Executive summary
lovell/sharp falls short of our standard for a preview release, held back most by its Code Health lens, the quality of the code itself. It scores 52 out of 100 and is rated Adequate, and all 14 of its critical findings are security problems in the build pipeline and in its automatic dependency updates.
Code Health, at 37, is the weakest lens and counts most in the score. The best first step is adding type checking, worth about 7 points. Recording design decisions comes next, worth about 6 points. Raising Code Health to 67 would lift the score to about 63.
Thirteen pipeline tools are referenced by a changeable name, so the build pipeline can be tampered with. One automatic update takes new releases before a bad one can be spotted. Pinning each tool to an exact version and setting a waiting period for automatic updates would close both risks.
The product code is 6,293 lines, about €24,000 to rebuild.
If Code Health rose from 37 to 67, the lowest score rated Strong, the score would rise from 52 to about 63.
New since the last survey: 9 findings
- Large Files · lib/output.mjs: 1763 lines of code lib/output.mjs
- Exception handling · Swallowed exception (empty catch) lib/libvips.mjs
- Exception handling · Swallowed exception (empty catch) lib/libvips.mjs
- Exception handling · Swallowed exception (empty catch) lib/libvips.mjs
- Exception handling · Swallowed exception (empty catch) lib/libvips.mjs
- Exception handling · Swallowed exception (empty catch) lib/libvips.mjs
- Exception handling · Swallowed exception (empty catch) lib/libvips.mjs
- Exception handling · Swallowed exception (empty catch) lib/utility.mjs
- Exception handling · Swallowed exception (empty catch) lib/utility.mjs
Fixed since the last survey: 9 findings
- Large Files · lib/output.mjs: 1760 lines of code lib/output.mjs
- Exception handling · Swallowed exception (empty catch) lib/utility.mjs
- Exception handling · Swallowed exception (empty catch) lib/utility.mjs
- Exception handling · Swallowed exception (empty catch) lib/libvips.mjs
- Exception handling · Swallowed exception (empty catch) lib/libvips.mjs
- Exception handling · Swallowed exception (empty catch) lib/libvips.mjs
- Exception handling · Swallowed exception (empty catch) lib/libvips.mjs
- Exception handling · Swallowed exception (empty catch) lib/libvips.mjs
- Exception handling · Swallowed exception (empty catch) lib/libvips.mjs
Rebuild cost: about €24,000 · Estimate
| Cost to rebuild | €7,900 to €40,000, for 132 to 420 hours of work, about 0.2 person-years for one engineer |
|---|---|
| Difficulty of the problem | Standard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write. |
| Quality factor | ×0.7 at a score of 52. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it. |
| Size | Small: 6,293 lines of product code |
| What it is not | Not a quotation: nobody has offered to build it for that. Not a valuation: it says nothing about what the business is worth. Not a certified figure: no professional has signed it as one. |
Top priorities
Diagnosis: what the measurements show together
Architecture — module dependency graph
At a glance — Code Health
At a glance — Architecture
At a glance — Maturity
At a glance — Readiness
At a glance — Security
At a glance — Performance
Security & Compliance — OWASP Top-10 mapping
| OWASP category | Findings | Severity |
|---|---|---|
| A05:2025 — Injection | 16 | High / Critical |
| A03:2025 — Software Supply Chain Failures | 5 | Medium |
Roadmap
Top priorities: Bring the 26 bodies over 15 down to 15 or less in Cognitive Complexity — start with _createInputDescriptor (cognitive 473), output.tile (cognitive 74), output.tiff (cognitive 72); Adopt TypeScript for the frontend: add a typecheck step to the build, then either type-check the existing JavaScript in place (`checkJs`/JSDoc types) or convert the highest-traffic modules first — no file is typed today, so this is an adoption, not a clean-up; Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
| Do this | Helps | Effort | Dimension |
|---|---|---|---|
| Adopt TypeScript for the frontend: add a typecheck step to the build, then either type-check the existing JavaScript in place (`checkJs`/JSDoc types) or convert the highest-traffic modules first — no file is typed today, so this is an adoption, not a clean-up. | +6.6 pts | Medium | Type Safety |
| Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them. | +6.0 pts | Medium | Architecture documentation |
| Bring the 26 bodies over 15 down to 15 or less in Cognitive Complexity — start with _createInputDescriptor (cognitive 473), output.tile (cognitive 74), output.tiff (cognitive 72). | +10.0 pts | High | Cognitive Complexity |
| Resolve the 3 redundant comment finding(s) in Comment Value — start with input.mjs (2), from-local-build.js. | +1.7 pts | Low | Comment Value |
| Add a build/run (quick start) section to the root README — the first thing a newcomer needs. | +2.8 pts | Medium | Documentation (README) |
| Swallowed exception (empty catch) | +2.5 pts | Medium | Exception handling |
| `async` callback passed to `forEach` | +2.4 pts | Medium | Async correctness |
| Split each oversized file along the responsibilities already in it, into smaller focused modules in the same package. | +2.3 pts | Medium | Large Files |
File quality
| File | Score | Band | Worst signal |
|---|---|---|---|
| REDACTED | 2.3 | Slop | Static Analysis (SAST): High: REDACTED |
| lib/input.mjs | 6.3 | Mixed | Cyclomatic Complexity: input._createInputDescriptor (cyclomatic 178) |
| REDACTED | 6.9 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| lib/output.mjs | 7.0 | Near-clean | Cyclomatic Complexity: output.tile (cyclomatic 34) |
| lib/operation.mjs | 7.0 | Near-clean | Cyclomatic Complexity: operation.affine (cyclomatic 21) |
| lib/resize.mjs | 7.1 | Near-clean | Cyclomatic Complexity: resize.resize (cyclomatic 34) |
| REDACTED | 7.2 | Near-clean | Static Analysis (SAST): High: REDACTED |
| lib/composite.mjs | 7.8 | Near-clean | Cyclomatic Complexity: composite (cyclomatic 22) |
| npm/win32-ia32/package.json | 7.9 | Near-clean | Platform End-of-Life: End-of-life runtime: Node.js 20 |
| lib/constructor.mjs | 8.5 | Near-clean | God Classes: FunctionTooLong: constructor.Sharp |
| npm/from-local-build.js | 9.5 | Near-clean | Comment Value: redundant comment |
How the grades work
A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.
Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.
Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.
Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.
Methodology & how to trust this report
This survey is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. All 51 evaluated dimensions are computed by tools and static analysis; no language model sets or judges any of them. Overall confidence is 0.8, the weighted average across measured dimensions.
What we checked — 51 dimensions across the health lenses
- Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 132 of 141 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line.
- Is there a tool behind the number? Every score below names the method that produced it: Roslyn, git or a scanner, not a narrative.
- Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.
Tools & methods
| Method | Backs | Version | Evaluator |
|---|---|---|---|
| Roslyn static analysis | Complexity, cohesion, coupling, dead code, API surface, layering | 5.3.0 | ✓ deterministic |
| Native secret scanner | Hardcoded secrets / credentials | 1.0.0 | ✓ deterministic |
| Canine Code Analyzer duplication detector (in-process) | Code duplication | 1.0.0 | ✓ deterministic |
| Coverage (coverlet / dotnet-coverage) | Line & branch coverage | 10.0.400 | ✓ deterministic |
| NuGet / dotnet | Outdated, vulnerable & deprecated dependencies | 10.0.400 | ✓ deterministic |
| git / LibGit2Sharp | Churn hotspots, knowledge concentration, history | 2.43.0 · 0.31.0 | ✓ deterministic |
| gitleaks · semgrep · trivy · checkov | Secrets in history, SAST, CVEs, IaC & container, PII / GDPR | 1.86.0 · 0.69.3 · 3.2.533 | ✓ deterministic |
Run transparency — what happened this run
- D4 Code Duplication — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Most of this repository's production source (.cc) was not read by duplication detection: no source of those file kinds was exposed to the token comparison by any language model this pass could load. Duplication in .js, .mjs is measured by R10 Code Duplication and is not part of this gap.
- D8 Code Coverage — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Coverage NOT MEASURED: test source is present (.mts, .cts) and the coverage collector does support this ecosystem — it drives jest, vitest and mocha — but the test script invokes plain node, a bespoke harness the collector has no way to instrument, so no coverage was collected. Read from the manifests: the root package has a `scripts.test` of `npm run lint && npm run test-unit`; `test/bench` has a `scripts.test` of `node perf && node random && node parallel`. Not scored — this is a gap in the analyzer's runner coverage, not a missing .mts/.cts runner and not a defect in this repository.
- D12 Dependency Hygiene — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. This repository's 6 package.json manifest(s) WERE read and their pinning discipline assessed; what went unanswered is the currency half, because answering it needs a lockfile resolved to CONCRETE versions and this repository commits none — a package.json states version RANGES, and a range names no particular release to be behind. So registry.npmjs.org was never asked, and there was nothing here for it to grade. This is a true statement about the repository and NOT a gap on our side: no lockfile reader we could write would find anything here to read, so there is no capability behind this row to build.
- D14 License Compliance — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Not scored — this repository declares package.json manifests but commits no lockfile this pass can resolve (npm, pnpm, yarn and bun each write a different one, and `bun.lockb` is a binary format with no published shape), so the set of packages it actually ships is not resolvable from the checkout: its declarations carry version RANGES, and grading whichever release happens to be newest today would be a verdict about a dependency graph this repository has not pinned. Commit the lock and this dimension grades its production dependencies against registry.npmjs.org. NOT a finding that this repository's licences are compliant: this dimension asserts nothing about its licensing in either direction.
- D16 Bus Factor — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Single-maintainer repository — bus factor is not applicable (245 contributor(s) across 2579 commit(s) sampled, automation and bot accounts excluded). One of them holds 84% of the history; the other 244 hold 0.1% each on average, below the 5% at which there is somebody to hand the work to. That is a single maintainer with drive-by contributors, not a team whose knowledge has concentrated — so the bus factor is not applicable and there is nothing here for the owner to act on.
- D22 Internal API Consistency — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D22 identifies the intentionally-exposed surface from `IsPackable` and `.Contracts` project names, MSBuild conventions read off the loaded project set. This target exposed no such projects, so the probe never ran; this says nothing about whether the repository has a public API. This repository commits no C#/VB source at all, so there was never an MSBuild project set to read these conventions off. That is OUR side and it is a COLLECTOR gap, not an environment fault: it declares a published package (package.json), but no published-package marker D22 reads admitted any project here, so this ecosystem's public API has no collector, and the remedy is to write one — no change to the scan image can close it.
- D26 Project Cohesion — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. Project size and spread are measured over build units whose source a code model reads. This repository's .cc source is a material share of its production lines and was read by none, so the score is a verdict about the units that were read. Not a finding that the unread source is cohesive — it is unmeasured.
- D27 Navigability — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. Tracing effort is measured over resolved call sites, and all 886 sampled here came from .js/.mjs files. This repository's .cc source is a material share of its production lines and contributed none, so the score above is a verdict about the part that was read. Not a finding that the unread half navigates well — it is unmeasured.
- D30 Dependency Vulnerabilities — measured, with a gap in what it reached — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. The scanner produced no output at all, so no dependency was actually scanned. 1 of 2 declared ecosystem(s) (npm) WERE scanned and every vulnerability they reported is included in this result; osv was not, so this dimension's score covers less than the dependency surface this repository declares, and nothing here is evidence that osv is free of known-vulnerable dependencies. osv: the scanner produced no output at all, so no dependency was actually scanned. This is reported as a measurement gap rather than a clean pass. osv-scanner documents exit 128 as "no package sources found" — but this scan only invoked it because the tree declares a source it supports (`pom.xml` and the resolved lockfiles among them), so the tool's report and this repository disagree. Check that those sources are reachable from the directory the scan ran in before concluding anything is missing. If this tree really does commit only range-pinned manifests, commit the lockfile your package manager produces — but only where your ecosystem HAS one and commits it: Maven has none at all (osv-scanner reads `pom.xml` directly) and Gradle writes one only under opt-in dependency locking, while a published Composer package and a published Dart library both deliberately exclude theirs. In those three, generate one in CI before the scan instead — a resolved dependency list or an SBOM fed to the scanner.
- D32 Data Compliance (PII/GDPR) — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. `lib/libvips.mjs`, `lib/sharp.mjs`, `lib/utility.mjs`, `npm/freebsd-wasm32/export/package.mjs`, `npm/freebsd-wasm32/export/versions.mjs`, … (+2 more) produced a parse error, so every rule in this engine's `gdpr.yml` was absent there. That absence is NOT a clean result: these rules detect personal data crossing a boundary into a log sink, a URL or browser storage, and a file that was never parsed cannot report any of the three. The rest of the tree analysed normally and its rows above stand; only these files are unaccounted for. You can widen what we reach: fix the syntax error (or exclude the file deliberately) and re-scan to cover it.
- D43 Malicious Dependencies — measured, with a gap in what it reached — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. The scanner produced no output at all, so no dependency was actually scanned. 1 of 2 declared ecosystem(s) (npm) WERE scanned and every vulnerability they reported is included in this result; osv was not, so this dimension's score covers less than the dependency surface this repository declares, and nothing here is evidence that osv is free of known-vulnerable dependencies. osv: the scanner produced no output at all, so no dependency was actually scanned. This is reported as a measurement gap rather than a clean pass. osv-scanner documents exit 128 as "no package sources found" — but this scan only invoked it because the tree declares a source it supports (`pom.xml` and the resolved lockfiles among them), so the tool's report and this repository disagree. Check that those sources are reachable from the directory the scan ran in before concluding anything is missing. If this tree really does commit only range-pinned manifests, commit the lockfile your package manager produces — but only where your ecosystem HAS one and commits it: Maven has none at all (osv-scanner reads `pom.xml` directly) and Gradle writes one only under opt-in dependency locking, while a published Composer package and a published Dart library both deliberately exclude theirs. In those three, generate one in CI before the scan instead — a resolved dependency list or an SBOM fed to the scanner.
- AXR1 Runtime accessibility — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Render strategy: boot via DevServer (dev). the dev server (`npm run dev`) exited before it served a page. Likely cause (the repository): package.json has no "dev" script, so `npm run dev` could not start the app. Last output: "npm error Missing script: "dev" / npm error / npm error To see a list of scripts, run: / npm error npm run / npm error A complete log of this run can be found in: <path>" No runtime evidence was gathered.
- C1 Data Protection — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These personal data controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks personal data controls.
- C2 Access Controls — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These authorization controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks authorization controls.
- C3 Audit Trail — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These audit controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks audit controls.
- C4 Data Retention — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These retention controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks retention controls.
- C5 Data-Subject Rights — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These data-subject rights controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks data-subject rights controls.
- P5 DR & Backup — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. No backup/snapshot/replication config, RTO/RPO or restore-procedure documentation was found — and no production persistence was detected either (no data-access packages, no data-store services, no database resources), so there is nothing in this repository whose loss a DR control would recover. If this system's data lives in a platform or ops repo we can't see, that's where the DR evidence belongs.
- X1 Async correctness — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. This check's reader does not cover every language in this repository. The score describes the part it read, which is most of the product; the rest is a gap in this analyzer's language reach.
- X12 Unreachable branch — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. This check's reader does not cover every language in this repository. The score describes the part it read, which is most of the product; the rest is a gap in this analyzer's language reach.
- X2 Cancellation propagation — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Go, PHP, Dart, Kotlin, Ruby, Scala, Java, Python and Rust source only, and no C# was loaded, and no named async function in this repository's JavaScript/TypeScript, nor any Go, PHP or Dart function or Kotlin suspend function, makes a request that can be cancelled (fetch, axios, ky, ofetch, got, undici, node:http; net/http, net.Dial; amphp; Dio; Ktor, OkHttp), so there is nothing to judge, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X21 Side-effecting pattern guard — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. This check's reader does not cover every language in this repository. The score describes the part it read, which is most of the product; the rest is a gap in this analyzer's language reach.
- X26 Unsynchronised callback handoff — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and Java, Kotlin, Scala, Go, Swift, Python and Ruby source only, and no C# was loaded, no Java, Kotlin, Scala, Go, Swift, Python or Ruby was found, and this repository's C, C++ is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X27 Collection changed while being enumerated — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and Java, Rust, Erlang, F#, Python, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded, no Java, Rust, Erlang, F#, Python, Dart, Ruby, Scala or Kotlin was found, and this repository's C++ is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X3 Exception handling — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. This check's reader does not cover every language in this repository. The score describes the part it read, which is most of the product; the rest is a gap in this analyzer's language reach.
- X4 Structured logging — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Python, PHP, Dart, Ruby, Scala and Rust source only, and no C# was loaded, and this repository's JavaScript/TypeScript, Python and PHP make no call through a named logger, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X5 Nullable reference types — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax and MSBuild project configuration, TypeScript source and its tsconfig files, Java source and its package and module declarations, PHP source and its PHPStan and Psalm configuration, Dart source and its pubspec language version, Ruby source and its Sorbet and Steep configuration, Scala source and its build's explicit-nulls, WartRemover and Scalafix settings, and Kotlin source only, and no C# was loaded, no TypeScript was found, and this repository's C, Cpp is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
Limitations & what we did not check
We assess the repository exactly as committed, and only the repository. By design we do not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.
Per-dimension blind spots
- D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
- D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
- D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
- D5 Coupling: Coupling is measured between projects/assemblies — runtime coupling through DI, reflection, messaging or shared databases is invisible to a static reference graph.
- D11 Test Reliability: Flakiness is inferred from history/markers — we run the suite once (for coverage), not the repeated runs under varied conditions that reveal nondeterminism, so a flaky test never recorded as failing is invisible here.
- D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
- D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
- D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
- D19 Documentation Quality: Documentation quality publishes two things only: a runnable or packaged unit with no example, and a multi-project root README that maps none of its parts. It does not judge clarity, and its other checks (overview, licence, boilerplate, structure, empty sections, XML-doc coverage) are withheld after adjudication: their candidates are counted in the card's gaps, not shown as rows. A false statement in a document is M4's; units are .NET projects only.
- D24 Comment Value: Comment value is measured as redundancy only: a comment that repeats its code's words is found, but a paraphrase in other words, a vague comment, or one the code contradicts is not, and whether a comment is valuable is not claimed. Comments in other scripts or languages, and outside C#, are not judged.
- D26 Project Cohesion: Project focus is sized from members/namespaces per project — a project that is broad by deliberate design reads the same as one that has sprawled.
- D27 Navigability: Indirection/navigability is structural — it measures hops to follow a call, not whether that indirection buys real flexibility or just ceremony.
- D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
- D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
- D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
- D31 IaC & Container Security: IaC scanning checks Dockerfiles/Terraform/Kubernetes against best-practice rules — it cannot see the live cloud account, runtime configuration, or drift between the committed config and what is actually deployed.
- D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
- D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
- D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
- D44 Platform End-of-Life: The support table is FROZEN, so it goes out of date by losing RECALL: a release that ended support after the table was written is missed until the table is refreshed, and this dimension reading 10 is not evidence that a platform is current. Only platforms the repository DECLARES in a place this pass reads are seen — a runtime named only in a Dockerfile (D31's subject), in a CI workflow (D29's), or in a file this pass does not parse (go.mod, a Gemfile ruby directive) is invisible here, which is why a repository declaring none of them abstains rather than scoring. Only frameworks with a PUBLISHED support policy are tracked: React, Flask and Express publish none, so their age cannot be judged and their absence from a report is not a statement that they are supported.
- AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
- P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".
- P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.
Dimensions
D1 · Cyclomatic Complexity
31 method(s) exceeded the cyclomatic complexity threshold of 15; the worst was input._createInputDescriptor at 178. A further 1 method(s) were over the threshold but excluded as flat dispatchers (a long switch/match over independent cases: many branches, almost no nesting), the largest being composite.composite at 22 — they are counted neither in the figure above nor in this dimension's score. 1 file carries no cyclomatic complexity row at all for this reason — every one of its over-threshold methods was excluded, so the exclusion is disclosed nowhere in the file itself: lib/composite.mjs (composite.composite at 22). They are named here because the per-file figures other dimensions report are taken BEFORE this exclusion, so such a file can show a high maximum complexity elsewhere in this report and nothing here, with nothing to reconcile the two.
What to do
- Bring the 1 body over 60 down to 60 or less in Cyclomatic Complexity — start with input._createInputDescriptor (cyclomatic 178). — Refactoring it lifts Cyclomatic Complexity from 2.0 to about 3.2/10.
D2 · Cognitive Complexity
50 method(s) exceeded the cognitive complexity threshold of 15; the worst was _createInputDescriptor at 473.
What to do
- Bring the 26 bodies over 15 down to 15 or less in Cognitive Complexity — start with _createInputDescriptor (cognitive 473), output.tile (cognitive 74), output.tiff (cognitive 72). — This score is capped by its worst body, so a finding fixed alone moves it by almost nothing — the next one down takes its place. Refactoring these 26 together lifts Cognitive Complexity from 2.0 to about 10.0/10, projected with the scoring formula itself and assuming each lands exactly at 15.
D3 · God Classes
3 over-large unit(s) detected — types, modules or files that carry too much.
What to do
- Resolve the 2 FunctionTooLong finding(s) in God Classes — start with input.mjs, constructor.mjs. — One of this dimension's main actionable groups (2 warning-level).
- Resolve the 1 FileTooLong finding(s) in God Classes — start with output.mjs. — One of this dimension's main actionable groups (1 warning-level).
D5 · Coupling
17 production modules (npm), 0 dependency cycle(s), 0 unstable depended-on module(s). Read from the build's own module declarations, and main-sequence distance (abstractness) is not computed for these modules yet.
D11 · Test Reliability
0 flaky across 1 measured tier(s). JavaScript/TypeScript (the plain-node harness `node --experimental-test-coverage test/unit.mjs` in the repository root, re-run per test file by exit status — coarser than per test (59 files)): measured (0 flaky).
D13 · Secret Scanning
Secret scan ran and found no leaked secrets.
D15 · Churn × Complexity Hotspots
No churn × complexity hotspots in the window.
D17 · Explicit Debt
0 deducted task-comment markers across 0 LoC (0.0/KLoC) → score 10.0. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.
D19 · Documentation Quality
2 of 2 documentation facets pass in full. 4 document(s) read across 19 unit(s).
D24 · Comment Value
3 of 190 judged comments only repeat the code they sit on (1.6 %). 75 comment(s) in another language or script were not judged.
What to do
- Resolve the 3 redundant comment finding(s) in Comment Value — start with input.mjs (2), from-local-build.js. — One of this dimension's main actionable groups (3 recommendation-level).
D26 · Project Cohesion
0 of 5 build units (npm) flagged as possibly oversized/incoherent. This repository's .cc source was read by no build unit, so this covers part of the tree, not all of it.
D27 · Navigability
0 % of calls cross a namespace and 0 % go through an interface, but 100 % of collaborators are co-located — so a call's collaborators sit together and tracing stays easy. Baseline: small — navigation cost is tolerated. Measured over the .js/.mjs source only — this repository's .cc was not sampled for call sites, so this score covers part of the tree, not all of it.
D28 · Secrets (history)
gitleaks scanned the full history AND the current working tree and found no secrets.
D29 · Static Analysis (SAST)
16 finding(s): 0 critical, 14 high, 2 medium, 0 low. semgrep hit a parse error in 7 file(s) — `lib/libvips.mjs` (line 10), `lib/sharp.mjs` (line 12), `lib/utility.mjs` (line 14), `npm/freebsd-wasm32/export/package.mjs` (line 1), `npm/freebsd-wasm32/export/versions.mjs` (line 1), … (+2 more) — so no absence of findings in the named regions is evidence of anything; rows reported elsewhere in those files are real. Fix the syntax error (or exclude the file deliberately) and re-scan to cover them. Separately, one or more rules could not re-parse an embedded snippet in 1 file(s) (e.g. a workflow `run:` block read as shell). Those files WERE scanned and their other rows are unaffected; only those rules' view of those snippets is missing.
What to do
- Resolve the 13 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED (13). — One of this dimension's main actionable groups (13 issue-level).
- Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
- Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).
D30 · Dependency Vulnerabilities
No known-vulnerable dependencies in the 1 ecosystem(s) that were scanned (npm). Partial dependency scan: 1 of 2 declared ecosystem(s) were scanned (npm), and the findings above are real and complete for them. osv was not scanned (osv: the scanner produced no output at all, so no dependency was actually scanned), so this is not the whole dependency surface and the result is reported at reduced confidence.
D31 · IaC & Container Security
trivy and checkov found no infrastructure-as-code or container misconfigurations.
D34 · Knowledge Freshness
Every significant source file has living knowledge — recently and meaningfully worked. Counted over 13 of the 30 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.
D35 · Change Coupling
No strong hidden change-coupling between production files.
D36 · Supply-chain Provenance & Signing
1/4 supply-chain integrity signals present (provenance, signing, SBOM, pinned actions).
What to do
- Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 recommendation-level).
- Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 recommendation-level).
D37 · Vulnerability-disclosure Policy
A vulnerability-disclosure policy (.github/SECURITY.md) is published with a reporting contact.
D43 · Malicious Dependencies
No known-vulnerable dependencies in the 1 ecosystem(s) that were scanned (npm). Partial dependency scan: 1 of 2 declared ecosystem(s) were scanned (npm), and the findings above are real and complete for them. osv was not scanned (osv: the scanner produced no output at all, so no dependency was actually scanned), so this is not the whole dependency surface and the result is reported at reduced confidence.
D44 · Platform End-of-Life
1 end-of-life runtime(s) and 0 end-of-life framework(s), read from 1 platform declaration(s) and 3 dependency declaration(s). This dimension reads what the repository says about ITSELF — a pinned target framework, a version file, a capped requires-python, a Rust toolchain pin, a framework major a constraint cannot move off. A FLOOR is deliberately never charged: `requires-python = ">=3.8"` states what the package SUPPORTS, not what it runs on, and a well-maintained library declares exactly that while running its own CI on a current release. The end-of-life facts are FROZEN and dated, so this dimension needs no network and answers identically inside a closed scan fence; as the table ages it loses recall and never precision, because a statement about support that ended in the past cannot become false. The OS layer of a container image is D31's question and the toolchain a CI workflow installs is D29's; this row is neither.
What to do
- Resolve the 1 End-of-life runtime finding(s) in Platform End-of-Life — start with package.json. — One of this dimension's main actionable groups (1 warning-level).
Frontend & cross-cutting dimensions
AX10 · Code composition
AX3 · Project dependency cycles
AX4 · Dependency direction
AX8 · Test isolation
GD1 · Unfinished & placeholder code
IC1 · Incompleteness & stubs
M1 · Documentation (README)
What to do
- Add a build/run (quick start) section to the root README — the first thing a newcomer needs.
- Explain in the README how to run the tests. Add a section called Testing to the README in the repository's top folder, saying how to run the test suite.
M2 · Architecture documentation
- No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
- No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.
What to do
- Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
- Add a C4 context/container diagram (Structurizr, PlantUML or Mermaid) or an architecture.md overview.
M3 · Folder & project structure
P1 · CI/CD gates
P10 · Library API & versioning
P3 · Security & performance tooling
- No static application security testing detected. For this repository's stack, add CodeQL's javascript-typescript pack, `semgrep --config=p/javascript`, or eslint-plugin-security as a CI step. What was searched, so you can tell an absence from a miss: the 2 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner. — REDACTED:7
What to do
- Add a SAST step to CI running what this repository's stack ships: CodeQL's javascript-typescript pack, `semgrep --config=p/javascript`, or eslint-plugin-security — so a security regression fails the build instead of landing.
- Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
P4 · Deployment & Rollback
P6 · Release Hygiene
PF1 · Benchmark discipline
PF3 · Async & latency hygiene
R1 · Type Safety
- 0 typed · 91 plain JS — the untyped files are install/build.js, lib/channel.mjs, lib/colour.mjs, lib/composite.mjs, lib/constructor.mjs, lib/index.mjs (+85 more).
What to do
- Adopt TypeScript for the frontend: add a typecheck step to the build, then either type-check the existing JavaScript in place (`checkJs`/JSDoc types) or convert the highest-traffic modules first — no file is typed today, so this is an adoption, not a clean-up.
R10 · Code Duplication
- lib/operation.mjs:390 · lib/resize.mjs:325 — the two spans are one implementation copied and then locally edited — 481 tokens are still identical, in the same order in both files, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one. — lib/operation.mjs:390
- lib/input.mjs:577 · lib/input.mjs:702 — all 2 copies are in the same file, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — lib/input.mjs:577
- lib/output.mjs:732 · lib/output.mjs:918 — all 2 copies are in the same file, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — lib/output.mjs:732
- lib/output.mjs:1728 · lib/output.mjs:1744 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. — lib/output.mjs:1728
- lib/operation.mjs:201 · lib/operation.mjs:215 · lib/output.mjs:1011 · lib/output.mjs:1272 · +2 more site(s) not listed — the 6 copies are spread across 2 files, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — lib/operation.mjs:201
- lib/output.mjs:1696 · lib/output.mjs:1709 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. — lib/output.mjs:1696
- lib/colour.mjs:54 · lib/colour.mjs:91 — all 2 copies are in the same file, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — lib/colour.mjs:54
- lib/input.mjs:146 · lib/input.mjs:157 — all 2 copies are in the same file, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — lib/input.mjs:146
- lib/input.mjs:234 · lib/input.mjs:341 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. — lib/input.mjs:234
- lib/input.mjs:423 · lib/input.mjs:501 — all 2 copies are in the same file, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — lib/input.mjs:423
- lib/resize.mjs:268 · lib/resize.mjs:277 — all 2 copies are in the same file, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — lib/resize.mjs:268
- lib/channel.mjs:101 · lib/operation.mjs:348 · lib/operation.mjs:412 · lib/operation.mjs:437 · +2 more site(s) not listed — the 6 copies are spread across 2 files, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — lib/channel.mjs:101
- lib/input.mjs:113 · lib/input.mjs:129 · lib/input.mjs:149 · lib/input.mjs:159 — all 4 copies are in the same file, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — lib/input.mjs:113
- lib/input.mjs:177 · lib/input.mjs:325 — all 2 copies are in the same file, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — lib/input.mjs:177
- lib/input.mjs:413 · lib/input.mjs:441 · lib/input.mjs:455 · lib/input.mjs:484 — all 4 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. — lib/input.mjs:413
- lib/input.mjs:225 · lib/input.mjs:298 · lib/input.mjs:305 · lib/input.mjs:321 · +5 more site(s) not listed — all 9 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. — lib/input.mjs:225
- lib/input.mjs:363 · lib/input.mjs:371 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. — lib/input.mjs:363
- lib/operation.mjs:821 · lib/operation.mjs:830 — all 2 copies are in the same file, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — lib/operation.mjs:821
- lib/composite.mjs:161 · lib/composite.mjs:168 · lib/input.mjs:248 · lib/output.mjs:1535 — the 4 copies are spread across 3 files, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — lib/composite.mjs:161
- lib/operation.mjs:575 · lib/output.mjs:578 · lib/output.mjs:774 · lib/output.mjs:1080 · +2 more site(s) not listed — the 6 copies are spread across 2 files, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — lib/operation.mjs:575
- lib/output.mjs:1006 · lib/resize.mjs:283 — the 2 copies are spread across 2 files, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — lib/output.mjs:1006
- npm/from-local-build.js:11 · npm/wasm-wrappers.js:14 — the two spans are one implementation copied and then locally edited — 53 tokens are still identical, in the same order in both files, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one. — npm/from-local-build.js:11
What to do
- Act on each finding's own remediation rather than one rule: the move depends on what recurs. Where the copies are executable blocks, give the shared part one home and call it from each site; where they are declarations, a listing, a specialisation already delegating to its base, or one shape repeated per entity, there is no call site and the move is a shared type, a generated set or a factory — sometimes there is nothing to extract.
R2 · Cyclomatic Complexity
- _createInputDescriptor has cyclomatic complexity 178 and cognitive complexity 473; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — lib/input.mjs:53
- tile has cyclomatic complexity 34 and cognitive complexity 74; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — lib/output.mjs:1484
- resize has cyclomatic complexity 34 and cognitive complexity 63; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — lib/resize.mjs:258
- tiff has cyclomatic complexity 33 and cognitive complexity 72; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — lib/output.mjs:1116
- heif has cyclomatic complexity 27 and cognitive complexity 70; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — lib/output.mjs:1260
- jpeg has cyclomatic complexity 24 and cognitive complexity 53; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — lib/output.mjs:615
- png has cyclomatic complexity 23 and cognitive complexity 52; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — lib/output.mjs:721
- gif has cyclomatic complexity 22 and cognitive complexity 47; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — lib/output.mjs:914
- webp has cyclomatic complexity 21 and cognitive complexity 43; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — lib/output.mjs:809
- (anonymous) has cyclomatic complexity 21 and cognitive complexity 33; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — lib/composite.mjs:136
- affine has cyclomatic complexity 20 and cognitive complexity 51; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — lib/operation.mjs:184
- sharpen has cyclomatic complexity 19 and cognitive complexity 41; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — lib/operation.mjs:282
- extend has cyclomatic complexity 18 and cognitive complexity 40; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — lib/resize.mjs:398
- jxl has cyclomatic complexity 17 and cognitive complexity 38; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — lib/output.mjs:1354
- jp2 has cyclomatic complexity 17 and cognitive complexity 36; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — lib/output.mjs:1003
- linear has cyclomatic complexity 16 and cognitive complexity 17; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — lib/operation.mjs:817
- blur has cyclomatic complexity 14 and cognitive complexity 24; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — lib/operation.mjs:381
- trySetAnimationOptions has cyclomatic complexity 13 and cognitive complexity 15; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — lib/output.mjs:1058
- trim has cyclomatic complexity 12 and cognitive complexity 29; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — lib/resize.mjs:565
- modulate has cyclomatic complexity 12 and cognitive complexity 19; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — lib/operation.mjs:936
R3 · Large Files
- lib/output.mjs has 1763 significant lines (blank lines excluded), over the 400-line bar, and contains logic — a file this long is usually several responsibilities in one module. — lib/output.mjs:1
- lib/operation.mjs has 972 significant lines (blank lines excluded), over the 400-line bar, and contains logic — a file this long is usually several responsibilities in one module. — lib/operation.mjs:1
- lib/input.mjs has 810 significant lines (blank lines excluded), over the 400-line bar, and contains logic — a file this long is usually several responsibilities in one module. — lib/input.mjs:1
- lib/resize.mjs has 602 significant lines (blank lines excluded), over the 400-line bar, and contains logic — a file this long is usually several responsibilities in one module. — lib/resize.mjs:1
- lib/constructor.mjs has 504 significant lines (blank lines excluded), over the 400-line bar, and contains logic — a file this long is usually several responsibilities in one module. — lib/constructor.mjs:1
What to do
- Split each oversized file along the responsibilities already in it, into smaller focused modules in the same package.
R6 · Tooling
- test ✓ · lint ✓ · typecheck ✗ — read from this repository's package.json scripts and corroborated against its CI workflows. A script counts when its name or command matches the step: `test` for the suite, `lint` or `prettier` for linting, `typecheck`/`type-check`/`tsc` for type checking. ✗ therefore means no script or CI step under those names was found, NOT that the step is absent from your pipeline — a task invoked by a runner this check does not read, or named something else entirely, is not seen and is worth confirming before acting on a cross. A ✓ means the wiring is DECLARED — a script or CI step under those names exists. It is not a statement that the step passes, or that it runs at all: nothing here installs a dependency or executes a suite.
What to do
- Add type checking (adopt TypeScript, or type-check the existing JavaScript with `checkJs`) as package.json scripts and run them in CI.
R7 · Dead Code
- Unreachable from the 91 application, 2 tooling and 66 test entry point(s) detected in this repo. Gate removals on `npm run build` — an undetected custom entry would make these reachable.
- no import path from any entry point (91 application, 2 tooling, 66 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make — src/emscripten/pre.js
R8 · Dependency Hygiene
R9 · Circular Imports
S1 · Web-Security Posture
- Set: X-Content-Type-Options, X-Frame-Options. Missing: Content-Security-Policy, Strict-Transport-Security — the four headers that carry the points of this card's security-headers term (Content-Security-Policy, Strict-Transport-Security, X-Content-Type-Options, X-Frame-Options), 0.5 each. (−1.0 on this card.) — docs/firebase.json:1
What to do
- Add Content-Security-Policy, Strict-Transport-Security beside the headers already set; Content-Security-Policy is the one that pays for itself first, then Strict-Transport-Security, then nosniff and a frame policy.
X1 · Async correctness
- `forEach` ignores what its callback returns, so the Promise each `async` call returns is dropped: nothing can await it, the code after this loop runs before any of the awaited work has finished (a function that `await`s around this loop still returns early), and a rejection is never handled — in Node.js an unhandled rejection terminates the process by default, and in a browser it is lost. Iterate with `for (const item of items) { await … }` when the work must run in order, or `await Promise.all(items.map(async (item) => { … }))` when it may run concurrently, so the enclosing function finishes only when the work does and its failures reach the caller. Where firing and forgetting is genuinely intended, make the callback's whole body a `try { … } catch (e) { … }` that handles the failure, so it cannot escape. — docs/build.mjs:22
What to do
- `async` callback passed to `forEach`
X12 · Unreachable branch
X21 · Side-effecting pattern guard
X3 · Exception handling
- An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it. (×10) — lib/is.mjs:114, lib/libvips.mjs:58, lib/libvips.mjs:66, …
What to do
- Swallowed exception (empty catch)
Reference — by lens
| Lens | Score | Rating | Impact |
|---|---|---|---|
| Code Health | 37% | Weak — gated by D1, D2, R1, R3, X1, X3 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Architecture | 100% | Exemplary | Strongest area. |
| Maturity | 52% | Adequate — gated by M2 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Readiness | 70% | Adequate — gated by P3 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Security | 76% | Adequate — gated by D29, D36 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Performance | 91% | Exemplary | Solid. |
Unscored — 1 check(s) recorded observations but carry no score
- SC1 Supply-chain hygiene — 4 observation(s) recorded · Advisory — this card reports evidence and never carries a score.
Not evidenced — 4 control(s) we could not find positive evidence for
- C3 Audit Trail — Not assessed: these audit controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks audit controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C4 Data Retention — Not assessed: these retention controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks retention controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C5 Data-Subject Rights — Not assessed: these data-subject rights controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks data-subject rights controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
Not included — 73 check(s) not relevant to this codebase
- AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
- AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
- AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
- AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
- AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
- AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
- AX1 Captive dependencies — Not applicable: this repository's JavaScript imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's.
- AX2 Stateful singletons — Not applicable: TypeScript/JavaScript runs each process's requests on one event loop, so no two requests write a shared object at the same instant (interleaving across an await is a different defect).
- AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX6 Interface segregation — not applicable — JavaScript has no interface declaration, so there is no declared member list whose width this check could measure
- AX7 Slice cohesion — not applicable — not a vertical-slice architecture
- AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
- AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- AXR1 Runtime accessibility — the dev server (`npm run dev`) exited before it served a page. Likely cause (the repository): package.json has no "dev" script, so `npm run dev` could not start the app. Last output: "npm error Missing script: "dev" / npm error / npm error To see a list of scripts, run: / npm error npm run / npm error A complete log of this run can be found in: <path>" No runtime evidence was gathered. This is a statement about this run, not a statement about your application: nothing here says the surface is inaccessible, only that it was never rendered.
- C1 Data Protection — Not assessed: these personal data controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks personal data controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C2 Access Controls — Not assessed: these authorization controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks authorization controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- D10 Test Quality — ~1444 lines of test source are present (.mts, .cts) but no test cases reached the test census for this repository — no test root we could resolve declared them, or the files we read declare no cases in a test framework we recognise — so skipped/assertion-free tests couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
- D12 Dependency Hygiene — Dependency currency not established — this repository commits no lockfile to resolve
- D14 License Compliance — npm licences not graded — this npm repository commits no lockfile this pass can resolve
- D16 Bus Factor — single-maintainer repository — bus factor is not applicable
- D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
- D20 ADR Quality — N/A — ADRs are expected on deployable products with a user-facing host, not consumed libraries; no ADR log is required here.
- D21 Naming Consistency — N/A — too few peers to establish a naming convention (342 declarations, no unit with a dominant convention).
- D22 Internal API Consistency — The exposed public-API surface could not be collected — no C#/VB projects loaded.
- D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ sibling projects each declaring an entity of their own or taking another project's integration events. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
- D25 ADR Conformance — no ADRs to check
- D32 Data Compliance (PII/GDPR) — 7 file(s) were not parsed by semgrep — the PII/GDPR ruleset never ran over them
- D4 Code Duplication — Duplication not measured — .cc not exposed to the token comparison
- D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
- D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
- D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
- D6 Cohesion (LCOM4) — No production classes were analyzable, so cohesion (LCOM4) was not measured (the solution likely failed to load or has no production code).
- D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
- D8 Code Coverage — Coverage not measured — the test script invokes plain node, which the collector cannot instrument
- DM1 Domain Modelling — not scored — this repository shows none of the 3 signals this lens looks for
- ED1 Event-Driven — not scored — this repository shows none of the 3 signals this lens looks for
- ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
- ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
- M4 Documentation accuracy — Not applicable: the 4 current-state document(s) make no claim of a kind M4 checks. 21 claim(s) of kinds M4 does not check were not checked (command argument 1, install 11, environment variable 7, package 1, cd 1); M4 checks only links and versions and artefact counts.
- P12 CI test-gate honesty — Reported, not scored — and nothing was matched here. The coverage check applies to any stack, and the automatic-re-run check to any GitHub-Actions workflow, but the checks for excluded tests, skipped tests and sleep-based synchronisation currently recognise only some ecosystems' test-runner idioms, so on a repository built with another stack the zeros below mean 'not checked', not 'clean'.
- P2 Observability — This repository's JavaScript/TypeScript source (5 module(s), 31 file(s) read) declares no entry point and bootstraps no server, and nothing here deploys a service — it is a library, run inside whatever hosts it, so production observability (structured logging, tracing/metrics, health checks) is N/A. If it grows a binary or a service, the dimension reactivates.
- P7 Outbound HTTP resilience — not applicable — no HTTP server, API framework or worker entry point was found in the JavaScript/TypeScript source, so there is no service whose uptime a failing dependency could take down
- P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
- P9 Domain vs controller coverage — coverage not measured: this check compares the coverage of the analyzer's own test run across the domain and web layers, and that run measured none here — Test coverage (D8) says why
- PF2 Allocation hygiene — Not scored: this check counted allocation-aware idioms (Span, pools, stackalloc) per line, which describes what kind of code a repository is rather than whether it has an allocation problem, so it was withdrawn. Nothing here is a finding about your code.
- R11 Import Boundaries — No recognizable feature-sliced/layered src layout — boundary rules not applicable.
- R4 Test Coverage — 66 test file(s) reach none of 28 production file(s) via imports — exercised outside the JS import graph (integration/bundled), not import-reachable
- R5 Dependency Freshness — no package-lock.json — dependency freshness not measured (would require an npm lockfile); JS/npm CVEs are scored in D30 (Dependency Vulnerabilities), which answers every ecosystem
- X10 Duplicated predicate — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X13 Undrained process stream — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X14 Bypassable address classification — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X15 Unvalidated length from an untrusted reader — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X16 Unfloored truncation loop — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X17 Uncapped recursion over a caller-supplied document — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X18 Disposal-pattern correctness — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X19 Unrestored process-global state — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X2 Cancellation propagation — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X20 Mistyped argument guard — This check asks whether an argument guard reports an EMPTY value as a NULL one, which needs a language that throws a null-specific argument exception — .NET's ArgumentNullException, the JVM's NullPointerException, Dart's ArgumentError.notNull. This repository contains none of those languages: the ones it is written in have a single exception for a bad argument, so there is no pair of exceptions to confuse and nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
- X22 Contradicted release guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X23 Unguarded diagnostic materialisation — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X24 Document value interpolated into markup unescaped — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X25 Inert configuration knob — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X26 Unsynchronised callback handoff — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X27 Collection changed while being enumerated — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X28 Index access outside its own emptiness guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X29 Per-element action decided by a fixed element — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X30 Support guard that admits what it rejects — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
- X4 Structured logging — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X5 Nullable reference types — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X7 Silent fallback defaults — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Appendix A — Findings (grouped)
Critical — 14 finding(s)
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
Serious — 114 finding(s)
- Swallowed exception (empty catch) lib/is.mjs:114
- Swallowed exception (empty catch) lib/libvips.mjs:58
- Swallowed exception (empty catch) lib/libvips.mjs:66
- Swallowed exception (empty catch) lib/libvips.mjs:76
- Swallowed exception (empty catch) lib/libvips.mjs:113
- Swallowed exception (empty catch) lib/libvips.mjs:146
- Swallowed exception (empty catch) lib/libvips.mjs:156
- Swallowed exception (empty catch) lib/sharp.mjs:150
- Swallowed exception (empty catch) lib/utility.mjs:72
- Swallowed exception (empty catch) lib/utility.mjs:77
- Duplicated block (9 lines × 2 locations) lib/input.mjs:146
- Duplicated block (9 lines × 2 locations) lib/input.mjs:234
- Duplicated block (9 lines × 2 locations) lib/input.mjs:423
- Duplicated block (9 lines × 2 locations) lib/resize.mjs:268
- JavaScript dependencies are not locked docs/package.json:13
- JavaScript dependencies are not locked npm/package.json:5
- JavaScript dependencies are not locked package.json:161
- JavaScript dependencies are not locked test/bench/package.json:10
- FunctionTooLong: input._createInputDescriptor lib/input.mjs:53
- FunctionTooLong: constructor.Sharp lib/constructor.mjs:224
- Duplicated block (13 lines × 2 locations) lib/output.mjs:732
- Duplicated block (13 lines × 2 locations) lib/output.mjs:1728
- Duplicated block (8 lines × 4 locations) lib/input.mjs:113
- Duplicated block (8 lines × 4 locations) lib/input.mjs:413
- Duplicated block (7 lines × 2 locations) lib/input.mjs:363
- Duplicated block (7 lines × 2 locations) lib/operation.mjs:821
- input._createInputDescriptor (cyclomatic 178) lib/input.mjs:53
- resize.resize (cyclomatic 34) lib/resize.mjs:258
- output.tile (cyclomatic 34) lib/output.mjs:1484
- output.tiff (cyclomatic 33) lib/output.mjs:1116
- output.heif (cyclomatic 27) lib/output.mjs:1260
- output.jpeg (cyclomatic 24) lib/output.mjs:615
- output.png (cyclomatic 23) lib/output.mjs:721
- output.gif (cyclomatic 22) lib/output.mjs:914
- composite (cyclomatic 22) lib/composite.mjs:132
- operation.affine (cyclomatic 21) lib/operation.mjs:184
- output.webp (cyclomatic 21) lib/output.mjs:809
- operation.sharpen (cyclomatic 19) lib/operation.mjs:282
- resize.extend (cyclomatic 18) lib/resize.mjs:398
- output.jp2 (cyclomatic 17) lib/output.mjs:1003
- output.jxl (cyclomatic 17) lib/output.mjs:1354
- operation.linear (cyclomatic 16) lib/operation.mjs:817
- _createInputDescriptor (cognitive 473) lib/input.mjs:53
- output.tile (cognitive 74) lib/output.mjs:1484
- output.tiff (cognitive 72) lib/output.mjs:1116
- output.heif (cognitive 70) lib/output.mjs:1260
- resize.resize (cognitive 63) lib/resize.mjs:258
- operation.affine (cognitive 53) lib/operation.mjs:184
- output.jpeg (cognitive 53) lib/output.mjs:615
- output.png (cognitive 52) lib/output.mjs:721
- output.gif (cognitive 47) lib/output.mjs:914
- output._pipeline (cognitive 46) lib/output.mjs:1664
- output.webp (cognitive 43) lib/output.mjs:809
- operation.sharpen (cognitive 41) lib/operation.mjs:282
- resize.extend (cognitive 40) lib/resize.mjs:398
- jxl (cognitive 38) lib/output.mjs:1354
- output.jp2 (cognitive 36) lib/output.mjs:1003
- composite (cognitive 34) lib/composite.mjs:132
- resize.trim (cognitive 29) lib/resize.mjs:565
- input.metadata (cognitive 24) lib/input.mjs:653
- input.stats (cognitive 24) lib/input.mjs:750
- blur (cognitive 24) lib/operation.mjs:381
- output.withExif (cognitive 23) lib/output.mjs:264
- operation.modulate (cognitive 19) lib/operation.mjs:936
- output.withMetadata (cognitive 19) lib/output.mjs:530
- operation.clahe (cognitive 17) lib/operation.mjs:665
- linear (cognitive 17) lib/operation.mjs:817
- operation.normalise (cognitive 16) lib/operation.mjs:600
- REDACTED
- REDACTED
- FileTooLong: lib/output.mjs lib/output.mjs
- REDACTED
- End-of-life runtime: Node.js 20 npm/win32-ia32/package.json:32
- Type Safety
- Duplicated block with local edits (65 matched lines × 2 locations) lib/operation.mjs:390
- Duplicated block (51 lines × 2 locations) lib/input.mjs:577
- Duplicated block (12 lines × 6 locations) lib/operation.mjs:201
- Duplicated block (11 lines × 2 locations) lib/output.mjs:1696
- Duplicated block (10 lines × 2 locations) lib/colour.mjs:54
- Duplicated block (8 lines × 6 locations) lib/channel.mjs:101
- Duplicated block (8 lines × 2 locations) lib/input.mjs:177
- Duplicated block (7 lines × 9 locations) lib/input.mjs:225
- Duplicated block (6 lines × 4 locations) lib/composite.mjs:161
- Duplicated block (6 lines × 6 locations) lib/operation.mjs:575
- Duplicated block (6 lines × 2 locations) lib/output.mjs:1006
- Duplicated block with local edits (6 matched lines × 2 locations) npm/from-local-build.js:11
- Complex function _createInputDescriptor (cyclomatic 178, cognitive 473) lib/input.mjs:53
- Complex function tile (cyclomatic 34, cognitive 74) lib/output.mjs:1484
- Complex function resize (cyclomatic 34, cognitive 63) lib/resize.mjs:258
- Complex function tiff (cyclomatic 33, cognitive 72) lib/output.mjs:1116
- Complex function heif (cyclomatic 27, cognitive 70) lib/output.mjs:1260
- Complex function jpeg (cyclomatic 24, cognitive 53) lib/output.mjs:615
- Complex function png (cyclomatic 23, cognitive 52) lib/output.mjs:721
- Complex function gif (cyclomatic 22, cognitive 47) lib/output.mjs:914
- Complex function webp (cyclomatic 21, cognitive 43) lib/output.mjs:809
- Complex function (anonymous) (cyclomatic 21, cognitive 33) lib/composite.mjs:136
- Complex function affine (cyclomatic 20, cognitive 51) lib/operation.mjs:184
- Complex function sharpen (cyclomatic 19, cognitive 41) lib/operation.mjs:282
- Complex function extend (cyclomatic 18, cognitive 40) lib/resize.mjs:398
- Complex function jxl (cyclomatic 17, cognitive 38) lib/output.mjs:1354
- Complex function jp2 (cyclomatic 17, cognitive 36) lib/output.mjs:1003
- Complex function linear (cyclomatic 16, cognitive 17) lib/operation.mjs:817
- Complex function blur (cyclomatic 14, cognitive 24) lib/operation.mjs:381
- Complex function trySetAnimationOptions (cyclomatic 13, cognitive 15) lib/output.mjs:1058
- Complex function trim (cyclomatic 12, cognitive 29) lib/resize.mjs:565
- Complex function modulate (cyclomatic 12, cognitive 19) lib/operation.mjs:936
- lib/output.mjs: 1763 lines of code lib/output.mjs:1
- lib/operation.mjs: 972 lines of code lib/operation.mjs:1
- lib/input.mjs: 810 lines of code lib/input.mjs:1
- lib/resize.mjs: 602 lines of code lib/resize.mjs:1
- lib/constructor.mjs: 504 lines of code lib/constructor.mjs:1
- No typecheck script
- Dead file (~21 LoC) src/emscripten/pre.js
- `async` callback passed to `forEach` docs/build.mjs:22
Minor — 11 finding(s)
- redundant comment lib/input.mjs:142
- redundant comment lib/input.mjs:154
- redundant comment npm/from-local-build.js:48
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- No ADRs
- No architecture diagram/doc
- No SAST REDACTED:7
- Security headers incomplete docs/firebase.json:1
Minor — 2 finding(s)
- Dependency hygiene PARTLY measured — npm pinning read, dependency currency not (no committed lockfile, so no resolved version to grade)
- doc comments repeat the names lib/colour.mjs:10
Appendix B — Reproduction & audit trail
| Dimension | Tool | Version | Command | Findings | Raw output |
|---|---|---|---|---|---|
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-4c303ee53cdd4d548198dfa51b02f172/history.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-4c303ee53cdd4d548198dfa51b02f172/tree.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-tree.json |
| D29 · Static Analysis (SAST) | semgrep | — | semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/canine-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off --exclude *.arrow --exclude *.avro --exclude *.csv --exclude *.dat --exclude *.db --exclude *.feather --exclude *.geojson --exclude *.h5 --exclude *.hdf5 --exclude *.jsonl --exclude *.log --exclude *.ndjson --exclude *.npy --exclude *.npz --exclude *.orc --exclude *.parquet --exclude *.pickle --exclude *.pkl --exclude *.psv --exclude *.sqlite --exclude *.sqlite3 --exclude *.tfrecord --exclude *.tsv --exclude *.txt . | 16 | artifacts/raw/semgrep.json |
| D30 · Dependency Vulnerabilities | osv-scanner | — | osv-scanner --format json --recursive --experimental-disable-plugins transitivedependency/requirements --experimental-disable-plugins dotnet/csproj --experimental-disable-plugins dotnet/nugetcpm . | 0 | — |
| D30 · Dependency Vulnerabilities | trivy | — | trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs **/bin/** --skip-dirs **/obj/** . | 0 | artifacts/raw/trivy-fs.json |
| D31 · IaC & Container Security | trivy | — | trivy config --format json --quiet . | 0 | artifacts/raw/trivy-config.json |
| D32 · Data Compliance (PII/GDPR) | semgrep | — | semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that. semgrep could not parse 7 file(s) — `lib/libvips.mjs`, `lib/sharp.mjs`, `lib/utility.mjs`, `npm/freebsd-wasm32/export/package.mjs`, `npm/freebsd-wasm32/export/versions.mjs`, … (+2 more) — so the PII/GDPR sweep did not cover the unparsed regions of them; rows reported elsewhere in those files are real. | 0 | — |
| D40 · Network Egress Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here. | 0 | — |
| D41 · Kernel & Syscall Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here. | 0 | — |
| D42 · Runtime Threat Enforcement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here. | 0 | — |
| D43 · Malicious Dependencies | osv-scanner | — | osv-scanner --format json --recursive --experimental-disable-plugins transitivedependency/requirements --experimental-disable-plugins dotnet/csproj --experimental-disable-plugins dotnet/nugetcpm . | 0 | — |
| D43 · Malicious Dependencies | trivy | — | trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs **/bin/** --skip-dirs **/obj/** . | 0 | artifacts/raw/trivy-fs.json |