, Java, Dart, Ruby and Scala source only, and no C#, JavaScript/TypeScript, Java, Dart, Ruby or Scala was found, and this repository's Python, Rust is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
M4 Documentation accuracy — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. M4 checks only the claim kinds adjudicated at or above 95 % precision: links and versions (PREREGISTRATION version 9), and artefact counts an order of magnitude off. Paths, command arguments, installs, environment variables, settings, projects, packages, routes, cd targets, infrastructure products and removed modules are read but not checked, and none of them is reported or counted.
X12 Unreachable branch — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check's reader does not cover most of the languages this repository's product is written in. What it read is kept, but it is too small a share to grade the product by. That is a gap in this analyzer's language reach — not a finding about this repository.
X16 Unfloored truncation loop — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, PHP, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Java, PHP, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X18 Disposal-pattern correctness — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Dart, Ruby, Scala and PHP source only, and no C# was loaded and no JavaScript/TypeScript, Java, Kotlin, Dart, Ruby, Scala or PHP was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X3 Exception handling — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check's reader does not cover most of the languages this repository's product is written in. What it read is kept, but it is too small a share to grade the product by. That is a gap in this analyzer's language reach — not a finding about this repository.
X4 Structured logging — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. 1 further occurrence(s) are not listed individually; the score already reflects all 41.
X5 Nullable reference types — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax and MSBuild project configuration, TypeScript source and its tsconfig files, Java source and its package and module declarations, PHP source and its PHPStan and Psalm configuration, Dart source and its pubspec language version, Ruby source and its Sorbet and Steep configuration, Scala source and its build's explicit-nulls, WartRemover and Scalafix settings, and Kotlin source only, and no C# was loaded, no TypeScript was found, and this repository's Python, Rust is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
Repo exclusion declarations (.gitattributes linguist-generated/vendored, .editorconfig generated_code): none declared — every source file was scored.
Limitations & what we did not check
We assess the repository exactly as committed, and only the repository. By design we do not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.
Per-dimension blind spots
For each dimension that was measured, what a static, repo-only scan structurally cannot see — the honest edge of the measurement, not a failure of it.
D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
D5 Coupling: Coupling is measured between projects/assemblies — runtime coupling through DI, reflection, messaging or shared databases is invisible to a static reference graph.
D6 Cohesion (LCOM4): LCOM4 cohesion is syntactic — it infers connectivity from which methods touch which fields/methods by name, not from real runtime behaviour or intent.
D12 Dependency Hygiene: Dependency health reads manifests and lockfiles — a vulnerability in a vendored/copied dependency, or risk from how a dependency is actually used, is outside this view.
D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
D14 License Compliance: License compatibility is checked against declared package metadata and a policy — mislabelled or missing license metadata, and obligations that depend on how you distribute, are not resolved here.
D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
D19 Documentation Quality: Documentation quality publishes two things only: a runnable or packaged unit with no example, and a multi-project root README that maps none of its parts. It does not judge clarity, and its other checks (overview, licence, boilerplate, structure, empty sections, XML-doc coverage) are withheld after adjudication: their candidates are counted in the card's gaps, not shown as rows. A false statement in a document is M4's; units are .NET projects only.
D20 ADR Quality: ADR quality checks the structure of the decision records present: it cannot know about decisions made and never recorded, and it does not judge how well a record argues its case. Records in a language the section lexicon does not cover are not evaluated.
D26 Project Cohesion: Project focus is sized from members/namespaces per project — a project that is broad by deliberate design reads the same as one that has sprawled.
D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
D44 Platform End-of-Life: The support table is FROZEN, so it goes out of date by losing RECALL: a release that ended support after the table was written is missed until the table is refreshed, and this dimension reading 10 is not evidence that a platform is current. Only platforms the repository DECLARES in a place this pass reads are seen — a runtime named only in a Dockerfile (D31's subject), in a CI workflow (D29's), or in a file this pass does not parse (go.mod, a Gemfile ruby directive) is invisible here, which is why a repository declaring none of them abstains rather than scoring. Only frameworks with a PUBLISHED support policy are tracked: React, Flask and Express publish none, so their age cannot be judged and their absence from a report is not a statement that they are supported.
AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
AX9 CQS / query purity: Handlers are found by interface/name convention — a query handler using neither is not seen. Mutation is a resolved write/publish invocation (SaveChanges/repository/bus), so a write hidden behind a hand-rolled wrapper, reflection, or a string-keyed service locator resolves to a non-persistence type and isn't flagged; it detects that a query writes state, not whether the write is a legitimate read-side cache update. Clean means "no resolved write/publish in a query body", not a proof of CQS purity.
DM4 Rich vs anemic domain model: Behaviour is detected as state mutation inside a method body — a method that enforces an invariant by validating-and-throwing without mutating reads as a query, and mutation delegated through an interface the scan can't resolve isn't credited; entities with zero public properties still drop out of the population. It detects that state changes, not whether the rule is correct.
M4 Documentation accuracy: Documentation accuracy checks links, versions and artefact counts against the tree: other claims (paths, commands, settings, routes) are read but not checked, and it cannot run the onboarding or measure how long a real new joiner takes.
P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".
P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.
What it measures: How tangled the control flow is — methods with many branches are hard to test and change.
Method: Cyclomatic complexity per method (1 + decision points), computed exhaustively across production source; test projects separated by convention. Deterministic.
106 method(s) exceeded the cyclomatic complexity threshold of 15; the worst was flowd::main at 158. A further 4 method(s) were over the threshold but excluded as flat dispatchers (a long switch/match over independent cases: many branches, almost no nesting), the largest being flowd::ai::run_provider at 53 — they are counted neither in the figure above nor in this dimension's score. 2 files carry no cyclomatic complexity row at all for this reason — every one of their over-threshold functions was excluded, so the exclusion is disclosed nowhere in the file itself: src/proxy/trace.rs (Method::from at 19), crates/seq_everruns_bridge/src/lib.rs (seq_everruns_bridge::map_tool_name_to_seq_op at 16). They are named here because the per-file figures other dimensions report are taken BEFORE this exclusion, so such a file can show a high maximum complexity elsewhere in this report and nothing here, with nothing to reconcile the two.
Bring the 1 body over 120 down to 120 or less in Cyclomatic Complexity — start with flowd::main (cyclomatic 158). — Refactoring it lifts Cyclomatic Complexity from 5.5 to about 5.8/10.
Detailed fixes: d1_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: How hard the code is for a person to follow, beyond raw branching.
Method: Cognitive complexity per method (Sonar-style nesting-penalized score), computed exhaustively over production code, excluding test projects. Deterministic.
+ 1 more group(s) — more in Appendix A; the complete list is findings.md.
What to do
Bring the 4 bodies over 120 down to 120 or less in Cognitive Complexity — start with flowd::sync::run_sync (cognitive 227), flowd::sync::run_jj_sync (cognitive 227), flowd::commit::run_with_check_sync (cognitive 180). — This score is capped by its worst body, so a finding fixed alone moves it by almost nothing — the next one down takes its place. Refactoring these 4 together lifts Cognitive Complexity from 2.0 to about 2.6/10, projected with the scoring formula itself and assuming each lands exactly at 120; a cleaner split scores higher.
Detailed fixes: d2_recommendation.md · top locations in Appendix A, every location in findings.md.
Do you agree with this assessment?
D3 · God Classes8.2 / 10Strong✓ Tool-verified
What it measures: Over-large classes that try to do too much ("god classes").
Method: God-class detection by line and method-count thresholds per logical type (partial classes unified), filtered for generated code and registration/contract false positives. Deterministic.
Resolve the 52 FunctionTooLong finding(s) in God Classes — start with ai.rs (14), sync.rs (4), tasks.rs (4). — One of this dimension's main actionable groups (52 warning-level).
Resolve the 47 FileTooLong finding(s) in God Classes — start with ai.rs, commit.rs, sync.rs. — One of this dimension's main actionable groups (47 warning-level).
Resolve the 3 TooManyFields finding(s) in God Classes — start with config.rs, ai.rs, codex_session_docs.rs. — One of this dimension's main actionable groups (3 warning-level).
Detailed fixes: d3_recommendation.md · top locations in Appendix A, every location in findings.md.
Do you agree with this assessment?
D4 · Code Duplication4.3 / 10Weak✓ Tool-verified
What it measures: How much of the production code is copy-pasted: the share of production lines inside a reported copy (every copy of a duplicated block or of an edited member, each line once), 10 at none and 0 at a quarter of the lines.
Method: Code duplication via token-stream sliding windows with type-aware normalization (locals masked, type names preserved), scored on the share of production lines inside a reported copy (each line once; 10 at none, 0 at a quarter). Deterministic.
547 duplicated block group(s) detected. 14.3 % of the production lines (20,898 of 145,945) are in a reported copy. A further 275 rows report members as variants of one another; the share counts each copied line once, however many rows cite it. 17 of the 822 are in trees this repository does not ship — vendored, example/demo, project-template, fixture and benchmark code — and are ranked below the shipped groups rather than excluded from them: the duplication there is real and is still counted in this dimension's score. The dimensions that publish a production-file census leave those trees out of theirs, so this count is deliberately drawn over the wider population.
+ 225 more group(s) — more in Appendix A; the complete list is findings.md.
What to do
Resolve the 50 Duplicated block (9 lines × 2) finding(s) in Code Duplication — start with commit.rs (7), deploy.rs (4), ai.rs (3). — One of this dimension's main actionable groups (50 warning-level).
Resolve the 37 Duplicated block (10 lines × 2) finding(s) in Code Duplication — start with commit.rs (7), ai.rs (4), sync_plan.rs (3). — One of this dimension's main actionable groups (37 warning-level).
Resolve the 36 Duplicated block (6 lines × 2) finding(s) in Code Duplication — start with commit.rs (4), ai.rs (3), bench-ai-runtime.py (3). — One of this dimension's main actionable groups (36 warning-level).
Detailed fixes: d4_recommendation.md · top locations in Appendix A, every location in findings.md.
Do you agree with this assessment?
D5 · Coupling7.7 / 10Strong✓ Tool-verified
What it measures: Whether volatile projects sit underneath others that depend on them (so their churn ripples upward), and whether project dependencies form cycles. A widely-depended-on but stable shared/kernel project is healthy, not penalised.
Method: Dependency cycles via elementary-DFS over real .csproj references, plus Martin instability (afferent/efferent) per project. Exhaustive over the reference graph, deterministic.
Coverage: Exhaustive · type-level: afferent/efferent coupling + cycles computed over every production type — the population is all types, not a name convention.
7 production modules (Cargo+Python), 0 dependency cycle(s), 0 unstable depended-on module(s). Read from the build's own module declarations; 2 module(s) off the main sequence, with abstractness counted on 4 of the 7 (the rest declare no modelled class or interface, export only macros, declare types in source no model reads, or have no source directory of their own).
Off the main sequence: opentui-lite · ×2
What to do
Resolve the 2 Off the main sequence finding(s) in Coupling. — One of this dimension's main actionable groups (2 warning-level).
Detailed fixes: d5_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: Whether a class's methods are focused on a single responsibility.
Method: LCOM4 cohesion per production class with at least two methods: connected components of methods sharing state or calls, computed syntactically. Deterministic, not a proxy.
Coverage: Exhaustive · type-level: LCOM4 cohesion computed over every production class — the population is all types, not a name convention.
What it measures: Whether dependencies are current, not deprecated, and not bloated. Known vulnerabilities are D30's.
Method: Manifest scan via dotnet list package across all projects; worst-signal-per-package deduction (capped-linear for deprecation, prerelease and outdated) per KLoC. Known-vulnerable packages are D30's and are not charged here (rubric-2026.11.2). Exhaustive.
12 outdated, 0 yanked direct Cargo dependencies. 22 of 48 direct crates were graded against crates.io (0 not published there, 26 not resolved by a committed REDACTED). Only DIRECT edges are graded: a transitive crate cannot be moved past what its parent's requirement admits, so reporting one would be advice its owner cannot take. A newer release is reported only where this repository's OWN requirement already admits it, so the remedy is `cargo update` and never a manifest edit — which means a release outside the declared range is deliberately NOT charged, because a written-down constraint is a decision rather than a defect. Note that a bare requirement is a CARET, and for a 0.x crate its ceiling is the minor. Whether any crate is UNMAINTAINED is not graded — crates.io publishes no maintenance status, and release age does not stand in for one. Known CVEs in this dependency graph are D30's question, read from REDACTED there.
Outdated: anyhow · ×12
Detailed fixes: d12_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: Whether any secrets (keys, tokens, passwords) have leaked into the code.
Method: In-process native secret scanner (entropy plus signature patterns) across all tracked files; no external tool. A clean result is a measured 10, not no-data zero. Deterministic.
What it measures: Whether the licenses of third-party packages are compatible with your policy.
Method: Third-party package licenses resolved from declared package metadata and checked against the configured policy (allow/deny/copyleft). Deterministic; clean = no incompatible license found at metadata depth.
0 of 388 shipped crate(s) use a banned license. Licences were resolved from crates.io over the crates a consumer compiles — this repository's REDACTED closed over its manifests' `[dependencies]` and `[build-dependencies]`. Crates it asks for ONLY under `[dev-dependencies]` are excluded: they are not compiled by anything that depends on this repository. ★ COVERAGE OF THIS VERDICT: it grades this repository's crate dependencies and nothing else. The repository also declares a Python REDACTED/requirements.txt (pip/uv/Poetry), and the licences of those dependencies were NOT read by this pass — a gap in this engine's coverage, not a statement about them. So this result says the graded closure carries no banned licence; it does NOT say this repository's licensing is clear.
What it measures: Files that change often and are also complex — the riskiest hotspots.
Method: Per production file churn times cyclomatic complexity over a rolling window, computed from git and Roslyn/JS/Razor analysis. Exhaustive, deterministic per commit date.
Top hotspots: src/main.rs (36×158=5688); src/commit.rs (37×95=3515); src/sync.rs (32×100=3200)
Hotspot: src/main.rs · ×15src/main.rs:44
What to do
Resolve the 15 Hotspot finding(s) in Churn × Complexity Hotspots — start with main.rs, commit.rs, sync.rs. — One of this dimension's main actionable groups (15 warning-level).
Detailed fixes: d15_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: Acknowledged debt left in the code — TODOs, dead code, suppressed warnings.
Method: Roslyn syntactic debt markers (suppressions/TODO/FIXME/HACK/empty-catch/commented-code/Obsolete) plus SymbolFinder dead-code analysis; weighted-debt-per-KLoC density deducted 2.0x per unit. Deterministic, exhaustive.
8 deducted task-comment markers across 145945 LoC (0.0/KLoC) → score 10.0. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.
TodoComment · ×8src/cli.rs:2142
What to do
Resolve the 8 TodoComment finding(s) in Explicit Debt — start with cli.rs (6), commit.rs, tools.rs. — One of this dimension's main actionable groups (8 warning-level).
Detailed fixes: d17_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: Whether the project's documentation is clear, complete, and useful.
Method: Every README, docs/ document and root guide parsed by its markup and measured in Unicode letters. Published: a runnable or packaged .NET project whose README (or a document it links, or a root guide) shows no example, and a root README naming none of three or more projects. Overview, licence, boilerplate, wall-of-text, empty-section and XML-doc rows are measured and withheld (counted in gaps) after adjudication. Deterministic, exhaustive, advisory.
1 of 1 documentation facets pass in full. 109 document(s) read across 1 unit(s).
✓ On the Gold path — maintain.
Detailed fixes: d19_recommendation.md.
Do you agree with this assessment?
D20 · ADR Quality0.0 / 10Critical✓ Tool-verified
What it measures: Whether architecture decisions are recorded well (context, decision, consequences).
Method: Every ADR read by its section structure: nine located rules (a missing Decision, Context or Consequences section, a stale status, two records deciding the same question, a dangling supersede link, a number-only title, a single option, no named cost, no status where the log uses one, no enforcement field where the log adopted one), each a fixed deduction from 10; the score is the mean over evaluated records. Deterministic, no model. Advisory.
Resolve the 1 No ADRs found finding(s) in ADR Quality — start with Cargo.toml. — One of this dimension's main actionable groups (1 recommendation-level).
Detailed fixes: d20_recommendation.md · top locations in Appendix A, every location in findings.md.
1 of 6 build units (Cargo) flagged as possibly oversized/incoherent.
Projects may be oversized for their cohesion
What to do
Resolve the 1 Projects may be oversized for their cohesion finding(s) in Project Cohesion. — One of this dimension's main actionable groups (1 recommendation-level).
Detailed fixes: d26_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: Whether any secrets were ever committed — scanned across the full git history, not just now.
Method: Secret scan via TWO gitleaks detect passes in an isolated checkout — the full git history, then a second --no-git pass over the working tree as it stands — merged and de-duplicated by (rule, file, line); each match flagged High. Both invocations are recorded in the audit trail. Exhaustive; when the tool is absent, or when its output cannot be parsed into the expected shape, the dimension is WITHHELD as an explicit measurement gap on our side — unscored and excluded from the lens, never a hedged middling score.
What it measures: Real static-analysis (SAST) findings — likely security bugs in the code, any language.
Method: Polyglot static analysis via semgrep across the repo using the pinned, image-baked p/security-audit + p/owasp-top-ten rulesets (no scan-time registry fetch); severity rules (ERROR/WARNING/INFO) map to a full-band severity-weighted score. Exhaustive, deterministic; degrades on parse failure.
Coverage: semgrep pattern rules over all files — exhaustive for the rule set, blind to classes of bug without a rule (clean = no rule matched).
52 finding(s): 0 critical, 50 high, 2 medium, 0 low. 43 unpinned-GitHub-Actions row(s) are reported here but scored by D36 (supply-chain provenance), which measures that posture as `pinned_actions` — one pinning decision is charged once, not once per lens. semgrep hit a parse error in 2 file(s) — `REDACTED` (lines 106–124, line 682), `scripts/myflow-commit-session-smoke.sh` (line 237) — so no absence of findings in the named regions is evidence of anything; rows reported elsewhere in those files are real. Fix the syntax error (or exclude the file deliberately) and re-scan to cover them. Separately, one or more rules could not re-parse an embedded snippet in 3 file(s) (e.g. a workflow `run:` block read as shell). Those files WERE scanned and their other rows are unaffected; only those rules' view of those snippets is missing.
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
+ 1 more group(s) — more in Appendix A; the complete list is findings.md.
What to do
Resolve the 4 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED (3), REDACTED. — One of this dimension's main actionable groups (4 issue-level).
Resolve the 2 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED, REDACTED. — One of this dimension's main actionable groups (2 issue-level).
No action in Static Analysis (SAST) — all 43 REDACTED finding(s) are reported here at file:line but scored by D36 (supply-chain provenance), so none is charged to this dimension. — One of this dimension's main actionable groups (43 issue-level, 0 of them charged here).
Detailed fixes: d29_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: Whether any dependency has a known published vulnerability (CVE), direct or transitive, in ANY ecosystem the repository declares — Dart pub, Elixir and Erlang via Hex, Go modules, Java and Kotlin via Maven/Gradle, JavaScript/npm, .NET/NuGet, PHP/Composer, Python/PyPI, RubyGems, Rust/Cargo and Swift.
Method: Dependency-CVE scan across every ecosystem the repository declares, scored ONCE. Three sources are unioned and deduplicated by advisory identity (rule id + alias closure, CVE<->GHSA) scoped to package+version, keeping the worst severity: `osv-scanner --recursive` over osv.dev for Dart pub, Elixir/Hex (and Erlang, whose `rebar.lock` syft first converts to a CycloneDX SBOM the scanner reads, with rows attributed back to the lock), Go, Java and Kotlin via Maven/Gradle (and Scala, whose sbt build's pinned direct declarations are written into a CycloneDX SBOM the scanner reads, with rows attributed back to the build file), npm, PHP/Composer, Python/PyPI, RubyGems, Rust/Cargo and Swift; `trivy fs --scanners vuln` for npm lockfiles; and `dotnet list package --vulnerable --include-transitive` for NuGet (with per-advisory collapse of the project x target-framework fan-out), plus a DECLARED-dependency arm that resolves a published gem's gemspec against rubygems.org where no Gemfile.lock is committed. `SeverityScore(c,h,m,l, normalizer 8.0)`. NotApplicable only when NO ecosystem is readable; if any applicable ecosystem could not be scanned the findings are REPORTED and the score is withheld. Supersedes the npm and OSV arms, retired 2026-09-05. Advisory since rubric-2026.11.2 (CAI decision 0006): every row is a match against a vulnerability database that changes daily, so the reading is shown and never moves a scored dimension, lens or the headline.
+ 4 more group(s) — more in Appendix A; the complete list is findings.md.
What to do
Resolve the 9 High CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (7), REDACTED (2). — One of this dimension's main actionable groups (9 issue-level).
Resolve the 3 Critical CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (3). — One of this dimension's main actionable groups (3 issue-level).
Resolve the 2 High vulnerability finding(s) in Dependency Vulnerabilities — start with REDACTED, REDACTED. — One of this dimension's main actionable groups (2 issue-level).
Detailed fixes: d30_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: Whether anyone still has living knowledge of each file, or it has been orphaned — last understood long ago by someone now gone quiet. The sibling of the bus factor: D16 asks who owns it, D34 asks whether anyone still knows it.
Method: File orphaning as total living-knowledge decay below one focused-commit's worth within a year, computed per-file from the D16 decay model. Exhaustive, deterministic over fixed history.
160 of 160 significant source file(s) are orphaned — their living knowledge has decayed to nothing, so no one currently understands them. The largest is src/ai.rs. Counted over 160 of the 175 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.
Orphaned file · ×157src/cli.rs:1
Most significant orphaned file · ×3src/ai.rs:1
Dormant codebase
What to do
Resolve the 157 Orphaned file finding(s) in Knowledge Freshness — start with lib.rs (5), server.rs (2), trace.rs (2). — One of this dimension's main actionable groups (157 recommendation-level).
Resolve the 3 Most significant orphaned file finding(s) in Knowledge Freshness — start with ai.rs, commit.rs, sync.rs. — One of this dimension's main actionable groups (3 recommendation-level).
Resolve the 1 Dormant codebase finding(s) in Knowledge Freshness. — One of this dimension's main actionable groups (1 recommendation-level).
Detailed fixes: d34_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: Whether files that change together actually belong together — pairs that repeatedly co-change in git history despite having no explicit code dependency, surfacing the hidden/logical coupling (and boundaries in the wrong place) a static scan can't see.
Method: Pairwise co-occurrence over the per-commit file sets in git history (production source only — tests and generated dropped): Degree-of-Coupling = shared ÷ min individual revisions, reported above noise floors (each file ≥10 revisions, ≥5 shared commits, ≥50% strength); sweeping commits excluded. Deterministic over fixed history.
Coverage: Population: PRODUCTION source files only — test and generated files are dropped before pairing, so a class co-changing with its own test (trivially ~100%) can't drown the real production↔production coupling. Pairs ranked by Degree-of-Coupling. A non-source file is never a coupling PARTICIPANT either: documentation, schemas, config and data files are dropped with the rest, so a code↔docs pair — a command and the reference page that restates it — is not reported however strongly the two co-change; nor is coupling that runs THROUGH a build step or config file.
What it measures: Whether the build pipeline provides supply-chain integrity — generated provenance/attestation, signed artifacts (cosign/sigstore), an SBOM, and pinned build actions. Presence of the configuration, not a runtime guarantee.
Method: Supply-chain provenance/signing read deterministically from CI/build config (.github/workflows, .gitlab-ci.yml, azure-pipelines, Jenkinsfile, .circleci) + the release surface: four signals — generated provenance/attestation (SLSA/in-toto/actions-attest), artifact signing (cosign/sigstore/gitsign), an SBOM (syft/sbom-action/*.spdx.json/*.cdx.json), and SHA-pinned build actions — scored 10·present/denom. NotApplicable without a build pipeline. Detects configuration presence, not runtime enforcement.
Resolve the 2 REDACTED finding(s) in Supply-chain Provenance & Signing — start with REDACTED, REDACTED. — One of this dimension's main actionable groups (2 warning-level).
Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 warning-level).
Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 recommendation-level).
Detailed fixes: d36_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: Whether any dependency the repository declares is published as MALICIOUS rather than merely vulnerable — a package that is an attacker's work, in any ecosystem osv-scanner reads. Reported apart from D30 because the answer is binary: there is no safe version to upgrade to, and the fix is to remove the package and rotate every credential it could have read.
Method: The same dependency scan D30 reads, partitioned on the scanner's own classification rather than rescanned: a row is MALICIOUS when its id is in the `MAL-` space (the ossf/malicious-packages feed) OR its `database_specific.cwe_ids` carries `CWE-506` ("Embedded Malicious Code"). Both channels are structural; the summary text is deliberately NOT read, because a malicious-package record whose summary says only "Critical severity vulnerability" is a real shape ([GHSA redacted]) and a text matcher misses it. Scored BINARY: any surviving row is 0, whatever its severity and however many CVEs sit beside it — a hostile dependency is not a quantity. Applicability and degradation are D30's: NotApplicable only when no ecosystem is readable, and an unscannable ecosystem degrades rather than reading clean. Advisory since rubric-2026.11.2 (CAI decision 0006): the malicious-package feed is a database that changes daily, so the reading is shown and never moves a scored dimension, lens or the headline.
What it measures: Whether anyone still ships security patches for the platform this repository RUNS ON — the runtime it pins and the framework majors its own constraints hold it to. Separate from D12 because the question differs: a current Django on an end-of-life Python is perfectly up to date and completely unsupported, and the fix is a migration rather than a version bump. What the repository says it merely SUPPORTS is never charged.
Method: End-of-life PLATFORM read from the repository's own declarations and graded against a FROZEN, dated table of vendor support dates — no network, no feed, no API, so this dimension answers identically inside a closed scan fence. Two subjects: a RUNTIME the project pins (a single or all-end-of-life TargetFramework, a .nvmrc or .python-version, a requires-python CAP) and a FRAMEWORK major a dependency constraint cannot move off (a caret, tilde or exact version; `vue@^2.7.16` pins Vue 2). A FLOOR is deliberately never charged — `requires-python = ">=3.8"` states what a package SUPPORTS, not what it runs on — and a multi-target project is charged only when EVERY target is out of support. Runtime 4.0/product capped 8.0, framework 1.5 capped 4.5. The table is safe to freeze because a statement about support that ended in the past cannot become false: it loses recall as it ages, never precision, and a test asserts every entry predates the freeze date. Disjoint from D31 (a container image's OS layer) and D29 (the toolchain a CI workflow installs). Abstains when the repository declares no platform this pass reads — never scores it clean.
0 end-of-life runtime(s) and 0 end-of-life framework(s), read from 1 platform declaration(s) and 2 dependency declaration(s). This dimension reads what the repository says about ITSELF — a pinned target framework, a version file, a capped requires-python, a Rust toolchain pin, a framework major a constraint cannot move off. A FLOOR is deliberately never charged: `requires-python = ">=3.8"` states what the package SUPPORTS, not what it runs on, and a well-maintained library declares exactly that while running its own CI on a current release. The end-of-life facts are FROZEN and dated, so this dimension needs no network and answers identically inside a closed scan fence; as the table ages it loses recall and never precision, because a statement about support that ended in the past cannot become false. The OS layer of a container image is D31's question and the toolchain a CI workflow installs is D29's; this row is neither.
Other · Architecture — How the codebase splits by code ROLE — domain, application, infrastructure, test, generated. The significance map behind the knowledge/coupling weighting, and a DDD signal in its own right: a thin domain core under fat infrastructure is the anemic-domain smell, quantified. How each file's role is decided, because the split is only as good as that: a generated name or a build-output tree makes it Generated, a test project makes it Test, and otherwise the file's NAMESPACE and PATH words are matched against fixed vocabularies in a fixed ORDER — domain, then infrastructure, then application — so a file whose words hit two layers is counted under the earlier one. A production file matching none of them counts as application, so that share reads 'application or unclassified' rather than a measured application layer. Roles come from naming convention, never from what the code does. On this repository the split was taken from the source tree on disk rather than from a loaded .NET workspace, so a file's role is decided by its PATH segments alone — no declared namespace was available to add to the evidence — and generated output is excluded from the census entirely rather than counted as a generated share.
Method: Roslyn line-count by code ROLE: every source file classified Domain/Application/Infrastructure/Test/Generated by namespace + path convention (the shared CodeRoleClassifier), then significant lines summed per role. Deterministic; the advisory score is the business-logic (domain+application) share of production code.
Coverage: Population: ALL source files, each bucketed into ONE of five roles (Domain/Application/Infrastructure/Test/Generated) by namespace + path convention — a file whose layer isn't named in the convention falls to Application (the neutral default), and the split is line-count, not semantic depth or business value.
Other · Architecture — Whether the project-reference graph is acyclic (cycles block independent build/deploy and signal eroding boundaries).
Method: Project reference cycles via elementary-DFS over real .csproj references, using the engine shared with D5/D7; cyclic versus acyclic. Exhaustive, deterministic.
Other · Architecture — Whether dependencies point inward (Domain ← Application ← Infrastructure/Web) — the clean-architecture dependency rule, checked across the project graph.
Method: Layer violations by name-segment inference (Domain/Core to Application to Infrastructure/Web) over the project-reference graph. Exhaustive over all projects, deterministic.
Other · Architecture — Whether read (query) handlers stay side-effect-free — a query that writes persistent state or raises events breaks CQS and makes reads unsafe to retry, cache, or route to a read replica.
Method: Roslyn scan: CQRS handlers classified query-vs-command by interface (IQueryHandler/ICommandHandler/IRequestHandler<TQuery,TResult>) and name convention (*Query/Get*/Find* vs *Command); each query handler's body checked for persistent-state writes (SaveChanges/repository Add-Update) or event publishes by resolved invocation. Deterministic, type-level, exhaustive over the detected handlers.
Coverage: Population: CQRS handlers identified by IQueryHandler/ICommandHandler/IRequestHandler interface + *Query/Get*/Find*/*Command NAME convention; query purity then checked exhaustively within that set — a query handler using neither convention is invisible, and mutation is a resolved persistence/publish CALL, not full dataflow.
Other · Security — Whether access is authorized by default — a framework authorization attribute/decorator or policy, or imperative guard methods (throw-on-violation) called from handlers.
Method: Roslyn scan: [Authorize] usage and authorization policies, plus imperative throw-on-violation guard methods detected via syntax. Deterministic.
This repository serves requests — a server (axum::serve) (src/log_server.rs:203) — and no route guard, auth-gate middleware, global guard or imperative check that refuses a caller (401/403, an Unauthorized/Forbidden error) was found: its endpoints may be unprotected. — src/log_server.rs:203
What to do
Protect endpoints by default-deny: a global authentication guard or middleware with explicit public opt-outs, or a guard on every route, plus named role/permission rules for what an authenticated caller may do.
Do you agree with this assessment?
DM4 · Rich vs anemic domain model10.0 / 10Exemplary✓ Tool-verified
Other · Domain Modelling — Whether domain entities own their behaviour (invariant-enforcing commands) rather than being data-only structs driven by a foreign service.
Method: Roslyn (DDD-gated): entity method BODIES classified mutator-vs-query — only methods that mutate the entity's own declared state count as invariant-protecting behaviour, so a getter/passthrough doesn't rescue an anemic class. Deterministic, exhaustive over domain-layer entities.
Coverage: Population: entities by name/base convention; rich-vs-anemic judged by classifying each method body mutator-vs-query — logic-bearing domain types outside the convention are invisible.
Other · Event Sourcing — Whether domain events stay immutable (private fields, set once) rather than carrying mutable state.
Method: Roslyn scan (event-sourcing gated): persisted events checked for public setters; immutability verified per property/field. Deterministic, hard fact.
Maturity · Maturity — Whether the repository and its projects have a README, and whether it is substantive.
Method: Filesystem scan: README presence, word count, and headings for depth; git history for staleness. Exhaustive across root and project dirs, deterministic.
What to do
Explain in the README how to run the tests. Add a section called Testing to the README in the repository's top folder, saying how to run the test suite.
Maturity · Maturity — Whether key decisions (ADRs) and the high-level shape (C4/diagrams) are written down.
Method: Filesystem scan: ADR folder/naming conventions or content, plus Mermaid/PlantUML/C4/architecture.md discovery. Exhaustive, deterministic.
No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
What to do
Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
Maturity · Maturity — Whether the repository is organised deliberately: production code and tests are set apart in a way its ecosystem or the repository itself declares.
Method: Filesystem scan: src/test folder separation and namespace-prefix consistency (majority RootNamespace agreement). Exhaustive across projects, deterministic.
Maturity · Maturity — Whether the project's current-state documentation describes the code that exists.
Method: Every current-state document's checkable claims looked up in the tree (links, versions, and artefact counts an order of magnitude off), plus two README checks: an advertised infrastructure product with no footprint, and a module the CHANGELOG records as removed. Deterministic, no model. Advisory.
docs/commands/readme.md links to `daemon.md`, but `docs/commands/daemon.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:32
docs/commands/readme.md links to `parallel.md`, but `docs/commands/parallel.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:33
docs/commands/readme.md links to `fixup.md`, but `docs/commands/fixup.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:64
docs/commands/readme.md links to `run.md`, but `docs/commands/run.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:75
docs/commands/readme.md links to `rerun.md`, but `docs/commands/rerun.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:77
docs/commands/readme.md links to `search.md`, but `docs/commands/search.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:78
docs/commands/readme.md links to `ps.md`, but `docs/commands/ps.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:82
docs/commands/readme.md links to `kill.md`, but `docs/commands/kill.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:83
docs/commands/readme.md links to `logs.md`, but `docs/commands/logs.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:84
docs/commands/readme.md links to `agent.md`, but `docs/commands/agent.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:91
docs/commands/readme.md links to `match.md`, but `docs/commands/match.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:92
docs/commands/readme.md links to `sessions.md`, but `docs/commands/sessions.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:93
docs/commands/readme.md links to `init.md`, but `docs/commands/init.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:102
docs/commands/readme.md links to `doctor.md`, but `docs/commands/doctor.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:103
docs/commands/readme.md links to `projects.md`, but `docs/commands/projects.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:108
docs/commands/readme.md links to `active.md`, but `docs/commands/active.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:109
docs/commands/readme.md links to `hub.md`, but `docs/commands/hub.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:110
docs/commands/readme.md links to `tools.md`, but `docs/commands/tools.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:126
docs/commands/readme.md links to `notify.md`, but `docs/commands/notify.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:127
docs/commands/readme.md links to `server.md`, but `docs/commands/server.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:128
docs/commands/readme.md links to `../flow-toml.md`, but `docs/flow-toml.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/commands/readme.md:139
What to do
Reconcile the README with reality: docs/commands/readme.md links to `daemon.md`, but `docs/commands/daemon.md` does not exist; docs/commands/readme.md links to `parallel.md`, but `docs/commands/parallel.md` does not exist; docs/commands/readme.md links to `fixup.md`, but `docs/commands/fixup.md` does not exist; docs/commands/readme.md links to `run.md`, but `docs/commands/run.md` does not exist; docs/commands/readme.md links to `rerun.md`, but `docs/commands/rerun.md` does not exist.
Readiness · Readiness — Whether an automated pipeline builds and tests every change.
Method: Filesystem scan: CI workflow files (.github/workflows, .gitlab-ci.yml, etc.) for build and test stages. Exhaustive, deterministic.
Do you agree with this assessment?
P10 · Library API & versioning10.0 / 10Exemplary○ Nothing flagged
Readiness · Readiness — For a library: a deliberate (small) public API surface and explicit semantic versioning so consumers can depend on it safely.
Method: Roslyn scan: public API surface area and semantic-versioning markers (SemVer attributes, changelog entries) for libraries; off .NET, a library is the ecosystem's publication act (an npm package that is not private and names an entry point, a PyPI distribution with a build system, a Rust library crate, a Maven/Gradle module that publishes, a Go module with no package main, a gemspec, a Composer library, a SwiftPM library product, a pub.dev or Hex package), its surface is the share of types the language's code model records as public (Rust, Swift, Java, Kotlin, Go, Dart; not measured where the model records no type visibility or, as in TypeScript, only module-level export), and its version is read from the manifest, a semver CHANGELOG, release tooling or semver git tags. Exhaustive, deterministic.
Do you agree with this assessment?
P2 · Observability6.0 / 10Adequate✓ Tool-verified
Readiness · Readiness — Whether the code is diagnosable in production — structured logging, tracing/metrics, health checks.
Only 1/3 runnable modules use logging (modules with no entry point or server are excluded — they are libraries a runnable module hosts). Silent: `.`, `crates/seq_everruns_bridge`.
What to do
Extend structured logging to the remaining runnable modules so everything you run is diagnosable in production.
Readiness · Readiness — Whether SAST, secret/dependency scanning and performance benchmarking are wired in (presence, not runtime).
Method: Filesystem scan: SAST configuration, dependency-update automation, secret scanning, and a benchmark harness or benchmark step — in this repository's own ecosystem. Exhaustive, deterministic.
No static application security testing detected. For this repository's stack, add cargo-audit / cargo-deny (or clippy) (or `semgrep --config=auto`, which runs on any language) as a CI step. What was searched, so you can tell an absence from a miss: the 4 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner. — REDACTED:4
What to do
Add a SAST step to CI running what this repository's stack ships: cargo-audit / cargo-deny (or clippy) — or `semgrep --config=auto`, which runs on any language — so a security regression fails the build instead of landing.
Enable Dependabot/Renovate or a dependency-review gate.
Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
Readiness · Readiness — Whether releases are automated and safely reversible (probes, rolling updates, approval gates) — from manifests/pipeline files, not the live environment.
Method: Filesystem scan: deployment manifests/IaC (K8s YAML, Helm, Terraform) for rolling updates, probes, approval gates, migration hooks. Exhaustive, deterministic.
The release is automated and no gate that pauses it for a human is DECLARED IN THIS REPOSITORY'S PIPELINE FILES. What was read: every file under `.github/workflows/`, `.forgejo/workflows/`, `.gitea/workflows/`, `.azuredevops/` and `.azure-pipelines/`, plus `.gitlab-ci*` and `azure-pipelines*` — with comment text stripped, so documenting a gate is not declaring one. What would have counted: GitLab's `when: manual`, CircleCI's `type: approval`, an Azure `ManualValidation@` task or an `approvals:` block, a Jenkins `input` step, a `uses:` step naming an approval action, an `environment:` paired with `reviewers` / `required_reviewers` / `protection` / `wait-timer` / `deployment_branch_policy`, a draft-release step, a `workflow_dispatch` promotion, or a release-event gate. ★ What this cannot see, because none of it is a file: a GitHub environment whose required reviewers are configured in repo SETTINGS, a branch protection rule, or an organisation deployment policy — all of them real, enforced gates that live outside the repository. If yours is one of those, this row is wrong and nothing in the tree could have told us. Otherwise: whatever the release trigger points at is published to users unreviewed, so a mistagged or unverified commit ships and the only remedy is a follow-up release.
What to do
Nothing pauses a release for a human: publish as a draft release (or gate the release job on a protected tag/manual dispatch) so a bad build can be stopped before users can download it.
Readiness · Readiness — Whether outbound HTTP calls are wrapped in resilience (retry/timeout/circuit-breaker) so a failing dependency doesn't cascade.
Method: Source scan: outbound HTTP clients and what bounds them — resilience handlers (Polly, AddStandardResilienceHandler) on .NET; on Go, the JVM, Python, JavaScript/TypeScript, Ruby, PHP, Rust, Elixir, Swift, Dart and Erlang, a timeout, deadline, retry or breaker beside each call, or a process-wide client default (a framework-wide deadline such as Drupal core's, Laravel's or actix's awc counts). Exhaustive, deterministic.
`Client::builder()` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout. (×2) — src/otp.rs:84, src/secrets.rs:122
`reqwest::Client::builder(` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout. — src/proxy/server.rs:101
`reqwest::blocking::Client::new(` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout. (×2) — src/servers_tui.rs:30, src/skills.rs:626
`reqwest::blocking::get(` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout. (×2) — src/skills.rs:1016, src/skills.rs:1070
What to do
Give every client a whole-request bound: `reqwest::Client::builder().timeout(Duration::from_secs(10))` (never `reqwest::get` or `Client::new()`, which have none), ureq's `timeout_global`, or wrap the call in `tokio::time::timeout`; add retry with back-off (`reqwest-retry`'s `RetryTransientMiddleware`, `backoff`) around dependencies that fail.
Readiness · Performance — Whether asynchronous code stays responsive — it avoids sync-over-async blocking (a .NET .Wait()/.GetAwaiter().GetResult(), a time.sleep or blocking HTTP call inside a Python coroutine, a *Sync call inside an async JavaScript function, block_on inside a Rust async fn, runBlocking inside a Kotlin suspend function, block() inside a Reactor publisher) that stalls a thread or event loop and risks deadlock, and, where the code is a reusable library on .NET, awaits with ConfigureAwait(false) so it never captures and stalls its caller's context.
Method: Production-source scan: sync-over-async blocking counted everywhere — .Wait()/.GetAwaiter().GetResult() in .NET; off .NET, read from each language's code model, a blocking call inside an async function (Python, TS/JS, Rust, Kotlin, Swift, Dart) or inside a Java method returning a Reactor Mono/Flux or a Scala method returning a Future or effect — and, for a .NET library with ≥5 awaits, the share of awaits using ConfigureAwait(false). Deterministic, syntax/text detection.
Other · Security — Read from this repository's Rust source: cryptographic hygiene (weak hash or cipher, key material fixed in the source) and outbound TLS (certificate validation, protocol version) — facts about code that hold whether or not it serves anything itself. This repository commits the configuration that serves its own HTTP surface, so that configuration was read in full for the security response headers it sets. This repository serves HTTP itself (`axum::serve(` (src/log_server.rs:203)), so its Rust source was also read for the server controls: TLS served or HSTS set, security response headers, cookie flags and inbound validation — each credited where its Rust spelling appears in production source, not proven on every route. A Rocket 0.5 application is credited the headers Rocket's default `Shield` sends unless it attaches its own, and its cookie jar's SameSite=Strict default; a session middleware its default cookie flags.
Method: Roslyn plus filesystem scan: HSTS/security headers, secure cookies, input validation, middleware order, weak crypto (MD5/SHA1/DES); HTTPS-metadata context-aware. On a repository with no .NET source it reads JavaScript/TypeScript, Dart, Ruby, Scala, Rust or Elixir source itself (test, vendored, generated and minified paths not) for the arms that hold whether or not the code serves HTTP: a weak hash or cipher, key material fixed in the source, a TLS client that accepts any certificate, and (JavaScript/TypeScript, Ruby, Scala, Rust and Elixir) an obsolete TLS version; the server controls are not assessed there, and a Dart, Ruby, Scala, Rust or Elixir repository that serves no HTTP of its own is N/A on them. Deterministic.
MD5/SHA1 is computed here, and both are collision-broken. If this digest protects anything — a signature, an integrity or tamper check, a credential, or any value an attacker can influence — that is a real weakness: use SHA-256+ (`sha2::Sha256::digest(…)`) for content integrity, or a KDF (bcrypt/Argon2/scrypt) for password storage. If it only derives a non-security identifier (a cache key, an avatar URL, an ETag), collision resistance carries no security consequence here; make that intent explicit instead — a non-cryptographic hash such as xxhash or murmurhash says it in code — since the algorithm alone cannot distinguish the two uses. Where a protocol this code does not own fixes the digest (a k-anonymity range query, a legacy signature format), the protocol decides; say so beside the call. (×6) — src/commit.rs:10011, src/commit.rs:13628, src/commit.rs:13641, …
None of the 11 security response headers the OWASP Secure Headers Project recommends (Content-Security-Policy, Strict-Transport-Security, X-Content-Type-Options, X-Frame-Options, …) is configured — defense in depth, even when a reverse proxy could set them. This is reported because `cdn-nginx.conf` is committed to this repository and declares the server that serves it, so the configuration that would carry these headers is in this repository and was read in full. (−2.0 on this card.) — scripts/cdn-nginx.conf:6
This repository starts an HTTP server and nothing in its Rust source or committed `Rocket.toml` secures the transport: no TLS served (actix-web `bind_rustls`/`bind_openssl`, axum-server `bind_rustls` with a `RustlsConfig`, tonic `ServerTlsConfig`, a `TlsAcceptor`, Rocket's `[default.tls]`), no `Strict-Transport-Security` header, no `X-Forwarded-Proto` read from a TLS-terminating proxy — so its traffic may cross the network in clear text. (−2.0 on this card.) The server: `axum::serve(` (src/log_server.rs:203).
What to do
Review each MD5/SHA1 use by what it protects: replace it with SHA-256+ (or a KDF for passwords) where the digest is security-relevant, and switch it to a non-cryptographic hash (xxhash, murmurhash) where it only derives an identifier such as a cache key. This repository constructs a collision-broken hash (MD5/SHA1) at 6 sites, not one: `src/commit.rs:10011` (`Sha1::new`), `src/commit.rs:13628` (`Sha1::new`), `src/commit.rs:13641` (`Sha1::new`), `src/pr_preview.rs:951` (`Sha1::new`), `src/pr_preview.rs:1634` (`Sha1::new`), `src/todo.rs:307` (`Sha1::new`). Each is a separate decision — fixing only the line this row cites leaves the others in place.
Set security response headers on the surface this repository serves: an `add_header` directive per header in the nginx/Caddy/Apache config, a `_headers` / `vercel.json` / `netlify.toml` entry for a static host, or `helmet()` in the HTTP server. `Content-Security-Policy` is the one that pays for itself first — it is what contains an injected script once one reaches the page — followed by `X-Content-Type-Options: nosniff` and a frame policy (`X-Frame-Options: DENY`, or CSP `frame-ancestors`). Where the app is served from a build container, the header configuration belongs in the image beside the built assets, so it ships with them rather than depending on where it lands.
Secure the server's transport: serve TLS itself (`HttpServer::bind_rustls_0_23(addr, config)` in actix-web, `axum_server::bind_rustls(addr, RustlsConfig::from_pem_file(…))`, tonic's `Server::builder().tls_config(ServerTlsConfig::new().identity(…))`, Rocket's `[default.tls]`), or run it behind a TLS-terminating proxy and check `X-Forwarded-Proto`; send `Strict-Transport-Security` once it is HTTPS-only.
Other · Code Health — Whether the code avoids sync-over-async (deadlock-prone blocking on tasks) and async void.
Method: Roslyn syntax scan: async methods scanned for .Wait()/.GetAwaiter().GetResult() and async-void outside event handlers. Deterministic, hard fact per invocation.
Other · Security — Whether a hand-rolled public/private IP check can be walked past — a method that unwraps IPv4-mapped IPv6 but returns the opposite verdict for the same host written as IPv4-compatible, 6to4 or NAT64.
Method: Roslyn syntax + semantics: methods that unwrap IPv4-mapped IPv6 and hand-roll IPv4 range carve-outs, checked for whether the IPv6 branch also accounts for the IPv4-compatible, 6to4 and NAT64 embeddings. Deterministic, provable per finding. Advisory.
Other · Code Health — Whether a `when` guard is free of side effects — a guard that increments a counter or assigns while deciding whether its arm matches applies that change during PATTERN MATCHING, on an arm that may not be selected, and skips it entirely when a short-circuit to its left answers first.
Method: Roslyn syntax: `when` guards on case labels and switch-expression arms, read for a mutation (`++`/`--`/assignment) sitting in a position the guard's own `&&`/`||`/`??`/`?:`/`?.` can skip. Deterministic, provable per finding. Advisory.
Do you agree with this assessment?
X30 · Support guard that admits what it rejects10.0 / 10Exemplary○ Nothing flagged
Other · Code Health — Whether a guard written as a NEGATED `||` says what its author meant — `!(a || b || x != k)` is `!a && !b && x == k` by De Morgan, so a bail-out that mixes capabilities the code needs with a fault it refuses turns inside out: it fires only where the capabilities are ABSENT, and lets every value the fault term names walk straight into the body that cannot handle it.
Method: Roslyn syntax only, no semantic model: every logical-not whose operand is a parenthesised `||` chain of two or more disjuncts, flattened (a left-nested `a || b || c` read once would see `(a || b)` as one disjunct). A site enters the population on that shape alone. A finding additionally needs the disjuncts to DISAGREE in polarity: at least one bare boolean read — an identifier or member access, never an invocation, which is a predicate rather than a capability flag — and at least one `x != <constant>`, the only form that negates into an exact-value pin (`== null` negates into a looser requirement and is outside the fault set). Consistently-polarised disjunctions, all-fault or all-capability, are counted and never reported; a negated `&&` is outside the population entirely. No same-receiver gate: it was measured to cost a real defect and remove no false positive. Deterministic, provable per finding. Advisory.
Other · Code Health — Whether log calls use message templates (queryable) rather than interpolated strings.
Method: Roslyn syntax scan: every log call-site counted; interpolated-string first-argument violations flagged. Population is all log calls, not estimated. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `trace`/`debug`/`info`/`warn`/`error`/`fatal`/`verbose`/`silly`/`http`/`log` call on a receiver named for a logger, in a package whose own or an enclosing `package.json` declares a logger that carries values as fields (pino, pino-http, nestjs-pino, Fastify, winston, bunyan, tslog, LogTape, roarr), whose first deciding argument is a template literal with substitutions; an object-literal fields argument is stepped over, a plain string message clears the call. Python is read the same way: a `debug`/`info`/`warning`/`error`/`exception`/`critical`/`log` call on a logger in a file that imports the standard library’s `logging` or structlog (loguru, which formats at the call, is not judged), whose message is a whole f-string with a non-constant field; a `%`-formatted, `.format()`-ed or concatenated message is not convicted, as in C#. PHP is read the same way: a PSR-3 level call (`emergency`…`debug`, `log`) on a logger (`$logger`, `$this->logger`, Laravel’s `Log::`, `logger()`, `\Drupal::logger()`) in a package whose `composer.json` requires a PSR-3 logger or a framework that hands one out (psr/log, Monolog, Laravel, Symfony, Drupal, CakePHP), or a file that imports one, whose message is a double-quoted string interpolating a variable; a single-quoted message clears the call, and `sprintf` or `.` concatenation is not convicted, as in C#. Dart is read the same way: a `trace`/`debug`/`info`/`warn`/`error`/`fatal` call on Sentry’s structured logger (`Sentry.logger`) whose message is a whole string literal interpolating a value (`$name`, `${…}`); the `Sentry.logger.fmt` template API clears the call. Dart that logs only through loggers with one message and no fields (package:logging, package:logger, talker, dart:developer) is not applicable rather than a reach gap. Ruby is read the same way: a `trace`/`debug`/`info`/`warn`/`error`/`fatal` call on the console gem’s `Console` (declared by a Gemfile, gemspec or Gemfile.lock, or required) or, where SemanticLogger, Ougai or dry-logger is declared or required, on a receiver named for a logger (`logger`, `@logger`, `Rails.logger`, `log`), whose first deciding argument is, as the whole argument, a double-quoted string interpolating a non-constant value (`#{…}`, `#@ivar`); a plain literal clears the call, keyword arguments are the fields, and a block, `%`-format or `+` concatenation is not convicted. Ruby that logs only through the standard Logger (Rails.logger) is not applicable rather than a reach gap. Deterministic.
`debug!` at line 3063 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/ai.rs:3063
`debug!` at line 1844 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:1844
`debug!` at line 1857 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:1857
`debug!` at line 1906 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:1906
`debug!` at line 1920 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:1920
`debug!` at line 1952 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:1952
`debug!` at line 1966 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:1966
`debug!` at line 4316 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:4316
`debug!` at line 5862 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:5862
`debug!` at line 5867 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:5867
`debug!` at line 6779 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:6779
`debug!` at line 6844 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:6844
`debug!` at line 7195 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:7195
`debug!` at line 7269 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:7269
`debug!` at line 7969 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:7969
`debug!` at line 13738 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:13738
`debug!` at line 13913 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:13913
`debug!` at line 14023 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:14023
`debug!` at line 14026 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:14026
`debug!` at line 14186 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:14186
`debug!` at line 14189 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:14189
`debug!` at line 14216 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:14216
`debug!` at line 14476 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:14476
`debug!` at line 14520 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:14520
`debug!` at line 14591 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:14591
`debug!` at line 14688 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:14688
`debug!` at line 14697 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:14697
`debug!` at line 14709 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:14709
`debug!` at line 14718 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:14718
`debug!` at line 14744 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:14744
`debug!` at line 14753 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:14753
`debug!` at line 15170 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:15170
`debug!` at line 15191 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:15191
`debug!` at line 15537 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/commit.rs:15537
`warn!` at line 2077 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/config.rs:2077
`warn!` at line 2159 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/config.rs:2159
`warn!` at line 2170 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/config.rs:2170
`debug!` at line 705 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/macos.rs:705
`info!` at line 165 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/server.rs:165
`info!` at line 217 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — src/proxy/mod.rs:217
The score is the rank-weighted fold of these lenses (worst-heaviest), each including its meta-dimensions; a lens with a Critical contributor is capped at Fair (its band reads "gated by …") and is never the strongest area however high its average.
Unscored — 3 check(s) recorded observations but carry no score
These checks ran and found something, but they do not carry a score — either by design (an advisory check reports evidence rather than grading it) or because they could not be scored here. They are excluded from the score for that reason, not because there was nothing to see.
X10 Duplicated predicate — 35 observation(s) recorded · Advisory — this card reports evidence and never carries a score.
X7 Silent fallback defaults — 24 observation(s) recorded · Advisory — this card reports evidence and never carries a score.
X9 Subsumed condition operand — 18 observation(s) recorded · Advisory — this card reports evidence and never carries a score.
Not evidenced — 1 control(s) we could not find positive evidence for
These checks grade a working control, and the repository shows no evidence of one. That is deliberately not scored as a zero: a repository cannot show an ops runbook, a database TTL or an infrastructure-side audit log, so absence of evidence here is not evidence the control is missing. It is also not a statement that the check is irrelevant to this codebase — the thing it grades applies; we just could not see it. Excluded from the score either way.
P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
Not included — 73 check(s) not relevant to this codebase
These checks had nothing to measure here (no tests, no git history, the codebase is small, or the architecture style doesn't apply), so they're omitted above rather than scored low.
AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
AX1 Captive dependencies — Not applicable: this repository's Python imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's; Rust with no dependency-injection crate has no container to hand one lifetime's instance to another — every value is owned by the code that builds it, and the borrow checker rejects a longer-lived value keeping a borrow of a shorter-lived one.
AX2 Stateful singletons — No container singleton was found, so there is no shared instance for concurrent requests to race on. No function in this Python code is served by a threaded web framework (a Flask, Bottle or FastAPI route, a Django or Pyramid view), so no module is shared between request threads. Rust's compiler refuses unsynchronised shared mutation — a value shared across threads must be Sync — so the race this check looks for cannot be written. TypeScript/JavaScript runs each process's requests on one event loop, so no two requests write a shared object at the same instant (interleaving across an await is a different defect).
AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX6 Interface segregation — no exported interface declares behaviour
AX7 Slice cohesion — not applicable — not a vertical-slice architecture
AX8 Test isolation — no test/production split to check
AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
AXR1 Runtime accessibility — the service did not build — `cargo build --locked --bin 'flowd'` exited 101: warning: Cargo.toml: file `src/main.rs` found to be present in multiple build targets:
* `bin` target `f`
* `bin` target `flow`
warning: `flowd…; runtime evidence skipped (launch chosen because 'axum' dependency in Cargo.toml, binary 'flowd', started with its 'server' subcommand) This is a statement about this run, not a statement about your application: nothing here says the surface is inaccessible, only that it was never rendered.
C1 Data Protection — No personal data detected in a persisted data model — no PII-named field (email, first_name, date_of_birth, phone, …) or stored credential in a Diesel schema, a SeaORM entity, a Diesel or sqlx row struct, or a SQL CREATE TABLE or ALTER TABLE — and no database or data-store crate (sqlx, Diesel, SeaORM, rusqlite, tokio-postgres, MongoDB, …) in the source either, so this repository keeps no data at rest for these controls to protect.
C3 Audit Trail — No personal data detected in a persisted data model — no PII-named field (email, first_name, date_of_birth, phone, …) or stored credential in a Diesel schema, a SeaORM entity, a Diesel or sqlx row struct, or a SQL CREATE TABLE or ALTER TABLE — and no database or data-store crate (sqlx, Diesel, SeaORM, rusqlite, tokio-postgres, MongoDB, …) in the source either, so this repository keeps no sensitive data whose changes an audit trail would record. If it does (through a store configured outside this repository, for instance), the trail belongs to wherever that data is stored.
C4 Data Retention — No personal data detected in a persisted data model — no PII-named field (email, first_name, date_of_birth, phone, …) or stored credential in a Diesel schema, a SeaORM entity, a Diesel or sqlx row struct, or a SQL CREATE TABLE or ALTER TABLE — and no database or data-store crate (sqlx, Diesel, SeaORM, rusqlite, tokio-postgres, MongoDB, …) in the source either, so this repository keeps no personal data whose lifetime a retention limit would bound.
C5 Data-Subject Rights — No personal data detected in a persisted data model — no PII-named field (email, first_name, date_of_birth, phone, …) or stored credential in a Diesel schema, a SeaORM entity, a Diesel or sqlx row struct, or a SQL CREATE TABLE or ALTER TABLE — and no database or data-store crate (sqlx, Diesel, SeaORM, rusqlite, tokio-postgres, MongoDB, …) in the source either, so this repository keeps no personal data for a data subject to erase, export or consent over.
D10 Test Quality — ~397 lines of test source are present (.rs, .ts) but no test cases reached the test census for this repository — no test root we could resolve declared them, or the files we read declare no cases in a test framework we recognise — so skipped/assertion-free tests couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
D11 Test Reliability — Test reliability not included — the .rs suite was found but not re-run
D16 Bus Factor — bus factor 1 — one contributor carries this repository
D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
D21 Naming Consistency — N/A — too few peers to establish a naming convention (18003 declarations, no unit with a dominant convention).
D22 Internal API Consistency — API consistency is measured on C# only; the exposed Rust surface was not measured.
D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ sibling projects each declaring an entity of their own or taking another project's integration events. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
D24 Comment Value — D24 reads C#, Visual Basic, TypeScript and JavaScript comments only; comments in this repository's .py, .rs source were not judged.
D25 ADR Conformance — no ADRs to check
D27 Navigability — D27 counts a call into the standard library or a dependency as unresolved for this repository's language (.rs), so too few call sites counted as resolved to assess navigability. Not scored: this is a gap in the analyzer, not a verdict about this repository.
D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.
D32 Data Compliance (PII/GDPR) — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.
D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
D8 Code Coverage — Coverage not measured — Rust suite
DM1 Aggregate boundaries — this Rust crate declares no domain aggregate (a struct with private state and its own command methods), so DM1's aggregate-boundary read has no population to be taken over
DM2 Strongly-typed ids — no in-repo typed-id idiom — primitive-obsession recorded as advisory DM8, DM2 not gated
DM3 Integration-event coupling — no integration events detected — coupling check not applicable
DM5 Encapsulated state — this Rust crate declares no type implementing a hand-rolled Hash/PartialEq, so DM5's value-identity encapsulation read has no population to be taken over
DM6 Domain ↔ infrastructure boundary — this Rust crate maps no type to a persistence framework (diesel/sea-orm/sqlx), so DM6's domain↔infrastructure fusion read has no population to be taken over
DM7 Repository granularity — no repository abstraction detected (e.g. uses a document session)
ED2 Event/command shape — not scored — deciding whether a command has more than one competing handler requires resolving the call graph, and a call made through an inferred or generic receiver has no resolvable owner in the source. Reported as guidance rather than measured
ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
ES1 Fold determinism — not applicable — the code was read and holds no event-replay fold, so there is nothing for this check to judge
GD1 Unfinished & placeholder code — no source files were read — this check reads C#, F#, JavaScript/TypeScript, Dart, Ruby and Scala, and none was read for this repository's product. That is a limit of the analyzer, not a finding about your code.
IC1 Incompleteness & stubs — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
P12 CI test-gate honesty — Reported, not scored — and nothing was matched here. The coverage check applies to any stack, and the automatic-re-run check to any GitHub-Actions workflow, but the checks for excluded tests, skipped tests and sleep-based synchronisation currently recognise only some ecosystems' test-runner idioms, so on a repository built with another stack the zeros below mean 'not checked', not 'clean'.
P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
P9 Domain vs controller coverage — coverage not measured: this check compares the coverage of the analyzer's own test run across the domain and web layers, and that run measured none here — Test coverage (D8) says why
PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for `#[bench]`, criterion's `bench_function`/`bench_with_input`, `#[divan::bench]` or `#[library_benchmark]` in any `.rs` file, or criterion, divan, iai or a `[[bench]]` target in a Cargo.toml, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
PF2 Allocation hygiene — Not scored: this check counted allocation-aware idioms (Span, pools, stackalloc) per line, which describes what kind of code a repository is rather than whether it has an allocation problem, so it was withdrawn. Nothing here is a finding about your code.
X12 Unreachable branch — X12 reached only 3% of this repository's production lines — rust (141,585 lines), cpp (1,432 lines) was left unread. Not scored: a score over a minority of the product would be published as the whole of it.
X13 Undrained process stream — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X15 Unvalidated length from an untrusted reader — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X16 Unfloored truncation loop — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X17 Uncapped recursion over a caller-supplied document — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X18 Disposal-pattern correctness — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X19 Unrestored process-global state — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X2 Cancellation propagation — no C# was loaded; this repository's Python and Rust were read, and no request in it can be cancelled by a caller — a Python request takes no token: asyncio cancels the task and trio or anyio the scope that made it, from outside the call, and requests, httpx, aiohttp and gRPC take a timeout, not a cancellation; a Rust request takes no token: a future is cancelled by dropping it, from outside the call (select!, a timeout, an aborted task), and reqwest, hyper and tonic take none
X20 Mistyped argument guard — This check asks whether an argument guard reports an EMPTY value as a NULL one, which needs a language that throws a null-specific argument exception — .NET's ArgumentNullException, the JVM's NullPointerException, Dart's ArgumentError.notNull. This repository contains none of those languages: the ones it is written in have a single exception for a bad argument, so there is no pair of exceptions to confuse and nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
X22 Contradicted release guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X23 Unguarded diagnostic materialisation — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X24 Document value interpolated into markup unescaped — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X25 Inert configuration knob — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X26 Unsynchronised callback handoff — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X27 Collection changed while being enumerated — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X28 Index access outside its own emptiness guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X29 Per-element action decided by a fixed element — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X3 Exception handling — X3 reached only 3% of this repository's production lines — rust (141,585 lines), cpp (1,432 lines) was left unread. Not scored: a score over a minority of the product would be published as the whole of it.
X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
X5 Nullable reference types — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Appendix A — Findings (grouped)
The findings behind the scores, grouped by severity, then by dimension and kind. The high-severity issues are enumerated in full below; items per group are capped at 25 with any overflow stated explicitly per group, never silently truncated. The complete machine-readable list of every finding (all severities) is the companion findings.md in this report's bundle.
flowd::sync::run_sync (cognitive 227) src/sync.rs:1271— flowd::sync::run_sync has cognitive complexity 227 (threshold 15). Drivers by points: if/else 95 (188 pts), boolean chains 23, loops 3 (10 pts), match/switch 3 (6 pts) (nesting depth added 103). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
flowd::sync::run_jj_sync (cognitive 227) src/sync.rs:3237— flowd::sync::run_jj_sync has cognitive complexity 227 (threshold 15). Drivers by points: if/else 92 (196 pts), boolean chains 16, loops 3 (8 pts), match/switch 2 (7 pts) (nesting depth added 114). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
flowd::commit::run_with_check_sync (cognitive 180) src/commit.rs:3898— flowd::commit::run_with_check_sync has cognitive complexity 180 (threshold 15). Drivers by points: if/else 75 (131 pts), match/switch 8 (21 pts), boolean chains 16, loops 5 (12 pts) (nesting depth added 76). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
flowd::commit::run_commit_queue (cognitive 168) src/commit.rs:8959— flowd::commit::run_commit_queue has cognitive complexity 168 (threshold 15). Drivers by points: if/else 55 (124 pts), match/switch 8 (22 pts), boolean chains 13, loops 4 (9 pts) (nesting depth added 88). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
flowd::ai::scan_all_project_sessions (cognitive 115) src/ai.rs:15654— flowd::ai::scan_all_project_sessions has cognitive complexity 115 (threshold 15). Drivers by points: if/else 21 (76 pts), loops 7 (36 pts), boolean chains 3 (nesting depth added 84). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
flowd::ai::copy_session_by_search (cognitive 114) src/ai.rs:13481— flowd::ai::copy_session_by_search has cognitive complexity 114 (threshold 15). Drivers by points: if/else 20 (89 pts), loops 5 (22 pts), boolean chains 3 (nesting depth added 86). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
flowd::sync_plan::render_markdown (cognitive 99) src/sync_plan.rs:1232— flowd::sync_plan::render_markdown has cognitive complexity 99 (threshold 15). Drivers by points: if/else 24 (64 pts), loops 11 (32 pts), boolean chains 3 (nesting depth added 61). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
flowd::main (cognitive 98) src/main.rs:44— flowd::main has cognitive complexity 98 (threshold 15). Drivers by points: if/else 38 (76 pts), boolean chains 15, match/switch 4 (7 pts) (nesting depth added 41). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
flowd::setup::setup_deploy (cognitive 78) src/setup.rs:396— flowd::setup::setup_deploy has cognitive complexity 78 (threshold 15). Drivers by points: if/else 43 (68 pts), boolean chains 7, match/switch 1 (3 pts) (nesting depth added 27). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
flowd::supervisor::monitor_daemons (cognitive 78) src/supervisor.rs:895— flowd::supervisor::monitor_daemons has cognitive complexity 78 (threshold 15). Drivers by points: if/else 19 (63 pts), loops 5 (10 pts), match/switch 1 (3 pts), boolean chains 2 (nesting depth added 51). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
flowd::hive::discover_agents (cognitive 72) src/hive.rs:188— flowd::hive::discover_agents has cognitive complexity 72 (threshold 15). Drivers by points: if/else 17 (61 pts), loops 5 (11 pts) (nesting depth added 50). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
flowd::deps::build_pick_entries (cognitive 71) src/deps.rs:746— flowd::deps::build_pick_entries has cognitive complexity 71 (threshold 15). Drivers by points: if/else 22 (52 pts), loops 6 (14 pts), match/switch 2 (5 pts) (nesting depth added 41). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
flowd::publish::run_github (cognitive 68) src/publish.rs:111— flowd::publish::run_github has cognitive complexity 68 (threshold 15). Drivers by points: if/else 36 (65 pts), boolean chains 3 (nesting depth added 29). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
flowd::commit::approve_all_queued_commits (cognitive 67) src/commit.rs:7712— flowd::commit::approve_all_queued_commits has cognitive complexity 67 (threshold 15). Drivers by points: if/else 23 (51 pts), boolean chains 7, loops 4 (6 pts), match/switch 2 (3 pts) (nesting depth added 31). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
flowd::env::bootstrap_cloudflare_secrets (cognitive 65) src/env.rs:2653— flowd::env::bootstrap_cloudflare_secrets has cognitive complexity 65 (threshold 15). Drivers by points: if/else 32 (55 pts), boolean chains 4, loops 3, match/switch 1 (3 pts) (nesting depth added 25). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
flowd::commit::run_codex_review_once (cognitive 64) src/commit.rs:5043— flowd::commit::run_codex_review_once has cognitive complexity 64 (threshold 15). Drivers by points: if/else 23 (49 pts), match/switch 5 (10 pts), loops 4 (5 pts) (nesting depth added 32). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
flowd::ai::recover_row_score (cognitive 62) src/ai.rs:7470— flowd::ai::recover_row_score has cognitive complexity 62 (threshold 15). Drivers by points: if/else 35 (60 pts), boolean chains 1, loops 1 (nesting depth added 25). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
flowd::deploy::deploy_cloudflare (cognitive 62) src/deploy.rs:1054— flowd::deploy::deploy_cloudflare has cognitive complexity 62 (threshold 15). Drivers by points: if/else 27 (53 pts), boolean chains 3, loops 1 (3 pts), match/switch 1 (3 pts) (nesting depth added 30). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
flowd::setup::load_server_setup_template (cognitive 62) src/setup.rs:953— flowd::setup::load_server_setup_template has cognitive complexity 62 (threshold 15). Drivers by points: if/else 14 (56 pts), match/switch 1 (6 pts) (nesting depth added 47). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
flowd::env::show_keys (cognitive 59) src/env.rs:3081— flowd::env::show_keys has cognitive complexity 59 (threshold 15). Drivers by points: if/else 18 (37 pts), loops 5 (15 pts), match/switch 1 (5 pts), boolean chains 2 (nesting depth added 33). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
flowd::commit::run_invariant_gate (cognitive 56) src/commit.rs:3264— flowd::commit::run_invariant_gate has cognitive complexity 56 (threshold 15). Drivers by points: if/else 19 (41 pts), loops 5 (11 pts), boolean chains 4 (nesting depth added 28). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
flowd::tasks::run_command_with_pty (cognitive 56) src/tasks.rs:2552— flowd::tasks::run_command_with_pty has cognitive complexity 56 (threshold 15). Drivers by points: if/else 24 (48 pts), loops 3 (4 pts), match/switch 2 (3 pts), boolean chains 1 (nesting depth added 26). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
flowd::ai::codex_project_ai_command (cognitive 54) src/ai.rs:10972— flowd::ai::codex_project_ai_command has cognitive complexity 54 (threshold 15). Drivers by points: if/else 19 (38 pts), loops 4 (15 pts), match/switch 1 (nesting depth added 30). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
flowd::processes::show_hub_task_logs (cognitive 52) src/processes.rs:572— flowd::processes::show_hub_task_logs has cognitive complexity 52 (threshold 15). Drivers by points: if/else 17 (41 pts), loops 3 (8 pts), match/switch 1 (3 pts) (nesting depth added 31). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
flowd::deploy::deploy_host (cognitive 51) src/deploy.rs:877— flowd::deploy::deploy_host has cognitive complexity 51 (threshold 15). Drivers by points: if/else 23 (39 pts), boolean chains 5, loops 1 (4 pts), match/switch 1 (3 pts) (nesting depth added 21). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
flowd::main (cyclomatic 158) src/main.rs:44— flowd::main has cyclomatic complexity 158 (threshold 15). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Where every arm is uniform — the same kind of value, with no behaviour of its own — a table keyed by the case is the shorter form; wherever the arms carry different data or different behaviour, keep them as cases, because collapsing those trades an explicit, reviewable set of cases for nothing.
flowd::sync::run_sync (cyclomatic 100) src/sync.rs:1271— flowd::sync::run_sync has cyclomatic complexity 100 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
flowd::commit::run_with_check_sync (cyclomatic 95) src/commit.rs:3898— flowd::commit::run_with_check_sync has cyclomatic complexity 95 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
flowd::sync::run_jj_sync (cyclomatic 90) src/sync.rs:3237— flowd::sync::run_jj_sync has cyclomatic complexity 90 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
flowd::commit::run_commit_queue (cyclomatic 84) src/commit.rs:8959— flowd::commit::run_commit_queue has cyclomatic complexity 84 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
flowd::ai::run (cyclomatic 76) src/ai.rs:784— flowd::ai::run has cyclomatic complexity 76 (threshold 15). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Where every arm is uniform — the same kind of value, with no behaviour of its own — a table keyed by the case is the shorter form; wherever the arms carry different data or different behaviour, keep them as cases, because collapsing those trades an explicit, reviewable set of cases for nothing.
flowd::startup_policy_for (cyclomatic 63) src/main.rs:695— flowd::startup_policy_for has cyclomatic complexity 63 (threshold 15). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Where every arm is uniform — the same kind of value, with no behaviour of its own — a table keyed by the case is the shorter form; wherever the arms carry different data or different behaviour, keep them as cases, because collapsing those trades an explicit, reviewable set of cases for nothing.
flowd::env::bootstrap_cloudflare_secrets (cyclomatic 39) src/env.rs:2653— flowd::env::bootstrap_cloudflare_secrets has cyclomatic complexity 39 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
flowd::sync_plan::render_markdown (cyclomatic 38) src/sync_plan.rs:1232— flowd::sync_plan::render_markdown has cyclomatic complexity 38 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
flowd::setup::setup_deploy (cyclomatic 37) src/setup.rs:396— flowd::setup::setup_deploy has cyclomatic complexity 37 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
flowd::commit::approve_all_queued_commits (cyclomatic 35) src/commit.rs:7712— flowd::commit::approve_all_queued_commits has cyclomatic complexity 35 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
flowd::deploy_setup::handle_key (cyclomatic 35) src/deploy_setup.rs:283— flowd::deploy_setup::handle_key has cyclomatic complexity 35 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
flowd::commit::run_codex_review_once (cyclomatic 34) src/commit.rs:5043— flowd::commit::run_codex_review_once has cyclomatic complexity 34 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
flowd::publish::run_github (cyclomatic 33) src/publish.rs:111— flowd::publish::run_github has cyclomatic complexity 33 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
flowd::ai::scan_all_project_sessions (cyclomatic 31) src/ai.rs:15654— flowd::ai::scan_all_project_sessions has cyclomatic complexity 31 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top. This is NOT this file's highest cyclomatic complexity: flowd::ai::run_provider (cyclomatic 53) is higher and carries no row of its own — it was excluded as a flat dispatcher (a long switch/match over independent cases: many branches, almost no nesting), which this dimension does not treat as a refactor obligation. It is named here so the ranking you see in this file is not mistaken for the whole of it; the excluded function is counted neither in this dimension's figures nor in its score.
flowd::ai::recover_row_score (cyclomatic 30) src/ai.rs:7470— flowd::ai::recover_row_score has cyclomatic complexity 30 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top. This is NOT this file's highest cyclomatic complexity: flowd::ai::run_provider (cyclomatic 53) is higher and carries no row of its own — it was excluded as a flat dispatcher (a long switch/match over independent cases: many branches, almost no nesting), which this dimension does not treat as a refactor obligation. It is named here so the ranking you see in this file is not mistaken for the whole of it; the excluded function is counted neither in this dimension's figures nor in its score.
flowd::ai::run_sessions (cyclomatic 30) src/ai.rs:15469— flowd::ai::run_sessions has cyclomatic complexity 30 (threshold 15). To reduce it, separate the branches: extract each independent case into its own named function so the top-level body reads as a short sequence of named decisions. This is NOT this file's highest cyclomatic complexity: flowd::ai::run_provider (cyclomatic 53) is higher and carries no row of its own — it was excluded as a flat dispatcher (a long switch/match over independent cases: many branches, almost no nesting), which this dimension does not treat as a refactor obligation. It is named here so the ranking you see in this file is not mistaken for the whole of it; the excluded function is counted neither in this dimension's figures nor in its score.
flowd::env_setup::handle_key (cyclomatic 30) src/env_setup.rs:254— flowd::env_setup::handle_key has cyclomatic complexity 30 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
flowd::tasks::run_command_with_pty (cyclomatic 30) src/tasks.rs:2552— flowd::tasks::run_command_with_pty has cyclomatic complexity 30 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
flowd::ai::copy_session (cyclomatic 29) src/ai.rs:13286— flowd::ai::copy_session has cyclomatic complexity 29 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top. This is NOT this file's highest cyclomatic complexity: flowd::ai::run_provider (cyclomatic 53) is higher and carries no row of its own — it was excluded as a flat dispatcher (a long switch/match over independent cases: many branches, almost no nesting), which this dimension does not treat as a refactor obligation. It is named here so the ranking you see in this file is not mistaken for the whole of it; the excluded function is counted neither in this dimension's figures nor in its score.
flowd::ai::copy_session_by_search (cyclomatic 29) src/ai.rs:13481— flowd::ai::copy_session_by_search has cyclomatic complexity 29 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top. This is NOT this file's highest cyclomatic complexity: flowd::ai::run_provider (cyclomatic 53) is higher and carries no row of its own — it was excluded as a flat dispatcher (a long switch/match over independent cases: many branches, almost no nesting), which this dimension does not treat as a refactor obligation. It is named here so the ranking you see in this file is not mistaken for the whole of it; the excluded function is counted neither in this dimension's figures nor in its score.
flowd::codex_memory::fact_score (cyclomatic 29) src/codex_memory.rs:592— flowd::codex_memory::fact_score has cyclomatic complexity 29 (threshold 15). To reduce it, separate the branches: extract each independent case into its own named function so the top-level body reads as a short sequence of named decisions.
flowd::commit::run_invariant_gate (cyclomatic 29) src/commit.rs:3264— flowd::commit::run_invariant_gate has cyclomatic complexity 29 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
flowd::repos::bootstrap_home_branch (cyclomatic 29) src/repos.rs:791— flowd::repos::bootstrap_home_branch has cyclomatic complexity 29 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
flowd::commit::run_claude_review (cyclomatic 28) src/commit.rs:5543— flowd::commit::run_claude_review has cyclomatic complexity 28 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
FunctionTooLong: flowd::sync::run_sync src/sync.rs:1271— FunctionTooLong — flowd::sync::run_sync runs 497 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 397 over it, 4.97× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::sync::run_jj_sync src/sync.rs:3237— FunctionTooLong — flowd::sync::run_jj_sync runs 484 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 384 over it, 4.84× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::main src/main.rs:44— FunctionTooLong — flowd::main runs 449 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 349 over it, 4.49× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::ai::run src/ai.rs:784— FunctionTooLong — flowd::ai::run runs 285 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 185 over it, 2.85× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::ai::run_provider src/ai.rs:542— FunctionTooLong — flowd::ai::run_provider runs 203 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 103 over it, 2.03× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::pr_preview::collect_preview_issues src/pr_preview.rs:706— FunctionTooLong — flowd::pr_preview::collect_preview_issues runs 198 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 98 over it, 1.98× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::repos::bootstrap_home_branch src/repos.rs:791— FunctionTooLong — flowd::repos::bootstrap_home_branch runs 197 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 97 over it, 1.97× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::tasks::run_command_with_pty src/tasks.rs:2552— FunctionTooLong — flowd::tasks::run_command_with_pty runs 195 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 95 over it, 1.95× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::ai::build_codex_open_plan src/ai.rs:11374— FunctionTooLong — flowd::ai::build_codex_open_plan runs 192 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 92 over it, 1.92× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::env::bootstrap_cloudflare_secrets src/env.rs:2653— FunctionTooLong — flowd::env::bootstrap_cloudflare_secrets runs 185 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 85 over it, 1.85× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::publish::run_github src/publish.rs:111— FunctionTooLong — flowd::publish::run_github runs 184 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 84 over it, 1.84× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::deploy_setup::draw_ui src/deploy_setup.rs:398— FunctionTooLong — flowd::deploy_setup::draw_ui runs 180 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 80 over it, 1.80× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::workflow::inspect_jj_repo src/workflow.rs:397— FunctionTooLong — flowd::workflow::inspect_jj_repo runs 160 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 60 over it, 1.60× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::tasks::execute_task src/tasks.rs:1595— FunctionTooLong — flowd::tasks::execute_task runs 155 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 55 over it, 1.55× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::ai_taskd::run_request src/ai_taskd.rs:413— FunctionTooLong — flowd::ai_taskd::run_request runs 154 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 54 over it, 1.54× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::sync::run_switch src/sync.rs:1952— FunctionTooLong — flowd::sync::run_switch runs 152 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 52 over it, 1.52× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::env_setup::draw_ui src/env_setup.rs:359— FunctionTooLong — flowd::env_setup::draw_ui runs 151 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 51 over it, 1.51× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::supervisor::monitor_daemons src/supervisor.rs:895— FunctionTooLong — flowd::supervisor::monitor_daemons runs 149 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 49 over it, 1.49× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::codex_skill_eval::build_scorecard src/codex_skill_eval.rs:417— FunctionTooLong — flowd::codex_skill_eval::build_scorecard runs 143 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 43 over it, 1.43× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::setup::setup_deploy src/setup.rs:396— FunctionTooLong — flowd::setup::setup_deploy runs 143 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 43 over it, 1.43× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::ai::collect_codex_doctor_snapshot src/ai.rs:8566— FunctionTooLong — flowd::ai::collect_codex_doctor_snapshot runs 142 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 42 over it, 1.42× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::startup_policy_for src/main.rs:695— FunctionTooLong — flowd::startup_policy_for runs 141 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 41 over it, 1.41× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::proxy::summary::compute_summary src/proxy/summary.rs:146— FunctionTooLong — flowd::proxy::summary::compute_summary runs 139 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 39 over it, 1.39× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::tasks::run src/tasks.rs:1240— FunctionTooLong — flowd::tasks::run runs 138 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 38 over it, 1.38× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: flowd::ai_project_manifest::build_manifest src/ai_project_manifest.rs:391— FunctionTooLong — flowd::ai_project_manifest::build_manifest runs 137 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 37 over it, 1.37× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
Duplicated block (9 lines × 2) src/ai.rs:2080— src/ai.rs:2080-2088 | src/ai.rs:3260-3268 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:2080` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9 lines × 2) src/ai.rs:13527— src/ai.rs:13527-13535 | src/ai.rs:15754-15762 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:13527` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (9 lines × 2) src/ai.rs:15660— src/ai.rs:15660-15668 | src/ai.rs:15722-15730 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:15660` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9 lines × 2) src/ai_server.rs:175— src/ai_server.rs:175-183 | src/health.rs:138-146 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (9 lines × 2) src/ai_taskd.rs:771— src/ai_taskd.rs:771-779 | src/ai_taskd.rs:801-809 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai_taskd.rs:771` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9 lines × 2) src/ai_taskd.rs:783— src/ai_taskd.rs:783-791 | src/ai_taskd.rs:813-821 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (9 lines × 2) src/codex_memory.rs:1487— src/codex_memory.rs:1487-1495 | src/codex_memory.rs:1571-1579 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (9 lines × 2) src/codex_runtime.rs:801— src/codex_runtime.rs:801-810 | src/daemon_snapshot.rs:203-211 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/codex_runtime.rs:801` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (9 lines × 2) src/codex_runtime.rs:853— src/codex_runtime.rs:853-861 | src/codex_runtime.rs:883-891 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (9 lines × 2) src/codex_skill_eval.rs:129— src/codex_skill_eval.rs:129-137 | src/codex_skill_eval.rs:164-172 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/codex_skill_eval.rs:129` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9 lines × 2) src/codex_telemetry.rs:653— src/codex_telemetry.rs:653-661 | src/codex_telemetry.rs:751-759 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/codex_telemetry.rs:653` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9 lines × 2) src/commit.rs:12551— src/commit.rs:12551-12559 | src/commit.rs:12575-12583 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:12551` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/commit.rs:12574` calls `current_dir` and `src/commit.rs:12550` does not — after which the two agree again for 4 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (9 lines × 2) src/commit.rs:15285— src/commit.rs:15285-15293 | src/commit.rs:15395-15408 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:15285` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (9 lines × 2) src/deploy.rs:2213— src/deploy.rs:2213-2221 | src/deploy.rs:2249-2257 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (9 lines × 2) src/deploy_setup.rs:273— src/deploy_setup.rs:273-281 | src/env_setup.rs:244-252 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy_setup.rs:273` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9 lines × 2) src/env.rs:3399— src/env.rs:3399-3407 | src/env.rs:3503-3511 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/env.rs:3399` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9 lines × 2) src/explain_commits.rs:103— src/explain_commits.rs:103-111 | src/sync.rs:5476-5484 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/explain_commits.rs:103` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9 lines × 2) src/gh_release.rs:110— src/gh_release.rs:110-118 | src/publish.rs:303-311 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/gh_release.rs:110` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9 lines × 2) src/info.rs:112— src/info.rs:112-120 | src/repo_capsule.rs:924-932 — before extracting anything, compare `src/info.rs` and `src/repo_capsule.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 49 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/info.rs:112` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9 lines × 2) src/install.rs:930— src/install.rs:930-938 | src/registry.rs:657-665 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/install.rs:930` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9 lines × 2) src/macos.rs:309— src/macos.rs:309-317 | src/macos.rs:367-375 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/macos.rs:309` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9 lines × 2) src/publish.rs:297— src/publish.rs:297-305 | src/publish.rs:460-468 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (9 lines × 2) src/repos.rs:639— src/repos.rs:639-647 | src/repos.rs:1503-1511 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (9 lines × 2) src/skills.rs:572— src/skills.rs:572-580 | src/tools.rs:240-248 — before extracting anything, compare `src/skills.rs` and `src/tools.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 37 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/skills.rs:572` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9 lines × 2) src/sync.rs:5798— src/sync.rs:5798-5806 | src/upstream.rs:650-658 — before extracting anything, compare `src/sync.rs` and `src/upstream.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 50 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/sync.rs:5798` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
FileTooLong: src/ai.rs src/ai.rs— FileTooLong — 11731 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 479 free functions. The bar is 500 significant lines; this is 11231 over it, 23.46× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/commit.rs src/commit.rs— FileTooLong — 11307 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 391 free functions. The bar is 500 significant lines; this is 10807 over it, 22.61× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/sync.rs src/sync.rs— FileTooLong — 4197 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 166 free functions. The bar is 500 significant lines; this is 3697 over it, 8.39× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/cli.rs src/cli.rs— FileTooLong — 3310 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted). The bar is 500 significant lines; this is 2810 over it, 6.62× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/env.rs src/env.rs— FileTooLong — 2874 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 125 free functions. The bar is 500 significant lines; this is 2374 over it, 5.75× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/tasks.rs src/tasks.rs— FileTooLong — 2255 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 89 free functions. The bar is 500 significant lines; this is 1755 over it, 4.51× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/deploy.rs src/deploy.rs— FileTooLong — 2216 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 102 free functions. The bar is 500 significant lines; this is 1716 over it, 4.43× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/setup.rs src/setup.rs— FileTooLong — 2082 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 100 free functions. The bar is 500 significant lines; this is 1582 over it, 4.16× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/jj.rs src/jj.rs— FileTooLong — 2020 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 106 free functions. The bar is 500 significant lines; this is 1520 over it, 4.04× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/config.rs src/config.rs— FileTooLong — 1926 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 58 free functions. The bar is 500 significant lines; this is 1426 over it, 3.85× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/codex_session_docs.rs src/codex_session_docs.rs— FileTooLong — 1505 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 68 free functions. The bar is 500 significant lines; this is 1005 over it, 3.01× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/pr_preview.rs src/pr_preview.rs— FileTooLong — 1491 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 52 free functions. The bar is 500 significant lines; this is 991 over it, 2.98× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/codex_memory.rs src/codex_memory.rs— FileTooLong — 1455 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 51 free functions. The bar is 500 significant lines; this is 955 over it, 2.91× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/repos.rs src/repos.rs— FileTooLong — 1416 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 60 free functions. The bar is 500 significant lines; this is 916 over it, 2.83× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/sync_plan.rs src/sync_plan.rs— FileTooLong — 1337 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 59 free functions. The bar is 500 significant lines; this is 837 over it, 2.67× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/code.rs src/code.rs— FileTooLong — 1178 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 54 free functions. The bar is 500 significant lines; this is 678 over it, 2.36× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: bin/flow-workspace-bootstrap.rs src/bin/flow-workspace-bootstrap.rs— FileTooLong — 1152 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 56 free functions. The bar is 500 significant lines; this is 652 over it, 2.30× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/updates.rs src/updates.rs— FileTooLong — 1151 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 44 free functions. The bar is 500 significant lines; this is 651 over it, 2.30× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/deps.rs src/deps.rs— FileTooLong — 1030 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 56 free functions. The bar is 500 significant lines; this is 530 over it, 2.06× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/workflow.rs src/workflow.rs— FileTooLong — 1026 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 43 free functions. The bar is 500 significant lines; this is 526 over it, 2.05× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/url_inspect.rs src/url_inspect.rs— FileTooLong — 1025 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 45 free functions. The bar is 500 significant lines; this is 525 over it, 2.05× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/skills.rs src/skills.rs— FileTooLong — 968 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 54 free functions. The bar is 500 significant lines; this is 468 over it, 1.94× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/ai_everruns.rs src/ai_everruns.rs— FileTooLong — 962 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted). The bar is 500 significant lines; this is 462 over it, 1.92× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/supervisor.rs src/supervisor.rs— FileTooLong — 904 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 52 free functions. The bar is 500 significant lines; this is 404 over it, 1.81× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: src/agents.rs src/agents.rs— FileTooLong — 888 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), declaring 43 free functions. The bar is 500 significant lines; this is 388 over it, 1.78× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
Duplicated block (10 lines × 2) crates/seq_everruns_bridge/src/maple.rs:422— crates/seq_everruns_bridge/src/maple.rs:422-431 | crates/seq_everruns_bridge/src/maple.rs:441-450 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `crates/seq_everruns_bridge/src/maple.rs:422` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (10 lines × 2) src/ai.rs:10922— src/ai.rs:10922-10931 | src/ai.rs:10953-10962 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:10922` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (10 lines × 2) src/ai.rs:13311— src/ai.rs:13311-13320 | src/ai.rs:13873-13882 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/ai.rs:13322` calls `is_none`, `stdin`, `is_terminal` and `src/ai.rs:13885` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (10 lines × 2) src/code.rs:75— src/code.rs:75-85 | src/ssh.rs:396-405 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/code.rs:75` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (10 lines × 2) src/code.rs:1056— src/code.rs:1056-1065 | src/code.rs:1137-1146 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/code.rs:1056` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (10 lines × 2) src/commit.rs:6499— src/commit.rs:6499-6508 | src/commit.rs:12808-12817 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (10 lines × 2) src/commit.rs:9616— src/commit.rs:9616-9625 | src/commit.rs:11722-11731 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:9616` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (10 lines × 2) src/commit.rs:12567— src/commit.rs:12567-12576 | src/sync.rs:5470-5479 — before extracting anything, compare `src/commit.rs` and `src/sync.rs` as WHOLE FILES: this scan already matched 13 separate duplicated blocks between them, totalling at least 152 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (10 lines × 2) src/env.rs:1647— src/env.rs:1647-1657 | src/env.rs:1843-1852 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (10 lines × 2) src/env.rs:3985— src/env.rs:3985-3994 | src/env.rs:4109-4118 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/env.rs:3985` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (10 lines × 2) src/ext.rs:387— src/ext.rs:387-396 | src/jj.rs:3385-3394 — before extracting anything, compare `src/ext.rs` and `src/jj.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 51 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (10 lines × 2) src/git_guard.rs:427— src/git_guard.rs:427-436 | src/undo.rs:60-69 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/git_guard.rs:427` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (10 lines × 2) src/history.rs:87— src/history.rs:87-96 | src/history.rs:126-135 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (10 lines × 2) src/jd.rs:642— src/jd.rs:642-651 | src/supervisor.rs:1247-1256 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (10 lines × 2) src/processes.rs:228— src/processes.rs:228-237 | src/tasks.rs:1542-1551 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (10 lines × 2) src/publish.rs:673— src/publish.rs:673-682 | src/push.rs:321-330 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (10 lines × 2) src/setup.rs:963— src/setup.rs:963-972 | src/setup.rs:988-997 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/setup.rs:963` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (10 lines × 2) src/supervisor.rs:110— src/supervisor.rs:110-119 | src/supervisor.rs:136-145 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/supervisor.rs:110` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (10 lines × 2) src/supervisor.rs:579— src/supervisor.rs:579-588 | src/supervisor.rs:601-610 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (10 lines × 2) src/sync.rs:5452— src/sync.rs:5452-5461 | src/sync.rs:5478-5487 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/sync.rs:5452` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/sync.rs:5477` calls `current_dir` and `src/sync.rs:5451` does not — after which the two agree again for 4 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (10 lines × 2) src/sync_plan.rs:1221— src/sync_plan.rs:1221-1230 | src/updates.rs:1193-1202 — before extracting anything, compare `src/sync_plan.rs` and `src/updates.rs` as WHOLE FILES: this scan already matched 15 separate duplicated blocks between them, totalling at least 231 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (10 lines × 2) src/traces.rs:170— src/traces.rs:170-179 | src/traces.rs:260-269 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/traces.rs:170` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (10 lines × 2) src/codex_session_docs.rs:1879— src/codex_session_docs.rs:1879-1888 | src/repo_capsule.rs:986-995 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (10 lines × 2) src/commit.rs:12483— src/commit.rs:12483-12492 | src/sync.rs:5383-5392 — before extracting anything, compare `src/commit.rs` and `src/sync.rs` as WHOLE FILES: this scan already matched 13 separate duplicated blocks between them, totalling at least 152 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (10 lines × 2) src/commit.rs:12513— src/commit.rs:12513-12522 | src/sync.rs:5413-5422 — before extracting anything, compare `src/commit.rs` and `src/sync.rs` as WHOLE FILES: this scan already matched 13 separate duplicated blocks between them, totalling at least 152 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (6 lines × 2) src/ai.rs:13578— src/ai.rs:13578-13583 | src/ai.rs:15658-15663 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:13578` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (6 lines × 2) src/codex_runtime.rs:842— src/codex_runtime.rs:842-847 | src/codex_runtime.rs:870-875 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/codex_runtime.rs:842` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (6 lines × 2) src/commit.rs:10989— src/commit.rs:10989-10994 | src/commit.rs:11325-11330 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/commit.rs:11331` calls `push_str` and `src/commit.rs:10995` does not — after which the two agree again for 4 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (6 lines × 2) src/deploy.rs:588— src/deploy.rs:588-593 | src/deploy.rs:1808-1813 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (6 lines × 2) src/deploy.rs:1759— src/deploy.rs:1759-1764 | src/deploy.rs:1774-1779 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (6 lines × 2) src/help_search.rs:81— src/help_search.rs:81-86 | src/tasks.rs:749-754 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (6 lines × 2) src/log_server.rs:163— src/log_server.rs:163-168 | src/server.rs:130-135 — before extracting anything, compare `src/log_server.rs` and `src/server.rs` as WHOLE FILES: this scan already matched 18 separate duplicated blocks between them, totalling at least 276 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (6 lines × 2) src/repos.rs:1685— src/repos.rs:1685-1690 | src/repos.rs:1703-1708 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/repos.rs:1685` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (6 lines × 2) src/setup.rs:2462— src/setup.rs:2462-2467 | src/setup.rs:2554-2559 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/setup.rs:2462` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (6 lines × 2) src/upstream.rs:186— src/upstream.rs:186-191 | src/upstream.rs:471-476 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/upstream.rs:186` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (6 lines × 2) src/codex_session_index.rs:428— src/codex_session_index.rs:428-433 | src/codex_session_index.rs:503-508 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (6 lines × 2) src/commit.rs:3533— src/commit.rs:3533-3538 | src/commit.rs:3568-3573 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (6 lines × 2) src/commit.rs:14068— src/commit.rs:14068-14073 | src/commit.rs:14079-14084 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:14068` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (6 lines × 2) src/proxy/summary.rs:213— src/proxy/summary.rs:213-218 | src/proxy/summary.rs:239-244 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/proxy/summary.rs:245` calls `upstream_latency_us` and `src/proxy/summary.rs:219` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (6 lines × 2) src/usage.rs:431— src/usage.rs:431-436 | src/usage.rs:446-451 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/usage.rs:431` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (6 lines × 2) crates/seq_everruns_bridge/src/lib.rs:298— crates/seq_everruns_bridge/src/lib.rs:298-303 | src/ai_everruns.rs:1210-1215 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice.
Duplicated block (6 lines × 2) src/ai.rs:8922— src/ai.rs:8922-8927 | src/jd.rs:232-237 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (6 lines × 2) src/ai.rs:11826— src/ai.rs:11826-11831 | src/commit.rs:10119-10124 — before extracting anything, compare `src/ai.rs` and `src/commit.rs` as WHOLE FILES: this scan already matched 5 separate duplicated blocks between them, totalling at least 61 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (6 lines × 2) src/ask.rs:547— src/ask.rs:547-552 | src/task_match.rs:286-291 — before extracting anything, compare `src/ask.rs` and `src/task_match.rs` as WHOLE FILES: this scan already matched 7 separate duplicated blocks between them, totalling at least 166 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (6 lines × 2) src/config.rs:2891— src/config.rs:2891-2896 | src/repos.rs:1525-1530 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (6 lines × 2) src/hub.rs:108— src/hub.rs:108-113 | src/tasks.rs:3354-3359 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (6 lines × 2) src/processes.rs:220— src/processes.rs:220-225 | src/tasks.rs:1534-1539 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (6 lines × 2) src/sync_plan.rs:1443— src/sync_plan.rs:1443-1448 | src/updates.rs:1361-1366 — before extracting anything, compare `src/sync_plan.rs` and `src/updates.rs` as WHOLE FILES: this scan already matched 15 separate duplicated blocks between them, totalling at least 231 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (6 lines × 2) src/codex_session_docs.rs:1571— src/codex_session_docs.rs:1571-1576 | src/codex_skill_eval.rs:306-312 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/codex_session_docs.rs:1571` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/codex_skill_eval.rs:314` calls `mirror_skill_eval_event` and `src/codex_session_docs.rs:1578` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (6 lines × 2) src/push.rs:373— src/push.rs:373-378 | src/sync.rs:2623-2628 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/push.rs:373` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note first that the copies are not typed on the same thing: the declarations holding them bind `args` to `&[&str]` in one and `&[String]` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (11 lines × 2) src/ai.rs:1497— src/ai.rs:1497-1507 | src/ai.rs:1512-1522 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:1497` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (11 lines × 2) src/ai.rs:5691— src/ai.rs:5691-5701 | src/ai.rs:5767-5777 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (11 lines × 2) src/code.rs:344— src/code.rs:344-354 | src/code.rs:364-374 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/code.rs:376` calls `which`, `is_err` and `src/code.rs:356` does not — after which the two agree again for 3 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (11 lines × 2) src/codex_skill_eval.rs:147— src/codex_skill_eval.rs:147-157 | src/codex_skill_eval.rs:185-195 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/codex_skill_eval.rs:147` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (11 lines × 2) src/commit.rs:916— src/commit.rs:916-926 | src/commit.rs:1195-1205 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:916` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (11 lines × 2) src/commit.rs:953— src/commit.rs:953-963 | src/commit.rs:1232-1242 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:953` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (11 lines × 2) src/commit.rs:2767— src/commit.rs:2767-2777 | src/commit.rs:2812-2822 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:2767` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (11 lines × 2) src/commit.rs:8496— src/commit.rs:8496-8506 | src/release_signing.rs:218-228 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (11 lines × 2) src/commit.rs:10995— src/commit.rs:10995-11005 | src/commit.rs:11332-11342 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/commit.rs:11331` calls `push_str` and `src/commit.rs:10994` does not — after which the two agree again for 4 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (11 lines × 2) src/commit.rs:12307— src/commit.rs:12307-12317 | src/commit.rs:12329-12339 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:12307` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/commit.rs:12328` calls `current_dir` and `src/commit.rs:12306` does not — after which the two agree again for 4 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (11 lines × 2) src/commit.rs:12344— src/commit.rs:12344-12354 | src/commit.rs:12458-12468 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:12344` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (11 lines × 2) src/deploy.rs:2780— src/deploy.rs:2780-2790 | src/url_inspect.rs:951-961 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (11 lines × 2) src/deploy_setup.rs:855— src/deploy_setup.rs:855-865 | src/env_setup.rs:754-764 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (11 lines × 2) src/domains.rs:257— src/domains.rs:257-267 | src/domains.rs:683-693 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (11 lines × 2) src/env.rs:1647— src/env.rs:1647-1657 | src/env.rs:2346-2356 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (11 lines × 2) src/gitignore_policy.rs:378— src/gitignore_policy.rs:378-388 | src/push_hook.rs:231-241 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/gitignore_policy.rs:378` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (11 lines × 2) src/help_search.rs:83— src/help_search.rs:83-93 | src/publish.rs:91-101 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (11 lines × 2) src/hive.rs:207— src/hive.rs:207-217 | src/hive.rs:235-245 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/hive.rs:207` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (11 lines × 2) src/log_server.rs:363— src/log_server.rs:363-373 | src/server.rs:263-273 — before extracting anything, compare `src/log_server.rs` and `src/server.rs` as WHOLE FILES: this scan already matched 18 separate duplicated blocks between them, totalling at least 276 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (11 lines × 2) src/notify.rs:56— src/notify.rs:56-66 | src/notify.rs:148-158 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/notify.rs:56` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (11 lines × 2) src/push.rs:113— src/push.rs:113-123 | src/push.rs:128-138 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/push.rs:113` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (11 lines × 2) src/rl_signals.rs:96— src/rl_signals.rs:96-106 | src/rl_signals.rs:111-121 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/rl_signals.rs:96` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (11 lines × 2) src/setup.rs:589— src/setup.rs:589-599 | src/setup.rs:664-674 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/setup.rs:589` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (11 lines × 2) src/ssh.rs:332— src/ssh.rs:332-342 | src/ssh.rs:351-361 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (11 lines × 2) src/sync.rs:2345— src/sync.rs:2345-2355 | src/sync.rs:4012-4022 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (7 lines × 2) src/ai.rs:2207— src/ai.rs:2207-2213 | src/ai.rs:14329-14335 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:2207` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (7 lines × 2) src/ai.rs:2334— src/ai.rs:2334-2340 | src/ai.rs:2349-2355 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:2334` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (7 lines × 2) src/ai.rs:3009— src/ai.rs:3009-3016 | src/ai.rs:3381-3387 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (7 lines × 2) src/ai.rs:7305— src/ai.rs:7305-7311 | src/ai.rs:7358-7364 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (7 lines × 2) src/ai.rs:13543— src/ai.rs:13543-13549 | src/ai.rs:13600-13606 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (7 lines × 2) src/codex_telemetry.rs:268— src/codex_telemetry.rs:268-274 | src/codex_telemetry.rs:276-282 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/codex_telemetry.rs:268` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (7 lines × 2) src/commit.rs:5737— src/commit.rs:5737-5743 | src/commit.rs:5870-5877 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (7 lines × 2) src/domains.rs:271— src/domains.rs:271-277 | src/domains.rs:294-300 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (7 lines × 2) src/env.rs:1914— src/env.rs:1914-1920 | src/env.rs:3274-3280 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (7 lines × 2) src/failure.rs:192— src/failure.rs:192-199 | src/failure.rs:252-258 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/failure.rs:192` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (7 lines × 2) src/jd.rs:490— src/jd.rs:490-496 | src/supervisor.rs:659-665 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it. Note first that the copies are not typed on the same thing: the declarations holding them bind `stream` to `UnixStream` in one and `std::os::unix::net::UnixStream` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (7 lines × 2) src/log_server.rs:848— src/log_server.rs:848-854 | src/log_server.rs:909-915 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/log_server.rs:848` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (7 lines × 2) src/pr_edit.rs:262— src/pr_edit.rs:262-268 | src/pr_edit.rs:373-379 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/pr_edit.rs:262` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (7 lines × 2) src/publish.rs:167— src/publish.rs:167-173 | src/publish.rs:544-550 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/publish.rs:167` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (7 lines × 2) src/push_hook.rs:216— src/push_hook.rs:216-223 | src/recipe.rs:679-685 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/push_hook.rs:216` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (7 lines × 2) src/ai.rs:1837— src/ai.rs:1837-1843 | src/commit.rs:12591-12597 — before extracting anything, compare `src/ai.rs` and `src/commit.rs` as WHOLE FILES: this scan already matched 5 separate duplicated blocks between them, totalling at least 61 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (7 lines × 2) src/ai_server.rs:259— src/ai_server.rs:259-265 | src/health.rs:386-392 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (7 lines × 2) src/ai_taskd.rs:964— src/ai_taskd.rs:964-970 | src/bin/ai_taskd_client.rs:308-314 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice.
Duplicated block (7 lines × 2) src/codex_memory.rs:764— src/codex_memory.rs:764-770 | src/repo_capsule.rs:997-1003 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (7 lines × 2) src/commit.rs:4681— src/commit.rs:4681-4687 | src/skills.rs:1103-1109 — before extracting anything, compare `src/commit.rs` and `src/skills.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 58 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (7 lines × 2) src/domains.rs:906— src/domains.rs:906-912 | src/ssh.rs:312-318 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (7 lines × 2) src/commit.rs:10723— src/commit.rs:10723-10729 | src/commit.rs:10896-10903 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/commit.rs:10904` calls `push_str` and `src/commit.rs:10730` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (7 lines × 2) src/deploy_setup.rs:436— src/deploy_setup.rs:436-442 | src/env_setup.rs:424-430 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy_setup.rs:436` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (7 lines × 2) src/deploy_setup.rs:557— src/deploy_setup.rs:557-563 | src/env_setup.rs:490-496 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/deploy_setup.rs:556` calls `relative_display`, `worker_path` and `src/env_setup.rs:489` does not — after which the two agree again for 4 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (7 lines × 2) src/explain_commits.rs:628— src/explain_commits.rs:628-634 | src/explain_commits.rs:702-708 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/explain_commits.rs:628` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (8 lines × 2) src/agents.rs:539— src/agents.rs:539-546 | src/palette.rs:134-141 — before extracting anything, compare `src/agents.rs` and `src/palette.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 33 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (8 lines × 2) src/ai.rs:4506— src/ai.rs:4506-4513 | src/ai.rs:5568-5575 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/ai.rs:4505` calls `arg` and `src/ai.rs:5567` does not — after which the two agree again for 4 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (8 lines × 2) src/codex_runtime.rs:320— src/codex_runtime.rs:320-327 | src/codex_skill_eval.rs:235-242 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/codex_runtime.rs:320` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 2) src/commit.rs:12871— src/commit.rs:12871-12878 | src/commit.rs:12956-12963 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:12871` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 2) src/deploy.rs:312— src/deploy.rs:312-319 | src/deploy.rs:423-430 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy.rs:312` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 2) src/deploy.rs:1251— src/deploy.rs:1251-1258 | src/deploy.rs:2700-2707 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy.rs:1251` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 2) src/deploy_setup.rs:418— src/deploy_setup.rs:418-425 | src/env_setup.rs:378-385 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy_setup.rs:418` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note first that the copies are not typed on the same thing: the declarations holding them bind `app` to `&DeploySetupApp` in one and `&EnvSetupApp` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (8 lines × 2) src/fish_install.rs:146— src/fish_install.rs:146-153 | src/install.rs:952-959 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Note first that the copies are not typed on the same thing: the declarations holding them bind `path` to `&PathBuf` in one and `&Path` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (8 lines × 2) src/jazz_state.rs:106— src/jazz_state.rs:106-113 | src/jazz_state_stub.rs:26-33 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (8 lines × 2) src/publish.rs:719— src/publish.rs:719-726 | src/push.rs:349-356 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (8 lines × 2) src/sealer_crypto.rs:47— src/sealer_crypto.rs:47-54 | src/sealer_crypto.rs:66-73 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (8 lines × 2) src/sync.rs:4921— src/sync.rs:4921-4928 | src/sync.rs:5012-5019 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/sync.rs:4921` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 2) src/tasks.rs:1198— src/tasks.rs:1198-1205 | src/tasks.rs:1218-1225 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/tasks.rs:1198` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 2) src/tasks.rs:2258— src/tasks.rs:2258-2265 | src/tasks.rs:2381-2390 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/tasks.rs:2381` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 2) src/codex_telemetry.rs:663— src/codex_telemetry.rs:663-670 | src/codex_telemetry.rs:769-776 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (8 lines × 2) src/commit.rs:7080— src/commit.rs:7080-7087 | src/updates.rs:1523-1530 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (8 lines × 2) src/commit.rs:12534— src/commit.rs:12534-12541 | src/sync.rs:5434-5441 — before extracting anything, compare `src/commit.rs` and `src/sync.rs` as WHOLE FILES: this scan already matched 13 separate duplicated blocks between them, totalling at least 152 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (8 lines × 2) src/deploy_setup.rs:774— src/deploy_setup.rs:774-781 | src/env_setup.rs:691-698 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (8 lines × 2) src/sync_plan.rs:85— src/sync_plan.rs:85-92 | src/updates.rs:59-66 — before extracting anything, compare `src/sync_plan.rs` and `src/updates.rs` as WHOLE FILES: this scan already matched 15 separate duplicated blocks between them, totalling at least 231 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (8 lines × 2) src/env.rs:1994— src/env.rs:1994-2001 | src/hash.rs:65-73 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/env.rs:1994` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 2) src/ai.rs:6986— src/ai.rs:6986-6993 | src/codex_session_index.rs:370-377 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:6986` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 2) src/commit.rs:8687— src/commit.rs:8687-8694 | src/commit.rs:8704-8711 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:8687` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 2) src/deploy.rs:454— src/deploy.rs:454-461 | src/deploy.rs:465-472 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy.rs:454` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 2) src/codex_telemetry.rs:240— src/codex_telemetry.rs:240-247 | src/codex_telemetry.rs:254-261 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/codex_telemetry.rs:240` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (8 lines × 2) src/supervisor.rs:688— src/supervisor.rs:688-695 | src/supervisor.rs:711-718 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/supervisor.rs:688` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/supervisor.rs:709` calls `stop_daemon_with_path`, `as_deref`, `ok` and `src/supervisor.rs:687` does not — after which the two agree again for 3 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (5 lines × 2) src/bin/flow-workspace-bootstrap.rs:1402— src/bin/flow-workspace-bootstrap.rs:1402-1407 | src/domains.rs:443-447 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice.
Duplicated block (5 lines × 2) src/commits.rs:180— src/commits.rs:180-186 | src/commits.rs:445-449 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/commits.rs:187` calls `contains` and `src/commits.rs:451` does not — after which the two agree again for 3 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (5 lines × 2) src/deploy.rs:649— src/deploy.rs:649-653 | src/sync.rs:339-343 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (5 lines × 2) src/flow_config.rs:826— src/flow_config.rs:826-830 | src/home.rs:439-443 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/flow_config.rs:826` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/flow_config.rs:831` calls `prune_empty_generated_parents`, `parent` and `src/home.rs:444` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (5 lines × 2) src/home.rs:826— src/home.rs:826-830 | src/repos.rs:1743-1748 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (5 lines × 2) src/ai_project_manifest.rs:241— src/ai_project_manifest.rs:241-245 | src/codex_session_docs.rs:1909-1913 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (5 lines × 2) src/code.rs:795— src/code.rs:795-799 | src/ext.rs:173-177 — before extracting anything, compare `src/code.rs` and `src/ext.rs` as WHOLE FILES: this scan already matched 5 separate duplicated blocks between them, totalling at least 57 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (5 lines × 2) src/commit.rs:12507— src/commit.rs:12507-12511 | src/sync.rs:5407-5411 — before extracting anything, compare `src/commit.rs` and `src/sync.rs` as WHOLE FILES: this scan already matched 13 separate duplicated blocks between them, totalling at least 152 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (5 lines × 2) src/deploy.rs:736— src/deploy.rs:736-740 | src/release.rs:11-15 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (5 lines × 2) src/processes.rs:239— src/processes.rs:239-243 | src/tasks.rs:1553-1557 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (5 lines × 2) src/env.rs:503— src/env.rs:503-507 | src/ssh.rs:306-310 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (5 lines × 2) src/install.rs:708— src/install.rs:708-712 | src/install.rs:752-759 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (5 lines × 2) src/install.rs:685— src/install.rs:685-689 | src/install.rs:739-745 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/install.rs:685` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (5 lines × 2) src/sync.rs:1417— src/sync.rs:1417-1421 | src/sync.rs:1633-1638 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/sync.rs:1417` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (5 lines × 2) src/ext.rs:147— src/ext.rs:147-151 | src/todo.rs:60-64 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/ext.rs:147` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (5 lines × 2) src/server.rs:566— src/server.rs:566-570 | src/server.rs:669-673 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/server.rs:566` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (5 lines × 2) src/failure.rs:305— src/failure.rs:305-309 | src/trace.rs:76-80 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (5 lines × 2) src/ai.rs:10039— src/ai.rs:10039-10043 | src/ai.rs:10339-10343 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:10039` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (5 lines × 2) src/push.rs:224— src/push.rs:224-228 | src/push.rs:230-234 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (5 lines × 2) src/code.rs:719— src/code.rs:719-723 | src/code.rs:741-745 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/code.rs:746` calls `update_codex_sessions` and `src/code.rs:724` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (5 lines × 2) src/env.rs:2030— src/env.rs:2030-2034 | src/env.rs:2038-2042 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (5 lines × 2) src/failure.rs:521— src/failure.rs:521-525 | src/tasks.rs:2161-2165 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (5 lines × 2) src/log_server.rs:514— src/log_server.rs:514-518 | src/server.rs:412-416 — before extracting anything, compare `src/log_server.rs` and `src/server.rs` as WHOLE FILES: this scan already matched 18 separate duplicated blocks between them, totalling at least 276 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/log_server.rs:514` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (5 lines × 2) scripts/build_rl_runtime_dataset.py:253— scripts/build_rl_runtime_dataset.py:253-257 | scripts/build_rl_runtime_dataset.py:312-316 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (12 lines × 2) src/ai.rs:2603— src/ai.rs:2603-2614 | src/codex_text.rs:43-54 — before extracting anything, compare `src/ai.rs` and `src/codex_text.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 48 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (12 lines × 2) src/ai.rs:15508— src/ai.rs:15508-15519 | src/ai.rs:15543-15554 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:15508` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (12 lines × 2) src/code.rs:278— src/code.rs:278-289 | src/code.rs:593-604 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (12 lines × 2) src/codex_session_docs.rs:801— src/codex_session_docs.rs:801-812 | src/codex_session_docs.rs:1194-1205 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (12 lines × 2) src/codex_skill_eval.rs:427— src/codex_skill_eval.rs:427-438 | src/codex_skill_eval.rs:442-453 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/codex_skill_eval.rs:427` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12 lines × 2) src/codex_skill_eval.rs:682— src/codex_skill_eval.rs:682-693 | src/history.rs:283-294 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (12 lines × 2) src/commit.rs:2467— src/commit.rs:2467-2478 | src/commit.rs:2529-2540 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:2467` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (12 lines × 2) src/commit.rs:5221— src/commit.rs:5221-5232 | src/commit.rs:5351-5362 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (12 lines × 2) src/commit.rs:5911— src/commit.rs:5911-5922 | src/invariants.rs:293-304 — before extracting anything, compare `src/commit.rs` and `src/invariants.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 40 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (12 lines × 2) src/commit.rs:13652— src/commit.rs:13652-13663 | src/todo.rs:287-298 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/todo.rs:299` calls `is_empty`, `to_string` and `src/commit.rs:13664` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (12 lines × 2) src/commit.rs:13826— src/commit.rs:13826-13837 | src/publish.rs:642-653 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (12 lines × 2) src/deploy_setup.rs:594— src/deploy_setup.rs:594-605 | src/env_setup.rs:520-531 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy_setup.rs:594` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (12 lines × 2) src/deploy_setup.rs:608— src/deploy_setup.rs:608-619 | src/env_setup.rs:533-544 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy_setup.rs:608` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12 lines × 2) src/failure.rs:579— src/failure.rs:579-590 | src/vcs.rs:56-67 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/failure.rs:579` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12 lines × 2) src/home.rs:723— src/home.rs:723-734 | src/home.rs:758-769 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/home.rs:723` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12 lines × 2) src/log_server.rs:449— src/log_server.rs:449-460 | src/server.rs:349-360 — before extracting anything, compare `src/log_server.rs` and `src/server.rs` as WHOLE FILES: this scan already matched 18 separate duplicated blocks between them, totalling at least 276 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/log_server.rs:449` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12 lines × 2) src/log_server.rs:575— src/log_server.rs:575-586 | src/server.rs:472-483 — before extracting anything, compare `src/log_server.rs` and `src/server.rs` as WHOLE FILES: this scan already matched 18 separate duplicated blocks between them, totalling at least 276 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/log_server.rs:575` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12 lines × 2) src/setup.rs:1868— src/setup.rs:1868-1879 | src/setup.rs:1925-1936 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (12 lines × 2) src/sync.rs:615— src/sync.rs:615-626 | src/sync.rs:792-803 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/sync.rs:615` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/sync.rs:627` calls `current_dir` and `src/sync.rs:804` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (12 lines × 2) src/sync.rs:1881— src/sync.rs:1881-1892 | src/sync.rs:3852-3863 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/sync.rs:1881` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12 lines × 2) src/tasks.rs:2653— src/tasks.rs:2653-2664 | src/tasks.rs:2950-2961 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/tasks.rs:2653` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12 lines × 2) src/ai.rs:2589— src/ai.rs:2589-2600 | src/codex_text.rs:2-13 — before extracting anything, compare `src/ai.rs` and `src/codex_text.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 48 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (12 lines × 2) scripts/ai-taskd-launchd.py:61— scripts/ai-taskd-launchd.py:61-72 | scripts/codex-skill-eval-launchd.py:98-109 — before extracting anything, compare `scripts/ai-taskd-launchd.py` and `scripts/codex-skill-eval-launchd.py` as WHOLE FILES: this scan already matched 6 separate duplicated blocks between them, totalling at least 59 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (13 lines × 2) src/ai.rs:2997— src/ai.rs:2997-3009 | src/ai.rs:3050-3062 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:2997` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (13 lines × 2) src/ai_project_manifest.rs:141— src/ai_project_manifest.rs:141-153 | src/project_snapshot.rs:267-279 — before extracting anything, compare `src/ai_project_manifest.rs` and `src/project_snapshot.rs` as WHOLE FILES: this scan already matched 5 separate duplicated blocks between them, totalling at least 41 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai_project_manifest.rs:141` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (13 lines × 2) src/commit.rs:668— src/commit.rs:668-680 | src/commit.rs:693-705 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:668` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (13 lines × 2) src/commit.rs:4746— src/commit.rs:4746-4758 | src/commit.rs:4779-4791 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:4746` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/commit.rs:4775` calls `get`, `is_some`, `is_none` and `src/commit.rs:4745` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (13 lines × 2) src/commit.rs:12775— src/commit.rs:12775-12787 | src/commit.rs:12837-12849 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/commit.rs:12834` calls `openrouter_api_key`, `openrouter_model_id` and `src/commit.rs:12774` does not — after which the two agree again for 3 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (13 lines × 2) src/deploy.rs:2793— src/deploy.rs:2793-2805 | src/url_inspect.rs:964-976 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (13 lines × 2) src/deploy_setup.rs:571— src/deploy_setup.rs:571-583 | src/env_setup.rs:500-512 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy_setup.rs:571` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (13 lines × 2) src/env.rs:1518— src/env.rs:1518-1530 | src/env.rs:1557-1569 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/env.rs:1518` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (13 lines × 2) src/env.rs:1612— src/env.rs:1612-1624 | src/env.rs:2535-2547 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/env.rs:1612` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/env.rs:1608` calls `is_empty` and `src/env.rs:2533` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (13 lines × 2) src/env.rs:1960— src/env.rs:1960-1972 | src/env.rs:2168-2180 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/env.rs:1960` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (13 lines × 2) src/git_guard.rs:371— src/git_guard.rs:371-383 | src/jj.rs:3557-3569 — before extracting anything, compare `src/git_guard.rs` and `src/jj.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 35 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (13 lines × 2) src/gitignore_policy.rs:551— src/gitignore_policy.rs:551-563 | src/gitignore_policy.rs:586-598 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/gitignore_policy.rs:551` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (13 lines × 2) src/repos.rs:64— src/repos.rs:64-76 | src/repos.rs:390-402 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (13 lines × 2) src/sync.rs:4562— src/sync.rs:4562-4574 | src/sync.rs:5501-5513 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/sync.rs:4562` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/sync.rs:4561` calls `filter`, `contains` and `src/sync.rs:5500` does not — after which the two agree again for 4 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (13 lines × 2) src/commit.rs:14143— src/commit.rs:14143-14155 | src/skills.rs:701-713 — before extracting anything, compare `src/commit.rs` and `src/skills.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 58 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:14143` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (13 lines × 2) src/commit.rs:6341— src/commit.rs:6341-6353 | src/commit.rs:6380-6392 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:6341` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (13 lines × 2) src/supervisor.rs:306— src/supervisor.rs:306-318 | src/supervisor.rs:437-449 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/supervisor.rs:306` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (13 lines × 2) scripts/ai-taskd-launchd.py:19— scripts/ai-taskd-launchd.py:19-31 | scripts/codex-skill-eval-launchd.py:19-31 — before extracting anything, compare `scripts/ai-taskd-launchd.py` and `scripts/codex-skill-eval-launchd.py` as WHOLE FILES: this scan already matched 6 separate duplicated blocks between them, totalling at least 59 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
D4 · Code Duplication· Edited copy of a member (12 corresponding lines) · ×16
Edited copy of a member (12 corresponding lines) src/usage.rs:425— src/usage.rs:425-436 | src/usage.rs:438-451 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (12 corresponding lines) src/failure.rs:520— src/failure.rs:520-531 | src/tasks.rs:2160-2175 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (12 corresponding lines) src/bin/flow-workspace-bootstrap.rs:1398— src/bin/flow-workspace-bootstrap.rs:1398-1410 | src/domains.rs:442-453 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (12 corresponding lines) src/commit.rs:14619— src/commit.rs:14619-14630 | src/commit.rs:15017-15028 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (12 corresponding lines) src/deploy.rs:702— src/deploy.rs:702-716 | src/deploy.rs:718-729 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (12 corresponding lines) src/ask.rs:286— src/ask.rs:286-297 | src/commit.rs:2947-2960 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (12 corresponding lines) src/codex_telemetry.rs:215— src/codex_telemetry.rs:215-227 | src/recipe.rs:721-732 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (12 corresponding lines) src/sealer_crypto.rs:79— src/sealer_crypto.rs:79-90 | src/sealer_crypto.rs:92-103 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (12 corresponding lines) src/commit.rs:13577— src/commit.rs:13577-13591 | src/discover.rs:259-270 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (12 corresponding lines) src/ai.rs:1165— src/ai.rs:1165-1176 | src/env.rs:513-524 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (12 corresponding lines) src/commits.rs:389— src/commits.rs:389-401 | src/fixup.rs:190-201 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (12 corresponding lines) src/commit.rs:6546— src/commit.rs:6546-6559 | src/sync.rs:2606-2617 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (12 corresponding lines) src/ssh.rs:465— src/ssh.rs:465-476 | src/ssh.rs:478-489 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (12 corresponding lines) src/setup.rs:1159— src/setup.rs:1159-1170 | src/setup.rs:2818-2830 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (12 corresponding lines) src/codex_session_index.rs:513— src/codex_session_index.rs:513-526 | src/external_cli.rs:304-315 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (12 corresponding lines) scripts/codex_fork.py:63— scripts/codex_fork.py:63-74 | scripts/codex_j.py:48-59 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Hotspot: src/main.rs src/main.rs:44— src/main.rs changed 36 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 158 in flowd::main at line 44. 3 of those changes were fix/bug commits, and the other 33 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-01-14..2026-04-14, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-01-14 23:37:33 -07:00' --until='2026-04-14 23:37:33 -07:00' --full-history --no-merges -- src/main.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
Hotspot: src/commit.rs src/commit.rs:3898— src/commit.rs changed 37 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 95 in flowd::commit::run_with_check_sync at line 3898. 4 of those changes were fix/bug commits, and the other 33 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-01-14..2026-04-14, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-01-14 23:37:33 -07:00' --until='2026-04-14 23:37:33 -07:00' --full-history --no-merges -- src/commit.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
Hotspot: src/sync.rs src/sync.rs:1271— src/sync.rs changed 32 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 100 in flowd::sync::run_sync at line 1271. 4 of those changes were fix/bug commits, and the other 28 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-01-14..2026-04-14, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-01-14 23:37:33 -07:00' --until='2026-04-14 23:37:33 -07:00' --full-history --no-merges -- src/sync.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
Hotspot: src/ai.rs src/ai.rs:784— src/ai.rs changed 30 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 76 in flowd::ai::run at line 784. 2 of those changes were fix/bug commits, and the other 28 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-01-14..2026-04-14, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-01-14 23:37:33 -07:00' --until='2026-04-14 23:37:33 -07:00' --full-history --no-merges -- src/ai.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
Hotspot: src/tasks.rs src/tasks.rs:2552— src/tasks.rs changed 26 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 30 in flowd::tasks::run_command_with_pty at line 2552. 1 of those changes was a fix/bug commit, and the other 25 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-01-14..2026-04-14, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-01-14 23:37:33 -07:00' --until='2026-04-14 23:37:33 -07:00' --full-history --no-merges -- src/tasks.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
Hotspot: src/config.rs src/config.rs:2535— src/config.rs changed 23 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 25 in flowd::config::merge_config at line 2535. 1 of those changes was a fix/bug commit, and the other 22 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-01-14..2026-04-14, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-01-14 23:37:33 -07:00' --until='2026-04-14 23:37:33 -07:00' --full-history --no-merges -- src/config.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
Hotspot: src/env.rs src/env.rs:3688— src/env.rs changed 13 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 28 in flowd::env::fetch_env_vars at line 3688. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-01-14..2026-04-14, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-01-14 23:37:33 -07:00' --until='2026-04-14 23:37:33 -07:00' --full-history --no-merges -- src/env.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
Hotspot: src/setup.rs src/setup.rs:20— src/setup.rs changed 15 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 21 in flowd::setup::run at line 20. 2 of those changes were fix/bug commits, and the other 13 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-01-14..2026-04-14, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-01-14 23:37:33 -07:00' --until='2026-04-14 23:37:33 -07:00' --full-history --no-merges -- src/setup.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
Hotspot: src/skills.rs src/skills.rs:792— src/skills.rs changed 11 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 24 in flowd::skills::fetch_skills at line 792. 1 of those changes was a fix/bug commit, and the other 10 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-01-14..2026-04-14, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-01-14 23:37:33 -07:00' --until='2026-04-14 23:37:33 -07:00' --full-history --no-merges -- src/skills.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
Hotspot: src/repos.rs src/repos.rs:791— src/repos.rs changed 9 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 29 in flowd::repos::bootstrap_home_branch at line 791. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-01-14..2026-04-14, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-01-14 23:37:33 -07:00' --until='2026-04-14 23:37:33 -07:00' --full-history --no-merges -- src/repos.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
Hotspot: src/supervisor.rs src/supervisor.rs:895— src/supervisor.rs changed 8 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 27 in flowd::supervisor::monitor_daemons at line 895. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-01-14..2026-04-14, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-01-14 23:37:33 -07:00' --until='2026-04-14 23:37:33 -07:00' --full-history --no-merges -- src/supervisor.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
Hotspot: src/deploy.rs src/deploy.rs:877— src/deploy.rs changed 8 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 27 in flowd::deploy::deploy_host at line 877. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-01-14..2026-04-14, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-01-14 23:37:33 -07:00' --until='2026-04-14 23:37:33 -07:00' --full-history --no-merges -- src/deploy.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
Hotspot: src/code.rs src/code.rs:1335— src/code.rs changed 9 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 18 in flowd::code::copy_codex_session_file at line 1335. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-01-14..2026-04-14, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-01-14 23:37:33 -07:00' --until='2026-04-14 23:37:33 -07:00' --full-history --no-merges -- src/code.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
Hotspot: src/upgrade.rs src/upgrade.rs:551— src/upgrade.rs changed 6 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 16 in flowd::upgrade::run at line 551. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-01-14..2026-04-14, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-01-14 23:37:33 -07:00' --until='2026-04-14 23:37:33 -07:00' --full-history --no-merges -- src/upgrade.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
Hotspot: src/ai_everruns.rs src/ai_everruns.rs:160— src/ai_everruns.rs changed 3 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 18 in flowd::ai_everruns::wait_for_completion_sse at line 160. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-01-14..2026-04-14, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-01-14 23:37:33 -07:00' --until='2026-04-14 23:37:33 -07:00' --full-history --no-merges -- src/ai_everruns.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
D4 · Code Duplication· Edited copy of a member (15 corresponding lines) · ×15
Edited copy of a member (15 corresponding lines) src/ai.rs:5978— src/ai.rs:5978-5993 | src/ai.rs:5998-6012 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (15 corresponding lines) src/commit.rs:13606— src/commit.rs:13606-13624 | src/gitignore_policy.rs:695-709 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (15 corresponding lines) src/ai_project_manifest.rs:139— src/ai_project_manifest.rs:139-153 | src/project_snapshot.rs:265-279 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (15 corresponding lines) src/deploy_setup.rs:267— src/deploy_setup.rs:267-281 | src/env_setup.rs:238-252 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (15 corresponding lines) src/commit.rs:11546— src/commit.rs:11546-11561 | src/repos.rs:99-113 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (15 corresponding lines) src/ssh.rs:331— src/ssh.rs:331-348 | src/ssh.rs:350-364 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (15 corresponding lines) src/ai.rs:4703— src/ai.rs:4703-4717 | src/ai.rs:4719-4734 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (15 corresponding lines) src/commit.rs:13153— src/commit.rs:13153-13171 | src/registry.rs:496-510 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (15 corresponding lines) src/commit.rs:13651— src/commit.rs:13651-13665 | src/todo.rs:286-304 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (15 corresponding lines) src/commit.rs:8370— src/commit.rs:8370-8384 | src/daemon.rs:328-342 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (15 corresponding lines) src/env.rs:207— src/env.rs:207-222 | src/env.rs:224-238 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (15 corresponding lines) src/tasks.rs:213— src/tasks.rs:213-228 | src/tasks.rs:230-244 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (15 corresponding lines) src/env.rs:620— src/env.rs:620-634 | src/ssh_keys.rs:607-621 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (15 corresponding lines) src/agents.rs:943— src/agents.rs:943-957 | src/agents.rs:960-974 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (15 corresponding lines) scripts/bench-ai-runtime.py:59— scripts/bench-ai-runtime.py:59-73 | scripts/bench-cli-startup.py:61-83 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (11 corresponding lines) · ×13
Edited copy of a member (11 corresponding lines) src/sync_plan.rs:1589— src/sync_plan.rs:1589-1599 | src/updates.rs:1431-1441 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (11 corresponding lines) src/publish.rs:718— src/publish.rs:718-728 | src/push.rs:348-358 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (11 corresponding lines) src/info.rs:110— src/info.rs:110-120 | src/repo_capsule.rs:918-932 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (11 corresponding lines) src/config.rs:2898— src/config.rs:2898-2908 | src/undo.rs:501-514 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (11 corresponding lines) src/ext.rs:329— src/ext.rs:329-339 | src/jj.rs:3589-3600 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (11 corresponding lines) src/ask.rs:524— src/ask.rs:524-534 | src/task_match.rs:39-50 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (11 corresponding lines) src/gitignore_policy.rs:680— src/gitignore_policy.rs:680-693 | src/ssh_keys.rs:814-824 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (11 corresponding lines) src/cli.rs:53— src/cli.rs:53-65 | src/processes.rs:493-503 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (11 corresponding lines) src/ai_everruns.rs:761— src/ai_everruns.rs:761-771 | src/tasks.rs:1108-1119 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (11 corresponding lines) src/install.rs:963— src/install.rs:963-974 | src/registry.rs:641-651 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (11 corresponding lines) src/agents.rs:980— src/agents.rs:980-991 | src/commit.rs:13759-13769 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (11 corresponding lines) src/ai_tasks.rs:802— src/ai_tasks.rs:802-814 | src/ssh_keys.rs:425-435 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (11 corresponding lines) scripts/ai-taskd-launchd.py:98— scripts/ai-taskd-launchd.py:98-109 | scripts/codex-skill-eval-launchd.py:139-149 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D30 · Dependency Vulnerabilities· Medium CVE · ×11
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
D4 · Code Duplication· Edited copy of a member (18 corresponding lines) · ×11
Edited copy of a member (18 corresponding lines) src/ai_tasks.rs:783— src/ai_tasks.rs:783-800 | src/tasks.rs:1121-1138 — These two members are one piece of code written twice and then edited apart: 18 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (18 corresponding lines) src/sync.rs:4898— src/sync.rs:4898-4915 | src/sync.rs:4988-5007 — These two members are one piece of code written twice and then edited apart: 18 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (18 corresponding lines) src/ai.rs:11833— src/ai.rs:11833-11850 | src/commit.rs:10245-10265 — These two members are one piece of code written twice and then edited apart: 18 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (18 corresponding lines) src/codex_memory.rs:1242— src/codex_memory.rs:1242-1260 | src/codex_memory.rs:1262-1279 — These two members are one piece of code written twice and then edited apart: 18 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (18 corresponding lines) src/features.rs:40— src/features.rs:40-57 | src/features.rs:67-84 — These two members are one piece of code written twice and then edited apart: 18 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (18 corresponding lines) src/env.rs:458— src/env.rs:458-475 | src/env.rs:477-494 — These two members are one piece of code written twice and then edited apart: 18 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (18 corresponding lines) src/sync_plan.rs:1201— src/sync_plan.rs:1201-1218 | src/updates.rs:1170-1190 — These two members are one piece of code written twice and then edited apart: 18 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (18 corresponding lines) src/tasks.rs:799— src/tasks.rs:799-819 | src/tasks.rs:850-867 — These two members are one piece of code written twice and then edited apart: 18 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (18 corresponding lines) src/commit.rs:10280— src/commit.rs:10280-10297 | src/failure.rs:684-706 — These two members are one piece of code written twice and then edited apart: 18 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (18 corresponding lines) src/external_cli.rs:479— src/external_cli.rs:479-496 | src/external_cli.rs:498-516 — These two members are one piece of code written twice and then edited apart: 18 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (18 corresponding lines) src/jj.rs:2286— src/jj.rs:2286-2303 | src/repos.rs:619-636 — These two members are one piece of code written twice and then edited apart: 18 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Duplicated block (15 lines × 2) src/changes.rs:708— src/changes.rs:708-722 | src/env.rs:1045-1059 — before extracting anything, compare `src/changes.rs` and `src/env.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 39 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/changes.rs:708` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (15 lines × 2) src/code.rs:879— src/code.rs:879-893 | src/ext.rs:224-238 — before extracting anything, compare `src/code.rs` and `src/ext.rs` as WHOLE FILES: this scan already matched 5 separate duplicated blocks between them, totalling at least 57 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/code.rs:879` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (15 lines × 2) src/commit.rs:8450— src/commit.rs:8450-8464 | src/commit.rs:8469-8483 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (15 lines × 2) src/commit.rs:10281— src/commit.rs:10281-10295 | src/failure.rs:685-699 — before extracting anything, compare `src/commit.rs` and `src/failure.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 58 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (15 lines × 2) src/daemon.rs:555— src/daemon.rs:555-569 | src/hub.rs:92-106 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/hub.rs:92` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (15 lines × 2) src/deploy_setup.rs:793— src/deploy_setup.rs:793-807 | src/env_setup.rs:701-715 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (15 lines × 2) src/env.rs:527— src/env.rs:527-541 | src/ssh_keys.rs:514-528 — before extracting anything, compare `src/env.rs` and `src/ssh_keys.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 70 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (15 lines × 2) src/env.rs:3506— src/env.rs:3506-3520 | src/env.rs:3535-3549 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/env.rs:3506` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (15 lines × 2) src/gh_release.rs:20— src/gh_release.rs:20-34 | src/publish.rs:113-127 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (15 lines × 2) src/info.rs:80— src/info.rs:80-94 | src/repo_capsule.rs:395-409 — before extracting anything, compare `src/info.rs` and `src/repo_capsule.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 49 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (15 lines × 2) src/tasks.rs:805— src/tasks.rs:805-819 | src/tasks.rs:853-867 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/tasks.rs:805` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D4 · Code Duplication· Edited copy of a member (13 corresponding lines) · ×10
Edited copy of a member (13 corresponding lines) src/sealer_crypto.rs:46— src/sealer_crypto.rs:46-58 | src/sealer_crypto.rs:65-77 — These two members are one piece of code written twice and then edited apart: 13 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (13 corresponding lines) src/deploy.rs:1758— src/deploy.rs:1758-1770 | src/deploy.rs:1773-1785 — These two members are one piece of code written twice and then edited apart: 13 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (13 corresponding lines) src/deploy.rs:311— src/deploy.rs:311-323 | src/deploy.rs:422-434 — These two members are one piece of code written twice and then edited apart: 13 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (13 corresponding lines) src/deps.rs:1521— src/deps.rs:1521-1533 | src/repos.rs:1861-1875 — These two members are one piece of code written twice and then edited apart: 13 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (13 corresponding lines) src/jazz_state.rs:105— src/jazz_state.rs:105-117 | src/jazz_state_stub.rs:25-37 — These two members are one piece of code written twice and then edited apart: 13 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (13 corresponding lines) src/codex_telemetry.rs:197— src/codex_telemetry.rs:197-213 | src/repo_capsule.rs:1016-1028 — These two members are one piece of code written twice and then edited apart: 13 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (13 corresponding lines) src/install.rs:923— src/install.rs:923-938 | src/registry.rs:653-665 — These two members are one piece of code written twice and then edited apart: 13 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (13 corresponding lines) src/bin/flow-workspace-bootstrap.rs:1244— src/bin/flow-workspace-bootstrap.rs:1244-1259 | src/bin/flow-workspace-bootstrap.rs:1261-1273 — These two members are one piece of code written twice and then edited apart: 13 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (13 corresponding lines) src/commit.rs:8524— src/commit.rs:8524-8541 | src/repo_capsule.rs:897-909 — These two members are one piece of code written twice and then edited apart: 13 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (13 corresponding lines) src/watchers.rs:62— src/watchers.rs:62-74 | src/watchers.rs:76-88 — These two members are one piece of code written twice and then edited apart: 13 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (10 corresponding lines) · ×10
Edited copy of a member (10 corresponding lines) src/sync_plan.rs:1713— src/sync_plan.rs:1713-1722 | src/updates.rs:1443-1452 — These two members are one piece of code written twice and then edited apart: 10 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (10 corresponding lines) src/ai_everruns.rs:819— src/ai_everruns.rs:819-828 | src/ai_everruns.rs:830-839 — These two members are one piece of code written twice and then edited apart: 10 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (10 corresponding lines) src/jazz_state.rs:119— src/jazz_state.rs:119-133 | src/traces.rs:364-373 — These two members are one piece of code written twice and then edited apart: 10 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (10 corresponding lines) src/deploy.rs:1249— src/deploy.rs:1249-1258 | src/deploy.rs:2698-2707 — These two members are one piece of code written twice and then edited apart: 10 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (10 corresponding lines) src/commits.rs:474— src/commits.rs:474-483 | src/commits.rs:538-547 — These two members are one piece of code written twice and then edited apart: 10 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (10 corresponding lines) src/sync.rs:381— src/sync.rs:381-390 | src/sync.rs:396-408 — These two members are one piece of code written twice and then edited apart: 10 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (10 corresponding lines) src/push_hook.rs:188— src/push_hook.rs:188-197 | src/ssh.rs:452-463 — These two members are one piece of code written twice and then edited apart: 10 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (10 corresponding lines) src/deploy_setup.rs:209— src/deploy_setup.rs:209-222 | src/env_setup.rs:185-194 — These two members are one piece of code written twice and then edited apart: 10 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (10 corresponding lines) scripts/codex_fork.py:83— scripts/codex_fork.py:83-92 | scripts/codex_j.py:94-105 — These two members are one piece of code written twice and then edited apart: 10 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (10 corresponding lines) scripts/bench-ai-runtime.py:16— scripts/bench-ai-runtime.py:16-26 | scripts/bench-cli-startup.py:40-49 — These two members are one piece of code written twice and then edited apart: 10 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Duplicated block (16 lines × 2) src/commit.rs:14367— src/commit.rs:14367-14382 | src/commit.rs:14479-14494 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:14367` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (16 lines × 2) src/commit.rs:14436— src/commit.rs:14436-14451 | src/commit.rs:14481-14496 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:14436` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/commit.rs:14435` calls `status`, `as_u16` and `src/commit.rs:14480` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (16 lines × 2) src/deps.rs:782— src/deps.rs:782-797 | src/deps.rs:803-818 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/deps.rs:782` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (16 lines × 2) src/git_guard.rs:344— src/git_guard.rs:344-359 | src/jj.rs:3572-3587 — before extracting anything, compare `src/git_guard.rs` and `src/jj.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 35 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (16 lines × 2) src/info.rs:123— src/info.rs:123-138 | src/repo_capsule.rs:935-950 — before extracting anything, compare `src/info.rs` and `src/repo_capsule.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 49 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (16 lines × 2) src/log_server.rs:540— src/log_server.rs:540-555 | src/server.rs:438-453 — before extracting anything, compare `src/log_server.rs` and `src/server.rs` as WHOLE FILES: this scan already matched 18 separate duplicated blocks between them, totalling at least 276 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (16 lines × 2) src/todo.rs:242— src/todo.rs:242-257 | src/todo.rs:260-275 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/todo.rs:242` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (16 lines × 2) src/ai_tasks.rs:785— src/ai_tasks.rs:785-800 | src/tasks.rs:1123-1138 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai_tasks.rs:785` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (16 lines × 2) src/deploy_setup.rs:53— src/deploy_setup.rs:53-68 | src/env_setup.rs:49-64 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy_setup.rs:53` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (16 lines × 2) src/log_server.rs:424— src/log_server.rs:424-439 | src/server.rs:324-339 — before extracting anything, compare `src/log_server.rs` and `src/server.rs` as WHOLE FILES: this scan already matched 18 separate duplicated blocks between them, totalling at least 276 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/log_server.rs:424` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 3) src/ai.rs:7357— src/ai.rs:7357-7364 | src/ai.rs:9885-9892 | src/ai.rs:9941-9948 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:7357` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note first that the copies are not typed on the same thing: the declarations holding them bind `session_file` to `&Path` in one and `&PathBuf` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (8 lines × 3) src/commit.rs:15565— src/commit.rs:15565-15572 | src/commit.rs:15674-15681 | src/commit.rs:15733-15740 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:15565` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 3) src/env.rs:2297— src/env.rs:2297-2304 | src/env.rs:2353-2360 | src/env.rs:3497-3504 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/env.rs:2297` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 3) src/ext.rs:417— src/ext.rs:417-424 | src/services.rs:513-520 | src/setup.rs:2948-2955 — before extracting anything, compare `src/services.rs` and `src/setup.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 70 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/ext.rs:417` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 3) src/failure.rs:632— src/failure.rs:632-639 | src/jj.rs:1741-1748 | src/jj.rs:2398-2405 — there are 3 copies across 2 file(s) — more copies than files, so at least one file holds the block twice. Extract it once into a single shared function every call site can reach and call it from all 3 sites; resolving a subset leaves the remainder to drift apart. Read the line range as the matched WINDOW rather than a finished unit: at `src/failure.rs:632` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 3) src/server.rs:824— src/server.rs:824-831 | src/server.rs:867-874 | src/server.rs:912-919 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/server.rs:824` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (8 lines × 3) src/trace.rs:73— src/trace.rs:73-80 | src/trace.rs:158-165 | src/trace.rs:260-267 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/trace.rs:73` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (8 lines × 3) src/push_policy.rs:267— src/push_policy.rs:267-274 | src/skills.rs:758-765 | src/tasks.rs:1586-1593 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from all 3 call sites, so a change lands once.
Duplicated block (8 lines × 3) src/ai_project_manifest.rs:191— src/ai_project_manifest.rs:191-198 | src/config.rs:2454-2461 | src/project_snapshot.rs:216-223 — before extracting anything, compare `src/ai_project_manifest.rs` and `src/project_snapshot.rs` as WHOLE FILES: this scan already matched 5 separate duplicated blocks between them, totalling at least 41 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (8 lines × 3) src/commit.rs:12281— src/commit.rs:12281-12288 | src/commit.rs:12693-12700 | src/commit.rs:13522-13529 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:12281` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D4 · Code Duplication· Edited copy of a member (19 corresponding lines) · ×9
Edited copy of a member (19 corresponding lines) src/projects.rs:55— src/projects.rs:55-74 | src/projects.rs:77-95 — These two members are one piece of code written twice and then edited apart: 19 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (19 corresponding lines) src/jd.rs:489— src/jd.rs:489-508 | src/supervisor.rs:658-676 — These two members are one piece of code written twice and then edited apart: 19 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (19 corresponding lines) src/updates.rs:804— src/updates.rs:804-823 | src/updates.rs:878-896 — These two members are one piece of code written twice and then edited apart: 19 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (19 corresponding lines) src/commit.rs:4740— src/commit.rs:4740-4758 | src/commit.rs:4768-4791 — These two members are one piece of code written twice and then edited apart: 19 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (19 corresponding lines) src/changes.rs:704— src/changes.rs:704-722 | src/env.rs:1041-1059 — These two members are one piece of code written twice and then edited apart: 19 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (19 corresponding lines) src/repos.rs:1482— src/repos.rs:1482-1500 | src/sync.rs:4191-4213 — These two members are one piece of code written twice and then edited apart: 19 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (19 corresponding lines) src/commit.rs:2607— src/commit.rs:2607-2625 | src/commit.rs:2671-2701 — These two members are one piece of code written twice and then edited apart: 19 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (19 corresponding lines) src/indexer.rs:45— src/indexer.rs:45-69 | src/indexer.rs:71-89 — These two members are one piece of code written twice and then edited apart: 19 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (19 corresponding lines) src/jd.rs:317— src/jd.rs:317-335 | src/jd.rs:364-383 — These two members are one piece of code written twice and then edited apart: 19 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Duplicated block (19 lines × 2) src/ai.rs:1651— src/ai.rs:1651-1669 | src/ai.rs:16254-16272 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:1651` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/ai.rs:16253` calls `to_string_lossy`, `replace` and `src/ai.rs:1649` does not — after which the two agree again for 4 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (19 lines × 2) src/commit.rs:2062— src/commit.rs:2062-2080 | src/commit.rs:2250-2268 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (19 lines × 2) src/commit.rs:12650— src/commit.rs:12650-12668 | src/commit.rs:12729-12747 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:12650` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (19 lines × 2) src/log_server.rs:378— src/log_server.rs:378-396 | src/server.rs:278-296 — before extracting anything, compare `src/log_server.rs` and `src/server.rs` as WHOLE FILES: this scan already matched 18 separate duplicated blocks between them, totalling at least 276 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/log_server.rs:378` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (19 lines × 2) src/log_server.rs:463— src/log_server.rs:463-481 | src/server.rs:363-381 — before extracting anything, compare `src/log_server.rs` and `src/server.rs` as WHOLE FILES: this scan already matched 18 separate duplicated blocks between them, totalling at least 276 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (19 lines × 2) src/log_server.rs:616— src/log_server.rs:616-634 | src/server.rs:535-553 — before extracting anything, compare `src/log_server.rs` and `src/server.rs` as WHOLE FILES: this scan already matched 18 separate duplicated blocks between them, totalling at least 276 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (19 lines × 2) src/main.rs:368— src/main.rs:368-386 | src/main.rs:391-409 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (19 lines × 2) src/commit.rs:15295— src/commit.rs:15295-15313 | src/commit.rs:15410-15428 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:15295` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (19 lines × 2) src/skills.rs:336— src/skills.rs:336-354 | src/tools.rs:77-95 — before extracting anything, compare `src/skills.rs` and `src/tools.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 37 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/skills.rs:336` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (14 lines × 2) src/ai.rs:1627— src/ai.rs:1627-1640 | src/ai.rs:16232-16245 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/ai.rs:1642` calls `to_string_lossy`, `to_string`, `path_to_project_name` and `src/ai.rs:16247` does not — after which the two agree again for 3 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (14 lines × 2) src/ai_tasks.rs:755— src/ai_tasks.rs:755-768 | src/recipe.rs:461-474 — before extracting anything, compare `src/ai_tasks.rs` and `src/recipe.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 62 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (14 lines × 2) src/commit.rs:252— src/commit.rs:252-265 | src/commit.rs:549-562 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:252` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (14 lines × 2) src/commit.rs:879— src/commit.rs:879-892 | src/commit.rs:1132-1145 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:879` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (14 lines × 2) src/commit.rs:8336— src/commit.rs:8336-8349 | src/commit.rs:8352-8365 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (14 lines × 2) src/commit.rs:8509— src/commit.rs:8509-8522 | src/sync.rs:2635-2648 — before extracting anything, compare `src/commit.rs` and `src/sync.rs` as WHOLE FILES: this scan already matched 13 separate duplicated blocks between them, totalling at least 152 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (14 lines × 2) src/config.rs:2817— src/config.rs:2817-2830 | src/config.rs:2852-2865 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/config.rs:2817` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (14 lines × 2) src/deploy.rs:2234— src/deploy.rs:2234-2247 | src/deploy.rs:2422-2435 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy.rs:2234` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (14 lines × 2) src/commit.rs:7797— src/commit.rs:7797-7810 | src/commit.rs:9320-9333 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:7797` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
TodoComment src/cli.rs:2142— /// Todo id (short prefix or full). — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
TodoComment src/cli.rs:2147— /// Todo id (short prefix or full). — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
TodoComment src/cli.rs:2152— /// Todo id to fix. If omitted with --all, fixes all open review todos. — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
TodoComment src/cli.rs:3792— /// Todo id (full or prefix). — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
TodoComment src/cli.rs:3797— /// Todo id (full or prefix). — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
TodoComment src/cli.rs:3811— /// Todo id (full or prefix). — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
TodoComment src/commit.rs:4126— // TODO: track actual review time — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
TodoComment src/tools.rs:210— // TODO: Implement tool logic — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
D4 · Code Duplication· Edited copy of a member (6 corresponding lines) · ×8
Edited copy of a member (6 corresponding lines) src/sync.rs:2688— src/sync.rs:2688-2694 | src/commit.rs:1861-1866 — These two members are one piece of code written twice and then edited apart: 6 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (6 corresponding lines) src/ai_everruns.rs:754— src/ai_everruns.rs:754-759 | src/env.rs:765-770 — These two members are one piece of code written twice and then edited apart: 6 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (6 corresponding lines) src/codex_telemetry.rs:124— src/codex_telemetry.rs:124-129 | src/projects.rs:171-177 — These two members are one piece of code written twice and then edited apart: 6 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (6 corresponding lines) src/codex_runtime.rs:607— src/codex_runtime.rs:607-612 | src/doctor.rs:277-282 — These two members are one piece of code written twice and then edited apart: 6 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (6 corresponding lines) src/fish_install.rs:169— src/fish_install.rs:169-174 | src/install.rs:976-981 — These two members are one piece of code written twice and then edited apart: 6 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (6 corresponding lines) src/ai.rs:14514— src/ai.rs:14514-14519 | src/ai_everruns.rs:547-553 — These two members are one piece of code written twice and then edited apart: 6 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (6 corresponding lines) src/codex_runtime.rs:158— src/codex_runtime.rs:158-163 | src/codex_skill_eval.rs:117-122 — These two members are one piece of code written twice and then edited apart: 6 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (6 corresponding lines) src/failure.rs:722— src/failure.rs:722-727 | src/usage.rs:754-759 — These two members are one piece of code written twice and then edited apart: 6 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Duplicated block (24 lines × 2) src/ai.rs:1933— src/ai.rs:1933-1956 | src/ai.rs:1983-2006 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:1933` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (24 lines × 2) src/ai.rs:2645— src/ai.rs:2645-2668 | src/codex_text.rs:57-80 — before extracting anything, compare `src/ai.rs` and `src/codex_text.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 48 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (24 lines × 2) src/ai.rs:14617— src/ai.rs:14617-14640 | src/ai.rs:14693-14716 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:14617` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (24 lines × 2) src/ai_tasks.rs:729— src/ai_tasks.rs:729-752 | src/recipe.rs:403-426 — before extracting anything, compare `src/ai_tasks.rs` and `src/recipe.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 62 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai_tasks.rs:729` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (24 lines × 2) src/commit.rs:2177— src/commit.rs:2177-2200 | src/commit.rs:2345-2368 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:2177` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (24 lines × 2) src/commit.rs:14118— src/commit.rs:14118-14141 | src/skills.rs:676-699 — before extracting anything, compare `src/commit.rs` and `src/skills.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 58 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:14118` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note first that the copies are not typed on the same thing: the declarations holding them bind `repo_root` to `&std::path::Path` in one and `&Path` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (24 lines × 2) src/deploy_setup.rs:532— src/deploy_setup.rs:532-555 | src/env_setup.rs:466-489 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy_setup.rs:532` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/deploy_setup.rs:556` calls `relative_display`, `worker_path` and `src/env_setup.rs:490` does not — after which the two agree again for 4 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (24 lines × 2) src/deploy_setup.rs:891— src/deploy_setup.rs:891-914 | src/env_setup.rs:790-813 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
D4 · Code Duplication· Members sharing a duplicated core (4 members, 50+ identical tokens) · ×7
Members sharing a duplicated core (4 members, 50+ identical tokens) crates/flow_commit_scan/src/lib.rs:198— crates/flow_commit_scan/src/lib.rs:198-314 | src/commit.rs:248-296 | src/commit.rs:545-581 | src/commit.rs:6615-6638 — These 4 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 4 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 4 times.
Members sharing a duplicated core (4 members, 50+ identical tokens) src/ai.rs:4563— src/ai.rs:4563-4581 | src/ai.rs:12744-12759 | src/ai_project_manifest.rs:219-235 | src/codex_session_docs.rs:1757-1773 — These 4 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 4 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 4 times.
Members sharing a duplicated core (4 members, 50+ identical tokens) src/commit.rs:2938— src/commit.rs:2938-2945 | src/fish_install.rs:145-155 | src/fish_install.rs:157-167 | src/install.rs:951-961 — These 4 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 4 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 4 times.
Members sharing a duplicated core (4 members, 50+ identical tokens) src/deploy.rs:616— src/deploy.rs:616-667 | src/fish_install.rs:12-117 | src/push_hook.rs:70-108 | src/setup.rs:1222-1246 — These 4 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 4 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 4 times.
Members sharing a duplicated core (4 members, 50+ identical tokens) src/deploy_setup.rs:916— src/deploy_setup.rs:916-967 | src/deploy_setup.rs:969-1018 | src/discover.rs:115-257 | src/env_setup.rs:829-878 — These 4 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 4 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 4 times.
Members sharing a duplicated core (4 members, 50+ identical tokens) src/failure.rs:293— src/failure.rs:293-325 | src/trace.rs:72-87 | src/trace.rs:154-183 | src/trace.rs:256-288 — These 4 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 4 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 4 times.
Members sharing a duplicated core (4 members, 50+ identical tokens) src/sync_plan.rs:982— src/sync_plan.rs:982-1144 | src/sync_plan.rs:1232-1407 | src/updates.rs:1027-1131 | src/updates.rs:1204-1322 — These 4 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 4 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 4 times.
D4 · Code Duplication· Edited copy of a member (7 corresponding lines) · ×7
Edited copy of a member (7 corresponding lines) src/repo_capsule.rs:1030— src/repo_capsule.rs:1030-1036 | src/repo_capsule.rs:1045-1051 — These two members are one piece of code written twice and then edited apart: 7 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (7 corresponding lines) src/changes.rs:562— src/changes.rs:562-568 | src/usage.rs:584-592 — These two members are one piece of code written twice and then edited apart: 7 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (7 corresponding lines) src/explain_commits.rs:90— src/explain_commits.rs:90-98 | src/codex_memory.rs:527-533 — These two members are one piece of code written twice and then edited apart: 7 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (7 corresponding lines) src/commit.rs:735— src/commit.rs:735-741 | src/registry.rs:290-297 — These two members are one piece of code written twice and then edited apart: 7 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (7 corresponding lines) src/commit.rs:727— src/commit.rs:727-733 | src/skills.rs:742-749 — These two members are one piece of code written twice and then edited apart: 7 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (7 corresponding lines) src/ai.rs:12904— src/ai.rs:12904-12911 | src/commit.rs:10062-10068 — These two members are one piece of code written twice and then edited apart: 7 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (7 corresponding lines) src/daemon.rs:630— src/daemon.rs:630-636 | src/log_server.rs:262-268 — These two members are one piece of code written twice and then edited apart: 7 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (5 corresponding lines) · ×7
Edited copy of a member (5 corresponding lines) src/flow_config.rs:926— src/flow_config.rs:926-931 | src/pr_preview.rs:1664-1668 — These two members are one piece of code written twice and then edited apart: 5 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (5 corresponding lines) src/daemon.rs:316— src/daemon.rs:316-321 | src/sync_plan.rs:1545-1549 — These two members are one piece of code written twice and then edited apart: 5 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (5 corresponding lines) src/ask.rs:52— src/ask.rs:52-56 | src/task_match.rs:124-128 — These two members are one piece of code written twice and then edited apart: 5 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (5 corresponding lines) src/fish_trace.rs:29— src/fish_trace.rs:29-33 | src/traces.rs:316-320 — These two members are one piece of code written twice and then edited apart: 5 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (5 corresponding lines) src/external_cli.rs:473— src/external_cli.rs:473-477 | src/sync_plan.rs:1551-1555 — These two members are one piece of code written twice and then edited apart: 5 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (5 corresponding lines) crates/seq_everruns_bridge/src/maple.rs:497— crates/seq_everruns_bridge/src/maple.rs:497-501 | src/rl_signals.rs:239-245 — These two members are one piece of code written twice and then edited apart: 5 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (5 corresponding lines) src/hive.rs:149— src/hive.rs:149-153 | src/ssh_keys.rs:493-497 — These two members are one piece of code written twice and then edited apart: 5 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Duplicated block (11 lines × 3) src/ai.rs:3431— src/ai.rs:3431-3441 | src/ai.rs:16034-16044 | src/code.rs:1511-1521 — before extracting anything, compare `src/ai.rs` and `src/code.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 44 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:3431` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (11 lines × 3) src/archive.rs:127— src/archive.rs:127-137 | src/code.rs:862-872 | src/ext.rs:207-217 — before extracting anything, compare `src/archive.rs` and `src/code.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 37 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/archive.rs:127` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (11 lines × 3) src/archive.rs:140— src/archive.rs:140-150 | src/code.rs:875-885 | src/ext.rs:220-230 — before extracting anything, compare `src/archive.rs` and `src/code.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 37 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/archive.rs:140` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (11 lines × 3) src/env.rs:1520— src/env.rs:1520-1530 | src/env.rs:1559-1569 | src/env.rs:3776-3786 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/env.rs:1520` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (11 lines × 3) src/ext.rs:369— src/ext.rs:369-379 | src/jj.rs:3367-3377 | src/sync.rs:4577-4587 — before extracting anything, compare `src/ext.rs` and `src/jj.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 51 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (11 lines × 3) src/sync.rs:1014— src/sync.rs:1014-1024 | src/sync.rs:1115-1125 | src/sync.rs:5862-5872 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited.
Duplicated block (11 lines × 3) src/code.rs:373— src/code.rs:373-383 | src/palette.rs:97-107 | src/repos.rs:128-138 — before extracting anything, compare `src/code.rs` and `src/palette.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 36 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/code.rs:373` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Outbound HTTP without resilience src/otp.rs:84— `Client::builder()` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout.
Outbound HTTP without resilience src/proxy/server.rs:101— `reqwest::Client::builder(` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout.
Outbound HTTP without resilience src/secrets.rs:122— `Client::builder()` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout.
Outbound HTTP without resilience src/servers_tui.rs:30— `reqwest::blocking::Client::new(` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout.
Outbound HTTP without resilience src/skills.rs:626— `reqwest::blocking::Client::new(` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout.
Outbound HTTP without resilience src/skills.rs:1016— `reqwest::blocking::get(` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout.
Outbound HTTP without resilience src/skills.rs:1070— `reqwest::blocking::get(` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout.
D30 · Dependency Vulnerabilities· Medium advisory (unsound) · ×6
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
D4 · Code Duplication· Members sharing a duplicated core (5 members, 50+ identical tokens) · ×6
Members sharing a duplicated core (5 members, 50+ identical tokens) src/ai.rs:2480— src/ai.rs:2480-2510 | src/ai.rs:7298-7342 | src/ai.rs:7348-7383 | src/ai.rs:9883-9916 | src/ai.rs:9930-9973 — These 5 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 5 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 5 times.
Members sharing a duplicated core (5 members, 50+ identical tokens) src/ai.rs:3427— src/ai.rs:3427-3448 | src/ai.rs:16023-16054 | src/code.rs:407-453 | src/code.rs:1508-1528 | src/web.rs:281-325 — These 5 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 5 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 5 times.
Members sharing a duplicated core (5 members, 50+ identical tokens) src/commit.rs:1984— src/commit.rs:1984-2200 | src/commit.rs:2209-2368 | src/commit.rs:3909-4678 | src/commit.rs:7717-7919 | src/commit.rs:8959-9532 — These 5 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 5 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 5 times.
Members sharing a duplicated core (5 members, 50+ identical tokens) src/commit.rs:8449— src/commit.rs:8449-8466 | src/commit.rs:8468-8485 | src/commit.rs:12226-12296 | src/commit.rs:12649-12725 | src/commit.rs:13490-13529 — These 5 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 5 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 5 times.
Members sharing a duplicated core (5 members, 50+ identical tokens) src/ext.rs:410— src/ext.rs:410-424 | src/publish.rs:897-916 | src/publish.rs:918-934 | src/services.rs:506-520 | src/setup.rs:2941-2955 — These 5 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 5 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 5 times.
Members sharing a duplicated core (5 members, 50+ identical tokens) src/failure.rs:572— src/failure.rs:572-590 | src/failure.rs:625-639 | src/jj.rs:1737-1748 | src/jj.rs:2394-2405 | src/vcs.rs:52-67 — These 5 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 5 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 5 times.
D4 · Code Duplication· Edited copy of a member (20 corresponding lines) · ×6
Edited copy of a member (20 corresponding lines) src/code.rs:874— src/code.rs:874-893 | src/ext.rs:219-238 — These two members are one piece of code written twice and then edited apart: 20 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (20 corresponding lines) src/sync.rs:4554— src/sync.rs:4554-4574 | src/sync.rs:5494-5513 — These two members are one piece of code written twice and then edited apart: 20 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (20 corresponding lines) src/json_parse.rs:5— src/json_parse.rs:5-25 | src/json_parse.rs:28-47 — These two members are one piece of code written twice and then edited apart: 20 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (20 corresponding lines) src/commit.rs:666— src/commit.rs:666-685 | src/commit.rs:691-711 — These two members are one piece of code written twice and then edited apart: 20 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (20 corresponding lines) src/deploy.rs:1835— src/deploy.rs:1835-1855 | src/latest.rs:27-46 — These two members are one piece of code written twice and then edited apart: 20 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (20 corresponding lines) src/jd.rs:388— src/jd.rs:388-407 | src/jd.rs:432-451 — These two members are one piece of code written twice and then edited apart: 20 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (16 corresponding lines) · ×6
Edited copy of a member (16 corresponding lines) src/commits.rs:116— src/commits.rs:116-131 | src/commits.rs:409-425 — These two members are one piece of code written twice and then edited apart: 16 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (16 corresponding lines) src/commit.rs:2627— src/commit.rs:2627-2647 | src/sync_plan.rs:368-383 — These two members are one piece of code written twice and then edited apart: 16 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (16 corresponding lines) src/flow_config.rs:987— src/flow_config.rs:987-1002 | src/flow_config.rs:1017-1042 — These two members are one piece of code written twice and then edited apart: 16 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (16 corresponding lines) src/daemon.rs:554— src/daemon.rs:554-569 | src/hub.rs:90-106 — These two members are one piece of code written twice and then edited apart: 16 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (16 corresponding lines) src/ssh_keys.rs:382— src/ssh_keys.rs:382-397 | src/ssh_keys.rs:399-414 — These two members are one piece of code written twice and then edited apart: 16 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (16 corresponding lines) src/ssh.rs:158— src/ssh.rs:158-173 | src/ssh.rs:175-190 — These two members are one piece of code written twice and then edited apart: 16 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (9 corresponding lines) · ×6
Edited copy of a member (9 corresponding lines) src/commit.rs:14599— src/commit.rs:14599-14617 | src/sync.rs:5821-5829 — These two members are one piece of code written twice and then edited apart: 9 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (9 corresponding lines) src/config.rs:2486— src/config.rs:2486-2494 | src/project_snapshot.rs:250-258 — These two members are one piece of code written twice and then edited apart: 9 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (9 corresponding lines) src/explain_commits.rs:189— src/explain_commits.rs:189-197 | src/explain_commits.rs:199-207 — These two members are one piece of code written twice and then edited apart: 9 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (9 corresponding lines) src/daemon.rs:619— src/daemon.rs:619-628 | src/supervisor.rs:1282-1290 — These two members are one piece of code written twice and then edited apart: 9 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (9 corresponding lines) src/env.rs:889— src/env.rs:889-901 | src/ssh_keys.rs:659-667 — These two members are one piece of code written twice and then edited apart: 9 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (9 corresponding lines) src/env.rs:1078— src/env.rs:1078-1090 | src/gitignore_policy.rs:711-719 — These two members are one piece of code written twice and then edited apart: 9 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (8 corresponding lines) · ×6
Edited copy of a member (8 corresponding lines) src/daemon.rs:608— src/daemon.rs:608-617 | src/supervisor.rs:1292-1299 — These two members are one piece of code written twice and then edited apart: 8 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (8 corresponding lines) src/ai.rs:7690— src/ai.rs:7690-7697 | src/ai.rs:7699-7710 — These two members are one piece of code written twice and then edited apart: 8 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (8 corresponding lines) src/ai.rs:14558— src/ai.rs:14558-14565 | src/ai.rs:14567-14574 — These two members are one piece of code written twice and then edited apart: 8 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (8 corresponding lines) src/codex_session_docs.rs:1297— src/codex_session_docs.rs:1297-1308 | src/codex_session_docs.rs:1794-1801 — These two members are one piece of code written twice and then edited apart: 8 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (8 corresponding lines) src/jj.rs:184— src/jj.rs:184-193 | src/project_snapshot.rs:292-299 — These two members are one piece of code written twice and then edited apart: 8 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (8 corresponding lines) src/jj.rs:2056— src/jj.rs:2056-2063 | src/sync.rs:4743-4750 — These two members are one piece of code written twice and then edited apart: 8 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Duplicated block (18 lines × 2) src/code.rs:373— src/code.rs:373-390 | src/repos.rs:128-145 — before extracting anything, compare `src/code.rs` and `src/repos.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 54 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/code.rs:373` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (18 lines × 2) src/code.rs:1230— src/code.rs:1230-1247 | src/code.rs:1266-1283 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/code.rs:1230` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (18 lines × 2) src/commit.rs:7837— src/commit.rs:7837-7854 | src/commit.rs:9360-9377 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:7837` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (18 lines × 2) src/explain_commits.rs:649— src/explain_commits.rs:649-666 | src/explain_commits.rs:726-743 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/explain_commits.rs:649` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (18 lines × 2) src/log_server.rs:401— src/log_server.rs:401-418 | src/server.rs:301-318 — before extracting anything, compare `src/log_server.rs` and `src/server.rs` as WHOLE FILES: this scan already matched 18 separate duplicated blocks between them, totalling at least 276 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/log_server.rs:401` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (18 lines × 2) src/bin/flow-workspace-bootstrap.rs:1497— src/bin/flow-workspace-bootstrap.rs:1497-1514 | src/jj.rs:2320-2337 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (17 lines × 2) src/commit.rs:2156— src/commit.rs:2156-2172 | src/commit.rs:2326-2342 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:2156` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (17 lines × 2) src/commit.rs:6480— src/commit.rs:6480-6496 | src/commit.rs:12789-12805 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (17 lines × 2) src/deploy_setup.rs:184— src/deploy_setup.rs:184-200 | src/env_setup.rs:167-183 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy_setup.rs:184` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (17 lines × 2) src/deps.rs:483— src/deps.rs:483-499 | src/fix.rs:174-190 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/deps.rs:483` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (17 lines × 2) src/hive.rs:317— src/hive.rs:317-333 | src/hive.rs:343-359 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/hive.rs:317` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/hive.rs:316` calls `arg` and `src/hive.rs:342` does not — after which the two agree again for 4 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (17 lines × 2) src/watchers.rs:103— src/watchers.rs:103-119 | src/watchers.rs:179-195 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (6 lines × 3) src/ai.rs:1539— src/ai.rs:1539-1544 | src/ai.rs:1746-1751 | src/ai.rs:15939-15944 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:1539` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (6 lines × 3) src/branches.rs:366— src/branches.rs:366-371 | src/ext.rs:401-406 | src/repos.rs:1516-1521 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from all 3 call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/branches.rs:366` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (6 lines × 3) src/env.rs:3398— src/env.rs:3398-3403 | src/env.rs:3502-3507 | src/env.rs:3805-3810 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/env.rs:3398` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (6 lines × 3) src/deploy.rs:1313— src/deploy.rs:1313-1318 | src/env.rs:1365-1370 | src/services.rs:225-230 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from all 3 call sites, so a change lands once.
Duplicated block (6 lines × 3) src/upstream.rs:289— src/upstream.rs:289-296 | src/upstream.rs:403-408 | src/upstream.rs:452-459 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/upstream.rs:289` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (6 lines × 3) src/ai.rs:9809— src/ai.rs:9809-9814 | src/ai.rs:9826-9832 | src/codex_skill_eval.rs:321-327 — there are 3 copies across 2 file(s) — more copies than files, so at least one file holds the block twice. Extract it once into a single shared function every call site can reach and call it from all 3 sites; resolving a subset leaves the remainder to drift apart. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:9809` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/codex_skill_eval.rs:329` calls `mirror_skill_outcome_event` and `src/ai.rs:9816` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (5 lines × 3) src/ai_project_manifest.rs:140— src/ai_project_manifest.rs:140-144 | src/config.rs:2502-2506 | src/project_snapshot.rs:266-270 — before extracting anything, compare `src/ai_project_manifest.rs` and `src/project_snapshot.rs` as WHOLE FILES: this scan already matched 5 separate duplicated blocks between them, totalling at least 41 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai_project_manifest.rs:140` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (5 lines × 3) src/ai_tasks.rs:784— src/ai_tasks.rs:784-788 | src/commit.rs:8777-8781 | src/tasks.rs:1122-1126 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from all 3 call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai_tasks.rs:784` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (5 lines × 3) src/commit.rs:9620— src/commit.rs:9620-9624 | src/commit.rs:9909-9913 | src/commit.rs:11726-11730 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:9620` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (5 lines × 3) src/deploy.rs:1690— src/deploy.rs:1690-1695 | src/deploy.rs:1759-1763 | src/deploy.rs:1774-1778 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited.
Duplicated block (5 lines × 3) src/ai_project_manifest.rs:180— src/ai_project_manifest.rs:180-184 | src/config.rs:2474-2479 | src/project_snapshot.rs:238-243 — before extracting anything, compare `src/ai_project_manifest.rs` and `src/project_snapshot.rs` as WHOLE FILES: this scan already matched 5 separate duplicated blocks between them, totalling at least 41 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai_project_manifest.rs:180` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately. Note first that the copies are not typed on the same thing: the declarations holding them bind `cache` to `&ConfigCacheEntry` in one and `&SnapshotCacheEntry` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (5 lines × 3) src/sync.rs:477— src/sync.rs:477-481 | src/sync_plan.rs:963-967 | src/updates.rs:961-965 — before extracting anything, compare `src/sync_plan.rs` and `src/updates.rs` as WHOLE FILES: this scan already matched 15 separate duplicated blocks between them, totalling at least 231 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/sync.rs:477` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Weak hash algorithm src/commit.rs:10011— MD5/SHA1 is computed here, and both are collision-broken. If this digest protects anything — a signature, an integrity or tamper check, a credential, or any value an attacker can influence — that is a real weakness: use SHA-256+ (`sha2::Sha256::digest(…)`) for content integrity, or a KDF (bcrypt/Argon2/scrypt) for password storage. If it only derives a non-security identifier (a cache key, an avatar URL, an ETag), collision resistance carries no security consequence here; make that intent explicit instead — a non-cryptographic hash such as xxhash or murmurhash says it in code — since the algorithm alone cannot distinguish the two uses. Where a protocol this code does not own fixes the digest (a k-anonymity range query, a legacy signature format), the protocol decides; say so beside the call.
Weak hash algorithm src/commit.rs:13628— MD5/SHA1 is computed here, and both are collision-broken. If this digest protects anything — a signature, an integrity or tamper check, a credential, or any value an attacker can influence — that is a real weakness: use SHA-256+ (`sha2::Sha256::digest(…)`) for content integrity, or a KDF (bcrypt/Argon2/scrypt) for password storage. If it only derives a non-security identifier (a cache key, an avatar URL, an ETag), collision resistance carries no security consequence here; make that intent explicit instead — a non-cryptographic hash such as xxhash or murmurhash says it in code — since the algorithm alone cannot distinguish the two uses. Where a protocol this code does not own fixes the digest (a k-anonymity range query, a legacy signature format), the protocol decides; say so beside the call.
Weak hash algorithm src/commit.rs:13641— MD5/SHA1 is computed here, and both are collision-broken. If this digest protects anything — a signature, an integrity or tamper check, a credential, or any value an attacker can influence — that is a real weakness: use SHA-256+ (`sha2::Sha256::digest(…)`) for content integrity, or a KDF (bcrypt/Argon2/scrypt) for password storage. If it only derives a non-security identifier (a cache key, an avatar URL, an ETag), collision resistance carries no security consequence here; make that intent explicit instead — a non-cryptographic hash such as xxhash or murmurhash says it in code — since the algorithm alone cannot distinguish the two uses. Where a protocol this code does not own fixes the digest (a k-anonymity range query, a legacy signature format), the protocol decides; say so beside the call.
Weak hash algorithm src/pr_preview.rs:951— MD5/SHA1 is computed here, and both are collision-broken. If this digest protects anything — a signature, an integrity or tamper check, a credential, or any value an attacker can influence — that is a real weakness: use SHA-256+ (`sha2::Sha256::digest(…)`) for content integrity, or a KDF (bcrypt/Argon2/scrypt) for password storage. If it only derives a non-security identifier (a cache key, an avatar URL, an ETag), collision resistance carries no security consequence here; make that intent explicit instead — a non-cryptographic hash such as xxhash or murmurhash says it in code — since the algorithm alone cannot distinguish the two uses. Where a protocol this code does not own fixes the digest (a k-anonymity range query, a legacy signature format), the protocol decides; say so beside the call.
Weak hash algorithm src/pr_preview.rs:1634— MD5/SHA1 is computed here, and both are collision-broken. If this digest protects anything — a signature, an integrity or tamper check, a credential, or any value an attacker can influence — that is a real weakness: use SHA-256+ (`sha2::Sha256::digest(…)`) for content integrity, or a KDF (bcrypt/Argon2/scrypt) for password storage. If it only derives a non-security identifier (a cache key, an avatar URL, an ETag), collision resistance carries no security consequence here; make that intent explicit instead — a non-cryptographic hash such as xxhash or murmurhash says it in code — since the algorithm alone cannot distinguish the two uses. Where a protocol this code does not own fixes the digest (a k-anonymity range query, a legacy signature format), the protocol decides; say so beside the call.
Weak hash algorithm src/todo.rs:307— MD5/SHA1 is computed here, and both are collision-broken. If this digest protects anything — a signature, an integrity or tamper check, a credential, or any value an attacker can influence — that is a real weakness: use SHA-256+ (`sha2::Sha256::digest(…)`) for content integrity, or a KDF (bcrypt/Argon2/scrypt) for password storage. If it only derives a non-security identifier (a cache key, an avatar URL, an ETag), collision resistance carries no security consequence here; make that intent explicit instead — a non-cryptographic hash such as xxhash or murmurhash says it in code — since the algorithm alone cannot distinguish the two uses. Where a protocol this code does not own fixes the digest (a k-anonymity range query, a legacy signature format), the protocol decides; say so beside the call.
D4 · Code Duplication· Edited copies of one member (3 members, 25+ corresponding lines) · ×5
Edited copies of one member (3 members, 25+ corresponding lines) src/archive.rs:110— src/archive.rs:110-137 | src/code.rs:848-872 | src/ext.rs:193-217 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 25 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
Edited copies of one member (3 members, 25+ corresponding lines) src/log_server.rs:772— src/log_server.rs:772-796 | src/log_server.rs:875-899 | src/log_server.rs:904-933 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 25 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
Edited copies of one member (3 members, 25+ corresponding lines) src/ai.rs:1185— src/ai.rs:1185-1209 | src/ai.rs:1224-1255 | src/ai.rs:1278-1306 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 25 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
Edited copies of one member (3 members, 25+ corresponding lines) src/commit.rs:743— src/commit.rs:743-770 | src/commit.rs:772-796 | src/commit.rs:798-822 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 25 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
Edited copies of one member (3 members, 25+ corresponding lines) src/codex_memory.rs:667— src/codex_memory.rs:667-691 | src/codex_runtime.rs:319-346 | src/codex_skill_eval.rs:234-262 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 25 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication· Edited copy of a member (24 corresponding lines) · ×5
Edited copy of a member (24 corresponding lines) src/home.rs:722— src/home.rs:722-745 | src/home.rs:757-780 — These two members are one piece of code written twice and then edited apart: 24 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (24 corresponding lines) src/ai_taskd.rs:770— src/ai_taskd.rs:770-793 | src/ai_taskd.rs:800-823 — These two members are one piece of code written twice and then edited apart: 24 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (24 corresponding lines) src/hive.rs:308— src/hive.rs:308-333 | src/hive.rs:336-359 — These two members are one piece of code written twice and then edited apart: 24 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (24 corresponding lines) src/ssh.rs:87— src/ssh.rs:87-112 | src/ssh.rs:133-156 — These two members are one piece of code written twice and then edited apart: 24 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (24 corresponding lines) src/ai.rs:4985— src/ai.rs:4985-5009 | src/codex_telemetry.rs:131-154 — These two members are one piece of code written twice and then edited apart: 24 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (21 corresponding lines) · ×5
Edited copy of a member (21 corresponding lines) src/commit.rs:3406— src/commit.rs:3406-3429 | src/invariants.rs:181-201 — These two members are one piece of code written twice and then edited apart: 21 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (21 corresponding lines) src/deploy.rs:1461— src/deploy.rs:1461-1481 | src/release_signing.rs:230-257 — These two members are one piece of code written twice and then edited apart: 21 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (21 corresponding lines) src/otp.rs:96— src/otp.rs:96-116 | src/otp.rs:123-147 — These two members are one piece of code written twice and then edited apart: 21 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (21 corresponding lines) src/undo.rs:173— src/undo.rs:173-193 | src/undo.rs:196-223 — These two members are one piece of code written twice and then edited apart: 21 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (21 corresponding lines) src/skills.rs:557— src/skills.rs:557-580 | src/tools.rs:228-248 — These two members are one piece of code written twice and then edited apart: 21 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (14 corresponding lines) · ×5
Edited copy of a member (14 corresponding lines) src/git_guard.rs:322— src/git_guard.rs:322-341 | src/jj.rs:3541-3554 — These two members are one piece of code written twice and then edited apart: 14 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (14 corresponding lines) src/ai.rs:13767— src/ai.rs:13767-13780 | src/codex_text.rs:21-40 — These two members are one piece of code written twice and then edited apart: 14 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (14 corresponding lines) src/codex_memory.rs:1314— src/codex_memory.rs:1314-1328 | src/codex_memory.rs:1330-1343 — These two members are one piece of code written twice and then edited apart: 14 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (14 corresponding lines) src/commit.rs:13118— src/commit.rs:13118-13132 | src/updates.rs:490-503 — These two members are one piece of code written twice and then edited apart: 14 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (14 corresponding lines) src/flox.rs:153— src/flox.rs:153-168 | src/terminal.rs:212-225 — These two members are one piece of code written twice and then edited apart: 14 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Duplicated block (21 lines × 2) src/ai.rs:14594— src/ai.rs:14594-14614 | src/ai.rs:14670-14690 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:14594` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (21 lines × 2) src/commit.rs:2013— src/commit.rs:2013-2033 | src/commit.rs:3951-3971 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (21 lines × 2) src/ext.rs:364— src/ext.rs:364-384 | src/jj.rs:3362-3382 — before extracting anything, compare `src/ext.rs` and `src/jj.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 51 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (21 lines × 2) src/tasks.rs:2875— src/tasks.rs:2875-2895 | src/tasks.rs:2922-2942 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (21 lines × 2) src/deploy_setup.rs:868— src/deploy_setup.rs:868-888 | src/env_setup.rs:767-787 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (8–9 lines × 2) src/ai.rs:2487— src/ai.rs:2487-2495 | src/ai.rs:7304-7311 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:2487` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8–9 lines × 2) src/ask.rs:525— src/ask.rs:525-533 | src/task_match.rs:40-47 — before extracting anything, compare `src/ask.rs` and `src/task_match.rs` as WHOLE FILES: this scan already matched 7 separate duplicated blocks between them, totalling at least 166 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/task_match.rs:48` calls `extend`, `iter`, `to_string` and `src/ask.rs:533` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (8–9 lines × 2) src/ext.rs:330— src/ext.rs:330-337 | src/jj.rs:3590-3598 — before extracting anything, compare `src/ext.rs` and `src/jj.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 51 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/ext.rs:330` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (8–9 lines × 2) src/macos.rs:236— src/macos.rs:236-243 | src/macos.rs:245-253 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/macos.rs:236` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (8–9 lines × 2) src/trace.rs:158— src/trace.rs:158-165 | src/trace.rs:260-268 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/trace.rs:158` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
D4 · Code Duplication· Edited copy of a member (30 corresponding lines) · ×4
Edited copy of a member (30 corresponding lines) src/codex_runtime.rs:288— src/codex_runtime.rs:288-317 | src/codex_runtime.rs:798-832 — These two members are one piece of code written twice and then edited apart: 30 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (30 corresponding lines) src/codex_skill_eval.rs:128— src/codex_skill_eval.rs:128-157 | src/codex_skill_eval.rs:163-195 — These two members are one piece of code written twice and then edited apart: 30 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (30 corresponding lines) src/env.rs:589— src/env.rs:589-618 | src/ssh_keys.rs:576-605 — These two members are one piece of code written twice and then edited apart: 30 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (30 corresponding lines) src/commit.rs:2576— src/commit.rs:2576-2605 | src/commit.rs:2703-2740 — These two members are one piece of code written twice and then edited apart: 30 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (31 corresponding lines) · ×4
Edited copy of a member (31 corresponding lines) src/env.rs:1516— src/env.rs:1516-1546 | src/env.rs:1555-1588 — These two members are one piece of code written twice and then edited apart: 31 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (31 corresponding lines) src/ask.rs:653— src/ask.rs:653-683 | src/task_match.rs:429-470 — These two members are one piece of code written twice and then edited apart: 31 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (31 corresponding lines) src/agents.rs:219— src/agents.rs:219-256 | src/agents.rs:390-420 — These two members are one piece of code written twice and then edited apart: 31 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (31 corresponding lines) src/branches.rs:152— src/branches.rs:152-183 | src/branches.rs:185-215 — These two members are one piece of code written twice and then edited apart: 31 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (27 corresponding lines) · ×4
Edited copy of a member (27 corresponding lines) src/deps.rs:954— src/deps.rs:954-983 | src/deps.rs:990-1016 — These two members are one piece of code written twice and then edited apart: 27 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (27 corresponding lines) src/codex_runtime.rs:520— src/codex_runtime.rs:520-546 | src/skills.rs:229-263 — These two members are one piece of code written twice and then edited apart: 27 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (27 corresponding lines) src/ai.rs:1930— src/ai.rs:1930-1956 | src/ai.rs:1980-2006 — These two members are one piece of code written twice and then edited apart: 27 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (27 corresponding lines) src/sync.rs:2744— src/sync.rs:2744-2772 | src/sync.rs:3043-3069 — These two members are one piece of code written twice and then edited apart: 27 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (23 corresponding lines) · ×4
Edited copy of a member (23 corresponding lines) src/env.rs:853— src/env.rs:853-875 | src/ssh_keys.rs:623-645 — These two members are one piece of code written twice and then edited apart: 23 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (23 corresponding lines) src/commit.rs:10070— src/commit.rs:10070-10093 | src/commit.rs:10095-10117 — These two members are one piece of code written twice and then edited apart: 23 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (23 corresponding lines) src/commit.rs:974— src/commit.rs:974-996 | src/commit.rs:1274-1300 — These two members are one piece of code written twice and then edited apart: 23 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (23 corresponding lines) src/changes.rs:203— src/changes.rs:203-225 | src/ssh_keys.rs:712-741 — These two members are one piece of code written twice and then edited apart: 23 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (17 corresponding lines) · ×4
Edited copy of a member (17 corresponding lines) src/todo.rs:240— src/todo.rs:240-257 | src/todo.rs:259-275 — These two members are one piece of code written twice and then edited apart: 17 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (17 corresponding lines) src/usage.rs:706— src/usage.rs:706-722 | src/usage.rs:724-740 — These two members are one piece of code written twice and then edited apart: 17 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (17 corresponding lines) src/changes.rs:729— src/changes.rs:729-745 | src/env.rs:1214-1232 — These two members are one piece of code written twice and then edited apart: 17 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (17 corresponding lines) src/jj.rs:2193— src/jj.rs:2193-2210 | src/sync.rs:4773-4789 — These two members are one piece of code written twice and then edited apart: 17 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Duplicated block (22 lines × 2) src/commit.rs:1647— src/commit.rs:1647-1668 | src/commit.rs:1673-1694 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (22 lines × 2) src/commit.rs:9635— src/commit.rs:9635-9656 | src/commit.rs:11737-11758 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (22 lines × 2) src/tasks.rs:2455— src/tasks.rs:2455-2476 | src/tasks.rs:2525-2546 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit. Note first that the copies are not typed on the same thing: the declarations holding them bind `cmd` to `&mut Command` in one and `&mut CommandBuilder` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (22 lines × 2) src/log_server.rs:589— src/log_server.rs:589-610 | src/server.rs:486-507 — before extracting anything, compare `src/log_server.rs` and `src/server.rs` as WHOLE FILES: this scan already matched 18 separate duplicated blocks between them, totalling at least 276 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (9–10 lines × 2) src/code.rs:67— src/code.rs:67-75 | src/tasks.rs:743-752 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/code.rs:67` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9–10 lines × 2) src/deploy_setup.rs:837— src/deploy_setup.rs:837-846 | src/env_setup.rs:737-745 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy_setup.rs:837` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9–10 lines × 2) src/setup.rs:2483— src/setup.rs:2483-2492 | src/setup.rs:2668-2676 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (9–10 lines × 2) src/sync.rs:1373— src/sync.rs:1373-1381 | src/sync.rs:1385-1394 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/sync.rs:1373` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9 lines × 3) src/skills.rs:1387— src/skills.rs:1387-1396 | src/skills.rs:1402-1410 | src/skills.rs:1416-1424 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/skills.rs:1387` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9 lines × 3) src/macos.rs:692— src/macos.rs:692-700 | src/macos.rs:715-723 | src/macos.rs:740-748 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/macos.rs:692` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (9 lines × 3) src/url_inspect.rs:440— src/url_inspect.rs:440-448 | src/url_inspect.rs:578-586 | src/url_inspect.rs:722-730 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited.
Duplicated block (9 lines × 3) src/commit.rs:6209— src/commit.rs:6209-6217 | src/commit.rs:12871-12879 | src/commit.rs:12956-12964 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:6209` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/commit.rs:6205` calls `elapsed`, `as_millis` and `src/commit.rs:12869` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (7–8 lines × 2) crates/flow_commit_scan/src/lib.rs:165— crates/flow_commit_scan/src/lib.rs:165-171 | crates/flow_commit_scan/src/lib.rs:173-180 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `crates/flow_commit_scan/src/lib.rs:173` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (7–8 lines × 2) src/ask.rs:288— src/ask.rs:288-295 | src/commit.rs:2952-2958 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (7–8 lines × 2) src/branches.rs:365— src/branches.rs:365-371 | src/commit.rs:12550-12557 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (7–8 lines × 2) src/commit.rs:9469— src/commit.rs:9469-9476 | src/commit.rs:9516-9522 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:9469` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
ParallelRunner::run_task (cognitive 26) src/parallel.rs:209— ParallelRunner::run_task has cognitive complexity 26 (threshold 15). Drivers by points: if/else 14 (21 pts), loops 2 (4 pts), match/switch 1 (nesting depth added 9). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
ParallelRunner::strip_ansi (cognitive 16) src/parallel.rs:110— ParallelRunner::strip_ansi has cognitive complexity 16 (threshold 15). Drivers by points: if/else 4 (11 pts), loops 2 (5 pts) (nesting depth added 10). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
ParallelRunner::run (cognitive 16) src/parallel.rs:325— ParallelRunner::run has cognitive complexity 16 (threshold 15). Drivers by points: if/else 5 (11 pts), loops 4 (5 pts) (nesting depth added 7). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
TooManyFields: Config src/config.rs:21— TooManyFields — 43 stored fields. The bar is 30 stored fields; this is 13 over it, 1.43× the bar. This is width in DATA, not behaviour: every reader that takes the whole type couples to all of its fields, so a change to any one of them is a change every reader has to be checked against. To reduce it, group the fields that are read together by the same callers into a smaller type of their own, and have this one hold that type as a single member — each reader then names only the group it uses.
TooManyFields: CodexDoctorSnapshot src/ai.rs:8424— TooManyFields — 36 stored fields. The bar is 30 stored fields; this is 6 over it, 1.20× the bar. This is width in DATA, not behaviour: every reader that takes the whole type couples to all of its fields, so a change to any one of them is a change every reader has to be checked against. To reduce it, group the fields that are read together by the same callers into a smaller type of their own, and have this one hold that type as a single member — each reader then names only the group it uses.
TooManyFields: SessionDocPacket src/codex_session_docs.rs:56— TooManyFields — 32 stored fields. The bar is 30 stored fields; this is 2 over it, 1.07× the bar. This is width in DATA, not behaviour: every reader that takes the whole type couples to all of its fields, so a change to any one of them is a change every reader has to be checked against. To reduce it, group the fields that are read together by the same callers into a smaller type of their own, and have this one hold that type as a single member — each reader then names only the group it uses.
TooManyFunctions: flowd::daemon src/daemon.rs:24— TooManyFunctions — 34 free functions. The bar is 30 free functions; this is 4 over it, 1.13× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
TooManyFunctions: flowd::ssh src/ssh.rs:17— TooManyFunctions — 33 free functions. The bar is 30 free functions; this is 3 over it, 1.10× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
TooManyFunctions: flowd::activity_log src/activity_log.rs:107— TooManyFunctions — 32 free functions. The bar is 30 free functions; this is 2 over it, 1.07× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
D30 · Dependency Vulnerabilities· Medium vulnerability · ×3
REDACTED
REDACTED
REDACTED
D4 · Code Duplication· Edited copy of a member (26 corresponding lines) · ×3
Edited copy of a member (26 corresponding lines) src/codex_memory.rs:1177— src/codex_memory.rs:1177-1202 | src/codex_memory.rs:1204-1240 — These two members are one piece of code written twice and then edited apart: 26 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (26 corresponding lines) src/codex_session_docs.rs:1356— src/codex_session_docs.rs:1356-1383 | src/codex_session_docs.rs:1619-1644 — These two members are one piece of code written twice and then edited apart: 26 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (26 corresponding lines) src/code.rs:1303— src/code.rs:1303-1328 | src/code.rs:1474-1503 — These two members are one piece of code written twice and then edited apart: 26 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (32 corresponding lines) · ×3
Edited copy of a member (32 corresponding lines) src/ai.rs:2898— src/ai.rs:2898-2929 | src/ai.rs:2955-2986 — These two members are one piece of code written twice and then edited apart: 32 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (32 corresponding lines) src/agents.rs:738— src/agents.rs:738-772 | src/agents.rs:1004-1035 — These two members are one piece of code written twice and then edited apart: 32 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (32 corresponding lines) src/commits.rs:50— src/commits.rs:50-81 | src/commits.rs:83-114 — These two members are one piece of code written twice and then edited apart: 32 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (25 corresponding lines) · ×3
Edited copy of a member (25 corresponding lines) src/supervisor.rs:105— src/supervisor.rs:105-129 | src/supervisor.rs:131-155 — These two members are one piece of code written twice and then edited apart: 25 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (25 corresponding lines) src/config.rs:2806— src/config.rs:2806-2830 | src/config.rs:2841-2865 — These two members are one piece of code written twice and then edited apart: 25 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (25 corresponding lines) src/deploy_setup.rs:740— src/deploy_setup.rs:740-772 | src/env_setup.rs:665-689 — These two members are one piece of code written twice and then edited apart: 25 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copies of one member (3 members, 14+ corresponding lines) · ×3
Edited copies of one member (3 members, 14+ corresponding lines) src/external_cli.rs:518— src/external_cli.rs:518-531 | src/external_cli.rs:533-549 | src/sync_plan.rs:1605-1618 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 14 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
Edited copies of one member (3 members, 14+ corresponding lines) src/commit.rs:8573— src/commit.rs:8573-8586 | src/storage.rs:487-506 | src/sync.rs:2546-2564 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 14 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
Edited copies of one member (3 members, 14+ corresponding lines) src/ai_taskd.rs:902— src/ai_taskd.rs:902-915 | src/ai_taskd.rs:932-945 | src/bin/ai_taskd_client.rs:264-277 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 14 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (3 members, 8+ corresponding lines) · ×3
Edited copies of one member (3 members, 8+ corresponding lines) src/home.rs:200— src/home.rs:200-208 | src/setup.rs:258-266 | src/sync.rs:4492-4499 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 8 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
Edited copies of one member (3 members, 8+ corresponding lines) src/ai.rs:14470— src/ai.rs:14470-14478 | src/deploy.rs:290-298 | src/todo.rs:277-284 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 8 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
Edited copies of one member (3 members, 8+ corresponding lines) src/ai_everruns.rs:783— src/ai_everruns.rs:783-791 | src/ai_taskd.rs:744-751 | src/bin/ai_taskd_client.rs:316-323 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 8 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication· Edited copy of a member (4 corresponding lines) · ×3
Edited copy of a member (4 corresponding lines) src/activity_log.rs:391— src/activity_log.rs:391-394 | src/repo_capsule.rs:1069-1072 — These two members are one piece of code written twice and then edited apart: 4 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (4 corresponding lines) src/health.rs:405— src/health.rs:405-408 | src/install.rs:918-921 — These two members are one piece of code written twice and then edited apart: 4 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (4 corresponding lines) src/ai.rs:2312— src/ai.rs:2312-2319 | src/tools.rs:33-36 — These two members are one piece of code written twice and then edited apart: 4 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Duplicated block (31 lines × 2) src/commit.rs:13935— src/commit.rs:13935-13965 | src/commit.rs:14239-14269 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/commit.rs:13932` calls `as_ref` and `src/commit.rs:14236` does not — after which the two agree again for 4 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (31 lines × 2) src/deploy_setup.rs:686— src/deploy_setup.rs:686-716 | src/env_setup.rs:611-641 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (31 lines × 2) src/deploy.rs:389— src/deploy.rs:389-419 | src/deploy.rs:528-558 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy.rs:389` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (26 lines × 2) src/code.rs:1014— src/code.rs:1014-1039 | src/code.rs:1081-1106 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/code.rs:1014` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (26 lines × 2) src/log_server.rs:722— src/log_server.rs:722-747 | src/server.rs:1260-1285 — before extracting anything, compare `src/log_server.rs` and `src/server.rs` as WHOLE FILES: this scan already matched 18 separate duplicated blocks between them, totalling at least 276 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (26 lines × 2) src/ssh_keys.rs:744— src/ssh_keys.rs:744-769 | src/ssh_keys.rs:772-797 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (17–18 lines × 2) src/ai_taskd.rs:517— src/ai_taskd.rs:517-534 | src/ai_taskd.rs:544-560 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai_taskd.rs:517` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (17–18 lines × 2) src/env.rs:2524— src/env.rs:2524-2540 | src/env.rs:3483-3500 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/env.rs:2524` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/env.rs:2542` calls `status` and `src/env.rs:3502` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (17–18 lines × 2) src/env.rs:3215— src/env.rs:3215-3231 | src/env.rs:3293-3310 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/env.rs:3215` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/env.rs:3313` calls `Some`, `as_ref`, `and_then` and `src/env.rs:3232` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (14–16 lines × 2) src/ai.rs:4487— src/ai.rs:4487-4502 | src/ai.rs:5552-5565 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:4487` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/ai.rs:4505` calls `arg` and `src/ai.rs:5568` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (14–16 lines × 2) src/ask.rs:360— src/ask.rs:360-373 | src/task_match.rs:405-420 — before extracting anything, compare `src/ask.rs` and `src/task_match.rs` as WHOLE FILES: this scan already matched 7 separate duplicated blocks between them, totalling at least 166 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (14–16 lines × 2) src/env.rs:2279— src/env.rs:2279-2292 | src/env.rs:3353-3368 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/env.rs:2279` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (13 lines × 3) src/ai_tasks.rs:738— src/ai_tasks.rs:738-750 | src/recipe.rs:412-424 | src/recipe.rs:444-456 — before extracting anything, compare `src/ai_tasks.rs` and `src/recipe.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 62 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai_tasks.rs:738` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (13 lines × 3) src/sync.rs:5518— src/sync.rs:5518-5530 | src/sync.rs:5545-5557 | src/upstream.rs:603-615 — before extracting anything, compare `src/sync.rs` and `src/upstream.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 50 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/sync.rs:5518` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (13 lines × 3) src/changes.rs:710— src/changes.rs:710-722 | src/env.rs:1047-1059 | src/storage.rs:494-506 — before extracting anything, compare `src/changes.rs` and `src/env.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 39 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/changes.rs:710` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12–13 lines × 3) src/commit.rs:2138— src/commit.rs:2138-2150 | src/commit.rs:2310-2321 | src/commit.rs:4574-4585 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:2138` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12–13 lines × 3) src/jd.rs:594— src/jd.rs:594-605 | src/jd.rs:608-619 | src/jd.rs:623-635 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/jd.rs:623` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (12–13 lines × 3) src/log_server.rs:758— src/log_server.rs:758-769 | src/log_server.rs:803-814 | src/log_server.rs:857-869 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/log_server.rs:758` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12 lines × 3) crates/flow_commit_scan/src/lib.rs:201— crates/flow_commit_scan/src/lib.rs:201-212 | src/commit.rs:251-262 | src/commit.rs:548-559 — there are 3 copies across 2 file(s) — more copies than files, so at least one file holds the block twice. Extract it once into a single shared function every call site can reach and call it from all 3 sites; resolving a subset leaves the remainder to drift apart. Read the line range as the matched WINDOW rather than a finished unit: at `crates/flow_commit_scan/src/lib.rs:201` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12 lines × 3) src/deploy.rs:2236— src/deploy.rs:2236-2247 | src/deploy.rs:2424-2435 | src/setup.rs:1185-1196 — there are 3 copies across 2 file(s) — more copies than files, so at least one file holds the block twice. Extract it once into a single shared function every call site can reach and call it from all 3 sites; resolving a subset leaves the remainder to drift apart. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy.rs:2236` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12 lines × 3) src/workflow.rs:796— src/workflow.rs:796-807 | src/workflow.rs:835-846 | src/workflow.rs:992-1003 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/workflow.rs:796` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (11–12 lines × 2) src/commit.rs:249— src/commit.rs:249-260 | src/commit.rs:6616-6626 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (11–12 lines × 2) src/commit.rs:859— src/commit.rs:859-869 | src/commit.rs:1111-1122 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:859` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (11–12 lines × 2) src/todo.rs:463— src/todo.rs:463-474 | src/todo.rs:504-514 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (11 lines × 4) crates/flow_commit_scan/src/lib.rs:201— crates/flow_commit_scan/src/lib.rs:201-212 | src/commit.rs:251-262 | src/commit.rs:548-559 | src/commit.rs:6618-6628 — there are 4 copies across 2 file(s) — more copies than files, so at least one file holds the block twice. Extract it once into a single shared function every call site can reach and call it from all 4 sites; resolving a subset leaves the remainder to drift apart. Read the line range as the matched WINDOW rather than a finished unit: at `crates/flow_commit_scan/src/lib.rs:201` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (11 lines × 4) src/changes.rs:705— src/changes.rs:705-715 | src/commit.rs:8574-8584 | src/env.rs:1042-1052 | src/sync.rs:2547-2557 — before extracting anything, compare `src/changes.rs` and `src/env.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 39 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (11 lines × 4) src/commit.rs:2303— src/commit.rs:2303-2313 | src/commit.rs:4567-4577 | src/commit.rs:7820-7830 | src/commit.rs:9343-9353 — all 4 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:2303` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 4) src/commit.rs:8455— src/commit.rs:8455-8462 | src/commit.rs:8474-8481 | src/commit.rs:12279-12286 | src/commit.rs:12691-12698 — all 4 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:8455` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 4) src/explain_commits.rs:105— src/explain_commits.rs:105-112 | src/sync.rs:5452-5459 | src/sync.rs:5478-5485 | src/upstream.rs:588-595 — before extracting anything, compare `src/sync.rs` and `src/upstream.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 50 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/explain_commits.rs:105` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/sync.rs:5477` calls `current_dir` and `src/sync.rs:5451` does not — after which the two agree again for 4 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (8 lines × 4) src/config.rs:2734— src/config.rs:2734-2741 | src/config.rs:2753-2760 | src/setup.rs:3033-3040 | src/workflow.rs:1271-1278 — there are 4 copies across 3 file(s) — more copies than files, so at least one file holds the block twice. Extract it once into a single shared function every call site can reach and call it from all 4 sites; resolving a subset leaves the remainder to drift apart. Note first that the copies are not typed on the same thing: the declarations holding them bind `value` to `&str` in one and `String` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
flow_commit_scan::scan_diff_for_secrets (cognitive 54) crates/flow_commit_scan/src/lib.rs:198— flow_commit_scan::scan_diff_for_secrets has cognitive complexity 54 (threshold 15). Drivers by points: if/else 16 (44 pts), boolean chains 6, loops 2 (4 pts) (nesting depth added 30). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
flow_commit_scan::generic_secret_assignment_is_false_positive (cognitive 19) crates/flow_commit_scan/src/lib.rs:163— flow_commit_scan::generic_secret_assignment_is_false_positive has cognitive complexity 19 (threshold 15). Drivers by points: if/else 9 (15 pts), boolean chains 4 (nesting depth added 6). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D30 · Dependency Vulnerabilities· Medium advisory (unmaintained) · ×2
Near-duplicate member pair (43 shared lines) src/commit.rs:824— src/commit.rs:824-912 | src/commit.rs:1043-1150 — These two members are variants of one another: 43 of their lines are already reported as duplicated blocks below, spread through both bodies rather than gathered into one. Read them as a single construct written twice. The repair is at the members' grain — factor the shared pipeline into one implementation the two call with their differences as parameters or as an injected step, or, where the difference is systematic (sync against async, one transport against another), generate one from the other. Extracting the individual blocks below is not the same fix: it leaves the two bodies in place and the next edit still has to be made twice.
Near-duplicate member pair (43 shared lines) src/commit.rs:914— src/commit.rs:914-968 | src/commit.rs:1193-1247 — These two members are variants of one another: 43 of their lines are already reported as duplicated blocks below, spread through both bodies rather than gathered into one. Read them as a single construct written twice. The repair is at the members' grain — factor the shared pipeline into one implementation the two call with their differences as parameters or as an injected step, or, where the difference is systematic (sync against async, one transport against another), generate one from the other. Extracting the individual blocks below is not the same fix: it leaves the two bodies in place and the next edit still has to be made twice.
D4 · Code Duplication· Edited copy of a member (37 corresponding lines) · ×2
Edited copy of a member (37 corresponding lines) src/deploy.rs:2992— src/deploy.rs:2992-3042 | src/deploy.rs:3044-3087 — These two members are one piece of code written twice and then edited apart: 37 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (37 corresponding lines) src/workflow.rs:787— src/workflow.rs:787-823 | src/workflow.rs:983-1021 — These two members are one piece of code written twice and then edited apart: 37 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (67 corresponding lines) · ×2
Edited copy of a member (67 corresponding lines) src/sync_plan.rs:914— src/sync_plan.rs:914-980 | src/updates.rs:902-978 — These two members are one piece of code written twice and then edited apart: 67 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (67 corresponding lines) src/ai.rs:14584— src/ai.rs:14584-14653 | src/ai.rs:14655-14721 — These two members are one piece of code written twice and then edited apart: 67 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (61 corresponding lines) · ×2
Edited copy of a member (61 corresponding lines) src/code.rs:1011— src/code.rs:1011-1071 | src/code.rs:1078-1152 — These two members are one piece of code written twice and then edited apart: 61 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (61 corresponding lines) src/sync.rs:5560— src/sync.rs:5560-5635 | src/sync.rs:5643-5703 — These two members are one piece of code written twice and then edited apart: 61 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (46 corresponding lines) · ×2
Edited copy of a member (46 corresponding lines) src/codex_skill_eval.rs:614— src/codex_skill_eval.rs:614-672 | src/history.rs:228-273 — These two members are one piece of code written twice and then edited apart: 46 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (46 corresponding lines) src/commits.rs:152— src/commits.rs:152-216 | src/commits.rs:427-472 — These two members are one piece of code written twice and then edited apart: 46 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (50 corresponding lines) · ×2
Edited copy of a member (50 corresponding lines) src/ai.rs:7052— src/ai.rs:7052-7101 | src/ai.rs:7178-7235 — These two members are one piece of code written twice and then edited apart: 50 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (50 corresponding lines) src/sync.rs:5770— src/sync.rs:5770-5819 | src/upstream.rs:619-673 — These two members are one piece of code written twice and then edited apart: 50 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (45 corresponding lines) · ×2
Edited copy of a member (45 corresponding lines) src/commit.rs:11563— src/commit.rs:11563-11616 | src/pr_edit.rs:575-619 — These two members are one piece of code written twice and then edited apart: 45 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (45 corresponding lines) src/macos.rs:683— src/macos.rs:683-729 | src/macos.rs:732-776 — These two members are one piece of code written twice and then edited apart: 45 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (48 corresponding lines) · ×2
Edited copy of a member (48 corresponding lines) src/ai.rs:2989— src/ai.rs:2989-3036 | src/ai.rs:3039-3098 — These two members are one piece of code written twice and then edited apart: 48 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (48 corresponding lines) src/skills.rs:310— src/skills.rs:310-357 | src/tools.rs:53-100 — These two members are one piece of code written twice and then edited apart: 48 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (40 corresponding lines) · ×2
Edited copy of a member (40 corresponding lines) src/commit.rs:14116— src/commit.rs:14116-14155 | src/skills.rs:674-713 — These two members are one piece of code written twice and then edited apart: 40 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (40 corresponding lines) src/ai.rs:14245— src/ai.rs:14245-14284 | src/commit.rs:11915-11956 — These two members are one piece of code written twice and then edited apart: 40 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (42 corresponding lines) · ×2
Edited copy of a member (42 corresponding lines) src/commit.rs:2754— src/commit.rs:2754-2797 | src/commit.rs:2799-2840 — These two members are one piece of code written twice and then edited apart: 42 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (42 corresponding lines) src/commit.rs:1889— src/commit.rs:1889-1930 | src/commit.rs:1934-1976 — These two members are one piece of code written twice and then edited apart: 42 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (33 corresponding lines) · ×2
Edited copy of a member (33 corresponding lines) src/recipe.rs:323— src/recipe.rs:323-365 | src/recipe.rs:367-399 — These two members are one piece of code written twice and then edited apart: 33 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (33 corresponding lines) src/upgrade.rs:182— src/upgrade.rs:182-214 | src/upgrade.rs:217-258 — These two members are one piece of code written twice and then edited apart: 33 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (22 corresponding lines) · ×2
Edited copy of a member (22 corresponding lines) src/deps.rs:478— src/deps.rs:478-499 | src/fix.rs:169-190 — These two members are one piece of code written twice and then edited apart: 22 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (22 corresponding lines) src/commit.rs:12405— src/commit.rs:12405-12426 | src/commit.rs:12428-12453 — These two members are one piece of code written twice and then edited apart: 22 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (29 corresponding lines) · ×2
Edited copy of a member (29 corresponding lines) src/code.rs:1229— src/code.rs:1229-1263 | src/code.rs:1265-1293 — These two members are one piece of code written twice and then edited apart: 29 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (29 corresponding lines) src/commit.rs:13531— src/commit.rs:13531-13565 | src/todo.rs:317-345 — These two members are one piece of code written twice and then edited apart: 29 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copies of one member (3 members, 12+ corresponding lines) · ×2
Edited copies of one member (3 members, 12+ corresponding lines) src/jj.rs:3396— src/jj.rs:3396-3407 | src/sync_plan.rs:1757-1768 | src/updates.rs:1486-1499 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 12 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
Edited copies of one member (3 members, 12+ corresponding lines) src/fix.rs:274— src/fix.rs:274-285 | src/jj.rs:3409-3421 | src/upstream.rs:586-598 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 12 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (3 members, 11+ corresponding lines) · ×2
Edited copies of one member (3 members, 11+ corresponding lines) src/home.rs:614— src/home.rs:614-629 | src/init.rs:54-64 | src/secrets.rs:215-225 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 11 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
Edited copies of one member (3 members, 11+ corresponding lines) src/home.rs:691— src/home.rs:691-702 | src/pr_preview.rs:1529-1545 | src/repos.rs:1513-1523 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 11 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (3 members, 4+ corresponding lines) · ×2
Edited copies of one member (3 members, 4+ corresponding lines) src/ai.rs:6313— src/ai.rs:6313-6316 | src/jj.rs:3423-3426 | src/tasks.rs:2042-2046 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 4 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
Edited copies of one member (3 members, 4+ corresponding lines) src/ai_project_manifest.rs:133— src/ai_project_manifest.rs:133-136 | src/config.rs:2447-2452 | src/project_snapshot.rs:209-214 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 4 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
Duplicated block (39 lines × 2) src/log_server.rs:681— src/log_server.rs:681-719 | src/server.rs:1218-1256 — before extracting anything, compare `src/log_server.rs` and `src/server.rs` as WHOLE FILES: this scan already matched 18 separate duplicated blocks between them, totalling at least 276 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (39 lines × 2) src/ai.rs:7060— src/ai.rs:7060-7098 | src/ai.rs:7195-7233 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (21–22 lines × 2) src/commit.rs:15666— src/commit.rs:15666-15687 | src/commit.rs:15726-15746 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:15666` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (21–22 lines × 2) src/deps.rs:833— src/deps.rs:833-853 | src/deps.rs:871-892 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/deps.rs:833` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (19–21 lines × 2) src/repos.rs:254— src/repos.rs:254-272 | src/repos.rs:282-302 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/repos.rs:254` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (19–21 lines × 2) src/upstream.rs:292— src/upstream.rs:292-312 | src/upstream.rs:404-422 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/upstream.rs:292` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (20 lines × 2) src/deploy_setup.rs:753— src/deploy_setup.rs:753-772 | src/env_setup.rs:670-689 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy_setup.rs:753` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note first that the copies are not typed on the same thing: the declarations holding them bind `app` to `&mut DeploySetupApp` in one and `&mut EnvSetupApp` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (20 lines × 2) src/commit.rs:12228— src/commit.rs:12228-12248 | src/commit.rs:12651-12670 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:12228` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (18–19 lines × 2) src/commit.rs:3300— src/commit.rs:3300-3317 | src/invariants.rs:114-132 — before extracting anything, compare `src/commit.rs` and `src/invariants.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 40 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:3300` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (18–19 lines × 2) src/sync_plan.rs:1390— src/sync_plan.rs:1390-1407 | src/updates.rs:1304-1322 — before extracting anything, compare `src/sync_plan.rs` and `src/updates.rs` as WHOLE FILES: this scan already matched 15 separate duplicated blocks between them, totalling at least 231 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/sync_plan.rs:1390` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (15–16 lines × 2) src/ai.rs:14255— src/ai.rs:14255-14270 | src/commit.rs:11927-11941 — before extracting anything, compare `src/ai.rs` and `src/commit.rs` as WHOLE FILES: this scan already matched 5 separate duplicated blocks between them, totalling at least 61 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:14255` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (15–16 lines × 2) src/upgrade.rs:186— src/upgrade.rs:186-201 | src/upgrade.rs:222-236 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/upgrade.rs:186` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (14–15 lines × 2) src/agents.rs:1045— src/agents.rs:1045-1058 | src/agents.rs:1092-1106 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/agents.rs:1045` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (14–15 lines × 2) src/help_search.rs:129— src/help_search.rs:129-143 | src/help_search.rs:198-211 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/help_search.rs:129` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (14 lines × 3) src/ai.rs:1642— src/ai.rs:1642-1655 | src/ai.rs:1726-1739 | src/ai.rs:14072-14085 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:1642` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (14 lines × 3) src/install.rs:903— src/install.rs:903-916 | src/services.rs:484-497 | src/setup.rs:2966-2979 — before extracting anything, compare `src/services.rs` and `src/setup.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 70 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (12–14 lines × 3) src/ai.rs:3022— src/ai.rs:3022-3033 | src/ai.rs:3082-3095 | src/ai.rs:15818-15829 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:3022` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12–14 lines × 3) src/env.rs:325— src/env.rs:325-336 | src/env.rs:352-363 | src/env.rs:413-426 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/env.rs:413` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (12–13 lines × 2) src/env.rs:2924— src/env.rs:2924-2935 | src/env.rs:2951-2963 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/env.rs:2951` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12–13 lines × 2) src/sync.rs:1837— src/sync.rs:1837-1849 | src/sync.rs:3797-3808 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/sync.rs:1837` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12 lines × 5) src/commit.rs:2152— src/commit.rs:2152-2163 | src/commit.rs:2322-2333 | src/commit.rs:4586-4597 | src/commit.rs:7838-7849 | src/commit.rs:9361-9372 — all 5 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:2152` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (12 lines × 5) src/deps.rs:167— src/deps.rs:167-178 | src/env.rs:1352-1363 | src/services.rs:451-462 | src/storage.rs:508-519 | src/todo.rs:584-595 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from all 5 call sites, so a change lands once.
Duplicated block (12 lines × 4) src/log_server.rs:493— src/log_server.rs:493-504 | src/log_server.rs:521-532 | src/server.rs:391-402 | src/server.rs:419-430 — before extracting anything, compare `src/log_server.rs` and `src/server.rs` as WHOLE FILES: this scan already matched 18 separate duplicated blocks between them, totalling at least 276 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/log_server.rs:493` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12 lines × 4) src/deploy.rs:863— src/deploy.rs:863-874 | src/project_snapshot.rs:327-338 | src/publish.rs:659-670 | src/registry.rs:578-589 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from all 4 call sites, so a change lands once.
Duplicated block (10–12 lines × 4) src/publish.rs:900— src/publish.rs:900-911 | src/publish.rs:921-932 | src/services.rs:509-518 | src/setup.rs:2944-2953 — before extracting anything, compare `src/services.rs` and `src/setup.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 70 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (10–12 lines × 4) src/sync_plan.rs:1042— src/sync_plan.rs:1042-1051 | src/sync_plan.rs:1395-1406 | src/updates.rs:1110-1119 | src/updates.rs:1310-1321 — before extracting anything, compare `src/sync_plan.rs` and `src/updates.rs` as WHOLE FILES: this scan already matched 15 separate duplicated blocks between them, totalling at least 231 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately. Note first that the copies are not typed on the same thing: the declarations holding them bind `evidence` to `&SyncPlanEvidence` in one and `&UpdateEvidence` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (9–12 lines × 2) src/commit.rs:845— src/commit.rs:845-853 | src/commit.rs:1077-1088 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:845` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9–12 lines × 2) src/commit.rs:895— src/commit.rs:895-903 | src/commit.rs:1094-1105 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:895` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9–10 lines × 4) src/ai.rs:9804— src/ai.rs:9804-9812 | src/ai.rs:9821-9829 | src/codex_session_docs.rs:973-981 | src/usage.rs:604-613 — before extracting anything, compare `src/ai.rs` and `src/codex_session_docs.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 34 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (9–10 lines × 4) src/ai.rs:14154— src/ai.rs:14154-14163 | src/commit.rs:7450-7459 | src/failure.rs:744-753 | src/sync.rs:3107-3115 — before extracting anything, compare `src/ai.rs` and `src/commit.rs` as WHOLE FILES: this scan already matched 5 separate duplicated blocks between them, totalling at least 61 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:14154` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (10 lines × 3) src/env.rs:1616— src/env.rs:1616-1625 | src/env.rs:2539-2548 | src/env.rs:4043-4052 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/env.rs:1616` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (10 lines × 3) src/tasks.rs:2622— src/tasks.rs:2622-2631 | src/tasks.rs:2886-2895 | src/tasks.rs:2933-2942 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/tasks.rs:2622` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8–9 lines × 3) src/code.rs:410— src/code.rs:410-418 | src/code.rs:1509-1517 | src/web.rs:287-294 — there are 3 copies across 2 file(s) — more copies than files, so at least one file holds the block twice. Extract it once into a single shared function every call site can reach and call it from all 3 sites; resolving a subset leaves the remainder to drift apart. Read the line range as the matched WINDOW rather than a finished unit: at `src/code.rs:410` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8–9 lines × 3) src/commit.rs:12573— src/commit.rs:12573-12581 | src/ext.rs:399-406 | src/repos.rs:1514-1521 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from all 3 call sites, so a change lands once.
Duplicated block (6–9 lines × 2) src/commit.rs:15278— src/commit.rs:15278-15283 | src/commit.rs:15376-15384 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:15278` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (6–9 lines × 2) scripts/bench-ai-runtime.py:64— scripts/bench-ai-runtime.py:64-69 | scripts/bench-cli-startup.py:68-76 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `scripts/bench-cli-startup.py:68` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (8 lines × 5) src/ai.rs:3431— src/ai.rs:3431-3438 | src/ai.rs:16034-16041 | src/code.rs:412-419 | src/code.rs:1511-1518 | src/web.rs:288-295 — before extracting anything, compare `src/ai.rs` and `src/code.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 44 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:3431` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 5) src/commit.rs:5324— src/commit.rs:5324-5331 | src/commit.rs:5502-5509 | src/commit.rs:5739-5746 | src/commit.rs:5873-5880 | src/commit.rs:6513-6520 — all 5 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:5324` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (7 lines × 3) src/upstream.rs:281— src/upstream.rs:281-287 | src/upstream.rs:395-401 | src/upstream.rs:444-450 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/upstream.rs:281` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (7 lines × 3) src/deploy.rs:1250— src/deploy.rs:1250-1256 | src/deploy.rs:2699-2705 | src/env.rs:2590-2596 — there are 3 copies across 2 file(s) — more copies than files, so at least one file holds the block twice. Extract it once into a single shared function every call site can reach and call it from all 3 sites; resolving a subset leaves the remainder to drift apart.
Duplicated block (6–7 lines × 2) src/server.rs:589— src/server.rs:589-595 | src/server.rs:722-727 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (6–7 lines × 2) src/skills.rs:479— src/skills.rs:479-484 | src/skills.rs:1293-1299 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/skills.rs:479` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/skills.rs:485` calls `create_dir_all` and `src/skills.rs:1300` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (6 lines × 4) src/branches.rs:368— src/branches.rs:368-373 | src/ext.rs:403-408 | src/publish.rs:723-728 | src/push.rs:353-358 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from all 4 call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/branches.rs:368` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/publish.rs:721` calls `current_dir` and `src/branches.rs:366` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (6 lines × 4) src/commit.rs:2940— src/commit.rs:2940-2945 | src/fish_install.rs:150-155 | src/fish_install.rs:162-167 | src/install.rs:956-961 — there are 4 copies across 3 file(s) — more copies than files, so at least one file holds the block twice. Extract it once into a single shared function every call site can reach and call it from all 4 sites; resolving a subset leaves the remainder to drift apart. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:2940` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Off the main sequence: opentui-lite — opentui-lite: abstractness 0.00, instability 0.00, distance 1.00 — zone of pain — concrete and depended on by 1 project(s), so it's rigid to change.
Off the main sequence: seq_client — seq_client: abstractness 0.00, instability 0.00, distance 1.00 — zone of pain — concrete and depended on by 1 project(s), so it's rigid to change.
No authorization src/log_server.rs:203— This repository serves requests — a server (axum::serve) (src/log_server.rs:203) — and no route guard, auth-gate middleware, global guard or imperative check that refuses a caller (401/403, an Unauthorized/Forbidden error) was found: its endpoints may be unprotected.
flow_commit_scan::scan_diff_for_secrets (cyclomatic 24) crates/flow_commit_scan/src/lib.rs:198— flow_commit_scan::scan_diff_for_secrets has cyclomatic complexity 24 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
EverrunsApi::read_sse_batch (cyclomatic 17) src/ai_everruns.rs:894— EverrunsApi::read_sse_batch has cyclomatic complexity 17 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
OptionsConfig::merge (cyclomatic 17) src/config.rs:1361— OptionsConfig::merge has cyclomatic complexity 17 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
bus factor 1 — one contributor carries this repository — 3 contributor(s) have commits in this repository (automation and bot accounts excluded), but the commits of a single one of them cover most of its history — 90% of the 468 commit(s) sampled — so the number of people who actually carry it is 1. This is not the ambient state of a solo project: there ARE other contributors, and if the one who carries the repository becomes unavailable, the knowledge behind most of its history goes with them. Spread the next changes deliberately — have a second contributor review or pair on them — and write down the parts only one person can currently change.
PrEditService::run_loop (cognitive 35) src/pr_edit.rs:179— PrEditService::run_loop has cognitive complexity 35 (threshold 15). Drivers by points: if/else 10 (26 pts), loops 3 (7 pts), match/switch 1 (2 pts) (nesting depth added 21). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
EverrunsApi::read_sse_batch (cognitive 22) src/ai_everruns.rs:894— EverrunsApi::read_sse_batch has cognitive complexity 22 (threshold 15). Drivers by points: if/else 9 (15 pts), match/switch 2 (4 pts), boolean chains 2, loops 1 (nesting depth added 8). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
OptionsConfig::merge (cognitive 16) src/config.rs:1361— OptionsConfig::merge has cognitive complexity 16 (threshold 15). Drivers by points: if/else 16. To reduce it, split the body: this score is breadth rather than depth — many checks laid out side by side rather than nested inside one another, so inverting conditions into early returns has nothing left to flatten. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
ClassTooLong: Commands src/cli.rs:68— ClassTooLong — 452 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), 0 methods. The bar is 400 significant lines; this is 52 over it, 1.13× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
Change coupling: cli.rs ↔ config.rs src/cli.rs:1— `src/cli.rs` and `src/config.rs` change together 57% of the time (37 of the 65 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets) with no explicit dependency between them. They sit in the same directory, but in this ecosystem each file is its own module — a sibling reference still needs an import — so the missing import edge is real: the coupling runs through shared behaviour, not a declared dependency. If they duplicate structure, extract the common part into one unit; otherwise the coupling is hidden and worth breaking. You can check this without leaving the row: of the 37 shared commits counted here, the most recent 3 are `a47f2aaa` feat(codex): add daemonized runtime skills and scorecards; `5d649f27` Harden env storage and add Codex URL resolution; `22c55336` feat: add jj workflow status and local env improvements — run `git show` on any of them.
D4 · Code Duplication· Near-duplicate member family (4 members, 30 shared lines) · ×1
Near-duplicate member family (4 members, 30 shared lines) src/ai.rs:14150— src/ai.rs:14150-14206 | src/commit.rs:7445-7495 | src/failure.rs:739-795 | src/sync.rs:3102-3149 — These 4 members are variants of one another: a block of 30 lines reported below appears in every one of them, and the pairwise near-duplicate rows they would otherwise produce are collapsed into this row. Read them as one construct written 4 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 4 times.
Near-duplicate member pair (155 shared lines) src/deploy_setup.rs:398— src/deploy_setup.rs:398-619 | src/env_setup.rs:359-544 — These two members are variants of one another: 155 of their lines are already reported as duplicated blocks below, spread through both bodies rather than gathered into one. Read them as a single construct written twice. The repair is at the members' grain — factor the shared pipeline into one implementation the two call with their differences as parameters or as an injected step, or, where the difference is systematic (sync against async, one transport against another), generate one from the other. Extracting the individual blocks below is not the same fix: it leaves the two bodies in place and the next edit still has to be made twice.
Near-duplicate member pair (34 shared lines) src/commit.rs:15269— src/commit.rs:15269-15326 | src/commit.rs:15339-15444 — These two members are variants of one another: 34 of their lines are already reported as duplicated blocks below, spread through both bodies rather than gathered into one. Read them as a single construct written twice. The repair is at the members' grain — factor the shared pipeline into one implementation the two call with their differences as parameters or as an injected step, or, where the difference is systematic (sync against async, one transport against another), generate one from the other. Extracting the individual blocks below is not the same fix: it leaves the two bodies in place and the next edit still has to be made twice.
Near-duplicate member pair (27 shared lines) src/traces.rs:156— src/traces.rs:156-226 | src/traces.rs:234-282 — These two members are variants of one another: 27 of their lines are already reported as duplicated blocks below, spread through both bodies rather than gathered into one. Read them as a single construct written twice. The repair is at the members' grain — factor the shared pipeline into one implementation the two call with their differences as parameters or as an injected step, or, where the difference is systematic (sync against async, one transport against another), generate one from the other. Extracting the individual blocks below is not the same fix: it leaves the two bodies in place and the next edit still has to be made twice.
D4 · Code Duplication· Members sharing a duplicated core (26 members, 50+ identical tokens) · ×1
Members sharing a duplicated core (26 members, 50+ identical tokens) src/log_server.rs:375— src/log_server.rs:375-396 | src/log_server.rs:398-418 | src/log_server.rs:422-439 | src/log_server.rs:441-460 | src/log_server.rs:462-481 | src/log_server.rs:485-509 | src/log_server.rs:513-537 | src/log_server.rs:539-555 | src/log_server.rs:569-586 | src/log_server.rs:588-610 | src/log_server.rs:615-634 | src/log_server.rs:754-769 | src/log_server.rs:799-814 | src/log_server.rs:830-869 | src/server.rs:275-296 | src/server.rs:298-318 | src/server.rs:322-339 | src/server.rs:341-360 | src/server.rs:362-381 | src/server.rs:383-407 | src/server.rs:411-435 | src/server.rs:437-453 | src/server.rs:467-483 | src/server.rs:485-507 | src/server.rs:509-529 | src/server.rs:534-553 — These 26 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 26 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 26 times.
D4 · Code Duplication· Edited copy of a member (104 corresponding lines) · ×1
Edited copy of a member (104 corresponding lines) src/deploy_setup.rs:283— src/deploy_setup.rs:283-396 | src/env_setup.rs:254-357 — These two members are one piece of code written twice and then edited apart: 104 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (143 corresponding lines) · ×1
Edited copy of a member (143 corresponding lines) src/ai_everruns.rs:168— src/ai_everruns.rs:168-328 | src/ai_everruns.rs:338-480 — These two members are one piece of code written twice and then edited apart: 143 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (144 corresponding lines) · ×1
Edited copy of a member (144 corresponding lines) src/ai.rs:13286— src/ai.rs:13286-13429 | src/ai.rs:13844-13990 — These two members are one piece of code written twice and then edited apart: 144 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (100 corresponding lines) · ×1
Edited copy of a member (100 corresponding lines) src/setup.rs:1517— src/setup.rs:1517-1616 | src/setup.rs:1621-1720 — These two members are one piece of code written twice and then edited apart: 100 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (77 corresponding lines) · ×1
Edited copy of a member (77 corresponding lines) src/explain_commits.rs:586— src/explain_commits.rs:586-674 | src/explain_commits.rs:682-758 — These two members are one piece of code written twice and then edited apart: 77 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (68 corresponding lines) · ×1
Edited copy of a member (68 corresponding lines) src/code.rs:273— src/code.rs:273-341 | src/code.rs:584-651 — These two members are one piece of code written twice and then edited apart: 68 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (65 corresponding lines) · ×1
Edited copy of a member (65 corresponding lines) src/ai.rs:4479— src/ai.rs:4479-4543 | src/ai.rs:5547-5632 — These two members are one piece of code written twice and then edited apart: 65 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copies of one member (3 members, 38+ corresponding lines) · ×1
Edited copies of one member (3 members, 38+ corresponding lines) src/server.rs:817— src/server.rs:817-854 | src/server.rs:860-897 | src/server.rs:903-942 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 38 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication· Edited copy of a member (97 corresponding lines) · ×1
Edited copy of a member (97 corresponding lines) src/codex_telemetry.rs:644— src/codex_telemetry.rs:644-740 | src/codex_telemetry.rs:742-840 — These two members are one piece of code written twice and then edited apart: 97 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (62 corresponding lines) · ×1
Edited copy of a member (62 corresponding lines) src/ai.rs:15220— src/ai.rs:15220-15281 | src/ai.rs:15284-15351 — These two members are one piece of code written twice and then edited apart: 62 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (44 corresponding lines) · ×1
Edited copy of a member (44 corresponding lines) src/commit.rs:15657— src/commit.rs:15657-15714 | src/commit.rs:15717-15760 — These two members are one piece of code written twice and then edited apart: 44 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copies of one member (4 members, 20+ corresponding lines) · ×1
Edited copies of one member (4 members, 20+ corresponding lines) src/ai.rs:6493— src/ai.rs:6493-6533 | src/ai_project_manifest.rs:170-189 | src/config.rs:2463-2484 | src/project_snapshot.rs:225-248 — These 4 members are one piece of code written 4 times and then edited apart: every two of them correspond over at least 20 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 4 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (6 members, 29+ corresponding lines) · ×1
Edited copies of one member (6 members, 29+ corresponding lines) src/agents.rs:494— src/agents.rs:494-532 | src/ai.rs:4094-4124 | src/code.rs:483-511 | src/deps.rs:713-744 | src/palette.rs:33-73 | src/repos.rs:320-349 — These 6 members are one piece of code written 6 times and then edited apart: every two of them correspond over at least 29 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 6 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (3 members, 35+ corresponding lines) · ×1
Edited copies of one member (3 members, 35+ corresponding lines) src/commit.rs:2865— src/commit.rs:2865-2900 | src/commit.rs:2902-2936 | src/commit.rs:11980-12017 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 35 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (3 members, 33+ corresponding lines) · ×1
Edited copies of one member (3 members, 33+ corresponding lines) src/env.rs:1428— src/env.rs:1428-1460 | src/env.rs:1598-1631 | src/env.rs:1641-1674 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 33 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (3 members, 22+ corresponding lines) · ×1
Edited copies of one member (3 members, 22+ corresponding lines) src/deploy_setup.rs:42— src/deploy_setup.rs:42-68 | src/env_setup.rs:39-64 | src/servers_tui.rs:28-49 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 22 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication· Edited copy of a member (49 corresponding lines) · ×1
Edited copy of a member (49 corresponding lines) src/commit.rs:2464— src/commit.rs:2464-2512 | src/commit.rs:2525-2574 — These two members are one piece of code written twice and then edited apart: 49 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copies of one member (4 members, 22+ corresponding lines) · ×1
Edited copies of one member (4 members, 22+ corresponding lines) src/commit.rs:12543— src/commit.rs:12543-12564 | src/commit.rs:12566-12588 | src/sync.rs:5444-5466 | src/sync.rs:5469-5492 — These 4 members are one piece of code written 4 times and then edited apart: every two of them correspond over at least 22 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 4 times and the copies will drift further apart.
D4 · Code Duplication· Edited copy of a member (36 corresponding lines) · ×1
Edited copy of a member (36 corresponding lines) src/codex_memory.rs:429— src/codex_memory.rs:429-483 | src/running.rs:47-82 — These two members are one piece of code written twice and then edited apart: 36 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (34 corresponding lines) · ×1
Edited copy of a member (34 corresponding lines) src/gitignore_policy.rs:550— src/gitignore_policy.rs:550-583 | src/gitignore_policy.rs:585-618 — These two members are one piece of code written twice and then edited apart: 34 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copies of one member (4 members, 25+ corresponding lines) · ×1
Edited copies of one member (4 members, 25+ corresponding lines) src/env.rs:314— src/env.rs:314-339 | src/env.rs:341-366 | src/env.rs:402-430 | src/env.rs:432-456 — These 4 members are one piece of code written 4 times and then edited apart: every two of them correspond over at least 25 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 4 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (3 members, 16+ corresponding lines) · ×1
Edited copies of one member (3 members, 16+ corresponding lines) src/ai.rs:9802— src/ai.rs:9802-9817 | src/ai.rs:9819-9835 | src/usage.rs:602-618 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 16 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (3 members, 15+ corresponding lines) · ×1
Edited copies of one member (3 members, 15+ corresponding lines) src/commit.rs:12298— src/commit.rs:12298-12317 | src/commit.rs:12319-12339 | src/push.rs:368-382 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 15 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (4 members, 15+ corresponding lines) · ×1
Edited copies of one member (4 members, 15+ corresponding lines) src/gitignore_policy.rs:372— src/gitignore_policy.rs:372-388 | src/push_hook.rs:172-186 | src/push_hook.rs:225-241 | src/ssh.rs:390-405 — These 4 members are one piece of code written 4 times and then edited apart: every two of them correspond over at least 15 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 4 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (4 members, 10+ corresponding lines) · ×1
Edited copies of one member (4 members, 10+ corresponding lines) src/commit.rs:10010— src/commit.rs:10010-10022 | src/commit.rs:13626-13638 | src/commit.rs:13640-13649 | src/pr_preview.rs:1633-1644 — These 4 members are one piece of code written 4 times and then edited apart: every two of them correspond over at least 10 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 4 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (5 members, 13+ corresponding lines) · ×1
Edited copies of one member (5 members, 13+ corresponding lines) src/base_tool.rs:24— src/base_tool.rs:24-36 | src/sync.rs:2619-2632 | src/sync.rs:5516-5530 | src/sync.rs:5542-5557 | src/upstream.rs:601-615 — These 5 members are one piece of code written 5 times and then edited apart: every two of them correspond over at least 13 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 5 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (4 members, 14+ corresponding lines) · ×1
Edited copies of one member (4 members, 14+ corresponding lines) src/changes.rs:66— src/changes.rs:66-80 | src/fix.rs:224-237 | src/push_hook.rs:210-223 | src/undo.rs:56-69 — These 4 members are one piece of code written 4 times and then edited apart: every two of them correspond over at least 14 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 4 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (4 members, 11+ corresponding lines) · ×1
Edited copies of one member (4 members, 11+ corresponding lines) src/commit.rs:12342— src/commit.rs:12342-12354 | src/commit.rs:12455-12468 | src/fix.rs:287-297 | src/git_guard.rs:385-395 — These 4 members are one piece of code written 4 times and then edited apart: every two of them correspond over at least 11 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 4 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (3 members, 20+ corresponding lines) · ×1
Edited copies of one member (3 members, 20+ corresponding lines) src/env.rs:272— src/env.rs:272-291 | src/env.rs:293-312 | src/env.rs:373-396 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 20 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (3 members, 18+ corresponding lines) · ×1
Edited copies of one member (3 members, 18+ corresponding lines) src/ai_taskd.rs:830— src/ai_taskd.rs:830-847 | src/ai_taskd.rs:854-871 | src/ai_tasks.rs:399-417 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 18 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (6 members, 9+ corresponding lines) · ×1
Edited copies of one member (6 members, 9+ corresponding lines) src/ai.rs:1154— src/ai.rs:1154-1162 | src/ai.rs:2332-2340 | src/ai.rs:2342-2355 | src/ai.rs:14460-14468 | src/ai.rs:16181-16189 | src/env.rs:196-204 — These 6 members are one piece of code written 6 times and then edited apart: every two of them correspond over at least 9 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 6 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (3 members, 10+ corresponding lines) · ×1
Edited copies of one member (3 members, 10+ corresponding lines) src/git_guard.rs:397— src/git_guard.rs:397-406 | src/jj.rs:3350-3359 | src/jj.rs:3530-3539 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 10 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (3 members, 6+ corresponding lines) · ×1
Edited copies of one member (3 members, 6+ corresponding lines) src/activity_log.rs:150— src/activity_log.rs:150-155 | src/activity_log.rs:157-164 | src/activity_log.rs:166-173 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 6 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (4 members, 9+ corresponding lines) · ×1
Edited copies of one member (4 members, 9+ corresponding lines) src/activity_log.rs:358— src/activity_log.rs:358-366 | src/fish_trace.rs:67-76 | src/fish_trace.rs:79-88 | src/skills.rs:86-94 — These 4 members are one piece of code written 4 times and then edited apart: every two of them correspond over at least 9 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 4 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (6 members, 11+ corresponding lines) · ×1
Edited copies of one member (6 members, 11+ corresponding lines) src/ai.rs:6215— src/ai.rs:6215-6225 | src/ai_project_manifest.rs:115-125 | src/ai_taskd.rs:1000-1010 | src/config.rs:2435-2445 | src/help_search.rs:176-186 | src/project_snapshot.rs:197-207 — These 6 members are one piece of code written 6 times and then edited apart: every two of them correspond over at least 11 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 6 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (4 members, 7+ corresponding lines) · ×1
Edited copies of one member (4 members, 7+ corresponding lines) src/commit.rs:14655— src/commit.rs:14655-14662 | src/log_server.rs:253-260 | src/start.rs:96-103 | src/web.rs:412-418 — These 4 members are one piece of code written 4 times and then edited apart: every two of them correspond over at least 7 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 4 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (3 members, 7+ corresponding lines) · ×1
Edited copies of one member (3 members, 7+ corresponding lines) src/ai.rs:10179— src/ai.rs:10179-10187 | src/ai_taskd.rs:972-978 | src/commit.rs:10323-10329 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 7 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
Duplicated block (115 lines × 2) src/ai_everruns.rs:208— src/ai_everruns.rs:208-322 | src/ai_everruns.rs:360-474 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai_everruns.rs:208` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/ai_everruns.rs:206` calls `Some`, `clone` and `src/ai_everruns.rs:359` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (80 lines × 2) src/setup.rs:1518— src/setup.rs:1518-1597 | src/setup.rs:1622-1701 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/setup.rs:1518` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (74–79 lines × 2) src/ask.rs:562— src/ask.rs:562-635 | src/task_match.rs:302-380 — before extracting anything, compare `src/ask.rs` and `src/task_match.rs` as WHOLE FILES: this scan already matched 7 separate duplicated blocks between them, totalling at least 166 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (66–72 lines × 3) src/ai.rs:3967— src/ai.rs:3967-4038 | src/ai.rs:13331-13397 | src/ai.rs:13889-13954 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:3967` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/ai.rs:13885` calls `Some`, `resolve_session_selection` and `src/ai.rs:3964` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (71 lines × 2) src/deploy_setup.rs:315— src/deploy_setup.rs:315-385 | src/env_setup.rs:276-346 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy_setup.rs:315` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. Note first that the copies are not typed on the same thing: the declarations holding them bind `app` to `&mut DeploySetupApp` in one and `&mut EnvSetupApp` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (62 lines × 2) src/sync_plan.rs:1242— src/sync_plan.rs:1242-1303 | src/updates.rs:1214-1275 — before extracting anything, compare `src/sync_plan.rs` and `src/updates.rs` as WHOLE FILES: this scan already matched 15 separate duplicated blocks between them, totalling at least 231 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/sync_plan.rs:1242` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note first that the copies are not typed on the same thing: the declarations holding them bind `summary` to `&SyncPlanLlmOutput` in one and `&UpdatesLlmOutput` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (58 lines × 2) src/deploy_setup.rs:622— src/deploy_setup.rs:622-679 | src/env_setup.rs:547-604 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (56 lines × 2) src/ai.rs:564— src/ai.rs:564-619 | src/ai.rs:812-867 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (61 lines × 2) src/commit.rs:6075— src/commit.rs:6075-6135 | src/commit.rs:6222-6282 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:6075` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (43–46 lines × 2) src/tasks.rs:2407— src/tasks.rs:2407-2452 | src/tasks.rs:2480-2522 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit. Note first that the copies are not typed on the same thing: the declarations holding them bind `cmd` to `&mut Command` in one and `&mut CommandBuilder` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (39–42 lines × 2) src/commit.rs:11570— src/commit.rs:11570-11611 | src/pr_edit.rs:576-614 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:11570` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (39–41 lines × 2) src/deploy_setup.rs:448— src/deploy_setup.rs:448-488 | src/env_setup.rs:386-424 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy_setup.rs:448` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately. Note first that the copies are not typed on the same thing: the declarations holding them bind `app` to `&DeploySetupApp` in one and `&EnvSetupApp` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (39–40 lines × 2) src/deploy_setup.rs:491— src/deploy_setup.rs:491-530 | src/env_setup.rs:426-464 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy_setup.rs:491` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note first that the copies are not typed on the same thing: the declarations holding them bind `app` to `&DeploySetupApp` in one and `&EnvSetupApp` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (30–40 lines × 2) src/sync_plan.rs:1147— src/sync_plan.rs:1147-1176 | src/updates.rs:981-1020 — before extracting anything, compare `src/sync_plan.rs` and `src/updates.rs` as WHOLE FILES: this scan already matched 15 separate duplicated blocks between them, totalling at least 231 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/sync_plan.rs:1147` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (32–38 lines × 2) src/ai.rs:1690— src/ai.rs:1690-1721 | src/ai.rs:1792-1829 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (35–37 lines × 3) src/ai.rs:15985— src/ai.rs:15985-16021 | src/ai.rs:16092-16126 | src/ai.rs:16136-16170 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:15985` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (36 lines × 3) src/publish.rs:937— src/publish.rs:937-972 | src/services.rs:523-558 | src/setup.rs:2982-3017 — before extracting anything, compare `src/services.rs` and `src/setup.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 70 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (44 lines × 2) src/env.rs:544— src/env.rs:544-587 | src/ssh_keys.rs:531-574 — before extracting anything, compare `src/env.rs` and `src/ssh_keys.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 70 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (34 lines × 2) src/commit.rs:2296— src/commit.rs:2296-2329 | src/commit.rs:4560-4593 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:2296` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (35 lines × 2) src/deploy.rs:3008— src/deploy.rs:3008-3042 | src/deploy.rs:3053-3087 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy.rs:3008` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (27–32 lines × 2) src/ask.rs:654— src/ask.rs:654-680 | src/task_match.rs:430-461 — before extracting anything, compare `src/ask.rs` and `src/task_match.rs` as WHOLE FILES: this scan already matched 7 separate duplicated blocks between them, totalling at least 166 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/task_match.rs:430` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (44–47 lines × 2) src/sync.rs:5570— src/sync.rs:5570-5616 | src/sync.rs:5652-5695 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (28–30 lines × 4) src/deploy_setup.rs:922— src/deploy_setup.rs:922-949 | src/deploy_setup.rs:975-1002 | src/discover.rs:158-187 | src/env_setup.rs:835-862 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy_setup.rs:922` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (28–30 lines × 2) src/ai.rs:15243— src/ai.rs:15243-15270 | src/ai.rs:15304-15333 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:15243` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (29 lines × 2) src/commit.rs:5952— src/commit.rs:5952-5980 | src/commit.rs:6144-6172 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:5952` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (27–28 lines × 2) src/codex_memory.rs:1030— src/codex_memory.rs:1030-1056 | src/codex_memory.rs:1423-1450 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/codex_memory.rs:1030` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (27 lines × 2) src/ai.rs:1739— src/ai.rs:1739-1765 | src/ai.rs:15932-15958 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:1739` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (23–27 lines × 2) src/ai.rs:8067— src/ai.rs:8067-8093 | src/ai.rs:8135-8157 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:8067` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (26–27 lines × 2) src/sync.rs:1851— src/sync.rs:1851-1877 | src/sync.rs:3810-3835 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/sync.rs:1851` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (23–26 lines × 2) src/ai.rs:13846— src/ai.rs:13846-13871 | src/ai.rs:14000-14022 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (25–26 lines × 2) src/ai.rs:14156— src/ai.rs:14156-14181 | src/failure.rs:746-770 — before extracting anything, compare `src/ai.rs` and `src/failure.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 58 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:14156` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (24–25 lines × 3) src/commit.rs:2107— src/commit.rs:2107-2130 | src/commit.rs:2281-2304 | src/commit.rs:4544-4568 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:2107` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (24 lines × 3) src/setup.rs:1590— src/setup.rs:1590-1613 | src/setup.rs:1694-1717 | src/setup.rs:1787-1810 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited.
Duplicated block (19–24 lines × 2) src/upstream.rs:263— src/upstream.rs:263-286 | src/upstream.rs:382-400 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (21–23 lines × 2) src/commit.rs:7452— src/commit.rs:7452-7474 | src/sync.rs:3109-3129 — before extracting anything, compare `src/commit.rs` and `src/sync.rs` as WHOLE FILES: this scan already matched 13 separate duplicated blocks between them, totalling at least 152 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:7452` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (21–22 lines × 4) src/ai.rs:14171— src/ai.rs:14171-14192 | src/commit.rs:7465-7485 | src/failure.rs:761-781 | src/sync.rs:3120-3140 — before extracting anything, compare `src/ai.rs` and `src/commit.rs` as WHOLE FILES: this scan already matched 5 separate duplicated blocks between them, totalling at least 61 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:14171` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (18–22 lines × 2) src/commit.rs:12409— src/commit.rs:12409-12426 | src/commit.rs:12432-12453 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:12409` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (21 lines × 3) src/ai.rs:1552— src/ai.rs:1552-1572 | src/ai.rs:1756-1776 | src/ai.rs:15949-15969 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:1552` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (20–21 lines × 2) src/sync.rs:2013— src/sync.rs:2013-2033 | src/sync.rs:2264-2283 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/sync.rs:2013` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (38–39 lines × 2) src/workflow.rs:542— src/workflow.rs:542-580 | src/workflow.rs:662-699 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/workflow.rs:542` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (17–20 lines × 2) src/sync.rs:5771— src/sync.rs:5771-5787 | src/upstream.rs:621-640 — before extracting anything, compare `src/sync.rs` and `src/upstream.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 50 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (18–19 lines × 3) src/ai.rs:1771— src/ai.rs:1771-1789 | src/ai.rs:2037-2054 | src/ai.rs:15964-15982 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:1771` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (15–17 lines × 8) src/agents.rs:395— src/agents.rs:395-411 | src/agents.rs:501-515 | src/ai.rs:4100-4114 | src/code.rs:488-502 | src/commits.rs:293-308 | src/deps.rs:721-735 | src/palette.rs:40-54 | src/repos.rs:325-339 — before extracting anything, compare `src/agents.rs` and `src/palette.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 33 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/agents.rs:395` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately. Note first that the copies are not typed on the same thing: the declarations holding them bind `entries` to `&[FzfSessionEntry]` in one and `&[CodeEntry]` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (15–17 lines × 3) src/log_server.rs:782— src/log_server.rs:782-796 | src/log_server.rs:885-899 | src/log_server.rs:917-933 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/log_server.rs:782` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (21–24 lines × 2) src/commit.rs:5513— src/commit.rs:5513-5536 | src/commit.rs:5750-5770 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:5513` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (16–17 lines × 2) src/commits.rs:65— src/commits.rs:65-81 | src/commits.rs:99-114 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commits.rs:65` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (15–17 lines × 2) src/daemon.rs:221— src/daemon.rs:221-237 | src/supervisor.rs:1206-1220 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/daemon.rs:221` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (16 lines × 3) src/ai.rs:2914— src/ai.rs:2914-2929 | src/ai.rs:2971-2986 | src/ai.rs:3410-3425 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:2914` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (15 lines × 4) src/commit.rs:2154— src/commit.rs:2154-2168 | src/commit.rs:2324-2338 | src/commit.rs:7840-7854 | src/commit.rs:9363-9377 — all 4 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:2154` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12–15 lines × 3) src/ai.rs:1698— src/ai.rs:1698-1709 | src/ai.rs:1802-1815 | src/ai.rs:1893-1907 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:1698` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (14–15 lines × 3) src/ask.rs:638— src/ask.rs:638-651 | src/task_match.rs:383-396 | src/tasks.rs:1968-1982 — before extracting anything, compare `src/ask.rs` and `src/task_match.rs` as WHOLE FILES: this scan already matched 7 separate duplicated blocks between them, totalling at least 166 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (13–15 lines × 2) src/ai.rs:3010— src/ai.rs:3010-3022 | src/ai.rs:3068-3082 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:3010` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (3–15 lines × 3) src/archive.rs:111— src/archive.rs:111-113 | src/code.rs:851-865 | src/ext.rs:196-210 — before extracting anything, compare `src/archive.rs` and `src/code.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 37 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/archive.rs:111` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (3–14 lines × 5) src/commit.rs:5330— src/commit.rs:5330-5332 | src/commit.rs:5881-5894 | src/commit.rs:6083-6095 | src/commit.rs:6230-6242 | src/commit.rs:6521-6534 — all 5 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:5330` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/commit.rs:5880` calls `Some`, `clone` and `src/commit.rs:5330` does not — after which the two agree again for 4 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (13–14 lines × 3) src/jd.rs:533— src/jd.rs:533-546 | src/jd.rs:551-563 | src/jd.rs:576-589 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/jd.rs:533` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/jd.rs:532` calls `as_deref` and `src/jd.rs:575` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (13–14 lines × 2) src/commit.rs:5104— src/commit.rs:5104-5117 | src/skills.rs:1158-1170 — before extracting anything, compare `src/commit.rs` and `src/skills.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 58 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place.
Duplicated block (12–14 lines × 2) src/env.rs:2295— src/env.rs:2295-2306 | src/env.rs:2349-2362 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/env.rs:2349` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (13 lines × 4) src/ai.rs:1556— src/ai.rs:1556-1568 | src/ai.rs:1760-1772 | src/ai.rs:14096-14108 | src/ai.rs:15953-15965 — all 4 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:1556` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/ai.rs:1569` calls `clone` and `src/ai.rs:14109` does not — after which the two agree again for 3 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (11–13 lines × 3) src/ai.rs:4569— src/ai.rs:4569-4581 | src/ai_project_manifest.rs:225-235 | src/codex_session_docs.rs:1763-1773 — before extracting anything, compare `src/ai.rs` and `src/codex_session_docs.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 34 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:4569` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (20 lines × 3) src/server.rs:835— src/server.rs:835-854 | src/server.rs:878-897 | src/server.rs:923-942 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/server.rs:835` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (11–12 lines × 3) src/commit.rs:13324— src/commit.rs:13324-13335 | src/commit.rs:13406-13416 | src/commit.rs:13680-13690 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (2–12 lines × 3) src/deploy_setup.rs:953— src/deploy_setup.rs:953-954 | src/deploy_setup.rs:1007-1018 | src/env_setup.rs:867-878 — before extracting anything, compare `src/deploy_setup.rs` and `src/env_setup.rs` as WHOLE FILES: this scan already matched 26 separate duplicated blocks between them, totalling at least 537 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/deploy_setup.rs:953` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/deploy_setup.rs:1007` calls `Some`, `path`, `file_name` and `src/deploy_setup.rs:953` does not — after which the two agree again for 5 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (10–12 lines × 2) src/push.rs:309— src/push.rs:309-318 | src/sync.rs:5357-5368 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (10–11 lines × 4) src/ai.rs:4568— src/ai.rs:4568-4578 | src/ai.rs:12748-12757 | src/ai_project_manifest.rs:224-233 | src/codex_session_docs.rs:1762-1771 — before extracting anything, compare `src/ai.rs` and `src/codex_session_docs.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 34 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/ai.rs:4568` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (10–11 lines × 3) src/commit.rs:7447— src/commit.rs:7447-7457 | src/failure.rs:741-751 | src/sync.rs:3104-3113 — before extracting anything, compare `src/commit.rs` and `src/failure.rs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 58 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:7447` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (19–20 lines × 2) src/commit.rs:5995— src/commit.rs:5995-6013 | src/commit.rs:12256-12275 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:5995` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9–11 lines × 2) src/commit.rs:11550— src/commit.rs:11550-11560 | src/repos.rs:102-110 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:11550` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately. Note first that the copies are not typed on the same thing: the declarations holding them bind `path` to `&Path` in one and `&std::path::Path` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (8–11 lines × 2) src/failure.rs:577— src/failure.rs:577-587 | src/failure.rs:630-637 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/failure.rs:577` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (10 lines × 6) src/commit.rs:928— src/commit.rs:928-937 | src/commit.rs:940-949 | src/commit.rs:952-961 | src/commit.rs:1207-1216 | src/commit.rs:1219-1228 | src/commit.rs:1231-1240 — all 6 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/commit.rs:928` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (16–17 lines × 3) src/sync_plan.rs:1621— src/sync_plan.rs:1621-1637 | src/sync_plan.rs:1725-1741 | src/updates.rs:1455-1470 — before extracting anything, compare `src/sync_plan.rs` and `src/updates.rs` as WHOLE FILES: this scan already matched 15 separate duplicated blocks between them, totalling at least 231 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit. Note first that the copies are not typed on the same thing: the declarations holding them bind `index` to `&SyncPlanIndex` in one and `&UpdatesIndex` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (9 lines × 20) src/log_server.rs:383— src/log_server.rs:383-391 | src/log_server.rs:405-413 | src/log_server.rs:426-434 | src/log_server.rs:447-455 | src/log_server.rs:468-476 | src/log_server.rs:542-550 | src/log_server.rs:573-581 | src/log_server.rs:597-605 | src/log_server.rs:621-629 | src/log_server.rs:801-809 | src/server.rs:283-291 | src/server.rs:305-313 | src/server.rs:326-334 | src/server.rs:347-355 | src/server.rs:368-376 | src/server.rs:440-448 | src/server.rs:470-478 | src/server.rs:494-502 | src/server.rs:516-524 | src/server.rs:540-548 — before extracting anything, compare `src/log_server.rs` and `src/server.rs` as WHOLE FILES: this scan already matched 18 separate duplicated blocks between them, totalling at least 276 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/log_server.rs:383` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9 lines × 9) src/env.rs:1449— src/env.rs:1449-1457 | src/env.rs:1483-1491 | src/env.rs:1534-1542 | src/env.rs:1573-1581 | src/env.rs:1619-1627 | src/env.rs:1663-1671 | src/env.rs:1791-1799 | src/env.rs:2542-2550 | src/env.rs:4046-4054 — all 9 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/env.rs:1445` calls `status`, `Ok` and `src/env.rs:1617` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (8 lines × 9) src/agents.rs:228— src/agents.rs:228-235 | src/agents.rs:394-401 | src/agents.rs:500-507 | src/ai.rs:4099-4106 | src/code.rs:487-494 | src/commits.rs:292-299 | src/deps.rs:720-727 | src/palette.rs:39-46 | src/repos.rs:324-331 — before extracting anything, compare `src/agents.rs` and `src/palette.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 33 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/agents.rs:228` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note first that the copies are not typed on the same thing: the declarations holding them bind `entries` to `&[FzfSessionEntry]` in one and `&[CodeEntry]` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (7–8 lines × 4) src/jj.rs:3397— src/jj.rs:3397-3403 | src/sync_plan.rs:1758-1764 | src/updates.rs:1487-1494 | src/updates.rs:1502-1508 — before extracting anything, compare `src/sync_plan.rs` and `src/updates.rs` as WHOLE FILES: this scan already matched 15 separate duplicated blocks between them, totalling at least 231 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/jj.rs:3397` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (7 lines × 26) src/log_server.rs:385— src/log_server.rs:385-391 | src/log_server.rs:407-413 | src/log_server.rs:428-434 | src/log_server.rs:449-455 | src/log_server.rs:470-476 | src/log_server.rs:498-504 | src/log_server.rs:526-532 | src/log_server.rs:544-550 | src/log_server.rs:575-581 | src/log_server.rs:599-605 | src/log_server.rs:623-629 | src/log_server.rs:758-764 | src/log_server.rs:803-809 | src/log_server.rs:856-864 | src/server.rs:285-291 | src/server.rs:307-313 | src/server.rs:328-334 | src/server.rs:349-355 | src/server.rs:370-376 | src/server.rs:396-402 | src/server.rs:424-430 | src/server.rs:442-448 | src/server.rs:472-478 | src/server.rs:496-502 | src/server.rs:518-524 | src/server.rs:542-548 — before extracting anything, compare `src/log_server.rs` and `src/server.rs` as WHOLE FILES: this scan already matched 18 separate duplicated blocks between them, totalling at least 276 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/log_server.rs:385` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (7 lines × 4) src/deploy.rs:657— src/deploy.rs:657-663 | src/fish_install.rs:89-95 | src/push_hook.rs:96-102 | src/setup.rs:1233-1239 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from all 4 call sites, so a change lands once. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/deploy.rs:654` calls `join` and `src/fish_install.rs:84` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (6–7 lines × 3) src/env.rs:2340— src/env.rs:2340-2346 | src/env.rs:2525-2530 | src/env.rs:3484-3490 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/env.rs:2340` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (6 lines × 6) src/explain_commits.rs:109— src/explain_commits.rs:109-115 | src/fix.rs:280-285 | src/jj.rs:3402-3407 | src/sync_plan.rs:1763-1768 | src/updates.rs:1493-1499 | src/upstream.rs:592-598 — before extracting anything, compare `src/sync_plan.rs` and `src/updates.rs` as WHOLE FILES: this scan already matched 15 separate duplicated blocks between them, totalling at least 231 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/explain_commits.rs:109` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (4–6 lines × 3) src/updates.rs:676— src/updates.rs:676-679 | src/updates.rs:809-814 | src/updates.rs:887-892 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/updates.rs:809` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/updates.rs:808` calls `to_string` and `src/updates.rs:886` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (5 lines × 5) src/branches.rs:367— src/branches.rs:367-371 | src/ext.rs:402-406 | src/publish.rs:722-726 | src/push.rs:352-356 | src/repos.rs:1517-1521 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from all 5 call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/branches.rs:367` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/publish.rs:721` calls `current_dir` and `src/branches.rs:366` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (8 lines × 6) src/env.rs:1484— src/env.rs:1484-1491 | src/env.rs:1535-1542 | src/env.rs:1574-1581 | src/env.rs:3271-3278 | src/env.rs:3995-4002 | src/env.rs:4047-4054 — all 6 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/env.rs:1484` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/env.rs:4058` calls `is_empty` and `src/env.rs:4006` does not — after which the two agree again for 3 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (6 lines × 7) src/explain_commits.rs:109— src/explain_commits.rs:109-115 | src/fix.rs:280-285 | src/jj.rs:3402-3407 | src/jj.rs:3416-3421 | src/sync_plan.rs:1763-1768 | src/updates.rs:1493-1499 | src/upstream.rs:592-598 — before extracting anything, compare `src/sync_plan.rs` and `src/updates.rs` as WHOLE FILES: this scan already matched 15 separate duplicated blocks between them, totalling at least 231 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/explain_commits.rs:109` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8–10 lines × 2) scripts/ai-taskd-launchd.py:116— scripts/ai-taskd-launchd.py:116-123 | scripts/codex-skill-eval-launchd.py:165-174 — before extracting anything, compare `scripts/ai-taskd-launchd.py` and `scripts/codex-skill-eval-launchd.py` as WHOLE FILES: this scan already matched 6 separate duplicated blocks between them, totalling at least 59 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `scripts/codex-skill-eval-launchd.py:165` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Low cohesion: RpcRequest (LCOM4 4) crates/seq_client/src/lib.rs:26— RpcRequest's methods fall into 4 groups that share no field and call none of each other, against a bar of more than 3 for this run (LCOM4, configurable — your repository's bar is the one quoted here). Each group is a set of methods reachable from one another through shared fields or direct calls, so 4 groups means the type has that many internally-connected clusters with nothing tying them together. Types whose shape makes a high count expected — and which would otherwise dominate this list — are excluded before this row is raised, so this is a genuine split candidate rather than a metric reading. It is still a shape, not a defect: confirm the groups match responsibilities you can name before splitting.
Orphaned file src/cli.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/env.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/config.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/tasks.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/jj.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/setup.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/deploy.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/codex_session_docs.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/pr_preview.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/codex_memory.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/repos.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/sync_plan.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/code.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/updates.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/url_inspect.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/skills.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/deps.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/codex_runtime.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/main.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/flow_config.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/ai_everruns.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/server.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/supervisor.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/workflow.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file src/agents.rs:1— No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Interpolated log message defeats structured logging src/ai.rs:3063— `debug!` at line 3063 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:1844— `debug!` at line 1844 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:1857— `debug!` at line 1857 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:1906— `debug!` at line 1906 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:1920— `debug!` at line 1920 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:1952— `debug!` at line 1952 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:1966— `debug!` at line 1966 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:4316— `debug!` at line 4316 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:5862— `debug!` at line 5862 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:5867— `debug!` at line 5867 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:6779— `debug!` at line 6779 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:6844— `debug!` at line 6844 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:7195— `debug!` at line 7195 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:7269— `debug!` at line 7269 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:7969— `debug!` at line 7969 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:13738— `debug!` at line 13738 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:13913— `debug!` at line 13913 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:14023— `debug!` at line 14023 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:14026— `debug!` at line 14026 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:14186— `debug!` at line 14186 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:14189— `debug!` at line 14189 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:14216— `debug!` at line 14216 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:14476— `debug!` at line 14476 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:14520— `debug!` at line 14520 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging src/commit.rs:14591— `debug!` at line 14591 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Duplicated predicate scripts/bench-ai-runtime.py:81— `candidate.exists() and os.access(candidate, os.X_OK)` appears character-identically in 2 files — scripts/bench-ai-runtime.py, scripts/bench-cli-startup.py. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate scripts/codex_fork.py:91— `probe.returncode != 0 or probe.stdout.strip() != "true"` appears character-identically in 2 files — scripts/codex_fork.py, scripts/codex_j.py. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/commit.rs:15747— `!content.is_empty() && !content.ends_with('\n')` appears character-identically in 2 files — src/commit.rs, src/setup.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate crates/seq_everruns_bridge/src/maple.rs:458— `!csv_endpoints.is_empty() || !csv_keys.is_empty()` appears character-identically in 2 files — crates/seq_everruns_bridge/src/maple.rs, src/codex_telemetry.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/ask.rs:228— `!io::stdin().is_terminal() || !io::stdout().is_terminal()` appears character-identically in 3 files — src/ask.rs, src/opentui_prompt.rs, src/usage.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/commit.rs:3314— `!line.starts_with('+') || line.starts_with("+++")` appears character-identically in 2 files — src/commit.rs, src/invariants.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/ai_tasks.rs:774— `(bytes[0] == b'"' && bytes[trimmed.len() - 1] == b'"') || (bytes[0] == b'\'' && bytes[trimmed.len() - 1] == b'\'')` appears character-identically in 2 files — src/ai_tasks.rs, src/recipe.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/deploy_setup.rs:764— `app.env_file_path().is_some() && !app.key_items.is_empty()` appears character-identically in 2 files — src/deploy_setup.rs, src/env_setup.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/commit.rs:12508— `args == ["rev-parse", "--show-toplevel"] || args == ["rev-parse", "--git-dir"] || (args.len() == 3 && args[0] == "remote" && args[1] == "get…` appears character-identically in 2 files — src/commit.rs, src/sync.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/ai.rs:11834— `cfg!(target_os = "macos") || !command_on_path("cursor")` appears character-identically in 2 files — src/ai.rs, src/commit.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/commit.rs:8373— `ch.is_ascii_alphanumeric() || ch == '-' || ch == '_'` appears character-identically in 5 files — src/commit.rs, src/daemon.rs, src/processes.rs, src/sync_plan.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/changes.rs:708— `ch.is_ascii_alphanumeric() || ch == '-' || ch == '_' || ch == '.'` appears character-identically in 4 files — src/changes.rs, src/commit.rs, src/env.rs, src/sync.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/ai_project_manifest.rs:159— `current.is_dir == self.is_dir && current.len == self.len && current.modified_sec == self.modified_sec && current.modified_nsec == self.modif…` appears character-identically in 2 files — src/ai_project_manifest.rs, src/project_snapshot.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/jd.rs:647— `end > start && bytes[end - 1].is_ascii_whitespace()` appears character-identically in 2 files — src/jd.rs, src/supervisor.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/git_guard.rs:324— `git_dir.join("rebase-merge").exists() || git_dir.join("rebase-apply").exists()` appears character-identically in 2 files — src/git_guard.rs, src/jj.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/ai.rs:4049— `io::stdin().is_terminal() && io::stdout().is_terminal()` appears character-identically in 2 files — src/ai.rs, src/usage.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/reviews_todo.rs:182— `item.id == id || item.id.starts_with(id)` appears character-identically in 2 files — src/reviews_todo.rs, src/todo.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/deploy.rs:3103— `line.is_empty() || line.starts_with('#')` appears character-identically in 5 files — src/deploy.rs, src/env.rs, src/recipe.rs, src/storage.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/info.rs:165— `line.starts_with('[') && line.ends_with(']')` appears character-identically in 2 files — src/info.rs, src/repo_capsule.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/commit.rs:13548— `lower.contains("bug") || lower.contains("error handling") || lower.contains("panic") || lower.contains("unwrap") || lower.contains("missing …` appears character-identically in 2 files — src/commit.rs, src/todo.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/deploy_setup.rs:903— `lowered.contains("example.com") || lowered.contains("example")` appears character-identically in 2 files — src/deploy_setup.rs, src/env_setup.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/deploy_setup.rs:900— `lowered.contains("localhost") || lowered.contains("127.0.0.1")` appears character-identically in 2 files — src/deploy_setup.rs, src/env_setup.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/deploy_setup.rs:897— `lowered.contains("sk_test") || lowered.contains("pk_test")` appears character-identically in 2 files — src/deploy_setup.rs, src/env_setup.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/home.rs:65— `matches!(mode, ssh::SshMode::Force) && !ssh::has_identities()` appears character-identically in 2 files — src/home.rs, src/repos.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate src/lifecycle.rs:294— `msg.contains("task '") && msg.contains("not found")` appears character-identically in 2 files — src/lifecycle.rs, src/main.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Silent fallback default on Err crates/seq_everruns_bridge/src/lib.rs:301— `unix_time_nanos_now` turns every `Err` into `0` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/ai.rs:6300— `codex_query_cache_entry_count` turns every `Err` into `0` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/ai.rs:14253— `format_relative_time` turns every `Err` into `"unknown".to_string()` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/ai_everruns.rs:1213— `unix_time_nanos_now` turns every `Err` into `0` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/commit.rs:254— `check_sensitive_files` turns every `Err` into `Vec::new()` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/commit.rs:551— `check_large_diffs` turns every `Err` into `Vec::new()` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/commit.rs:1596— `rise_url` turns every `Err` into `"http://localhost:7654/v1/chat/completions".to_string()` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/commit.rs:3639— `find_non_bun_test_tasks` turns every `Err` into `Vec::new()` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/commit.rs:6621— `internal_staged_paths` turns every `Err` into `Vec::new()` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/commit.rs:6706— `unwanted_staged_paths` turns every `Err` into `Vec::new()` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/commit.rs:6999— `resolve_review_files` turns every `Err` into `Vec::new()` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/features.rs:90— `scan_features` turns every `Err` into `Vec::new()` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/features.rs:204— `features_context_for_review` turns every `Err` into `String::new()` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/git_guard.rs:381— `git_unmerged_files` turns every `Err` into `Vec::new()` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/info.rs:152— `parse_git_remotes` turns every `Err` into `Vec::new()` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/jj.rs:3567— `git_unmerged_files` turns every `Err` into `Vec::new()` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/log_server.rs:962— `logs_errors_stream` turns every `Err` into `Vec::new()` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/proxy/mod.rs:123— `parse_size` turns every `Err` into `0` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/repo_capsule.rs:583— `read_flow_task_names` turns every `Err` into `Vec::new()` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/repo_capsule.rs:603— `read_package_scripts` turns every `Err` into `Vec::new()` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/rl_signals.rs:250— `now_unix_ms` turns every `Err` into `0` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err src/setup.rs:2006— `cargo_bin_names` turns every `Err` into `Vec::new()` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
Silent fallback default on Err crates/flow_commit_scan/src/lib.rs:204— `scan_diff_for_secrets` turns every `Err` into `Vec::new()` — a failure becomes a plausible value and a silent behavior change with no trail. Log the error or propagate it with `?`. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the arm or in the doc comment, and the row stops firing.
README/code drift docs/commands/readme.md:32— docs/commands/readme.md links to `daemon.md`, but `docs/commands/daemon.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/commands/readme.md:33— docs/commands/readme.md links to `parallel.md`, but `docs/commands/parallel.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/commands/readme.md:64— docs/commands/readme.md links to `fixup.md`, but `docs/commands/fixup.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/commands/readme.md:75— docs/commands/readme.md links to `run.md`, but `docs/commands/run.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/commands/readme.md:77— docs/commands/readme.md links to `rerun.md`, but `docs/commands/rerun.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/commands/readme.md:78— docs/commands/readme.md links to `search.md`, but `docs/commands/search.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/commands/readme.md:82— docs/commands/readme.md links to `ps.md`, but `docs/commands/ps.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/commands/readme.md:83— docs/commands/readme.md links to `kill.md`, but `docs/commands/kill.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/commands/readme.md:84— docs/commands/readme.md links to `logs.md`, but `docs/commands/logs.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/commands/readme.md:91— docs/commands/readme.md links to `agent.md`, but `docs/commands/agent.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/commands/readme.md:92— docs/commands/readme.md links to `match.md`, but `docs/commands/match.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/commands/readme.md:93— docs/commands/readme.md links to `sessions.md`, but `docs/commands/sessions.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/commands/readme.md:102— docs/commands/readme.md links to `init.md`, but `docs/commands/init.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/commands/readme.md:103— docs/commands/readme.md links to `doctor.md`, but `docs/commands/doctor.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/commands/readme.md:108— docs/commands/readme.md links to `projects.md`, but `docs/commands/projects.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/commands/readme.md:109— docs/commands/readme.md links to `active.md`, but `docs/commands/active.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/commands/readme.md:110— docs/commands/readme.md links to `hub.md`, but `docs/commands/hub.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/commands/readme.md:126— docs/commands/readme.md links to `tools.md`, but `docs/commands/tools.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/commands/readme.md:127— docs/commands/readme.md links to `notify.md`, but `docs/commands/notify.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/commands/readme.md:128— docs/commands/readme.md links to `server.md`, but `docs/commands/server.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
README/code drift docs/commands/readme.md:139— docs/commands/readme.md links to `../flow-toml.md`, but `docs/flow-toml.md` does not exist. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong.
Subsumed condition operand src/codex_memory.rs:2241— `snippet.contains("pub name: String,")` can never decide this `||` — every value satisfying `snippet.contains("pub name: String,")` also satisfies `snippet.contains("pub name: String")`, so the `||` chain is already decided by the latter. The expression is equivalent to the chain without it, which means it is wider than it reads. Delete the dead operand, or narrow the surviving one if IT is the accident.
Subsumed condition operand src/commit.rs:3824— `m.contains("documentation")` can never decide this `||` — every value satisfying `m.contains("documentation")` also satisfies `m.contains("doc")`, so the `||` chain is already decided by the latter. The expression is equivalent to the chain without it, which means it is wider than it reads. Delete the dead operand, or narrow the surviving one if IT is the accident.
Subsumed condition operand src/commit.rs:5527— `lowered.contains("performance issue")` can never decide this `||` — every value satisfying `lowered.contains("performance issue")` also satisfies `lowered.contains("issue")`, so the `||` chain is already decided by the latter. The expression is equivalent to the chain without it, which means it is wider than it reads. Delete the dead operand, or narrow the surviving one if IT is the accident.
Subsumed condition operand src/commit.rs:5761— `lowered.contains("performance issue")` can never decide this `||` — every value satisfying `lowered.contains("performance issue")` also satisfies `lowered.contains("issue")`, so the `||` chain is already decided by the latter. The expression is equivalent to the chain without it, which means it is wider than it reads. Delete the dead operand, or narrow the surviving one if IT is the accident.
Subsumed condition operand src/commit.rs:5891— `lowered.contains("performance issue")` can never decide this `||` — every value satisfying `lowered.contains("performance issue")` also satisfies `lowered.contains("issue")`, so the `||` chain is already decided by the latter. The expression is equivalent to the chain without it, which means it is wider than it reads. Delete the dead operand, or narrow the surviving one if IT is the accident.
Subsumed condition operand src/commit.rs:6092— `lowered.contains("performance issue")` can never decide this `||` — every value satisfying `lowered.contains("performance issue")` also satisfies `lowered.contains("issue")`, so the `||` chain is already decided by the latter. The expression is equivalent to the chain without it, which means it is wider than it reads. Delete the dead operand, or narrow the surviving one if IT is the accident.
Subsumed condition operand src/commit.rs:6239— `lowered.contains("performance issue")` can never decide this `||` — every value satisfying `lowered.contains("performance issue")` also satisfies `lowered.contains("issue")`, so the `||` chain is already decided by the latter. The expression is equivalent to the chain without it, which means it is wider than it reads. Delete the dead operand, or narrow the surviving one if IT is the accident.
Subsumed condition operand src/commit.rs:6531— `lowered.contains("performance issue")` can never decide this `||` — every value satisfying `lowered.contains("performance issue")` also satisfies `lowered.contains("issue")`, so the `||` chain is already decided by the latter. The expression is equivalent to the chain without it, which means it is wider than it reads. Delete the dead operand, or narrow the surviving one if IT is the accident.
Subsumed condition operand src/commit.rs:13574— `lower.contains("issues.external_ref")` can never decide this `||` — every value satisfying `lower.contains("issues.external_ref")` also satisfies `lower.contains("external_ref")`, so the `||` chain is already decided by the latter. The expression is equivalent to the chain without it, which means it is wider than it reads. Delete the dead operand, or narrow the surviving one if IT is the accident.
Subsumed condition operand src/deploy_setup.rs:903— `lowered.contains("example.com")` can never decide this `||` — every value satisfying `lowered.contains("example.com")` also satisfies `lowered.contains("example")`, so the `||` chain is already decided by the latter. The expression is equivalent to the chain without it, which means it is wider than it reads. Delete the dead operand, or narrow the surviving one if IT is the accident.
Subsumed condition operand src/env_setup.rs:802— `lowered.contains("example.com")` can never decide this `||` — every value satisfying `lowered.contains("example.com")` also satisfies `lowered.contains("example")`, so the `||` chain is already decided by the latter. The expression is equivalent to the chain without it, which means it is wider than it reads. Delete the dead operand, or narrow the surviving one if IT is the accident.
Subsumed condition operand src/env_setup.rs:820— `name.contains("development")` can never decide this `||` — every value satisfying `name.contains("development")` also satisfies `name.contains("dev")`, so the `||` chain is already decided by the latter. The expression is equivalent to the chain without it, which means it is wider than it reads. Delete the dead operand, or narrow the surviving one if IT is the accident.
Subsumed condition operand src/env_setup.rs:823— `name.contains("production")` can never decide this `||` — every value satisfying `name.contains("production")` also satisfies `name.contains("prod")`, so the `||` chain is already decided by the latter. The expression is equivalent to the chain without it, which means it is wider than it reads. Delete the dead operand, or narrow the surviving one if IT is the accident.
Subsumed condition operand src/jj.rs:3520— `lowered.contains("untrack")` can never decide this `||` — every value satisfying `lowered.contains("untrack")` also satisfies `lowered.contains("track")`, so the `||` chain is already decided by the latter. The expression is equivalent to the chain without it, which means it is wider than it reads. Delete the dead operand, or narrow the surviving one if IT is the accident.
Subsumed condition operand src/repo_capsule.rs:523— `manifests_set.contains("bun.lockb")` can never decide this `||` — every value satisfying `manifests_set.contains("bun.lockb")` also satisfies `manifests_set.contains("bun.lock")`, so the `||` chain is already decided by the latter. The expression is equivalent to the chain without it, which means it is wider than it reads. Delete the dead operand, or narrow the surviving one if IT is the accident.
Subsumed condition operand src/setup.rs:2385— `scripts_str.contains("pnpm run")` can never decide this `||` — every value satisfying `scripts_str.contains("pnpm run")` also satisfies `scripts_str.contains("pnpm ")`, so the `||` chain is already decided by the latter. The expression is equivalent to the chain without it, which means it is wider than it reads. Delete the dead operand, or narrow the surviving one if IT is the accident.
Subsumed condition operand src/setup.rs:2388— `scripts_str.contains("bun run")` can never decide this `||` — every value satisfying `scripts_str.contains("bun run")` also satisfies `scripts_str.contains("bun ")`, so the `||` chain is already decided by the latter. The expression is equivalent to the chain without it, which means it is wider than it reads. Delete the dead operand, or narrow the surviving one if IT is the accident.
Subsumed condition operand src/proxy/summary.rs:402— `body.contains("unauthorized")` can never decide this `||` — every value satisfying `body.contains("unauthorized")` also satisfies `body.contains("auth")`, so the `||` chain is already decided by the latter. The expression is equivalent to the chain without it, which means it is wider than it reads. Delete the dead operand, or narrow the surviving one if IT is the accident.
D34 · Knowledge Freshness· Most significant orphaned file · ×3
Most significant orphaned file src/ai.rs:1— One of the orphaned files carrying the most lost knowledge — ranked by size weighted by the file's role in the codebase, the same weighting behind the score above, so core code outranks equally large plumbing. A reasonable place to start a read-through before the aggregate risk above bites.
Most significant orphaned file src/commit.rs:1— One of the orphaned files carrying the most lost knowledge — ranked by size weighted by the file's role in the codebase, the same weighting behind the score above, so core code outranks equally large plumbing. A reasonable place to start a read-through before the aggregate risk above bites.
Most significant orphaned file src/sync.rs:1— One of the orphaned files carrying the most lost knowledge — ranked by size weighted by the file's role in the codebase, the same weighting behind the score above, so core code outranks equally large plumbing. A reasonable place to start a read-through before the aggregate risk above bites.
No ADRs found Cargo.toml:20— No ADRs found. No recognised ADR directory (`docs/adr/`, `docs/decisions/`, `adr/`, `docs/rfcs/`, an `ADR0001/` folder, or their siblings) exists anywhere in this tree. What was searched, so you can tell an empty log from a search that missed one: every directory under the tree (build output, dependencies and VCS metadata excepted), for a document that is either any non-index page inside a recognised ADR directory, whatever its name and however deeply nested (`docs/adr/use-postgres.md`, `docs/adr/2024/0001-x.md`); or a file anywhere whose name is ADR-shaped (`0001-use-postgres.md`, `adr-012-caching.md`); or, when neither turned anything up, a document carrying the decision-record signature (an "Architecture Decision Record" heading, or Status / Context / Decision / Consequences as section headings). A decision log that clears none of these — unnumbered files outside any recognised directory, without those headings — is not seen by this check and this row is then wrong. If that is your case, say so rather than renaming anything; otherwise, consider recording architectural decisions in `docs/adr/`. ADRs are expected here because `Cargo.toml` makes this repository a deployable product (line 20).
D26 · Project Cohesion· Projects may be oversized for their cohesion · ×1
Projects may be oversized for their cohesion — 1 of 6 project(s) overshoot their size bounds, lowering Project Cohesion to 6.7/10. The most over is `(repository root)` (144130 LoC, 756 module-visible types across 6 directories). Review these for cohesion — draw the boundary inside the module first (group each responsibility into its own package or directory and keep the cross-boundary members non-public), since splitting a published package moves types between packages and breaks consumers.
Dormant codebase — 160 of 160 significant files have no living knowledge — the codebase as a whole is dormant, not 160 separate risks. Counted over 160 of the 175 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over. Re-engage owners or document before change.
No ADRs — No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
Logging is not universal — Only 1/3 runnable modules use logging (modules with no entry point or server are excluded — they are libraries a runnable module hosts). Silent: `.`, `crates/seq_everruns_bridge`.
No SAST REDACTED:4— No static application security testing detected. For this repository's stack, add cargo-audit / cargo-deny (or clippy) (or `semgrep --config=auto`, which runs on any language) as a CI step. What was searched, so you can tell an absence from a miss: the 4 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner.
No release approval gate — The release is automated and no gate that pauses it for a human is DECLARED IN THIS REPOSITORY'S PIPELINE FILES. What was read: every file under `.github/workflows/`, `.forgejo/workflows/`, `.gitea/workflows/`, `.azuredevops/` and `.azure-pipelines/`, plus `.gitlab-ci*` and `azure-pipelines*` — with comment text stripped, so documenting a gate is not declaring one. What would have counted: GitLab's `when: manual`, CircleCI's `type: approval`, an Azure `ManualValidation@` task or an `approvals:` block, a Jenkins `input` step, a `uses:` step naming an approval action, an `environment:` paired with `reviewers` / `required_reviewers` / `protection` / `wait-timer` / `deployment_branch_policy`, a draft-release step, a `workflow_dispatch` promotion, or a release-event gate. ★ What this cannot see, because none of it is a file: a GitHub environment whose required reviewers are configured in repo SETTINGS, a branch protection rule, or an organisation deployment policy — all of them real, enforced gates that live outside the repository. If yours is one of those, this row is wrong and nothing in the tree could have told us. Otherwise: whatever the release trigger points at is published to users unreviewed, so a mistagged or unverified commit ships and the only remedy is a follow-up release.
No security response headers detected scripts/cdn-nginx.conf:6— None of the 11 security response headers the OWASP Secure Headers Project recommends (Content-Security-Policy, Strict-Transport-Security, X-Content-Type-Options, X-Frame-Options, …) is configured — defense in depth, even when a reverse proxy could set them. This is reported because `cdn-nginx.conf` is committed to this repository and declares the server that serves it, so the configuration that would carry these headers is in this repository and was read in full. (−2.0 on this card.)
No app-layer HTTPS enforcement detected — This repository starts an HTTP server and nothing in its Rust source or committed `Rocket.toml` secures the transport: no TLS served (actix-web `bind_rustls`/`bind_openssl`, axum-server `bind_rustls` with a `RustlsConfig`, tonic `ServerTlsConfig`, a `TlsAcceptor`, Rocket's `[default.tls]`), no `Strict-Transport-Security` header, no `X-Forwarded-Proto` read from a TLS-terminating proxy — so its traffic may cross the network in clear text. (−2.0 on this card.) The server: `axum::serve(` (src/log_server.rs:203).
Silent fallback default in catch scripts/vendor/bench_iteration.py:41— `git_head` swallows every exception into `return 'unknown'` — a data error becomes a silent behavior change with no trail. Log the failure or let it raise. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment on the handler or in the docstring, and the row stops firing.
Outdated: anyhow — `anyhow` is locked at 1.0.102 but 1.0.104 is the current stable release on crates.io, and it already satisfies the `"1"` requirement declared in Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p anyhow` and commit the updated REDACTED.
Outdated: blake3 — `blake3` is locked at 1.8.3 but 1.8.7 is the current stable release on crates.io, and it already satisfies the `"1"` requirement declared in Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p blake3` and commit the updated REDACTED.
Outdated: chrono — `chrono` is locked at 0.4.44 but 0.4.45 is the current stable release on crates.io, and it already satisfies the `"0.4.42"` requirement declared in Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p chrono` and commit the updated REDACTED.
Outdated: data-encoding — `data-encoding` is locked at 2.10.0 but 2.11.1 is the current stable release on crates.io, and it already satisfies the `"2.6"` requirement declared in Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p data-encoding` and commit the updated REDACTED.
Outdated: libc — `libc` is locked at 0.2.183 but 0.2.191 is the current stable release on crates.io, and it already satisfies the `"0.2"` requirement declared in Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p libc` and commit the updated REDACTED.
Outdated: rand — `rand` is locked at 0.10.0 but 0.10.3 is the current stable release on crates.io, and it already satisfies the `"0.10"` requirement declared in Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p rand` and commit the updated REDACTED.
Outdated: rpassword — `rpassword` is locked at 7.4.0 but 7.5.5 is the current stable release on crates.io, and it already satisfies the `"7"` requirement declared in Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p rpassword` and commit the updated REDACTED.
Outdated: serde_json — `serde_json` is locked at 1.0.149 but 1.0.154 is the current stable release on crates.io, and it already satisfies the `"1"` requirement declared in Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p serde_json` and commit the updated REDACTED.
Outdated: tempfile — `tempfile` is locked at 3.26.0 but 3.27.0 is the current stable release on crates.io, and it already satisfies the `"3"` requirement declared in Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p tempfile` and commit the updated REDACTED.
Outdated: thiserror — `thiserror` is locked at 2.0.18 but 2.0.21 is the current stable release on crates.io, and it already satisfies the `"2.0"` requirement declared in crates/seq_client/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p thiserror` and commit the updated REDACTED.
Outdated: uuid — `uuid` is locked at 1.22.0 but 1.29.2 is the current stable release on crates.io, and it already satisfies the `"1"` requirement declared in Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p uuid` and commit the updated REDACTED.
Outdated: which — `which` is locked at 8.0.2 but 8.0.6 is the current stable release on crates.io, and it already satisfies the `"8"` requirement declared in Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p which` and commit the updated REDACTED.
Appendix B — Reproduction & audit trail
Every external tool invocation behind a deep-scan dimension — the tool, its captured version, the exact command, how many findings it yielded, and a link to the retained raw output. To reproduce any finding: check out the same commit and run the command shown (repo-relative — never an absolute scratch path). The complete raw scanner output is retained verbatim under artifacts/raw/ (indexed in artifacts/raw/index.json); per-invocation exit codes and wall-clock durations are in sidecar.json — kept out of this table so the rendered report stays byte-identical across runs of the same commit.
trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.
semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.
disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
Run 01a1d894-d498-7070-a289-30cbd4268976 · every finding is also locatable in findings.md, and the complete scoring record (with exit codes + durations) in sidecar.json.
Issues: 65 · Warnings: 1385 · Recommendations: 311 · Info: 12 — Appendix A · all findings · full markdown report.
Generated by the Canine Code Analyzer: deterministic code-health analysis. 14-11-2026 @ 05:43 UTC.
Downloadable artifacts
Machine-readable and reproducible from this commit + frozen rubric — drop them straight into a contract appendix, a CRA dossier, or a downstream SCA / VEX tool.