Executive summary
jashkenas/backbone falls short of our standard for production, held back most by its Code Health lens, the quality of the code itself. It scores 52 out of 100 and is rated Adequate, and 17 of its 19 critical findings are security problems in the packages it uses and in the build pipeline.
Code Health, at 42, is the weakest lens and counts most in the score. The best first step is adding type checking, worth about 6 points. Fixing the part of the code only one person knows comes next, worth about 3 points. Raising Code Health to 70 would lift the score to about 59.
Fifteen known security holes in the packages the code depends on can be used by attackers. Two pipeline tools are referenced by a changeable name, so the build pipeline can be tampered with, and one form field can't be read by a screen reader. Updating the vulnerable packages, pinning each tool to an exact version and labelling the form fields would close these risks. The page that doesn't say its language needs its language set.
The product code is 2,684 lines, about €8,100 to rebuild.
If Code Health rose from 42 to 70, the lowest score rated Strong, the score would rise from 52 to about 59.
Fixed since the last survey: 2 findings
- Secrets (history) · High secret: WD-SECRET-0005 REDACTED
- A11y enforcement · Accessibility enforcement below the top rung
Rebuild cost: about €8,100 · Estimate
| Cost to rebuild | €2,700 to €13,000, for 45 to 142 hours of work, under 0.1 person-years for one engineer |
|---|---|
| Difficulty of the problem | Standard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write. |
| Quality factor | ×0.7 at a score of 52. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it. |
| Size | Small: 2,684 lines of product code |
| What it is not | Not a quotation: nobody has offered to build it for that. Not a valuation: it says nothing about what the business is worth. Not a certified figure: no professional has signed it as one. |
Top priorities
Diagnosis: what the measurements show together
At a glance — Code Health
At a glance — Architecture
At a glance — Maturity
At a glance — Readiness
At a glance — Security
At a glance — Accessibility
Security & Compliance — OWASP Top-10 mapping
| OWASP category | Findings | Severity |
|---|---|---|
| A05:2025 — Injection | 262 | High / Critical |
| A03:2025 — Software Supply Chain Failures | 18 | High / Critical |
Roadmap
Top priorities: Adopt TypeScript for the frontend: add a typecheck step to the build, then either type-check the existing JavaScript in place (`checkJs`/JSDoc types) or convert the highest-traffic modules first — no file is typed today, so this is an adoption, not a clean-up; Split each oversized file along the responsibilities already in it, into smaller focused modules in the same package; Swallowed exception (empty catch).
| Do this | Helps | Effort | Dimension |
|---|---|---|---|
| Adopt TypeScript for the frontend: add a typecheck step to the build, then either type-check the existing JavaScript in place (`checkJs`/JSDoc types) or convert the highest-traffic modules first — no file is typed today, so this is an adoption, not a clean-up. | +6.1 pts | Medium | Type Safety |
| Resolve the 1 Off-boarding risk finding(s) in Bus Factor. | +2.9 pts | Low | Bus Factor |
| Split each oversized file along the responsibilities already in it, into smaller focused modules in the same package. | +5.0 pts | Medium | Large Files |
| Swallowed exception (empty catch) | +4.2 pts | Medium | Exception handling |
| Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them. | +4.2 pts | Medium | Architecture documentation |
| Add a SAST step to CI running what this repository's stack ships: CodeQL's javascript-typescript pack, `semgrep --config=p/javascript`, or eslint-plugin-security — so a security regression fails the build instead of landing. | +2.8 pts | Medium | Security & performance tooling |
| Bring the 1 body over 30 down to 30 or less in Cognitive Complexity — start with set (cognitive 69). | +2.0 pts | Medium | Cognitive Complexity |
| Add a build/run (quick start) section to the root README — the first thing a newcomer needs. | +1.7 pts | Medium | Documentation (README) |
File quality
| File | Score | Band | Worst signal |
|---|---|---|---|
| REDACTED | 0.7 | Slop | Dependency Vulnerabilities: High CVE: REDACTED |
| REDACTED | 2.7 | Slop | Static Analysis (SAST): High: REDACTED |
| REDACTED | 4.4 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| REDACTED | 5.5 | Mixed | Static Analysis (SAST): Medium: REDACTED |
| docs/js/jquery.lazyload.js | 7.8 | Mixed | Cyclomatic Complexity: jquery.lazyload.$.fn.lazyload (cyclomatic 19) |
| package.json | 8.5 | Near-clean | Dependency Hygiene: Deprecated: eslint |
| REDACTED | 9.3 | Near-clean | Static Analysis (SAST): Low: REDACTED |
How the grades work
A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.
Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.
Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.
Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.
Methodology & how to trust this report
This survey is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. All 50 evaluated dimensions are computed by tools and static analysis; no language model sets or judges any of them. Overall confidence is 0.8, the weighted average across measured dimensions.
What we checked — 50 dimensions across the health lenses
- Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 320 of 330 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line.
- Is there a tool behind the number? Every score below names the method that produced it: Roslyn, git or a scanner, not a narrative.
- Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.
Tools & methods
| Method | Backs | Version | Evaluator |
|---|---|---|---|
| Roslyn static analysis | Complexity, cohesion, coupling, dead code, API surface, layering | 5.3.0 | ✓ deterministic |
| Native secret scanner | Hardcoded secrets / credentials | 1.0.0 | ✓ deterministic |
| Canine Code Analyzer duplication detector (in-process) | Code duplication | 1.0.0 | ✓ deterministic |
| Coverage (coverlet / dotnet-coverage) | Line & branch coverage | 10.0.400 | ✓ deterministic |
| NuGet / dotnet | Outdated, vulnerable & deprecated dependencies | 10.0.400 | ✓ deterministic |
| git / LibGit2Sharp | Churn hotspots, knowledge concentration, history | 2.43.0 · 0.31.0 | ✓ deterministic |
| gitleaks · semgrep · trivy | Secrets in history, SAST, CVEs, IaC & container, PII / GDPR | 1.86.0 · 0.69.3 | ✓ deterministic |
Run transparency — what happened this run
- D8 Code Coverage — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Coverage NOT MEASURED: the JavaScript/TypeScript half could not be measured — the JavaScript/TypeScript suite(s) run through a browser-driven runner the coverage collector does not drive — the repository root (karma) — a gap in the analyzer, not something this repository is missing. Coverage is excluded from the score rather than counted as a near-zero. This is OUR limitation, not a defect in the repo.
- D11 Test Reliability — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Test source is present (.js) and the reliability runner does support this ecosystem — it drives jest, vitest, mocha and egg-bin — but every JavaScript/TypeScript test package this repository declares runs its suite in a real browser, which the re-runner has no way to launch. the root package declares `karma` and its `scripts.test` is `karma start && coffee test/model.coffee && npm run lint`. So flakiness couldn't be assessed. Not scored — this is a gap in the analyzer's browser-driven test support, not a missing .js runner and not a finding about this repository.
- D21 Naming Consistency — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. PREREGISTRATION version 20's fallback (adjudication D21-sample3-v3): this rule kind was adjudicated below the 95 % precision gate, so its candidates are counted here and not published, and the score covers only the acronym-spelling and awaitable-suffix rules. The kind returns as rows only after it shows a measured precision; this says nothing about whether these names are consistent.
- D22 Internal API Consistency — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D22 identifies the intentionally-exposed surface from `IsPackable` and `.Contracts` project names, MSBuild conventions read off the loaded project set. This target exposed no such projects, so the probe never ran; this says nothing about whether the repository has a public API. This repository commits no C#/VB source at all, so there was never an MSBuild project set to read these conventions off. That is OUR side and it is an ADMISSION gap, not an environment fault: it declares a published package (package.json), but no published-package marker D22 reads admitted any project here. D22 DOES collect the public API of every language in this tree, and admits a project only when its manifest makes that ecosystem's publication act in a form the marker recognises — so what is missing is not a collector but an admission rule for the publication act this repository makes, if it makes one. The remedy is a better discriminator for that marker — not a collector, and no change to the scan image can close it. The marker's rules are measured to refuse applications, so one refused repository is the rule working as calibrated; several are the evidence that it is too strict. For npm the surface is what a published package.json's entry points (exports, main, module, types) export, followed through the source; an entry that names build output the tree does not commit (dist/, build/) is not followed back to source, because only a tsconfig outDir/rootDir pair states that mapping and a bundler's input lives in executable configuration this engine does not evaluate.
- AXB1 Runtime evidence locked — no reproducible boot — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Subject: 1 markup document(s) — HTML, Razor, JSX, Vue, Svelte or server templates. The Runtime Evidence tier boots an app only via docker-compose, an Aspire AppHost, a Dockerfile, an npm dev script, a web service's own toolchain entry point (cargo, go, dotnet, Python, Spring Boot), or an Android app's own Gradle wrapper (run on an emulator); an Apple or Flutter app needs a host it lacks. None applied, so no live runtime a11y/egress/header evidence was collected. You can widen what we reach: add a docker-compose.yml (or an Aspire AppHost) that brings the app up with its dependencies. We then boot it in an isolated sandbox and gathers real runtime evidence — you change nothing in your pipeline (no CI step, no SDK).
- M4 Documentation accuracy — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. M4 checks only the claim kinds adjudicated at or above 95 % precision: links and versions (PREREGISTRATION version 9), and artefact counts an order of magnitude off. Paths, command arguments, installs, environment variables, settings, projects, packages, routes, cd targets, infrastructure products and removed modules are read but not checked, and none of them is reported or counted.
- P5 DR & Backup — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. No backup/snapshot/replication config, RTO/RPO or restore-procedure documentation was found — and none applies: this repository publishes a library and deploys nothing (no container, IaC or deployment manifest), so it holds no runtime state of its own. Any data-access dependency it declares is the store it is a CLIENT for, not one it operates. The DR control belongs to whoever runs that data.
- S1 Web-Security Posture — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 7 JavaScript/TypeScript file(s) were read for weak hashes and ciphers, key material fixed in the source, disabled certificate validation, obsolete TLS versions, plaintext password storage and session cookies set without HttpOnly, Secure or SameSite, and none was found. The server controls this dimension also scores were not assessed, so no score is given.
- X2 Cancellation propagation — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Go, PHP, Dart, Kotlin, Ruby, Scala, Java, Python and Rust source only, and no C# was loaded, and no named async function in this repository's JavaScript/TypeScript, nor any Go, PHP or Dart function or Kotlin suspend function, makes a request that can be cancelled (fetch, axios, ky, ofetch, got, undici, node:http; net/http, net.Dial; amphp; Dio; Ktor, OkHttp), so there is nothing to judge, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X4 Structured logging — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Python, PHP, Dart, Ruby, Scala and Rust source only, and no C# was loaded, and this repository's JavaScript/TypeScript, Python and PHP make no call through a named logger, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
Limitations & what we did not check
We assess the repository exactly as committed, and only the repository. By design we do not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.
Per-dimension blind spots
- D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
- D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
- D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
- D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
- D12 Dependency Hygiene: Dependency health reads manifests and lockfiles — a vulnerability in a vendored/copied dependency, or risk from how a dependency is actually used, is outside this view.
- D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
- D14 License Compliance: License compatibility is checked against declared package metadata and a policy — mislabelled or missing license metadata, and obligations that depend on how you distribute, are not resolved here.
- D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
- D16 Bus Factor: Bus-factor is a time-decayed model of commit attribution (who has recently, repeatedly worked a file), not comprehension — pairing, review and reading-without-committing spread knowledge it can't see; bot commits and shared accounts still distort it.
- D19 Documentation Quality: Documentation quality publishes two things only: a runnable or packaged unit with no example, and a multi-project root README that maps none of its parts. It does not judge clarity, and its other checks (overview, licence, boilerplate, structure, empty sections, XML-doc coverage) are withheld after adjudication: their candidates are counted in the card's gaps, not shown as rows. A false statement in a document is M4's; units are .NET projects only.
- D24 Comment Value: Comment value is measured as redundancy only: a comment that repeats its code's words is found, but a paraphrase in other words, a vague comment, or one the code contradicts is not, and whether a comment is valuable is not claimed. Comments in other scripts or languages, and outside C#, are not judged.
- D26 Project Cohesion: Project focus is sized from members/namespaces per project — a project that is broad by deliberate design reads the same as one that has sprawled.
- D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
- D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
- D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
- D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
- D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
- D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
- D44 Platform End-of-Life: The support table is FROZEN, so it goes out of date by losing RECALL: a release that ended support after the table was written is missed until the table is refreshed, and this dimension reading 10 is not evidence that a platform is current. Only platforms the repository DECLARES in a place this pass reads are seen — a runtime named only in a Dockerfile (D31's subject), in a CI workflow (D29's), or in a file this pass does not parse (go.mod, a Gemfile ruby directive) is invisible here, which is why a repository declaring none of them abstains rather than scoring. Only frameworks with a PUBLISHED support policy are tracked: React, Flask and Express publish none, so their age cannot be judged and their absence from a report is not a statement that they are supported.
- AC1 Text alternatives: Alt-text is detected structurally — the scan sees that an alternative EXISTS, not whether it meaningfully describes the image, and decorative-vs-missing is judged by attribute shape; runtime-injected images and a non-role=img decorative svg are out of scope. This is accessibility readiness, never a WCAG conformance claim.
- AC2 Forms & labels: Label association is read from static markup — a label wired up at runtime (JS-set aria-labelledby, framework-injected ids) reads as missing, a present label says nothing about whether its text is correct. A known UI-library field component (e.g. a JSX <TextField>) is now checked conservatively — flagged only when it carries NO label/aria-label/aria-labelledby/id/name — but wrapper/context-labelled libraries (Chakra/Radix FormControl+FormLabel) aren't statically visible (possible false positive) and non-JSX lowercased components are still skipped. A click handler on a plain element is now asked for a name too (it is a control the author declared), but the subtree test that answers it is deliberately generous: any DYNAMIC text expression in the subtree counts as a name, so an icon chosen by a ternary ({cond ? <IconA/> : <IconB/>}) reads as named, and a glyph component from a library the icon-import list does not know still names its parent. A clean result is "no unlabelled control found", not a labelling proof.
- AC3 Page structure: Page structure is read from the static markup tree — landmarks, headings and lang injected at runtime aren't seen, heading ORDER is checked structurally (not against the rendered visual hierarchy), and lang/title/main fire only on full documents, never partials, and the data-table check sees header-cell presence (a <th> exists), not whether each header correctly associates with its cells. Static readiness, not conformance.
- AC6 Visual & motion safety: Contrast and motion safety are PARTIAL by construction — literal colours (hex/rgb/hsl/named) in inline styles, in-repo <style> blocks, in-repo .css files, var() tokens, Tailwind neutral utilities and CSS-in-JS top-level declarations are read (same-rule/same-element colour+background pairs only); computed/runtime/theme colour, external-CDN stylesheets, CSS-in-JS dynamic (${…}) and nested-selector colours, cross-element pairs and image contrast stay out of reach, so a clean result is bounded by what the static CSS itself shows.
- AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
- M4 Documentation accuracy: Documentation accuracy checks links, versions and artefact counts against the tree: other claims (paths, commands, settings, routes) are read but not checked, and it cannot run the onboarding or measure how long a real new joiner takes.
- P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.
Dimensions
D1 · Cyclomatic Complexity
10 method(s) exceeded the cyclomatic complexity threshold of 15; the worst was set at 45.
What to do
- Bring the 1 body over 30 down to 30 or less in Cyclomatic Complexity — start with set (cyclomatic 45). — Refactoring it lifts Cyclomatic Complexity from 6.7 to about 7.6/10.
D2 · Cognitive Complexity
9 method(s) exceeded the cognitive complexity threshold of 15; the worst was set at 69.
What to do
- Bring the 1 body over 30 down to 30 or less in Cognitive Complexity — start with set (cognitive 69). — Refactoring it lifts Cognitive Complexity from 6.1 to about 7.9/10.
D3 · God Classes
1 over-large unit(s) detected — types, modules or files that carry too much.
What to do
- Resolve the 1 FileTooLong finding(s) in God Classes — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).
D4 · Code Duplication
0 duplicated block group(s) detected.
D12 · Dependency Hygiene
1 outdated direct production npm dependency(ies) of 1 graded, 1 pinning defect(s), across 1 package.json (1 of them the product) and 1 committed lockfile(s). Development dependencies are deliberately not graded for currency: that grade is about what SHIPS. 1 direct dependency(ies) — production, development or optional — are marked DEPRECATED by their publisher (the registry's per-version mark, or the lockfile's copy of it when the registry could not be asked); deprecated transitive packages are listed but not charged. Whether any is UNMAINTAINED is not graded — the registry publishes no maintenance status, and release age does not stand in for one. Whether any is UNUSED is not graded either: that is a source question, and the frontend dependency lens (R8) answers it in this same run. Known CVEs in this dependency graph are D30's question, read from the manifest there.
What to do
- Resolve the 1 Deprecated finding(s) in Dependency Hygiene — start with package.json. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 Floating npm dependency finding(s) in Dependency Hygiene. — One of this dimension's main actionable groups (1 warning-level).
D13 · Secret Scanning
Secret scan ran and found no leaked secrets.
D14 · License Compliance
0 of 1 shipped npm package(s) use a banned license. Licences were resolved from registry.npmjs.org over the 1 package(s) this repository's committed lockfile installs for a consumer — its 1 production, optional and peer dependency(ies), across 1 product package.json manifest(s), and everything those install in turn. Its 11 `devDependencies` declaration(s), and every package only they reach, are excluded: a consumer installs none of them. ★ Each licence is the one the registry publishes for the package's CURRENT release rather than for the pinned version, which is the same caveat the Hex and RubyGems arms carry. This repository publishes itself under MIT, which is its own choice and is not judged here.
D15 · Churn × Complexity Hotspots
No churn × complexity hotspots in the window.
D16 · Bus Factor
1 source file(s) have their living knowledge concentrated in one author (≥90% of recent, decayed contribution). The largest is REDACTED. Counted over 2 of the 5 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.
What to do
- Resolve the 1 Off-boarding risk finding(s) in Bus Factor. — One of this dimension's main actionable groups (1 recommendation-level).
D19 · Documentation Quality
1 of 1 documentation facets pass in full. 2 document(s) read across 1 unit(s).
D24 · Comment Value
1 of 196 judged comments only repeat the code they sit on (0.5 %). 5 comment(s) in another language or script were not judged.
D26 · Project Cohesion
0 of 2 build units (npm) flagged as possibly oversized/incoherent.
D28 · Secrets (history)
gitleaks scanned the full history AND the current working tree and found no secrets.
D29 · Static Analysis (SAST)
264 finding(s): 0 critical, 2 high, 4 medium, 258 low. 2 unpinned-GitHub-Actions row(s) are reported here but scored by D36 (supply-chain provenance), which measures that posture as `pinned_actions` — one pinning decision is charged once, not once per lens. semgrep hit a parse error in 1 file(s) — `REDACTED` (line 632, line 634, lines 2880–2881, …) — so no absence of findings in the named regions is evidence of anything; rows reported elsewhere in those files are real. Fix the syntax error (or exclude the file deliberately) and re-scan to cover them.
What to do
- Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).
- No action in Static Analysis (SAST) — all 2 REDACTED finding(s) are reported here at file:line but scored by D36 (supply-chain provenance), so none is charged to this dimension. — One of this dimension's main actionable groups (2 issue-level, 0 of them charged here).
D30 · Dependency Vulnerabilities
18 finding(s): 0 critical, 15 high, 3 medium, 0 low.
What to do
- Resolve the 15 High CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (15). — One of this dimension's main actionable groups (15 issue-level).
- Resolve the 3 Medium CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (3). — One of this dimension's main actionable groups (3 warning-level).
D34 · Knowledge Freshness
Every significant source file has living knowledge — recently and meaningfully worked. Counted over 2 of the 5 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.
D35 · Change Coupling
No strong hidden change-coupling between production files.
D37 · Vulnerability-disclosure Policy
A vulnerability-disclosure policy (SECURITY.md) is published with a reporting contact.
D43 · Malicious Dependencies
No dependency in any ecosystem this repository declares is published as malicious.
D44 · Platform End-of-Life
0 end-of-life runtime(s) and 0 end-of-life framework(s), read from 0 platform declaration(s) and 1 dependency declaration(s). This dimension reads what the repository says about ITSELF — a pinned target framework, a version file, a capped requires-python, a Rust toolchain pin, a framework major a constraint cannot move off. A FLOOR is deliberately never charged: `requires-python = ">=3.8"` states what the package SUPPORTS, not what it runs on, and a well-maintained library declares exactly that while running its own CI on a current release. The end-of-life facts are FROZEN and dated, so this dimension needs no network and answers identically inside a closed scan fence; as the table ages it loses recall and never precision, because a statement about support that ended in the past cannot become false. The OS layer of a container image is D31's question and the toolchain a CI workflow installs is D29's; this row is neither.
Frontend & cross-cutting dimensions
AC1 · Text alternatives
AC2 · Forms & labels
- This control has only a placeholder — a placeholder is not a label (it vanishes on input and many AT ignore it). Add a <label for>, a wrapping <label>, or aria-label. — REDACTED:310
What to do
- Give every control a programmatic label (a <label for> / wrapping <label> / aria-label) and every button text — a placeholder is not a label.
AC3 · Page structure
- The page declares no language, so assistive tech can't pick the right pronunciation. Add lang (e.g. lang="en"). — REDACTED:2
- No <main> (or role="main") means no "skip to content" target and a weaker landmark map. Wrap the primary content in <main>. — REDACTED:2
- A <table> with data cells but no <th> gives assistive technology no way to associate cells with their headers. Mark the header row/column cells as <th> (with a scope). — REDACTED:610
What to do
- Declare <html lang>, a document <title> and a <main> landmark, keep headings in order, leave zoom enabled, title iframes and drop meta-refresh.
AC6 · Visual & motion safety
- `#todoapp input[type="text"]` sets the outline to none/0 and no visible :focus / :focus-visible style for that element replaces it in this stylesheet, so a keyboard user cannot see where focus is. Draw a focus ring (outline, box-shadow or border) under :focus-visible. — examples/todos/todos.css:46
What to do
- Keep a visible focus style (don't remove the outline without a replacement), guard animation with prefers-reduced-motion, and raise low-contrast colour pairs to at least 4.5:1.
AX10 · Code composition
AX3 · Project dependency cycles
AX4 · Dependency direction
GD1 · Unfinished & placeholder code
IC1 · Incompleteness & stubs
M1 · Documentation (README)
What to do
- Add a build/run (quick start) section to the root README — the first thing a newcomer needs.
- Explain in the README how to run the tests. Add a section called Testing to the README in the repository's top folder, saying how to run the test suite.
M2 · Architecture documentation
- No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
- No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.
What to do
- Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
- Add a C4 context/container diagram (Structurizr, PlantUML or Mermaid) or an architecture.md overview.
M3 · Folder & project structure
- Most of the production code is in directories of its own, but 3 application file(s) sit at the repository root beside the build and tooling files (`backbone-min.js`, `REDACTED`, `debug-info.js`).
M4 · Documentation accuracy
P1 · CI/CD gates
P10 · Library API & versioning
P3 · Security & performance tooling
- No static application security testing detected. For this repository's stack, add CodeQL's javascript-typescript pack, `semgrep --config=p/javascript`, or eslint-plugin-security as a CI step. What was searched, so you can tell an absence from a miss: the 1 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner. — REDACTED:7
- `package.json` declares packages, and nothing in the repository keeps them current: no Dependabot or Renovate configuration that schedules updates, and no dependency-review gate on pull requests. A pinned dependency stays at the version it was added at until someone notices — including after an advisory is published against it. Add a `.github/dependabot.yml` with one `package-ecosystem` entry per ecosystem the tree uses (or an enabled `renovate.json`), and gate pull requests with `actions/dependency-review-action`. — package.json:15
What to do
- Add a SAST step to CI running what this repository's stack ships: CodeQL's javascript-typescript pack, `semgrep --config=p/javascript`, or eslint-plugin-security — so a security regression fails the build instead of landing.
- Enable Dependabot/Renovate or a dependency-review gate.
- Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
P6 · Release Hygiene
- No CHANGELOG/HISTORY/RELEASES file — what shipped when isn't easy to reconstruct for support or audit. (Versioning/tagging makes releases traceable, but a changelog records the what.)
What to do
- Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release.
R1 · Type Safety
- 0 typed · 15 plain JS — the untyped files are REDACTED, debug-info.js, karma.conf-sauce.js, karma.conf.js, modules/debug-info.js, test/collection.js (+9 more).
What to do
- Adopt TypeScript for the frontend: add a typecheck step to the build, then either type-check the existing JavaScript in place (`checkJs`/JSDoc types) or convert the highest-traffic modules first — no file is typed today, so this is an adoption, not a clean-up.
R10 · Code Duplication
- REDACTED:678 · REDACTED:1132 — all 2 copies are in the same file, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — REDACTED:678
- REDACTED:1993 · REDACTED:2014 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. — REDACTED:1993
What to do
- Act on each finding's own remediation rather than one rule: the move depends on what recurs. Where the copies are executable blocks, give the shared part one home and call it from each site; where they are declarations, a listing, a specialisation already delegating to its base, or one shape repeated per entity, there is no call site and the move is a shared type, a generated set or a factory — sometimes there is nothing to extract.
R2 · Cyclomatic Complexity
- set has cyclomatic complexity 45 and cognitive complexity 69; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — REDACTED:907
- start has cyclomatic complexity 23 and cognitive complexity 23; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — REDACTED:1936
- sync has cyclomatic complexity 19 and cognitive complexity 17; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive sits below cyclomatic here, so much of the count is breadth — arms side by side rather than stacked — and splitting per arm would leave a function per arm; group the work between the checks into named steps instead. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — REDACTED:1661
- set has cyclomatic complexity 18 and cognitive complexity 26; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — REDACTED:540
- offApi has cyclomatic complexity 17 and cognitive complexity 25; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — REDACTED:284
- navigate has cyclomatic complexity 17 and cognitive complexity 21; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — REDACTED:2091
- (anonymous) has cyclomatic complexity 15 and cognitive complexity 13; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive sits below cyclomatic here, so much of the count is breadth — arms side by side rather than stacked — and splitting per arm would leave a function per arm; group the work between the checks into named steps instead. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — REDACTED:8
- save has cyclomatic complexity 13 and cognitive complexity 14; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive is at or above cyclomatic here, so the branching is nested or entangled rather than laid out side by side — extracting each decision into its own named function is the change that pays. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — REDACTED:689
R3 · Large Files
- REDACTED has 1906 significant lines (blank lines excluded), over the 400-line bar, and contains logic — a file this long is usually several responsibilities in one module. — REDACTED:1
What to do
- Split each oversized file along the responsibilities already in it, into smaller focused modules in the same package.
R5 · Dependency Freshness
R6 · Tooling
- test ✓ · lint ✓ · typecheck ✗ — read from this repository's package.json scripts and corroborated against its CI workflows. A script counts when its name or command matches the step: `test` for the suite, `lint` or `prettier` for linting, `typecheck`/`type-check`/`tsc` for type checking. ✗ therefore means no script or CI step under those names was found, NOT that the step is absent from your pipeline — a task invoked by a runner this check does not read, or named something else entirely, is not seen and is worth confirming before acting on a cross. A ✓ means the wiring is DECLARED — a script or CI step under those names exists. It is not a statement that the step passes, or that it runs at all: nothing here installs a dependency or executes a suite.
What to do
- Add type checking (adopt TypeScript, or type-check the existing JavaScript with `checkJs`) as package.json scripts and run them in CI.
R7 · Dead Code
- Unreachable from the 13 application, 2 tooling and 10 test entry point(s) detected in this repo. Gate removals on `npm run build` — an undetected custom entry would make these reachable.
- no import path from any entry point (13 application, 2 tooling, 10 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make — karma.conf-sauce.js
What to do
- Delete the dead files and unused exports — every line is maintenance cost and rebuild-estimate inflation with zero runtime value.
R8 · Dependency Hygiene
R9 · Circular Imports
X12 · Unreachable branch
X16 · Unfloored truncation loop
X21 · Side-effecting pattern guard
X3 · Exception handling
- An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it. — REDACTED:32
What to do
- Swallowed exception (empty catch)
WCAG coverage — what static analysis assessed
| Dimension | WCAG 2.2 A/AA criteria | Coverage |
|---|---|---|
| AC1 · Text alternatives | 1.1.1, 1.2.2, 1.2.5 | Partial signal |
| AC2 · Forms & labels | 1.3.1, 3.3.2, 4.1.2 | Partial signal |
| AC3 · Page structure | 1.4.4, 2.2.1, 2.4.1, 2.4.2, 3.1.1, 4.1.2 | Partial signal |
| AC6 · Visual & motion safety | 1.4.3, 2.4.7 | Partial — literal CSS only |
Reference — by lens
| Lens | Score | Rating | Impact |
|---|---|---|---|
| Code Health | 42% | Weak — gated by R1, R3, X3 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Architecture | 100% | Exemplary | Strongest area. |
| Maturity | 51% | Adequate — gated by M2 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Readiness | 57% | Adequate — gated by P3 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Security | 76% | Adequate — gated by D29 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Accessibility | 76% | Strong | Solid. |
Unscored — 1 check(s) recorded observations but carry no score
- D36 Supply-chain Provenance & Signing — 1 observation(s) recorded · The CI pipeline publishes no artifact — no package publish, container push or release with files to download. Supply-chain provenance, signing and an SBOM describe a PUBLISHED artifact for the people who obtain it, so there is nothing to attest here; a deployment of the service itself publishes nothing for anyone else to verify. Add them to the release pipeline when this repo starts publishing artifacts (a package, a container image, or a release with downloadable files). Build integrity and workflow-token hygiene are reported below: they describe what the CI runs and the token it runs with, neither of which is affected by whether the pipeline ships an artifact.
Not evidenced — 2 control(s) we could not find positive evidence for
- P4 Deployment & Rollback — not evidenced — no deploy/rollback/approval signal in the repo; absence of evidence is not evidence of a manual release
- P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
Not included — 75 check(s) not relevant to this codebase
- AC4 Keyboard semantics — No interactive element found in the parsed markup — AC4 not applicable here.
- AC5 ARIA correctness — No ARIA usage found in the parsed markup — AC5 not applicable here.
- AX1 Captive dependencies — Not applicable: this repository's JavaScript imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's.
- AX2 Stateful singletons — Not applicable: TypeScript/JavaScript runs each process's requests on one event loop, so no two requests write a shared object at the same instant (interleaving across an await is a different defect).
- AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX6 Interface segregation — not applicable — JavaScript has no interface declaration, so there is no declared member list whose width this check could measure
- AX7 Slice cohesion — not applicable — not a vertical-slice architecture
- AX8 Test isolation — no test/production split to check
- AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
- AXB1 Runtime evidence locked — no reproducible boot — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- C1 Data Protection — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a TypeORM/MikroORM/sequelize-typescript/NestJS-Mongoose entity, a Mongoose schema, a Sequelize or Drizzle table, a Knex migration or a Prisma model — and no database or data-store client in the source either, so this repository keeps no data at rest for these controls to protect. If it does persist personal data (through a hosted backend configured outside this repository, for instance), the controls belong to wherever that data is stored.
- C2 Access Controls — No access-control surface detected in the analyzed source — this repository stands up no server (no Express, Fastify, Koa, Hono, NestJS or similar app, no Next.js/SvelteKit/Nuxt server route, no edge function), creates no Supabase tables and talks to no hosted backend. Access control is therefore N/A here — a browser application or library is authorized by the server it calls, not by itself; a client-side route guard hides a page and authorizes nothing. If this codebase grows request handlers, the dimension reactivates and a default-deny posture is expected then.
- C3 Audit Trail — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a TypeORM/MikroORM/sequelize-typescript/NestJS-Mongoose entity, a Mongoose schema, a Sequelize or Drizzle table, a Knex migration or a Prisma model — and no database or data-store client in the source either, so this repository keeps no sensitive data whose changes an audit trail would record. If it does (through a hosted backend configured outside this repository, for instance), the trail belongs to wherever that data is stored.
- C4 Data Retention — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a TypeORM/MikroORM/sequelize-typescript/NestJS-Mongoose entity, a Mongoose schema, a Sequelize or Drizzle table, a Knex migration or a Prisma model — and no database or data-store client in the source either, so this repository keeps no personal data whose lifetime a retention limit would bound. If it does (through a hosted backend configured outside this repository, for instance), the limit belongs wherever that data is stored.
- C5 Data-Subject Rights — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a TypeORM/MikroORM/sequelize-typescript/NestJS-Mongoose entity, a Mongoose schema, a Sequelize or Drizzle table, a Knex migration or a Prisma model — and no database or data-store client in the source either, so this repository keeps no personal data for a data subject to erase, export or consent over. If it does (through a hosted backend configured outside this repository, for instance), the rights are served wherever that data is stored.
- D10 Test Quality — ~5742 lines of test source are present (.js) but no test cases reached the test census for this repository — no test root we could resolve declared them, or the files we read declare no cases in a test framework we recognise — so skipped/assertion-free tests couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
- D11 Test Reliability — Test reliability not included — no browser-driven test runner (karma)
- D17 Explicit Debt — explicit-debt markers are read through a C# workspace today, so they were not read for this repository's language — this asserts nothing about how many markers the code carries. Not scored — this is a gap in the analyzer, not a finding about this repository
- D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
- D20 ADR Quality — N/A — ADRs are expected on deployable products with a user-facing host, not consumed libraries; no ADR log is required here.
- D21 Naming Consistency — D21 withholds its case and prefix conventions rows: 1 candidate(s) found and not reported.
- D22 Internal API Consistency — The exposed public-API surface could not be collected — no C#/VB projects loaded.
- D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ sibling projects each declaring an entity of their own or taking another project's integration events. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
- D25 ADR Conformance — no ADRs to check
- D27 Navigability — symbol resolution incomplete — navigability not assessed
- D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.
- D32 Data Compliance (PII/GDPR) — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.
- D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
- D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
- D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
- D5 Coupling — Not applicable — this npm build ships 1 production module(s), so there is no coupling BETWEEN modules to measure. (Its test and non-production modules are not part of the shipped graph.)
- D6 Cohesion (LCOM4) — No production classes were analyzable, so cohesion (LCOM4) was not measured (the solution likely failed to load or has no production code).
- D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
- D8 Code Coverage — Coverage not measured — JavaScript/TypeScript suite
- DM1 Domain Modelling — not scored — this repository shows none of the 3 signals this lens looks for
- ED1 Event-Driven — not scored — this repository shows none of the 3 signals this lens looks for
- ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
- ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
- P12 CI test-gate honesty — Reported, not scored — and nothing was matched here. The coverage check applies to any stack, and the automatic-re-run check to any GitHub-Actions workflow, but the checks for excluded tests, skipped tests and sleep-based synchronisation currently recognise only some ecosystems' test-runner idioms, so on a repository built with another stack the zeros below mean 'not checked', not 'clean'.
- P2 Observability — This repository's JavaScript/TypeScript source (2 module(s), 8 file(s) read) declares no entry point and bootstraps no server, and nothing here deploys a service — it is a library, run inside whatever hosts it, so production observability (structured logging, tracing/metrics, health checks) is N/A. If it grows a binary or a service, the dimension reactivates.
- P7 Outbound HTTP resilience — not applicable — no HTTP server, API framework or worker entry point was found in the JavaScript/TypeScript source, so there is no service whose uptime a failing dependency could take down
- P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
- P9 Domain vs controller coverage — coverage not measured: this check compares the coverage of the analyzer's own test run across the domain and web layers, and that run measured none here — Test coverage (D8) says why
- PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for tinybench, mitata, benchmark.js, benny or vitest `bench(...)` calls in files that import them (or `*.bench.*` files), or one of those in a package.json, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
- PF2 Allocation hygiene — Not scored: this check counted allocation-aware idioms (Span, pools, stackalloc) per line, which describes what kind of code a repository is rather than whether it has an allocation problem, so it was withdrawn. Nothing here is a finding about your code.
- PF3 Async & latency hygiene — Not applicable: this repository declares no async functions, so there is no asynchronous code for a blocking call to stall.
- R11 Import Boundaries — No recognizable feature-sliced/layered src layout — boundary rules not applicable.
- R4 Test Coverage — 10 test file(s) reach none of 2 production file(s) via imports — exercised outside the JS import graph (integration/bundled), not import-reachable
- S1 Web-Security Posture — Not assessed: 7 JavaScript/TypeScript file(s) were read for weak hashes and ciphers, key material fixed in the source, disabled TLS certificate validation, obsolete TLS versions, passwords stored or checked as plaintext and session cookies set without HttpOnly, Secure or SameSite, and none was found. That half of the dimension is clean, but it is not scored on its own: a C# repository with the same clean reading is scored on its server controls as well, or is N/A for having no web surface, and neither can be decided here. Of the server controls, two are read where the source shows them: every session or sign-in cookie the code sets is read for HttpOnly, Secure and SameSite at the line that sets it (a raw `Set-Cookie` header, Express, Fastify, Hono, Koa, Next.js, `cookie.serialize`, express-session and cookie-session), and every Node listener for HTTPS enforcement. HSTS, security response headers and input validation are NOT assessed for JavaScript/TypeScript: each is scored as an absence, an absence is only reportable over the production HTTP server, and in this ecosystem the file that opens the port is build output or a framework launcher rather than a file in the source tree. Their absence here is not a finding about this repository.
- SC1 Supply-chain hygiene — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X1 Async correctness — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X10 Duplicated predicate — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X13 Undrained process stream — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X14 Bypassable address classification — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X15 Unvalidated length from an untrusted reader — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X17 Uncapped recursion over a caller-supplied document — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X18 Disposal-pattern correctness — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X19 Unrestored process-global state — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X2 Cancellation propagation — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X20 Mistyped argument guard — This check asks whether an argument guard reports an EMPTY value as a NULL one, which needs a language that throws a null-specific argument exception — .NET's ArgumentNullException, the JVM's NullPointerException, Dart's ArgumentError.notNull. This repository contains none of those languages: the ones it is written in have a single exception for a bad argument, so there is no pair of exceptions to confuse and nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
- X22 Contradicted release guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X23 Unguarded diagnostic materialisation — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X24 Document value interpolated into markup unescaped — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X25 Inert configuration knob — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X26 Unsynchronised callback handoff — Not applicable: this check looks for a collection written by a callback on one thread while the body waiting on it touches it on another, and in this repository's languages no collection is reachable from two threads at once. TypeScript/JavaScript runs every callback on the one thread that owns its objects: a callback runs only when the body waiting on it has yielded, never alongside it, and a worker thread receives a COPY of what it is sent. A SharedArrayBuffer carries raw bytes, never an Array, Map or Set, so no collection is reachable from two threads at once. Not a gap in the analyzer and not a finding about your code.
- X27 Collection changed while being enumerated — Not applicable: this check looks for a loop whose body adds to or removes from the very collection the loop is walking, invalidating the enumerator it holds, and in this repository's languages that cannot happen. JavaScript and TypeScript have no iterator that a change can invalidate: an `Array` is walked by index against its live length, and a `Map` or `Set` by the ECMAScript specification's live entry list, so a body that adds to, removes from or empties what it walks raises nothing — every loop form (`for…of`, `for…in`, `forEach`, `map`, `filter`, `reduce`, `entries()`) on every built-in collection (`Array`, `Map`, `Set`, plain objects, `URLSearchParams`, `Headers`, `FormData`) runs to completion. Such a loop can still skip an element or never end, which is a different defect and not the one this check asks about. Not a gap in the analyzer and not a finding about your code.
- X28 Index access outside its own emptiness guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X29 Per-element action decided by a fixed element — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X30 Support guard that admits what it rejects — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
- X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
- X4 Structured logging — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X5 Nullable reference types — Not applicable: this check asks whether the null-typed discipline a language offers is switched on, and how much of that the assertion operator takes back, and in this repository's languages there is no such switch and no such operator. Plain JavaScript carries no type annotations and commits no tsconfig, so it states no null-typed discipline for this check to grade: there is nothing here that switches null checking on or off, and TypeScript (or `// @ts-check`) is how a repository acquires one — advice, not a defect this card measures. Not a gap in the analyzer and not a finding about your code.
- X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X7 Silent fallback defaults — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Appendix A — Findings (grouped)
Critical — 19 finding(s)
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- <input> without a programmatic label REDACTED:310
- <html> without a lang REDACTED:2
Serious — 45 finding(s)
- REDACTED
- REDACTED
- REDACTED
- Duplicated block (8 lines × 2 locations) REDACTED:678
- Duplicated block (8 lines × 2 locations) REDACTED:1993
- Page without a main landmark REDACTED:2
- Data table has no header cells REDACTED:610
- Focus outline removed in CSS without a :focus replacement examples/todos/todos.css:46
- set (cyclomatic 45) REDACTED:907
- start (cyclomatic 23) REDACTED:1936
- backbone.Backbone.sync (cyclomatic 21) REDACTED:1661
- jquery.lazyload.$.fn.lazyload (cyclomatic 19) docs/js/jquery.lazyload.js:19
- set (cyclomatic 18) REDACTED:540
- save (cyclomatic 18) REDACTED:689
- backbone.offApi (cyclomatic 17) REDACTED:284
- navigate (cyclomatic 17) REDACTED:2091
- Deprecated: eslint package.json:30
- Floating npm dependency: underscore
- set (cognitive 69) REDACTED:907
- set (cognitive 26) REDACTED:540
- offApi (cognitive 25) REDACTED:284
- jquery.lazyload.$.fn.lazyload (cognitive 24) docs/js/jquery.lazyload.js:19
- start (cognitive 23) REDACTED:1936
- navigate (cognitive 21) REDACTED:2091
- sync (cognitive 20) REDACTED:1661
- save (cognitive 19) REDACTED:689
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- FileTooLong: REDACTED REDACTED
- REDACTED
- Type Safety
- Complex function set (cyclomatic 45, cognitive 69) REDACTED:907
- Complex function start (cyclomatic 23, cognitive 23) REDACTED:1936
- Complex function sync (cyclomatic 19, cognitive 17) REDACTED:1661
- Complex function set (cyclomatic 18, cognitive 26) REDACTED:540
- Complex function offApi (cyclomatic 17, cognitive 25) REDACTED:284
- Complex function navigate (cyclomatic 17, cognitive 21) REDACTED:2091
- Complex function (anonymous) (cyclomatic 15, cognitive 13) REDACTED:8
- Complex function save (cyclomatic 13, cognitive 14) REDACTED:689
- REDACTED: 1906 lines of code REDACTED:1
- No typecheck script
- Dead file (~99 LoC) karma.conf-sauce.js
- Swallowed exception (empty catch) REDACTED:32
Minor — 265 finding(s)
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- Off-boarding risk: anonymized user #1
- redundant comment REDACTED:2195
- REDACTED
- No ADRs
- No architecture diagram/doc
- No src/ separation
- No SAST REDACTED:7
- No dependency-update automation package.json:15
- No changelog
Minor — 1 finding(s)
- Outdated (npm): underscore
Appendix B — Reproduction & audit trail
| Dimension | Tool | Version | Command | Findings | Raw output |
|---|---|---|---|---|---|
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-b48242db997349e3ad14a00ee2052372/history.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-b48242db997349e3ad14a00ee2052372/tree.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-tree.json |
| D29 · Static Analysis (SAST) | semgrep | — | semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/canine-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off --exclude *.arrow --exclude *.avro --exclude *.csv --exclude *.dat --exclude *.db --exclude *.feather --exclude *.geojson --exclude *.h5 --exclude *.hdf5 --exclude *.jsonl --exclude *.log --exclude *.ndjson --exclude *.npy --exclude *.npz --exclude *.orc --exclude *.parquet --exclude *.pickle --exclude *.pkl --exclude *.psv --exclude *.sqlite --exclude *.sqlite3 --exclude *.tfrecord --exclude *.tsv --exclude *.txt . | 264 | artifacts/raw/semgrep.json |
| D30 · Dependency Vulnerabilities | trivy | — | trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs **/bin/** --skip-dirs **/obj/** . | 18 | artifacts/raw/trivy-fs.json |
| D31 · IaC & Container Security | trivy | — | trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan. | 0 | — |
| D32 · Data Compliance (PII/GDPR) | semgrep | — | semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that. | 0 | — |
| D40 · Network Egress Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here. | 0 | — |
| D41 · Kernel & Syscall Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here. | 0 | — |
| D42 · Runtime Threat Enforcement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here. | 0 | — |
| D43 · Malicious Dependencies | trivy | — | trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs **/bin/** --skip-dirs **/obj/** . | 0 | artifacts/raw/trivy-fs.json |