Executive summary
mzyui/proxy-list falls short of our standard for production, held back most by its Code Health lens, the quality of the code itself. It scores 64.3 out of 100 and is rated Adequate, and all 14 of its critical findings are security problems.
Code Health, at 51.6, is the weakest lens and counts most in the score. The best first step is adding type checking, worth about 8.3 points. Recording design decisions comes next, worth about 3.5 points. Raising Code Health to 70 would lift the score to about 72.5.
Seven known security holes in the packages the code depends on can be used by attackers. Five pipeline tools are referenced by a changeable name, so the build pipeline can be tampered with, and one automatic update takes new releases before a bad one can be spotted. Updating the vulnerable packages, pinning each tool to an exact version and setting a waiting period for automatic updates would close these risks. Passing outside input through environment variables would fix the pipeline step that puts outside input straight into a shell command.
The product code is 2,411 lines, about €3,500 to rebuild.
If Code Health rose from 51.6 to 70, the lowest score rated Strong, the score would rise from 64.3 to about 72.5.
Rebuild cost: about €3,500 · Estimate
| Cost to rebuild | €1,200 to €5,900, for 20 to 62 hours of work, under 0.1 person-years for one engineer |
|---|---|
| Difficulty of the problem | Standard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write. |
| Quality factor | ×0.9 at a score of 64. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it. |
| Size | Small: 2,411 lines of product code |
| What it is not | Not a quotation: nobody has offered to build it for that. Not a valuation: it says nothing about what the business is worth. Not a certified figure: no professional has signed it as one. |
Top priorities
Diagnosis: what the measurements show together
At a glance — Code Health
At a glance — Architecture
At a glance — Maturity
At a glance — Readiness
At a glance — Security
At a glance — Performance
Security & Compliance — OWASP Top-10 mapping
| OWASP category | Findings | Severity |
|---|---|---|
| A05:2025 — Injection | 10 | High / Critical |
| A03:2025 — Software Supply Chain Failures | 8 | High / Critical |
Roadmap
Top priorities: Adopt TypeScript for the frontend: add a typecheck step to the build, then either type-check the existing JavaScript in place (`checkJs`/JSDoc types) or convert the highest-traffic modules first — no file is typed today, so this is an adoption, not a clean-up; Bring the 11 bodies over 15 down to 15 or less in Cognitive Complexity — start with formatter.writeOutputs (cognitive 39), safeArithmetic (cognitive 38), check-no-eval.stripNonCode (cognitive 30); Resolve the 1 No ADRs found finding(s) in ADR Quality — start with package.json.
| Do this | Helps | Effort | Dimension |
|---|---|---|---|
| Adopt TypeScript for the frontend: add a typecheck step to the build, then either type-check the existing JavaScript in place (`checkJs`/JSDoc types) or convert the highest-traffic modules first — no file is typed today, so this is an adoption, not a clean-up. | +8.3 pts | Medium | Type Safety |
| Resolve the 1 No ADRs found finding(s) in ADR Quality — start with package.json. | +3.5 pts | Low | ADR Quality |
| Bring the 11 bodies over 15 down to 15 or less in Cognitive Complexity — start with formatter.writeOutputs (cognitive 39), safeArithmetic (cognitive 38), check-no-eval.stripNonCode (cognitive 30). | +5.7 pts | High | Cognitive Complexity |
| Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them. | +3.1 pts | Medium | Architecture documentation |
| Bring the 4 bodies over 15 down to 15 or less in Cyclomatic Complexity — start with safe-parse.safeArithmetic (cyclomatic 32), formatter.writeOutputs (cyclomatic 23), run (cyclomatic 21). | +2.8 pts | High | Cyclomatic Complexity |
| Resolve the 8 finding(s) in Cyclomatic Complexity. | +2.7 pts | Medium | Cyclomatic Complexity |
| Swallowed exception (caught, then discarded) | +2.3 pts | Medium | Exception handling |
| Add a SAST step to CI running what this repository's stack ships: CodeQL's javascript-typescript pack, `semgrep --config=p/javascript`, or eslint-plugin-security — so a security regression fails the build instead of landing. | +2.0 pts | Medium | Security & performance tooling |
File quality
| File | Score | Band | Worst signal |
|---|---|---|---|
| REDACTED | 1.5 | Slop | Dependency Vulnerabilities: High CVE: REDACTED |
| REDACTED | 2.7 | Slop | Static Analysis (SAST): High: REDACTED |
| REDACTED | 5.8 | Mixed | Static Analysis (SAST): High: REDACTED |
| engine/src/utils/safe-parse.js | 7.2 | Mixed | Cyclomatic Complexity: safe-parse.safeArithmetic (cyclomatic 32) |
| REDACTED | 7.2 | Mixed | Static Analysis (SAST): High: REDACTED |
| engine/package.json | 7.5 | Mixed | Dependency Hygiene: Deprecated: eslint |
| engine/src/core/formatter.js | 7.8 | Mixed | Cyclomatic Complexity: formatter.writeOutputs (cyclomatic 23) |
| engine/src/index.js | 7.8 | Mixed | Cyclomatic Complexity: run (cyclomatic 21) |
| engine/scripts/check-no-eval.js | 7.8 | Mixed | Cyclomatic Complexity: check-no-eval.stripNonCode (cyclomatic 20) |
| REDACTED | 7.9 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| REDACTED | 7.9 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| engine/src/providers/geonode.js | 8.5 | Near-clean | Cognitive Complexity: fetch (cognitive 29) |
| engine/src/providers/free-proxy-list.js | 8.5 | Near-clean | Cognitive Complexity: free-proxy-list.fetch (cognitive 26) |
| engine/src/providers/freeproxy-world.js | 8.5 | Near-clean | Cognitive Complexity: freeproxy-world.fetch (cognitive 24) |
| engine/src/providers/proxylist-org.js | 8.5 | Near-clean | Cognitive Complexity: proxylist-org.fetch (cognitive 19) |
| engine/src/providers/spysone.js | 8.5 | Near-clean | Cognitive Complexity: scrapePage (cognitive 17) |
| engine/src/utils/format.js | 8.5 | Near-clean | Code Coverage: Low coverage: engine/src/utils/format.js |
| engine/src/utils/http-client.js | 8.5 | Near-clean | Code Coverage: Low coverage: engine/src/utils/http-client.js |
How the grades work
A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.
Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.
Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.
Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.
Methodology & how to trust this report
This survey is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. All 54 evaluated dimensions are computed by tools and static analysis; no language model sets or judges any of them. Overall confidence is 0.9, the weighted average across measured dimensions.
What we checked — 54 dimensions across the health lenses
- Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 66 of 74 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line.
- Is there a tool behind the number? Every score below names the method that produced it: Roslyn, git or a scanner, not a narrative.
- Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.
Tools & methods
| Method | Backs | Version | Evaluator |
|---|---|---|---|
| Roslyn static analysis | Complexity, cohesion, coupling, dead code, API surface, layering | 5.3.0 | ✓ deterministic |
| Native secret scanner | Hardcoded secrets / credentials | 1.0.0 | ✓ deterministic |
| Canine Code Analyzer duplication detector (in-process) | Code duplication | 1.0.0 | ✓ deterministic |
| Coverage (coverlet / dotnet-coverage) | Line & branch coverage | 10.0.400 | ✓ deterministic |
| NuGet / dotnet | Outdated, vulnerable & deprecated dependencies | 10.0.400 | ✓ deterministic |
| git / LibGit2Sharp | Churn hotspots, knowledge concentration, history | 2.43.0 · 0.31.0 | ✓ deterministic |
| gitleaks · semgrep · trivy | Secrets in history, SAST, CVEs, IaC & container, PII / GDPR | 1.86.0 · 0.69.3 | ✓ deterministic |
Run transparency — what happened this run
- D16 Bus Factor — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Single-maintainer repository — bus factor is not applicable (3 contributor(s) across 187 commit(s) sampled, automation and bot accounts excluded). One of them holds 95% of the history; the other 2 hold 2.5% each on average, below the 5% at which there is somebody to hand the work to. That is a single maintainer with drive-by contributors, not a team whose knowledge has concentrated — so the bus factor is not applicable and there is nothing here for the owner to act on.
- D22 Internal API Consistency — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D22's deterministic call-shape rules are gated per language (docs/plans/deterministic-engine.md, P5; C# and each NeutralApiArms arm pass): each other language is switched on only after its own concept suite and A/B gate pass. This says nothing about whether that surface is consistent.
- D44 Platform End-of-Life — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This dimension reads a project's own statement about the platform it runs on: a TargetFramework in a .NET project file, a .nvmrc or .python-version, a capped requires-python, a Rust toolchain file or Cargo.toml rust-version, a .go-version, .java-version, .ruby-version, .tool-versions or .sdkmanrc, a go.mod go directive, a Maven or Gradle Java level or toolchain, a Gemfile's ruby directive, a mix.exs elixir requirement, a rebar.config minimum_otp_vsn, a pubspec.yaml SDK constraint, a build.sbt scalaVersion, or a framework major pinned by a dependency constraint. This repository carries none of them, so nothing about its platform was established. That is a gap in this analyzer's coverage, NOT a finding that the platform is supported — a language whose runtime is declared elsewhere (Package.swift, a Dockerfile) is simply not read here yet.
- AXB2 Runtime readiness — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. `npm run` found no package.json in the folder where our sandbox ran it. This is a limit of our sandbox, not of your repository. (rule: no-root-manifest). The renderer reported: the dev server (`npm run start`) exited before it served a page. Likely cause (our sandbox): `npm run` found no package.json in the folder where our sandbox ran it. This is a limit of our sandbox, not of your repository. Last output: "npm error code ENOENT / npm error syscall open / npm error path <repo>/package.json / npm error errno -2 / npm error enoent Could not read package.json: Error: ENOENT: no such file or directory, open '<repo>/package.json' / npm error enoent This is related to npm not being able to find a file. / npm error enoent / npm error A complete log of this run can be found in: <path>" No runtime evidence was gathered.
- AXR1 Runtime accessibility — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Render strategy: boot via DevServer (start). the dev server (`npm run start`) exited before it served a page. Likely cause (our sandbox): `npm run` found no package.json in the folder where our sandbox ran it. This is a limit of our sandbox, not of your repository. Last output: "npm error code ENOENT / npm error syscall open / npm error path <repo>/package.json / npm error errno -2 / npm error enoent Could not read package.json: Error: ENOENT: no such file or directory, open '<repo>/package.json' / npm error enoent This is related to npm not being able to find a file. / npm error enoent / npm error A complete log of this run can be found in: <path>" No runtime evidence was gathered.
- M4 Documentation accuracy — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. M4 checks only the claim kinds adjudicated at or above 95 % precision: links and versions (PREREGISTRATION version 9), and artefact counts an order of magnitude off. Paths, command arguments, installs, environment variables, settings, projects, packages, routes, cd targets, infrastructure products and removed modules are read but not checked, and none of them is reported or counted.
- P5 DR & Backup — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. No backup/snapshot/replication config, RTO/RPO or restore-procedure documentation was found — and no production persistence was detected either (no data-access packages, no data-store services, no database resources), so there is nothing in this repository whose loss a DR control would recover. If this system's data lives in a platform or ops repo we can't see, that's where the DR evidence belongs.
- S1 Web-Security Posture — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 29 JavaScript/TypeScript file(s) were read for weak hashes and ciphers, key material fixed in the source, disabled certificate validation, obsolete TLS versions, plaintext password storage and session cookies set without HttpOnly, Secure or SameSite, and none was found. The server controls this dimension also scores were not assessed, so no score is given.
Limitations & what we did not check
We assess the repository exactly as committed, and only the repository. By design we do not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.
Per-dimension blind spots
- D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
- D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
- D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
- D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
- D8 Code Coverage: Coverage is measured by building and running the test suite inside our isolated image — the target repo is never modified, and nothing on your systems runs. So coverage exists only when the suite builds and runs within the inline time budget; one that needs external services, can't build, or exceeds the budget yields no coverage (D8 then degrades to not-measured, not a low score). Line coverage also says nothing about assertion quality.
- D10 Test Quality: Assertion density is structural — it cannot tell a meaningful behavioural assertion from a trivial one, only that an assertion is present.
- D11 Test Reliability: Flakiness is inferred from history/markers — we run the suite once (for coverage), not the repeated runs under varied conditions that reveal nondeterminism, so a flaky test never recorded as failing is invisible here.
- D12 Dependency Hygiene: Dependency health reads manifests and lockfiles — a vulnerability in a vendored/copied dependency, or risk from how a dependency is actually used, is outside this view.
- D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
- D14 License Compliance: License compatibility is checked against declared package metadata and a policy — mislabelled or missing license metadata, and obligations that depend on how you distribute, are not resolved here.
- D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
- D19 Documentation Quality: Documentation quality publishes two things only: a runnable or packaged unit with no example, and a multi-project root README that maps none of its parts. It does not judge clarity, and its other checks (overview, licence, boilerplate, structure, empty sections, XML-doc coverage) are withheld after adjudication: their candidates are counted in the card's gaps, not shown as rows. A false statement in a document is M4's; units are .NET projects only.
- D20 ADR Quality: ADR quality checks the structure of the decision records present: it cannot know about decisions made and never recorded, and it does not judge how well a record argues its case. Records in a language the section lexicon does not cover are not evaluated.
- D27 Navigability: Indirection/navigability is structural — it measures hops to follow a call, not whether that indirection buys real flexibility or just ceremony.
- D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
- D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
- D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
- D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
- D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
- D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
- AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
- M4 Documentation accuracy: Documentation accuracy checks links, versions and artefact counts against the tree: other claims (paths, commands, settings, routes) are read but not checked, and it cannot run the onboarding or measure how long a real new joiner takes.
Dimensions
D1 · Cyclomatic Complexity
7 method(s) exceeded the cyclomatic complexity threshold of 15; the worst was safe-parse.safeArithmetic at 32.
What to do
- Bring the 4 bodies over 15 down to 15 or less in Cyclomatic Complexity — start with safe-parse.safeArithmetic (cyclomatic 32), formatter.writeOutputs (cyclomatic 23), run (cyclomatic 21). — This score is capped by its worst body, so a finding fixed alone moves it by almost nothing — the next one down takes its place. Refactoring these 4 together lifts Cyclomatic Complexity from 7.6 to about 10.0/10, projected with the scoring formula itself and assuming each lands exactly at 15.
D2 · Cognitive Complexity
20 method(s) exceeded the cognitive complexity threshold of 15; the worst was formatter.writeOutputs at 39.
What to do
- Bring the 11 bodies over 15 down to 15 or less in Cognitive Complexity — start with formatter.writeOutputs (cognitive 39), safeArithmetic (cognitive 38), check-no-eval.stripNonCode (cognitive 30). — This score is capped by its worst body, so a finding fixed alone moves it by almost nothing — the next one down takes its place. Refactoring these 11 together lifts Cognitive Complexity from 5.1 to about 10.0/10, projected with the scoring formula itself and assuming each lands exactly at 15.
D3 · God Classes
0 god class(es) detected.
D4 · Code Duplication
0 duplicated block group(s) detected. 0.0 % of the production lines (0 of 2,411) are in a reported copy.
D8 · Code Coverage
Line coverage 84.3% — 2 file(s) below 50%. Measured from the JavaScript/TypeScript suite (jest via `npm ci --ignore-scripts` in engine/, the 3 run(s) test reliability made). Taken over 3 runs of the suite: a line counts as covered only when every run executed it.
What to do
- Resolve the 2 Low coverage finding(s) in Code Coverage — start with format.js, http-client.js. — One of this dimension's main actionable groups (2 warning-level).
D10 · Test Quality
0 skipped, 0 zero-assertion, no mocking-framework packages referenced (hand-written doubles or no mocking) across 66 tests.
D11 · Test Reliability
0 flaky across 1 measured tier(s). JavaScript/TypeScript (jest via `npm ci --ignore-scripts` in engine/ (97 tests)): measured (0 flaky).
D12 · Dependency Hygiene
5 outdated direct production npm dependency(ies) of 8 graded, 0 pinning defect(s), across 1 package.json (1 of them the product) and 1 committed lockfile(s). Development dependencies are deliberately not graded for currency: that grade is about what SHIPS. 1 direct dependency(ies) — production, development or optional — are marked DEPRECATED by their publisher (the registry's per-version mark, or the lockfile's copy of it when the registry could not be asked); deprecated transitive packages are listed but not charged. Whether any is UNMAINTAINED is not graded — the registry publishes no maintenance status, and release age does not stand in for one. Whether any is UNUSED is not graded either: that is a source question, and the frontend dependency lens (R8) answers it in this same run. Known CVEs in this dependency graph are D30's question, read from the manifest there.
What to do
- Resolve the 3 Deprecated finding(s) in Dependency Hygiene — start with REDACTED (3). — One of this dimension's main actionable groups (3 recommendation-level).
- Resolve the 1 Deprecated finding(s) in Dependency Hygiene — start with package.json. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 Outdated (npm) finding(s) in Dependency Hygiene — start with package.json. — One of this dimension's main actionable groups (1 recommendation-level).
D13 · Secret Scanning
Secret scan ran and found no leaked secrets.
D14 · License Compliance
0 of 88 shipped npm package(s) use a banned license. Licences were resolved from registry.npmjs.org over the 88 package(s) this repository's committed lockfile installs for a consumer — its 8 production, optional and peer dependency(ies), across 1 product package.json manifest(s), and everything those install in turn. Its 4 `devDependencies` declaration(s), and every package only they reach, are excluded: a consumer installs none of them. ★ Each licence is the one the registry publishes for the package's CURRENT release rather than for the pinned version, which is the same caveat the Hex and RubyGems arms carry. No third-party code was found shipping without a manifest entry (vendored or copied-in directories, licence comments preserved in committed bundles, bundled module paths, compiled wasm modules). This repository publishes itself under MIT, which is its own choice and is not judged here.
D15 · Churn × Complexity Hotspots
Top hotspots: engine/src/index.js (2×19=38)
What to do
- Resolve the 1 Hotspot finding(s) in Churn × Complexity Hotspots — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).
D19 · Documentation Quality
1 of 1 documentation facets pass in full. 5 document(s) read across 2 unit(s).
D20 · ADR Quality
No architecture decision records were found.
What to do
- Resolve the 1 No ADRs found finding(s) in ADR Quality — start with package.json. — One of this dimension's main actionable groups (1 recommendation-level).
D27 · Navigability
43 % of calls cross a namespace and 0 % go through an interface, but 100 % of collaborators are co-located — so a call's collaborators sit together and tracing stays easy. Baseline: small — navigation cost is tolerated.
D28 · Secrets (history)
gitleaks scanned the full history AND the current working tree and found no secrets.
D29 · Static Analysis (SAST)
10 finding(s): 0 critical, 7 high, 3 medium, 0 low. 5 unpinned-GitHub-Actions row(s) are reported here but scored by D36 (supply-chain provenance), which measures that posture as `pinned_actions` — one pinning decision is charged once, not once per lens. Separately, one or more rules could not re-parse an embedded snippet in 1 file(s) (e.g. a workflow `run:` block read as shell). Those files WERE scanned and their other rows are unaffected; only those rules' view of those snippets is missing.
What to do
- Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
- Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
- No action in Static Analysis (SAST) — all 5 REDACTED finding(s) are reported here at file:line but scored by D36 (supply-chain provenance), so none is charged to this dimension. — One of this dimension's main actionable groups (5 issue-level, 0 of them charged here).
D30 · Dependency Vulnerabilities
8 finding(s): 0 critical, 7 high, 1 medium, 0 low.
What to do
- Resolve the 7 High CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (7). — One of this dimension's main actionable groups (7 issue-level).
- Resolve the 1 Medium CVE finding(s) in Dependency Vulnerabilities — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).
D34 · Knowledge Freshness
Every significant source file has living knowledge — recently and meaningfully worked. Counted over 10 of the 28 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.
D35 · Change Coupling
No strong hidden change-coupling between production files.
D37 · Vulnerability-disclosure Policy
A vulnerability-disclosure policy (SECURITY.md) is published with a reporting contact.
D43 · Malicious Dependencies
No dependency in any ecosystem this repository declares is published as malicious.
Frontend & cross-cutting dimensions
AX10 · Code composition
AX3 · Project dependency cycles
AX4 · Dependency direction
GD1 · Unfinished & placeholder code
IC1 · Incompleteness & stubs
M1 · Documentation (README)
M2 · Architecture documentation
- No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
What to do
- Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
M3 · Folder & project structure
M4 · Documentation accuracy
P1 · CI/CD gates
- A CI pipeline exists but no build step was matched — changes may merge without the build ever running. A build step may be invoked directly as a command, or declared as a task that a runner named in the pipeline resolves.
What to do
- Add an explicit build step to your CI pipeline — your stack's own build command, or, if the pipeline delegates to a task runner, a build task that runner executes in CI — so every change is built before merge.
P10 · Library API & versioning
P3 · Security & performance tooling
- No static application security testing detected. For this repository's stack, add CodeQL's javascript-typescript pack, `semgrep --config=p/javascript`, or eslint-plugin-security as a CI step. What was searched, so you can tell an absence from a miss: the 2 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner. — REDACTED:10
What to do
- Add a SAST step to CI running what this repository's stack ships: CodeQL's javascript-typescript pack, `semgrep --config=p/javascript`, or eslint-plugin-security — so a security regression fails the build instead of landing.
- Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
PF3 · Async & latency hygiene
R1 · Type Safety
- 0 typed · 36 plain JS — the untyped files are engine/scripts/check-no-eval.js, engine/scripts/generate-readme.js, engine/scripts/smoke-check.js, REDACTED, engine/src/core/deduplicator.js, engine/src/core/formatter.js (+30 more).
What to do
- Adopt TypeScript for the frontend: add a typecheck step to the build, then either type-check the existing JavaScript in place (`checkJs`/JSDoc types) or convert the highest-traffic modules first — no file is typed today, so this is an adoption, not a clean-up.
R10 · Code Duplication
- engine/src/providers/freeproxy-world.js:18 · engine/src/providers/proxylist-org.js:19 — the two spans are one implementation copied and then locally edited — 184 tokens are still identical, in the same order in both files, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one. — engine/src/providers/freeproxy-world.js:18
- engine/scripts/check-no-eval.js:39 · engine/scripts/check-no-eval.js:71 — the two spans are one implementation copied and then locally edited — 63 tokens are still identical, in the same order in both spans, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one. — engine/scripts/check-no-eval.js:39
- engine/src/providers/openproxylist.js:18 · engine/src/providers/proxyscrape.js:18 — the 2 copies sit in sibling files in one directory, so check first whether one of them (or an existing module there) already owns this behaviour and the others should call it; otherwise extract it into one module in that directory and have each site call it. — engine/src/providers/openproxylist.js:18
- engine/src/providers/openproxylist.js:22 · engine/src/providers/proxyscan.js:25 · engine/src/providers/proxyscrape.js:22 — the 3 copies sit in sibling files in one directory, so check first whether one of them (or an existing module there) already owns this behaviour and the others should call it; otherwise extract it into one module in that directory and have each site call it. There is one copy in each of 3 separate files rather than several in one place, so check first whether these are sibling modules that each declare their own version of one shape — one per entity, per provider, per language. Where they are, no single extracted module collapses them: each module still has to be written, and what recurs is the TEMPLATE. The moves that do collapse a template are to generate these modules from the set they enumerate, or to replace the repeated construction with one factory each site calls with its own values — and where the set is the point, each module pinning one distinct thing, the repetition IS the enumeration and there is nothing to delete. — engine/src/providers/openproxylist.js:22
- engine/src/core/scraper.js:45 · engine/src/core/scraper.js:56 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. — engine/src/core/scraper.js:45
- engine/src/core/formatter.js:184 · engine/src/core/formatter.js:228 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. — engine/src/core/formatter.js:184
- engine/src/utils/safe-parse.js:145 · engine/src/utils/safe-parse.js:179 — all 2 copies are in the same file, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — engine/src/utils/safe-parse.js:145
What to do
- Act on each finding's own remediation rather than one rule: the move depends on what recurs. Where the copies are executable blocks, give the shared part one home and call it from each site; where they are declarations, a listing, a specialisation already delegating to its base, or one shape repeated per entity, there is no call site and the move is a shared type, a generated set or a factory — sometimes there is nothing to extract.
R2 · Cyclomatic Complexity
- writeOutputs has cyclomatic complexity 22 and cognitive complexity 38; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — engine/src/core/formatter.js:167
- stripNonCode has cyclomatic complexity 20 and cognitive complexity 38; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — engine/scripts/check-no-eval.js:28
- fetch has cyclomatic complexity 15 and cognitive complexity 26; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — engine/src/providers/free-proxy-list.js:19
- fetch has cyclomatic complexity 14 and cognitive complexity 29; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — engine/src/providers/geonode.js:26
- run has cyclomatic complexity 14 and cognitive complexity 15; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — engine/src/index.js:21
- fetch has cyclomatic complexity 11 and cognitive complexity 24; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — engine/src/providers/freeproxy-world.js:18
- request has cyclomatic complexity 11 and cognitive complexity 14; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — engine/src/utils/http-client.js:64
- multiplicative has cyclomatic complexity 11 and cognitive complexity 13; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — engine/src/utils/safe-parse.js:59
R3 · Large Files
R4 · Test Coverage
- No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one. (×2) — engine/scripts/generate-readme.js:1, engine/scripts/check-no-eval.js:1
What to do
- Add tests that import the unreached modules (directly or through their public entry).
R5 · Dependency Freshness
R6 · Tooling
- test ✓ · lint ✓ · typecheck ✗ — read from this repository's package.json scripts and corroborated against its CI workflows. A script counts when its name or command matches the step: `test` for the suite, `lint` or `prettier` for linting, `typecheck`/`type-check`/`tsc` for type checking. ✗ therefore means no script or CI step under those names was found, NOT that the step is absent from your pipeline — a task invoked by a runner this check does not read, or named something else entirely, is not seen and is worth confirming before acting on a cross. A ✓ means the wiring is DECLARED — a script or CI step under those names exists. It is not a statement that the step passes, or that it runs at all: nothing here installs a dependency or executes a suite.
What to do
- Add type checking (adopt TypeScript, or type-check the existing JavaScript with `checkJs`) as package.json scripts and run them in CI.
R7 · Dead Code
R8 · Dependency Hygiene
- Declared in engine/package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it. — engine/package.json:29
What to do
- Remove unused dependencies, declare unlisted imports explicitly, and demote type-/test-only packages to devDependencies.
R9 · Circular Imports
X1 · Async correctness
X12 · Unreachable branch
X16 · Unfloored truncation loop
X2 · Cancellation propagation
X23 · Unguarded diagnostic materialisation
X25 · Inert configuration knob
X28 · Index access outside its own emptiness guard
X29 · Per-element action decided by a fixed element
X3 · Exception handling
- `catch` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, or keep only the failure you expect and rethrow the rest (`catch (e) { if (!(e instanceof SyntaxError)) throw e; … }`, or test `e.name`), because a JavaScript catch takes every exception, programming errors included. — engine/src/utils/http-client.js:36
- An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it. (×2) — engine/src/utils/logger.js:19, engine/src/utils/logger.js:45
What to do
- Swallowed exception (caught, then discarded)
X4 · Structured logging
Reference — by lens
| Lens | Score | Rating | Impact |
|---|---|---|---|
| Code Health | 51.6 | Adequate — gated by R1 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Architecture | 98.2 | Exemplary | Solid. |
| Maturity | 68.9 | Adequate — gated by M2 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Readiness | 69.6 | Adequate — gated by P3 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Security | 86.8 | Strong | Solid. |
| Performance | 100.0 | Exemplary | Strongest area. |
Unscored — 1 check(s) recorded observations but carry no score
- X7 Silent fallback defaults — 2 observation(s) recorded · Advisory — this card reports evidence and never carries a score.
Not evidenced — 3 control(s) we could not find positive evidence for
- P4 Deployment & Rollback — not evidenced — no deploy/rollback/approval signal in the repo; absence of evidence is not evidence of a manual release
- P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
- P6 Release Hygiene — not evidenced — no changelog, version stamp or semver release tag in the repo
Not included — 71 check(s) not relevant to this codebase
- AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
- AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
- AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
- AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
- AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
- AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
- AX1 Captive dependencies — Not applicable: this repository's JavaScript imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's.
- AX2 Stateful singletons — Not applicable: TypeScript/JavaScript runs each process's requests on one event loop, so no two requests write a shared object at the same instant (interleaving across an await is a different defect).
- AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX6 Interface segregation — not applicable — JavaScript has no interface declaration, so there is no declared member list whose width this check could measure
- AX7 Slice cohesion — not applicable — not a vertical-slice architecture
- AX8 Test isolation — no test/production split to check
- AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
- AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- AXR1 Runtime accessibility — the dev server (`npm run start`) exited before it served a page. Likely cause (our sandbox): `npm run` found no package.json in the folder where our sandbox ran it. This is a limit of our sandbox, not of your repository. Last output: "npm error code ENOENT / npm error syscall open / npm error path <repo>/package.json / npm error errno -2 / npm error enoent Could not read package.json: Error: ENOENT: no such file or directory, open '<repo>/package.json' / npm error enoent This is related to npm not being able to find a file. / npm error enoent / npm error A complete log of this run can be found in: <path>" No runtime evidence was gathered. This is a statement about this run, not a statement about your application: nothing here says the surface is inaccessible, only that it was never rendered.
- C1 Data Protection — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a TypeORM/MikroORM/sequelize-typescript/NestJS-Mongoose entity, a Mongoose schema, a Sequelize or Drizzle table, a Knex migration or a Prisma model — and no database or data-store client in the source either, so this repository keeps no data at rest for these controls to protect. If it does persist personal data (through a hosted backend configured outside this repository, for instance), the controls belong to wherever that data is stored.
- C2 Access Controls — No access-control surface detected in the analyzed source — this repository stands up no server (no Express, Fastify, Koa, Hono, NestJS or similar app, no Next.js/SvelteKit/Nuxt server route, no edge function), creates no Supabase tables and talks to no hosted backend. Access control is therefore N/A here — a browser application or library is authorized by the server it calls, not by itself; a client-side route guard hides a page and authorizes nothing. If this codebase grows request handlers, the dimension reactivates and a default-deny posture is expected then.
- C3 Audit Trail — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a TypeORM/MikroORM/sequelize-typescript/NestJS-Mongoose entity, a Mongoose schema, a Sequelize or Drizzle table, a Knex migration or a Prisma model — and no database or data-store client in the source either, so this repository keeps no sensitive data whose changes an audit trail would record. If it does (through a hosted backend configured outside this repository, for instance), the trail belongs to wherever that data is stored.
- C4 Data Retention — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a TypeORM/MikroORM/sequelize-typescript/NestJS-Mongoose entity, a Mongoose schema, a Sequelize or Drizzle table, a Knex migration or a Prisma model — and no database or data-store client in the source either, so this repository keeps no personal data whose lifetime a retention limit would bound. If it does (through a hosted backend configured outside this repository, for instance), the limit belongs wherever that data is stored.
- C5 Data-Subject Rights — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a TypeORM/MikroORM/sequelize-typescript/NestJS-Mongoose entity, a Mongoose schema, a Sequelize or Drizzle table, a Knex migration or a Prisma model — and no database or data-store client in the source either, so this repository keeps no personal data for a data subject to erase, export or consent over. If it does (through a hosted backend configured outside this repository, for instance), the rights are served wherever that data is stored.
- D16 Bus Factor — single-maintainer repository — bus factor is not applicable
- D17 Explicit Debt — explicit-debt markers are read through a C# workspace today, so they were not read for this repository's language — this asserts nothing about how many markers the code carries. Not scored — this is a gap in the analyzer, not a finding about this repository
- D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
- D21 Naming Consistency — N/A — too few peers to establish a naming convention (154 declarations, no unit with a dominant convention).
- D22 Internal API Consistency — API consistency is measured on C#, TypeScript, Go only; the exposed JavaScript surface was not measured.
- D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ sibling projects each declaring an entity of their own or taking another project's integration events. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
- D24 Comment Value — Too few judgeable comments (18 of at least 30); comment value is not applicable here.
- D25 ADR Conformance — no ADRs to check
- D26 Project Cohesion — This repository is one build unit, `engine` (2411 LoC, 26 module-visible types across 6 directories), within the size bounds. Not scored: a single unit of this size gives project cohesion nothing to grade.
- D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.
- D32 Data Compliance (PII/GDPR) — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.
- D36 Supply-chain Provenance & Signing — The CI pipeline publishes no artifact — no package publish, container push or release with files to download. Supply-chain provenance, signing and an SBOM describe a PUBLISHED artifact for the people who obtain it, so there is nothing to attest here; a deployment of the service itself publishes nothing for anyone else to verify. Add them to the release pipeline when this repo starts publishing artifacts (a package, a container image, or a release with downloadable files).
- D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
- D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
- D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
- D44 Platform End-of-Life — Platform end-of-life not assessed — this repository declares no platform this pass reads
- D5 Coupling — Not applicable — this npm build ships 1 production module(s), so there is no coupling BETWEEN modules to measure. (Its test and non-production modules are not part of the shipped graph.)
- D6 Cohesion (LCOM4) — No production classes were analyzable, so cohesion (LCOM4) was not measured (the solution likely failed to load or has no production code).
- D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
- DM1 Domain Modelling — not scored — this repository shows none of the 3 signals this lens looks for
- ED1 Event-Driven — not scored — this repository shows none of the 3 signals this lens looks for
- ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
- ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
- P12 CI test-gate honesty — Reported, not scored — this card publishes what the CI gate does with the test inventory rather than grading it. The findings above are its output.
- P2 Observability — This repository's JavaScript/TypeScript source (1 module(s), 26 file(s) read) declares no entry point and bootstraps no server, and nothing here deploys a service — it is a library, run inside whatever hosts it, so production observability (structured logging, tracing/metrics, health checks) is N/A. If it grows a binary or a service, the dimension reactivates.
- P7 Outbound HTTP resilience — not applicable — no HTTP server, API framework or worker entry point was found in the JavaScript/TypeScript source, so there is no service whose uptime a failing dependency could take down
- P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
- P9 Domain vs controller coverage — coverage data present for 10 file(s), but no domain-layer files were identified: no covered file's path contains any of the markers this check keys on (/domain/, /aggregates/, /valueobjects/, /domainmodel/, .domain/, /entities/), which are matched case-insensitively anywhere in the path. With no domain partition there is nothing to compare the web/controller layer against — if this repository keeps its business rules under a folder named none of those, that naming is what the check cannot see, not the domain logic.
- PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for tinybench, mitata, benchmark.js, benny or vitest `bench(...)` calls in files that import them (or `*.bench.*` files), or one of those in a package.json, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
- PF2 Allocation hygiene — Not scored: this check counted allocation-aware idioms (Span, pools, stackalloc) per line, which describes what kind of code a repository is rather than whether it has an allocation problem, so it was withdrawn. Nothing here is a finding about your code.
- R11 Import Boundaries — No recognizable feature-sliced/layered src layout — boundary rules not applicable.
- S1 Web-Security Posture — Not assessed: 29 JavaScript/TypeScript file(s) were read for weak hashes and ciphers, key material fixed in the source, disabled TLS certificate validation, obsolete TLS versions, passwords stored or checked as plaintext and session cookies set without HttpOnly, Secure or SameSite, and none was found. That half of the dimension is clean, but it is not scored on its own: a C# repository with the same clean reading is scored on its server controls as well, or is N/A for having no web surface, and neither can be decided here. Of the server controls, two are read where the source shows them: every session or sign-in cookie the code sets is read for HttpOnly, Secure and SameSite at the line that sets it (a raw `Set-Cookie` header, Express, Fastify, Hono, Koa, Next.js, `cookie.serialize`, express-session and cookie-session), and every Node listener for HTTPS enforcement. HSTS, security response headers and input validation are NOT assessed for JavaScript/TypeScript: each is scored as an absence, an absence is only reportable over the production HTTP server, and in this ecosystem the file that opens the port is build output or a framework launcher rather than a file in the source tree. Their absence here is not a finding about this repository.
- SC1 Supply-chain hygiene — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X10 Duplicated predicate — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X13 Undrained process stream — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X14 Bypassable address classification — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X15 Unvalidated length from an untrusted reader — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X17 Uncapped recursion over a caller-supplied document — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X18 Disposal-pattern correctness — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X19 Unrestored process-global state — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X20 Mistyped argument guard — This check asks whether an argument guard reports an EMPTY value as a NULL one, which needs a language that throws a null-specific argument exception — .NET's ArgumentNullException, the JVM's NullPointerException, Dart's ArgumentError.notNull. This repository contains none of those languages: the ones it is written in have a single exception for a bad argument, so there is no pair of exceptions to confuse and nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
- X21 Side-effecting pattern guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X22 Contradicted release guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X24 Document value interpolated into markup unescaped — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X26 Unsynchronised callback handoff — Not applicable: this check looks for a collection written by a callback on one thread while the body waiting on it touches it on another, and in this repository's languages no collection is reachable from two threads at once. TypeScript/JavaScript runs every callback on the one thread that owns its objects: a callback runs only when the body waiting on it has yielded, never alongside it, and a worker thread receives a COPY of what it is sent. A SharedArrayBuffer carries raw bytes, never an Array, Map or Set, so no collection is reachable from two threads at once. Not a gap in the analyzer and not a finding about your code.
- X27 Collection changed while being enumerated — Not applicable: this check looks for a loop whose body adds to or removes from the very collection the loop is walking, invalidating the enumerator it holds, and in this repository's languages that cannot happen. JavaScript and TypeScript have no iterator that a change can invalidate: an `Array` is walked by index against its live length, and a `Map` or `Set` by the ECMAScript specification's live entry list, so a body that adds to, removes from or empties what it walks raises nothing — every loop form (`for…of`, `for…in`, `forEach`, `map`, `filter`, `reduce`, `entries()`) on every built-in collection (`Array`, `Map`, `Set`, plain objects, `URLSearchParams`, `Headers`, `FormData`) runs to completion. Such a loop can still skip an element or never end, which is a different defect and not the one this check asks about. Not a gap in the analyzer and not a finding about your code.
- X30 Support guard that admits what it rejects — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
- X5 Nullable reference types — Not applicable: this check asks whether the null-typed discipline a language offers is switched on, and how much of that the assertion operator takes back, and in this repository's languages there is no such switch and no such operator. Plain JavaScript carries no type annotations and commits no tsconfig, so it states no null-typed discipline for this check to grade: there is nothing here that switches null checking on or off, and TypeScript (or `// @ts-check`) is how a repository acquires one — advice, not a defect this card measures. Not a gap in the analyzer and not a finding about your code.
- X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Appendix A — Findings (grouped)
Critical — 14 finding(s)
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
Serious — 46 finding(s)
- REDACTED
- REDACTED
- Low coverage: engine/src/utils/format.js engine/src/utils/format.js:1
- Low coverage: engine/src/utils/http-client.js engine/src/utils/http-client.js:1
- No test reaches this file engine/scripts/generate-readme.js:1
- No test reaches this file engine/scripts/check-no-eval.js:1
- Swallowed exception (empty catch) engine/src/utils/logger.js:19
- Swallowed exception (empty catch) engine/src/utils/logger.js:45
- safe-parse.safeArithmetic (cyclomatic 32) engine/src/utils/safe-parse.js:21
- formatter.writeOutputs (cyclomatic 23) engine/src/core/formatter.js:167
- run (cyclomatic 21) engine/src/index.js:21
- check-no-eval.stripNonCode (cyclomatic 20) engine/scripts/check-no-eval.js:28
- Deprecated: eslint engine/package.json:38
- Hotspot: engine/src/index.js engine/src/index.js:21
- formatter.writeOutputs (cognitive 39) engine/src/core/formatter.js:167
- safeArithmetic (cognitive 38) engine/src/utils/safe-parse.js:21
- check-no-eval.stripNonCode (cognitive 30) engine/scripts/check-no-eval.js:28
- fetch (cognitive 29) engine/src/providers/geonode.js:26
- free-proxy-list.fetch (cognitive 26) engine/src/providers/free-proxy-list.js:19
- freeproxy-world.fetch (cognitive 24) engine/src/providers/freeproxy-world.js:18
- index.run (cognitive 20) engine/src/index.js:21
- safe-parse.parseSpysVars (cognitive 19) engine/src/utils/safe-parse.js:129
- proxylist-org.fetch (cognitive 19) engine/src/providers/proxylist-org.js:19
- safe-parse.decodeSpysPort (cognitive 18) engine/src/utils/safe-parse.js:172
- scrapePage (cognitive 17) engine/src/providers/spysone.js:28
- REDACTED
- REDACTED
- Type Safety
- Duplicated block with local edits (35 matched lines × 2 locations) engine/src/providers/freeproxy-world.js:18
- Duplicated block with local edits (20 matched lines × 2 locations) engine/scripts/check-no-eval.js:39
- Duplicated block (19 lines × 2 locations) engine/src/providers/openproxylist.js:18
- Duplicated block (16 lines × 3 locations) engine/src/providers/openproxylist.js:22
- Duplicated block (9 lines × 2 locations) engine/src/core/scraper.js:45
- Duplicated block (7 lines × 2 locations) engine/src/core/formatter.js:184
- Duplicated block (5 lines × 2 locations) engine/src/utils/safe-parse.js:145
- Complex function writeOutputs (cyclomatic 22, cognitive 38) engine/src/core/formatter.js:167
- Complex function stripNonCode (cyclomatic 20, cognitive 38) engine/scripts/check-no-eval.js:28
- Complex function fetch (cyclomatic 15, cognitive 26) engine/src/providers/free-proxy-list.js:19
- Complex function fetch (cyclomatic 14, cognitive 29) engine/src/providers/geonode.js:26
- Complex function run (cyclomatic 14, cognitive 15) engine/src/index.js:21
- Complex function fetch (cyclomatic 11, cognitive 24) engine/src/providers/freeproxy-world.js:18
- Complex function request (cyclomatic 11, cognitive 14) engine/src/utils/http-client.js:64
- Complex function multiplicative (cyclomatic 11, cognitive 13) engine/src/utils/safe-parse.js:59
- No typecheck script
- Unused dependency 'csv-writer' engine/package.json:29
- Swallowed exception (caught, then discarded) engine/src/utils/http-client.js:36
Minor — 10 finding(s)
- Deprecated: glob REDACTED:2948
- Deprecated: inflight REDACTED:3194
- Deprecated: whatwg-encoding REDACTED:5334
- Silent fallback default in catch engine/scripts/generate-readme.js:28
- Silent fallback default in catch engine/scripts/generate-readme.js:40
- Outdated (npm): p-limit engine/package.json:32
- No ADRs found engine/package.json:10
- No ADRs
- CI build step not evidenced
- No SAST REDACTED:10
Minor — 4 finding(s)
- Outdated (npm): axios
- Outdated (npm): https-proxy-agent
- Outdated (npm): joi
- Outdated (npm): socks-proxy-agent
Appendix B — Reproduction & audit trail
| Dimension | Tool | Version | Command | Findings | Raw output |
|---|---|---|---|---|---|
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=0 --max-count=200" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=200 --max-count=195" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-1.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-1.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=395 --max-count=368" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-2.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-2.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=763 --max-count=628" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-3.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-3.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=1391 --max-count=960" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-4.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-4.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=2351 --max-count=771" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-5.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-5.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=3122 --max-count=625" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-6.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-6.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=3747 --max-count=687" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-7.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-7.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=4434 --max-count=750" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-8.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-8.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=5184 --max-count=803" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-9.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-9.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=5987 --max-count=829" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-10.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-10.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=6816 --max-count=781" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-11.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-11.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=7597 --max-count=705" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-12.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-12.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=8302 --max-count=651" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-13.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-13.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=8953 --max-count=542" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-14.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-14.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=9495 --max-count=486" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-15.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-15.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=9981 --max-count=422" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-16.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-16.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=10403 --max-count=351" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-17.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-17.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=10754 --max-count=276" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-18.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-18.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=11030 --max-count=231" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-19.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-19.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=11261 --max-count=200" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-20.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-20.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=11461 --max-count=174" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-21.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-21.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=11635 --max-count=143" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-22.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-22.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --log-opts "--full-history --all --skip=11778 --max-count=30" --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/history-23.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history-23.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-cd9be482f0f9402494e1489a89c2ff6b/tree.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-tree.json |
| D29 · Static Analysis (SAST) | semgrep | — | semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/canine-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off --exclude *.arrow --exclude *.avro --exclude *.csv --exclude *.dat --exclude *.db --exclude *.feather --exclude *.geojson --exclude *.h5 --exclude *.hdf5 --exclude *.jsonl --exclude *.log --exclude *.ndjson --exclude *.npy --exclude *.npz --exclude *.orc --exclude *.parquet --exclude *.pickle --exclude *.pkl --exclude *.psv --exclude *.sqlite --exclude *.sqlite3 --exclude *.tfrecord --exclude *.tsv --exclude *.txt . | 10 | artifacts/raw/semgrep.json |
| D30 · Dependency Vulnerabilities | trivy | — | trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs **/bin/** --skip-dirs **/obj/** . | 8 | artifacts/raw/trivy-fs.json |
| D31 · IaC & Container Security | trivy | — | trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan. | 0 | — |
| D32 · Data Compliance (PII/GDPR) | semgrep | — | semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that. | 0 | — |
| D36 · Supply-chain Provenance & Signing | provenance | — | provenance: not applicable — The CI pipeline publishes no artifact — no package publish, container push or release with files to download. Supply-chain provenance, signing and an SBOM describe a PUBLISHED artifact for the people who obtain it, so there is nothing to attest here; a deployment of the service itself publishes nothing for anyone else to verify. Add them to the release pipeline when this repo starts publishing artifacts (a package, a container image, or a release with downloadable files). | 0 | — |
| D40 · Network Egress Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here. | 0 | — |
| D41 · Kernel & Syscall Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here. | 0 | — |
| D42 · Runtime Threat Enforcement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here. | 0 | — |
| D43 · Malicious Dependencies | trivy | — | trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs **/bin/** --skip-dirs **/obj/** . | 0 | artifacts/raw/trivy-fs.json |