Public report of heckmon/roxum-ide, published 16 November 2026. It has the same score, grades and number of
findings as the full report. The details of security findings (where they are in the code, which known
vulnerabilities and which passwords or keys were found) are left out, so nobody can use them against the project.
Public
Executive reportMeasured under the Code Assurance Index, an open standard for code quality, using its published scoring rules (rubric version 2026.11.4). Assert signed this survey and filed it in the standard's public register, where anyone can look it up by its survey ID. Check this survey →
Signed and filed in the standard's public register, 16 November 2026, 19:57 UTC · Survey ID cd_033660f05214419ebad013445286a7cc
heckmon/roxum-ide
Measured 16 November 2026, 19:57 UTC, at code version 875198c
First survey, so nothing to compare with yet
CAI scoreWeak
CriticalWeakAdequateStrongExemplary
The score is built from these lenses. Each lens grades one area of the code, such as how easy it is to change or how well it is protected. The weakest lens counts most, so one weak area pulls the score down instead of being averaged away.
A medium codebase: 48,068 lines of product code in 23 projects, tests not counted · Estimated rebuild effort: about 0.3 person-years · Weakest lens: Production Readiness, 34.5
Findings by how serious they are
7 critical526 serious30 minor
6 dimensions are left out of the score. For each one, we either couldn't measure it in this code, or found no evidence of the safeguard we look for, such as a tested backup restore. They count neither for nor against the score, and Limitations lists each one with its reason.
This survey was produced by
Canine Code Analyzer
Producer
Canine Development
Analyzer
Canine Code Analyzer engine 1.0.0
Measured
16 November 2026, 19:57 UTC
A measurement, not a certificate. The Code Assurance Index records a number
together with the evidence it was worked out from, so anyone can recalculate it, but it doesn't certify or guarantee
the code. The standard was written by Canine Development, which also builds the Canine Code Analyzer. It is open to any tool that
implements it, and today the Canine Code Analyzer is the only one that does.
The score is deterministic, which means the same code always gets the same score. We work it out with tools that follow published rules, and an AI model never decides it, so anyone who applies the same rules to the same code gets the same number. How it is done is explained under Methodology ▸
54of 54 dimensions measured by tools.
551of 563 findings point to an exact file and line, so you can open each one in the code. The other 12 concern the repository as a whole, such as missing documentation.
54dimensions across 6 lenses, read from 48,068 lines of product code in 23 projects.
heckmon/roxum-ide falls short of our standard for production because the project has no automated tests and we found no automated security scanning of the code, its secrets or its dependencies. It scores 41.7 out of 100 and is rated Weak, and six of its seven critical findings are security problems in the build pipeline.
Production Readiness, at 34.5, is the weakest lens and counts most in the score. The best first step for the work it takes is recording design decisions, worth about 3.3 points. Adding automated security scanning would lift Production Readiness itself, worth about 4.5 points. Raising Production Readiness to 70 would lift the score to about 48.1.
Five pipeline tools are referenced by a changeable name, so the build pipeline can be tampered with. One secret can leak from the build pipeline, and the project has no automated tests, so a change can break it without warning. Pinning each tool to an exact version, limiting the secret to its own step and adding automated tests would close these risks.
The product code is 48,068 lines, about €41,000 to rebuild.
A lens is capped at Adequate while one of its dimensions scores below 4 out of 10, however well the rest of the lens does. That way a serious problem in one place always shows in the lens's rating.
How the score is built: what each lens counts forThe lenses don't count equally. The weakest lens counts most, the next weakest a little less, and so on, so a weak area pulls the score down instead of being averaged away. In the bar below, each part's width shows how much that lens counts and its colour shows its rating. Improving the widest part moves the score most, and as that lens improves, it counts for less, because another lens becomes the weakest.
If Production Readiness rose from 34.5 to 70, the lowest score rated Strong, the score would rise from 41.7 to about 48.1.
Code composition: what the lines of code are
Product code 100%
Rebuild cost: about €41,000 · Estimate
Cost to rebuild
€14,000 to €69,000, for 228 to 722 hours of work, about 0.3 person-years for one engineer
Difficulty of the problem
Standard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write.
Quality factor
×0.7 at a score of 42. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it.
Size
Medium: 48,068 lines of product code
What it is not
Not a quotation: nobody has offered to build it for that. Not a valuation: it says nothing about what the business is worth. Not a certified figure: no professional has signed it as one.
How the estimate is made: We price the hours a team would need to write this code again, at €60 to €95 an hour. Declarations and boilerplate are priced at a fast rate and logic at a slower one, and the logic is then multiplied by the difficulty of the problem and by the quality factor. The estimate can be about 30% off either way, and it moves most with the hourly rate and the difficulty. For this code, every line is priced as straight logic, which keeps the estimate on the low side.
Top priorities
The three actions that raise the score most for the work they take. The full ranked list is in the Roadmap.
1
Resolve the 1 No ADRs found finding(s) in ADR Quality — start with main.dart.
Raises the score by about 3.3 points · Low effort · ADR Quality
2
Protect endpoints by default-deny: a global authentication guard or middleware with explicit public opt-outs, or a guard on every route, plus named role/permission rules for what an authenticated caller may do.
Raises the score by about 5.1 points · Medium effort · Access Controls
3
Add a SAST step to CI running what this repository's stack ships: the Dart analyzer's security lints plus `semgrep --config=auto` — so a security regression fails the build instead of landing.
Each conclusion below combines several dimensions into one point that no single dimension shows, and lists the measurements it rests on.
Where the investment is most exposed · Value at risk
This code would cost about €41,000 to build again, about 0.3 person-years of work. Its weakest lens is Production Readiness, at 34.5 (Weak). Production Readiness is about whether the product is ready to run in production and to change without breaking. Because the weakest lens counts most in the score, work on Production Readiness also moves the score most.
Based on: the rebuild estimate · the Production Readiness grade · how much each lens counts
What to do: Start with the Production Readiness actions in Top priorities.
If you do one thing first · First action
Resolve the 1 No ADRs found finding(s) in ADR Quality. Of all the actions in this report, it raises the score most for the work it takes: about 3.3 points for low effort, because it clears the 1 ADR Quality findings. The next survey will show the change in the score.
Based on: the ranked actions in Top priorities, by score gain and effort
What hard-to-read code costs each year · Cost
Four dimensions measure how easy the code is to work in: two measure how tangled its logic is, one how much of it is copied, and one how well each part sticks to a single job. In this codebase they average 4.2 out of 10. Code at that level is slower to change than clean code, and we estimate the extra work at 10% to 22% on every change. The history of the code shows how much it changes: about 5,770 lines over the last 90 days, which is about 23,401 lines a year. At that pace, the extra work comes to an estimated 5.6 to 33.8 engineer-days a year, and it grows as more code changes.
How this is estimated: The number of changed lines is measured from the history of the code. The rest rests on two assumptions of our own: code scoring 8 out of 10 or more adds no extra work, and each point below 8 adds 2.5% to 5.6% to every change, never less than 2% to 5% and never more than 40% to 60% in all; and an engineer changes 150 to 400 lines in a day. The result is a range for planning, not a measurement.
Based on: Cyclomatic Complexity · Cognitive Complexity · Code Duplication · Cohesion (LCOM4) · the code's change history
What to do: Start with the files listed under Churn × Complexity Hotspots, which change often and are hard to read, because that is where the extra work is paid most often.
Architecture — module dependency graph
Project dependencies, layered top-to-bottom; arrows show direction. Any dashed red edge points upward or sideways, which only happens where the projects form a dependency cycle. A graph without cycles has none.
Architecture: which parts of the code depend on which
The code is divided into modules, groups of code that each handle one part of the product, and a module depends on another when it uses code from it. The table lists the modules both down the side and across the top, in an order where each module should only use modules listed above it. A number in a cell means the module on that row uses the module in that column, and it counts the pairs of building blocks (types) that connect them. The one thing to look for is a mark above the diagonal line. It means two or more modules use each other in a loop (a dependency cycle), so none of them can be changed, tested or released on its own.
8 modules, with 6 dependencies between them. One loop runs through 2 of the modules, marked above the diagonal.
Which modules use which. The module on each row uses the module in each column, and the number counts the pairs of types that connect them. A cell above the diagonal is part of a loop.
com.roxum uses com.roxum.MainActivity, so a change to com.roxum.MainActivity can break com.roxum, while a change to com.roxum can't break com.roxum.MainActivity.
Position
Below the diagonal: com.roxum uses a module listed above it, which is the healthy direction.
5→6 repository.terminal uses repository.utilspart of a loop✕
Connections
1 pair of types, where a type in repository.terminal uses a type in repository.utils.
repository.terminal uses repository.utils, so a change to repository.utils can break repository.terminal, while a change to repository.terminal can't break repository.utils.
Position
Above the diagonal, so it is part of a loop. Neither module can be changed, tested or released on its own until one of these dependencies is removed.
repository.utils uses repository.terminal, so a change to repository.terminal can break repository.utils, while a change to repository.utils can't break repository.terminal.
Position
Below the diagonal: repository.utils uses a module listed above it, which is the healthy direction.
repository.bloc uses repository.utils, so a change to repository.utils can break repository.bloc, while a change to repository.bloc can't break repository.utils.
Position
Below the diagonal: repository.bloc uses a module listed above it, which is the healthy direction.
34 pairs of types, where a type in repository.ui uses a type in repository.utils. Showing 25 of them; the rest are in namespace-graph.json in this report's bundle.
repository.ui uses repository.utils, so a change to repository.utils can break repository.ui, while a change to repository.ui can't break repository.utils.
Position
Below the diagonal: repository.ui uses a module listed above it, which is the healthy direction.
repository.ui uses repository.bloc, so a change to repository.bloc can break repository.ui, while a change to repository.ui can't break repository.bloc.
Position
Below the diagonal: repository.ui uses a module listed above it, which is the healthy direction.
At a glance — Code Health · 65.8 · Adequate · gated by D1, D2, D4, X3 ·
Findings mapped to OWASP categories; the specific CVEs/secrets are in the Security dimension cards below and findings.md (redacted only on the public version of this report).
OWASP category
Findings
Severity
A05:2025 — Injection
9
High / Critical
A03:2025 — Software Supply Chain Failures
4
Medium
Roadmap
Top priorities: Resolve the 1 No automated tests finding(s) in Code Coverage; Protect endpoints by default-deny: a global authentication guard or middleware with explicit public opt-outs, or a guard on every route, plus named role/permission rules for what an authenticated caller may do; Add a SAST step to CI running what this repository's stack ships: the Dart analyzer's security lints plus `semgrep --config=auto` — so a security regression fails the build instead of landing.
Ranked by impact ÷ effort. "Helps" is the estimated gain on the 0–100 health score.
Do this
Helps
Effort
Dimension
Resolve the 1 No ADRs found finding(s) in ADR Quality — start with main.dart.
Protect endpoints by default-deny: a global authentication guard or middleware with explicit public opt-outs, or a guard on every route, plus named role/permission rules for what an authenticated caller may do.
Add a SAST step to CI running what this repository's stack ships: the Dart analyzer's security lints plus `semgrep --config=auto` — so a security regression fails the build instead of landing.
Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
Secure the server's transport: serve TLS itself (`HttpServer.bindSecure(…, context)`, or `shelf_io.serve(…, securityContext: context)`), or run it behind a TLS-terminating proxy and check `X-Forwarded-Proto`; send `Strict-Transport-Security` once it is HTTPS-only. A server only this device needs to reach should bind `InternetAddress.loopbackIPv4` instead.
Nothing pauses a release for a human: publish as a draft release (or gate the release job on a protected tag/manual dispatch) so a bad build can be stopped before users can download it.
Every finding carries one of four grades. Three say how serious it is. The fourth says this
survey could not settle it — and it is a grade, not a gap.
Critical — 7
A definite problem that already costs you something and drags the score down: a
missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here
tends to cause failures elsewhere.
Serious — 526
Likely wrong, but not failing yet. It degrades
the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to
carry for two years either.
Minor — 30
Recorded, with no effect on how the codebase functions.
Present so the survey is complete, not because it needs doing.
Could not be resolved — 6
Something this survey could not settle
from the outside, and which could be critical or serious. Either a control was required and no
positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves
nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean
result. These are excluded from the score rather than awarded a pass, so the number on the cover neither
rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each
one is named under Limitations.
Methodology & how to trust this report
This survey is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. All 54 evaluated dimensions are computed by tools and static analysis; no language model sets or judges any of them. Overall confidence is 1.0, the weighted average across measured dimensions.
Every figure here is one of two kinds, and we label which: ✓ Measured — a deterministic fact (LoC, complexity, coverage); ~ Modeled — an estimate from a stated model (cost, effort, value-at-risk), always a range with its assumptions, never a precise fact. We never present a modelled estimate as if it were measured. Perfect or absent scores carry their provenance too (ADR-0011): ✓ Tool-verified means the property itself was measured across the surface; ○ Nothing flagged means the probes came back clean — a claim bounded by what a repository can show; ⊘ Not evidenced means a working control (a tested restore, an automated rollback) showed no positive evidence — absence of evidence is not evidence of a control, so it's excluded from the score rather than awarded a spurious 10.
What we checked — 54 dimensions across the health lenses
Each chip is a dimension scored from real signals across architecture, testing, dependencies, security & compliance, documentation, git-history and code quality — in one coherent pass. A surface report typically covers a handful.
How to trust any code-health report — three questions
Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 551 of 563 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line. (Every path in this report is repo-relative by construction: paths are normalized at the producer and the report is rejected if any rooted path leaks through.)
Is there a tool behind the number? Every score below names the method that produced it: Roslyn, git or a scanner, not a narrative.
Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.
This report answers yes to all three. That's the bar to hold any assessment to.
Tools & methods
The actual versions used this run (captured at analysis time) — re-run on the same commit for the identical score.
Method
Backs
Version
Evaluator
Roslyn static analysis
Complexity, cohesion, coupling, dead code, API surface, layering
What ran differently this time — a tool absent, degraded, or that fell back to an estimate. Named openly, not folded silently into the scores. A degraded run also records its exact cause in diagnostics.md.
D12 Dependency Hygiene — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Not scored — 22 Maven/Gradle manifest(s) were read, stating a version for 22 dependency(ies) and leaving 0 to a parent or an imported BOM, but no build resolved the dependency graph, so the outdated signal was not established. NOT a finding that these dependencies are current or healthy.
D14 License Compliance — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. This repository declares a Gradle build (build.gradle/build.gradle.kts), but the licence verdict published here was taken over its pub package dependencies. Nothing was read about its Gradle dependencies' licensing in either direction, and a clean score on this card must not be read as covering them.
D16 Bus Factor — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Single-maintainer repository — bus factor is not applicable (3 contributor(s) across 243 commit(s) sampled, automation and bot accounts excluded). One of them holds 99% of the history; the other 2 hold 0.5% each on average, below the 5% at which there is somebody to hand the work to. That is a single maintainer with drive-by contributors, not a team whose knowledge has concentrated — so the bus factor is not applicable and there is nothing here for the owner to act on.
D19 Documentation Quality — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. Each ecosystem's manifests (what makes a folder runnable or a published package) need their own proof before D19 judges its units. Until then those folders' READMEs are judged only as documents (boilerplate, structure), never counted as complete.
D19 Documentation Quality — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. This kind did not reach the 95 % precision gate in three adjudicated runs (docs/plans/deterministic-engine/adjudication/D19-sample3-v3.md), so by the pre-registered fallback it publishes no row until a re-measurement shows it does. The candidates are counted here, not reported as findings, and the score does not include them.
D21 Naming Consistency — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. PREREGISTRATION version 20's fallback (adjudication D21-sample3-v3): this rule kind was adjudicated below the 95 % precision gate, so its candidates are counted here and not published, and the score covers only the acronym-spelling and awaitable-suffix rules. The kind returns as rows only after it shows a measured precision; this says nothing about whether these names are consistent.
D22 Internal API Consistency — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. This repository's source is written only in languages whose packages are published through a manifest, and no manifest in the tree makes a publication act: either there is no package manifest of any ecosystem (no package.json, pyproject.toml, setup.py, gemspec, Cargo.toml, pom.xml, build.gradle, composer.json, pubspec.yaml or mix.exs), or every one present declares in its package manager's own terms that it is not published (an npm package marked "private": true, a Cargo package with publish = false, a pubspec with publish_to: none, a Composer "project", a Poetry project with package-mode = false, or the "Private :: Do Not Upload" classifier). With no publication act there is no intentionally-exposed surface for API consistency to be judged over.
D24 Comment Value — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check's reader does not cover the language this repository's product is written in, so it had nothing of the product to read. That is a gap in this analyzer's language reach — not a finding about this repository.
D27 Navigability — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Navigability is taken over call sites whose callee resolved. For C# that population includes calls into referenced assemblies; for this language only calls declared inside the repository count, so the abstention threshold reads the repository's use of its standard library as a resolution failure. That is a limit of this analyzer, not a build problem in this repository.
D32 Data Compliance (PII/GDPR) — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. `assets/webview/eruda.js` produced a parse error, so every rule in this engine's `gdpr.yml` was absent there. That absence is NOT a clean result: these rules detect personal data crossing a boundary into a log sink, a URL or browser storage, and a file that was never parsed cannot report any of the three. The rest of the tree analysed normally and its rows above stand; only these files are unaccounted for. You can widen what we reach: fix the syntax error (or exclude the file deliberately) and re-scan to cover it.
AXB1 Runtime evidence locked — no reproducible boot — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Subject: a native UI project (pubspec.yaml). The Runtime Evidence tier boots an app only via docker-compose, an Aspire AppHost, a Dockerfile, an npm dev script, a web service's own toolchain entry point (cargo, go, dotnet, Python, Spring Boot), or an Android app's own Gradle wrapper (run on an emulator); an Apple or Flutter app needs a host it lacks. None applied, so no live runtime a11y/egress/header evidence was collected. You can widen what we reach: add a docker-compose.yml (or an Aspire AppHost) that brings the app up with its dependencies. We then boot it in an isolated sandbox and gathers real runtime evidence — you change nothing in your pipeline (no CI step, no SDK).
P1 CI/CD gates — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. A CI pipeline exists and the word "test" appears, but no explicit test-runner invocation (your stack's test command, or a test job) was matched — so either the gate runs tests through a step this pass could not recognise, or "test" is incidental here (a path, "latest", a reporter). Which of the two it is cannot be settled from this dimension's evidence; the coverage dimensions report whether a suite exists at all. You can widen what we reach: name the test runner explicitly in the pipeline step (your stack's test command, or a job named for the suite) so the gate is unambiguous to a reader and to this pass.
P5 DR & Backup — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. No backup/snapshot/replication config, RTO/RPO or restore-procedure documentation was found — and no production persistence was detected either (no data-access packages, no data-store services, no database resources), so there is nothing in this repository whose loss a DR control would recover. If this system's data lives in a platform or ops repo we can't see, that's where the DR evidence belongs.
X24 Document value interpolated into markup unescaped — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Scala, Ruby and Python source only, and no C# was loaded, and the 1 JavaScript/TypeScript file(s) found looked minified or bundled, which this check does not read, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X3 Exception handling — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. 62 further occurrence(s) are not listed individually; the score already reflects all 102.
Repo exclusion declarations (.gitattributes linguist-generated/vendored, .editorconfig generated_code): none declared — every source file was scored.
Limitations & what we did not check
We assess the repository exactly as committed, and only the repository. By design we do not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.
Per-dimension blind spots
For each dimension that was measured, what a static, repo-only scan structurally cannot see — the honest edge of the measurement, not a failure of it.
D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
D5 Coupling: Coupling is measured between projects/assemblies — runtime coupling through DI, reflection, messaging or shared databases is invisible to a static reference graph.
D6 Cohesion (LCOM4): LCOM4 cohesion is syntactic — it infers connectivity from which methods touch which fields/methods by name, not from real runtime behaviour or intent.
D8 Code Coverage: Coverage is measured by building and running the test suite inside our isolated image — the target repo is never modified, and nothing on your systems runs. So coverage exists only when the suite builds and runs within the inline time budget; one that needs external services, can't build, or exceeds the budget yields no coverage (D8 then degrades to not-measured, not a low score). Line coverage also says nothing about assertion quality.
D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
D14 License Compliance: License compatibility is checked against declared package metadata and a policy — mislabelled or missing license metadata, and obligations that depend on how you distribute, are not resolved here.
D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
D19 Documentation Quality: Documentation quality publishes two things only: a runnable or packaged unit with no example, and a multi-project root README that maps none of its parts. It does not judge clarity, and its other checks (overview, licence, boilerplate, structure, empty sections, XML-doc coverage) are withheld after adjudication: their candidates are counted in the card's gaps, not shown as rows. A false statement in a document is M4's; units are .NET projects only.
D20 ADR Quality: ADR quality checks the structure of the decision records present: it cannot know about decisions made and never recorded, and it does not judge how well a record argues its case. Records in a language the section lexicon does not cover are not evaluated.
D26 Project Cohesion: Project focus is sized from members/namespaces per project — a project that is broad by deliberate design reads the same as one that has sprawled.
D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
D44 Platform End-of-Life: The support table is FROZEN, so it goes out of date by losing RECALL: a release that ended support after the table was written is missed until the table is refreshed, and this dimension reading 10 is not evidence that a platform is current. Only platforms the repository DECLARES in a place this pass reads are seen — a runtime named only in a Dockerfile (D31's subject), in a CI workflow (D29's), or in a file this pass does not parse (go.mod, a Gemfile ruby directive) is invisible here, which is why a repository declaring none of them abstains rather than scoring. Only frameworks with a PUBLISHED support policy are tracked: React, Flask and Express publish none, so their age cannot be judged and their absence from a report is not a statement that they are supported.
AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
AX9 CQS / query purity: Handlers are found by interface/name convention — a query handler using neither is not seen. Mutation is a resolved write/publish invocation (SaveChanges/repository/bus), so a write hidden behind a hand-rolled wrapper, reflection, or a string-keyed service locator resolves to a non-persistence type and isn't flagged; it detects that a query writes state, not whether the write is a legitimate read-side cache update. Clean means "no resolved write/publish in a query body", not a proof of CQS purity.
P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".
P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.
What it measures: How tangled the control flow is — methods with many branches are hard to test and change.
Method: Cyclomatic complexity per method (1 + decision points), computed exhaustively across production source; test projects separated by convention. Deterministic.
47 method(s) exceeded the cyclomatic complexity threshold of 15; the worst was _SettingsState.build at 241. A further 2 method(s) were over the threshold but excluded as flat dispatchers (a long switch/match over independent cases: many branches, almost no nesting), the largest being _SourceControlState._handleGitMenuAction at 22 — they are counted neither in the figure above nor in this dimension's score.
+ 42 more group(s) — more in Appendix A; the complete list is findings.md.
What to do
Bring the 2 bodies over 120 down to 120 or less in Cyclomatic Complexity — start with _SettingsState.build (cyclomatic 241), _EditorPageState.build (cyclomatic 208). — This score is capped by its worst body, so a finding fixed alone moves it by almost nothing — the next one down takes its place. Refactoring these 2 together lifts Cyclomatic Complexity from 2.4 to about 3.8/10, projected with the scoring formula itself and assuming each lands exactly at 120; a cleaner split scores higher.
Detailed fixes: d1_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: How hard the code is for a person to follow, beyond raw branching.
Method: Cognitive complexity per method (Sonar-style nesting-penalized score), computed exhaustively over production code, excluding test projects. Deterministic.
+ 81 more group(s) — more in Appendix A; the complete list is findings.md.
What to do
Bring the 36 bodies over 30 down to 30 or less in Cognitive Complexity — start with _SettingsState.build (cognitive 459), CopilotChat.chatWithModel (cognitive 391), _EditorPageState.build (cognitive 246). — This score is capped by its worst body, so a finding fixed alone moves it by almost nothing — the next one down takes its place. Refactoring these 36 together lifts Cognitive Complexity from 2.0 to about 5.6/10, projected with the scoring formula itself and assuming each lands exactly at 30; a cleaner split scores higher.
Detailed fixes: d2_recommendation.md · top locations in Appendix A, every location in findings.md.
Do you agree with this assessment?
D3 · God Classes7.9 / 10Strong✓ Tool-verified
What it measures: Over-large classes that try to do too much ("god classes").
Method: God-class detection by line and method-count thresholds per logical type (partial classes unified), filtered for generated code and registration/contract false positives. Deterministic.
Resolve the 49 MethodTooLong finding(s) in God Classes — start with widgets.dart (27), settings.dart (6), github_page.dart (3). — One of this dimension's main actionable groups (49 warning-level).
Resolve the 19 FileTooLong finding(s) in God Classes — start with widgets.dart, settings.dart, functions.dart. — One of this dimension's main actionable groups (19 warning-level).
Resolve the 18 ClassTooLong finding(s) in God Classes — start with widgets.dart (5), settings.dart, REDACTED. — One of this dimension's main actionable groups (18 warning-level).
Detailed fixes: d3_recommendation.md · top locations in Appendix A, every location in findings.md.
Do you agree with this assessment?
D4 · Code Duplication3.1 / 10Weak✓ Tool-verified
What it measures: How much of the production code is copy-pasted: the share of production lines inside a reported copy (every copy of a duplicated block or of an edited member, each line once), 10 at none and 0 at a quarter of the lines.
Method: Code duplication via token-stream sliding windows with type-aware normalization (locals masked, type names preserved), scored on the share of production lines inside a reported copy (each line once; 10 at none, 0 at a quarter). Deterministic.
195 duplicated block group(s) detected. 17.3 % of the production lines (8,334 of 48,068) are in a reported copy. A further 44 rows report members as variants of one another; the share counts each copied line once, however many rows cite it.
+ 130 more group(s) — more in Appendix A; the complete list is findings.md.
What to do
Resolve the 8 Duplicated block (11 lines × 2) finding(s) in Code Duplication — start with widgets.dart (4), settings.dart (2), downloads.dart. — One of this dimension's main actionable groups (8 warning-level).
Resolve the 8 Duplicated block (9 lines × 2) finding(s) in Code Duplication — start with widgets.dart (3), downloads.dart (2), REDACTED. — One of this dimension's main actionable groups (8 warning-level).
Resolve the 7 Duplicated block (13 lines × 2) finding(s) in Code Duplication — start with settings.dart (2), github_page.dart, home.dart. — One of this dimension's main actionable groups (7 warning-level).
Detailed fixes: d4_recommendation.md · top locations in Appendix A, every location in findings.md.
Do you agree with this assessment?
D5 · Coupling9.7 / 10Stronggated by 1 serious finding✓ Tool-verified
What it measures: Whether volatile projects sit underneath others that depend on them (so their churn ripples upward), and whether project dependencies form cycles. A widely-depended-on but stable shared/kernel project is healthy, not penalised.
Method: Dependency cycles via elementary-DFS over real .csproj references, plus Martin instability (afferent/efferent) per project. Exhaustive over the reference graph, deterministic.
Coverage: Exhaustive · type-level: afferent/efferent coupling + cycles computed over every production type — the population is all types, not a name convention.
23 production modules (Gradle+pub), 0 dependency cycle(s), 0 unstable depended-on module(s). Read from the build's own module declarations; edges a convention plugin adds from buildSrc or build-logic are not visible there; 1 module(s) off the main sequence, with abstractness counted on 2 of the 23 (the rest declare no modelled class or interface, export only macros, declare types in source no model reads, or have no source directory of their own).
Off the main sequence: :app
What to do
Resolve the 1 Off the main sequence finding(s) in Coupling. — One of this dimension's main actionable groups (1 warning-level).
Detailed fixes: d5_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: Whether a class's methods are focused on a single responsibility.
Method: LCOM4 cohesion per production class with at least two methods: connected components of methods sharing state or calls, computed syntactically. Deterministic, not a proxy.
Coverage: Exhaustive · type-level: LCOM4 cohesion computed over every production class — the population is all types, not a name convention.
Resolve the 5 Low cohesion finding(s) in Cohesion (LCOM4) — start with ai.dart (3), ui_bloc.dart, widgets.dart. — One of this dimension's main actionable groups (5 warning-level).
Detailed fixes: d6_recommendation.md · top locations in Appendix A, every location in findings.md.
Do you agree with this assessment?
D8 · Code Coverage0.0 / 10Critical✓ Tool-verified
What it measures: How much of the code is actually exercised by tests.
Method: Coverage from the analyzer's own run of the suite, computed per-file with structured exclusions for generated, trivial, and glue code. A coverage report found in the repository is never read. When the suite can't be built/run in-image, coverage is reported NOT-MEASURED (excluded from the score) with the precondition to make it measurable — never a LoC-ratio proxy folded in as if measured. Deterministic.
What it measures: Whether any secrets (keys, tokens, passwords) have leaked into the code.
Method: In-process native secret scanner (entropy plus signature patterns) across all tracked files; no external tool. A clean result is a measured 10, not no-data zero. Deterministic.
What it measures: Whether the licenses of third-party packages are compatible with your policy.
Method: Third-party package licenses resolved from declared package metadata and checked against the configured policy (allow/deny/copyleft). Deterministic; clean = no incompatible license found at metadata depth.
0 of 193 resolved pub package(s) use a banned license. Licences were read from pub.dev's analysis of each package's licence file, over every package this repository's pubspec.lock resolves from pub.dev, direct and transitive, at the locked version; the 1 package(s) the lock marks direct dev are excluded, and SDK, path and git packages have no registry release to read. pub.dev analyses only recent releases, so for 21 package(s) locked at an older version the licence read is that of the package's latest analysed release, not of the locked one. 1 of them carry no licence pub.dev recognises; that is missing data, not a violation, and none of them is charged. ★ COVERAGE OF THIS VERDICT: it grades this repository's pub package dependencies and nothing else. The repository also declares a Gradle build (build.gradle/build.gradle.kts), and the licences of those dependencies were NOT read by this pass — a gap in this engine's coverage, not a statement about them. So this result says the graded closure carries no banned licence; it does NOT say this repository's licensing is clear.
What it measures: Files that change often and are also complex — the riskiest hotspots.
Method: Per production file churn times cyclomatic complexity over a rolling window, computed from git and Roslyn/JS/Razor analysis. Exhaustive, deterministic per commit date.
Top hotspots: REDACTED (8×208=1664); lib/ui/settings.dart (4×241=964); lib/ui/home.dart (2×78=156) Repeated repair below the complexity floor: lib/main.dart (3 of 4 changes were fixes)
Hotspot: REDACTED · ×5REDACTED:1651
Repeated repair: lib/main.dartlib/main.dart:89
What to do
Resolve the 5 Hotspot finding(s) in Churn × Complexity Hotspots — start with REDACTED, settings.dart, home.dart. — One of this dimension's main actionable groups (5 warning-level).
Resolve the 1 Repeated repair finding(s) in Churn × Complexity Hotspots — start with main.dart. — One of this dimension's main actionable groups (1 warning-level).
Detailed fixes: d15_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: Acknowledged debt left in the code — TODOs, dead code, suppressed warnings.
Method: Roslyn syntactic debt markers (suppressions/TODO/FIXME/HACK/empty-catch/commented-code/Obsolete) plus SymbolFinder dead-code analysis; weighted-debt-per-KLoC density deducted 2.0x per unit. Deterministic, exhaustive.
1 deducted task-comment markers across 48068 LoC (0.0/KLoC) → score 10.0. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.
TodoCommentREDACTED:3226
What to do
Resolve the 1 TodoComment finding(s) in Explicit Debt — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).
Detailed fixes: d17_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: Whether the project's documentation is clear, complete, and useful.
Method: Every README, docs/ document and root guide parsed by its markup and measured in Unicode letters. Published: a runnable or packaged .NET project whose README (or a document it links, or a root guide) shows no example, and a root README naming none of three or more projects. Overview, licence, boilerplate, wall-of-text, empty-section and XML-doc rows are measured and withheld (counted in gaps) after adjudication. Deterministic, exhaustive, advisory.
1 of 1 documentation facets pass in full. 3 document(s) read across 1 unit(s).
✓ On the Gold path — maintain.
Detailed fixes: d19_recommendation.md.
Do you agree with this assessment?
D20 · ADR Quality0.0 / 10Critical✓ Tool-verified
What it measures: Whether architecture decisions are recorded well (context, decision, consequences).
Method: Every ADR read by its section structure: nine located rules (a missing Decision, Context or Consequences section, a stale status, two records deciding the same question, a dangling supersede link, a number-only title, a single option, no named cost, no status where the log uses one, no enforcement field where the log adopted one), each a fixed deduction from 10; the score is the mean over evaluated records. Deterministic, no model. Advisory.
Resolve the 1 No ADRs found finding(s) in ADR Quality — start with main.dart. — One of this dimension's main actionable groups (1 recommendation-level).
Detailed fixes: d20_recommendation.md · top locations in Appendix A, every location in findings.md.
1 of 2 build units (Gradle, pub) flagged as possibly oversized/incoherent.
Projects may be oversized for their cohesionpubspec.yaml:1
What to do
Resolve the 1 Projects may be oversized for their cohesion finding(s) in Project Cohesion — start with pubspec.yaml. — One of this dimension's main actionable groups (1 recommendation-level).
Detailed fixes: d26_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: Whether any secrets were ever committed — scanned across the full git history, not just now.
Method: Secret scan via TWO gitleaks detect passes in an isolated checkout — the full git history, then a second --no-git pass over the working tree as it stands — merged and de-duplicated by (rule, file, line); each match flagged High. Both invocations are recorded in the audit trail. Exhaustive; when the tool is absent, or when its output cannot be parsed into the expected shape, the dimension is WITHHELD as an explicit measurement gap on our side — unscored and excluded from the lens, never a hedged middling score.
What it measures: Real static-analysis (SAST) findings — likely security bugs in the code, any language.
Method: Polyglot static analysis via semgrep across the repo using the pinned, image-baked p/security-audit + p/owasp-top-ten rulesets (no scan-time registry fetch); severity rules (ERROR/WARNING/INFO) map to a full-band severity-weighted score. Exhaustive, deterministic; degrades on parse failure.
Coverage: semgrep pattern rules over all files — exhaustive for the rule set, blind to classes of bug without a rule (clean = no rule matched).
9 finding(s): 0 critical, 6 high, 2 medium, 1 low. 5 unpinned-GitHub-Actions row(s) are reported here but scored by D36 (supply-chain provenance), which measures that posture as `pinned_actions` — one pinning decision is charged once, not once per lens. semgrep hit a parse error in 2 file(s) — `android/gradlew` (lines 140–141, line 142, line 143, …), `assets/webview/eruda.js` — so no absence of findings in the named regions is evidence of anything; rows reported elsewhere in those files are real. Fix the syntax error (or exclude the file deliberately) and re-scan to cover them.
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
What to do
Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).
No action in Static Analysis (SAST) — all 5 REDACTED finding(s) are reported here at file:line but scored by D36 (supply-chain provenance), so none is charged to this dimension. — One of this dimension's main actionable groups (5 issue-level, 0 of them charged here).
Detailed fixes: d29_recommendation.md · top locations in Appendix A, every location in findings.md.
What it measures: Whether any dependency has a known published vulnerability (CVE), direct or transitive, in ANY ecosystem the repository declares — Dart pub, Elixir and Erlang via Hex, Go modules, Java and Kotlin via Maven/Gradle, JavaScript/npm, .NET/NuGet, PHP/Composer, Python/PyPI, RubyGems, Rust/Cargo and Swift.
Method: Dependency-CVE scan across every ecosystem the repository declares, scored ONCE. Three sources are unioned and deduplicated by advisory identity (rule id + alias closure, CVE<->GHSA) scoped to package+version, keeping the worst severity: `osv-scanner --recursive` over osv.dev for Dart pub, Elixir/Hex (and Erlang, whose `rebar.lock` syft first converts to a CycloneDX SBOM the scanner reads, with rows attributed back to the lock), Go, Java and Kotlin via Maven/Gradle (and Scala, whose sbt build's pinned direct declarations are written into a CycloneDX SBOM the scanner reads, with rows attributed back to the build file), npm, PHP/Composer, Python/PyPI, RubyGems, Rust/Cargo and Swift; `trivy fs --scanners vuln` for npm lockfiles; and `dotnet list package --vulnerable --include-transitive` for NuGet (with per-advisory collapse of the project x target-framework fan-out), plus a DECLARED-dependency arm that resolves a published gem's gemspec against rubygems.org where no Gemfile.lock is committed. `SeverityScore(c,h,m,l, normalizer 8.0)`. NotApplicable only when NO ecosystem is readable; if any applicable ecosystem could not be scanned the findings are REPORTED and the score is withheld. Supersedes the npm and OSV arms, retired 2026-09-05. Advisory since rubric-2026.11.2 (CAI decision 0006): every row is a match against a vulnerability database that changes daily, so the reading is shown and never moves a scored dimension, lens or the headline.
What it measures: Whether anyone still has living knowledge of each file, or it has been orphaned — last understood long ago by someone now gone quiet. The sibling of the bus factor: D16 asks who owns it, D34 asks whether anyone still knows it.
Method: File orphaning as total living-knowledge decay below one focused-commit's worth within a year, computed per-file from the D16 decay model. Exhaustive, deterministic over fixed history.
Every significant source file has living knowledge — recently and meaningfully worked. Counted over 37 of the 60 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.
What it measures: Whether files that change together actually belong together — pairs that repeatedly co-change in git history despite having no explicit code dependency, surfacing the hidden/logical coupling (and boundaries in the wrong place) a static scan can't see.
Method: Pairwise co-occurrence over the per-commit file sets in git history (production source only — tests and generated dropped): Degree-of-Coupling = shared ÷ min individual revisions, reported above noise floors (each file ≥10 revisions, ≥5 shared commits, ≥50% strength); sweeping commits excluded. Deterministic over fixed history.
Coverage: Population: PRODUCTION source files only — test and generated files are dropped before pairing, so a class co-changing with its own test (trivially ~100%) can't drown the real production↔production coupling. Pairs ranked by Degree-of-Coupling. A non-source file is never a coupling PARTICIPANT either: documentation, schemas, config and data files are dropped with the rest, so a code↔docs pair — a command and the reference page that restates it — is not reported however strongly the two co-change; nor is coupling that runs THROUGH a build step or config file.
What it measures: Whether the build pipeline provides supply-chain integrity — generated provenance/attestation, signed artifacts (cosign/sigstore), an SBOM, and pinned build actions. Presence of the configuration, not a runtime guarantee.
Method: Supply-chain provenance/signing read deterministically from CI/build config (.github/workflows, .gitlab-ci.yml, azure-pipelines, Jenkinsfile, .circleci) + the release surface: four signals — generated provenance/attestation (SLSA/in-toto/actions-attest), artifact signing (cosign/sigstore/gitsign), an SBOM (syft/sbom-action/*.spdx.json/*.cdx.json), and SHA-pinned build actions — scored 10·present/denom. NotApplicable without a build pipeline. Detects configuration presence, not runtime enforcement.
What it measures: Whether any dependency the repository declares is published as MALICIOUS rather than merely vulnerable — a package that is an attacker's work, in any ecosystem osv-scanner reads. Reported apart from D30 because the answer is binary: there is no safe version to upgrade to, and the fix is to remove the package and rotate every credential it could have read.
Method: The same dependency scan D30 reads, partitioned on the scanner's own classification rather than rescanned: a row is MALICIOUS when its id is in the `MAL-` space (the ossf/malicious-packages feed) OR its `database_specific.cwe_ids` carries `CWE-506` ("Embedded Malicious Code"). Both channels are structural; the summary text is deliberately NOT read, because a malicious-package record whose summary says only "Critical severity vulnerability" is a real shape ([GHSA redacted]) and a text matcher misses it. Scored BINARY: any surviving row is 0, whatever its severity and however many CVEs sit beside it — a hostile dependency is not a quantity. Applicability and degradation are D30's: NotApplicable only when no ecosystem is readable, and an unscannable ecosystem degrades rather than reading clean. Advisory since rubric-2026.11.2 (CAI decision 0006): the malicious-package feed is a database that changes daily, so the reading is shown and never moves a scored dimension, lens or the headline.
What it measures: Whether anyone still ships security patches for the platform this repository RUNS ON — the runtime it pins and the framework majors its own constraints hold it to. Separate from D12 because the question differs: a current Django on an end-of-life Python is perfectly up to date and completely unsupported, and the fix is a migration rather than a version bump. What the repository says it merely SUPPORTS is never charged.
Method: End-of-life PLATFORM read from the repository's own declarations and graded against a FROZEN, dated table of vendor support dates — no network, no feed, no API, so this dimension answers identically inside a closed scan fence. Two subjects: a RUNTIME the project pins (a single or all-end-of-life TargetFramework, a .nvmrc or .python-version, a requires-python CAP) and a FRAMEWORK major a dependency constraint cannot move off (a caret, tilde or exact version; `vue@^2.7.16` pins Vue 2). A FLOOR is deliberately never charged — `requires-python = ">=3.8"` states what a package SUPPORTS, not what it runs on — and a multi-target project is charged only when EVERY target is out of support. Runtime 4.0/product capped 8.0, framework 1.5 capped 4.5. The table is safe to freeze because a statement about support that ended in the past cannot become false: it loses recall as it ages, never precision, and a test asserts every entry predates the freeze date. Disjoint from D31 (a container image's OS layer) and D29 (the toolchain a CI workflow installs). Abstains when the repository declares no platform this pass reads — never scores it clean.
0 end-of-life runtime(s) and 0 end-of-life framework(s), read from 22 platform declaration(s) and 22 dependency declaration(s). This dimension reads what the repository says about ITSELF — a pinned target framework, a version file, a capped requires-python, a Rust toolchain pin, a framework major a constraint cannot move off. A FLOOR is deliberately never charged: `requires-python = ">=3.8"` states what the package SUPPORTS, not what it runs on, and a well-maintained library declares exactly that while running its own CI on a current release. The end-of-life facts are FROZEN and dated, so this dimension needs no network and answers identically inside a closed scan fence; as the table ages it loses recall and never precision, because a statement about support that ended in the past cannot become false. The OS layer of a container image is D31's question and the toolchain a CI workflow installs is D29's; this row is neither.
Other · Architecture — Whether any singleton service captures a scoped/transient dependency — a silent lifetime/threading bug.
Method: Roslyn scan: DI registrations parsed from AddSingleton/Scoped/Transient; each singleton checked for captured shorter-lifetime dependencies. Exhaustive, deterministic.
Other · Architecture — How the codebase splits by code ROLE — domain, application, infrastructure, test, generated. The significance map behind the knowledge/coupling weighting, and a DDD signal in its own right: a thin domain core under fat infrastructure is the anemic-domain smell, quantified. How each file's role is decided, because the split is only as good as that: a generated name or a build-output tree makes it Generated, a test project makes it Test, and otherwise the file's NAMESPACE and PATH words are matched against fixed vocabularies in a fixed ORDER — domain, then infrastructure, then application — so a file whose words hit two layers is counted under the earlier one. A production file matching none of them counts as application, so that share reads 'application or unclassified' rather than a measured application layer. Roles come from naming convention, never from what the code does. On this repository the split was taken from the source tree on disk rather than from a loaded .NET workspace, so a file's role is decided by its PATH segments alone — no declared namespace was available to add to the evidence — and generated output is excluded from the census entirely rather than counted as a generated share.
Method: Roslyn line-count by code ROLE: every source file classified Domain/Application/Infrastructure/Test/Generated by namespace + path convention (the shared CodeRoleClassifier), then significant lines summed per role. Deterministic; the advisory score is the business-logic (domain+application) share of production code.
Coverage: Population: ALL source files, each bucketed into ONE of five roles (Domain/Application/Infrastructure/Test/Generated) by namespace + path convention — a file whose layer isn't named in the convention falls to Application (the neutral default), and the split is line-count, not semantic depth or business value.
Other · Architecture — Whether the project-reference graph is acyclic (cycles block independent build/deploy and signal eroding boundaries).
Method: Project reference cycles via elementary-DFS over real .csproj references, using the engine shared with D5/D7; cyclic versus acyclic. Exhaustive, deterministic.
Other · Architecture — Whether dependencies point inward (Domain ← Application ← Infrastructure/Web) — the clean-architecture dependency rule, checked across the project graph.
Method: Layer violations by name-segment inference (Domain/Core to Application to Infrastructure/Web) over the project-reference graph. Exhaustive over all projects, deterministic.
Other · Architecture — Whether interfaces stay focused rather than fat — the Interface-Segregation principle (SOLID 'I').
Method: Roslyn scan: public interface declared-member counts (accessors fold into their property/event); fat-interface threshold (over 15 declared members) flagged per type. Each finding also reports the distinct-OPERATION count — members counted by name, so an overload group counts once — which decides whether it states the caller-side ISP harm or the implementer-side burden of an overload set. TypeScript: exported interfaces that declare behaviour, counted over their REQUIRED operations (method signatures and function-typed properties with no `?`, once per signature) — data-shape interfaces and ambient .d.ts declarations are outside the population; JavaScript declares no interfaces and is not applicable. Deterministic, type-level.
`AppLocalizations` declares 126 abstract methods: `appTitle`, `aboutRoxum`, `aboutDeveloper`, `getInTouch`, `versionLabel`, `aboutDescription`, `developerIntro`, `start`, `settings`, `contributeSourceCode`, `buyMeACoffee`, `privacyPolicy`, `fileManager`, `runtimes`, `appTheme`, `github`, `builtInTerminal`, `openFile`, `openFolder`, `openRepository`, `openTemplate`, `projects`, `recent`, `noRecentActivity`, `projectNotFound`, `fileNotFound`, `newFileTitle`, `newProject`, `projectTemplates`, `yourProjects`, `createNewFile`, `createNewProject`, `openExistingProject`, `enterRepositoryUrl`, `creatingProject`, `cloningRepository`, `cloningMayTakeTime`, `failedToOpenFile`, `selectedFileCouldNotBeOpened`, `failedToOpenFolder`, and 86 more. Counted over its public methods with no body, once per name; concrete methods and `_`-private members are not counted, because no implementer that extends it is forced to write them. A wide interface forces every implementer and caller to depend on methods they don't use (the Interface-Segregation 'I' in SOLID). Split it into focused role-interfaces. — lib/l10n/app_localizations.dart:16
What to do
Split fat interfaces into focused role-interfaces so clients depend only on what they use.
Other · Architecture — Whether read (query) handlers stay side-effect-free — a query that writes persistent state or raises events breaks CQS and makes reads unsafe to retry, cache, or route to a read replica.
Method: Roslyn scan: CQRS handlers classified query-vs-command by interface (IQueryHandler/ICommandHandler/IRequestHandler<TQuery,TResult>) and name convention (*Query/Get*/Find* vs *Command); each query handler's body checked for persistent-state writes (SaveChanges/repository Add-Update) or event publishes by resolved invocation. Deterministic, type-level, exhaustive over the detected handlers.
Coverage: Population: CQRS handlers identified by IQueryHandler/ICommandHandler/IRequestHandler interface + *Query/Get*/Find*/*Command NAME convention; query purity then checked exhaustively within that set — a query handler using neither convention is invisible, and mutation is a resolved persistence/publish CALL, not full dataflow.
Other · Security — Whether access is authorized by default — a framework authorization attribute/decorator or policy, or imperative guard methods (throw-on-violation) called from handlers.
Method: Roslyn scan: [Authorize] usage and authorization policies, plus imperative throw-on-violation guard methods detected via syntax. Deterministic.
This repository serves requests — an HTTP server (HttpServer.bind) (lib/ui/webview.dart:34) — and no route guard, auth-gate middleware, global guard or imperative check that refuses a caller (401/403, an Unauthorized/Forbidden error) was found: its endpoints may be unprotected. — lib/ui/webview.dart:34
What to do
Protect endpoints by default-deny: a global authentication guard or middleware with explicit public opt-outs, or a guard on every route, plus named role/permission rules for what an authenticated caller may do.
Other · Code Health — Unreviewed-generation residue in this repository's Dart: methods whose whole body still throws UnimplementedError or a "not implemented" error, and placeholder text (lorem ipsum, changeme/replace_me…) left in strings of non-test, non-generated code. Scored as a quality signature, never as a claim about authorship.
Method: Roslyn syntax scan: NotImplementedException throws and placeholder string literals in non-test, non-generated shipped code. Deterministic, code-shape signature.
Other · Code Health — Unfinished work detected by code SHAPE, not keywords, in this repository's Dart: methods that only throw UnimplementedError or a "not implemented" exception, methods that take inputs and return a constant or do nothing, dead `if (false)` branches, and skeleton classes most of whose methods are holes.
Method: Roslyn syntax scan: incompleteness by code shape (constant-returning methods, async-never-await, #if false branches, guards that return what the code already falls through to, tests an earlier guard already decided, comparisons against NaN, skeleton types), not keyword-gated. Deterministic, code-shape heuristic.
Maturity · Maturity — Whether the repository and its projects have a README, and whether it is substantive.
Method: Filesystem scan: README presence, word count, and headings for depth; git history for staleness. Exhaustive across root and project dirs, deterministic.
What to do
Explain in the README how to run the tests. Add a section called Testing to the README in the repository's top folder, saying how to run the test suite.
Maturity · Maturity — Whether key decisions (ADRs) and the high-level shape (C4/diagrams) are written down.
Method: Filesystem scan: ADR folder/naming conventions or content, plus Mermaid/PlantUML/C4/architecture.md discovery. Exhaustive, deterministic.
No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.
What to do
Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
Add a C4 context/container diagram (Structurizr, PlantUML or Mermaid) or an architecture.md overview.
Maturity · Maturity — Whether the repository is organised deliberately: production code and tests are set apart in a way its ecosystem or the repository itself declares.
Method: Filesystem scan: src/test folder separation and namespace-prefix consistency (majority RootNamespace agreement). Exhaustive across projects, deterministic.
Do you agree with this assessment?
P1 · CI/CD gates8.5 / 10Strong✓ Tool-verified
Readiness · Readiness — Whether an automated pipeline builds and tests every change.
Method: Filesystem scan: CI workflow files (.github/workflows, .gitlab-ci.yml, etc.) for build and test stages. Exhaustive, deterministic.
What to do
Run the test suite in CI via an explicit runner step (`./gradlew test` for the toolchain this pipeline already uses) and gate merges on it.
Do you agree with this assessment?
P2 · Observability5.5 / 10Adequate✓ Tool-verified
Readiness · Readiness — Whether the code is diagnosable in production — structured logging, tracing/metrics, health checks.
Readiness · Readiness — Whether SAST, secret/dependency scanning and performance benchmarking are wired in (presence, not runtime).
Method: Filesystem scan: SAST configuration, dependency-update automation, secret scanning, and a benchmark harness or benchmark step — in this repository's own ecosystem. Exhaustive, deterministic.
No static application security testing detected. For this repository's stack, add the Dart analyzer's security lints plus `semgrep --config=auto` as a CI step. What was searched, so you can tell an absence from a miss: the 1 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner.
`android/app/build.gradle.kts` declares packages, and nothing in the repository keeps them current: no Dependabot or Renovate configuration that schedules updates, and no dependency-review gate on pull requests. A pinned dependency stays at the version it was added at until someone notices — including after an advisory is published against it. Add a `.github/dependabot.yml` with one `package-ecosystem` entry per ecosystem the tree uses (or an enabled `renovate.json`), and gate pull requests with `actions/dependency-review-action`. — android/app/build.gradle.kts:147
What to do
Add a SAST step to CI running what this repository's stack ships: the Dart analyzer's security lints plus `semgrep --config=auto` — so a security regression fails the build instead of landing.
Enable Dependabot/Renovate or a dependency-review gate.
Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
Readiness · Readiness — Whether releases are automated and safely reversible (probes, rolling updates, approval gates) — from manifests/pipeline files, not the live environment.
Method: Filesystem scan: deployment manifests/IaC (K8s YAML, Helm, Terraform) for rolling updates, probes, approval gates, migration hooks. Exhaustive, deterministic.
The release is automated and no gate that pauses it for a human is DECLARED IN THIS REPOSITORY'S PIPELINE FILES. What was read: every file under `.github/workflows/`, `.forgejo/workflows/`, `.gitea/workflows/`, `.azuredevops/` and `.azure-pipelines/`, plus `.gitlab-ci*` and `azure-pipelines*` — with comment text stripped, so documenting a gate is not declaring one. What would have counted: GitLab's `when: manual`, CircleCI's `type: approval`, an Azure `ManualValidation@` task or an `approvals:` block, a Jenkins `input` step, a `uses:` step naming an approval action, an `environment:` paired with `reviewers` / `required_reviewers` / `protection` / `wait-timer` / `deployment_branch_policy`, a draft-release step, a `workflow_dispatch` promotion, or a release-event gate. ★ What this cannot see, because none of it is a file: a GitHub environment whose required reviewers are configured in repo SETTINGS, a branch protection rule, or an organisation deployment policy — all of them real, enforced gates that live outside the repository. If yours is one of those, this row is wrong and nothing in the tree could have told us. Otherwise: whatever the release trigger points at is published to users unreviewed, so a mistagged or unverified commit ships and the only remedy is a follow-up release. — REDACTED:181
What to do
Nothing pauses a release for a human: publish as a draft release (or gate the release job on a protected tag/manual dispatch) so a bad build can be stopped before users can download it.
Readiness · Performance — Whether asynchronous code stays responsive — it avoids sync-over-async blocking (a .NET .Wait()/.GetAwaiter().GetResult(), a time.sleep or blocking HTTP call inside a Python coroutine, a *Sync call inside an async JavaScript function, block_on inside a Rust async fn, runBlocking inside a Kotlin suspend function, block() inside a Reactor publisher) that stalls a thread or event loop and risks deadlock, and, where the code is a reusable library on .NET, awaits with ConfigureAwait(false) so it never captures and stalls its caller's context.
Method: Production-source scan: sync-over-async blocking counted everywhere — .Wait()/.GetAwaiter().GetResult() in .NET; off .NET, read from each language's code model, a blocking call inside an async function (Python, TS/JS, Rust, Kotlin, Swift, Dart) or inside a Java method returning a Reactor Mono/Flux or a Scala method returning a Future or effect — and, for a .NET library with ≥5 awaits, the share of awaits using ConfigureAwait(false). Deterministic, syntax/text detection.
`startDownload` is async and calls createSync — a blocking call inside async code stalls the isolate's event loop — every other event, on Flutter the next frame, waits for as long as it runs. — lib/bloc/ui_bloc/ui_bloc.dart:1493
`_initializeApp` is async and calls listSync, createSync, writeAsBytesSync — a blocking call inside async code stalls the isolate's event loop — every other event, on Flutter the next frame, waits for as long as it runs. — lib/ui/start_screen.dart:90
`_loadInstalledCatalog` is async and calls listSync — a blocking call inside async code stalls the isolate's event loop — every other event, on Flutter the next frame, waits for as long as it runs. — lib/utils/package_catalog.dart:382
`generateContent` is async and calls createSync — a blocking call inside async code stalls the isolate's event loop — every other event, on Flutter the next frame, waits for as long as it runs. — lib/utils/proj_temps.dart:36
What to do
Dart: await the async dart:io API (readAsString, writeAsString, Process.run, Future.delayed) instead of the *Sync variant or sleep(), or move heavy synchronous work to another isolate with Isolate.run.
Other · Security — Read from this repository's Dart source: cryptographic hygiene (weak hash or cipher, key material fixed in the source) and outbound TLS certificate validation — facts about code that hold whether or not it serves anything itself. The TLS protocol version is not read: `dart:io` leaves the protocol floor to the platform's TLS library and has no switch that admits an obsolete version. This repository serves HTTP itself (lib/utils/functions.dart:1604 — `HttpServer.bind(`), so its Dart source was also read for the server controls: TLS served or HSTS set, security response headers, cookie flags and inbound validation — each credited where its Dart spelling appears in production source, not proven on every route.
Method: Roslyn plus filesystem scan: HSTS/security headers, secure cookies, input validation, middleware order, weak crypto (MD5/SHA1/DES); HTTPS-metadata context-aware. On a repository with no .NET source it reads JavaScript/TypeScript, Dart, Ruby, Scala, Rust or Elixir source itself (test, vendored, generated and minified paths not) for the arms that hold whether or not the code serves HTTP: a weak hash or cipher, key material fixed in the source, a TLS client that accepts any certificate, and (JavaScript/TypeScript, Ruby, Scala, Rust and Elixir) an obsolete TLS version; the server controls are not assessed there, and a Dart, Ruby, Scala, Rust or Elixir repository that serves no HTTP of its own is N/A on them. Deterministic.
This repository runs an HTTP server that is not bound to the loopback interface alone — or binds it at an address its source does not spell out — and nothing in its Dart source secures the transport: no `HttpServer.bindSecure` or `securityContext:`, no `Strict-Transport-Security` header, no `X-Forwarded-Proto` read from a TLS-terminating proxy — so its traffic may cross the network in clear text. (−2.0 on this card.) The server: lib/utils/functions.dart:1604 — `HttpServer.bind(`.
None of the 11 security response headers the OWASP Secure Headers Project recommends (Content-Security-Policy, Strict-Transport-Security, X-Content-Type-Options, X-Frame-Options, …) is set on a response this repository's Dart server sends — defense in depth, even when a proxy could set them. (−2.0 on this card.) The server: lib/utils/functions.dart:1604 — `HttpServer.bind(`.
What to do
Secure the server's transport: serve TLS itself (`HttpServer.bindSecure(…, context)`, or `shelf_io.serve(…, securityContext: context)`), or run it behind a TLS-terminating proxy and check `X-Forwarded-Proto`; send `Strict-Transport-Security` once it is HTTPS-only. A server only this device needs to reach should bind `InternetAddress.loopbackIPv4` instead.
Set security response headers on what the server sends — `response.headers.set('X-Content-Type-Options', 'nosniff')` in a `dart:io` handler, or a shelf middleware that adds `Content-Security-Policy`, `X-Content-Type-Options` and a frame policy to every `Response`.
Other · Code Health — Whether the code avoids sync-over-async (deadlock-prone blocking on tasks) and async void.
Method: Roslyn syntax scan: async methods scanned for .Wait()/.GetAwaiter().GetResult() and async-void outside event handlers. Deterministic, hard fact per invocation.
Other · Code Health — Whether any branch is dead by construction — a switch arm whose label can never equal a case-normalised subject, or an `else if` whose predicate the arm above has already swallowed.
Method: Roslyn syntax + semantics: switch labels compared against the subject's own case normaliser, and if/else-if chains checked for a literal an earlier arm's containment test already swallows. Deterministic, provable per finding. Advisory.
Do you agree with this assessment?
X13 · Undrained process stream4.8 / 10Weak✓ Tool-verified
Other · Code Health — Whether a child process that has BOTH standard streams redirected drains both — reading one to the end while the other is never read deadlocks once the child fills the unread pipe.
Method: Roslyn syntax + semantics: ProcessStartInfo launches with both streams redirected, checked for a drain of each stream across the enclosing type. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `spawn` imported from `child_process` whose stdout and stderr are both pipes (no options, no `stdio`, or `stdio` of `'pipe'`), bound to a local that never leaves its scope, where exactly one of the two streams is read, the other never, and the child’s `close`/`exit` (or the read stream’s end) is awaited; a shell redirect in the call’s arguments or a `kill` of the child suppresses it. The same rule reads Python’s `subprocess.Popen`, Dart’s `Process.start`, Ruby’s `Open3.popen3`, and Scala’s JDK process starts (`new ProcessBuilder(…).start()` with no `redirectErrorStream`/`redirectError`/`redirectOutput`/`inheritIO`, `Runtime.getRuntime.exec`) where one of `getInputStream`/`getErrorStream` is read and the other never while `waitFor()` is called or the read stream is read to its end. Deterministic, provable per finding. Advisory.
`Process.start` always pipes both `stdout` and `stderr`, and here `process.stderr` is read while the child's end is awaited — but nothing in this scope ever reads `process.stdout`. Dart reads a process stream only while something listens to it, and the API's own documentation says every byte of both must be read: once the child writes more than the pipe holds to stdout (measured with Dart 3.12 on Linux: 60 KB hangs every time, and less on a box short of pipe pages), it blocks on the write, never exits, and the `exitCode` or end of stream this code awaits never comes. Nothing fails loudly: the future never completes and the stuck child holds its resources until something kills it. Consume both streams (`process.stdout.drain<void>()` to discard it, or listen to it), use `Process.run`, which collects both, or start it with `mode: ProcessStartMode.inheritStdio` when the output is not wanted. — lib/utils/functions.dart:351
What to do
Each finding names the span that makes the branch dead and the span it is dead because of. Confirm from the two, then delete the dead arm or fix the predicate that was meant to be reachable.
Other · Security — Whether a hand-rolled public/private IP check can be walked past — a method that unwraps IPv4-mapped IPv6 but returns the opposite verdict for the same host written as IPv4-compatible, 6to4 or NAT64.
Method: Roslyn syntax + semantics: methods that unwrap IPv4-mapped IPv6 and hand-roll IPv4 range carve-outs, checked for whether the IPv6 branch also accounts for the IPv4-compatible, 6to4 and NAT64 embeddings. Deterministic, provable per finding. Advisory.
Other · Code Health — Whether a loop that shortens a string until it fits a length budget has a floor — one with none grinds the value down to the empty string, or past it into a negative-length `Substring`.
Method: Roslyn syntax + semantics: while/do loops whose body's only effect on a string is to drop its last character, checked for whether anything — a direct comparison on the length, a body guard, a break — bounds that length below. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `while`/`do` loop whose body’s one assignment to a value is `x = x.slice(0, -1)` or `x = x.slice|substring|substr(0, x.length - 1)`, driven by a condition that reads `x.length` only as a term of a larger expression — never compared directly, never tested for truthiness, and with no other read of `x` — and whose body has no `break`, `return`, `throw` or `if` naming `x`. Deterministic, provable per finding. Advisory.
Other · Code Health — Whether a type's disposal matches what it OWNS — releasing what it created, leaving alone what it was handed, and not declaring a finalizer for state that has nothing unmanaged to finalize.
Method: Roslyn syntax + semantics: every assignment to a disposable field is read to decide whether the type CREATED the value or was handed it, and the type's disposal is checked against that answer — an injected interface it disposes, a value it constructed and never releases, a finalizer on a type holding nothing unmanaged, and a disposable local whose every reference is a plain member read. A value handed to a container that disposes its contents (a parent control's `Controls` collection, a component `IContainer`) is released by that container and is not reported; generated code is out of population. On a repository with no .NET source the same ownership questions are read in JavaScript/TypeScript off the engine’s own token stream (test, vendored, generated and minified paths not): a class declaring `dispose()`, `[Symbol.dispose]()` or `[Symbol.asyncDispose]()` that disposes a field it was handed through a constructor parameter typed as a repository interface or resolved by a dependency-injection container; that assigns a field only ever from `new X(…)` of a disposable class and neither releases it anywhere in the class nor names it in its disposal member or a method that member calls, nor hands it to anything else; and a `const`/`let` local built from literals only whose every reference opens a statement operating on a non-release member of it. A class is disposable when every repository declaration of its name declares or inherits a disposal member, or when it is a documented library disposable (`vscode` EventEmitter, CancellationTokenSource and Disposable; three.js geometries, materials, textures, render targets, renderers, controls and composers). The finalizer arm has no JavaScript counterpart: a class cannot declare one. Dart is read for the owned-and-never-released arm: a Flutter `State` (or a class declaring `dispose()`/`close()`) whose library-private field is written only with direct creations of a framework controller, `FocusNode`, `StreamController` or periodic `Timer` (or a `.listen(…)` into a field declared `StreamSubscription`), which nothing in the class or its library releases (`dispose`/`close`/`cancel`) and which is never handed on except as a named argument. Ruby is read for the owned-and-never-released arm and the abandoned-local arm: a class declaring an instance `close`, `dispose`, `shutdown`, `stop`, `disconnect` or `terminate` whose instance variable is written only with a blockless core descriptor creation (`File.open`/`new`, `Tempfile`, `Dir.open`, `IO.popen`, the `socket` and `openssl` socket classes) that no method of the class closes and that is never handed on (passed, returned, stored, exposed by `attr_reader`, delegated) — a class whose superclass or mixin lies outside the repository is not judged — and a blockless creation read through and dropped (`File.open(path).read`) or held in a local that is never closed, returned, passed or stored (a `&:read` block-pass, an `autoclose: false` borrow and a `fileno` hand-over are not abandonment). PHP is read for the same two arms: a class (not a trait, and not one using a trait) declaring an instance `close`, `dispose`, `shutdown`, `stop`, `disconnect` or `terminate` whose `private` property (or a `final` class's `protected` one) is written only with a direct core `fopen`, `tmpfile`, `popen`, `proc_open`, `fsockopen`, `stream_socket_client`/`server` or `opendir` that nothing in the class closes (`fclose`, `pclose`, `closedir`, `unset`, a reset to `null`) and that is never handed on, and a handle held in a function's local, or read through as the argument of a reader, that is never closed, returned, passed, captured or stored; a `php://` stream, `curl_init`, `SplFileObject`, `PDO` and a function the repository declares under the core name are not read. Deterministic, provable per finding. Advisory.
Other · Code Health — Whether a `when` guard is free of side effects — a guard that increments a counter or assigns while deciding whether its arm matches applies that change during PATTERN MATCHING, on an arm that may not be selected, and skips it entirely when a short-circuit to its left answers first.
Method: Roslyn syntax: `when` guards on case labels and switch-expression arms, read for a mutation (`++`/`--`/assignment) sitting in a position the guard's own `&&`/`||`/`??`/`?:`/`?.` can skip. Deterministic, provable per finding. Advisory.
Other · Code Health — Whether a value the caller is invited to supply is the value the type actually uses — a constructor parameter stored in a private field that nothing ever reads while the default it was given is spelled out a second time at the site that should have read it, a keyed lookup that falls back to a different setting than the one its key names while the same type falls back to the matching one for that same key, or a culture-sensitive parse given no format provider by a type that feeds its own settable culture to the same kind of parse elsewhere, or a number an entry point writes to standard output under the host's culture while the same entry point formats with the invariant culture elsewhere. Either way, every caller who supplies a value silently gets something else.
Method: Roslyn syntax: private instance fields of a non-partial type assigned in a constructor from one of its own parameters with a `??` fallback, checked for whether anything in the type body reads the field and whether that same fallback expression is spelled out again outside the constructor; and `??` fallbacks onto a member access from a lookup call carrying exactly one string literal, grouped by that key across the type and checked for a fallback member whose folded name disagrees with the key while a sibling site for the same key agrees with it. On a repository with no .NET source the first two arms read JavaScript/TypeScript off the engine’s own token stream (tests included, bundles and vendored paths not): a `#x`, `private` or `private` parameter-property instance field filled in the constructor from a parameter (or one member of one) through `??`/`||` or a parameter default, never read anywhere in the file by name, whose constructed default is spelled again in the class body; and `lookup("key") ?? s.member` grouped by key per class, or per module outside every class. The culture arm has no JavaScript counterpart: its parses take no locale. Deterministic, provable per finding. Advisory.
Do you agree with this assessment?
X27 · Collection changed while being enumerated10.0 / 10Exemplary○ Nothing flagged
Other · Code Health — Whether a `for … in` loop leaves the `List`, `Map` or `Set` it is walking alone — Dart's collection iterators check that the collection has not changed since the loop began, so a body that adds to or removes from the very collection the loop is walking (or the map whose `keys`, `values` or `entries` it walks) makes the next step throw `ConcurrentModificationError` and the remaining elements are never seen. Whether a `for (x in c)` or `c.forEach { … }` leaves the collection it is walking alone — a `mutableListOf`/`ArrayList`, `mutableMapOf`/`HashMap` or `mutableSetOf`/`HashSet` is a `java.util` collection on the JVM and is walked by its own fail-fast iterator, so a body that adds to or removes from the very collection the loop is walking makes the next step throw `ConcurrentModificationException` and the remaining elements are never seen.
Method: Roslyn syntax + semantics: `foreach` statements whose body calls a structural mutator (`Add`/`Remove`/`Clear`/`Insert`/…) on the very expression the loop is enumerating. Two arms. ARM A — the source is a concrete fragile BCL collection, or a live `Keys`/`Values` view over one, and the mutator resolves to that same collection's own member; concurrent and immutable collections and arrays are outside the population by construction, since their enumerators survive a structural change. ARM B — the source is an argument-less accessor CALL on a receiver whose body is in source: the accessor must return a stored field VERBATIM and a sibling member must structurally change that same field, both read off the implementations rather than from the members' names. A mutation the loop provably exits immediately after (`break`/`return`/`throw`/`goto`), or one written inside a nested loop or a lambda, is counted and never reported. Deterministic, provable per finding. Advisory.
Do you agree with this assessment?
X28 · Index access outside its own emptiness guard10.0 / 10Exemplary○ Nothing flagged
Other · Code Health — Whether a condition that tests a value for emptiness indexes that same value only where the test holds — an `||` written one parenthesis too far to the left leaves an index access outside the guard beside it, so the empty case the guard exists to anticipate reaches the index and throws.
Method: Roslyn syntax only, no semantic model: the OUTERMOST `&&`/`||` of every boolean condition, read for a symbol the condition tests for emptiness (`string.IsNullOrEmpty`/`IsNullOrWhiteSpace`, a `Length`/`Count` comparison against a literal, `Any()`, a `Length`/`Count` pattern, or a comparison against `""`) and ALSO indexes. Each `symbol[...]` access is placed by a boolean-reachability walk from the access up to the outermost connective: an access is COVERED when some enclosing step has it in the right operand and the left operand, under the truth value that step forces, proves the symbol non-empty — a recursion over `&&`/`||` whose true- and false-directions are asymmetric. A finding needs BOTH an uncovered access and a covered one on the same symbol in the same condition, which is the agreeing twin that separates a misplaced parenthesis from an unrelated length test. Bare index accesses with no emptiness test in the condition are neither counted nor reported; a non-identifier receiver and a lambda nested inside the condition are outside the population. Deterministic, provable per finding. Advisory.
Other · Code Health — Whether exceptions are handled rather than silently swallowed or rethrown with lost stack traces.
Method: Roslyn syntax scan: every catch clause counted; empty catches and bare rethrows flagged. Population is all catch clauses, not estimated. Deterministic, hard fact.
An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it. (×15) — lib/main.dart:112, lib/utils/ai.dart:310, lib/utils/ai.dart:625, …
`catch (_)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter. (×19) — lib/utils/agentic_tools.dart:787, lib/utils/ai.dart:122, lib/utils/ai.dart:140, …
`catch (e)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter. (×6) — lib/utils/agentic_tools.dart:860, lib/utils/agentic_tools.dart:1731, lib/utils/copilot_chat.dart:102, …
What to do
Swallowed exception (empty catch)
Do you agree with this assessment?
X30 · Support guard that admits what it rejects10.0 / 10Exemplary○ Nothing flagged
Other · Code Health — Whether a guard written as a NEGATED `||` says what its author meant — `!(a || b || x != k)` is `!a && !b && x == k` by De Morgan, so a bail-out that mixes capabilities the code needs with a fault it refuses turns inside out: it fires only where the capabilities are ABSENT, and lets every value the fault term names walk straight into the body that cannot handle it.
Method: Roslyn syntax only, no semantic model: every logical-not whose operand is a parenthesised `||` chain of two or more disjuncts, flattened (a left-nested `a || b || c` read once would see `(a || b)` as one disjunct). A site enters the population on that shape alone. A finding additionally needs the disjuncts to DISAGREE in polarity: at least one bare boolean read — an identifier or member access, never an invocation, which is a predicate rather than a capability flag — and at least one `x != <constant>`, the only form that negates into an exact-value pin (`== null` negates into a looser requirement and is outside the fault set). Consistently-polarised disjunctions, all-fault or all-capability, are counted and never reported; a negated `&&` is outside the population entirely. No same-receiver gate: it was measured to cost a real defect and remove no false positive. Deterministic, provable per finding. Advisory.
Other · Code Health — Whether Dart's sound null safety is on and is not undermined by null assertions — a package whose `environment: sdk:` lower bound is 2.12 or above is null safe, so `String` cannot hold null and `String?` must be checked before use, and each postfix `!` is a run-time `Null check operator used on a null value` the author has told the analyzer cannot happen.
Method: Roslyn compiler-options scan: NullableContextOptions per project; null-forgiving (!) suppression density per 1k syntax nodes. Deterministic, adoption plus suppression penalty.
Do you agree with this assessment?
Reference — by lens
The score is the rank-weighted fold of these lenses (worst-heaviest), each including its meta-dimensions; a lens with a Critical contributor is capped at Fair (its band reads "gated by …") and is never the strongest area however high its average.
Unscored — 3 check(s) recorded observations but carry no score
These checks ran and found something, but they do not carry a score — either by design (an advisory check reports evidence rather than grading it) or because they could not be scored here. They are excluded from the score for that reason, not because there was nothing to see.
X10 Duplicated predicate — 10 observation(s) recorded · Advisory — this card reports evidence and never carries a score.
X6 Hand-rolled structured-format parsing — 1 observation(s) recorded · Advisory — this card reports evidence and never carries a score.
X7 Silent fallback defaults — 4 observation(s) recorded · Advisory — this card reports evidence and never carries a score.
Not evidenced — 1 control(s) we could not find positive evidence for
These checks grade a working control, and the repository shows no evidence of one. That is deliberately not scored as a zero: a repository cannot show an ops runbook, a database TTL or an infrastructure-side audit log, so absence of evidence here is not evidence the control is missing. It is also not a statement that the check is irrelevant to this codebase — the thing it grades applies; we just could not see it. Excluded from the score either way.
P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
Not included — 57 check(s) not relevant to this codebase
These checks had nothing to measure here (no tests, no git history, the codebase is small, or the architecture style doesn't apply), so they're omitted above rather than scored low.
AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
AX2 Stateful singletons — No container singleton was found, so there is no shared instance for concurrent requests to race on. No class in this Kotlin code is a Spring, JSR-330 or CDI singleton bean. Dart isolates share no mutable memory, so no two requests write one object at the same instant.
AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX7 Slice cohesion — not applicable — not a vertical-slice architecture
AX8 Test isolation — no test/production split to check
AXB1 Runtime evidence locked — no reproducible boot — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
C1 Data Protection — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a Drift table, an Isar, ObjectBox, Floor or Hive entity, or a Serverpod table model — and no database or data-store client (sqflite, Drift, Isar, Hive, Realm, Firestore, Supabase, postgres, …) in the source either, so this repository keeps no data at rest for these controls to protect.
C3 Audit Trail — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a Drift table, an ObjectBox/Floor @Entity, an Isar @collection, a Hive @HiveType or a Serverpod table model — and no database or data-store client (sqflite, Firestore, Supabase, postgres, …) imported either, so this repository keeps no sensitive data whose changes an audit trail would record. If it does (through a hosted backend configured outside this repository, for instance), the trail belongs to wherever that data is stored.
C4 Data Retention — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a Drift table, an ObjectBox/Floor @Entity, an Isar @collection, a Hive @HiveType or a Serverpod table model — and no database or data-store client (sqflite, Firestore, Supabase, postgres, …) imported either, so this repository keeps no personal data whose lifetime a retention limit would bound.
C5 Data-Subject Rights — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a Drift table, an ObjectBox/Floor @Entity, an Isar @collection, a Hive @HiveType or a Serverpod table model — and no database or data-store client (sqflite, Firestore, Supabase, postgres, …) imported either, so this repository keeps no personal data for a data subject to erase, export or consent over.
D10 Test Quality — No tests were found in the analyzed repository to assess for quality.
D11 Test Reliability — No test suite was found to re-run, so reliability couldn't be assessed. Two searches produced that zero and both came back empty: the classifier that reads the loaded workspace recognised no suite it could run, and a walk of the source on disk — which covers the JS/TS `*.test.*` and `*.spec.*` conventions and probes for a Pester suite — found no test source in any other ecosystem either. Neither search reaches a suite that is missing from the loaded workspace and carries no name either walk recognises, so this is 'no suite found by those two searches', not a verdict that the repository has none.
D12 Dependency Hygiene — Not scored — 22 Maven/Gradle manifest(s) were read, stating a version for 22 dependency(ies) and leaving 0 to a parent or an imported BOM, but no build resolved the dependency graph, so the outdated signal was not established. NOT a finding that these dependencies are current or healthy.
D16 Bus Factor — single-maintainer repository — bus factor is not applicable
D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
D21 Naming Consistency — D21 withholds its sibling role token rows: 1 candidate(s) found and not reported.
D22 Internal API Consistency — No intentionally-exposed public API to evaluate for consistency.
D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ sibling projects each declaring an entity of their own or taking another project's integration events. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
D24 Comment Value — D24 reads C#, Visual Basic, TypeScript and JavaScript comments only — this repository's production source is .dart, .kt, which was left unread. Not scored: this is a gap in the analyzer, not a verdict about this repository.
D25 ADR Conformance — no ADRs to check
D27 Navigability — D27 counts a call into the standard library or a dependency as unresolved for this repository's language (.dart), so too few call sites counted as resolved to assess navigability. Not scored: this is a gap in the analyzer, not a verdict about this repository.
D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.
D32 Data Compliance (PII/GDPR) — 1 file(s) were not parsed by semgrep — the PII/GDPR ruleset never ran over them
D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
DM1 Domain Modelling — not scored — this repository shows only 1 of the 3 signals this lens looks for (1 value object(s))
ED2 Event/command shape — not scored — deciding whether a command has more than one competing handler requires resolving the call graph, which this analysis does not build from source alone for this language. Reported as guidance rather than measured
ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
M4 Documentation accuracy — Not applicable: the 3 current-state document(s) make no claim of a kind M4 checks.
P12 CI test-gate honesty — Reported, not scored — and nothing was matched here. The coverage check applies to any stack, and the automatic-re-run check to any GitHub-Actions workflow, but the checks for excluded tests, skipped tests and sleep-based synchronisation currently recognise only some ecosystems' test-runner idioms, so on a repository built with another stack the zeros below mean 'not checked', not 'clean'.
P7 Outbound HTTP resilience — not applicable — no HTTP server, API framework or worker entry point was found in the Dart, JVM, JavaScript/TypeScript source, so there is no service whose uptime a failing dependency could take down
P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
P9 Domain vs controller coverage — coverage not measured: this check compares the coverage of the analyzer's own test run across the domain and web layers, and that run measured none here — Test coverage (D8) says why
PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for classes extending benchmark_harness's `BenchmarkBase`, `AsyncBenchmarkBase` or `PerfBenchmarkBase` (directly or through a base of your own), `benchmark(…)` calls under the pub `benchmark` package, Flutter's `benchmarkWidgets`, `watchPerformance` or `traceAction` in a test importing flutter_test, integration_test or flutter_driver, or benchmark_harness, benchmark or web_benchmarks in a pubspec.yaml, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
PF2 Allocation hygiene — Not scored: this check counted allocation-aware idioms (Span, pools, stackalloc) per line, which describes what kind of code a repository is rather than whether it has an allocation problem, so it was withdrawn. Nothing here is a finding about your code.
X15 Unvalidated length from an untrusted reader — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X17 Uncapped recursion over a caller-supplied document — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X19 Unrestored process-global state — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X2 Cancellation propagation — no C# was loaded; this repository's Dart and Kotlin were read, and no request in it can be cancelled by a caller (Dio, or package:http's Abortable requests; Ktor, OkHttp's newCall or a URL stream, from a suspend function) — a Kotlin request outside a suspend function has no caller's cancellation to honour
X20 Mistyped argument guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X22 Contradicted release guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X23 Unguarded diagnostic materialisation — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X24 Document value interpolated into markup unescaped — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X26 Unsynchronised callback handoff — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X29 Per-element action decided by a fixed element — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
X4 Structured logging — This check asks whether log calls keep a message's values apart from its text, which needs a logger that can carry them as fields. This repository's Dart was read, and it logs through none: package:logging, package:logger, talker and dart:developer take one finished message and no template arguments or fields (as log4net does in C#), so an interpolated message there loses nothing the API could have kept. Sentry's structured logs (`Sentry.logger`) would be judged.
X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Appendix A — Findings (grouped)
The findings behind the scores, grouped by severity, then by dimension and kind. The high-severity issues are enumerated in full below; items per group are capped at 25 with any overflow stated explicitly per group, never silently truncated. The complete machine-readable list of every finding (all severities) is the companion findings.md in this report's bundle.
No automated tests — No automated tests — no test code was found in this repository. Untested code is the largest single risk to changing it safely. Start with the code you change most often: add a suite in a framework a runner can collect (the `test` package (`dart test` / `flutter test`)), and run it in CI so the gap cannot reopen.
MethodTooLong: _SettingsState.build lib/ui/settings.dart:2321— MethodTooLong — build runs 2703 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 2603 over it, 27.03× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: _EditorPageState.build REDACTED:1651— MethodTooLong — build runs 1381 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 1281 over it, 13.81× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: _HomeState.build lib/ui/home.dart:292— MethodTooLong — build runs 1104 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 1004 over it, 11.04× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: CopilotChat.chatWithModel lib/utils/copilot_chat.dart:565— MethodTooLong — chatWithModel runs 545 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 445 over it, 5.45× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: _SourceControlState.build lib/ui/widgets.dart:8270— MethodTooLong — build runs 483 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 383 over it, 4.83× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: _DownloadManagerState.build lib/ui/downloads.dart:1321— MethodTooLong — build runs 481 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 381 over it, 4.81× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: _EditorPageState.build lib/ui/widgets.dart:1462— MethodTooLong — build runs 481 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 381 over it, 4.81× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: AgenticTools.getTools lib/utils/agentic_tools.dart:1784— MethodTooLong — getTools runs 392 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 292 over it, 3.92× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: _SettingsState._showModelDialog lib/ui/settings.dart:1091— MethodTooLong — _showModelDialog runs 349 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 249 over it, 3.49× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: APITesting.build lib/ui/widgets.dart:8962— MethodTooLong — build runs 328 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 228 over it, 3.28× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: _AIChatState.build lib/ui/widgets.dart:11909— MethodTooLong — build runs 316 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 216 over it, 3.16× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: _SettingsState._showCustomEditorThemeDialog lib/ui/settings.dart:1891— MethodTooLong — _showCustomEditorThemeDialog runs 290 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 190 over it, 2.90× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: _ProjectScreenState.build lib/ui/project_screen.dart:362— MethodTooLong — build runs 270 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 170 over it, 2.70× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: _AIChatState._executeExternalToolCall lib/ui/widgets.dart:10682— MethodTooLong — _executeExternalToolCall runs 252 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 152 over it, 2.52× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: _FindWordWidgetState.build lib/ui/widgets.dart:3596— MethodTooLong — build runs 249 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 149 over it, 2.49× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: _SourceControlState._buildGitActionsRow lib/ui/widgets.dart:7220— MethodTooLong — _buildGitActionsRow runs 202 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 102 over it, 2.02× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: _AIChatState._sendLocalLlamaPrompt lib/ui/widgets.dart:11620— MethodTooLong — _sendLocalLlamaPrompt runs 190 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 90 over it, 1.90× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: _SettingsState._showCopilotSettings lib/ui/settings.dart:746— MethodTooLong — _showCopilotSettings runs 170 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 70 over it, 1.70× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: _SettingsState._showSSHDialog lib/ui/settings.dart:1569— MethodTooLong — _showSSHDialog runs 163 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 63 over it, 1.63× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: _GgufDownloadManagerState._buildTaskTile lib/ui/widgets.dart:13295— MethodTooLong — _buildTaskTile runs 163 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 63 over it, 1.63× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: _SourceControlState._showCreateBranchFromDialog lib/ui/widgets.dart:5088— MethodTooLong — _showCreateBranchFromDialog runs 149 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 49 over it, 1.49× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: _SetupTerminalState.build lib/terminal/terminal.dart:1352— MethodTooLong — build runs 148 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 48 over it, 1.48× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: BuyMeCoffee.build lib/ui/donation_page.dart:33— MethodTooLong — build runs 146 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 46 over it, 1.46× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: _SourceControlState._showRenameBranchDialog lib/ui/widgets.dart:5663— MethodTooLong — _showRenameBranchDialog runs 146 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 46 over it, 1.46× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
MethodTooLong: _GithubPageState._buildSignInPage lib/ui/github_page.dart:334— MethodTooLong — _buildSignInPage runs 144 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 44 over it, 1.44× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
Swallowed exception (caught, then discarded) lib/utils/agentic_tools.dart:787— `catch (_)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/agentic_tools.dart:860— `catch (e)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/agentic_tools.dart:1731— `catch (e)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/ai.dart:122— `catch (_)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/ai.dart:140— `catch (_)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/ai.dart:147— `catch (_)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/ai.dart:179— `catch (_)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/ai.dart:219— `catch (_)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/ai.dart:231— `catch (_)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/ai.dart:577— `catch (_)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/copilot_chat.dart:102— `catch (e)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/copilot_chat.dart:155— `catch (_)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/copilot_chat.dart:193— `catch (e)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/copilot_chat.dart:718— `catch (e)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/functions.dart:1606— `catch (e)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/functions.dart:3026— `catch (_)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/functions.dart:3041— `catch (_)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/functions.dart:3634— `catch (_)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/functions.dart:3690— `catch (_)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/functions.dart:3722— `catch (_)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/functions.dart:3763— `catch (_)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/functions.dart:3808— `catch (_)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) lib/utils/functions.dart:3827— `catch (_)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) REDACTED:205— `catch (_)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
Swallowed exception (caught, then discarded) REDACTED:910— `catch (_)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter.
FileTooLong: ui/widgets.dart lib/ui/widgets.dart— FileTooLong — 9904 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 9404 over it, 19.81× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: ui/settings.dart lib/ui/settings.dart— FileTooLong — 4356 significant lines (blank, comment-only and punctuation-only lines excluded), about 99% of them inside a single declaration: _SettingsState (32-6096). The bar is 500 significant lines; this is 3856 over it, 8.71× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
FileTooLong: utils/functions.dart lib/utils/functions.dart— FileTooLong — 2952 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 2452 over it, 5.90× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: REDACTED REDACTED— FileTooLong — 2629 significant lines (blank, comment-only and punctuation-only lines excluded), about 95% of them inside a single declaration: _EditorPageState (50-3519). The bar is 500 significant lines; this is 2129 over it, 5.26× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
FileTooLong: utils/agentic_tools.dart lib/utils/agentic_tools.dart— FileTooLong — 1767 significant lines (blank, comment-only and punctuation-only lines excluded), about 90% of them inside a single declaration: AgenticTools (19-2359). The bar is 500 significant lines; this is 1267 over it, 3.53× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
FileTooLong: ui/downloads.dart lib/ui/downloads.dart— FileTooLong — 1394 significant lines (blank, comment-only and punctuation-only lines excluded), about 97% of them inside a single declaration: _DownloadManagerState (40-2078). The bar is 500 significant lines; this is 894 over it, 2.79× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
FileTooLong: ui/home.dart lib/ui/home.dart— FileTooLong — 1314 significant lines (blank, comment-only and punctuation-only lines excluded), about 97% of them inside a single declaration: _HomeState (37-1838). The bar is 500 significant lines; this is 814 over it, 2.63× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
FileTooLong: ui_bloc/ui_bloc.dart lib/bloc/ui_bloc/ui_bloc.dart— FileTooLong — 1121 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 621 over it, 2.24× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: terminal/terminal.dart lib/terminal/terminal.dart— FileTooLong — 991 significant lines (blank, comment-only and punctuation-only lines excluded), about 68% of them inside a single declaration: _SetupTerminalState (277-1569). The bar is 500 significant lines; this is 491 over it, 1.98× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
FileTooLong: ui/github_page.dart lib/ui/github_page.dart— FileTooLong — 971 significant lines (blank, comment-only and punctuation-only lines excluded), about 98% of them inside a single declaration: _GithubPageState (25-1387). The bar is 500 significant lines; this is 471 over it, 1.94× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
FileTooLong: utils/copilot_chat.dart lib/utils/copilot_chat.dart— FileTooLong — 932 significant lines (blank, comment-only and punctuation-only lines excluded), about 98% of them inside a single declaration: CopilotChat (20-1222). The bar is 500 significant lines; this is 432 over it, 1.86× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
FileTooLong: utils/languages.dart lib/utils/languages.dart— FileTooLong — 828 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 328 over it, 1.66× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: utils/themes.dart lib/utils/themes.dart— FileTooLong — 773 significant lines (blank, comment-only and punctuation-only lines excluded), about 72% of them inside a single declaration: terminalTheme (78-724). The bar is 500 significant lines; this is 273 over it, 1.55× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
FileTooLong: utils/ai.dart lib/utils/ai.dart— FileTooLong — 749 significant lines (blank, comment-only and punctuation-only lines excluded), about 66% of them inside a single declaration: Models (25-719). The bar is 500 significant lines; this is 249 over it, 1.50× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
FileTooLong: ui/file_manager.dart lib/ui/file_manager.dart— FileTooLong — 653 significant lines (blank, comment-only and punctuation-only lines excluded), about 82% of them inside a single declaration: _FileManagerPageState (29-840). The bar is 500 significant lines; this is 153 over it, 1.31× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
FileTooLong: utils/copilot_lsp.dart lib/utils/copilot_lsp.dart— FileTooLong — 628 significant lines (blank, comment-only and punctuation-only lines excluded), about 66% of them inside a single declaration: CopilotLsp (111-726). The bar is 500 significant lines; this is 128 over it, 1.26× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
FileTooLong: ui_bloc/ui_state.dart lib/bloc/ui_bloc/ui_state.dart— FileTooLong — 531 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 31 over it, 1.06× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
FileTooLong: ui/project_screen.dart lib/ui/project_screen.dart— FileTooLong — 527 significant lines (blank, comment-only and punctuation-only lines excluded), about 97% of them inside a single declaration: _ProjectScreenState (23-754). The bar is 500 significant lines; this is 27 over it, 1.05× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
FileTooLong: roxum/MainActivity.kt android/app/src/main/kotlin/com/roxum/MainActivity.kt— FileTooLong — 505 significant lines (blank, comment-only and punctuation-only lines excluded), about 94% of them inside a single declaration: MainActivity (34-724). The bar is 500 significant lines; this is 5 over it, 1.01× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
ClassTooLong: _SettingsState lib/ui/settings.dart:32— ClassTooLong — 4329 significant lines (blank, comment-only and punctuation-only lines excluded), 21 methods. The bar is 400 significant lines; this is 3929 over it, 10.82× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
ClassTooLong: _SourceControlState lib/ui/widgets.dart:4111— ClassTooLong — 3473 significant lines (blank, comment-only and punctuation-only lines excluded), 54 methods. The bar is 400 significant lines; this is 3073 over it, 8.68× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
ClassTooLong: _EditorPageState REDACTED:50— ClassTooLong — 2498 significant lines (blank, comment-only and punctuation-only lines excluded), 51 methods. The bar is 400 significant lines; this is 2098 over it, 6.25× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
ClassTooLong: _AIChatState lib/ui/widgets.dart:9452— ClassTooLong — 2274 significant lines (blank, comment-only and punctuation-only lines excluded), 58 methods. The bar is 400 significant lines; this is 1874 over it, 5.69× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
ClassTooLong: AgenticTools lib/utils/agentic_tools.dart:19— ClassTooLong — 1597 significant lines (blank, comment-only and punctuation-only lines excluded), 54 methods. The bar is 400 significant lines; this is 1197 over it, 3.99× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
ClassTooLong: _DownloadManagerState lib/ui/downloads.dart:40— ClassTooLong — 1355 significant lines (blank, comment-only and punctuation-only lines excluded), 34 methods. The bar is 400 significant lines; this is 955 over it, 3.39× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
ClassTooLong: _HomeState lib/ui/home.dart:37— ClassTooLong — 1281 significant lines (blank, comment-only and punctuation-only lines excluded), 8 methods. The bar is 400 significant lines; this is 881 over it, 3.20× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
ClassTooLong: _GithubPageState lib/ui/github_page.dart:25— ClassTooLong — 951 significant lines (blank, comment-only and punctuation-only lines excluded), 24 methods. The bar is 400 significant lines; this is 551 over it, 2.38× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
ClassTooLong: CopilotChat lib/utils/copilot_chat.dart:20— ClassTooLong — 918 significant lines (blank, comment-only and punctuation-only lines excluded), 26 methods. The bar is 400 significant lines; this is 518 over it, 2.30× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
ClassTooLong: _EditorPageState lib/ui/widgets.dart:1016— ClassTooLong — 810 significant lines (blank, comment-only and punctuation-only lines excluded), 18 methods. The bar is 400 significant lines; this is 410 over it, 2.03× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
ClassTooLong: _DirectoryTreeViewerState lib/ui/widgets.dart:2190— ClassTooLong — 740 significant lines (blank, comment-only and punctuation-only lines excluded), 30 methods. The bar is 400 significant lines; this is 340 over it, 1.85× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
ClassTooLong: _SetupTerminalState lib/terminal/terminal.dart:277— ClassTooLong — 678 significant lines (blank, comment-only and punctuation-only lines excluded), 24 methods. The bar is 400 significant lines; this is 278 over it, 1.70× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
ClassTooLong: _FileManagerPageState lib/ui/file_manager.dart:29— ClassTooLong — 533 significant lines (blank, comment-only and punctuation-only lines excluded), 22 methods. The bar is 400 significant lines; this is 133 over it, 1.33× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
ClassTooLong: _FindWordWidgetState lib/ui/widgets.dart:3332— ClassTooLong — 525 significant lines (blank, comment-only and punctuation-only lines excluded), 9 methods. The bar is 400 significant lines; this is 125 over it, 1.31× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
ClassTooLong: _ProjectScreenState lib/ui/project_screen.dart:23— ClassTooLong — 509 significant lines (blank, comment-only and punctuation-only lines excluded), 10 methods. The bar is 400 significant lines; this is 109 over it, 1.27× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
ClassTooLong: Models lib/utils/ai.dart:25— ClassTooLong — 495 significant lines (blank, comment-only and punctuation-only lines excluded), 22 methods. The bar is 400 significant lines; this is 95 over it, 1.24× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
ClassTooLong: MainActivity android/app/src/main/kotlin/com/roxum/MainActivity.kt:34— ClassTooLong — 474 significant lines (blank, comment-only and punctuation-only lines excluded), 28 methods. The bar is 400 significant lines; this is 74 over it, 1.19× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
ClassTooLong: CopilotLsp lib/utils/copilot_lsp.dart:111— ClassTooLong — 414 significant lines (blank, comment-only and punctuation-only lines excluded), 39 methods. The bar is 400 significant lines; this is 14 over it, 1.04× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
Swallowed exception (empty catch) lib/main.dart:112— An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
Swallowed exception (empty catch) lib/utils/ai.dart:310— An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
Swallowed exception (empty catch) lib/utils/ai.dart:625— An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
Swallowed exception (empty catch) lib/utils/copilot_chat.dart:254— An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
Swallowed exception (empty catch) lib/utils/copilot_chat.dart:266— An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
Swallowed exception (empty catch) lib/utils/functions.dart:224— An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
Swallowed exception (empty catch) lib/utils/functions.dart:3855— An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
Swallowed exception (empty catch) REDACTED:190— An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
Swallowed exception (empty catch) REDACTED:728— An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
Swallowed exception (empty catch) REDACTED:768— An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
Swallowed exception (empty catch) REDACTED:1556— An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
Swallowed exception (empty catch) lib/ui/file_manager.dart:137— An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
Swallowed exception (empty catch) lib/ui/file_manager.dart:190— An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
Swallowed exception (empty catch) lib/ui/file_manager.dart:425— An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
Swallowed exception (empty catch) lib/ui/file_manager.dart:430— An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
Duplicated block (11 lines × 2) lib/ui/downloads.dart:953— lib/ui/downloads.dart:953-963 | lib/ui/downloads.dart:1110-1120 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (11 lines × 2) lib/ui/github_page.dart:1025— lib/ui/github_page.dart:1025-1035 | lib/ui/github_page.dart:1039-1049 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/github_page.dart:1025` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (11 lines × 2) lib/ui/settings.dart:2587— lib/ui/settings.dart:2587-2597 | lib/ui/settings.dart:2901-2911 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:2587` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `lib/ui/settings.dart:2900` calls `getInstance` and `lib/ui/settings.dart:2586` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (11 lines × 2) lib/ui/settings.dart:5663— lib/ui/settings.dart:5663-5673 | lib/ui/widgets.dart:13467-13477 — before extracting anything, compare `lib/ui/settings.dart` and `lib/ui/widgets.dart` as WHOLE FILES: this scan already matched 6 separate duplicated blocks between them, totalling at least 70 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:5663` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (11 lines × 2) lib/ui/widgets.dart:501— lib/ui/widgets.dart:501-511 | lib/ui/widgets.dart:531-541 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (11 lines × 2) lib/ui/widgets.dart:6160— lib/ui/widgets.dart:6160-6170 | lib/ui/widgets.dart:7179-7191 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:6160` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (11 lines × 2) lib/ui/widgets.dart:9964— lib/ui/widgets.dart:9964-9974 | lib/ui/widgets.dart:10098-10108 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:9964` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (11 lines × 2) lib/ui/widgets.dart:11595— lib/ui/widgets.dart:11595-11606 | lib/ui/widgets.dart:11873-11883 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:11595` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9 lines × 2) lib/ui/downloads.dart:1381— lib/ui/downloads.dart:1381-1391 | lib/ui/downloads.dart:1735-1743 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/downloads.dart:1381` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (9 lines × 2) lib/ui/downloads.dart:1632— lib/ui/downloads.dart:1632-1640 | lib/ui/downloads.dart:1916-1924 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (9 lines × 2) REDACTED:572— REDACTED:572-580 | REDACTED:3581-3590 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `REDACTED:572` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (9 lines × 2) lib/ui/widgets.dart:7451— lib/ui/widgets.dart:7451-7459 | lib/ui/widgets.dart:7466-7474 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:7451` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9 lines × 2) lib/ui/widgets.dart:7660— lib/ui/widgets.dart:7660-7668 | lib/ui/widgets.dart:7672-7680 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:7660` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9 lines × 2) lib/ui/widgets.dart:8642— lib/ui/widgets.dart:8642-8650 | lib/ui/widgets.dart:8894-8902 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:8642` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (9 lines × 2) lib/utils/agentic_tools.dart:1247— lib/utils/agentic_tools.dart:1247-1255 | lib/utils/agentic_tools.dart:1347-1355 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/utils/agentic_tools.dart:1247` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9 lines × 2) lib/utils/copilot_chat.dart:864— lib/utils/copilot_chat.dart:864-872 | lib/utils/copilot_chat.dart:1065-1073 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/utils/copilot_chat.dart:864` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (13 lines × 2) lib/ui/github_page.dart:401— lib/ui/github_page.dart:401-413 | lib/ui/github_page.dart:916-928 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/github_page.dart:401` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (13 lines × 2) lib/ui/home.dart:912— lib/ui/home.dart:912-924 | lib/ui/home.dart:1423-1435 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/home.dart:912` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (13 lines × 2) lib/ui/settings.dart:2111— lib/ui/settings.dart:2111-2123 | lib/ui/settings.dart:2134-2146 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:2111` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (13 lines × 2) lib/ui/settings.dart:4312— lib/ui/settings.dart:4312-4324 | lib/ui/settings.dart:4460-4472 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:4312` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (13 lines × 2) lib/ui/widgets.dart:10727— lib/ui/widgets.dart:10727-10739 | lib/ui/widgets.dart:10878-10890 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:10727` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (13 lines × 2) lib/utils/copilot_lsp.dart:676— lib/utils/copilot_lsp.dart:676-688 | lib/utils/copilot_lsp.dart:692-704 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/utils/copilot_lsp.dart:676` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The `return` at the foot of the matched lines is the enclosing body's own terminal exit, not an early one: it moves with them unchanged, and each site calls the extracted unit from the position that `return` occupied — no decision has to be handed back and re-acted on.
Duplicated block (13 lines × 2) lib/utils/functions.dart:3814— lib/utils/functions.dart:3814-3826 | lib/utils/functions.dart:3842-3854 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/utils/functions.dart:3814` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
TooManyMethods: _AIChatState lib/ui/widgets.dart:9452— TooManyMethods — 58 methods. The bar is 30 methods; this is 28 over it, 1.93× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
TooManyMethods: _SourceControlState lib/ui/widgets.dart:4111— TooManyMethods — 54 methods. The bar is 30 methods; this is 24 over it, 1.80× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
TooManyMethods: AgenticTools lib/utils/agentic_tools.dart:19— TooManyMethods — 54 methods. The bar is 30 methods; this is 24 over it, 1.80× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
TooManyMethods: _EditorPageState REDACTED:50— TooManyMethods — 51 methods. The bar is 30 methods; this is 21 over it, 1.70× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
TooManyMethods: CopilotLsp lib/utils/copilot_lsp.dart:111— TooManyMethods — 39 methods. The bar is 30 methods; this is 9 over it, 1.30× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
TooManyMethods: _DownloadManagerState lib/ui/downloads.dart:40— TooManyMethods — 34 methods. The bar is 30 methods; this is 4 over it, 1.13× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
Duplicated block (19–20 lines × 2) lib/ui/downloads.dart:1695— lib/ui/downloads.dart:1695-1713 | lib/ui/downloads.dart:1979-1998 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/downloads.dart:1695` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (19–20 lines × 2) lib/ui/file_manager.dart:303— lib/ui/file_manager.dart:303-321 | lib/ui/file_manager.dart:960-979 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/file_manager.dart:303` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (19–20 lines × 2) lib/ui/home.dart:834— lib/ui/home.dart:834-852 | lib/ui/home.dart:1264-1283 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/home.dart:834` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (19–20 lines × 2) lib/ui/settings.dart:2685— lib/ui/settings.dart:2685-2704 | lib/ui/settings.dart:5633-5651 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:2685` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (19–20 lines × 2) lib/ui/widgets.dart:2398— lib/ui/widgets.dart:2398-2417 | lib/ui/widgets.dart:2531-2549 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:2398` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (19–20 lines × 2) lib/utils/agentic_tools.dart:288— lib/utils/agentic_tools.dart:288-307 | lib/utils/agentic_tools.dart:919-937 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/utils/agentic_tools.dart:288` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. The `return` at the foot of the matched lines is the enclosing body's own terminal exit, not an early one: it moves with them unchanged, and each site calls the extracted unit from the position that `return` occupied — no decision has to be handed back and re-acted on.
Duplicated block (14 lines × 2) lib/bloc/ui_bloc/ui_bloc.dart:849— lib/bloc/ui_bloc/ui_bloc.dart:849-862 | lib/bloc/ui_bloc/ui_bloc.dart:972-985 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/bloc/ui_bloc/ui_bloc.dart:849` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (14 lines × 2) lib/bloc/ui_bloc/ui_bloc.dart:1132— lib/bloc/ui_bloc/ui_bloc.dart:1132-1145 | lib/utils/copilot_chat.dart:273-286 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (14 lines × 2) lib/ui/downloads.dart:609— lib/ui/downloads.dart:609-622 | lib/ui/downloads.dart:725-740 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/downloads.dart:609` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (14 lines × 2) lib/ui/downloads.dart:1579— lib/ui/downloads.dart:1579-1592 | lib/ui/downloads.dart:1873-1886 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/downloads.dart:1579` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (14 lines × 2) lib/ui/widgets.dart:10801— lib/ui/widgets.dart:10801-10814 | lib/ui/widgets.dart:10874-10887 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:10801` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The `return` at the foot of the matched lines is the enclosing body's own terminal exit, not an early one: it moves with them unchanged, and each site calls the extracted unit from the position that `return` occupied — no decision has to be handed back and re-acted on.
Duplicated block (14 lines × 2) REDACTED:991— REDACTED:991-1004 | lib/utils/agentic_tools.dart:52-65 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice.
Duplicated block (10 lines × 2) lib/ui/home.dart:852— lib/ui/home.dart:852-862 | lib/ui/project_screen.dart:617-626 — before extracting anything, compare `lib/ui/home.dart` and `lib/ui/project_screen.dart` as WHOLE FILES: this scan already matched 6 separate duplicated blocks between them, totalling at least 78 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/home.dart:852` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (10 lines × 2) lib/ui/settings.dart:295— lib/ui/settings.dart:295-304 | lib/ui/settings.dart:338-347 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:295` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (10 lines × 2) lib/ui/widgets.dart:1684— lib/ui/widgets.dart:1684-1693 | lib/ui/widgets.dart:1760-1769 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:1684` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `lib/ui/widgets.dart:1682` calls `Tooltip` and `lib/ui/widgets.dart:1759` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (10 lines × 2) lib/ui/widgets.dart:4579— lib/ui/widgets.dart:4579-4588 | lib/ui/widgets.dart:8544-8553 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:4579` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (10 lines × 2) lib/ui/widgets.dart:5993— lib/ui/widgets.dart:5993-6004 | lib/ui/widgets.dart:7011-7020 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:5993` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (10 lines × 2) lib/utils/ai.dart:115— lib/utils/ai.dart:115-124 | lib/utils/ai.dart:133-142 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/utils/ai.dart:115` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (7 lines × 2) REDACTED:463— REDACTED:463-470 | lib/ui/widgets.dart:1978-1984 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `REDACTED:463` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (7 lines × 2) REDACTED:2811— REDACTED:2811-2817 | REDACTED:2912-2918 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (7 lines × 2) lib/ui/widgets.dart:1286— lib/ui/widgets.dart:1286-1292 | lib/ui/widgets.dart:9652-9658 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:1286` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (7 lines × 2) lib/ui/widgets.dart:7890— lib/ui/widgets.dart:7890-7896 | lib/ui/widgets.dart:7936-7942 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (7 lines × 2) lib/utils/ai.dart:259— lib/utils/ai.dart:259-265 | lib/utils/ai.dart:563-569 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/utils/ai.dart:259` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (7 lines × 2) lib/ui/widgets.dart:13275— lib/ui/widgets.dart:13275-13281 | lib/ui/widgets.dart:13282-13288 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (6 lines × 2) lib/bloc/repo_bloc/repo_bloc.dart:67— lib/bloc/repo_bloc/repo_bloc.dart:67-73 | lib/bloc/repo_bloc/repo_bloc.dart:106-111 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/bloc/repo_bloc/repo_bloc.dart:67` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (6 lines × 2) lib/ui/settings.dart:2584— lib/ui/settings.dart:2584-2589 | lib/ui/settings.dart:6051-6056 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:2584` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (6 lines × 2) lib/ui/widgets.dart:1804— lib/ui/widgets.dart:1804-1809 | lib/ui/widgets.dart:1811-1818 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:1804` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately. Note first that the copies are not typed on the same thing: the declarations holding them bind `message` to `"zoom in"` in one and `"zoom out"` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (6 lines × 2) lib/ui/widgets.dart:11137— lib/ui/widgets.dart:11137-11142 | lib/ui/widgets.dart:11162-11167 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:11137` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (6 lines × 2) lib/ui/widgets.dart:11347— lib/ui/widgets.dart:11347-11353 | lib/ui/widgets.dart:11380-11385 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:11347` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (6 lines × 2) REDACTED:3000— REDACTED:3000-3005 | REDACTED:3011-3016 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `REDACTED:3000` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Hotspot: REDACTED REDACTED:1651— REDACTED changed 8 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 208 in _EditorPageState.build at line 1651. 4 of those changes were fix/bug commits, and the other 4 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-08-10..2026-11-08, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-10 14:55:24 +05:30' --until='2026-11-08 14:55:24 +05:30' --full-history --no-merges -- REDACTED`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
Hotspot: lib/ui/settings.dart lib/ui/settings.dart:2321— lib/ui/settings.dart changed 4 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 241 in _SettingsState.build at line 2321. 1 of those changes was a fix/bug commit, and the other 3 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-08-10..2026-11-08, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-10 14:55:24 +05:30' --until='2026-11-08 14:55:24 +05:30' --full-history --no-merges -- lib/ui/settings.dart`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
Hotspot: lib/ui/home.dart lib/ui/home.dart:292— lib/ui/home.dart changed 2 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 78 in _HomeState.build at line 292. 2 of those changes were fix/bug commits, so the churn is repair rather than feature work. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-08-10..2026-11-08, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-10 14:55:24 +05:30' --until='2026-11-08 14:55:24 +05:30' --full-history --no-merges -- lib/ui/home.dart`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
Hotspot: lib/ui/downloads.dart lib/ui/downloads.dart:375— lib/ui/downloads.dart changed 4 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 29 in _DownloadManagerState._startDownload at line 375. 1 of those changes was a fix/bug commit, and the other 3 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-08-10..2026-11-08, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-10 14:55:24 +05:30' --until='2026-11-08 14:55:24 +05:30' --full-history --no-merges -- lib/ui/downloads.dart`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
Hotspot: lib/ui/start_screen.dart lib/ui/start_screen.dart:90— lib/ui/start_screen.dart changed 3 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 17 in _StartScreenState._initializeApp at line 90. 1 of those changes was a fix/bug commit, and the other 2 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-08-10..2026-11-08, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-10 14:55:24 +05:30' --until='2026-11-08 14:55:24 +05:30' --full-history --no-merges -- lib/ui/start_screen.dart`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
Duplicated block (17 lines × 2) lib/bloc/repo_bloc/repo_bloc.dart:125— lib/bloc/repo_bloc/repo_bloc.dart:125-141 | lib/bloc/repo_bloc/repo_bloc.dart:207-223 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (17 lines × 2) lib/ui/settings.dart:475— lib/ui/settings.dart:475-491 | lib/ui/settings.dart:793-809 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:475` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (17 lines × 2) lib/ui/widgets.dart:3056— lib/ui/widgets.dart:3056-3072 | lib/ui/widgets.dart:3173-3189 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:3056` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (17 lines × 2) lib/ui/widgets.dart:4819— lib/ui/widgets.dart:4819-4835 | lib/ui/widgets.dart:4857-4873 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:4819` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (17 lines × 2) lib/utils/agentic_tools.dart:238— lib/utils/agentic_tools.dart:238-254 | lib/utils/agentic_tools.dart:282-298 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (11 lines × 3) REDACTED:1994— REDACTED:1994-2004 | REDACTED:2006-2016 | REDACTED:2045-2055 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `REDACTED:1994` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (11 lines × 3) lib/ui/github_page.dart:405— lib/ui/github_page.dart:405-415 | lib/ui/github_page.dart:604-614 | lib/ui/github_page.dart:920-930 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/github_page.dart:405` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (11 lines × 3) lib/ui/github_page.dart:401— lib/ui/github_page.dart:401-411 | lib/ui/github_page.dart:764-774 | lib/ui/github_page.dart:916-926 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/github_page.dart:401` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `lib/ui/github_page.dart:412` calls `Offset` and `lib/ui/github_page.dart:775` does not — after which the two agree again for 3 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (11 lines × 3) lib/ui/widgets.dart:4755— lib/ui/widgets.dart:4755-4765 | lib/ui/widgets.dart:4844-4854 | lib/ui/widgets.dart:4882-4892 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:4755` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (11 lines × 3) lib/ui/widgets.dart:8288— lib/ui/widgets.dart:8288-8298 | lib/ui/widgets.dart:8317-8327 | lib/ui/widgets.dart:9345-9355 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:8288` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Low cohesion: CopilotBloc (LCOM4 5) lib/bloc/ui_bloc/ui_bloc.dart:769— CopilotBloc's methods fall into 5 groups that share no field and call none of each other, against a bar of more than 3 for this run (LCOM4, configurable — your repository's bar is the one quoted here). Each group is a set of methods reachable from one another through shared fields or direct calls, so 5 groups means the type has that many internally-connected clusters with nothing tying them together. Types whose shape makes a high count expected — and which would otherwise dominate this list — are excluded before this row is raised, so this is a genuine split candidate rather than a metric reading. It is still a shape, not a defect: confirm the groups match responsibilities you can name before splitting.
Low cohesion: FlutterSwitchState (LCOM4 5) lib/ui/widgets.dart:13589— FlutterSwitchState's methods fall into 5 groups that share no field and call none of each other, against a bar of more than 3 for this run (LCOM4, configurable — your repository's bar is the one quoted here). Each group is a set of methods reachable from one another through shared fields or direct calls, so 5 groups means the type has that many internally-connected clusters with nothing tying them together. Types whose shape makes a high count expected — and which would otherwise dominate this list — are excluded before this row is raised, so this is a genuine split candidate rather than a metric reading. It is still a shape, not a defect: confirm the groups match responsibilities you can name before splitting.
Low cohesion: OpenAI (LCOM4 5) lib/utils/ai.dart:817— OpenAI's methods fall into 5 groups that share no field and call none of each other, against a bar of more than 3 for this run (LCOM4, configurable — your repository's bar is the one quoted here). Each group is a set of methods reachable from one another through shared fields or direct calls, so 5 groups means the type has that many internally-connected clusters with nothing tying them together. Types whose shape makes a high count expected — and which would otherwise dominate this list — are excluded before this row is raised, so this is a genuine split candidate rather than a metric reading. It is still a shape, not a defect: confirm the groups match responsibilities you can name before splitting.
Low cohesion: Gemini (LCOM4 4) lib/utils/ai.dart:758— Gemini's methods fall into 4 groups that share no field and call none of each other, against a bar of more than 3 for this run (LCOM4, configurable — your repository's bar is the one quoted here). Each group is a set of methods reachable from one another through shared fields or direct calls, so 4 groups means the type has that many internally-connected clusters with nothing tying them together. Types whose shape makes a high count expected — and which would otherwise dominate this list — are excluded before this row is raised, so this is a genuine split candidate rather than a metric reading. It is still a shape, not a defect: confirm the groups match responsibilities you can name before splitting.
Low cohesion: Claude (LCOM4 4) lib/utils/ai.dart:852— Claude's methods fall into 4 groups that share no field and call none of each other, against a bar of more than 3 for this run (LCOM4, configurable — your repository's bar is the one quoted here). Each group is a set of methods reachable from one another through shared fields or direct calls, so 4 groups means the type has that many internally-connected clusters with nothing tying them together. Types whose shape makes a high count expected — and which would otherwise dominate this list — are excluded before this row is raised, so this is a genuine split candidate rather than a metric reading. It is still a shape, not a defect: confirm the groups match responsibilities you can name before splitting.
Duplicated block (27 lines × 2) lib/ui/donation_page.dart:111— lib/ui/donation_page.dart:111-137 | lib/ui/donation_page.dart:164-190 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/donation_page.dart:111` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (27 lines × 2) lib/ui/downloads.dart:1594— lib/ui/downloads.dart:1594-1620 | lib/ui/downloads.dart:1888-1914 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/downloads.dart:1594` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (27 lines × 2) lib/ui/settings.dart:1155— lib/ui/settings.dart:1155-1181 | lib/ui/settings.dart:5148-5174 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:1155` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `lib/ui/settings.dart:5174` calls `circular` and `lib/ui/settings.dart:1181` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (27 lines × 2) lib/ui/widgets.dart:7992— lib/ui/widgets.dart:7992-8018 | lib/ui/widgets.dart:8110-8136 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:7992` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (18 lines × 2) lib/ui/settings.dart:1440— lib/ui/settings.dart:1440-1457 | lib/ui/settings.dart:5357-5374 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:1440` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (18 lines × 2) lib/ui/widgets.dart:11260— lib/ui/widgets.dart:11260-11277 | lib/ui/widgets.dart:11518-11535 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (18 lines × 2) lib/utils/agentic_tools.dart:1084— lib/utils/agentic_tools.dart:1084-1101 | lib/utils/agentic_tools.dart:1123-1140 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (18 lines × 2) lib/utils/copilot_chat.dart:969— lib/utils/copilot_chat.dart:969-986 | lib/utils/copilot_chat.dart:1071-1088 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/utils/copilot_chat.dart:969` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (10–11 lines × 2) lib/ui/downloads.dart:1287— lib/ui/downloads.dart:1287-1296 | lib/ui/start_screen.dart:316-326 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/downloads.dart:1287` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (10–11 lines × 2) lib/ui/project_screen.dart:241— lib/ui/project_screen.dart:241-251 | lib/ui/project_screen.dart:667-676 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/project_screen.dart:241` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (10–11 lines × 2) lib/ui/widgets.dart:7729— lib/ui/widgets.dart:7729-7739 | lib/ui/widgets.dart:7746-7755 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:7729` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (10–11 lines × 2) lib/utils/package_catalog.dart:388— lib/utils/package_catalog.dart:388-397 | lib/utils/package_catalog.dart:405-415 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/utils/package_catalog.dart:388` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Sync-over-async blocking lib/bloc/ui_bloc/ui_bloc.dart:1493— `startDownload` is async and calls createSync — a blocking call inside async code stalls the isolate's event loop — every other event, on Flutter the next frame, waits for as long as it runs.
Sync-over-async blocking lib/ui/start_screen.dart:90— `_initializeApp` is async and calls listSync, createSync, writeAsBytesSync — a blocking call inside async code stalls the isolate's event loop — every other event, on Flutter the next frame, waits for as long as it runs.
Sync-over-async blocking lib/utils/package_catalog.dart:382— `_loadInstalledCatalog` is async and calls listSync — a blocking call inside async code stalls the isolate's event loop — every other event, on Flutter the next frame, waits for as long as it runs.
Sync-over-async blocking lib/utils/proj_temps.dart:36— `generateContent` is async and calls createSync — a blocking call inside async code stalls the isolate's event loop — every other event, on Flutter the next frame, waits for as long as it runs.
D4 · Code Duplication· Edited copy of a member (14 corresponding lines) · ×3
Edited copy of a member (14 corresponding lines) lib/ui/file_manager.dart:444— lib/ui/file_manager.dart:444-457 | lib/ui/file_manager.dart:459-475 — These two members are one piece of code written twice and then edited apart: 14 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (14 corresponding lines) android/app/src/main/kotlin/com/roxum/MainActivity.kt:525— android/app/src/main/kotlin/com/roxum/MainActivity.kt:525-538 | android/app/src/main/kotlin/com/roxum/MainActivity.kt:696-709 — These two members are one piece of code written twice and then edited apart: 14 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (14 corresponding lines) lib/ui/downloads.dart:1032— lib/ui/downloads.dart:1032-1045 | lib/ui/downloads.dart:1188-1205 — These two members are one piece of code written twice and then edited apart: 14 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Duplicated block (20 lines × 2) lib/ui/downloads.dart:1220— lib/ui/downloads.dart:1220-1239 | lib/ui/start_screen.dart:248-267 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
Duplicated block (20 lines × 2) lib/ui/project_screen.dart:139— lib/ui/project_screen.dart:139-158 | lib/ui/project_screen.dart:543-562 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/project_screen.dart:139` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (20 lines × 2) lib/ui/widgets.dart:3775— lib/ui/widgets.dart:3775-3794 | lib/ui/widgets.dart:3826-3845 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:3775` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (15–16 lines × 2) lib/ui/downloads.dart:1441— lib/ui/downloads.dart:1441-1456 | lib/ui/downloads.dart:1729-1743 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/downloads.dart:1441` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (15–16 lines × 2) lib/ui/home.dart:865— lib/ui/home.dart:865-880 | lib/ui/project_screen.dart:219-233 — before extracting anything, compare `lib/ui/home.dart` and `lib/ui/project_screen.dart` as WHOLE FILES: this scan already matched 6 separate duplicated blocks between them, totalling at least 78 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/home.dart:865` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (15–16 lines × 2) lib/ui/widgets.dart:6532— lib/ui/widgets.dart:6532-6547 | lib/ui/widgets.dart:6579-6593 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:6532` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (15 lines × 2) lib/ui/settings.dart:498— lib/ui/settings.dart:498-512 | lib/ui/settings.dart:830-844 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:498` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (15 lines × 2) lib/ui/widgets.dart:4976— lib/ui/widgets.dart:4976-4990 | lib/ui/widgets.dart:6741-6755 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:4976` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (15 lines × 2) lib/ui/widgets.dart:10609— lib/ui/widgets.dart:10609-10623 | lib/utils/copilot_chat.dart:474-488 — before extracting anything, compare `lib/ui/widgets.dart` and `lib/utils/copilot_chat.dart` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 70 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (13–14 lines × 2) lib/ui/home.dart:1211— lib/ui/home.dart:1211-1223 | lib/ui/home.dart:1352-1365 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/home.dart:1211` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (13–14 lines × 2) lib/ui/settings.dart:4619— lib/ui/settings.dart:4619-4632 | lib/ui/settings.dart:4793-4805 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:4619` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (13–14 lines × 2) lib/ui/widgets.dart:8603— lib/ui/widgets.dart:8603-8616 | lib/ui/widgets.dart:8760-8772 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:8603` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (13 lines × 3) lib/ui/downloads.dart:1118— lib/ui/downloads.dart:1118-1130 | lib/ui/downloads.dart:1192-1204 | lib/ui/downloads.dart:1216-1228 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited.
Duplicated block (13 lines × 3) lib/ui/settings.dart:3021— lib/ui/settings.dart:3021-3033 | lib/ui/settings.dart:3137-3149 | lib/ui/settings.dart:3169-3181 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:3021` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (13 lines × 3) lib/ui/widgets.dart:11068— lib/ui/widgets.dart:11068-11080 | lib/utils/ai.dart:303-315 | lib/utils/ai.dart:618-630 — there are 3 copies across 2 file(s) — more copies than files, so at least one file holds the block twice. Extract it once into a single shared function every call site can reach and call it from all 3 sites; resolving a subset leaves the remainder to drift apart. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:11068` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12 lines × 2) lib/ui/widgets.dart:6481— lib/ui/widgets.dart:6481-6492 | lib/ui/widgets.dart:6606-6617 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:6481` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12 lines × 2) lib/ui/widgets.dart:8289— lib/ui/widgets.dart:8289-8300 | lib/ui/widgets.dart:9346-9357 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:8289` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12 lines × 2) lib/utils/functions.dart:3210— lib/utils/functions.dart:3210-3221 | lib/utils/functions.dart:3277-3288 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/utils/functions.dart:3210` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 2) lib/ui/settings.dart:901— lib/ui/settings.dart:901-908 | lib/ui/widgets.dart:13080-13087 — before extracting anything, compare `lib/ui/settings.dart` and `lib/ui/widgets.dart` as WHOLE FILES: this scan already matched 6 separate duplicated blocks between them, totalling at least 70 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:901` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 2) lib/ui/settings.dart:5464— lib/ui/settings.dart:5464-5471 | lib/ui/settings.dart:5504-5512 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:5464` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8 lines × 2) lib/ui/widgets.dart:10857— lib/ui/widgets.dart:10857-10864 | lib/utils/copilot_chat.dart:1047-1054 — before extracting anything, compare `lib/ui/widgets.dart` and `lib/utils/copilot_chat.dart` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 70 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place.
D4 · Code Duplication· Members sharing a duplicated core (4 members, 50+ identical tokens) · ×2
Members sharing a duplicated core (4 members, 50+ identical tokens) lib/ui/widgets.dart:1163— lib/ui/widgets.dart:1163-1176 | lib/ui/widgets.dart:1186-1199 | lib/ui/widgets.dart:9563-9576 | lib/ui/widgets.dart:9586-9599 — These 4 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 4 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 4 times.
Members sharing a duplicated core (4 members, 50+ identical tokens) lib/ui/widgets.dart:10974— lib/ui/widgets.dart:10974-11101 | lib/utils/ai.dart:256-338 | lib/utils/ai.dart:543-673 | lib/utils/copilot_chat.dart:565-1216 — These 4 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 4 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 4 times.
D4 · Code Duplication· Edited copy of a member (95 corresponding lines) · ×2
Edited copy of a member (95 corresponding lines) lib/ui/widgets.dart:1228— lib/ui/widgets.dart:1228-1352 | lib/ui/widgets.dart:9615-9709 — These two members are one piece of code written twice and then edited apart: 95 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (95 corresponding lines) lib/ui/widgets.dart:2954— lib/ui/widgets.dart:2954-3051 | lib/ui/widgets.dart:3074-3168 — These two members are one piece of code written twice and then edited apart: 95 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (19 corresponding lines) · ×2
Edited copy of a member (19 corresponding lines) lib/ui/downloads.dart:1281— lib/ui/downloads.dart:1281-1299 | lib/ui/start_screen.dart:308-328 — These two members are one piece of code written twice and then edited apart: 19 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (19 corresponding lines) lib/utils/functions.dart:3203— lib/utils/functions.dart:3203-3221 | lib/utils/functions.dart:3268-3288 — These two members are one piece of code written twice and then edited apart: 19 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (13 corresponding lines) · ×2
Edited copy of a member (13 corresponding lines) lib/ui/widgets.dart:1214— lib/ui/widgets.dart:1214-1226 | lib/ui/widgets.dart:9601-9613 — These two members are one piece of code written twice and then edited apart: 13 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (13 corresponding lines) lib/ui/widgets.dart:10569— lib/ui/widgets.dart:10569-10581 | lib/ui/widgets.dart:10583-10602 — These two members are one piece of code written twice and then edited apart: 13 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (20 corresponding lines) · ×2
Edited copy of a member (20 corresponding lines) lib/ui/widgets.dart:3053— lib/ui/widgets.dart:3053-3072 | lib/ui/widgets.dart:3170-3189 — These two members are one piece of code written twice and then edited apart: 20 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (20 corresponding lines) lib/utils/copilot_lsp.dart:525— lib/utils/copilot_lsp.dart:525-544 | lib/utils/copilot_lsp.dart:546-567 — These two members are one piece of code written twice and then edited apart: 20 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (17 corresponding lines) · ×2
Edited copy of a member (17 corresponding lines) lib/utils/ai.dart:237— lib/utils/ai.dart:237-254 | lib/utils/ai.dart:340-356 — These two members are one piece of code written twice and then edited apart: 17 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (17 corresponding lines) REDACTED:339— REDACTED:339-359 | lib/ui/settings.dart:171-187 — These two members are one piece of code written twice and then edited apart: 17 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (12 corresponding lines) · ×2
Edited copy of a member (12 corresponding lines) REDACTED:754— REDACTED:754-770 | lib/ui/widgets.dart:1201-1212 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (12 corresponding lines) lib/utils/functions.dart:2296— lib/utils/functions.dart:2296-2307 | lib/utils/functions.dart:2338-2357 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (16 corresponding lines) · ×2
Edited copy of a member (16 corresponding lines) lib/bloc/repo_bloc/repo_bloc.dart:328— lib/bloc/repo_bloc/repo_bloc.dart:328-343 | lib/ui/github_page.dart:888-903 — These two members are one piece of code written twice and then edited apart: 16 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (16 corresponding lines) lib/utils/copilot_lsp.dart:767— lib/utils/copilot_lsp.dart:767-784 | lib/utils/copilot_lsp.dart:786-801 — These two members are one piece of code written twice and then edited apart: 16 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (4 corresponding lines) · ×2
Edited copy of a member (4 corresponding lines) lib/ui/widgets.dart:10668— lib/ui/widgets.dart:10668-10671 | lib/utils/copilot_chat.dart:454-457 — These two members are one piece of code written twice and then edited apart: 4 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Edited copy of a member (4 corresponding lines) lib/ui/widgets.dart:10604— lib/ui/widgets.dart:10604-10607 | lib/utils/copilot_chat.dart:469-472 — These two members are one piece of code written twice and then edited apart: 4 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Duplicated block (24–25 lines × 2) REDACTED:3323— REDACTED:3323-3346 | lib/ui/home.dart:530-554 — before extracting anything, compare `REDACTED` and `lib/ui/home.dart` as WHOLE FILES: this scan already matched 6 separate duplicated blocks between them, totalling at least 148 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `REDACTED:3323` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (24–25 lines × 2) lib/ui/widgets.dart:8548— lib/ui/widgets.dart:8548-8572 | lib/ui/widgets.dart:8709-8732 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:8548` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (25 lines × 2) REDACTED:3377— REDACTED:3377-3401 | lib/ui/home.dart:585-609 — before extracting anything, compare `REDACTED` and `lib/ui/home.dart` as WHOLE FILES: this scan already matched 6 separate duplicated blocks between them, totalling at least 148 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `REDACTED:3377` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (25 lines × 2) lib/ui/home.dart:992— lib/ui/home.dart:992-1016 | lib/ui/home.dart:1108-1132 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/home.dart:992` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (24 lines × 2) lib/ui/widgets.dart:8049— lib/ui/widgets.dart:8049-8072 | lib/ui/widgets.dart:8197-8220 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:8049` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (24 lines × 2) lib/utils/package_catalog.dart:270— lib/utils/package_catalog.dart:270-293 | lib/utils/package_catalog.dart:307-330 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/utils/package_catalog.dart:270` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The `return` at the foot of the matched lines is the enclosing body's own terminal exit, not an early one: it moves with them unchanged, and each site calls the extracted unit from the position that `return` occupied — no decision has to be handed back and re-acted on.
Duplicated block (23 lines × 2) lib/ui/widgets.dart:5998— lib/ui/widgets.dart:5998-6020 | lib/ui/widgets.dart:7185-7207 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:5998` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (23 lines × 2) lib/ui/widgets.dart:8022— lib/ui/widgets.dart:8022-8044 | lib/ui/widgets.dart:8170-8192 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:8022` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (22 lines × 2) lib/ui/donation_page.dart:142— lib/ui/donation_page.dart:142-163 | lib/ui/donation_page.dart:197-218 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/donation_page.dart:142` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (22 lines × 2) lib/ui/widgets.dart:7957— lib/ui/widgets.dart:7957-7978 | lib/ui/widgets.dart:8075-8096 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:7957` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (21 lines × 2) REDACTED:3419— REDACTED:3419-3439 | lib/ui/home.dart:627-647 — before extracting anything, compare `REDACTED` and `lib/ui/home.dart` as WHOLE FILES: this scan already matched 6 separate duplicated blocks between them, totalling at least 148 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `REDACTED:3419` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (21 lines × 2) lib/ui/widgets.dart:5434— lib/ui/widgets.dart:5434-5454 | lib/ui/widgets.dart:5619-5639 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:5434` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (19 lines × 2) REDACTED:1684— REDACTED:1684-1702 | lib/ui/home.dart:139-157 — before extracting anything, compare `REDACTED` and `lib/ui/home.dart` as WHOLE FILES: this scan already matched 6 separate duplicated blocks between them, totalling at least 148 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
Duplicated block (19 lines × 2) lib/ui/settings.dart:4291— lib/ui/settings.dart:4291-4309 | lib/ui/settings.dart:4440-4458 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:4291` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (18 lines × 3) lib/ui/settings.dart:2761— lib/ui/settings.dart:2761-2778 | lib/ui/settings.dart:2977-2994 | lib/ui/settings.dart:3392-3409 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:2761` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (18 lines × 3) lib/ui/widgets.dart:5069— lib/ui/widgets.dart:5069-5086 | lib/ui/widgets.dart:6364-6381 | lib/ui/widgets.dart:6862-6879 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:5069` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (16–17 lines × 4) lib/ui/home.dart:774— lib/ui/home.dart:774-790 | lib/ui/home.dart:1199-1214 | lib/ui/project_screen.dart:149-164 | lib/ui/project_screen.dart:553-568 — before extracting anything, compare `lib/ui/home.dart` and `lib/ui/project_screen.dart` as WHOLE FILES: this scan already matched 6 separate duplicated blocks between them, totalling at least 78 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/home.dart:774` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (16–17 lines × 4) lib/ui/settings.dart:450— lib/ui/settings.dart:450-465 | lib/ui/settings.dart:767-783 | lib/ui/widgets.dart:7969-7984 | lib/ui/widgets.dart:8087-8102 — before extracting anything, compare `lib/ui/settings.dart` and `lib/ui/widgets.dart` as WHOLE FILES: this scan already matched 6 separate duplicated blocks between them, totalling at least 70 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:450` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (16 lines × 2) lib/ui/home.dart:1488— lib/ui/home.dart:1488-1503 | lib/ui/home.dart:1539-1554 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/home.dart:1488` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (16 lines × 2) lib/ui/settings.dart:1223— lib/ui/settings.dart:1223-1238 | lib/ui/settings.dart:1423-1438 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:1223` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (14–15 lines × 2) lib/ui/widgets.dart:2774— lib/ui/widgets.dart:2774-2788 | lib/ui/widgets.dart:2817-2830 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:2774` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (14–15 lines × 2) lib/ui/widgets.dart:6388— lib/ui/widgets.dart:6388-6401 | lib/ui/widgets.dart:6475-6489 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:6388` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (14 lines × 3) lib/ui/file_manager.dart:251— lib/ui/file_manager.dart:251-264 | lib/ui/file_manager.dart:887-900 | lib/ui/settings.dart:1009-1022 — before extracting anything, compare `lib/ui/file_manager.dart` and `lib/ui/settings.dart` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 39 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/file_manager.dart:251` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (14 lines × 3) lib/ui/project_screen.dart:333— lib/ui/project_screen.dart:333-346 | lib/ui/widgets.dart:4602-4615 | lib/ui/widgets.dart:4679-4692 — before extracting anything, compare `lib/ui/project_screen.dart` and `lib/ui/widgets.dart` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 36 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/project_screen.dart:333` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (12–13 lines × 7) lib/ui/file_manager.dart:249— lib/ui/file_manager.dart:249-261 | lib/ui/file_manager.dart:885-897 | lib/ui/settings.dart:448-460 | lib/ui/settings.dart:765-777 | lib/ui/settings.dart:1007-1019 | lib/ui/widgets.dart:7968-7979 | lib/ui/widgets.dart:8086-8097 — before extracting anything, compare `lib/ui/file_manager.dart` and `lib/ui/settings.dart` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 39 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/file_manager.dart:249` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `lib/ui/settings.dart:1005` calls `Color` and `lib/ui/file_manager.dart:248` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (12–13 lines × 7) lib/ui/file_manager.dart:246— lib/ui/file_manager.dart:246-258 | lib/ui/file_manager.dart:882-894 | lib/ui/home.dart:770-781 | lib/ui/home.dart:988-999 | lib/ui/home.dart:1104-1115 | lib/ui/home.dart:1195-1206 | lib/ui/home.dart:1333-1344 — there are 7 copies across 2 file(s) — more copies than files, so at least one file holds the block twice. Extract it once into a single shared function every call site can reach and call it from all 7 sites; resolving a subset leaves the remainder to drift apart. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/file_manager.dart:246` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12 lines × 3) lib/ui/settings.dart:2478— lib/ui/settings.dart:2478-2489 | lib/ui/settings.dart:2847-2858 | lib/ui/settings.dart:3263-3274 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:2478` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (12 lines × 3) lib/ui/widgets.dart:1394— lib/ui/widgets.dart:1394-1405 | lib/ui/widgets.dart:11704-11715 | lib/ui/widgets.dart:11803-11814 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited.
Duplicated block (11–12 lines × 2) lib/ui/settings.dart:3506— lib/ui/settings.dart:3506-3517 | lib/ui/settings.dart:3536-3546 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:3506` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (11–12 lines × 2) lib/ui/widgets.dart:11289— lib/ui/widgets.dart:11289-11300 | lib/ui/widgets.dart:11556-11566 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:11289` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (9–11 lines × 2) lib/ui/settings.dart:1311— lib/ui/settings.dart:1311-1319 | lib/ui/settings.dart:5236-5246 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (9–11 lines × 2) lib/utils/ai.dart:52— lib/utils/ai.dart:52-62 | lib/utils/ai.dart:71-79 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/utils/ai.dart:52` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (10 lines × 3) lib/ui/home.dart:1037— lib/ui/home.dart:1037-1046 | lib/ui/home.dart:1153-1162 | lib/ui/project_screen.dart:485-494 — before extracting anything, compare `lib/ui/home.dart` and `lib/ui/project_screen.dart` as WHOLE FILES: this scan already matched 6 separate duplicated blocks between them, totalling at least 78 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/home.dart:1037` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (10 lines × 3) lib/utils/copilot_lsp.dart:654— lib/utils/copilot_lsp.dart:654-663 | lib/utils/copilot_lsp.dart:675-684 | lib/utils/copilot_lsp.dart:691-700 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/utils/copilot_lsp.dart:654` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
No authorization lib/ui/webview.dart:34— This repository serves requests — an HTTP server (HttpServer.bind) (lib/ui/webview.dart:34) — and no route guard, auth-gate middleware, global guard or imperative check that refuses a caller (401/403, an Unauthorized/Forbidden error) was found: its endpoints may be unprotected.
_SettingsState.build (cyclomatic 241) lib/ui/settings.dart:2321— _SettingsState.build has cyclomatic complexity 241 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_EditorPageState.build (cyclomatic 208) REDACTED:1651— _EditorPageState.build has cyclomatic complexity 208 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
CopilotChat.chatWithModel (cyclomatic 118) lib/utils/copilot_chat.dart:565— CopilotChat.chatWithModel has cyclomatic complexity 118 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_HomeState.build (cyclomatic 78) lib/ui/home.dart:292— _HomeState.build has cyclomatic complexity 78 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_AIChatState._executeExternalToolCall (cyclomatic 58) lib/ui/widgets.dart:10682— _AIChatState._executeExternalToolCall has cyclomatic complexity 58 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_DownloadManagerState.build (cyclomatic 50) lib/ui/downloads.dart:1321— _DownloadManagerState.build has cyclomatic complexity 50 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_SettingsState._showModelDialog (cyclomatic 50) lib/ui/settings.dart:1091— _SettingsState._showModelDialog has cyclomatic complexity 50 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
Models._toGeminiContents (cyclomatic 47) lib/utils/ai.dart:543— Models._toGeminiContents has cyclomatic complexity 47 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_SourceControlState.build (cyclomatic 44) lib/ui/widgets.dart:8270— _SourceControlState.build has cyclomatic complexity 44 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_EditorPageState.build (cyclomatic 43) lib/ui/widgets.dart:1462— _EditorPageState.build has cyclomatic complexity 43 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_AIChatState._parseStreamChunk (cyclomatic 40) lib/ui/widgets.dart:11103— _AIChatState._parseStreamChunk has cyclomatic complexity 40 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
Models._toGeminiSchema (cyclomatic 38) lib/utils/ai.dart:358— Models._toGeminiSchema has cyclomatic complexity 38 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_AIChatState.build (cyclomatic 37) lib/ui/widgets.dart:11909— _AIChatState.build has cyclomatic complexity 37 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
_AIChatState._sendLocalLlamaPrompt (cyclomatic 35) lib/ui/widgets.dart:11620— _AIChatState._sendLocalLlamaPrompt has cyclomatic complexity 35 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
CopilotChat._extractReasoningDelta (cyclomatic 33) lib/utils/copilot_chat.dart:386— CopilotChat._extractReasoningDelta has cyclomatic complexity 33 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
APITesting.build (cyclomatic 31) lib/ui/widgets.dart:8962— APITesting.build has cyclomatic complexity 31 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
Models.parseToolCalls (cyclomatic 30) lib/utils/ai.dart:153— Models.parseToolCalls has cyclomatic complexity 30 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_DownloadManagerState._startDownload (cyclomatic 29) lib/ui/downloads.dart:375— _DownloadManagerState._startDownload has cyclomatic complexity 29 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_GgufDownloadManagerState._buildTaskTile (cyclomatic 28) lib/ui/widgets.dart:13295— _GgufDownloadManagerState._buildTaskTile has cyclomatic complexity 28 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_AIChatState._buildModelSelector (cyclomatic 27) lib/ui/widgets.dart:10015— _AIChatState._buildModelSelector has cyclomatic complexity 27 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_AIChatState._sendPrompt (cyclomatic 27) lib/ui/widgets.dart:11249— _AIChatState._sendPrompt has cyclomatic complexity 27 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_DownloadManagerState._startExtraction (cyclomatic 25) lib/ui/downloads.dart:852— _DownloadManagerState._startExtraction has cyclomatic complexity 25 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_ProjectScreenState.build (cyclomatic 25) lib/ui/project_screen.dart:362— _ProjectScreenState.build has cyclomatic complexity 25 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
Models._toAnthropicMessages (cyclomatic 25) lib/utils/ai.dart:256— Models._toAnthropicMessages has cyclomatic complexity 25 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
MainActivity.configureFlutterEngine (cyclomatic 25) android/app/src/main/kotlin/com/roxum/MainActivity.kt:71— MainActivity.configureFlutterEngine has cyclomatic complexity 25 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_SettingsState._showSSHDialog (cyclomatic 23) lib/ui/settings.dart:1569— _SettingsState._showSSHDialog has cyclomatic complexity 23 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_SettingsState._showCustomEditorThemeDialog (cyclomatic 23) lib/ui/settings.dart:1891— _SettingsState._showCustomEditorThemeDialog has cyclomatic complexity 23 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_AIChatState._sendExternalToolCallingPrompt (cyclomatic 21) lib/ui/widgets.dart:10974— _AIChatState._sendExternalToolCallingPrompt has cyclomatic complexity 21 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top. This is NOT this file's highest cyclomatic complexity: _SourceControlState._handleGitMenuAction (cyclomatic 22) is higher and carries no row of its own — it was excluded as a flat dispatcher (a long switch/match over independent cases: many branches, almost no nesting), which this dimension does not treat as a refactor obligation. It is named here so the ranking you see in this file is not mistaken for the whole of it; the excluded method is counted neither in this dimension's figures nor in its score.
_EditorPageState._openFileInTabs (cyclomatic 20) REDACTED:493— _EditorPageState._openFileInTabs has cyclomatic complexity 20 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_SourceControlState._generateCommitMessage (cyclomatic 20) lib/ui/widgets.dart:4442— _SourceControlState._generateCommitMessage has cyclomatic complexity 20 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top. This is NOT this file's highest cyclomatic complexity: _SourceControlState._handleGitMenuAction (cyclomatic 22) is higher and carries no row of its own — it was excluded as a flat dispatcher (a long switch/match over independent cases: many branches, almost no nesting), which this dimension does not treat as a refactor obligation. It is named here so the ranking you see in this file is not mistaken for the whole of it; the excluded method is counted neither in this dimension's figures nor in its score.
AgenticTools.gitStatus (cyclomatic 20) lib/utils/agentic_tools.dart:990— AgenticTools.gitStatus has cyclomatic complexity 20 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
Models.parseChatMessage (cyclomatic 20) lib/utils/ai.dart:105— Models.parseChatMessage has cyclomatic complexity 20 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
PendingEditFile.patchesToHunks (cyclomatic 20) lib/utils/functions.dart:2840— PendingEditFile.patchesToHunks has cyclomatic complexity 20 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_FindWordWidgetState._searchWorkspace (cyclomatic 19) lib/ui/widgets.dart:3424— _FindWordWidgetState._searchWorkspace has cyclomatic complexity 19 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top. This is NOT this file's highest cyclomatic complexity: _SourceControlState._handleGitMenuAction (cyclomatic 22) is higher and carries no row of its own — it was excluded as a flat dispatcher (a long switch/match over independent cases: many branches, almost no nesting), which this dimension does not treat as a refactor obligation. It is named here so the ranking you see in this file is not mistaken for the whole of it; the excluded method is counted neither in this dimension's figures nor in its score.
_SourceControlState._buildCommitButton (cyclomatic 19) lib/ui/widgets.dart:7682— _SourceControlState._buildCommitButton has cyclomatic complexity 19 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top. This is NOT this file's highest cyclomatic complexity: _SourceControlState._handleGitMenuAction (cyclomatic 22) is higher and carries no row of its own — it was excluded as a flat dispatcher (a long switch/match over independent cases: many branches, almost no nesting), which this dimension does not treat as a refactor obligation. It is named here so the ranking you see in this file is not mistaken for the whole of it; the excluded method is counted neither in this dimension's figures nor in its score.
_EditorPageState._goToMatchNearLine (cyclomatic 18) REDACTED:772— _EditorPageState._goToMatchNearLine has cyclomatic complexity 18 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
_DirectoryTreeViewerState._buildDirectoryTreeNode (cyclomatic 18) lib/ui/widgets.dart:2590— _DirectoryTreeViewerState._buildDirectoryTreeNode has cyclomatic complexity 18 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages. This is NOT this file's highest cyclomatic complexity: _SourceControlState._handleGitMenuAction (cyclomatic 22) is higher and carries no row of its own — it was excluded as a flat dispatcher (a long switch/match over independent cases: many branches, almost no nesting), which this dimension does not treat as a refactor obligation. It is named here so the ranking you see in this file is not mistaken for the whole of it; the excluded method is counted neither in this dimension's figures nor in its score.
_FindWordWidgetState._goToMatchNearLine (cyclomatic 18) lib/ui/widgets.dart:3357— _FindWordWidgetState._goToMatchNearLine has cyclomatic complexity 18 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages. This is NOT this file's highest cyclomatic complexity: _SourceControlState._handleGitMenuAction (cyclomatic 22) is higher and carries no row of its own — it was excluded as a flat dispatcher (a long switch/match over independent cases: many branches, almost no nesting), which this dimension does not treat as a refactor obligation. It is named here so the ranking you see in this file is not mistaken for the whole of it; the excluded method is counted neither in this dimension's figures nor in its score.
_FindWordWidgetState.build (cyclomatic 18) lib/ui/widgets.dart:3596— _FindWordWidgetState.build has cyclomatic complexity 18 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages. This is NOT this file's highest cyclomatic complexity: _SourceControlState._handleGitMenuAction (cyclomatic 22) is higher and carries no row of its own — it was excluded as a flat dispatcher (a long switch/match over independent cases: many branches, almost no nesting), which this dimension does not treat as a refactor obligation. It is named here so the ranking you see in this file is not mistaken for the whole of it; the excluded method is counted neither in this dimension's figures nor in its score.
_SourceControlState._buildGitActionsRow (cyclomatic 18) lib/ui/widgets.dart:7220— _SourceControlState._buildGitActionsRow has cyclomatic complexity 18 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top. This is NOT this file's highest cyclomatic complexity: _SourceControlState._handleGitMenuAction (cyclomatic 22) is higher and carries no row of its own — it was excluded as a flat dispatcher (a long switch/match over independent cases: many branches, almost no nesting), which this dimension does not treat as a refactor obligation. It is named here so the ranking you see in this file is not mistaken for the whole of it; the excluded method is counted neither in this dimension's figures nor in its score.
_AIChatState._buildAssistantResponseContent (cyclomatic 18) lib/ui/widgets.dart:10443— _AIChatState._buildAssistantResponseContent has cyclomatic complexity 18 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top. This is NOT this file's highest cyclomatic complexity: _SourceControlState._handleGitMenuAction (cyclomatic 22) is higher and carries no row of its own — it was excluded as a flat dispatcher (a long switch/match over independent cases: many branches, almost no nesting), which this dimension does not treat as a refactor obligation. It is named here so the ranking you see in this file is not mistaken for the whole of it; the excluded method is counted neither in this dimension's figures nor in its score.
_FileManagerPageState._hasExternalSourceMetadataSync (cyclomatic 17) lib/ui/file_manager.dart:163— _FileManagerPageState._hasExternalSourceMetadataSync has cyclomatic complexity 17 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_FileManagerPageState._downloadToStorage (cyclomatic 17) lib/ui/file_manager.dart:369— _FileManagerPageState._downloadToStorage has cyclomatic complexity 17 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
_StartScreenState._initializeApp (cyclomatic 17) lib/ui/start_screen.dart:90— _StartScreenState._initializeApp has cyclomatic complexity 17 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
InvertedIndex._scan (cyclomatic 17) lib/utils/functions.dart:3787— InvertedIndex._scan has cyclomatic complexity 17 (threshold 15). To reduce it, separate the branches: extract each independent case into its own named function so the top-level body reads as a short sequence of named decisions.
Models._toGeminiType (cyclomatic 16) lib/utils/ai.dart:502— Models._toGeminiType has cyclomatic complexity 16 (threshold 15). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Where every arm is uniform — the same kind of value, with no behaviour of its own — a table keyed by the case is the shorter form; wherever the arms carry different data or different behaviour, keep them as cases, because collapsing those trades an explicit, reviewable set of cases for nothing.
CopilotChat.loadAuthContext (cyclomatic 16) lib/utils/copilot_chat.dart:44— CopilotChat.loadAuthContext has cyclomatic complexity 16 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
Repeated repair: lib/main.dart lib/main.dart:89— lib/main.dart changed 4 times in last 90 days and 3 of those changes were fix/bug commits, so repair is the majority of this file's churn. Its max cyclomatic complexity is 5 (its worst body is _MainAppState.build at line 89), AT OR UNDER the 15 threshold, so this is deliberately not filed as a churn × complexity hotspot — the difficulty here is in the behaviour the file has to get right, not in its control flow, and refactoring it for complexity would be the wrong move. The repairs counted were: “## 2.10.0 - fix: [Feature request] Add a way to clear recent files/folders Fixes #36”; “2.8.0: - fix: Creating a project without defining a name bugs Fixes #56 - fix: The Spanish and Chinese READMEs are no longer being updated. Fixes #52 - fix: The items in the recent projects list are not centered. Fixes #53”; “FIX: The navigation bar Fixes #43, FIX: Terminal session ending immediately the view was changed Fixes #20, FEATURE: A feature suggestion. Fixes #42”. Each one is a case this code did not handle. Before the next change lands here, check that every one of them is pinned by a test that fails without its fix; where the same area keeps coming back, the durable fix is usually at the interface that keeps being misused rather than at the line that was last corrected. Counted over 2026-08-10..2026-11-08, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-10 14:55:24 +05:30' --until='2026-11-08 14:55:24 +05:30' --full-history --no-merges -- lib/main.dart`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
TodoComment REDACTED:3226— //TODO — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
_SettingsState.build (cognitive 459) lib/ui/settings.dart:2321— _SettingsState.build has cognitive complexity 459 (threshold 15). Drivers by points: if/else 120 (226 pts), ternaries 111 (209 pts), boolean chains 24 (nesting depth added 204). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
CopilotChat.chatWithModel (cognitive 391) lib/utils/copilot_chat.dart:565— CopilotChat.chatWithModel has cognitive complexity 391 (threshold 15). Drivers by points: if/else 46 (204 pts), ternaries 29 (139 pts), loops 5 (20 pts), boolean chains 13, error handling 3 (11 pts), match/switch 1 (4 pts) (nesting depth added 294). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
_EditorPageState.build (cognitive 246) REDACTED:1651— _EditorPageState.build has cognitive complexity 246 (threshold 15). Drivers by points: if/else 67 (99 pts), ternaries 61 (83 pts), boolean chains 45, loops 6 (11 pts), error handling 3 (4 pts), match/switch 3 (4 pts) (nesting depth added 61). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_SourceControlState.build (cognitive 193) lib/ui/widgets.dart:8270— _SourceControlState.build has cognitive complexity 193 (threshold 15). Drivers by points: if/else 19 (87 pts), error handling 8 (52 pts), ternaries 15 (44 pts), loops 1 (8 pts), boolean chains 2 (nesting depth added 148). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
Models._toGeminiContents (cognitive 106) lib/utils/ai.dart:543— Models._toGeminiContents has cognitive complexity 106 (threshold 15). Drivers by points: if/else 24 (71 pts), boolean chains 14, error handling 2 (9 pts), loops 4 (7 pts), ternaries 2 (5 pts) (nesting depth added 60). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_AIChatState._executeExternalToolCall (cognitive 101) lib/ui/widgets.dart:10682— _AIChatState._executeExternalToolCall has cognitive complexity 101 (threshold 15). Drivers by points: ternaries 25 (75 pts), if/else 9 (23 pts), match/switch 1 (2 pts), error handling 1 (nesting depth added 65). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_AIChatState._parseStreamChunk (cognitive 97) lib/ui/widgets.dart:11103— _AIChatState._parseStreamChunk has cognitive complexity 97 (threshold 15). Drivers by points: if/else 16 (63 pts), error handling 4 (16 pts), loops 4 (12 pts), boolean chains 4, match/switch 1, ternaries 1 (nesting depth added 67). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
_HomeState.build (cognitive 95) lib/ui/home.dart:292— _HomeState.build has cognitive complexity 95 (threshold 15). Drivers by points: if/else 34 (48 pts), ternaries 26 (36 pts), boolean chains 10, match/switch 1 (nesting depth added 24). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_SettingsState._showModelDialog (cognitive 95) lib/ui/settings.dart:1091— _SettingsState._showModelDialog has cognitive complexity 95 (threshold 15). Drivers by points: if/else 19 (47 pts), ternaries 22 (40 pts), boolean chains 8 (nesting depth added 46). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_AIChatState._sendLocalLlamaPrompt (cognitive 90) lib/ui/widgets.dart:11620— _AIChatState._sendLocalLlamaPrompt has cognitive complexity 90 (threshold 15). Drivers by points: if/else 20 (57 pts), error handling 4 (15 pts), loops 2 (9 pts), boolean chains 8, ternaries 1 (nesting depth added 55). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
_EditorPageState.build (cognitive 82) lib/ui/widgets.dart:1462— _EditorPageState.build has cognitive complexity 82 (threshold 15). Drivers by points: if/else 24 (53 pts), ternaries 12, boolean chains 8, loops 2 (8 pts), error handling 1 (nesting depth added 35). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_AIChatState._sendPrompt (cognitive 69) lib/ui/widgets.dart:11249— _AIChatState._sendPrompt has cognitive complexity 69 (threshold 15). Drivers by points: if/else 19 (60 pts), boolean chains 3, error handling 2 (3 pts), loops 1 (2 pts), ternaries 1 (nesting depth added 43). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
_DownloadManagerState.build (cognitive 67) lib/ui/downloads.dart:1321— _DownloadManagerState.build has cognitive complexity 67 (threshold 15). Drivers by points: if/else 33 (47 pts), boolean chains 12, ternaries 6 (8 pts) (nesting depth added 16). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
Models.parseToolCalls (cognitive 66) lib/utils/ai.dart:153— Models.parseToolCalls has cognitive complexity 66 (threshold 15). Drivers by points: if/else 8 (29 pts), ternaries 4 (16 pts), boolean chains 8, error handling 3 (6 pts), loops 2 (6 pts), match/switch 1 (nesting depth added 40). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
CopilotChat._extractReasoningDelta (cognitive 61) lib/utils/copilot_chat.dart:386— CopilotChat._extractReasoningDelta has cognitive complexity 61 (threshold 15). Drivers by points: if/else 21 (48 pts), boolean chains 10, loops 1 (3 pts) (nesting depth added 29). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
AgenticTools.searchInFiles (cognitive 56) lib/utils/agentic_tools.dart:798— AgenticTools.searchInFiles has cognitive complexity 56 (threshold 15). Drivers by points: if/else 9 (43 pts), loops 2 (8 pts), error handling 2 (5 pts) (nesting depth added 43). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
Models._toAnthropicMessages (cognitive 54) lib/utils/ai.dart:256— Models._toAnthropicMessages has cognitive complexity 54 (threshold 15). Drivers by points: if/else 13 (37 pts), boolean chains 8, error handling 1 (5 pts), loops 2 (4 pts) (nesting depth added 30). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_AIChatState._sendExternalToolCallingPrompt (cognitive 52) lib/ui/widgets.dart:10974— _AIChatState._sendExternalToolCallingPrompt has cognitive complexity 52 (threshold 15). Drivers by points: if/else 14 (39 pts), error handling 1 (5 pts), loops 2 (5 pts), boolean chains 2, ternaries 1 (nesting depth added 32). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
Models.parseChatMessage (cognitive 51) lib/utils/ai.dart:105— Models.parseChatMessage has cognitive complexity 51 (threshold 15). Drivers by points: if/else 8 (36 pts), error handling 3 (6 pts), loops 2 (6 pts), boolean chains 2, match/switch 1 (nesting depth added 35). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
Models._toGeminiSchema (cognitive 51) lib/utils/ai.dart:358— Models._toGeminiSchema has cognitive complexity 51 (threshold 15). Drivers by points: if/else 27 (40 pts), boolean chains 5, loops 4 (5 pts), ternaries 1 (nesting depth added 14). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_GgufDownloadManagerState._buildTaskTile (cognitive 49) lib/ui/widgets.dart:13295— _GgufDownloadManagerState._buildTaskTile has cognitive complexity 49 (threshold 15). Drivers by points: if/else 16 (33 pts), ternaries 8 (11 pts), boolean chains 3, error handling 1 (2 pts) (nesting depth added 21). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_DownloadManagerState._startDownload (cognitive 46) lib/ui/downloads.dart:375— _DownloadManagerState._startDownload has cognitive complexity 46 (threshold 15). Drivers by points: if/else 21 (37 pts), boolean chains 5, ternaries 2 (4 pts) (nesting depth added 18). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_AIChatState._buildModelSelector (cognitive 42) lib/ui/widgets.dart:10015— _AIChatState._buildModelSelector has cognitive complexity 42 (threshold 15). Drivers by points: if/else 11 (18 pts), ternaries 9 (16 pts), boolean chains 4, loops 3 (4 pts) (nesting depth added 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_AIChatState.build (cognitive 42) lib/ui/widgets.dart:11909— _AIChatState.build has cognitive complexity 42 (threshold 15). Drivers by points: if/else 18 (22 pts), boolean chains 13, ternaries 7 (nesting depth added 4). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.
_AIChatState._buildAssistantResponseContent (cognitive 38) lib/ui/widgets.dart:10443— _AIChatState._buildAssistantResponseContent has cognitive complexity 38 (threshold 15). Drivers by points: if/else 15 (34 pts), error handling 1 (3 pts), loops 1 (nesting depth added 21). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
AgenticTools.gitStatus (cognitive 38) lib/utils/agentic_tools.dart:990— AgenticTools.gitStatus has cognitive complexity 38 (threshold 15). Drivers by points: if/else 9 (25 pts), boolean chains 7, ternaries 1 (3 pts), loops 1 (2 pts), error handling 1 (nesting depth added 19). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_DownloadManagerState._startExtraction (cognitive 37) lib/ui/downloads.dart:852— _DownloadManagerState._startExtraction has cognitive complexity 37 (threshold 15). Drivers by points: if/else 13 (26 pts), boolean chains 10, error handling 1 (nesting depth added 13). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_SettingsState._showCustomEditorThemeDialog (cognitive 37) lib/ui/settings.dart:1891— _SettingsState._showCustomEditorThemeDialog has cognitive complexity 37 (threshold 15). Drivers by points: ternaries 9 (17 pts), if/else 7 (14 pts), boolean chains 5, error handling 1 (nesting depth added 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_ProjectScreenState.build (cognitive 36) lib/ui/project_screen.dart:362— _ProjectScreenState.build has cognitive complexity 36 (threshold 15). Drivers by points: if/else 14 (23 pts), boolean chains 5, ternaries 4 (5 pts), error handling 1 (3 pts) (nesting depth added 12). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_SettingsState._showSSHDialog (cognitive 36) lib/ui/settings.dart:1569— _SettingsState._showSSHDialog has cognitive complexity 36 (threshold 15). Drivers by points: if/else 16 (25 pts), ternaries 5 (8 pts), boolean chains 3 (nesting depth added 12). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_FindWordWidgetState._searchWorkspace (cognitive 36) lib/ui/widgets.dart:3424— _FindWordWidgetState._searchWorkspace has cognitive complexity 36 (threshold 15). Drivers by points: if/else 8 (17 pts), loops 2 (8 pts), boolean chains 6, error handling 2 (5 pts) (nesting depth added 18). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
APITesting.build (cognitive 36) lib/ui/widgets.dart:8962— APITesting.build has cognitive complexity 36 (threshold 15). Drivers by points: if/else 12 (14 pts), ternaries 13, loops 4 (6 pts), boolean chains 3 (nesting depth added 4). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.
PendingEditFile.patchesToHunks (cognitive 36) lib/utils/functions.dart:2840— PendingEditFile.patchesToHunks has cognitive complexity 36 (threshold 15). Drivers by points: if/else 6 (16 pts), ternaries 6 (12 pts), boolean chains 5, loops 2 (3 pts) (nesting depth added 17). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
AgenticTools.grepInFiles (cognitive 35) lib/utils/agentic_tools.dart:734— AgenticTools.grepInFiles has cognitive complexity 35 (threshold 15). Drivers by points: if/else 6 (22 pts), loops 2 (6 pts), error handling 2 (4 pts), ternaries 1 (2 pts), boolean chains 1 (nesting depth added 23). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_FileManagerPageState._downloadToStorage (cognitive 34) lib/ui/file_manager.dart:369— _FileManagerPageState._downloadToStorage has cognitive complexity 34 (threshold 15). Drivers by points: if/else 10 (21 pts), error handling 3 (8 pts), boolean chains 3, ternaries 1 (2 pts) (nesting depth added 17). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
MainActivity.configureFlutterEngine (cognitive 33) android/app/src/main/kotlin/com/roxum/MainActivity.kt:71— MainActivity.configureFlutterEngine has cognitive complexity 33 (threshold 15). Drivers by points: if/else 13 (22 pts), error handling 3 (6 pts), match/switch 3, boolean chains 2 (nesting depth added 12). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
AgenticTools.renamePath (cognitive 30) lib/utils/agentic_tools.dart:435— AgenticTools.renamePath has cognitive complexity 30 (threshold 15). Drivers by points: if/else 8 (18 pts), ternaries 1 (5 pts), boolean chains 3, loops 1 (3 pts), error handling 1 (nesting depth added 16). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_SourceControlState._buildGitActionsRow (cognitive 29) lib/ui/widgets.dart:7220— _SourceControlState._buildGitActionsRow has cognitive complexity 29 (threshold 15). Drivers by points: if/else 8 (16 pts), ternaries 9 (12 pts), boolean chains 1 (nesting depth added 11). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
InvertedIndex._scan (cognitive 29) lib/utils/functions.dart:3787— InvertedIndex._scan has cognitive complexity 29 (threshold 15). Drivers by points: if/else 5 (11 pts), loops 3 (8 pts), boolean chains 6, error handling 2 (4 pts) (nesting depth added 13). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_EditorPageState._openFileInTabs (cognitive 27) REDACTED:493— _EditorPageState._openFileInTabs has cognitive complexity 27 (threshold 15). Drivers by points: if/else 11 (18 pts), boolean chains 6, loops 2 (3 pts) (nesting depth added 8). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_EditorPageState._requestExternalModelCompletion (cognitive 27) lib/ui/widgets.dart:1354— _EditorPageState._requestExternalModelCompletion has cognitive complexity 27 (threshold 15). Drivers by points: if/else 9 (21 pts), loops 1 (3 pts), boolean chains 2, error handling 1 (nesting depth added 14). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
_SourceControlState._loadCommitDiffContext (cognitive 27) lib/ui/widgets.dart:4222— _SourceControlState._loadCommitDiffContext has cognitive complexity 27 (threshold 15). Drivers by points: if/else 7 (17 pts), loops 2 (6 pts), error handling 1 (3 pts), ternaries 1 (nesting depth added 16). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
AgenticTools.globSearchFiles (cognitive 27) lib/utils/agentic_tools.dart:683— AgenticTools.globSearchFiles has cognitive complexity 27 (threshold 15). Drivers by points: if/else 7 (20 pts), loops 2 (5 pts), boolean chains 1, error handling 1 (nesting depth added 16). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
CopilotChat.loadAuthContext (cognitive 27) lib/utils/copilot_chat.dart:44— CopilotChat.loadAuthContext has cognitive complexity 27 (threshold 15). Drivers by points: if/else 8 (20 pts), boolean chains 6, error handling 1 (nesting depth added 12). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_StartScreenState._initializeApp (cognitive 26) lib/ui/start_screen.dart:90— _StartScreenState._initializeApp has cognitive complexity 26 (threshold 15). Drivers by points: if/else 12 (19 pts), error handling 1 (3 pts), loops 2 (3 pts), boolean chains 1 (nesting depth added 10). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_SourceControlState._generateCommitMessage (cognitive 26) lib/ui/widgets.dart:4442— _SourceControlState._generateCommitMessage has cognitive complexity 26 (threshold 15). Drivers by points: if/else 10 (17 pts), boolean chains 8, error handling 1 (nesting depth added 7). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_SourceControlState._buildCommitButton (cognitive 26) lib/ui/widgets.dart:7682— _SourceControlState._buildCommitButton has cognitive complexity 26 (threshold 15). Drivers by points: ternaries 7 (12 pts), if/else 6 (8 pts), boolean chains 6 (nesting depth added 7). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
CopilotChat._loadCopilotOauthTokenFromConfigFiles (cognitive 26) lib/utils/copilot_chat.dart:160— CopilotChat._loadCopilotOauthTokenFromConfigFiles has cognitive complexity 26 (threshold 15). Drivers by points: if/else 5 (18 pts), loops 2 (4 pts), boolean chains 2, error handling 1 (2 pts) (nesting depth added 16). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_SourceControlState._performPull (cognitive 25) lib/ui/widgets.dart:4767— _SourceControlState._performPull has cognitive complexity 25 (threshold 15). Drivers by points: if/else 6 (13 pts), ternaries 2 (10 pts), boolean chains 1, error handling 1 (nesting depth added 15). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
AgenticTools.rejectPendingEditHunk (cognitive 25) lib/utils/agentic_tools.dart:1257— AgenticTools.rejectPendingEditHunk has cognitive complexity 25 (threshold 15). Drivers by points: if/else 10 (21 pts), loops 1 (2 pts), boolean chains 1, error handling 1 (nesting depth added 12). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_FileManagerPageState._hasExternalSourceMetadataSync (cognitive 24) lib/ui/file_manager.dart:163— _FileManagerPageState._hasExternalSourceMetadataSync has cognitive complexity 24 (threshold 15). Drivers by points: if/else 11 (18 pts), boolean chains 2, ternaries 2, error handling 1, loops 1 (nesting depth added 7). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_AIChatState._sendCopilotChatPrompt (cognitive 24) lib/ui/widgets.dart:11500— _AIChatState._sendCopilotChatPrompt has cognitive complexity 24 (threshold 15). Drivers by points: if/else 10 (20 pts), ternaries 1 (2 pts), boolean chains 1, error handling 1 (nesting depth added 11). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
VSCodeGitGraphPainter.paint (cognitive 24) lib/ui/widgets.dart:12636— VSCodeGitGraphPainter.paint has cognitive complexity 24 (threshold 15). Drivers by points: if/else 13 (19 pts), loops 2, ternaries 1 (2 pts), boolean chains 1 (nesting depth added 7). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_FindWordWidgetState._replaceInWorkspace (cognitive 23) lib/ui/widgets.dart:3519— _FindWordWidgetState._replaceInWorkspace has cognitive complexity 23 (threshold 15). Drivers by points: if/else 8 (15 pts), error handling 2 (6 pts), boolean chains 1, loops 1 (nesting depth added 11). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_AIChatState._generateTitle (cognitive 23) lib/ui/widgets.dart:11421— _AIChatState._generateTitle has cognitive complexity 23 (threshold 15). Drivers by points: if/else 5 (12 pts), error handling 3 (6 pts), match/switch 1 (2 pts), ternaries 1 (2 pts), boolean chains 1 (nesting depth added 12). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_DirectoryTreeViewerState._buildDirectoryTreeNode (cognitive 22) lib/ui/widgets.dart:2590— _DirectoryTreeViewerState._buildDirectoryTreeNode has cognitive complexity 22 (threshold 15). Drivers by points: if/else 8 (11 pts), ternaries 5, boolean chains 4, loops 1 (2 pts) (nesting depth added 4). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.
_FindWordWidgetState.build (cognitive 22) lib/ui/widgets.dart:3596— _FindWordWidgetState.build has cognitive complexity 22 (threshold 15). Drivers by points: if/else 10 (11 pts), ternaries 8 (10 pts), boolean chains 1 (nesting depth added 3). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.
AgenticTools.writeFile (cognitive 22) lib/utils/agentic_tools.dart:313— AgenticTools.writeFile has cognitive complexity 22 (threshold 15). Drivers by points: if/else 7 (16 pts), ternaries 1 (3 pts), boolean chains 2, error handling 1 (nesting depth added 11). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
PendingEditFile.toDecorationRanges (cognitive 22) lib/utils/functions.dart:2936— PendingEditFile.toDecorationRanges has cognitive complexity 22 (threshold 15). Drivers by points: if/else 6 (11 pts), ternaries 3 (10 pts), loops 1 (nesting depth added 12). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
AIChatUIBloc._restoreSelectedModelIdFromPrefs (cognitive 21) lib/bloc/ui_bloc/ui_bloc.dart:404— AIChatUIBloc._restoreSelectedModelIdFromPrefs has cognitive complexity 21 (threshold 15). Drivers by points: if/else 6 (16 pts), boolean chains 4, error handling 1 (nesting depth added 10). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_EditorPageState._goToMatchNearLine (cognitive 21) REDACTED:772— _EditorPageState._goToMatchNearLine has cognitive complexity 21 (threshold 15). Drivers by points: if/else 8 (10 pts), loops 5 (7 pts), boolean chains 2, ternaries 2 (nesting depth added 4). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition.
_FindWordWidgetState._goToMatchNearLine (cognitive 21) lib/ui/widgets.dart:3357— _FindWordWidgetState._goToMatchNearLine has cognitive complexity 21 (threshold 15). Drivers by points: if/else 8 (10 pts), loops 5 (7 pts), boolean chains 2, ternaries 2 (nesting depth added 4). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition.
AgenticTools.insertAtLine (cognitive 21) lib/utils/agentic_tools.dart:508— AgenticTools.insertAtLine has cognitive complexity 21 (threshold 15). Drivers by points: if/else 8 (17 pts), ternaries 1 (2 pts), boolean chains 1, error handling 1 (nesting depth added 10). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
AgenticTools.openLinks (cognitive 21) lib/utils/agentic_tools.dart:1380— AgenticTools.openLinks has cognitive complexity 21 (threshold 15). Drivers by points: if/else 9 (16 pts), boolean chains 4, error handling 1 (nesting depth added 7). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
AgenticTools._extractLinks (cognitive 21) lib/utils/agentic_tools.dart:1688— AgenticTools._extractLinks has cognitive complexity 21 (threshold 15). Drivers by points: if/else 9 (17 pts), boolean chains 2, loops 2 (nesting depth added 8). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
ActiveEditorBloc.ActiveEditorBloc (cognitive 20) lib/bloc/ui_bloc/ui_bloc.dart:209— ActiveEditorBloc.ActiveEditorBloc has cognitive complexity 20 (threshold 15). Drivers by points: if/else 5 (12 pts), ternaries 2 (4 pts), boolean chains 3, loops 1 (nesting depth added 9). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
AgenticTools.getLspDiagnostics (cognitive 20) lib/utils/agentic_tools.dart:72— AgenticTools.getLspDiagnostics has cognitive complexity 20 (threshold 15). Drivers by points: ternaries 3 (7 pts), if/else 3 (6 pts), loops 2 (5 pts), boolean chains 1, error handling 1 (nesting depth added 10). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
AgenticTools.replaceAllInFile (cognitive 20) lib/utils/agentic_tools.dart:564— AgenticTools.replaceAllInFile has cognitive complexity 20 (threshold 15). Drivers by points: if/else 6 (12 pts), ternaries 2 (4 pts), loops 1 (2 pts), boolean chains 1, error handling 1 (nesting depth added 9). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
AgenticTools.readFilesBatch (cognitive 20) lib/utils/agentic_tools.dart:633— AgenticTools.readFilesBatch has cognitive complexity 20 (threshold 15). Drivers by points: if/else 4 (10 pts), ternaries 2 (6 pts), loops 1 (2 pts), boolean chains 1, error handling 1 (nesting depth added 11). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
AgenticTools.editFile (cognitive 20) lib/utils/agentic_tools.dart:872— AgenticTools.editFile has cognitive complexity 20 (threshold 15). Drivers by points: if/else 9 (18 pts), boolean chains 1, error handling 1 (nesting depth added 9). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_GithubPageState._buildSignInPage (cognitive 19) lib/ui/github_page.dart:334— _GithubPageState._buildSignInPage has cognitive complexity 19 (threshold 15). Drivers by points: if/else 6 (12 pts), ternaries 7 (nesting depth added 6). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_AIChatState._buildToolTerminal (cognitive 19) lib/ui/widgets.dart:10316— _AIChatState._buildToolTerminal has cognitive complexity 19 (threshold 15). Drivers by points: boolean chains 8, if/else 5 (8 pts), ternaries 2 (3 pts) (nesting depth added 4). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_DownloadManagerState._ensurePfdFeatureInstalled (cognitive 18) lib/ui/downloads.dart:763— _DownloadManagerState._ensurePfdFeatureInstalled has cognitive complexity 18 (threshold 15). Drivers by points: if/else 10 (14 pts), boolean chains 2, error handling 1, ternaries 1 (nesting depth added 4). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_SettingsState._buildSignInDialogContent (cognitive 18) lib/ui/settings.dart:572— _SettingsState._buildSignInDialogContent has cognitive complexity 18 (threshold 15). Drivers by points: ternaries 6 (12 pts), if/else 4 (5 pts), boolean chains 1 (nesting depth added 7). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_CodeEditorState.initState (cognitive 18) lib/ui/widgets.dart:381— _CodeEditorState.initState has cognitive complexity 18 (threshold 15). Drivers by points: if/else 6 (8 pts), boolean chains 5, error handling 3 (5 pts) (nesting depth added 4). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
AgenticTools._extractMainContent (cognitive 18) lib/utils/agentic_tools.dart:1593— AgenticTools._extractMainContent has cognitive complexity 18 (threshold 15). Drivers by points: if/else 6 (11 pts), loops 3 (5 pts), boolean chains 2 (nesting depth added 7). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
PackageCatalogService._loadInstalledCatalog (cognitive 18) lib/utils/package_catalog.dart:382— PackageCatalogService._loadInstalledCatalog has cognitive complexity 18 (threshold 15). Drivers by points: if/else 4 (8 pts), error handling 2 (6 pts), loops 2 (4 pts) (nesting depth added 10). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
CopilotBloc._onInitialize (cognitive 17) lib/bloc/ui_bloc/ui_bloc.dart:808— CopilotBloc._onInitialize has cognitive complexity 17 (threshold 15). Drivers by points: if/else 9 (13 pts), boolean chains 3, error handling 1 (nesting depth added 4). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_SetupTerminalState._setTerminalOutputWithAutocomplete (cognitive 17) lib/terminal/terminal.dart:1005— _SetupTerminalState._setTerminalOutputWithAutocomplete has cognitive complexity 17 (threshold 15). Drivers by points: if/else 9 (12 pts), boolean chains 5 (nesting depth added 3). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_HomeState._openPendingSharedFile (cognitive 17) lib/ui/home.dart:63— _HomeState._openPendingSharedFile has cognitive complexity 17 (threshold 15). Drivers by points: if/else 8 (17 pts) (nesting depth added 9). To reduce it, flatten the nesting: this score is depth rather than breadth — most of its points come from checks stacked inside one another, so the work sits several levels in. Invert each enclosing check into an early exit (a return, or the language's equivalent) so the happy path stays at one level, and where a level cannot be exited early, lift the block it encloses into its own named function.
AgenticTools.gitLog (cognitive 17) lib/utils/agentic_tools.dart:1109— AgenticTools.gitLog has cognitive complexity 17 (threshold 15). Drivers by points: if/else 4 (10 pts), ternaries 1 (3 pts), loops 1 (2 pts), boolean chains 1, error handling 1 (nesting depth added 9). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
Models.buildToolCallingRequest (cognitive 17) lib/utils/ai.dart:45— Models.buildToolCallingRequest has cognitive complexity 17 (threshold 15). Drivers by points: if/else 8 (16 pts), match/switch 1 (nesting depth added 8). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
RepoStatusBloc._onLoad (cognitive 16) lib/bloc/repo_bloc/repo_bloc.dart:96— RepoStatusBloc._onLoad has cognitive complexity 16 (threshold 15). Drivers by points: if/else 4 (6 pts), ternaries 3 (6 pts), error handling 2 (3 pts), boolean chains 1 (nesting depth added 6). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_EditorPageState._openVitePreview (cognitive 16) REDACTED:256— _EditorPageState._openVitePreview has cognitive complexity 16 (threshold 15). Drivers by points: if/else 7 (12 pts), ternaries 1 (2 pts), boolean chains 1, error handling 1 (nesting depth added 6). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_FileManagerPageState._readSourceMetadata (cognitive 16) lib/ui/file_manager.dart:119— _FileManagerPageState._readSourceMetadata has cognitive complexity 16 (threshold 15). Drivers by points: if/else 7 (12 pts), ternaries 2, error handling 1, loops 1 (nesting depth added 5). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
_HomeState._performClone (cognitive 16) lib/ui/home.dart:166— _HomeState._performClone has cognitive complexity 16 (threshold 15). Drivers by points: if/else 6 (12 pts), ternaries 1 (3 pts), error handling 1 (nesting depth added 8). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D4 · Code Duplication· Near-duplicate member family (11 members, 73 shared lines) · ×1
Near-duplicate member family (11 members, 73 shared lines) lib/ui/widgets.dart:4932— lib/ui/widgets.dart:4932-5086 | lib/ui/widgets.dart:5088-5291 | lib/ui/widgets.dart:5293-5476 | lib/ui/widgets.dart:5478-5661 | lib/ui/widgets.dart:5663-5861 | lib/ui/widgets.dart:5863-6031 | lib/ui/widgets.dart:6033-6196 | lib/ui/widgets.dart:6218-6381 | lib/ui/widgets.dart:6696-6879 | lib/ui/widgets.dart:6881-7046 | lib/ui/widgets.dart:7048-7218 — These 11 members are variants of one another: a block of 73 lines reported below appears in every one of them, and the pairwise near-duplicate rows they would otherwise produce are collapsed into this row. Read them as one construct written 11 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 11 times.
Near-duplicate member pair (62 shared lines) lib/ui/settings.dart:404— lib/ui/settings.dart:404-525 | lib/ui/settings.dart:746-986 — These two members are variants of one another: 62 of their lines are already reported as duplicated blocks below, spread through both bodies rather than gathered into one. Read them as a single construct written twice. The repair is at the members' grain — factor the shared pipeline into one implementation the two call with their differences as parameters or as an injected step, or, where the difference is systematic (sync against async, one transport against another), generate one from the other. Extracting the individual blocks below is not the same fix: it leaves the two bodies in place and the next edit still has to be made twice.
Near-duplicate member pair (40 shared lines) lib/ui/widgets.dart:11249— lib/ui/widgets.dart:11249-11419 | lib/ui/widgets.dart:11500-11606 — These two members are variants of one another: 40 of their lines are already reported as duplicated blocks below, spread through both bodies rather than gathered into one. Read them as a single construct written twice. The repair is at the members' grain — factor the shared pipeline into one implementation the two call with their differences as parameters or as an injected step, or, where the difference is systematic (sync against async, one transport against another), generate one from the other. Extracting the individual blocks below is not the same fix: it leaves the two bodies in place and the next edit still has to be made twice.
D4 · Code Duplication· Members sharing a duplicated core (5 members, 50+ identical tokens) · ×1
Members sharing a duplicated core (5 members, 50+ identical tokens) lib/ui/home.dart:292— lib/ui/home.dart:292-1837 | lib/ui/project_screen.dart:137-275 | lib/ui/project_screen.dart:362-753 | lib/ui/widgets.dart:7956-8072 | lib/ui/widgets.dart:8074-8220 — These 5 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 5 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 5 times.
D4 · Code Duplication· Edited copy of a member (99 corresponding lines) · ×1
Edited copy of a member (99 corresponding lines) lib/ui/file_manager.dart:227— lib/ui/file_manager.dart:227-325 | lib/ui/file_manager.dart:866-979 — These two members are one piece of code written twice and then edited apart: 99 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (79 corresponding lines) · ×1
Edited copy of a member (79 corresponding lines) lib/ui/widgets.dart:6383— lib/ui/widgets.dart:6383-6470 | lib/ui/widgets.dart:6472-6550 — These two members are one piece of code written twice and then edited apart: 79 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (84 corresponding lines) · ×1
Edited copy of a member (84 corresponding lines) lib/ui/project_screen.dart:277— lib/ui/project_screen.dart:277-360 | lib/ui/widgets.dart:4534-4638 — These two members are one piece of code written twice and then edited apart: 84 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copies of one member (3 members, 42+ corresponding lines) · ×1
Edited copies of one member (3 members, 42+ corresponding lines) lib/ui/project_screen.dart:89— lib/ui/project_screen.dart:89-135 | lib/ui/settings.dart:291-333 | lib/ui/settings.dart:335-376 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 42 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication· Edited copy of a member (37 corresponding lines) · ×1
Edited copy of a member (37 corresponding lines) lib/ui/widgets.dart:4818— lib/ui/widgets.dart:4818-4854 | lib/ui/widgets.dart:4856-4892 — These two members are one piece of code written twice and then edited apart: 37 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (41 corresponding lines) · ×1
Edited copy of a member (41 corresponding lines) lib/ui/widgets.dart:2769— lib/ui/widgets.dart:2769-2810 | lib/ui/widgets.dart:2812-2852 — These two members are one piece of code written twice and then edited apart: 41 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (45 corresponding lines) · ×1
Edited copy of a member (45 corresponding lines) lib/ui/downloads.dart:942— lib/ui/downloads.dart:942-992 | lib/ui/downloads.dart:1104-1148 — These two members are one piece of code written twice and then edited apart: 45 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (30 corresponding lines) · ×1
Edited copy of a member (30 corresponding lines) lib/ui/widgets.dart:488— lib/ui/widgets.dart:488-521 | lib/ui/widgets.dart:523-552 — These two members are one piece of code written twice and then edited apart: 30 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (26 corresponding lines) · ×1
Edited copy of a member (26 corresponding lines) lib/utils/agentic_tools.dart:408— lib/utils/agentic_tools.dart:408-433 | lib/utils/agentic_tools.dart:1324-1355 — These two members are one piece of code written twice and then edited apart: 26 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (33 corresponding lines) · ×1
Edited copy of a member (33 corresponding lines) lib/utils/package_catalog.dart:269— lib/utils/package_catalog.dart:269-301 | lib/utils/package_catalog.dart:303-338 — These two members are one piece of code written twice and then edited apart: 33 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (22 corresponding lines) · ×1
Edited copy of a member (22 corresponding lines) lib/ui/github_page.dart:58— lib/ui/github_page.dart:58-79 | lib/ui/github_page.dart:81-102 — These two members are one piece of code written twice and then edited apart: 22 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (24 corresponding lines) · ×1
Edited copy of a member (24 corresponding lines) lib/utils/agentic_tools.dart:1184— lib/utils/agentic_tools.dart:1184-1207 | lib/utils/agentic_tools.dart:1209-1236 — These two members are one piece of code written twice and then edited apart: 24 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (15 corresponding lines) · ×1
Edited copy of a member (15 corresponding lines) lib/utils/copilot_lsp.dart:674— lib/utils/copilot_lsp.dart:674-688 | lib/utils/copilot_lsp.dart:690-704 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copy of a member (21 corresponding lines) · ×1
Edited copy of a member (21 corresponding lines) lib/ui/widgets.dart:8222— lib/ui/widgets.dart:8222-8246 | lib/ui/widgets.dart:8248-8268 — These two members are one piece of code written twice and then edited apart: 21 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copies of one member (3 members, 11+ corresponding lines) · ×1
Edited copies of one member (3 members, 11+ corresponding lines) lib/ui/widgets.dart:6198— lib/ui/widgets.dart:6198-6214 | lib/ui/widgets.dart:7658-7668 | lib/ui/widgets.dart:7670-7680 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 11 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication· Edited copies of one member (4 members, 9+ corresponding lines) · ×1
Edited copies of one member (4 members, 9+ corresponding lines) lib/bloc/ui_bloc/ui_bloc.dart:1562— lib/bloc/ui_bloc/ui_bloc.dart:1562-1570 | lib/bloc/ui_bloc/ui_bloc.dart:1572-1584 | lib/bloc/ui_bloc/ui_bloc.dart:1586-1594 | lib/bloc/ui_bloc/ui_bloc.dart:1630-1638 — These 4 members are one piece of code written 4 times and then edited apart: every two of them correspond over at least 9 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 4 times and the copies will drift further apart.
D4 · Code Duplication· Edited copy of a member (10 corresponding lines) · ×1
Edited copy of a member (10 corresponding lines) lib/ui/widgets.dart:1142— lib/ui/widgets.dart:1142-1151 | lib/ui/widgets.dart:9539-9553 — These two members are one piece of code written twice and then edited apart: 10 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication· Edited copies of one member (4 members, 7+ corresponding lines) · ×1
Edited copies of one member (4 members, 7+ corresponding lines) lib/ui/widgets.dart:1153— lib/ui/widgets.dart:1153-1161 | lib/ui/widgets.dart:1178-1184 | lib/ui/widgets.dart:9555-9561 | lib/ui/widgets.dart:9578-9584 — These 4 members are one piece of code written 4 times and then edited apart: every two of them correspond over at least 7 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 4 times and the copies will drift further apart.
D4 · Code Duplication· Edited copy of a member (6 corresponding lines) · ×1
Edited copy of a member (6 corresponding lines) lib/ui/contribute.dart:13— lib/ui/contribute.dart:13-18 | lib/ui/donation_page.dart:13-18 — These two members are one piece of code written twice and then edited apart: 6 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
Duplicated block (66 lines × 2) REDACTED:772— REDACTED:772-837 | lib/ui/widgets.dart:3357-3422 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (64–65 lines × 2) lib/ui/widgets.dart:2957— lib/ui/widgets.dart:2957-3021 | lib/ui/widgets.dart:3075-3138 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:2957` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note first that the copies are not typed on the same thing: the declarations holding them bind `context` to `BuildContext` in one and `context` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (62–64 lines × 2) lib/ui/settings.dart:1349— lib/ui/settings.dart:1349-1412 | lib/ui/settings.dart:5268-5329 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:1349` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (62–63 lines × 2) lib/ui/downloads.dart:1513— lib/ui/downloads.dart:1513-1575 | lib/ui/downloads.dart:1807-1868 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/downloads.dart:1513` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (39 lines × 3) REDACTED:375— REDACTED:375-413 | REDACTED:2249-2287 | lib/ui/home.dart:1770-1808 — before extracting anything, compare `REDACTED` and `lib/ui/home.dart` as WHOLE FILES: this scan already matched 6 separate duplicated blocks between them, totalling at least 148 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `REDACTED:375` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (38–39 lines × 2) lib/ui/settings.dart:1616— lib/ui/settings.dart:1616-1653 | lib/ui/settings.dart:3660-3698 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:1616` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (38 lines × 2) lib/ui/widgets.dart:10629— lib/ui/widgets.dart:10629-10666 | lib/utils/copilot_chat.dart:494-531 — before extracting anything, compare `lib/ui/widgets.dart` and `lib/utils/copilot_chat.dart` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 70 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (35–37 lines × 2) lib/ui/downloads.dart:1458— lib/ui/downloads.dart:1458-1494 | lib/ui/downloads.dart:1745-1779 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/downloads.dart:1458` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (33–34 lines × 2) lib/ui/downloads.dart:1653— lib/ui/downloads.dart:1653-1686 | lib/ui/downloads.dart:1937-1969 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/downloads.dart:1653` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (31–33 lines × 8) lib/ui/widgets.dart:5150— lib/ui/widgets.dart:5150-5182 | lib/ui/widgets.dart:5364-5396 | lib/ui/widgets.dart:5549-5581 | lib/ui/widgets.dart:5722-5754 | lib/ui/widgets.dart:5925-5956 | lib/ui/widgets.dart:6094-6124 | lib/ui/widgets.dart:6943-6975 | lib/ui/widgets.dart:7110-7142 — all 8 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:5150` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `lib/ui/widgets.dart:5397` calls `where` and `lib/ui/widgets.dart:5183` does not — after which the two agree again for 4 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (31–33 lines × 2) lib/ui/home.dart:1027— lib/ui/home.dart:1027-1059 | lib/ui/home.dart:1143-1173 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/home.dart:1027` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (32–33 lines × 2) lib/ui/settings.dart:1121— lib/ui/settings.dart:1121-1153 | lib/ui/settings.dart:5116-5147 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:1121` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (32 lines × 11) lib/ui/widgets.dart:4938— lib/ui/widgets.dart:4938-4969 | lib/ui/widgets.dart:5099-5130 | lib/ui/widgets.dart:5304-5335 | lib/ui/widgets.dart:5489-5520 | lib/ui/widgets.dart:5671-5702 | lib/ui/widgets.dart:5874-5905 | lib/ui/widgets.dart:6043-6074 | lib/ui/widgets.dart:6228-6259 | lib/ui/widgets.dart:6703-6734 | lib/ui/widgets.dart:6892-6923 | lib/ui/widgets.dart:7059-7090 — all 11 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:4938` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (29 lines × 2) lib/ui/widgets.dart:3023— lib/ui/widgets.dart:3023-3051 | lib/ui/widgets.dart:3140-3168 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:3023` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (26–27 lines × 6) lib/ui/widgets.dart:4994— lib/ui/widgets.dart:4994-5020 | lib/ui/widgets.dart:5195-5221 | lib/ui/widgets.dart:5770-5796 | lib/ui/widgets.dart:6289-6315 | lib/ui/widgets.dart:6759-6784 | lib/ui/widgets.dart:6787-6813 — all 6 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:4994` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (26 lines × 4) lib/ui/settings.dart:1750— lib/ui/settings.dart:1750-1775 | lib/ui/settings.dart:3759-3784 | lib/ui/settings.dart:4018-4043 | lib/ui/settings.dart:4332-4357 — all 4 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:1750` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `lib/ui/settings.dart:1776` calls `pop` and `lib/ui/settings.dart:4044` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (24–26 lines × 3) lib/ui/widgets.dart:6406— lib/ui/widgets.dart:6406-6429 | lib/ui/widgets.dart:6494-6517 | lib/ui/widgets.dart:6624-6649 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:6406` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (26 lines × 2) lib/ui/file_manager.dart:234— lib/ui/file_manager.dart:234-259 | lib/ui/file_manager.dart:870-895 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/file_manager.dart:234` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (23–25 lines × 11) lib/ui/widgets.dart:5018— lib/ui/widgets.dart:5018-5042 | lib/ui/widgets.dart:5219-5243 | lib/ui/widgets.dart:5406-5429 | lib/ui/widgets.dart:5591-5614 | lib/ui/widgets.dart:5794-5818 | lib/ui/widgets.dart:5966-5989 | lib/ui/widgets.dart:6133-6155 | lib/ui/widgets.dart:6313-6337 | lib/ui/widgets.dart:6811-6835 | lib/ui/widgets.dart:6984-7007 | lib/ui/widgets.dart:7151-7174 — all 11 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:5018` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (25 lines × 3) lib/ui/project_screen.dart:111— lib/ui/project_screen.dart:111-135 | lib/ui/settings.dart:309-333 | lib/ui/settings.dart:352-376 — there are 3 copies across 2 file(s) — more copies than files, so at least one file holds the block twice. Extract it once into a single shared function every call site can reach and call it from all 3 sites; resolving a subset leaves the remainder to drift apart. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/project_screen.dart:111` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (22–25 lines × 2) lib/ui/widgets.dart:8576— lib/ui/widgets.dart:8576-8600 | lib/ui/widgets.dart:8737-8758 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:8576` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (23–25 lines × 2) lib/utils/copilot_chat.dart:629— lib/utils/copilot_chat.dart:629-653 | lib/utils/copilot_chat.dart:694-716 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/utils/copilot_chat.dart:629` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (23 lines × 3) lib/ui/settings.dart:436— lib/ui/settings.dart:436-458 | lib/ui/settings.dart:753-775 | lib/ui/settings.dart:995-1017 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:436` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
Duplicated block (19–23 lines × 2) lib/ui/settings.dart:1321— lib/ui/settings.dart:1321-1343 | lib/ui/settings.dart:5247-5265 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:1321` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (20–22 lines × 2) lib/ui/widgets.dart:9138— lib/ui/widgets.dart:9138-9159 | lib/ui/widgets.dart:9242-9261 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:9138` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (21 lines × 5) lib/ui/home.dart:761— lib/ui/home.dart:761-781 | lib/ui/home.dart:979-999 | lib/ui/home.dart:1095-1115 | lib/ui/home.dart:1186-1206 | lib/ui/home.dart:1324-1344 — all 5 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/home.dart:761` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (18–21 lines × 4) lib/ui/widgets.dart:6006— lib/ui/widgets.dart:6006-6026 | lib/ui/widgets.dart:6174-6191 | lib/ui/widgets.dart:7024-7041 | lib/ui/widgets.dart:7193-7213 — all 4 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:6006` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (18–20 lines × 2) lib/ui/widgets.dart:9163— lib/ui/widgets.dart:9163-9182 | lib/ui/widgets.dart:9264-9281 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:9163` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (18–19 lines × 14) lib/ui/widgets.dart:5000— lib/ui/widgets.dart:5000-5018 | lib/ui/widgets.dart:5163-5181 | lib/ui/widgets.dart:5201-5219 | lib/ui/widgets.dart:5377-5395 | lib/ui/widgets.dart:5562-5580 | lib/ui/widgets.dart:5735-5753 | lib/ui/widgets.dart:5776-5794 | lib/ui/widgets.dart:5938-5955 | lib/ui/widgets.dart:6107-6124 | lib/ui/widgets.dart:6295-6313 | lib/ui/widgets.dart:6765-6782 | lib/ui/widgets.dart:6793-6811 | lib/ui/widgets.dart:6956-6974 | lib/ui/widgets.dart:7123-7141 — all 14 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:5000` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `lib/ui/widgets.dart:5397` calls `where` and `lib/ui/widgets.dart:5183` does not — after which the two agree again for 3 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (19 lines × 8) lib/ui/widgets.dart:5273— lib/ui/widgets.dart:5273-5291 | lib/ui/widgets.dart:5458-5476 | lib/ui/widgets.dart:5643-5661 | lib/ui/widgets.dart:5843-5861 | lib/ui/widgets.dart:6013-6031 | lib/ui/widgets.dart:6178-6196 | lib/ui/widgets.dart:7028-7046 | lib/ui/widgets.dart:7200-7218 — all 8 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:5273` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (18–19 lines × 2) REDACTED:3348— REDACTED:3348-3366 | lib/ui/home.dart:556-573 — before extracting anything, compare `REDACTED` and `lib/ui/home.dart` as WHOLE FILES: this scan already matched 6 separate duplicated blocks between them, totalling at least 148 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `REDACTED:3348` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (17–18 lines × 2) REDACTED:3207— REDACTED:3207-3223 | REDACTED:3406-3423 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `REDACTED:3406` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (26–27 lines × 2) lib/ui/widgets.dart:11701— lib/ui/widgets.dart:11701-11726 | lib/ui/widgets.dart:11800-11826 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:11701` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (17 lines × 10) lib/ui/widgets.dart:5068— lib/ui/widgets.dart:5068-5084 | lib/ui/widgets.dart:5272-5288 | lib/ui/widgets.dart:5457-5473 | lib/ui/widgets.dart:5642-5658 | lib/ui/widgets.dart:6012-6028 | lib/ui/widgets.dart:6177-6193 | lib/ui/widgets.dart:6363-6379 | lib/ui/widgets.dart:6861-6877 | lib/ui/widgets.dart:7027-7043 | lib/ui/widgets.dart:7199-7215 — all 10 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:5068` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (17 lines × 3) lib/ui/widgets.dart:5254— lib/ui/widgets.dart:5254-5270 | lib/ui/widgets.dart:5439-5455 | lib/ui/widgets.dart:5624-5640 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:5254` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `lib/ui/widgets.dart:5438` calls `pop` and `lib/ui/widgets.dart:5253` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (16 lines × 4) lib/ui/widgets.dart:5825— lib/ui/widgets.dart:5825-5840 | lib/ui/widgets.dart:5995-6010 | lib/ui/widgets.dart:6346-6361 | lib/ui/widgets.dart:6844-6859 — all 4 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:5825` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `lib/ui/widgets.dart:5824` calls `trim` and `lib/ui/widgets.dart:5994` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (15–16 lines × 4) lib/ui/widgets.dart:9140— lib/ui/widgets.dart:9140-9155 | lib/ui/widgets.dart:9165-9180 | lib/ui/widgets.dart:9243-9257 | lib/ui/widgets.dart:9265-9279 — all 4 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:9140` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (13–15 lines × 5) lib/ui/widgets.dart:2403— lib/ui/widgets.dart:2403-2417 | lib/ui/widgets.dart:2427-2439 | lib/ui/widgets.dart:2456-2469 | lib/ui/widgets.dart:2478-2491 | lib/ui/widgets.dart:2536-2549 — all 5 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:2403` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (13–15 lines × 2) lib/ui/widgets.dart:8619— lib/ui/widgets.dart:8619-8633 | lib/ui/widgets.dart:8774-8786 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:8619` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (14 lines × 5) lib/ui/widgets.dart:5827— lib/ui/widgets.dart:5827-5840 | lib/ui/widgets.dart:5997-6010 | lib/ui/widgets.dart:6348-6361 | lib/ui/widgets.dart:6846-6859 | lib/ui/widgets.dart:7184-7197 — all 5 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:5827` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `lib/ui/widgets.dart:5824` calls `trim` and `lib/ui/widgets.dart:5994` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (13–14 lines × 4) lib/ui/home.dart:854— lib/ui/home.dart:854-866 | lib/ui/home.dart:1286-1299 | lib/ui/widgets.dart:8017-8029 | lib/ui/widgets.dart:8165-8177 — there are 4 copies across 2 file(s) — more copies than files, so at least one file holds the block twice. Extract it once into a single shared function every call site can reach and call it from all 4 sites; resolving a subset leaves the remainder to drift apart. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/home.dart:854` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (11–14 lines × 2) REDACTED:343— REDACTED:343-356 | lib/ui/settings.dart:174-184 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `REDACTED:343` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (27–28 lines × 2) lib/ui/project_screen.dart:197— lib/ui/project_screen.dart:197-223 | lib/ui/project_screen.dart:605-632 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/project_screen.dart:197` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
Duplicated block (12–13 lines × 6) lib/ui/home.dart:772— lib/ui/home.dart:772-784 | lib/ui/home.dart:990-1002 | lib/ui/home.dart:1106-1118 | lib/ui/home.dart:1197-1209 | lib/ui/project_screen.dart:148-159 | lib/ui/project_screen.dart:552-563 — before extracting anything, compare `lib/ui/home.dart` and `lib/ui/project_screen.dart` as WHOLE FILES: this scan already matched 6 separate duplicated blocks between them, totalling at least 78 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/home.dart:772` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `lib/ui/home.dart:785` calls `Row` and `lib/ui/home.dart:1003` does not — after which the two agree again for 3 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (12–13 lines × 3) lib/utils/agentic_tools.dart:942— lib/utils/agentic_tools.dart:942-954 | lib/utils/agentic_tools.dart:1225-1236 | lib/utils/agentic_tools.dart:1311-1322 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/utils/agentic_tools.dart:942` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (12–13 lines × 2) lib/ui/menu_screen.dart:14— lib/ui/menu_screen.dart:14-26 | lib/ui/menu_screen.dart:66-77 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/menu_screen.dart:14` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (12 lines × 16) lib/ui/file_manager.dart:249— lib/ui/file_manager.dart:249-260 | lib/ui/file_manager.dart:885-896 | lib/ui/settings.dart:448-459 | lib/ui/settings.dart:765-776 | lib/ui/settings.dart:1007-1018 | lib/ui/widgets.dart:4951-4962 | lib/ui/widgets.dart:5112-5123 | lib/ui/widgets.dart:5317-5328 | lib/ui/widgets.dart:5502-5513 | lib/ui/widgets.dart:5684-5695 | lib/ui/widgets.dart:5887-5898 | lib/ui/widgets.dart:6056-6067 | lib/ui/widgets.dart:6241-6252 | lib/ui/widgets.dart:6716-6727 | lib/ui/widgets.dart:6905-6916 | lib/ui/widgets.dart:7072-7083 — before extracting anything, compare `lib/ui/file_manager.dart` and `lib/ui/settings.dart` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 39 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/file_manager.dart:249` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `lib/ui/settings.dart:1005` calls `Color` and `lib/ui/file_manager.dart:248` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (12 lines × 8) lib/ui/settings.dart:2363— lib/ui/settings.dart:2363-2374 | lib/ui/settings.dart:3012-3023 | lib/ui/settings.dart:3044-3055 | lib/ui/settings.dart:3128-3139 | lib/ui/settings.dart:3160-3171 | lib/ui/settings.dart:5715-5726 | lib/ui/settings.dart:5755-5766 | lib/ui/settings.dart:5891-5902 — all 8 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited.
Duplicated block (12 lines × 4) lib/ui/settings.dart:1330— lib/ui/settings.dart:1330-1343 | lib/ui/settings.dart:1370-1384 | lib/ui/settings.dart:5254-5265 | lib/ui/settings.dart:5286-5300 — all 4 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:1330` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (11–12 lines × 3) lib/ui/settings.dart:1222— lib/ui/settings.dart:1222-1232 | lib/ui/settings.dart:1294-1304 | lib/ui/settings.dart:1421-1432 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:1421` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `lib/ui/settings.dart:1433` calls `Name` and `lib/ui/settings.dart:1305` does not — after which the two agree again for 4 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (9–11 lines × 4) lib/ui/project_screen.dart:148— lib/ui/project_screen.dart:148-156 | lib/ui/project_screen.dart:552-560 | lib/ui/widgets.dart:7966-7976 | lib/ui/widgets.dart:8084-8094 — before extracting anything, compare `lib/ui/project_screen.dart` and `lib/ui/widgets.dart` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 36 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/project_screen.dart:148` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (4–10 lines × 6) lib/ui/widgets.dart:11315— lib/ui/widgets.dart:11315-11324 | lib/ui/widgets.dart:11403-11406 | lib/ui/widgets.dart:11407-11414 | lib/ui/widgets.dart:11593-11602 | lib/ui/widgets.dart:11729-11738 | lib/ui/widgets.dart:11871-11880 — all 6 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:11315` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `lib/ui/widgets.dart:11415` calls `close` and `lib/ui/widgets.dart:11325` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (9–10 lines × 4) lib/ui/project_screen.dart:241— lib/ui/project_screen.dart:241-250 | lib/ui/project_screen.dart:434-442 | lib/ui/project_screen.dart:667-676 | lib/ui/project_screen.dart:697-705 — all 4 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/project_screen.dart:241` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (10 lines × 4) lib/ui/widgets.dart:1167— lib/ui/widgets.dart:1167-1176 | lib/ui/widgets.dart:1190-1199 | lib/ui/widgets.dart:9567-9576 | lib/ui/widgets.dart:9590-9599 — all 4 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:1167` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8–10 lines × 2) REDACTED:2837— REDACTED:2837-2846 | REDACTED:2849-2856 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `REDACTED:2837` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (9 lines × 6) lib/ui/home.dart:853— lib/ui/home.dart:853-863 | lib/ui/home.dart:1285-1295 | lib/ui/project_screen.dart:209-217 | lib/ui/project_screen.dart:618-626 | lib/ui/widgets.dart:8016-8026 | lib/ui/widgets.dart:8164-8174 — before extracting anything, compare `lib/ui/home.dart` and `lib/ui/project_screen.dart` as WHOLE FILES: this scan already matched 6 separate duplicated blocks between them, totalling at least 78 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/home.dart:853` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately. Note first that the copies are not typed on the same thing: the declarations holding them bind `context` to `context` in one and `BuildContext` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
Duplicated block (8–9 lines × 4) lib/ui/widgets.dart:11067— lib/ui/widgets.dart:11067-11074 | lib/utils/ai.dart:302-309 | lib/utils/ai.dart:617-624 | lib/utils/copilot_chat.dart:795-803 — before extracting anything, compare `lib/ui/widgets.dart` and `lib/utils/copilot_chat.dart` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 70 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:11067` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (9 lines × 3) lib/ui/settings.dart:1519— lib/ui/settings.dart:1519-1527 | lib/ui/settings.dart:5667-5675 | lib/ui/widgets.dart:13471-13479 — before extracting anything, compare `lib/ui/settings.dart` and `lib/ui/widgets.dart` as WHOLE FILES: this scan already matched 6 separate duplicated blocks between them, totalling at least 70 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/settings.dart:1519` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (8–9 lines × 2) lib/ui/widgets.dart:11296— lib/ui/widgets.dart:11296-11304 | lib/ui/widgets.dart:11382-11389 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:11296` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (7–8 lines × 2) lib/ui/github_page.dart:731— lib/ui/github_page.dart:731-737 | lib/ui/project_screen.dart:315-322 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/project_screen.dart:315` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (7 lines × 3) lib/ui/widgets.dart:10272— lib/ui/widgets.dart:10272-10278 | lib/ui/widgets.dart:10332-10338 | lib/ui/widgets.dart:10403-10409 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `lib/ui/widgets.dart:10271` calls `symmetric` and `lib/ui/widgets.dart:10402` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
Duplicated block (6–7 lines × 3) lib/utils/ai.dart:289— lib/utils/ai.dart:289-295 | lib/utils/ai.dart:551-556 | lib/utils/ai.dart:607-612 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (6–7 lines × 2) lib/ui/widgets.dart:1377— lib/ui/widgets.dart:1377-1383 | lib/ui/widgets.dart:11635-11640 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:1377` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (6 lines × 3) lib/ui/widgets.dart:11260— lib/ui/widgets.dart:11260-11267 | lib/ui/widgets.dart:11518-11525 | lib/ui/widgets.dart:11654-11659 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited.
Duplicated block (5 lines × 4) lib/ui/widgets.dart:11295— lib/ui/widgets.dart:11295-11300 | lib/ui/widgets.dart:11348-11354 | lib/ui/widgets.dart:11381-11385 | lib/ui/widgets.dart:11561-11567 — all 4 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `lib/ui/widgets.dart:11295` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Off the main sequence: :app — :app: abstractness 0.00, instability 0.00, distance 1.00 — an application entry point, so it is concrete by design — the distance is expected; what is worth checking is that other projects depend on it at all, since a host should be a leaf of the graph.
X13 · Undrained process stream· Redirected process stream is never drained (deadlock) · ×1
Redirected process stream is never drained (deadlock) lib/utils/functions.dart:351— `Process.start` always pipes both `stdout` and `stderr`, and here `process.stderr` is read while the child's end is awaited — but nothing in this scope ever reads `process.stdout`. Dart reads a process stream only while something listens to it, and the API's own documentation says every byte of both must be read: once the child writes more than the pipe holds to stdout (measured with Dart 3.12 on Linux: 60 KB hangs every time, and less on a box short of pipe pages), it blocks on the write, never exits, and the `exitCode` or end of stream this code awaits never comes. Nothing fails loudly: the future never completes and the stuck child holds its resources until something kills it. Consume both streams (`process.stdout.drain<void>()` to discard it, or listen to it), use `Process.run`, which collects both, or start it with `mode: ProcessStartMode.inheritStdio` when the output is not wanted.
Duplicated predicate lib/bloc/ui_bloc/ui_bloc.dart:1033— `!state.isEnabled || state.status != CopilotStatus.signedIn` appears character-identically in 2 files — lib/bloc/ui_bloc/ui_bloc.dart, lib/ui/widgets.dart. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate REDACTED:351— `copilotBloc.state.isInitialized || copilotBloc.state.status == CopilotStatus.initializing` appears character-identically in 2 files — REDACTED, lib/ui/settings.dart. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate lib/ui/widgets.dart:11058— `functionName == null || functionName.isEmpty` appears character-identically in 3 files — lib/ui/widgets.dart, lib/utils/ai.dart, lib/utils/copilot_chat.dart. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate REDACTED:819— `matchStart >= targetCharOffset && matchStart <= targetLineEnd` appears character-identically in 2 files — REDACTED, lib/ui/widgets.dart. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate lib/bloc/ui_bloc/ui_bloc.dart:1141— `normalized.endsWith('/') && normalized.length > 1` appears character-identically in 2 files — lib/bloc/ui_bloc/ui_bloc.dart, lib/utils/copilot_chat.dart. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate lib/bloc/ui_bloc/ui_bloc.dart:920— `payload.isOk || payload.isAlreadySignedIn` appears character-identically in 2 files — lib/bloc/ui_bloc/ui_bloc.dart, lib/utils/copilot_lsp.dart. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate REDACTED:763— `pending == null || pending.editHunks.isEmpty` appears character-identically in 2 files — REDACTED, lib/ui/widgets.dart. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate lib/ui/widgets.dart:11067— `rawArgs is String && rawArgs.trim().isNotEmpty` appears character-identically in 3 files — lib/ui/widgets.dart, lib/utils/ai.dart, lib/utils/copilot_chat.dart. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate REDACTED:1684— `rawEntry is Map && rawEntry['type'] is String && rawEntry['path'] is String` appears character-identically in 3 files — REDACTED, lib/ui/home.dart, lib/utils/functions.dart. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Duplicated predicate lib/terminal/terminal.dart:1517— `termuxInfo != null && termuxInfo!.isConnected` appears character-identically in 2 files — lib/terminal/terminal.dart, REDACTED. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
Silent fallback default in catch lib/ui/project_screen.dart:78— `_getExistingProjects` turns every thrown error into `[]` — a data error becomes a silent behavior change with no trail. Log the error or rethrow it. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment at the `catch` or in the `///` doc, and the row stops firing.
Silent fallback default in catch lib/utils/ai.dart:122— `parseChatMessage` turns every thrown error into `''` — a data error becomes a silent behavior change with no trail. Log the error or rethrow it. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment at the `catch` or in the `///` doc, and the row stops firing.
Silent fallback default in catch lib/utils/ai.dart:179— `parseToolCalls` turns every thrown error into `[]` — a data error becomes a silent behavior change with no trail. Log the error or rethrow it. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment at the `catch` or in the `///` doc, and the row stops firing.
Silent fallback default in catch lib/utils/functions.dart:3026— `_decodePrefs` turns every thrown error into `{}` — a data error becomes a silent behavior change with no trail. Log the error or rethrow it. If that constant is the correct answer rather than a stand-in for a value that could not be read, say so in a comment at the `catch` or in the `///` doc, and the row stops firing.
Fat interface: AppLocalizations (126 abstract methods) lib/l10n/app_localizations.dart:16— `AppLocalizations` declares 126 abstract methods: `appTitle`, `aboutRoxum`, `aboutDeveloper`, `getInTouch`, `versionLabel`, `aboutDescription`, `developerIntro`, `start`, `settings`, `contributeSourceCode`, `buyMeACoffee`, `privacyPolicy`, `fileManager`, `runtimes`, `appTheme`, `github`, `builtInTerminal`, `openFile`, `openFolder`, `openRepository`, `openTemplate`, `projects`, `recent`, `noRecentActivity`, `projectNotFound`, `fileNotFound`, `newFileTitle`, `newProject`, `projectTemplates`, `yourProjects`, `createNewFile`, `createNewProject`, `openExistingProject`, `enterRepositoryUrl`, `creatingProject`, `cloningRepository`, `cloningMayTakeTime`, `failedToOpenFile`, `selectedFileCouldNotBeOpened`, `failedToOpenFolder`, and 86 more. Counted over its public methods with no body, once per name; concrete methods and `_`-private members are not counted, because no implementer that extends it is forced to write them. A wide interface forces every implementer and caller to depend on methods they don't use (the Interface-Segregation 'I' in SOLID). Split it into focused role-interfaces.
No ADRs found lib/main.dart:14— No ADRs found. No recognised ADR directory (`docs/adr/`, `docs/decisions/`, `adr/`, `docs/rfcs/`, an `ADR0001/` folder, or their siblings) exists anywhere in this tree. What was searched, so you can tell an empty log from a search that missed one: every directory under the tree (build output, dependencies and VCS metadata excepted), for a document that is either any non-index page inside a recognised ADR directory, whatever its name and however deeply nested (`docs/adr/use-postgres.md`, `docs/adr/2024/0001-x.md`); or a file anywhere whose name is ADR-shaped (`0001-use-postgres.md`, `adr-012-caching.md`); or, when neither turned anything up, a document carrying the decision-record signature (an "Architecture Decision Record" heading, or Status / Context / Decision / Consequences as section headings). A decision log that clears none of these — unnumbered files outside any recognised directory, without those headings — is not seen by this check and this row is then wrong. If that is your case, say so rather than renaming anything; otherwise, consider recording architectural decisions in `docs/adr/`. ADRs are expected here because `lib/main.dart` makes this repository a deployable product (line 14).
D26 · Project Cohesion· Projects may be oversized for their cohesion · ×1
Projects may be oversized for their cohesion pubspec.yaml:1— `(repository root)` (47294 LoC, 271 module-visible types across 7 directories) overshoots its size bounds. 1 of 2 build unit(s) (Gradle, pub) overshoot their size bounds, lowering Project Cohesion to 0.0/10. Review these for cohesion — draw the boundary inside the module first (group each responsibility into its own package or directory and keep the cross-boundary members non-public), since splitting a published package moves types between packages and breaks consumers.
No ADRs — No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
M2 · Architecture documentation· No architecture diagram/doc · ×1
No architecture diagram/doc — No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.
Logging is not universal — Only 1/2 runnable modules use logging (modules with no entry point or server are excluded — they are libraries a runnable module hosts). Silent: `.`.
No SAST — No static application security testing detected. For this repository's stack, add the Dart analyzer's security lints plus `semgrep --config=auto` as a CI step. What was searched, so you can tell an absence from a miss: the 1 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner.
No dependency-update automation android/app/build.gradle.kts:147— `android/app/build.gradle.kts` declares packages, and nothing in the repository keeps them current: no Dependabot or Renovate configuration that schedules updates, and no dependency-review gate on pull requests. A pinned dependency stays at the version it was added at until someone notices — including after an advisory is published against it. Add a `.github/dependabot.yml` with one `package-ecosystem` entry per ecosystem the tree uses (or an enabled `renovate.json`), and gate pull requests with `actions/dependency-review-action`.
No release approval gate REDACTED:181— The release is automated and no gate that pauses it for a human is DECLARED IN THIS REPOSITORY'S PIPELINE FILES. What was read: every file under `.github/workflows/`, `.forgejo/workflows/`, `.gitea/workflows/`, `.azuredevops/` and `.azure-pipelines/`, plus `.gitlab-ci*` and `azure-pipelines*` — with comment text stripped, so documenting a gate is not declaring one. What would have counted: GitLab's `when: manual`, CircleCI's `type: approval`, an Azure `ManualValidation@` task or an `approvals:` block, a Jenkins `input` step, a `uses:` step naming an approval action, an `environment:` paired with `reviewers` / `required_reviewers` / `protection` / `wait-timer` / `deployment_branch_policy`, a draft-release step, a `workflow_dispatch` promotion, or a release-event gate. ★ What this cannot see, because none of it is a file: a GitHub environment whose required reviewers are configured in repo SETTINGS, a branch protection rule, or an organisation deployment policy — all of them real, enforced gates that live outside the repository. If yours is one of those, this row is wrong and nothing in the tree could have told us. Otherwise: whatever the release trigger points at is published to users unreviewed, so a mistagged or unverified commit ships and the only remedy is a follow-up release.
No app-layer HTTPS enforcement detected — This repository runs an HTTP server that is not bound to the loopback interface alone — or binds it at an address its source does not spell out — and nothing in its Dart source secures the transport: no `HttpServer.bindSecure` or `securityContext:`, no `Strict-Transport-Security` header, no `X-Forwarded-Proto` read from a TLS-terminating proxy — so its traffic may cross the network in clear text. (−2.0 on this card.) The server: lib/utils/functions.dart:1604 — `HttpServer.bind(`.
No security response headers detected — None of the 11 security response headers the OWASP Secure Headers Project recommends (Content-Security-Policy, Strict-Transport-Security, X-Content-Type-Options, X-Frame-Options, …) is set on a response this repository's Dart server sends — defense in depth, even when a proxy could set them. (−2.0 on this card.) The server: lib/utils/functions.dart:1604 — `HttpServer.bind(`.
Hand-rolled JSON/XML parsing via regex lib/ui/widgets.dart:11889— A regex whose pattern encodes JSON/XML syntax is parsing a structured format by hand — malformed or differently-typed content (e.g. `"amount": "5"` as a string) silently mis-parses instead of failing validation. This Dart code already uses a real parser in the same package; use it here too.
Appendix B — Reproduction & audit trail
Every external tool invocation behind a deep-scan dimension — the tool, its captured version, the exact command, how many findings it yielded, and a link to the retained raw output. To reproduce any finding: check out the same commit and run the command shown (repo-relative — never an absolute scratch path). The complete raw scanner output is retained verbatim under artifacts/raw/ (indexed in artifacts/raw/index.json); per-invocation exit codes and wall-clock durations are in sidecar.json — kept out of this table so the rendered report stays byte-identical across runs of the same commit.
trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.
semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that. semgrep could not parse 1 file(s) — `assets/webview/eruda.js` — so the PII/GDPR sweep did not cover them at all.
disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
Run 01a1e5ef-8a3b-7de6-bc7d-e2090c46b957 · every finding is also locatable in findings.md, and the complete scoring record (with exit codes + durations) in sidecar.json.
Issues: 7 · Warnings: 526 · Recommendations: 30 — Appendix A · all findings · full markdown report.
Generated by the Canine Code Analyzer: deterministic code-health analysis. 16-11-2026 @ 19:57 UTC.
Downloadable artifacts
Machine-readable and reproducible from this commit + frozen rubric — drop them straight into a contract appendix, a CRA dossier, or a downstream SCA / VEX tool.