Executive summary
kant2002/FSharpPacker falls short of our standard for production because we found no logging, tracing or health checks in the code and no automated security scanning of the code, its secrets or its dependencies. It scores 47 out of 100 and is rated Weak, and all three of its critical findings are security problems in the build pipeline and in its servers and containers.
Production Readiness, at 37, is the weakest lens and counts most in the score. The best first step is recording design decisions, worth about 8 points. Adding a diagnostic log would lift Production Readiness itself, worth about 5 points. Raising Production Readiness to 70 would lift the score to about 55.
Two pipeline tools are referenced by a changeable name, so the build pipeline can be tampered with. One setting leaves the servers or containers unsafe. Pinning each tool to an exact version and correcting the unsafe settings would close both risks.
The product code is 336 lines, too few for a meaningful rebuild estimate.
If Production Readiness rose from 37 to 70, the lowest score rated Strong, the score would rise from 47 to about 55.
New since the last survey: 2 findings
- Platform End-of-Life · End-of-life runtime: .NET net6.0 FSharpPacker.FSharp/FSharpPacker.FSharp.fsproj
- Platform End-of-Life · End-of-life runtime: .NET net6.0 FSharpPacker.Tests/FSharpPacker.Tests.csproj
Fixed since the last survey: 1 finding
- Platform End-of-Life · End-of-life runtime: .NET net6.0 FSharpPacker.Tests/FSharpPacker.Tests.csproj
Top priorities
Diagnosis: what the measurements show together
Architecture — module dependency graph
Architecture: which parts of the code depend on which
| uses → | 1 FSharpPacker.Program | 2 Packer | 3 FSharpPacker |
|---|---|---|---|
| 1 FSharpPacker.Program | |||
| 2 Packer | |||
| 3 FSharpPacker | 2 |
3→2 FSharpPacker uses Packer✕
- Connections
- 2 pairs of types, where a type in FSharpPacker uses a type in Packer.
- The types involved
FSharpPacker.FsxPreprocessor→Packer.NugetReferenceFSharpPacker.FsxPreprocessor→Packer.SourceFile
- Direction
- FSharpPacker uses Packer, so a change to Packer can break FSharpPacker, while a change to FSharpPacker can't break Packer.
- Position
- Below the diagonal: FSharpPacker uses a module listed above it, which is the healthy direction.
At a glance — Code Health
At a glance — Architecture
At a glance — Maturity
At a glance — Readiness
At a glance — Security
Security & Compliance — OWASP Top-10 mapping
| OWASP category | Findings | Severity |
|---|---|---|
| A05:2025 — Injection | 5 | High / Critical |
| A02:2025 — Security Misconfiguration | 3 | High / Critical |
Roadmap
Top priorities: Resolve the 1 No ADRs found finding(s) in ADR Quality — start with FSharpPacker.FSharp.fsproj; Resolve the 3 Orphaned file finding(s) in Knowledge Freshness — start with Packer.fs, Program.fs, FsxPrepocessor.fs; Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
| Do this | Helps | Effort | Dimension |
|---|---|---|---|
| Resolve the 1 No ADRs found finding(s) in ADR Quality — start with FSharpPacker.FSharp.fsproj. | +7.9 pts | Low | ADR Quality |
| Resolve the 3 Orphaned file finding(s) in Knowledge Freshness — start with Packer.fs, Program.fs, FsxPrepocessor.fs. | +6.6 pts | Low | Knowledge Freshness |
| Resolve the 2 Deprecated finding(s) in Dependency Hygiene. | +3.6 pts | Low | Dependency Hygiene |
| Resolve the 1 Orphaned files with no living knowledge finding(s) in Knowledge Freshness. | +3.1 pts | Low | Knowledge Freshness |
| Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them. | +5.5 pts | Medium | Architecture documentation |
| Write a diagnostic trail the user can hand back with a bug report: a log file under the platform's per-user data directory, switchable with a `--verbose`/`--debug` flag. Start with the error paths that emit nothing — a discarded error is the failure the user cannot describe and you cannot reproduce. | +5.5 pts | Medium | Observability |
| Resolve the 1 Outdated finding(s) in Dependency Hygiene — start with FSharpPacker.Tests.csproj. | +2.1 pts | Low | Dependency Hygiene |
| Nothing pauses a release for a human: publish as a draft release (or gate the release job on a protected tag/manual dispatch) so a bad build can be stopped before users can download it. | +2.6 pts | Medium | Deployment & Rollback |
File quality
| File | Score | Band | Worst signal |
|---|---|---|---|
| REDACTED | 1.9 | Slop | Static Analysis (SAST): High: REDACTED |
| REDACTED | 4.1 | Mixed | IaC & Container Security: High IaC: REDACTED |
| FSharpPacker.Tests/FSharpPacker.Tests.csproj | 7.4 | Mixed | Platform End-of-Life: End-of-life runtime: .NET net6.0 |
| FSharpPacker.FSharp/FSharpPacker.FSharp.fsproj | 7.4 | Mixed | Platform End-of-Life: End-of-life runtime: .NET net6.0 |
| FSharpPacker.FSharp/Program.fs | 7.8 | Mixed | Cyclomatic Complexity: Program.main (cyclomatic 17) |
| FSharpPacker.FSharp/Packer.fs | 7.8 | Mixed | Cyclomatic Complexity: Packer.classifyLine (cyclomatic 17) |
How the grades work
A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.
Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.
Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.
Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.
Methodology & how to trust this report
This survey is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. All 36 evaluated dimensions are computed by tools and static analysis; no language model sets or judges any of them. Overall confidence is 0.9, the weighted average across measured dimensions.
What we checked — 36 dimensions across the health lenses
- Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 22 of 38 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line.
- Is there a tool behind the number? Every score below names the method that produced it: Roslyn, git or a scanner, not a narrative.
- Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.
Tools & methods
| Method | Backs | Version | Evaluator |
|---|---|---|---|
| Roslyn static analysis | Complexity, cohesion, coupling, dead code, API surface, layering | 5.3.0 | ✓ deterministic |
| Native secret scanner | Hardcoded secrets / credentials | 1.0.0 | ✓ deterministic |
| Canine Code Analyzer duplication detector (in-process) | Code duplication | 1.0.0 | ✓ deterministic |
| Coverage (coverlet / dotnet-coverage) | Line & branch coverage | 10.0.400 | ✓ deterministic |
| NuGet / dotnet | Outdated, vulnerable & deprecated dependencies | 10.0.400 | ✓ deterministic |
| git / LibGit2Sharp | Churn hotspots, knowledge concentration, history | 2.43.0 · 0.31.0 | ✓ deterministic |
| gitleaks · semgrep · trivy · checkov | Secrets in history, SAST, CVEs, IaC & container, PII / GDPR | 1.86.0 · 0.69.3 · 3.2.533 | ✓ deterministic |
Run transparency — what happened this run
- D8 Code Coverage — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Coverage NOT MEASURED: the test suite could not be built/run in-image (commonly external-service dependencies — a database, a broker — we won't provision). To have it measured, make the suite runnable without them. For context only, test code is ≈ 65% of production LoC (219 test / 336 production) — a rough proxy, NOT a coverage measurement, so it is excluded from the score. You can widen what we reach: optional: make the suite runnable without a database, broker or other service we do not provision, and real coverage is measured on the next scan.
- D11 Test Reliability — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Test reliability NOT MEASURED: the test run produced no results for any test tier, so no test ever ran and flakiness could not be exercised. The cause could not be attributed, so it is excluded from the score rather than read as an absence of tests.
- D16 Bus Factor — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Single-maintainer repository — bus factor is not applicable (4 contributor(s) across 50 commit(s) sampled, automation and bot accounts excluded). One of them holds 88% of the history; the other 3 hold 4% each on average, below the 5% at which there is somebody to hand the work to. That is a single maintainer with drive-by contributors, not a team whose knowledge has concentrated — so the bus factor is not applicable and there is nothing here for the owner to act on.
- D17 Explicit Debt — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. The C# workspace loaded this repository's projects but reported a load failure, and the dead-code reference search is unreliable over a graph that did not load cleanly, so it was skipped. The other debt markers on this row were read; dead symbols were not, and their absence from the score is not a finding that the code has none. First load diagnostic: Failure: Cannot open project 'FSharpPacker.FSharp/FSharpPacker.FSharp.fsproj' because the file extension '.fsproj' is not associated with a language.
- D17 Explicit Debt — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. The 0 deducted marker(s) and the 0.0/KLoC density on this row were taken over this repository's .NET projects ALONE: .fs (336 lines, 100% of production source) went unread, because every marker collector on this path is reached through a C# workspace. D17's marker collectors need a compiler we do not have for that language, so none of its nine marker kinds were read there. The debt in that source is UNMEASURED — its absence from the score above is a gap in this analyzer's language coverage, not a finding that the code carries none.
- D22 Internal API Consistency — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. The loaded project set declares no packable project and no `.Contracts` project, so there is no intentionally-exposed surface for API consistency to be judged over.
- D24 Comment Value — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Each source language's comment syntax, and the code a comment annotates in it, needs its own proof before D24 judges it. Until then those comments are left unread, not counted as clean.
- AX6 Interface segregation — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is computed over the public interfaces this run's compilations declare, and none was loaded, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- AXR1 Runtime accessibility — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Render strategy: boot via REDACTED (REDACTED). the image ran but published no HTTP port — nothing to crawl (EXPOSE the web port to unlock runtime evidence).
- C1 Data Protection — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These personal data controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks personal data controls.
- C2 Access Controls — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These authorization controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks authorization controls.
- C3 Audit Trail — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These audit controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks audit controls.
- C4 Data Retention — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These retention controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks retention controls.
- C5 Data-Subject Rights — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These data-subject rights controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks data-subject rights controls.
- P5 DR & Backup — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. No backup/snapshot/replication config, RTO/RPO or restore-procedure documentation was found — and no production persistence was detected either (no data-access packages, no data-store services, no database resources), so there is nothing in this repository whose loss a DR control would recover. If this system's data lives in a platform or ops repo we can't see, that's where the DR evidence belongs.
- S1 Web-Security Posture — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These web-security controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks web-security controls.
- X1 Async correctness — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X12 Unreachable branch — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X13 Undrained process stream — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X14 Bypassable address classification — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X15 Unvalidated length from an untrusted reader — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X16 Unfloored truncation loop — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X17 Uncapped recursion over a caller-supplied document — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X18 Disposal-pattern correctness — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X19 Unrestored process-global state — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X2 Cancellation propagation — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X21 Side-effecting pattern guard — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X22 Contradicted release guard — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X24 Document value interpolated into markup unescaped — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X25 Inert configuration knob — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X26 Unsynchronised callback handoff — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X29 Per-element action decided by a fixed element — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X3 Exception handling — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X30 Support guard that admits what it rejects — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X32 Type resolved by simple name across every loaded assembly — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X4 Structured logging — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X5 Nullable reference types — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
Limitations & what we did not check
We assess the repository exactly as committed, and only the repository. By design we do not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.
Per-dimension blind spots
- D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
- D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
- D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
- D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
- D5 Coupling: Coupling is measured between projects/assemblies — runtime coupling through DI, reflection, messaging or shared databases is invisible to a static reference graph.
- D6 Cohesion (LCOM4): LCOM4 cohesion is syntactic — it infers connectivity from which methods touch which fields/methods by name, not from real runtime behaviour or intent.
- D10 Test Quality: Assertion density is structural — it cannot tell a meaningful behavioural assertion from a trivial one, only that an assertion is present.
- D12 Dependency Hygiene: Dependency health reads manifests and lockfiles — a vulnerability in a vendored/copied dependency, or risk from how a dependency is actually used, is outside this view.
- D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
- D14 License Compliance: License compatibility is checked against declared package metadata and a policy — mislabelled or missing license metadata, and obligations that depend on how you distribute, are not resolved here.
- D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
- D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
- D19 Documentation Quality: Documentation quality publishes two things only: a runnable or packaged unit with no example, and a multi-project root README that maps none of its parts. It does not judge clarity, and its other checks (overview, licence, boilerplate, structure, empty sections, XML-doc coverage) are withheld after adjudication: their candidates are counted in the card's gaps, not shown as rows. A false statement in a document is M4's; units are .NET projects only.
- D20 ADR Quality: ADR quality checks the structure of the decision records present: it cannot know about decisions made and never recorded, and it does not judge how well a record argues its case. Records in a language the section lexicon does not cover are not evaluated.
- D27 Navigability: Indirection/navigability is structural — it measures hops to follow a call, not whether that indirection buys real flexibility or just ceremony.
- D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
- D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
- D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
- D31 IaC & Container Security: IaC scanning checks Dockerfiles/Terraform/Kubernetes against best-practice rules — it cannot see the live cloud account, runtime configuration, or drift between the committed config and what is actually deployed.
- D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
- D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
- D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
- D44 Platform End-of-Life: The support table is FROZEN, so it goes out of date by losing RECALL: a release that ended support after the table was written is missed until the table is refreshed, and this dimension reading 10 is not evidence that a platform is current. Only platforms the repository DECLARES in a place this pass reads are seen — a runtime named only in a REDACTED (D31's subject), in a CI workflow (D29's), or in a file this pass does not parse (go.mod, a Gemfile ruby directive) is invisible here, which is why a repository declaring none of them abstains rather than scoring. Only frameworks with a PUBLISHED support policy are tracked: React, Flask and Express publish none, so their age cannot be judged and their absence from a report is not a statement that they are supported.
- AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
- P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".
- P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.
Dimensions
D1 · Cyclomatic Complexity
2 method(s) exceeded the cyclomatic complexity threshold of 15; the worst was Program.main at 17.
What to do
- Bring the 2 bodies over 15 down to 15 or less in Cyclomatic Complexity — start with Program.main (cyclomatic 17), Packer.classifyLine (cyclomatic 17). — This score is capped by its worst body, so a finding fixed alone moves it by almost nothing — the next one down takes its place. Refactoring these 2 together lifts Cyclomatic Complexity from 9.5 to about 10.0/10, projected with the scoring formula itself and assuming each lands exactly at 15.
D2 · Cognitive Complexity
2 method(s) exceeded the cognitive complexity threshold of 15; the worst was Packer.classifyLine at 31.
What to do
- Bring the 2 bodies over 15 down to 15 or less in Cognitive Complexity — start with Packer.classifyLine (cognitive 31), Program.main (cognitive 17). — This score is capped by its worst body, so a finding fixed alone moves it by almost nothing — the next one down takes its place. Refactoring these 2 together lifts Cognitive Complexity from 8.1 to about 10.0/10, projected with the scoring formula itself and assuming each lands exactly at 15.
D3 · God Classes
0 god class(es) detected.
D4 · Code Duplication
0 duplicated block group(s) detected. 0.0 % of the production lines (0 of 336) are in a reported copy.
D5 · Coupling
1 projects, 0 dependency cycle(s), 0 unstable depended-on project(s).
D6 · Cohesion (LCOM4)
0 of 2 classes have LCOM4 above 3.
D10 · Test Quality
0 skipped, 0 zero-assertion, no mocking-framework packages referenced (hand-written doubles or no mocking) across 18 tests.
D12 · Dependency Hygiene
8 outdated, 0 vulnerable, 2 deprecated packages.
What to do
- Resolve the 2 Deprecated finding(s) in Dependency Hygiene. — One of this dimension's main actionable groups (2 warning-level).
- Resolve the 1 Outdated finding(s) in Dependency Hygiene — start with FSharpPacker.Tests.csproj. — One of this dimension's main actionable groups (1 recommendation-level).
D13 · Secret Scanning
Secret scan ran and found no leaked secrets.
D14 · License Compliance
0 of 80 packages use a banned license. ★ DEPTH: this repository's MSBuild projects declare 2 direct `PackageReference`(s), and 78 further package(s) were reached beyond them by closing the graph over nuget.org's own nuspec dependency graph — so a banned licence pulled in only by a dependency's OWN dependencies is inside this verdict. A package whose licence nuget.org could not be asked for is not graded, and version ranges are taken at their lower bound, so this is the closure as that graph states it rather than a restored consumer's exact resolution.
D15 · Churn × Complexity Hotspots
No churn × complexity hotspots in the window.
D17 · Explicit Debt
0 deducted debt markers + unmeasured dead symbols across 0 LoC in the .NET projects (0.0/KLoC) → score 10.0. Dead code not measured: the solution did not load cleanly, so the reference search was skipped. Measured on the .NET source only: .fs (100% of production source) was not read, and carries at least 0 uncounted task marker(s) in 0 file(s).
D19 · Documentation Quality
1 of 1 documentation facets pass in full. 1 document(s) read across 1 unit(s).
D20 · ADR Quality
No architecture decision records were found.
What to do
- Resolve the 1 No ADRs found finding(s) in ADR Quality — start with FSharpPacker.FSharp.fsproj. — One of this dimension's main actionable groups (1 recommendation-level).
D27 · Navigability
93 % of calls cross a namespace and 3 % go through an interface, but 89 % of collaborators are co-located — so a call's collaborators sit together and tracing stays easy. Baseline: small — navigation cost is tolerated.
D28 · Secrets (history)
gitleaks scanned the full history AND the current working tree and found no secrets.
D29 · Static Analysis (SAST)
5 finding(s): 0 critical, 2 high, 3 medium, 0 low. 2 unpinned-GitHub-Actions row(s) are reported here but scored by D36 (supply-chain provenance), which measures that posture as `pinned_actions` — one pinning decision is charged once, not once per lens.
What to do
- Resolve the 2 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED (2). — One of this dimension's main actionable groups (2 warning-level).
- Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).
- No action in Static Analysis (SAST) — all 2 REDACTED finding(s) are reported here at file:line but scored by D36 (supply-chain provenance), so none is charged to this dimension. — One of this dimension's main actionable groups (2 issue-level, 0 of them charged here).
D30 · Dependency Vulnerabilities
No known-vulnerable dependencies in any ecosystem this repository declares.
D31 · IaC & Container Security
3 finding(s): 0 critical, 1 high, 2 medium, 0 low.
What to do
- Resolve the 1 High IaC finding(s) in IaC & Container Security — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
- Resolve the 2 Medium IaC finding(s) in IaC & Container Security — start with REDACTED (2). — One of this dimension's main actionable groups (2 warning-level).
D34 · Knowledge Freshness
3 of 3 significant source file(s) are orphaned — their living knowledge has decayed to nothing, so no one currently understands them. The largest is FSharpPacker.FSharp/Packer.fs.
What to do
- Resolve the 3 Orphaned file finding(s) in Knowledge Freshness — start with Packer.fs, Program.fs, FsxPrepocessor.fs. — One of this dimension's main actionable groups (3 recommendation-level).
- Resolve the 1 Orphaned files with no living knowledge finding(s) in Knowledge Freshness. — One of this dimension's main actionable groups (1 recommendation-level).
D35 · Change Coupling
No strong hidden change-coupling between production files.
D43 · Malicious Dependencies
No dependency in any ecosystem this repository declares is published as malicious.
D44 · Platform End-of-Life
1 end-of-life runtime(s) and 0 end-of-life framework(s), read from 2 platform declaration(s) and 0 dependency declaration(s). This dimension reads what the repository says about ITSELF — a pinned target framework, a version file, a capped requires-python, a Rust toolchain pin, a framework major a constraint cannot move off. A FLOOR is deliberately never charged: `requires-python = ">=3.8"` states what the package SUPPORTS, not what it runs on, and a well-maintained library declares exactly that while running its own CI on a current release. The end-of-life facts are FROZEN and dated, so this dimension needs no network and answers identically inside a closed scan fence; as the table ages it loses recall and never precision, because a statement about support that ended in the past cannot become false. The OS layer of a container image is D31's question and the toolchain a CI workflow installs is D29's; this row is neither.
What to do
- Resolve the 2 End-of-life runtime finding(s) in Platform End-of-Life — start with FSharpPacker.FSharp.fsproj, FSharpPacker.Tests.csproj. — One of this dimension's main actionable groups (2 warning-level).
Frontend & cross-cutting dimensions
AX10 · Code composition
AX3 · Project dependency cycles
AX4 · Dependency direction
GD1 · Unfinished & placeholder code
M1 · Documentation (README)
What to do
- Explain in the README how to run the tests. Add a section called Testing to the README in the repository's top folder, saying how to run the test suite.
M2 · Architecture documentation
- No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
- No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.
What to do
- Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
- Add a C4 context/container diagram (Structurizr, PlantUML or Mermaid) or an architecture.md overview.
M3 · Folder & project structure
P1 · CI/CD gates
P2 · Observability
- No logging or diagnostics emission found. This repository ships a binary its users launch rather than a service you operate, so there is no operator to page — but when a run fails on a user's machine, neither they nor you have anything to read.
What to do
- Write a diagnostic trail the user can hand back with a bug report: a log file under the platform's per-user data directory, switchable with a `--verbose`/`--debug` flag. Start with the error paths that emit nothing — a discarded error is the failure the user cannot describe and you cannot reproduce.
P3 · Security & performance tooling
- No static application security testing detected. For this repository's stack, add `semgrep --config=auto` plus gitleaks for committed secrets (F# is not a CodeQL language and has no language-specific SAST engine) as a CI step. What was searched, so you can tell an absence from a miss: the 1 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner. — REDACTED:6
- `FSharpPacker.FSharp/FSharpPacker.FSharp.fsproj` declares packages, and nothing in the repository keeps them current: no Dependabot or Renovate configuration that schedules updates, and no dependency-review gate on pull requests. A pinned dependency stays at the version it was added at until someone notices — including after an advisory is published against it. Add a `.github/dependabot.yml` with one `package-ecosystem` entry per ecosystem the tree uses (or an enabled `renovate.json`), and gate pull requests with `actions/dependency-review-action`. — FSharpPacker.FSharp/FSharpPacker.FSharp.fsproj:24
What to do
- Add a SAST step to CI running what this repository's stack ships: `semgrep --config=auto` plus gitleaks for committed secrets (F# is not a CodeQL language and has no language-specific SAST engine) — so a security regression fails the build instead of landing.
- Enable Dependabot/Renovate or a dependency-review gate.
- Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
P4 · Deployment & Rollback
What to do
- Nothing pauses a release for a human: publish as a draft release (or gate the release job on a protected tag/manual dispatch) so a bad build can be stopped before users can download it.
P6 · Release Hygiene
- No CHANGELOG/HISTORY/RELEASES file — what shipped when isn't easy to reconstruct for support or audit. (Versioning/tagging makes releases traceable, but a changelog records the what.)
What to do
- Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release.
X27 · Collection changed while being enumerated
Reference — by lens
| Lens | Score | Rating | Impact |
|---|---|---|---|
| Code Health | 97% | Exemplary | Strongest area. |
| Architecture | 54% | Adequate — gated by AX10 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Maturity | 43% | Weak — gated by D34, M2 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Readiness | 37% | Weak — gated by P2, P3 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Security | 85% | Checked 5 of 11 | Solid. |
Unscored — 2 check(s) recorded observations but carry no score
- D36 Supply-chain Provenance & Signing — 1 observation(s) recorded · The CI pipeline publishes no artifact — no package publish, container push or release with files to download. Supply-chain provenance, signing and an SBOM describe a PUBLISHED artifact for the people who obtain it, so there is nothing to attest here; a deployment of the service itself publishes nothing for anyone else to verify. Add them to the release pipeline when this repo starts publishing artifacts (a package, a container image, or a release with downloadable files). Build integrity and workflow-token hygiene are reported below: they describe what the CI runs and the token it runs with, neither of which is affected by whether the pipeline ships an artifact.
- SC1 Supply-chain hygiene — 1 observation(s) recorded · Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Not evidenced — 4 control(s) we could not find positive evidence for
- C3 Audit Trail — Not assessed: these audit controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks audit controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C4 Data Retention — Not assessed: these retention controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks retention controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C5 Data-Subject Rights — Not assessed: these data-subject rights controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks data-subject rights controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
Not included — 73 check(s) not relevant to this codebase
- AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
- AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
- AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
- AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
- AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
- AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
- AX1 Captive dependencies — Not applicable: this repository's F# imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's.
- AX2 Stateful singletons — No container singleton was found, so there is no shared instance for concurrent requests to race on. No F# function in this code takes an ASP.NET Core or Suave HttpContext (a Giraffe, Saturn, Falco, Oxpecker or Suave handler) and no F# class is an ASP.NET Core controller, so no request handler shares module state between request threads.
- AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX6 Interface segregation — not assessed — interface segregation is computed over a type surface that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX7 Slice cohesion — not applicable — not a vertical-slice architecture
- AX8 Test isolation — no test/production split to check
- AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
- AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- AXR1 Runtime accessibility — the image ran but published no HTTP port — nothing to crawl (EXPOSE the web port to unlock runtime evidence) This is a statement about this run, not a statement about your application: nothing here says the surface is inaccessible, only that it was never rendered.
- C1 Data Protection — Not assessed: these personal data controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks personal data controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C2 Access Controls — Not assessed: these authorization controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks authorization controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- D11 Test Reliability — Test reliability not measured — no test run produced results
- D16 Bus Factor — single-maintainer repository — bus factor is not applicable
- D18 Solution Shape — D18 scores the shape of a C#/VB .NET solution, but this repository's production source is mostly .fs, which the C#/VB workspace does not load — the projects that loaded are an immaterial minority, so solution shape was not assessed for this repository. Not scored — this is a gap in the analyzer's reach, not a verdict about this repository.
- D21 Naming Consistency — N/A — too few peers to establish a naming convention (76 declarations, no unit with a dominant convention).
- D22 Internal API Consistency — No intentionally-exposed public API to evaluate for consistency.
- D23 Boundary Type-Coupling — small single-context codebase (336 production LoC in the .NET projects) — bounded contexts are not needed at this size No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ sibling projects each declaring an entity of their own or taking another project's integration events. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
- D24 Comment Value — D24 reads C#, Visual Basic, TypeScript and JavaScript comments only; comments in this repository's .fs source were not judged.
- D25 ADR Conformance — no ADRs to check
- D26 Project Cohesion — This repository is one project, `FSharpPacker.Tests` (0 LoC, 1 public types across 1 namespaces), within the size bounds. Not scored: a single unit of this size gives project cohesion nothing to grade.
- D32 Data Compliance (PII/GDPR) — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.
- D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
- D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
- D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
- D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
- D7 Architectural Integrity — no checkable ADRs and no dependency cycles — architectural integrity not assessed
- D8 Code Coverage — Coverage not measured
- DM1 Domain Modelling — not scored — this repository shows only 1 of the 3 signals this lens looks for (2 value object(s))
- ED1 Event-Driven — not scored — this repository shows none of the 3 signals this lens looks for
- ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
- ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
- IC1 Incompleteness & stubs — reported, not scored — this repository's C# declares no analysable method bodies (a constants, record or DTO assembly), and this score is a density of unfinished work per method, which has no denominator here. The file-level signals below were still collected and are shown in full
- M4 Documentation accuracy — Not applicable: the 1 current-state document(s) make no claim of a kind M4 checks. 1 claim(s) of kinds M4 does not check were not checked (command argument 1); M4 checks only links and versions and artefact counts.
- P12 CI test-gate honesty — Reported, not scored — and nothing was matched here. The coverage check applies to any stack, and the automatic-re-run check to any GitHub-Actions workflow, but the checks for excluded tests, skipped tests and sleep-based synchronisation currently recognise only some ecosystems' test-runner idioms, so on a repository built with another stack the zeros below mean 'not checked', not 'clean'.
- P7 Outbound HTTP resilience — not measured — the application kind could not be determined for this repo
- P8 Schema migrations — no EF Core usage detected
- P9 Domain vs controller coverage — coverage not measured: this check compares the coverage of the analyzer's own test run across the domain and web layers, and that run measured none here — Test coverage (D8) says why
- PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for a BenchmarkDotNet reference in an .fsproj or .vbproj, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
- PF2 Allocation hygiene — Not scored: this check counted allocation-aware idioms (Span, pools, stackalloc) per line, which describes what kind of code a repository is rather than whether it has an allocation problem, so it was withdrawn. Nothing here is a finding about your code.
- PF3 Async & latency hygiene — Not applicable: this repository declares no async functions, so there is no asynchronous code for a blocking call to stall.
- S1 Web-Security Posture — Not assessed: these web-security controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks web-security controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- X1 Async correctness — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X10 Duplicated predicate — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X12 Unreachable branch — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X13 Undrained process stream — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X14 Bypassable address classification — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X15 Unvalidated length from an untrusted reader — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X16 Unfloored truncation loop — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X17 Uncapped recursion over a caller-supplied document — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X18 Disposal-pattern correctness — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X19 Unrestored process-global state — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X2 Cancellation propagation — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X20 Mistyped argument guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X21 Side-effecting pattern guard — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X22 Contradicted release guard — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X23 Unguarded diagnostic materialisation — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X24 Document value interpolated into markup unescaped — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X25 Inert configuration knob — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X26 Unsynchronised callback handoff — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X28 Index access outside its own emptiness guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X29 Per-element action decided by a fixed element — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X3 Exception handling — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X30 Support guard that admits what it rejects — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X32 Type resolved by simple name across every loaded assembly — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X4 Structured logging — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X5 Nullable reference types — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Appendix A — Findings (grouped)
Critical — 3 finding(s)
- REDACTED
- REDACTED
- REDACTED
Serious — 16 finding(s)
- Deprecated: MSTest.TestAdapter
- Deprecated: MSTest.TestFramework
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- End-of-life runtime: .NET net6.0 FSharpPacker.FSharp/FSharpPacker.FSharp.fsproj:5
- End-of-life runtime: .NET net6.0 FSharpPacker.Tests/FSharpPacker.Tests.csproj:4
- Program.main (cyclomatic 17) FSharpPacker.FSharp/Program.fs:30
- Packer.classifyLine (cyclomatic 17) FSharpPacker.FSharp/Packer.fs:110
- Packer.classifyLine (cognitive 31) FSharpPacker.FSharp/Packer.fs:110
- Program.main (cognitive 17) FSharpPacker.FSharp/Program.fs:30
- REDACTED
- REDACTED
- No structured logging
- NuGet dependencies are not locked
Minor — 12 finding(s)
- Orphaned file FSharpPacker.FSharp/Packer.fs:1
- Orphaned file FSharpPacker.FSharp/Program.fs:1
- Orphaned file FSharpPacker.FSharp/FsxPrepocessor.fs:1
- Outdated: coverlet.collector FSharpPacker.Tests/FSharpPacker.Tests.csproj:12
- No ADRs found FSharpPacker.FSharp/FSharpPacker.FSharp.fsproj:4
- Orphaned files with no living knowledge
- REDACTED
- No ADRs
- No architecture diagram/doc
- No SAST REDACTED:6
- No dependency-update automation FSharpPacker.FSharp/FSharpPacker.FSharp.fsproj:24
- No changelog
Minor — 7 finding(s)
- Outdated: Microsoft.NET.Test.Sdk
- Outdated: Microsoft.Testing.Extensions.CodeCoverage
- Outdated: Microsoft.Testing.Extensions.TrxReport
- Outdated: MSTest.TestAdapter
- Outdated: MSTest.TestFramework
- Outdated: Argu
- Outdated: FSharp.Core
Appendix B — Reproduction & audit trail
| Dimension | Tool | Version | Command | Findings | Raw output |
|---|---|---|---|---|---|
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-69a833ddc7454346a894f0dcf1a902f9/history.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-69a833ddc7454346a894f0dcf1a902f9/tree.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-tree.json |
| D29 · Static Analysis (SAST) | semgrep | — | semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/canine-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off --exclude *.arrow --exclude *.avro --exclude *.csv --exclude *.dat --exclude *.db --exclude *.feather --exclude *.geojson --exclude *.h5 --exclude *.hdf5 --exclude *.jsonl --exclude *.log --exclude *.ndjson --exclude *.npy --exclude *.npz --exclude *.orc --exclude *.parquet --exclude *.pickle --exclude *.pkl --exclude *.psv --exclude *.sqlite --exclude *.sqlite3 --exclude *.tfrecord --exclude *.tsv --exclude *.txt . | 5 | artifacts/raw/semgrep.json |
| D30 · Dependency Vulnerabilities | dotnet | — | dotnet list FSharpPacker.sln package --vulnerable --include-transitive --format json | 0 | artifacts/raw/dotnet-vulnerable.json |
| D31 · IaC & Container Security | trivy | — | trivy config --format json --quiet . | 3 | artifacts/raw/trivy-config.json |
| D32 · Data Compliance (PII/GDPR) | semgrep | — | semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that. | 0 | — |
| D37 · Vulnerability-disclosure Policy | disclosure | — | disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed. | 0 | — |
| D40 · Network Egress Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here. | 0 | — |
| D41 · Kernel & Syscall Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here. | 0 | — |
| D42 · Runtime Threat Enforcement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here. | 0 | — |
| D43 · Malicious Dependencies | osv-scanner | — | osv-scanner --format json --recursive --experimental-disable-plugins transitivedependency/requirements --experimental-disable-plugins dotnet/csproj --experimental-disable-plugins dotnet/nugetcpm . /tmp/codehealth-osv-sbom-5818407770ba45f5809954214e1dbf84 | 0 | artifacts/raw/osv-scanner.json |