Public report of ProvableHQ/snarkOS, published 14 November 2026. It has the same score, grades and number of findings as the full report. The details of security findings (where they are in the code, which known vulnerabilities and which passwords or keys were found) are left out, so nobody can use them against the project.
Public
Executive report Measured under the Code Assurance Index, an open standard for code quality, using its published scoring rules (rubric version 2026.11.4). Assert signed this survey and filed it in the standard's public register, where anyone can look it up by its survey ID. Check this survey → Signed and filed in the standard's public register, 14 November 2026, 20:11 UTC · Survey ID cd_b4a10d75530341048f123e9b2c72d345

ProvableHQ/snarkOS

Measured 14 November 2026, 20:08 UTC, at code version 1f0ceab

CAI score 38out of 100 Weak
CriticalWeakAdequateStrongExemplary
Down 17 since the last survey

The score is built from these lenses. Each lens grades one area of the code, such as how easy it is to change or how well it is protected. The weakest lens counts most, so one weak area pulls the score down instead of being averaged away.

A medium codebase: 53,805 lines of product code in 22 projects, tests not counted · Estimated rebuild effort: about 0.3 person-years · Weakest lens: Event Sourcing, 10

Findings by how serious they are

32 critical 296 serious 83 minor

25 dimensions are left out of the score. For each one, we either couldn't measure it in this code, or found no evidence of the safeguard we look for, such as a tested backup restore. They count neither for nor against the score, and Limitations lists each one with its reason.

This survey was produced by

Assert small markCanine Code Analyzer
Producer
Canine Development
Analyzer
Canine Code Analyzer engine 1.0.0
Measured
14 November 2026, 20:08 UTC

A measurement, not a certificate. The Code Assurance Index records a number together with the evidence it was worked out from, so anyone can recalculate it, but it doesn't certify or guarantee the code. The standard was written by Canine Development, which also builds the Canine Code Analyzer. It is open to any tool that implements it, and today the Canine Code Analyzer is the only one that does.

The score is deterministic, which means the same code always gets the same score. We work it out with tools that follow published rules, and an AI model never decides it, so anyone who applies the same rules to the same code gets the same number. How it is done is explained under Methodology ▸

50of 50 dimensions measured by tools.
364of 411 findings point to an exact file and line, so you can open each one in the code. The other 47 concern the repository as a whole, such as missing documentation.
50dimensions across 7 lenses, read from 53,805 lines of product code in 22 projects.
Chapters

Executive summary

ProvableHQ/snarkOS falls short of our standard for production, held back most by its Event Sourcing lens, the way the code stores and replays its history of events. It scores 38 out of 100 and is rated Weak, and 31 of its 32 critical findings are security problems.

Event Sourcing, at 10, is the weakest lens and counts most in the score. The best first step is making the events unchangeable, worth about 24 points. Raising Event Sourcing to 70 would lift the score to about 62.

Fifteen passwords or keys in the code's history and one in the code are open to anyone who can read the repository. Ten pipeline tools are referenced by a changeable name, so the build pipeline can be tampered with, and one automatic update takes new releases before a bad one can be spotted. Replacing each exposed password or key, pinning each tool to an exact version and setting a waiting period for automatic updates would close these risks. The pipeline step that installs packages without pinning their versions needs the packages it installs pinned to exact versions. The pipeline step that runs a download without checking it needs each download checked against a known checksum first. Making recorded events unchangeable would take care of the recorded event that can be changed afterwards.

The product code is 53,805 lines, about €51,000 to rebuild.

A lens is capped at Adequate while one of its dimensions scores below 4 out of 10, however well the rest of the lens does. That way a serious problem in one place always shows in the lens's rating.

How the score is built: what each lens counts for The lenses don't count equally. The weakest lens counts most, the next weakest a little less, and so on, so a weak area pulls the score down instead of being averaged away. In the bar below, each part's width shows how much that lens counts and its colour shows its rating. Improving the widest part moves the score most, and as that lens improves, it counts for less, because another lens becomes the weakest.
Event Sourcing 10 · counts for 46%Code Health 60 · counts for 25%Production Readiness 60 · counts for 14%Security and Compliance 61 · counts for 8%Maturity 63 · counts for 4%Performance 87 · counts for 2%Architecture 96 · counts for 1%

If Event Sourcing rose from 10 to 70, the lowest score rated Strong, the score would rise from 38 to about 62.

Code composition: what the lines of code are
Product code 90%Tests 10%
New since the last survey: 67 findings

These 67 critical or serious findings weren't in the previous survey, on 28 October 2026.

  • Code Duplication · Edited copy of a member (83 corresponding lines) node/src/client/mod.rs
  • Code Duplication · Edited copy of a member (41 corresponding lines) node/tcp/src/protocols/disconnect.rs
  • Code Duplication · Edited copy of a member (46 corresponding lines) node/bft/src/gateway.rs
  • Code Duplication · Edited copy of a member (39 corresponding lines) node/bft/src/sync/mod.rs
  • Code Duplication · Edited copy of a member (40 corresponding lines) cli/src/commands/account.rs
  • Code Duplication · Edited copy of a member (19 corresponding lines) node/bft/events/src/lib.rs
  • Code Duplication · Edited copy of a member (24 corresponding lines) node/tcp/src/protocols/reading.rs
  • Code Duplication · Edited copy of a member (17 corresponding lines) node/bft/events/src/lib.rs
  • Code Duplication · Edited copy of a member (28 corresponding lines) node/bft/src/worker.rs
  • Code Duplication · Edited copy of a member (38 corresponding lines) node/src/node.rs
  • Code Duplication · Edited copy of a member (15 corresponding lines) node/rest/src/routes.rs
  • Code Duplication · Edited copy of a member (17 corresponding lines) node/tcp/src/protocols/writing.rs
  • Code Duplication · Edited copy of a member (24 corresponding lines) node/bft/src/helpers/channels.rs
  • Code Duplication · Edited copy of a member (14 corresponding lines) cli/src/commands/developer/mod.rs
  • Code Duplication · Edited copies of one member (3 members, 12+ corresponding lines) node/bft/events/src/challenge_request.rs
  • Code Duplication · Edited copy of a member (16 corresponding lines) node/bft/ledger-service/src/helpers.rs
  • Code Duplication · Edited copy of a member (16 corresponding lines) node/sync/src/ping.rs
  • Code Duplication · Edited copies of one member (3 members, 18+ corresponding lines) node/bft/src/helpers/proposal.rs
  • Code Duplication · Edited copy of a member (19 corresponding lines) node/bft/src/helpers/pending.rs
  • Code Duplication · Edited copy of a member (21 corresponding lines) node/src/client/mod.rs
  • Code Duplication · Edited copy of a member (14 corresponding lines) cli/src/commands/clean.rs
  • Code Duplication · Edited copy of a member (14 corresponding lines) node/router/src/helpers/cache.rs
  • Code Duplication · Edited copy of a member (11 corresponding lines) node/bft/src/gateway.rs
  • Code Duplication · Edited copy of a member (8 corresponding lines) node/bft/src/helpers/pending.rs
  • Code Duplication · Edited copies of one member (3 members, 11+ corresponding lines) node/router/messages/src/helpers/codec.rs
  • Code Duplication · Edited copy of a member (9 corresponding lines) node/bft/src/helpers/ready.rs
  • Code Duplication · Edited copy of a member (26 corresponding lines) node/router/src/outbound.rs
  • Code Duplication · Edited copies of one member (3 members, 8+ corresponding lines) node/bft/events/src/challenge_request.rs
  • Code Duplication · Edited copies of one member (3 members, 12+ corresponding lines) node/bft/src/helpers/storage.rs
  • Code Duplication · Edited copy of a member (11 corresponding lines) node/bft/ledger-service/src/mock.rs
  • Code Duplication · Edited copy of a member (5 corresponding lines) node/bft/src/helpers/pending.rs
  • Code Duplication · Edited copy of a member (11 corresponding lines) node/rest/src/routes.rs
  • Code Duplication · Edited copy of a member (13 corresponding lines) node/sync/src/block_sync/metrics.rs
  • Code Duplication · Edited copy of a member (7 corresponding lines) node/bft/events/src/validators_response.rs
  • Code Duplication · Edited copies of one member (3 members, 7+ corresponding lines) node/bft/events/src/challenge_response.rs
  • Code Duplication · Edited copy of a member (7 corresponding lines) node/bft/src/sync/mod.rs
  • Code Duplication · Edited copy of a member (3 corresponding lines) node/sync/src/block_sync.rs
  • Code Duplication · Edited copy of a member (5 corresponding lines) node/bft/events/src/challenge_response.rs
  • Code Duplication · Edited copy of a member (9 corresponding lines) node/bft/events/src/helpers/codec.rs
  • Code Duplication · Edited copy of a member (6 corresponding lines) ledger-distribution/src/blocks_bucket.rs
  • Code Duplication · Edited copy of a member (3 corresponding lines) node/bft/src/helpers/cache.rs
  • Code Duplication · Duplicated block (17 lines × 2) node/src/client/mod.rs
  • Code Duplication · Duplicated block (15 lines × 3) cli/src/commands/account.rs
  • Code Duplication · Duplicated block (13 lines × 2) node/bft/src/gateway.rs
  • Code Duplication · Duplicated block (13 lines × 2) node/bft/src/helpers/cache.rs
  • Code Duplication · Duplicated block (11 lines × 2) node/sync/src/block_sync.rs
  • Code Duplication · Duplicated block (7 lines × 2) node/bft/src/sync/mod.rs
  • Code Duplication · Duplicated block (6 lines × 2) node/bft/src/gateway.rs
  • Code Duplication · Duplicated block (8 lines × 2) ledger-distribution/src/blocks_bucket.rs
  • Code Duplication · Duplicated block (5 lines × 2) node/tcp/src/protocols/handshake.rs
  • Code Duplication · Duplicated block (5 lines × 2) node/bft/src/gateway.rs
  • Code Duplication · Duplicated block (8 lines × 2) node/bft/src/helpers/cache.rs
  • Code Duplication · Duplicated block (13 lines × 2) node/src/client/mod.rs
  • Code Duplication · Duplicated block (9 lines × 2) node/bft/src/primary.rs
  • Code Duplication · Duplicated block (9 lines × 2) node/src/client/mod.rs
  • Code Duplication · Duplicated block (9 lines × 2) node/bft/src/gateway.rs
  • Code Duplication · Duplicated block (6 lines × 3) node/tcp/src/protocols/handshake.rs
  • Churn × Complexity Hotspots · Hotspot: cli/src/commands/developer/mod.rs cli/src/commands/developer/mod.rs
  • Static Analysis (SAST) · REDACTED
  • Static Analysis (SAST) · REDACTED
  • Dependency Vulnerabilities · REDACTED
  • Dependency Vulnerabilities · REDACTED
  • Change Coupling · Change coupling: execute.rs ↔ transfer_private.rs cli/src/commands/developer/execute.rs
  • Change Coupling · Change coupling: deploy.rs ↔ execute.rs cli/src/commands/developer/deploy.rs
  • Supply-chain Provenance & Signing · REDACTED
  • Async correctness · Blocking `thread::sleep` inside an `async` body ledger-distribution/src/main.rs
  • Async & latency hygiene · Sync-over-async blocking ledger-distribution/src/main.rs

We compare every finding with the previous survey's. A finding that has only moved to another line in the same file counts as the same finding, so only new findings appear here. Advisory notes from the AI model are left out, because the model words them afresh in every survey.

Fixed since the last survey: 62 findings

These 62 critical or serious findings were in the previous survey, on 28 October 2026, and are gone from this one.

  • Code Duplication · Duplicated block (13 lines × 2) node/bft/src/gateway.rs
  • Code Duplication · Duplicated block (13 lines × 2) node/bft/src/helpers/cache.rs
  • Code Duplication · Duplicated block (11 lines × 2) node/sync/src/block_sync.rs
  • Code Duplication · Duplicated block (7 lines × 2) node/bft/src/sync/mod.rs
  • Code Duplication · Duplicated block (6 lines × 2) node/bft/src/gateway.rs
  • Code Duplication · Duplicated block (5 lines × 2) node/tcp/src/protocols/handshake.rs
  • Code Duplication · Duplicated block (5 lines × 2) node/bft/src/gateway.rs
  • Code Duplication · Duplicated block (8 lines × 2) node/bft/src/helpers/cache.rs
  • Code Duplication · Duplicated block (13 lines × 2) node/src/client/mod.rs
  • Code Duplication · Duplicated block (6 lines × 3) node/tcp/src/protocols/handshake.rs
  • REDACTED Scanning · Leaked secret: signing-key .ci/test_db_backup.sh
  • REDACTED Scanning · Leaked secret: REDACTED .ci/test_db_backup.sh
  • REDACTED Scanning · Leaked secret: REDACTED .ci/test_db_backup.sh
  • REDACTED Scanning · Leaked secret: REDACTED .ci/test_db_backup.sh
  • REDACTED Scanning · Leaked secret: REDACTED .ci/test_db_backup.sh
  • Churn × Complexity Hotspots · Repeated repair: node/router/messages/src/unconfirmed_transaction.rs node/router/messages/src/unconfirmed_transaction.rs
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: watchdog-secret-into-unpinned-action REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: watchdog-secret-into-unpinned-action REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: watchdog-secret-into-unpinned-action REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: watchdog-secret-into-unpinned-action REDACTED
  • Dependency Vulnerabilities · Medium vulnerability: [GHSA redacted] REDACTED
  • Change Coupling · Change coupling clique: deploy.rs, execute.rs, transfer_private.rs cli/src/commands/developer/deploy.rs
  • Outbound HTTP resilience · Outbound HTTP without resilience node/cdn/src/blocks.rs
Rebuild cost: about €51,000 · Estimate
Cost to rebuild€17,000 to €84,000, for 280 to 889 hours of work, about 0.3 person-years for one engineer
Difficulty of the problemStandard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write.
Quality factor×0.7 at a score of 38. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it.
SizeMedium: 53,805 lines of product code
What it is notNot a quotation: nobody has offered to build it for that. Not a valuation: it says nothing about what the business is worth. Not a certified figure: no professional has signed it as one.

How the estimate is made: We price the hours a team would need to write this code again, at €60 to €95 an hour. Declarations and boilerplate are priced at a fast rate and logic at a slower one, and the logic is then multiplied by the difficulty of the problem and by the quality factor. The estimate can be about 30% off either way, and it moves most with the hourly rate and the difficulty. For this code, every line is priced as straight logic, which keeps the estimate on the low side.

Top priorities

The three actions that raise the score most for the work they take. The full ranked list is in the Roadmap.

1
Resolve the 1 finding(s) in Immutable events.
Raises the score by about 24 points · Medium effort · Immutable events
2
Resolve the 1 No ADRs found finding(s) in ADR Quality — start with Cargo.toml.
Raises the score by about 1 point · Low effort · ADR Quality
3
Resolve the 1 Leaked secret finding(s) in REDACTED Scanning — start with REDACTED.
Raises the score by about 1 point · Low effort · REDACTED Scanning

Diagnosis: what the measurements show together

Each conclusion below combines several dimensions into one point that no single dimension shows, and lists the measurements it rests on.

Where the investment is most exposed · Value at risk
This code would cost about €51,000 to build again, about 0.3 person-years of work. Its weakest lens is Event Sourcing, at 10 (Critical). Event Sourcing is about whether the stored history the system is built on can be trusted. Because the weakest lens counts most in the score, work on Event Sourcing also moves the score most.
Based on: the rebuild estimate · the Event Sourcing grade · how much each lens counts
What to do: Start with the Event Sourcing actions in Top priorities.
If you do one thing first · First action
Resolve the 1 finding(s) in Immutable events. Of all the actions in this report, it raises the score most for the work it takes: about 24 points for medium effort, because it clears the 1 Immutable events findings. The next survey will show the change in the score.
Based on: the ranked actions in Top priorities, by score gain and effort

Architecture — module dependency graph

Project dependencies, layered top-to-bottom; arrows show direction. Any dashed red edge points upward or sideways, which only happens where the projects form a dependency cycle. A graph without cycles has none.

arch snarkos snarkos snarkos-account snarkos-account snarkos->snarkos-account snarkos-cli snarkos-cli snarkos->snarkos-cli snarkos-node snarkos-node snarkos->snarkos-node snarkos-node-bft snarkos-node-bft snarkos->snarkos-node-bft snarkos-node-cdn snarkos-node-cdn snarkos->snarkos-node-cdn snarkos-node-consensus snarkos-node-consensus snarkos->snarkos-node-consensus snarkos-node-metrics snarkos-node-metrics snarkos->snarkos-node-metrics snarkos-node-rest snarkos-node-rest snarkos->snarkos-node-rest snarkos-node-router snarkos-node-router snarkos->snarkos-node-router snarkos-node-sync snarkos-node-sync snarkos->snarkos-node-sync snarkos-node-tcp snarkos-node-tcp snarkos->snarkos-node-tcp snarkos-cli->snarkos-account snarkos-display snarkos-display snarkos-cli->snarkos-display snarkos-cli->snarkos-node snarkos-cli->snarkos-node-cdn snarkos-cli->snarkos-node-metrics snarkos-cli->snarkos-node-rest snarkos-utilities snarkos-utilities snarkos-cli->snarkos-utilities snarkos-display->snarkos-node snarkos-display->snarkos-utilities snarkos-node->snarkos-account snarkos-node->snarkos-node-bft snarkos-node->snarkos-node-cdn snarkos-node->snarkos-node-consensus snarkos-node->snarkos-node-metrics snarkos-node-network snarkos-node-network snarkos-node->snarkos-node-network snarkos-node->snarkos-node-rest snarkos-node->snarkos-node-router snarkos-node->snarkos-node-sync snarkos-node->snarkos-node-tcp snarkos-node->snarkos-utilities snarkos-node-bft->snarkos-account snarkos-node-bft-events snarkos-node-bft-events snarkos-node-bft->snarkos-node-bft-events snarkos-node-bft-ledger-service snarkos-node-bft-ledger-service snarkos-node-bft->snarkos-node-bft-ledger-service snarkos-node-bft-storage-service snarkos-node-bft-storage-service snarkos-node-bft->snarkos-node-bft-storage-service snarkos-node-bft->snarkos-node-metrics snarkos-node-bft->snarkos-node-network snarkos-node-bft->snarkos-node-sync snarkos-node-bft->snarkos-node-tcp snarkos-node-bft->snarkos-utilities snarkos-node-bft-events->snarkos-node-network snarkos-node-sync-locators snarkos-node-sync-locators snarkos-node-bft-events->snarkos-node-sync-locators snarkos-node-bft-events->snarkos-node-tcp snarkos-node-bft-ledger-service->snarkos-node-metrics snarkos-node-bft-ledger-service->snarkos-utilities snarkos-node-cdn->snarkos-node-metrics snarkos-node-cdn->snarkos-utilities snarkos-node-consensus->snarkos-account snarkos-node-consensus->snarkos-node-bft snarkos-node-consensus->snarkos-node-bft-ledger-service snarkos-node-consensus->snarkos-node-bft-storage-service snarkos-node-consensus->snarkos-node-metrics snarkos-node-consensus->snarkos-node-sync snarkos-node-consensus->snarkos-utilities snarkos-node-network->snarkos-node-tcp snarkos-node-rest->snarkos-node-cdn snarkos-node-rest->snarkos-node-consensus snarkos-node-rest->snarkos-node-metrics snarkos-node-rest->snarkos-node-network snarkos-node-rest->snarkos-node-router snarkos-node-rest->snarkos-node-sync snarkos-node-router->snarkos-account snarkos-node-router->snarkos-node-bft-ledger-service snarkos-node-router->snarkos-node-metrics snarkos-node-router->snarkos-node-network snarkos-node-router-messages snarkos-node-router-messages snarkos-node-router->snarkos-node-router-messages snarkos-node-router->snarkos-node-sync-locators snarkos-node-router->snarkos-node-tcp snarkos-node-router->snarkos-utilities snarkos-node-router-messages->snarkos-node-bft-events snarkos-node-router-messages->snarkos-node-network snarkos-node-router-messages->snarkos-node-sync-locators snarkos-node-router-messages->snarkos-node-tcp snarkos-node-sync->snarkos-node-bft-ledger-service snarkos-node-sync->snarkos-node-metrics snarkos-node-sync->snarkos-node-network snarkos-node-sync->snarkos-node-router snarkos-node-sync->snarkos-node-sync-locators snarkos-node-tcp->snarkos-node-metrics __more__ +2 more projects

Architecture: which parts of the code depend on which

The code is divided into modules, groups of code that each handle one part of the product, and a module depends on another when it uses code from it. The table lists the modules both down the side and across the top, in an order where each module should only use modules listed above it. A number in a cell means the module on that row uses the module in that column, and it counts the pairs of building blocks (types) that connect them. The one thing to look for is a mark above the diagonal line. It means two or more modules use each other in a loop (a dependency cycle), so none of them can be changed, tested or released on its own.

160 modules, with 279 dependencies between them. 3 loops run through 7 of the modules, marked above the diagonal.

The table shows the 40 modules with the most connections; 120 more are left out to keep it readable.

Which modules use which. The module on each row uses the module in each column, and the number counts the pairs of types that connect them. A cell above the diagonal is part of a loop.
uses →1 snarkos_account2 snarkos_cli.commands.developer3 snarkos_node_bft.helpers.channels4 snarkos_node_bft.helpers.storage5 snarkos_node_bft_events6 snarkos_node_network.node_type7 snarkos_node_network.resolver8 snarkos_node_router_messages9 snarkos_node_sync.block_sync10 snarkos_node_tcp.helpers.connections11 snarkos_utilities.node_data12 snarkos_utilities.signals13 snarkos_node.node14 snarkos_node_tcp.tcp15 snarkos_node_tcp16 snarkos_node_network.peering17 snarkos_node_tcp.protocols.disconnect18 snarkos_node_tcp.protocols.handshake19 snarkos_node_tcp.protocols.on_connect20 snarkos_node_tcp.protocols.reading21 snarkos_node_tcp.protocols.writing22 snarkos_node_router23 snarkos_node_router.outbound24 snarkos_node_sync.ping25 snarkos_node_bft.sync26 snarkos_node_router.heartbeat27 snarkos_node_router.inbound28 snarkos_node_bft.gateway29 snarkos_node_router.routing30 snarkos_node.traits31 snarkos_node_bft.primary32 snarkos_node_bft.worker33 snarkos_node_router.test_helpers34 snarkos_node.prover35 snarkos_node_bft.bft36 snarkos_node_consensus37 snarkos_node_rest38 snarkos_node.client39 snarkos_node.validator40 snarkos_node.bootstrap_client
1 snarkos_account
2 snarkos_cli.commands.developer
3 snarkos_node_bft.helpers.channels
4 snarkos_node_bft.helpers.storage
5 snarkos_node_bft_events
6 snarkos_node_network.node_type
7 snarkos_node_network.resolver
8 snarkos_node_router_messages
9 snarkos_node_sync.block_sync
10 snarkos_node_tcp.helpers.connections
11 snarkos_utilities.node_data
12 snarkos_utilities.signals
13 snarkos_node.node111
14 snarkos_node_tcp.tcp4
15 snarkos_node_tcp1
16 snarkos_node_network.peering111
17 snarkos_node_tcp.protocols.disconnect11
18 snarkos_node_tcp.protocols.handshake11
19 snarkos_node_tcp.protocols.on_connect1
20 snarkos_node_tcp.protocols.reading211
21 snarkos_node_tcp.protocols.writing11
22 snarkos_node_router2221221
23 snarkos_node_router.outbound1
24 snarkos_node_sync.ping1
25 snarkos_node_bft.sync11111
26 snarkos_node_router.heartbeat1
27 snarkos_node_router.inbound11
28 snarkos_node_bft.gateway23221232211111111
29 snarkos_node_router.routing1111111
30 snarkos_node.traits111
31 snarkos_node_bft.primary12111121
32 snarkos_node_bft.worker111
33 snarkos_node_router.test_helpers12131111111111111
34 snarkos_node.prover1311111111111111
35 snarkos_node_bft.bft13111112
36 snarkos_node_consensus121111
37 snarkos_node_rest11
38 snarkos_node.client1131111111111111112
39 snarkos_node.validator11311111111111111112
40 snarkos_node.bootstrap_client21111
Uses a module listed above itPart of a loopThe module itself
1 snarkos_account2 snarkos_cli.commands.developer3 snarkos_node_bft.helpers.channels4 snarkos_node_bft.helpers.storage5 snarkos_node_bft_events6 snarkos_node_network.node_type7 snarkos_node_network.resolver8 snarkos_node_router_messages9 snarkos_node_sync.block_sync10 snarkos_node_tcp.helpers.connections11 snarkos_utilities.node_data12 snarkos_utilities.signals13 snarkos_node.node14 snarkos_node_tcp.tcp15 snarkos_node_tcp16 snarkos_node_network.peering17 snarkos_node_tcp.protocols.disconnect18 snarkos_node_tcp.protocols.handshake19 snarkos_node_tcp.protocols.on_connect20 snarkos_node_tcp.protocols.reading21 snarkos_node_tcp.protocols.writing22 snarkos_node_router23 snarkos_node_router.outbound24 snarkos_node_sync.ping25 snarkos_node_bft.sync26 snarkos_node_router.heartbeat27 snarkos_node_router.inbound28 snarkos_node_bft.gateway29 snarkos_node_router.routing30 snarkos_node.traits31 snarkos_node_bft.primary32 snarkos_node_bft.worker33 snarkos_node_router.test_helpers34 snarkos_node.prover35 snarkos_node_bft.bft36 snarkos_node_consensus37 snarkos_node_rest38 snarkos_node.client39 snarkos_node.validator40 snarkos_node.bootstrap_clientsnarkos_account1snarkos_cli.commands.developer2snarkos_node_bft.helpers.channels3snarkos_node_bft.helpers.storage4snarkos_node_bft_events5snarkos_node_network.node_type6snarkos_node_network.resolver7snarkos_node_router_messages8snarkos_node_sync.block_sync9snarkos_node_tcp.helpers.connections10snarkos_utilities.node_data11snarkos_utilities.signals12snarkos_node.node13snarkos_node_tcp.tcp14snarkos_node_tcp15snarkos_node_network.peering16snarkos_node_tcp.protocols.disconnect17snarkos_node_tcp.protocols.handshake18snarkos_node_tcp.protocols.on_connect19snarkos_node_tcp.protocols.reading20snarkos_node_tcp.protocols.writing21snarkos_node_router22snarkos_node_router.outbound23snarkos_node_sync.ping24snarkos_node_bft.sync25snarkos_node_router.heartbeat26snarkos_node_router.inbound27snarkos_node_bft.gateway28snarkos_node_router.routing29snarkos_node.traits30snarkos_node_bft.primary31snarkos_node_bft.worker32snarkos_node_router.test_helpers33snarkos_node.prover34snarkos_node_bft.bft35snarkos_node_consensus36snarkos_node_rest37snarkos_node.client38snarkos_node.validator39snarkos_node.bootstrap_client401114111111111211112221221111111111123221232211111111111111111112111121111121311111111111111311111111111111131111121211111111311111111111111121131111111111111111221111+120 more modules (most-connected shown)

At a glance — Code Health · 60% · Adequate · gated by X4 ·

At a glance — Architecture · 96% · Exemplary ·

At a glance — Maturity · 63% · Adequate · gated by M2 ·

At a glance — Readiness · 60% · Adequate · gated by P7 ·

At a glance — Security · 61% · Adequate · gated by D28, D36 ·

At a glance — Event Sourcing · 10% · Critical · gated by ES2 ·

At a glance — Performance · 87% · Strong ·

Security & Compliance — OWASP Top-10 mapping

Findings mapped to OWASP categories; the specific CVEs/secrets are in the Security dimension cards below and findings.md (redacted only on the public version of this report).

OWASP categoryFindingsSeverity
A07:2025 — Authentication Failures17High / Critical
A03:2025 — Software Supply Chain Failures16Medium
A05:2025 — Injection15High / Critical
A02:2025 — Security Misconfiguration2High / Critical

Roadmap

Top priorities: Resolve the 1 finding(s) in Immutable events; Interpolated log message defeats structured logging; Resolve the 1 No ADRs found finding(s) in ADR Quality — start with Cargo.toml.

Ranked by impact ÷ effort. "Helps" is the estimated gain on the 0–100 health score.

Do thisHelpsEffortDimension
Resolve the 1 finding(s) in Immutable events.+24.4 ptsMediumImmutable events
Resolve the 1 No ADRs found finding(s) in ADR Quality — start with Cargo.toml.+1.3 ptsLowADR Quality
Resolve the 1 Leaked secret finding(s) in REDACTED Scanning — start with REDACTED.+1.2 ptsLowREDACTED Scanning
Interpolated log message defeats structured logging+1.3 ptsMediumStructured logging
Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.+1.2 ptsMediumArchitecture documentation
Give every client a whole-request bound: `reqwest::Client::builder().timeout(Duration::from_secs(10))` (never `reqwest::get` or `Client::new()`, which have none), ureq's `timeout_global`, or wrap the call in `tokio::time::timeout`; add retry with back-off (`reqwest-retry`'s `RetryTransientMiddleware`, `backoff`) around dependencies that fail.+0.6 ptsMediumOutbound HTTP resilience
Resolve the 60 TodoComment finding(s) in Explicit Debt — start with block_sync.rs (8), lib.rs (5), mod.rs (5).+0.3 ptsMediumExplicit Debt
Resolve the 15 REDACTED finding(s) in Secrets (history) — start with REDACTED (5), REDACTED (5), REDACTED (2).+0.6 ptsMediumSecrets (history)

File quality

Per-file score 0–10 — a quality signature. Of 93 files carrying findings, judged against the Production bar: 1% slop · 65% mixed · 34% near-clean.

FileScoreBandWorst signal
REDACTED2.4SlopStatic Analysis (SAST): High: REDACTED
REDACTED4.4MixedREDACTED Scanning: Leaked secret: REDACTED
REDACTED4.6MixedSecrets (history): REDACTED: REDACTED
REDACTED4.6MixedSecrets (history): REDACTED: REDACTED
node/src/client/mod.rs4.8MixedCognitive Complexity: Client::initialize_solution_verification (cognitive 25)
REDACTED5.1MixedStatic Analysis (SAST): High: REDACTED
REDACTED5.1MixedIaC & Container Security: High IaC: REDACTED
REDACTED5.3MixedDependency Vulnerabilities: Medium vulnerability: REDACTED
REDACTED5.8MixedSecrets (history): REDACTED: REDACTED
node/bft/src/gateway.rs6.0MixedExplicit Debt: TodoComment
node/bft/src/primary.rs6.0MixedExplicit Debt: TodoComment
cli/src/commands/start.rs6.0MixedExplicit Debt: TodoComment
node/bft/src/sync/mod.rs6.0MixedExplicit Debt: TodoComment
node/sync/src/block_sync.rs6.0MixedExplicit Debt: TodoComment
node/bft/src/helpers/storage.rs6.0MixedExplicit Debt: TodoComment
node/cdn/src/blocks.rs6.0MixedExplicit Debt: TodoComment
node/rest/src/routes.rs6.0MixedExplicit Debt: TodoComment
node/consensus/src/lib.rs6.0MixedExplicit Debt: TodoComment
node/bft/src/worker.rs6.0MixedExplicit Debt: TodoComment
node/bft/events/src/lib.rs6.0MixedExplicit Debt: TodoComment

How the grades work

Every finding carries one of four grades. Three say how serious it is. The fourth says this survey could not settle it — and it is a grade, not a gap.

Critical — 32

A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.

Serious — 296

Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.

Minor — 83

Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.

Could not be resolved — 25

Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.

Methodology & how to trust this report

This survey is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. All 50 evaluated dimensions are computed by tools and static analysis; no language model sets or judges any of them. Overall confidence is 0.9, the weighted average across measured dimensions.

Every figure here is one of two kinds, and we label which: ✓ Measured — a deterministic fact (LoC, complexity, coverage); ~ Modeled — an estimate from a stated model (cost, effort, value-at-risk), always a range with its assumptions, never a precise fact. We never present a modelled estimate as if it were measured. Perfect or absent scores carry their provenance too (ADR-0011): ✓ Tool-verified means the property itself was measured across the surface; ○ Nothing flagged means the probes came back clean — a claim bounded by what a repository can show; ⊘ Not evidenced means a working control (a tested restore, an automated rollback) showed no positive evidence — absence of evidence is not evidence of a control, so it's excluded from the score rather than awarded a spurious 10.

What we checked — 50 dimensions across the health lenses
D1D2D3D4D5D6D12D13D14D15D16D17D19D20D26D28D29D30D31D34D35D36D43D44AX10AX3AX4AX9C2ES2M1M2M3M4P1P10P2P3P4P6P7PF1PF3S1X1X14X15X21X30X4

Each chip is a dimension scored from real signals across architecture, testing, dependencies, security & compliance, documentation, git-history and code quality — in one coherent pass. A surface report typically covers a handful.

How to trust any code-health report — three questions
  1. Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 364 of 411 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line. (Every path in this report is repo-relative by construction: paths are normalized at the producer and the report is rejected if any rooted path leaks through.)
  2. Is there a tool behind the number? Every score below names the method that produced it: Roslyn, git or a scanner, not a narrative.
  3. Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.

This report answers yes to all three. That's the bar to hold any assessment to.

Tools & methods

The actual versions used this run (captured at analysis time) — re-run on the same commit for the identical score.

MethodBacksVersionEvaluator
Roslyn static analysisComplexity, cohesion, coupling, dead code, API surface, layering5.3.0✓ deterministic
Native secret scannerHardcoded secrets / credentials1.0.0✓ deterministic
Canine Code Analyzer duplication detector (in-process)Code duplication1.0.0✓ deterministic
Coverage (coverlet / dotnet-coverage)Line & branch coverage10.0.400✓ deterministic
NuGet / dotnetOutdated, vulnerable & deprecated dependencies10.0.400✓ deterministic
git / LibGit2SharpChurn hotspots, knowledge concentration, history2.43.0 · 0.31.0✓ deterministic
gitleaks · semgrep · trivy · checkovSecrets in history, SAST, CVEs, IaC & container, PII / GDPR1.86.0 · 0.69.3 · 3.2.533✓ deterministic

Every finding is locatable in findings.md. Run 01a1dbad-63ea-767f-9006-6b8b77259d54.

The exact command behind every deep-scan dimension — tool, version, invocation and retained raw output — is in Appendix B — Reproduction & audit trail.

Run transparency — what happened this run

What ran differently this time — a tool absent, degraded, or that fell back to an estimate. Named openly, not folded silently into the scores. A degraded run also records its exact cause in diagnostics.md.

  • D8 Code Coverage — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Coverage NOT MEASURED: the Rust half could not be measured — the Cargo suite in repository root did not build, so it was never run. Coverage is excluded from the score rather than counted as a near-zero. This is OUR limitation, not a defect in the repo.
  • D11 Test Reliability — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Test source is present (.rs) and this repository declares a Cargo test suite (repository root, 112 test files), but it was not re-run: no test result was produced. Not scored — this is a gap in the analyzer's language coverage, not a finding about this repository.
  • D19 Documentation Quality — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. Each ecosystem's manifests (what makes a folder runnable or a published package) need their own proof before D19 judges its units. Until then those folders' READMEs are judged only as documents (boilerplate, structure), never counted as complete.
  • D19 Documentation Quality — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. This kind did not reach the 95 % precision gate in three adjudicated runs (docs/plans/deterministic-engine/adjudication/D19-sample3-v3.md), so by the pre-registered fallback it publishes no row until a re-measurement shows it does. The candidates are counted here, not reported as findings, and the score does not include them.
  • D21 Naming Consistency — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D21's naming rules read C# through Roslyn and every other language through its sidecar model; these languages are left out (PHP's reading is its own change, a Roslyn-loaded VB or F# project has no population builder yet). Their declarations carry no naming verdict this run — this says nothing about whether their names are consistent.
  • D22 Internal API Consistency — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D22's deterministic call-shape rules are gated on C# first (docs/plans/deterministic-engine.md, P5): each other language is switched on only after its own concept suite and A/B gate pass. This says nothing about whether that surface is consistent.
  • D24 Comment Value — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check's reader does not cover the language this repository's product is written in, so it had nothing of the product to read. That is a gap in this analyzer's language reach — not a finding about this repository.
  • D27 Navigability — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Navigability is taken over call sites whose callee resolved. For C# that population includes calls into referenced assemblies; for this language only calls declared inside the repository count, so the abstention threshold reads the repository's use of its standard library as a resolution failure. That is a limit of this analyzer, not a build problem in this repository.
  • AX6 Interface segregation — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is computed over the public interfaces this run's compilations declare, and none was loaded, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • C1 Data Protection — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 'rocksdb' is imported (node/src/node.rs:38), but no entity, schema, table or model declaration this check reads was found beside it, so whether personal data is stored could not be decided.
  • C3 Audit Trail — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 'rocksdb' is imported (node/src/node.rs:38), but no entity, schema, table or model declaration this check reads was found beside it, so whether personal data is stored could not be decided.
  • C4 Data Retention — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 'rocksdb' is imported (node/src/node.rs:38), but no entity, schema, table or model declaration this check reads was found beside it, so whether personal data is stored could not be decided.
  • C5 Data-Subject Rights — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 'rocksdb' is imported (node/src/node.rs:38), but no entity, schema, table or model declaration this check reads was found beside it, so whether personal data is stored could not be decided.
  • GD1 Unfinished & placeholder code — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, F#, JavaScript/TypeScript, Dart, Ruby and Scala source only, and no C#, F#, JavaScript/TypeScript, Dart, Ruby or Scala was found, and this repository's Rust is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • IC1 Incompleteness & stubs — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, JavaScript/TypeScript, Java, Dart, Ruby and Scala source only, and no C#, JavaScript/TypeScript, Java, Dart, Ruby or Scala was found, and this repository's Rust is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • M4 Documentation accuracy — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. M4 checks only the claim kinds adjudicated at or above 95 % precision: links and versions (PREREGISTRATION version 9), and artefact counts an order of magnitude off. Paths, command arguments, installs, environment variables, settings, projects, packages, routes, cd targets, infrastructure products and removed modules are read but not checked, and none of them is reported or counted.
  • P5 DR & Backup — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. No backup/snapshot/replication config, RTO/RPO or restore-procedure documentation was found — and no production persistence was detected either (no data-access packages, no data-store services, no database resources), so there is nothing in this repository whose loss a DR control would recover. If this system's data lives in a platform or ops repo we can't see, that's where the DR evidence belongs.
  • X12 Unreachable branch — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Python, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Python, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X13 Undrained process stream — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Python, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Python, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X16 Unfloored truncation loop — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, PHP, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Java, PHP, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X17 Uncapped recursion over a caller-supplied document — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Python, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Python, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X18 Disposal-pattern correctness — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Dart, Ruby, Scala and PHP source only, and no C# was loaded and no JavaScript/TypeScript, Java, Kotlin, Dart, Ruby, Scala or PHP was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X19 Unrestored process-global state — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Python, Dart, Ruby, Scala and PHP source only, and no C# was loaded and no JavaScript/TypeScript, Java, Kotlin, Python, Dart, Ruby, Scala or PHP was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X22 Contradicted release guard — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and Java, TypeScript/JavaScript, Python, Dart, Ruby, Scala, Kotlin and PHP source only, and no C# was loaded, and this repository's Rust is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X23 Unguarded diagnostic materialisation — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, F#, Python, Dart, Ruby, Scala, Kotlin and PHP source only, and no C# was loaded and no JavaScript/TypeScript, Java, F#, Python, Dart, Ruby, Scala, Kotlin or PHP was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X24 Document value interpolated into markup unescaped — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Scala, Ruby and Python source only, and no C# was loaded and no JavaScript/TypeScript, Java, Scala, Ruby or Python was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X25 Inert configuration knob — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Scala, PHP, Erlang, Python, Dart and Ruby source only, and no C# was loaded and no JavaScript/TypeScript, Java, Kotlin, Scala, PHP, Erlang, Python, Dart or Ruby was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X3 Exception handling — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and PHP, Java, Kotlin, Python, Ruby, Scala, Dart, Swift, Erlang, Go and JavaScript/TypeScript source only, and no C# was loaded and no PHP, Java, Kotlin, Python, Ruby, Scala, Dart, Swift, Erlang, Go, JavaScript or TypeScript was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X4 Structured logging — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. 523 further occurrence(s) are not listed individually; the score already reflects all 563.
  • X5 Nullable reference types — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax and MSBuild project configuration, TypeScript source and its tsconfig files, Java source and its package and module declarations, PHP source and its PHPStan and Psalm configuration, Dart source and its pubspec language version, Ruby source and its Sorbet and Steep configuration, Scala source and its build's explicit-nulls, WartRemover and Scalafix settings, and Kotlin source only, and no C# was loaded, no TypeScript was found, and this repository's Rust is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.

Repo exclusion declarations (.gitattributes linguist-generated/vendored, .editorconfig generated_code): none declared — every source file was scored.

Limitations & what we did not check

We assess the repository exactly as committed, and only the repository. By design we do not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.

Per-dimension blind spots

For each dimension that was measured, what a static, repo-only scan structurally cannot see — the honest edge of the measurement, not a failure of it.

  • D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
  • D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
  • D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
  • D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
  • D5 Coupling: Coupling is measured between projects/assemblies — runtime coupling through DI, reflection, messaging or shared databases is invisible to a static reference graph.
  • D6 Cohesion (LCOM4): LCOM4 cohesion is syntactic — it infers connectivity from which methods touch which fields/methods by name, not from real runtime behaviour or intent.
  • D12 Dependency Hygiene: Dependency health reads manifests and lockfiles — a vulnerability in a vendored/copied dependency, or risk from how a dependency is actually used, is outside this view.
  • D13 REDACTED Scanning: REDACTED detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
  • D14 License Compliance: License compatibility is checked against declared package metadata and a policy — mislabelled or missing license metadata, and obligations that depend on how you distribute, are not resolved here.
  • D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
  • D16 Bus Factor: Bus-factor is a time-decayed model of commit attribution (who has recently, repeatedly worked a file), not comprehension — pairing, review and reading-without-committing spread knowledge it can't see; bot commits and shared accounts still distort it.
  • D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
  • D19 Documentation Quality: Documentation quality publishes two things only: a runnable or packaged unit with no example, and a multi-project root README that maps none of its parts. It does not judge clarity, and its other checks (overview, licence, boilerplate, structure, empty sections, XML-doc coverage) are withheld after adjudication: their candidates are counted in the card's gaps, not shown as rows. A false statement in a document is M4's; units are .NET projects only.
  • D20 ADR Quality: ADR quality checks the structure of the decision records present: it cannot know about decisions made and never recorded, and it does not judge how well a record argues its case. Records in a language the section lexicon does not cover are not evaluated.
  • D26 Project Cohesion: Project focus is sized from members/namespaces per project — a project that is broad by deliberate design reads the same as one that has sprawled.
  • D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
  • D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
  • D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
  • D31 IaC & Container Security: IaC scanning checks Dockerfiles/Terraform/Kubernetes against best-practice rules — it cannot see the live cloud account, runtime configuration, or drift between the committed config and what is actually deployed.
  • D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
  • D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
  • D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
  • D44 Platform End-of-Life: The support table is FROZEN, so it goes out of date by losing RECALL: a release that ended support after the table was written is missed until the table is refreshed, and this dimension reading 10 is not evidence that a platform is current. Only platforms the repository DECLARES in a place this pass reads are seen — a runtime named only in a Dockerfile (D31's subject), in a CI workflow (D29's), or in a file this pass does not parse (go.mod, a Gemfile ruby directive) is invisible here, which is why a repository declaring none of them abstains rather than scoring. Only frameworks with a PUBLISHED support policy are tracked: React, Flask and Express publish none, so their age cannot be judged and their absence from a report is not a statement that they are supported.
  • AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
  • AX9 CQS / query purity: Handlers are found by interface/name convention — a query handler using neither is not seen. Mutation is a resolved write/publish invocation (SaveChanges/repository/bus), so a write hidden behind a hand-rolled wrapper, reflection, or a string-keyed service locator resolves to a non-persistence type and isn't flagged; it detects that a query writes state, not whether the write is a legitimate read-side cache update. Clean means "no resolved write/publish in a query body", not a proof of CQS purity.
  • M4 Documentation accuracy: Documentation accuracy checks links, versions and artefact counts against the tree: other claims (paths, commands, settings, routes) are read but not checked, and it cannot run the onboarding or measure how long a real new joiner takes.
  • P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".
  • P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.

Dimensions

D1 · Cyclomatic Complexity7.4 / 10Strong✓ Tool-verified

What it measures: How tangled the control flow is — methods with many branches are hard to test and change.

Method: Cyclomatic complexity per method (1 + decision points), computed exhaustively across production source; test projects separated by convention. Deterministic.

Maturity: Documented → Verified → Prevented · effective 7.4 / 10 · rule-coverage 100% · ceiling Prevented

15 method(s) exceeded the cyclomatic complexity threshold of 15; the worst was Gateway::inbound at 57. A further 8 method(s) were over the threshold but excluded as flat dispatchers (a long switch/match over independent cases: many branches, almost no nesting), the largest being DisconnectReason::read_le at 21 — they are counted neither in the figure above nor in this dimension's score. 2 files carry no cyclomatic complexity row at all for this reason — every one of their over-threshold functions was excluded, so the exclusion is disclosed nowhere in the file itself: node/router/messages/src/helpers/disconnect.rs (DisconnectReason::read_le at 21), node/bft/events/src/lib.rs (Event::read_le at 18). They are named here because the per-file figures other dimensions report are taken BEFORE this exclusion, so such a file can show a high maximum complexity elsewhere in this report and nothing here, with nothing to reconcile the two.

Primary::propose_batch (cyclomatic 47) · ×3node/bft/src/primary.rs:476
Gateway::inbound (cyclomatic 57) · ×2node/bft/src/gateway.rs:646
Start::parse_node (cyclomatic 38) · ×2cli/src/commands/start.rs:800
Inbound::inbound (cyclomatic 47)node/router/src/inbound.rs:80
BFT::commit_leader_certificate (cyclomatic 27)node/bft/src/bft.rs:596

+ 6 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

  1. Bring the 15 bodies over 15 down to 15 or less in Cyclomatic Complexity — start with Gateway::inbound (cyclomatic 57), Primary::propose_batch (cyclomatic 47), Inbound::inbound (cyclomatic 47). — This score is capped by its worst body, so a finding fixed alone moves it by almost nothing — the next one down takes its place. Refactoring these 15 together lifts Cyclomatic Complexity from 7.4 to about 10.0/10, projected with the scoring formula itself and assuming each lands exactly at 15.

Detailed fixes: d1_recommendation.md · top locations in Appendix A, every location in findings.md.

D2 · Cognitive Complexity5.7 / 10Adequate✓ Tool-verified

What it measures: How hard the code is for a person to follow, beyond raw branching.

Method: Cognitive complexity per method (Sonar-style nesting-penalized score), computed exhaustively over production code, excluding test projects. Deterministic.

Maturity: Documented → Verified → Prevented · effective 5.7 / 10 · rule-coverage 100% · ceiling Prevented

46 method(s) exceeded the cognitive complexity threshold of 15; the worst was Primary::propose_batch at 97.

BlockSync::prepare_block_requests (cognitive 40) · ×7node/sync/src/block_sync.rs:975
Gateway::inbound (cognitive 70) · ×5node/bft/src/gateway.rs:646
Primary::propose_batch (cognitive 97) · ×4node/bft/src/primary.rs:476
Start::parse_node (cognitive 48) · ×4cli/src/commands/start.rs:800
Sync::sync_storage_with_ledger_at_bootup (cognitive 37) · ×4node/bft/src/sync/mod.rs:347

+ 14 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

  1. Bring the 12 bodies over 30 down to 30 or less in Cognitive Complexity — start with Primary::propose_batch (cognitive 97), Gateway::inbound (cognitive 70), Inbound::inbound (cognitive 64). — This score is capped by its worst body, so a finding fixed alone moves it by almost nothing — the next one down takes its place. Refactoring these 12 together lifts Cognitive Complexity from 5.7 to about 7.2/10, projected with the scoring formula itself and assuming each lands exactly at 30; a cleaner split scores higher.

Detailed fixes: d2_recommendation.md · top locations in Appendix A, every location in findings.md.

D3 · God Classes8.9 / 10Strong✓ Tool-verified

What it measures: Over-large classes that try to do too much ("god classes").

Method: God-class detection by line and method-count thresholds per logical type (partial classes unified), filtered for generated code and registration/contract false positives. Deterministic.

Maturity: Documented → Verified → Prevented · effective 8.9 / 10 · rule-coverage 100% · ceiling Prevented

28 god class(es) detected.

MethodTooLong: Primary.propose_batch · ×8node/bft/src/primary.rs:476
ClassTooLong: Primary · ×7node/bft/src/primary.rs:153
TooManyMethods: Rest · ×6node/rest/src/lib.rs:209
FileTooLong: src/gateway.rs · ×6node/bft/src/gateway.rs
TooManyFields: Startcli/src/commands/start.rs:140

What to do

  1. Resolve the 8 MethodTooLong finding(s) in God Classes — start with primary.rs (2), lib.rs (2), gateway.rs. — One of this dimension's main actionable groups (8 warning-level).
  2. Resolve the 7 ClassTooLong finding(s) in God Classes — start with primary.rs, gateway.rs, block_sync.rs. — One of this dimension's main actionable groups (7 warning-level).
  3. Resolve the 6 TooManyMethods finding(s) in God Classes — start with lib.rs, gateway.rs, primary.rs. — One of this dimension's main actionable groups (6 warning-level).

Detailed fixes: d3_recommendation.md · top locations in Appendix A, every location in findings.md.

D4 · Code Duplication8.5 / 10Strong✓ Tool-verified

What it measures: How much of the production code is copy-pasted: the share of production lines inside a reported copy (every copy of a duplicated block or of an edited member, each line once), 10 at none and 0 at a quarter of the lines.

Method: Code duplication via token-stream sliding windows with type-aware normalization (locals masked, type names preserved), scored on the share of production lines inside a reported copy (each line once; 10 at none, 0 at a quarter). Deterministic.

Maturity: Documented → Verified → Prevented · effective 8.5 / 10 · rule-coverage 100% · ceiling Verified

39 duplicated block group(s) detected. 3.7 % of the production lines (1,983 of 53,805) are in a reported copy. A further 43 rows report members as variants of one another; the share counts each copied line once, however many rows cite it.

Duplicated block (13 lines × 2) · ×6node/bft/src/gateway.rs:771
Duplicated block (8 lines × 2) · ×6node/bft/src/gateway.rs:288
Edited copy of a member (14 corresponding lines) · ×3cli/src/commands/developer/mod.rs:310
Edited copy of a member (11 corresponding lines) · ×3node/bft/src/gateway.rs:1002
Duplicated block (7 lines × 2) · ×3node/bft/src/helpers/storage.rs:976

+ 46 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

  1. Resolve the 6 Duplicated block (13 lines × 2) finding(s) in Code Duplication — start with gateway.rs, cache.rs, node.rs. — One of this dimension's main actionable groups (6 warning-level).
  2. Resolve the 6 Duplicated block (8 lines × 2) finding(s) in Code Duplication — start with gateway.rs (2), disconnect.rs (2), blocks_bucket.rs. — One of this dimension's main actionable groups (6 warning-level).
  3. Resolve the 3 Edited copy of a member (14 corresponding lines) finding(s) in Code Duplication — start with mod.rs, clean.rs, cache.rs. — One of this dimension's main actionable groups (3 warning-level).

Detailed fixes: d4_recommendation.md · top locations in Appendix A, every location in findings.md.

D5 · Coupling8.2 / 10Strong✓ Tool-verified

What it measures: Whether volatile projects sit underneath others that depend on them (so their churn ripples upward), and whether project dependencies form cycles. A widely-depended-on but stable shared/kernel project is healthy, not penalised.

Method: Dependency cycles via elementary-DFS over real .csproj references, plus Martin instability (afferent/efferent) per project. Exhaustive over the reference graph, deterministic.

Coverage: Exhaustive · type-level: afferent/efferent coupling + cycles computed over every production type — the population is all types, not a name convention.

Maturity: Documented → Verified → Prevented · effective 8.2 / 10 · rule-coverage 100% · ceiling Prevented

22 production modules (Cargo), 0 dependency cycle(s), 0 unstable depended-on module(s). Read from the build's own module declarations; 5 module(s) off the main sequence, with abstractness counted on 21 of the 22 (the rest declare no modelled class or interface, export only macros, declare types in source no model reads, or have no source directory of their own).

Off the main sequence: snarkos-account · ×5

What to do

  1. Resolve the 5 Off the main sequence finding(s) in Coupling. — One of this dimension's main actionable groups (5 warning-level).

Detailed fixes: d5_recommendation.md · top locations in Appendix A, every location in findings.md.

D6 · Cohesion (LCOM4)9.4 / 10Stronggated by 5 serious findings✓ Tool-verified

What it measures: Whether a class's methods are focused on a single responsibility.

Method: LCOM4 cohesion per production class with at least two methods: connected components of methods sharing state or calls, computed syntactically. Deterministic, not a proxy.

Coverage: Exhaustive · type-level: LCOM4 cohesion computed over every production class — the population is all types, not a name convention.

Maturity: Documented → Verified → Prevented · effective 9.4 / 10 · rule-coverage 100% · ceiling Verified

5 of 96 classes have LCOM4 above 3.

Low cohesion: MockLedgerService (LCOM4 7) · ×5node/bft/ledger-service/src/mock.rs:42

What to do

  1. Resolve the 5 Low cohesion finding(s) in Cohesion (LCOM4) — start with mod.rs (2), mock.rs, storage.rs. — One of this dimension's main actionable groups (5 warning-level).

Detailed fixes: d6_recommendation.md · top locations in Appendix A, every location in findings.md.

D12 · Dependency Hygiene9.4 / 10Exemplary✓ Tool-verified

What it measures: Whether dependencies are current, not deprecated, and not bloated. Known vulnerabilities are D30's.

Method: Manifest scan via dotnet list package across all projects; worst-signal-per-package deduction (capped-linear for deprecation, prerelease and outdated) per KLoC. Known-vulnerable packages are D30's and are not charged here (rubric-2026.11.2). Exhaustive.

Maturity: Documented → Verified → Prevented · effective 9.4 / 10 · rule-coverage 100% · ceiling Verified

11 outdated, 0 yanked direct Cargo dependencies. Only DIRECT edges are graded: a transitive crate cannot be moved past what its parent's requirement admits, so reporting one would be advice its owner cannot take. A newer release is reported only where this repository's OWN requirement already admits it, so the remedy is `cargo update` and never a manifest edit — which means a release outside the declared range is deliberately NOT charged, because a written-down constraint is a decision rather than a defect. Note that a bare requirement is a CARET, and for a 0.x crate its ceiling is the minor. Whether any crate is UNMAINTAINED is not graded — crates.io publishes no maintenance status, and release age does not stand in for one. Known CVEs in this dependency graph are D30's question, read from REDACTED there.

Outdated: cfg-if · ×11

✓ On the Gold path — maintain.

Detailed fixes: d12_recommendation.md · top locations in Appendix A, every location in findings.md.

D13 · REDACTED Scanning5.0 / 10Adequate✓ Tool-verified

What it measures: Whether any secrets (keys, tokens, passwords) have leaked into the code.

Method: In-process native secret scanner (entropy plus signature patterns) across all tracked files; no external tool. A clean result is a measured 10, not no-data zero. Deterministic.

Maturity: Documented → Verified → Prevented · effective 5.0 / 10 · rule-coverage 100% · ceiling Prevented

1 secret(s) detected. 5 detection(s) were excluded as holding no minted credential in material that runs: a name, reference or comparison rather than a value, a readable phrase or pattern, a value that declares itself fake, or development, test, example, mock or demo material.

REDACTED

What to do

  1. Resolve the 1 Leaked secret finding(s) in REDACTED Scanning — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).

Detailed fixes: d13_recommendation.md · top locations in Appendix A, every location in findings.md.

D14 · License Compliance10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether the licenses of third-party packages are compatible with your policy.

Method: Third-party package licenses resolved from declared package metadata and checked against the configured policy (allow/deny/copyleft). Deterministic; clean = no incompatible license found at metadata depth.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Verified

0 of 634 shipped crate(s) use a banned license. Licences were resolved from crates.io over the crates a consumer compiles — this repository's REDACTED closed over its manifests' `[dependencies]` and `[build-dependencies]`. Crates it asks for ONLY under `[dev-dependencies]` are excluded: they are not compiled by anything that depends on this repository. A further 61 crate(s) in the closure resolve from git, a path or a private registry and publish no licence this pass can read; they are outside this verdict. This repository publishes itself under Apache-2.0, which is its own choice and is not judged here.

✓ On the Gold path — maintain.

Detailed fixes: d14_recommendation.md.

D15 · Churn × Complexity Hotspots9.3 / 10Stronggated by 9 serious findings✓ Tool-verified

What it measures: Files that change often and are also complex — the riskiest hotspots.

Method: Per production file churn times cyclomatic complexity over a rolling window, computed from git and Roslyn/JS/Razor analysis. Exhaustive, deterministic per commit date.

Maturity: Documented → Verified → Prevented · effective 9.3 / 10 · rule-coverage 100% · ceiling Documented

Top hotspots: node/bft/src/primary.rs (37×47=1739); node/bft/src/gateway.rs (26×57=1482); cli/src/commands/start.rs (17×38=646) Repeated repair below the complexity floor: node/router/messages/src/helpers/codec.rs (5 of 8 changes were fixes)

Hotspot: node/bft/src/primary.rs · ×8node/bft/src/primary.rs:476
Repeated repair: node/router/messages/src/helpers/codec.rsnode/router/messages/src/helpers/codec.rs:96

What to do

  1. Resolve the 8 Hotspot finding(s) in Churn × Complexity Hotspots — start with primary.rs, gateway.rs, start.rs. — One of this dimension's main actionable groups (8 warning-level).
  2. Resolve the 1 Repeated repair finding(s) in Churn × Complexity Hotspots — start with codec.rs. — One of this dimension's main actionable groups (1 warning-level).

Detailed fixes: d15_recommendation.md · top locations in Appendix A, every location in findings.md.

D16 · Bus Factor9.0 / 10Exemplary✓ Tool-verified

What it measures: Whether knowledge is concentrated in too few people (the "bus factor").

Method: Living knowledge per author via time-decayed commit attribution (6-month half-life, focus weighting) across largest source files. Deterministic, avoids blame's mechanical-refactor false positives.

Maturity: Documented → Verified → Prevented · effective 9.0 / 10 · rule-coverage 100% · ceiling Documented

15 source file(s) have their living knowledge concentrated in one author (≥90% of recent, decayed contribution). The largest is node/bft/src/helpers/upgrade_monitor.rs. Counted over 149 of the 178 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.

Off-boarding risk: anonymized user #1 · ×2
Further sole-owners (lower concentration)

✓ On the Gold path — maintain.

Detailed fixes: d16_recommendation.md · top locations in Appendix A, every location in findings.md.

D17 · Explicit Debt9.8 / 10Stronggated by 60 serious findings✓ Tool-verified

What it measures: Acknowledged debt left in the code — TODOs, dead code, suppressed warnings.

Method: Roslyn syntactic debt markers (suppressions/TODO/FIXME/HACK/empty-catch/commented-code/Obsolete) plus SymbolFinder dead-code analysis; weighted-debt-per-KLoC density deducted 2.0x per unit. Deterministic, exhaustive.

Maturity: Documented → Verified → Prevented · effective 9.8 / 10 · rule-coverage 100% · ceiling Prevented

60 deducted task-comment markers across 53805 LoC (0.1/KLoC) → score 9.8. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.

TodoComment · ×60node/tests/common/test_peer.rs:155

What to do

  1. Resolve the 60 TodoComment finding(s) in Explicit Debt — start with block_sync.rs (8), lib.rs (5), mod.rs (5). — One of this dimension's main actionable groups (60 warning-level).

Detailed fixes: d17_recommendation.md · top locations in Appendix A, every location in findings.md.

D19 · Documentation Quality10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether the project's documentation is clear, complete, and useful.

Method: Every README, docs/ document and root guide parsed by its markup and measured in Unicode letters. Published: a runnable or packaged .NET project whose README (or a document it links, or a root guide) shows no example, and a root README naming none of three or more projects. Overview, licence, boilerplate, wall-of-text, empty-section and XML-doc rows are measured and withheld (counted in gaps) after adjudication. Deterministic, exhaustive, advisory.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

1 of 1 documentation facets pass in full. 22 document(s) read across 1 unit(s).

✓ On the Gold path — maintain.

Detailed fixes: d19_recommendation.md.

D20 · ADR Quality0.0 / 10Critical✓ Tool-verified

What it measures: Whether architecture decisions are recorded well (context, decision, consequences).

Method: Every ADR read by its section structure: nine located rules (a missing Decision, Context or Consequences section, a stale status, two records deciding the same question, a dangling supersede link, a number-only title, a single option, no named cost, no status where the log uses one, no enforcement field where the log adopted one), each a fixed deduction from 10; the score is the mean over evaluated records. Deterministic, no model. Advisory.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

No architecture decision records were found.

No ADRs foundCargo.toml:276

What to do

  1. Resolve the 1 No ADRs found finding(s) in ADR Quality — start with Cargo.toml. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d20_recommendation.md · top locations in Appendix A, every location in findings.md.

D26 · Project Cohesion10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether each project is a focused, coherent unit rather than an oversized grab-bag.

Method: Project size overshoot penalties (LoC / public-type count / namespace count, 2-of-3 flag) weighted by log magnitude. Exhaustive across projects, deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

0 of 22 build units (Cargo) flagged as possibly oversized/incoherent.

✓ On the Gold path — maintain.

Detailed fixes: d26_recommendation.md.

D28 · Secrets (history)0.0 / 10Critical✓ Tool-verified

What it measures: Whether any secrets were ever committed — scanned across the full git history, not just now.

Method: REDACTED scan via TWO gitleaks detect passes in an isolated checkout — the full git history, then a second --no-git pass over the working tree as it stands — merged and de-duplicated by (rule, file, line); each match flagged High. Both invocations are recorded in the audit trail. Exhaustive; when the tool is absent, or when its output cannot be parsed into the expected shape, the dimension is WITHHELD as an explicit measurement gap on our side — unscored and excluded from the lens, never a hedged middling score.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

15 finding(s): 0 critical, 15 high, 0 medium, 0 low. Remediation for historically-committed secrets is credential rotation — they remain in history regardless of later deletion.

REDACTED
REDACTED

What to do

  1. Resolve the 15 REDACTED finding(s) in Secrets (history) — start with REDACTED (5), REDACTED (5), REDACTED (2). — One of this dimension's main actionable groups (15 issue-level).
  2. Resolve the 1 Rotate the exposed credentials finding(s) in Secrets (history). — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d28_recommendation.md · top locations in Appendix A, every location in findings.md.

D29 · Static Analysis (SAST)4.8 / 10Weak✓ Tool-verified

What it measures: Real static-analysis (SAST) findings — likely security bugs in the code, any language.

Method: Polyglot static analysis via semgrep across the repo using the pinned, image-baked p/security-audit + p/owasp-top-ten rulesets (no scan-time registry fetch); severity rules (ERROR/WARNING/INFO) map to a full-band severity-weighted score. Exhaustive, deterministic; degrades on parse failure.

Coverage: semgrep pattern rules over all files — exhaustive for the rule set, blind to classes of bug without a rule (clean = no rule matched).

Maturity: Documented → Verified → Prevented · effective 4.8 / 10 · rule-coverage 100% · ceiling Documented

15 finding(s): 0 critical, 14 high, 1 medium, 0 low. 10 unpinned-GitHub-Actions row(s) are reported here but scored by D36 (supply-chain provenance), which measures that posture as `pinned_actions` — one pinning decision is charged once, not once per lens. semgrep hit a parse error in 6 file(s) — `.ci/test_full_upgrade.sh` (line 210, line 327), `.ci/test_reset_minority.sh` (line 31), `.ci/test_restart_majority.sh` (line 32), `.ci/test_simple_node.sh` (line 52), `REDACTED` (line 373), … (+1 more) — so no absence of findings in the named regions is evidence of anything; rows reported elsewhere in those files are real. Fix the syntax error (or exclude the file deliberately) and re-scan to cover them. Separately, one or more rules could not re-parse an embedded snippet in 1 file(s) (e.g. a workflow `run:` block read as shell). Those files WERE scanned and their other rows are unaffected; only those rules' view of those snippets is missing.

REDACTED
REDACTED
REDACTED
REDACTED
REDACTED

+ 2 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

  1. Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
  2. No action in Static Analysis (SAST) — all 6 REDACTED finding(s) are reported here at file:line but scored by D36 (supply-chain provenance), so none is charged to this dimension. — One of this dimension's main actionable groups (6 issue-level, 0 of them charged here).
  3. No action in Static Analysis (SAST) — all 4 REDACTED finding(s) are reported here at file:line but scored by D36 (supply-chain provenance), so none is charged to this dimension. — One of this dimension's main actionable groups (4 issue-level, 0 of them charged here).

Detailed fixes: d29_recommendation.md · top locations in Appendix A, every location in findings.md.

D30 · Dependency Vulnerabilities9.4 / 10Stronggated by 3 serious findings✓ Tool-verified

What it measures: Whether any dependency has a known published vulnerability (CVE), direct or transitive, in ANY ecosystem the repository declares — Dart pub, Elixir and Erlang via Hex, Go modules, Java and Kotlin via Maven/Gradle, JavaScript/npm, .NET/NuGet, PHP/Composer, Python/PyPI, RubyGems, Rust/Cargo and Swift.

Method: Dependency-CVE scan across every ecosystem the repository declares, scored ONCE. Three sources are unioned and deduplicated by advisory identity (rule id + alias closure, CVE<->GHSA) scoped to package+version, keeping the worst severity: `osv-scanner --recursive` over osv.dev for Dart pub, Elixir/Hex (and Erlang, whose `rebar.lock` syft first converts to a CycloneDX SBOM the scanner reads, with rows attributed back to the lock), Go, Java and Kotlin via Maven/Gradle (and Scala, whose sbt build's pinned direct declarations are written into a CycloneDX SBOM the scanner reads, with rows attributed back to the build file), npm, PHP/Composer, Python/PyPI, RubyGems, Rust/Cargo and Swift; `trivy fs --scanners vuln` for npm lockfiles; and `dotnet list package --vulnerable --include-transitive` for NuGet (with per-advisory collapse of the project x target-framework fan-out), plus a DECLARED-dependency arm that resolves a published gem's gemspec against rubygems.org where no Gemfile.lock is committed. `SeverityScore(c,h,m,l, normalizer 8.0)`. NotApplicable only when NO ecosystem is readable; if any applicable ecosystem could not be scanned the findings are REPORTED and the score is withheld. Supersedes the npm and OSV arms, retired 2026-09-05. Advisory since rubric-2026.11.2 (CAI decision 0006): every row is a match against a vulnerability database that changes daily, so the reading is shown and never moves a scored dimension, lens or the headline.

Maturity: Documented → Verified → Prevented · effective 9.4 / 10 · rule-coverage 100% · ceiling Documented

5 finding(s): 0 critical, 0 high, 3 medium, 0 low.

REDACTED
REDACTED
REDACTED

What to do

  1. Resolve the 2 Medium vulnerability finding(s) in Dependency Vulnerabilities — start with REDACTED (2). — One of this dimension's main actionable groups (2 warning-level).
  2. Resolve the 2 Medium advisory (unmaintained) finding(s) in Dependency Vulnerabilities — start with REDACTED (2). — One of this dimension's main actionable groups (2 recommendation-level).
  3. Resolve the 1 Medium advisory (unsound) finding(s) in Dependency Vulnerabilities — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).

Detailed fixes: d30_recommendation.md · top locations in Appendix A, every location in findings.md.

D31 · IaC & Container Security9.6 / 10Adequategated by 1 critical finding✓ Tool-verified

What it measures: Whether Dockerfiles / Terraform / Kubernetes config follow security best practices.

Method: IaC/container misconfiguration scan via trivy config (Dockerfile/Terraform/K8s/Helm/CloudFormation); severity rules to 0-10 moderate normalizer. NotApplicable without manifests. Exhaustive, deterministic.

Maturity: Documented → Verified → Prevented · effective 9.6 / 10 · rule-coverage 100% · ceiling Documented

2 finding(s): 0 critical, 1 high, 1 medium, 0 low.

REDACTED
REDACTED

What to do

  1. Resolve the 1 High IaC finding(s) in IaC & Container Security — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
  2. Resolve the 1 Medium IaC finding(s) in IaC & Container Security — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).

Detailed fixes: d31_recommendation.md · top locations in Appendix A, every location in findings.md.

D34 · Knowledge Freshness9.3 / 10Exemplary✓ Tool-verified

What it measures: Whether anyone still has living knowledge of each file, or it has been orphaned — last understood long ago by someone now gone quiet. The sibling of the bus factor: D16 asks who owns it, D34 asks whether anyone still knows it.

Method: File orphaning as total living-knowledge decay below one focused-commit's worth within a year, computed per-file from the D16 decay model. Exhaustive, deterministic over fixed history.

Maturity: Documented → Verified → Prevented · effective 9.3 / 10 · rule-coverage 100% · ceiling Documented

11 of 149 significant source file(s) are orphaned — their living knowledge has decayed to nothing, so no one currently understands them. The largest is node/bft/src/helpers/cache.rs. Counted over 149 of the 178 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.

Orphaned file · ×11node/bft/src/helpers/cache.rs:1
Orphaned files with no living knowledge

✓ On the Gold path — maintain.

Detailed fixes: d34_recommendation.md · top locations in Appendix A, every location in findings.md.

D35 · Change Coupling9.6 / 10Stronggated by 10 serious findings✓ Tool-verified

What it measures: Whether files that change together actually belong together — pairs that repeatedly co-change in git history despite having no explicit code dependency, surfacing the hidden/logical coupling (and boundaries in the wrong place) a static scan can't see.

Method: Pairwise co-occurrence over the per-commit file sets in git history (production source only — tests and generated dropped): Degree-of-Coupling = shared ÷ min individual revisions, reported above noise floors (each file ≥10 revisions, ≥5 shared commits, ≥50% strength); sweeping commits excluded. Deterministic over fixed history.

Coverage: Population: PRODUCTION source files only — test and generated files are dropped before pairing, so a class co-changing with its own test (trivially ~100%) can't drown the real production↔production coupling. Pairs ranked by Degree-of-Coupling. A non-source file is never a coupling PARTICIPANT either: documentation, schemas, config and data files are dropped with the rest, so a code↔docs pair — a command and the reference page that restates it — is not reported however strongly the two co-change; nor is coupling that runs THROUGH a build step or config file.

Maturity: Documented → Verified → Prevented · effective 9.6 / 10 · rule-coverage 100% · ceiling Documented

Strongest change-coupling: mock.rs↔prover.rs 80%; test_helpers.rs↔router.rs 68%; certificate_response.rs↔storage.rs 67%

Change coupling: mock.rs ↔ prover.rs · ×10node/bft/ledger-service/src/mock.rs:1

What to do

  1. Resolve the 10 Change coupling finding(s) in Change Coupling — start with test_helpers.rs (2), mod.rs (2), mock.rs. — One of this dimension's main actionable groups (10 warning-level).

Detailed fixes: d35_recommendation.md · top locations in Appendix A, every location in findings.md.

D36 · Supply-chain Provenance & Signing0.0 / 10Critical✓ Tool-verified

What it measures: Whether the build pipeline provides supply-chain integrity — generated provenance/attestation, signed artifacts (cosign/sigstore), an SBOM, and pinned build actions. Presence of the configuration, not a runtime guarantee.

Method: Supply-chain provenance/signing read deterministically from CI/build config (.github/workflows, .gitlab-ci.yml, azure-pipelines, Jenkinsfile, .circleci) + the release surface: four signals — generated provenance/attestation (SLSA/in-toto/actions-attest), artifact signing (cosign/sigstore/gitsign), an SBOM (syft/sbom-action/*.spdx.json/*.cdx.json), and SHA-pinned build actions — scored 10·present/denom. NotApplicable without a build pipeline. Detects configuration presence, not runtime enforcement.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

0/4 supply-chain integrity signals present (provenance, signing, SBOM, pinned actions).

REDACTED
REDACTED
REDACTED
REDACTED
REDACTED

+ 3 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

  1. Resolve the 4 REDACTED finding(s) in Supply-chain Provenance & Signing — start with REDACTED (3), REDACTED. — One of this dimension's main actionable groups (4 warning-level).
  2. Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 warning-level).
  3. Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).

Detailed fixes: d36_recommendation.md · top locations in Appendix A, every location in findings.md.

D43 · Malicious Dependencies10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether any dependency the repository declares is published as MALICIOUS rather than merely vulnerable — a package that is an attacker's work, in any ecosystem osv-scanner reads. Reported apart from D30 because the answer is binary: there is no safe version to upgrade to, and the fix is to remove the package and rotate every credential it could have read.

Method: The same dependency scan D30 reads, partitioned on the scanner's own classification rather than rescanned: a row is MALICIOUS when its id is in the `MAL-` space (the ossf/malicious-packages feed) OR its `database_specific.cwe_ids` carries `CWE-506` ("Embedded Malicious Code"). Both channels are structural; the summary text is deliberately NOT read, because a malicious-package record whose summary says only "Critical severity vulnerability" is a real shape ([GHSA redacted]) and a text matcher misses it. Scored BINARY: any surviving row is 0, whatever its severity and however many CVEs sit beside it — a hostile dependency is not a quantity. Applicability and degradation are D30's: NotApplicable only when no ecosystem is readable, and an unscannable ecosystem degrades rather than reading clean. Advisory since rubric-2026.11.2 (CAI decision 0006): the malicious-package feed is a database that changes daily, so the reading is shown and never moves a scored dimension, lens or the headline.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No dependency in any ecosystem this repository declares is published as malicious.

✓ On the Gold path — maintain.

Detailed fixes: d43_recommendation.md.

D44 · Platform End-of-Life6.0 / 10Adequate✓ Tool-verified

What it measures: Whether anyone still ships security patches for the platform this repository RUNS ON — the runtime it pins and the framework majors its own constraints hold it to. Separate from D12 because the question differs: a current Django on an end-of-life Python is perfectly up to date and completely unsupported, and the fix is a migration rather than a version bump. What the repository says it merely SUPPORTS is never charged.

Method: End-of-life PLATFORM read from the repository's own declarations and graded against a FROZEN, dated table of vendor support dates — no network, no feed, no API, so this dimension answers identically inside a closed scan fence. Two subjects: a RUNTIME the project pins (a single or all-end-of-life TargetFramework, a .nvmrc or .python-version, a requires-python CAP) and a FRAMEWORK major a dependency constraint cannot move off (a caret, tilde or exact version; `vue@^2.7.16` pins Vue 2). A FLOOR is deliberately never charged — `requires-python = ">=3.8"` states what a package SUPPORTS, not what it runs on — and a multi-target project is charged only when EVERY target is out of support. Runtime 4.0/product capped 8.0, framework 1.5 capped 4.5. The table is safe to freeze because a statement about support that ended in the past cannot become false: it loses recall as it ages, never precision, and a test asserts every entry predates the freeze date. Disjoint from D31 (a container image's OS layer) and D29 (the toolchain a CI workflow installs). Abstains when the repository declares no platform this pass reads — never scores it clean.

Maturity: Documented → Verified → Prevented · effective 6.0 / 10 · rule-coverage 100% · ceiling Documented

1 end-of-life runtime(s) and 0 end-of-life framework(s), read from 2 platform declaration(s) and 0 dependency declaration(s). This dimension reads what the repository says about ITSELF — a pinned target framework, a version file, a capped requires-python, a Rust toolchain pin, a framework major a constraint cannot move off. A FLOOR is deliberately never charged: `requires-python = ">=3.8"` states what the package SUPPORTS, not what it runs on, and a well-maintained library declares exactly that while running its own CI on a current release. The end-of-life facts are FROZEN and dated, so this dimension needs no network and answers identically inside a closed scan fence; as the table ages it loses recall and never precision, because a statement about support that ended in the past cannot become false. The OS layer of a container image is D31's question and the toolchain a CI workflow installs is D29's; this row is neither.

End-of-life runtime: Rust 1.96rust-toolchain.toml:1

What to do

  1. Resolve the 1 End-of-life runtime finding(s) in Platform End-of-Life — start with rust-toolchain.toml. — One of this dimension's main actionable groups (1 warning-level).

Detailed fixes: d44_recommendation.md · top locations in Appendix A, every location in findings.md.

Frontend & cross-cutting dimensions

R = React/JS · M = Maturity · P = Readiness.

AX10 · Code composition9.6 / 10Exemplary✓ Tool-verified

Other · Architecture — How the codebase splits by code ROLE — domain, application, infrastructure, test, generated. The significance map behind the knowledge/coupling weighting, and a DDD signal in its own right: a thin domain core under fat infrastructure is the anemic-domain smell, quantified. How each file's role is decided, because the split is only as good as that: a generated name or a build-output tree makes it Generated, a test project makes it Test, and otherwise the file's NAMESPACE and PATH words are matched against fixed vocabularies in a fixed ORDER — domain, then infrastructure, then application — so a file whose words hit two layers is counted under the earlier one. A production file matching none of them counts as application, so that share reads 'application or unclassified' rather than a measured application layer. Roles come from naming convention, never from what the code does. On this repository the split was taken from the source tree on disk rather than from a loaded .NET workspace, so a file's role is decided by its PATH segments alone — no declared namespace was available to add to the evidence — and generated output is excluded from the census entirely rather than counted as a generated share.

Method: Roslyn line-count by code ROLE: every source file classified Domain/Application/Infrastructure/Test/Generated by namespace + path convention (the shared CodeRoleClassifier), then significant lines summed per role. Deterministic; the advisory score is the business-logic (domain+application) share of production code.

Coverage: Population: ALL source files, each bucketed into ONE of five roles (Domain/Application/Infrastructure/Test/Generated) by namespace + path convention — a file whose layer isn't named in the convention falls to Application (the neutral default), and the split is line-count, not semantic depth or business value.

AX3 · Project dependency cycles10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether the project-reference graph is acyclic (cycles block independent build/deploy and signal eroding boundaries).

Method: Project reference cycles via elementary-DFS over real .csproj references, using the engine shared with D5/D7; cyclic versus acyclic. Exhaustive, deterministic.

AX4 · Dependency direction10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether dependencies point inward (Domain ← Application ← Infrastructure/Web) — the clean-architecture dependency rule, checked across the project graph.

Method: Layer violations by name-segment inference (Domain/Core to Application to Infrastructure/Web) over the project-reference graph. Exhaustive over all projects, deterministic.

AX9 · CQS / query purity10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether read (query) handlers stay side-effect-free — a query that writes persistent state or raises events breaks CQS and makes reads unsafe to retry, cache, or route to a read replica.

Method: Roslyn scan: CQRS handlers classified query-vs-command by interface (IQueryHandler/ICommandHandler/IRequestHandler<TQuery,TResult>) and name convention (*Query/Get*/Find* vs *Command); each query handler's body checked for persistent-state writes (SaveChanges/repository Add-Update) or event publishes by resolved invocation. Deterministic, type-level, exhaustive over the detected handlers.

Coverage: Population: CQRS handlers identified by IQueryHandler/ICommandHandler/IRequestHandler interface + *Query/Get*/Find*/*Command NAME convention; query purity then checked exhaustively within that set — a query handler using neither convention is invisible, and mutation is a resolved persistence/publish CALL, not full dataflow.

C2 · Access Controls10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether access is authorized by default — a framework authorization attribute/decorator or policy, or imperative guard methods (throw-on-violation) called from handlers.

Method: Roslyn scan: [Authorize] usage and authorization policies, plus imperative throw-on-violation guard methods detected via syntax. Deterministic.

ES2 · Immutable events1.0 / 10Critical✓ Tool-verified

Other · Event Sourcing — Whether domain events stay immutable (private fields, set once) rather than carrying mutable state.

Method: Roslyn scan (event-sourcing gated): persisted events checked for public setters; immutability verified per property/field. Deterministic, hard fact.

  • `Event` conforms to a domain-event contract but carries a freely-mutable `pub` field. Events are immutable facts — model them with private fields (set once in the constructor) so a recorded event can never be rewritten. — node/bft/events/src/lib.rs:97
M1 · Documentation (README)8.7 / 10Strong✓ Tool-verified

Maturity · Maturity — Whether the repository and its projects have a README, and whether it is substantive.

Method: Filesystem scan: README presence, word count, and headings for depth; git history for staleness. Exhaustive across root and project dirs, deterministic.

What to do

  • Explain in the README how to run the tests. Add a section called Testing to the README in the repository's top folder, saying how to run the test suite.
M2 · Architecture documentation0.0 / 10Critical✓ Tool-verified

Maturity · Maturity — Whether key decisions (ADRs) and the high-level shape (C4/diagrams) are written down.

Method: Filesystem scan: ADR folder/naming conventions or content, plus Mermaid/PlantUML/C4/architecture.md discovery. Exhaustive, deterministic.

  • No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
  • No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.

What to do

  • Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
  • Add a C4 context/container diagram (Structurizr, PlantUML or Mermaid) or an architecture.md overview.
M3 · Folder & project structure10.0 / 10Exemplary✓ Tool-verified

Maturity · Maturity — Whether the repository is organised deliberately: production code and tests are set apart in a way its ecosystem or the repository itself declares.

Method: Filesystem scan: src/test folder separation and namespace-prefix consistency (majority RootNamespace agreement). Exhaustive across projects, deterministic.

M4 · Documentation accuracy10.0 / 10Exemplary○ Nothing flagged

Maturity · Maturity — Whether the project's current-state documentation describes the code that exists.

Method: Every current-state document's checkable claims looked up in the tree (links, versions, and artefact counts an order of magnitude off), plus two README checks: an advertised infrastructure product with no footprint, and a module the CHANGELOG records as removed. Deterministic, no model. Advisory.

P1 · CI/CD gates10.0 / 10Exemplary○ Nothing flagged

Readiness · Readiness — Whether an automated pipeline builds and tests every change.

Method: Filesystem scan: CI workflow files (.github/workflows, .gitlab-ci.yml, etc.) for build and test stages. Exhaustive, deterministic.

P10 · Library API & versioning10.0 / 10Exemplary○ Nothing flagged

Readiness · Readiness — For a library: a deliberate (small) public API surface and explicit semantic versioning so consumers can depend on it safely.

Method: Roslyn scan: public API surface area and semantic-versioning markers (SemVer attributes, changelog entries) for libraries; off .NET, a library is the ecosystem's publication act (an npm package that is not private and names an entry point, a PyPI distribution with a build system, a Rust library crate, a Maven/Gradle module that publishes, a Go module with no package main, a gemspec, a Composer library, a SwiftPM library product, a pub.dev or Hex package), its surface is the share of types the language's code model records as public (Rust, Swift, Java, Kotlin, Go, Dart; not measured where the model records no type visibility or, as in TypeScript, only module-level export), and its version is read from the manifest, a semver CHANGELOG, release tooling or semver git tags. Exhaustive, deterministic.

P2 · Observability8.0 / 10Strong✓ Tool-verified

Readiness · Readiness — Whether the code is diagnosable in production — structured logging, tracing/metrics, health checks.

Method: Filesystem/Roslyn scan: structured-logging frameworks (Serilog, NLog), OpenTelemetry, and health-check endpoint patterns. Exhaustive, deterministic.

P3 · Security & performance tooling8.0 / 10Strong✓ Tool-verified

Readiness · Readiness — Whether SAST, secret/dependency scanning and performance benchmarking are wired in (presence, not runtime).

Method: Filesystem scan: SAST configuration, dependency-update automation, secret scanning, and a benchmark harness or benchmark step — in this repository's own ecosystem. Exhaustive, deterministic.

What to do

  • Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
P4 · Deployment & Rollback7.0 / 10Strong✓ Tool-verified

Readiness · Readiness — Whether releases are automated and safely reversible (probes, rolling updates, approval gates) — from manifests/pipeline files, not the live environment.

Method: Filesystem scan: deployment manifests/IaC (K8s YAML, Helm, Terraform) for rolling updates, probes, approval gates, migration hooks. Exhaustive, deterministic.

  • Deployment is orchestrated by compose, but no service declares a `healthcheck:` and nothing pins a previous image to fall back to — the runtime can tell that the container is up, not that it is serving, so a bad release is harder to detect and reverse.

What to do

  • Add a `healthcheck:` to the served compose service — probing the endpoint it already answers on where it has one — with `depends_on: condition: service_healthy` on whatever waits for it, and keep the deployed image tag immutable and recorded so rolling back is re-pointing at the previous tag rather than rebuilding.
P6 · Release Hygiene5.0 / 10Adequate✓ Tool-verified

Readiness · Readiness — Whether releases are traceable — a maintained changelog and explicit version stamping.

Method: Filesystem scan: changelog file presence and version tags in csproj or git tags. Exhaustive, deterministic.

  • No CHANGELOG/HISTORY/RELEASES file — what shipped when isn't easy to reconstruct for support or audit. (Versioning/tagging makes releases traceable, but a changelog records the what.)

What to do

  • Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release.
P7 · Outbound HTTP resilience3.0 / 10Weak✓ Tool-verified

Readiness · Readiness — Whether outbound HTTP calls are wrapped in resilience (retry/timeout/circuit-breaker) so a failing dependency doesn't cascade.

Method: Source scan: outbound HTTP clients and what bounds them — resilience handlers (Polly, AddStandardResilienceHandler) on .NET; on Go, the JVM, Python, JavaScript/TypeScript, Ruby, PHP, Rust, Elixir, Swift, Dart and Erlang, a timeout, deadline, retry or breaker beside each call, or a process-wide client default (a framework-wide deadline such as Drupal core's, Laravel's or actix's awc counts). Exhaustive, deterministic.

  • `ureq::post(` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout. — cli/src/commands/developer/mod.rs:314
  • `ureq::get(` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout. (×4) — cli/src/commands/developer/mod.rs:330, cli/src/commands/developer/mod.rs:347, cli/src/commands/developer/scan.rs:156, …
  • `Client::builder()` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout. — node/cdn/src/blocks.rs:65
  • `reqwest::Client::new(` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout. — node/src/bootstrap_client/mod.rs:100

What to do

  • Give every client a whole-request bound: `reqwest::Client::builder().timeout(Duration::from_secs(10))` (never `reqwest::get` or `Client::new()`, which have none), ureq's `timeout_global`, or wrap the call in `tokio::time::timeout`; add retry with back-off (`reqwest-retry`'s `RetryTransientMiddleware`, `backoff`) around dependencies that fail.
PF1 · Benchmark discipline9.0 / 10Exemplary✓ Tool-verified

Readiness · Performance — Whether the code protects its performance with benchmarks — a benchmark suite, allocation/memory measurement, and (ideally) a CI gate. Presence is credited as a bonus, never a deduction.

Method: Repo + source scan: BenchmarkDotNet referenced (csproj/source), [Benchmark]/[MemoryDiagnoser] attribute counts, and a benchmark step in CI; off .NET, the same ladder over Go testing.B, Rust criterion/#[bench]/divan, JMH/kotlinx-benchmark, pytest-benchmark/asv/pyperf, tinybench/mitata/vitest bench/benchmark.js and Swift package-benchmark — scored as a bonus ladder (absence is neutral, never a deduction). Deterministic, presence detection.

PF3 · Async & latency hygiene8.5 / 10Strong✓ Tool-verified

Readiness · Performance — Whether asynchronous code stays responsive — it avoids sync-over-async blocking (a .NET .Wait()/.GetAwaiter().GetResult(), a time.sleep or blocking HTTP call inside a Python coroutine, a *Sync call inside an async JavaScript function, block_on inside a Rust async fn, runBlocking inside a Kotlin suspend function, block() inside a Reactor publisher) that stalls a thread or event loop and risks deadlock, and, where the code is a reusable library on .NET, awaits with ConfigureAwait(false) so it never captures and stalls its caller's context.

Method: Production-source scan: sync-over-async blocking counted everywhere — .Wait()/.GetAwaiter().GetResult() in .NET; off .NET, read from each language's code model, a blocking call inside an async function (Python, TS/JS, Rust, Kotlin, Swift, Dart) or inside a Java method returning a Reactor Mono/Flux or a Scala method returning a Future or effect — and, for a .NET library with ≥5 awaits, the share of awaits using ConfigureAwait(false). Deterministic, syntax/text detection.

  • `run_fast_sync` is async and calls thread::sleep — a blocking call inside async code stalls the executor thread, and every task scheduled on it for as long as it runs. — ledger-distribution/src/main.rs:119

What to do

  • Rust: `.await` the future instead of `block_on` (on a Tokio runtime thread it panics outright) and use `tokio::time::sleep(..).await` instead of `std::thread::sleep`; where synchronous code must run, move it to `tokio::task::spawn_blocking` or `block_in_place`.
S1 · Web-Security Posture6.0 / 10Adequate✓ Tool-verified

Other · Security — Read from this repository's Rust source: cryptographic hygiene (weak hash or cipher, key material fixed in the source) and outbound TLS (certificate validation, protocol version) — facts about code that hold whether or not it serves anything itself. This repository serves HTTP itself (`axum::serve(` (node/rest/src/lib.rs:519)), so its Rust source was also read for the server controls: TLS served or HSTS set, security response headers, cookie flags and inbound validation — each credited where its Rust spelling appears in production source, not proven on every route. A Rocket 0.5 application is credited the headers Rocket's default `Shield` sends unless it attaches its own, and its cookie jar's SameSite=Strict default; a session middleware its default cookie flags.

Method: Roslyn plus filesystem scan: HSTS/security headers, secure cookies, input validation, middleware order, weak crypto (MD5/SHA1/DES); HTTPS-metadata context-aware. On a repository with no .NET source it reads JavaScript/TypeScript, Dart, Ruby, Scala, Rust or Elixir source itself (test, vendored, generated and minified paths not) for the arms that hold whether or not the code serves HTTP: a weak hash or cipher, key material fixed in the source, a TLS client that accepts any certificate, and (JavaScript/TypeScript, Ruby, Scala, Rust and Elixir) an obsolete TLS version; the server controls are not assessed there, and a Dart, Ruby, Scala, Rust or Elixir repository that serves no HTTP of its own is N/A on them. Deterministic.

  • This repository starts an HTTP server and nothing in its Rust source or committed `Rocket.toml` secures the transport: no TLS served (actix-web `bind_rustls`/`bind_openssl`, axum-server `bind_rustls` with a `RustlsConfig`, tonic `ServerTlsConfig`, a `TlsAcceptor`, Rocket's `[default.tls]`), no `Strict-Transport-Security` header, no `X-Forwarded-Proto` read from a TLS-terminating proxy — so its traffic may cross the network in clear text. (−2.0 on this card.) The server: `axum::serve(` (node/rest/src/lib.rs:519).
  • None of the 11 security response headers the OWASP Secure Headers Project recommends (Content-Security-Policy, Strict-Transport-Security, X-Content-Type-Options, X-Frame-Options, …) is set on a response this repository's Rust server sends — defense in depth, even when a proxy could set them. (−2.0 on this card.) The server: `axum::serve(` (node/rest/src/lib.rs:519).

What to do

  • Secure the server's transport: serve TLS itself (`HttpServer::bind_rustls_0_23(addr, config)` in actix-web, `axum_server::bind_rustls(addr, RustlsConfig::from_pem_file(…))`, tonic's `Server::builder().tls_config(ServerTlsConfig::new().identity(…))`, Rocket's `[default.tls]`), or run it behind a TLS-terminating proxy and check `X-Forwarded-Proto`; send `Strict-Transport-Security` once it is HTTPS-only.
  • Set security response headers on what the server sends — actix-web's `DefaultHeaders::new().add((header::X_CONTENT_TYPE_OPTIONS, "nosniff"))`, tower-http's `SetResponseHeaderLayer::overriding(…)` on an axum router, or keep Rocket's default `Shield` — with `Content-Security-Policy`, `X-Content-Type-Options` and a frame policy on every response.
X1 · Async correctness7.9 / 10Strong✓ Tool-verified

Other · Code Health — Whether the code avoids sync-over-async (deadlock-prone blocking on tasks) and async void.

Method: Roslyn syntax scan: async methods scanned for .Wait()/.GetAwaiter().GetResult() and async-void outside event handlers. Deterministic, hard fact per invocation.

  • This `async` body is polled on an executor's worker thread, and `std::thread::sleep` blocks that thread: for the whole delay no other task scheduled on it makes progress — the Rust form of blocking on a task. Use `tokio::time::sleep(…).await` (or the runtime's own timer), which suspends only this task. Where the blocking work is not a sleep but a synchronous call that cannot be made async, move it off the executor with `tokio::task::spawn_blocking(…).await`. — ledger-distribution/src/main.rs:146

What to do

  • Blocking `thread::sleep` inside an `async` body
X14 · Bypassable address classification10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether a hand-rolled public/private IP check can be walked past — a method that unwraps IPv4-mapped IPv6 but returns the opposite verdict for the same host written as IPv4-compatible, 6to4 or NAT64.

Method: Roslyn syntax + semantics: methods that unwrap IPv4-mapped IPv6 and hand-roll IPv4 range carve-outs, checked for whether the IPv6 branch also accounts for the IPv4-compatible, 6to4 and NAT64 embeddings. Deterministic, provable per finding. Advisory.

X15 · Unvalidated length from an untrusted reader10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether a length read out of the stream being parsed is bounded before it is allocated or read — an unchecked count taken from the input lets the input choose the allocation.

Method: Roslyn syntax + semantics: integer lengths read from a BinaryReader and spent on a bulk read or an array allocation, checked for any comparison or bounding call on the value anywhere in the method. Deterministic, provable per finding. Advisory.

X21 · Side-effecting pattern guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a `when` guard is free of side effects — a guard that increments a counter or assigns while deciding whether its arm matches applies that change during PATTERN MATCHING, on an arm that may not be selected, and skips it entirely when a short-circuit to its left answers first.

Method: Roslyn syntax: `when` guards on case labels and switch-expression arms, read for a mutation (`++`/`--`/assignment) sitting in a position the guard's own `&&`/`||`/`??`/`?:`/`?.` can skip. Deterministic, provable per finding. Advisory.

X30 · Support guard that admits what it rejects10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a guard written as a NEGATED `||` says what its author meant — `!(a || b || x != k)` is `!a && !b && x == k` by De Morgan, so a bail-out that mixes capabilities the code needs with a fault it refuses turns inside out: it fires only where the capabilities are ABSENT, and lets every value the fault term names walk straight into the body that cannot handle it.

Method: Roslyn syntax only, no semantic model: every logical-not whose operand is a parenthesised `||` chain of two or more disjuncts, flattened (a left-nested `a || b || c` read once would see `(a || b)` as one disjunct). A site enters the population on that shape alone. A finding additionally needs the disjuncts to DISAGREE in polarity: at least one bare boolean read — an identifier or member access, never an invocation, which is a predicate rather than a capability flag — and at least one `x != <constant>`, the only form that negates into an exact-value pin (`== null` negates into a looser requirement and is outside the fault set). Consistently-polarised disjunctions, all-fault or all-capability, are counted and never reported; a negated `&&` is outside the population entirely. No same-receiver gate: it was measured to cost a real defect and remove no false positive. Deterministic, provable per finding. Advisory.

X4 · Structured logging2.0 / 10Critical✓ Tool-verified

Other · Code Health — Whether log calls use message templates (queryable) rather than interpolated strings.

Method: Roslyn syntax scan: every log call-site counted; interpolated-string first-argument violations flagged. Population is all log calls, not estimated. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `trace`/`debug`/`info`/`warn`/`error`/`fatal`/`verbose`/`silly`/`http`/`log` call on a receiver named for a logger, in a package whose own or an enclosing `package.json` declares a logger that carries values as fields (pino, pino-http, nestjs-pino, Fastify, winston, bunyan, tslog, LogTape, roarr), whose first deciding argument is a template literal with substitutions; an object-literal fields argument is stepped over, a plain string message clears the call. Python is read the same way: a `debug`/`info`/`warning`/`error`/`exception`/`critical`/`log` call on a logger in a file that imports the standard library’s `logging` or structlog (loguru, which formats at the call, is not judged), whose message is a whole f-string with a non-constant field; a `%`-formatted, `.format()`-ed or concatenated message is not convicted, as in C#. PHP is read the same way: a PSR-3 level call (`emergency`…`debug`, `log`) on a logger (`$logger`, `$this->logger`, Laravel’s `Log::`, `logger()`, `\Drupal::logger()`) in a package whose `composer.json` requires a PSR-3 logger or a framework that hands one out (psr/log, Monolog, Laravel, Symfony, Drupal, CakePHP), or a file that imports one, whose message is a double-quoted string interpolating a variable; a single-quoted message clears the call, and `sprintf` or `.` concatenation is not convicted, as in C#. Dart is read the same way: a `trace`/`debug`/`info`/`warn`/`error`/`fatal` call on Sentry’s structured logger (`Sentry.logger`) whose message is a whole string literal interpolating a value (`$name`, `${…}`); the `Sentry.logger.fmt` template API clears the call. Dart that logs only through loggers with one message and no fields (package:logging, package:logger, talker, dart:developer) is not applicable rather than a reach gap. Ruby is read the same way: a `trace`/`debug`/`info`/`warn`/`error`/`fatal` call on the console gem’s `Console` (declared by a Gemfile, gemspec or Gemfile.lock, or required) or, where SemanticLogger, Ougai or dry-logger is declared or required, on a receiver named for a logger (`logger`, `@logger`, `Rails.logger`, `log`), whose first deciding argument is, as the whole argument, a double-quoted string interpolating a non-constant value (`#{…}`, `#@ivar`); a plain literal clears the call, keyword arguments are the fields, and a block, `%`-format or `+` concatenation is not convicted. Ruby that logs only through the standard Logger (Rails.logger) is not applicable rather than a reach gap. Deterministic.

  • `error!` at line 134 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — utilities/src/signals.rs:134
  • `error!` at line 162 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — utilities/src/signals.rs:162
  • `debug!` at line 65 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. (×2) — snarkos/main.rs:65, node/tcp/src/protocols/handshake.rs:65
  • `info!` at line 99 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — snarkos/main.rs:99
  • `debug!` at line 107 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — snarkos/main.rs:107
  • `error!` at line 170 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — snarkos/main.rs:170
  • `error!` at line 307 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:307
  • `trace!` at line 315 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:315
  • `debug!` at line 320 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:320
  • `error!` at line 342 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:342
  • `error!` at line 351 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:351
  • `debug!` at line 401 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:401
  • `debug!` at line 406 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:406
  • `warn!` at line 408 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:408
  • `debug!` at line 467 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:467
  • `error!` at line 472 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:472
  • `debug!` at line 482 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:482
  • `debug!` at line 489 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:489
  • `warn!` at line 498 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:498
  • `error!` at line 505 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:505
  • `debug!` at line 522 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:522
  • `debug!` at line 525 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:525
  • `error!` at line 538 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:538
  • `warn!` at line 568 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:568
  • `warn!` at line 571 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:571
  • `warn!` at line 581 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:581
  • `debug!` at line 615 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/tcp.rs:615
  • `debug!` at line 74 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/protocols/handshake.rs:74
  • `error!` at line 165 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/protocols/reading.rs:165
  • `error!` at line 226 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/protocols/reading.rs:226
  • `trace!` at line 280 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/protocols/reading.rs:280
  • `warn!` at line 321 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/protocols/reading.rs:321
  • `error!` at line 130 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/protocols/writing.rs:130
  • `error!` at line 161 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/protocols/writing.rs:161
  • `trace!` at line 252 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/protocols/writing.rs:252
  • `error!` at line 255 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/tcp/src/protocols/writing.rs:255
  • `trace!` at line 467 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/sync/src/block_sync.rs:467
  • `warn!` at line 479 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/sync/src/block_sync.rs:479
  • `debug!` at line 485 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — node/sync/src/block_sync.rs:485

What to do

  • Interpolated log message defeats structured logging

Reference — by lens

The score is the rank-weighted fold of these lenses (worst-heaviest), each including its meta-dimensions; a lens with a Critical contributor is capped at Fair (its band reads "gated by …") and is never the strongest area however high its average.

LensScoreRatingImpact
Code Health60%Adequate — gated by X4Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Architecture96%ExemplaryStrongest area.
Maturity63%Adequate — gated by M2Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Readiness60%Adequate — gated by P7Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Security61%Adequate — gated by D28, D36Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Event Sourcing10%Critical — gated by ES2Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Performance87%StrongSolid.
Unscored — 4 check(s) recorded observations but carry no score

These checks ran and found something, but they do not carry a score — either by design (an advisory check reports evidence rather than grading it) or because they could not be scored here. They are excluded from the score for that reason, not because there was nothing to see.

  • AXH1 Runtime security headers — 11 observation(s) recorded · Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • AXI1 Runtime container hardening — 1 observation(s) recorded · Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • AXR1 Runtime accessibility (rendered) — 2 observation(s) recorded · Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • X10 Duplicated predicate — 3 observation(s) recorded · Advisory — this card reports evidence and never carries a score.
Not evidenced — 4 control(s) we could not find positive evidence for

These checks grade a working control, and the repository shows no evidence of one. That is deliberately not scored as a zero: a repository cannot show an ops runbook, a database TTL or an infrastructure-side audit log, so absence of evidence here is not evidence the control is missing. It is also not a statement that the check is irrelevant to this codebase — the thing it grades applies; we just could not see it. Excluded from the score either way.

  • C3 Audit Trail — Not assessed: this repository stores data through 'rocksdb' (node/src/node.rs:38) but declares no persisted model this check reads (Diesel table! columns, SeaORM entity / Diesel model / sqlx FromRow struct fields, CREATE TABLE and ALTER TABLE … ADD columns in SQL migrations and SQL string literals). Personal data may be written through raw SQL or a hosted backend, so whether its changes need an audit trail could not be established, and the trail's absence is not scored.
  • C4 Data Retention — Not assessed: this repository stores data through 'rocksdb' (node/src/node.rs:38) but declares no persisted model this check reads (Diesel table! columns, SeaORM entity / Diesel model / sqlx FromRow struct fields, CREATE TABLE and ALTER TABLE … ADD columns in SQL migrations and SQL string literals). Personal data may be written through raw SQL or a hosted backend, so whether a retention limit applies here could not be established, and its absence is not scored.
  • C5 Data-Subject Rights — Not assessed: this repository stores data through 'rocksdb' (node/src/node.rs:38) but declares no persisted model this check reads (Diesel table! columns, SeaORM entity / Diesel model / sqlx FromRow struct fields, CREATE TABLE and ALTER TABLE … ADD columns in SQL migrations and SQL string literals). Personal data may be written through raw SQL or a hosted backend, so whether data-subject rights apply here could not be established, and their absence is not scored.
  • P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
Not included — 64 check(s) not relevant to this codebase

These checks had nothing to measure here (no tests, no git history, the codebase is small, or the architecture style doesn't apply), so they're omitted above rather than scored low.

  • AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
  • AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
  • AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
  • AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
  • AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
  • AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
  • AX1 Captive dependencies — Not applicable: Rust with no dependency-injection crate has no container to hand one lifetime's instance to another — every value is owned by the code that builds it, and the borrow checker rejects a longer-lived value keeping a borrow of a shorter-lived one.
  • AX2 Stateful singletons — No container singleton was found, so there is no shared instance for concurrent requests to race on. No function in this Python code is served by a threaded web framework (a Flask, Bottle or FastAPI route, a Django or Pyramid view), so no module is shared between request threads. Rust's compiler refuses unsynchronised shared mutation — a value shared across threads must be Sync — so the race this check looks for cannot be written.
  • AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • AX6 Interface segregation — not assessed — interface segregation is computed over a type surface that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • AX7 Slice cohesion — not applicable — not a vertical-slice architecture
  • AX8 Test isolation — no test/production split to check
  • AXA1 Runtime unauthenticated reachability — This run crawled public routes only — it had no logged-in session, so there is no authenticated surface to compare anonymous access against and nothing was measured. This is a statement about this run, not about your application: nothing here says access control is missing, and nothing here says it is present.
  • AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • AXS1 Runtime exposed surface — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • C1 Data Protection — Not assessed: this repository stores data through 'rocksdb' (node/src/node.rs:38) but declares no persisted model this check reads (Diesel table! columns, SeaORM entity / Diesel model / sqlx FromRow struct fields, CREATE TABLE and ALTER TABLE … ADD columns in SQL migrations and SQL string literals). Personal data may be written through raw SQL or a hosted backend, so the absence of a personal-data field here is not evidence that none is stored, and encryption at rest is not scored over a subject that could not be established.
  • D10 Test Quality — ~5670 lines of test source are present (.rs) but no test cases reached the test census for this repository — no test root we could resolve declared them, or the files we read declare no cases in a test framework we recognise — so skipped/assertion-free tests couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
  • D11 Test Reliability — Test reliability not included — the .rs suite was found but not re-run
  • D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
  • D21 Naming Consistency — Naming consistency does not read html yet; not measured.
  • D22 Internal API Consistency — API consistency is measured on C# only; the exposed Rust surface was not measured.
  • D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ sibling projects each declaring an entity of their own or taking another project's integration events. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
  • D24 Comment Value — D24 reads C#, Visual Basic, TypeScript and JavaScript comments only — this repository's production source is .rs, which was left unread. Not scored: this is a gap in the analyzer, not a verdict about this repository.
  • D25 ADR Conformance — no ADRs to check
  • D27 Navigability — D27 counts a call into the standard library or a dependency as unresolved for this repository's language (.rs), so too few call sites counted as resolved to assess navigability. Not scored: this is a gap in the analyzer, not a verdict about this repository.
  • D32 Data Compliance (PII/GDPR) — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.
  • D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
  • D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
  • D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
  • D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
  • D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
  • D8 Code Coverage — Coverage not measured — Rust suite
  • DM1 Domain Modelling — applicable but not scored (2 of 3 signals for this style — below the bar we score at): 6 value object(s); 1 domain event(s); its domain events are published by services or handlers — no domain entity raises one
  • ED2 Event/command shape — not scored — deciding whether a command has more than one competing handler requires resolving the call graph, and a call made through an inferred or generic receiver has no resolvable owner in the source. Reported as guidance rather than measured
  • ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
  • ES1 Fold determinism — not applicable — the code was read and holds no event-replay fold, so there is nothing for this check to judge
  • GD1 Unfinished & placeholder code — no source files were read — this check reads C#, F#, JavaScript/TypeScript, Dart, Ruby and Scala, and none was read for this repository's product. That is a limit of the analyzer, not a finding about your code.
  • IC1 Incompleteness & stubs — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • P12 CI test-gate honesty — Reported, not scored — this card publishes what the CI gate does with the test inventory rather than grading it. The findings above are its output.
  • P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
  • P9 Domain vs controller coverage — coverage not measured: this check compares the coverage of the analyzer's own test run across the domain and web layers, and that run measured none here — Test coverage (D8) says why
  • PF2 Allocation hygiene — Not scored: this check counted allocation-aware idioms (Span, pools, stackalloc) per line, which describes what kind of code a repository is rather than whether it has an allocation problem, so it was withdrawn. Nothing here is a finding about your code.
  • X12 Unreachable branch — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X13 Undrained process stream — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X16 Unfloored truncation loop — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X17 Uncapped recursion over a caller-supplied document — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X18 Disposal-pattern correctness — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X19 Unrestored process-global state — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X2 Cancellation propagation — no C# was loaded; this repository's Rust was read, and no request in it can be cancelled by a caller — a Rust request takes no token: a future is cancelled by dropping it, from outside the call (select!, a timeout, an aborted task), and reqwest, hyper and tonic take none
  • X20 Mistyped argument guard — This check asks whether an argument guard reports an EMPTY value as a NULL one, which needs a language that throws a null-specific argument exception — .NET's ArgumentNullException, the JVM's NullPointerException, Dart's ArgumentError.notNull. This repository contains none of those languages: the ones it is written in have a single exception for a bad argument, so there is no pair of exceptions to confuse and nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
  • X22 Contradicted release guard — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X23 Unguarded diagnostic materialisation — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X24 Document value interpolated into markup unescaped — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X25 Inert configuration knob — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X26 Unsynchronised callback handoff — Not applicable: this check looks for a collection written by a callback on one thread while the body waiting on it touches it on another, and in this repository's languages no collection is reachable from two threads at once. Rust's compiler refuses the unsynchronised version: a collection shared between a callback's thread and the waiting body must be `Sync`, which a `Vec`, `VecDeque` or `HashMap` is only behind a `Mutex`/`RwLock`, so the race this check looks for cannot be written in safe Rust. Not a gap in the analyzer and not a finding about your code.
  • X27 Collection changed while being enumerated — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
  • X28 Index access outside its own emptiness guard — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
  • X29 Per-element action decided by a fixed element — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
  • X3 Exception handling — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
  • X5 Nullable reference types — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • X7 Silent fallback defaults — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.

Appendix A — Findings (grouped)

The findings behind the scores, grouped by severity, then by dimension and kind. The high-severity issues are enumerated in full below; items per group are capped at 25 with any overflow stated explicitly per group, never silently truncated. The complete machine-readable list of every finding (all severities) is the companion findings.md in this report's bundle.

Critical — 32 finding(s)
D28 · Secrets (history) · REDACTED · ×15
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D13 · REDACTED Scanning · Leaked secret · ×1
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED · ×1
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED · ×1
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED · ×1
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED · ×1
  • REDACTED
D31 · IaC & Container Security · High IaC · ×1
  • REDACTED
ES2 · Immutable events · Mutable domain event · ×1
  • Mutable domain event: Event node/bft/events/src/lib.rs:97 — `Event` conforms to a domain-event contract but carries a freely-mutable `pub` field. Events are immutable facts — model them with private fields (set once in the constructor) so a recorded event can never be rewritten.
Serious — 296 finding(s)
D17 · Explicit Debt · TodoComment · ×60
  • TodoComment node/tests/common/test_peer.rs:155 — // TODO(nkls): add assertions on the contents of messages. — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/tcp/src/tcp.rs:94 — /// TODO(kaimast): (some of) these should be treated with higher severity, as they indicate a bug or corrupted state, — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/tcp/src/tcp.rs:305 — // TODO(nkls): maybe this first check can be dropped; though it might be best to keep just in case. — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/sync/src/block_sync.rs:78 — // TODO(kaimast): base rate limits on how many requests were sent to each peer instead. — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/sync/src/block_sync.rs:415 — // TODO: generalize this for RECENT_INTERVAL > 1, or remove this comment if we hardwire that to 1 — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/sync/src/block_sync.rs:690 — // TODO(kaimast): remove this eventually. — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/sync/src/block_sync.rs:917 — /// TODO (howardwu): Remove the `common_ancestor` entry. But check that this is safe — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/sync/src/block_sync.rs:1148 — /// TODO(kaimast): remove this public function once the sync logic is fully unified `BlockSync`. — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/sync/src/block_sync.rs:1458 — // TODO: Uncomment this when we have a more rigorous analysis and testing of peer banning. — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/sync/src/block_sync.rs:1492 — // TODO (howardwu): Change this to the highest cumulative weight for Phase 3. — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/sync/src/block_sync.rs:1602 — // TODO (howardwu): Consider performing an integrity check on peers (to disconnect). — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/sync/src/ping.rs:38 — /// TODO (kaimast): maybe keep track of the last ping too, to not trigger spam detection? — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/sync/locators/src/block_locators.rs:108 — // TODO (howardwu): Consider using `BTreeMap::from_par_iter` if it is more performant. — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/sync/locators/src/block_locators.rs:216 — // TODO: generalize check for RECENT_INTERVAL > 1, or remove this comment if we hardwire that to 1 — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/sync/locators/src/block_locators.rs:270 — // TODO: generalize check for RECENT_INTERVAL > 1, or remove this comment if we hardwire that to 1 — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/src/lib.rs:77 — // // TODO (howardwu): Swap this with the official message for announcements. — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/src/validator/mod.rs:339 — // // TODO (howardwu): Switch to the iterator when DoubleEndedIterator is supported. — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/src/validator/router.rs:56 — //TODO(kaimast): if this fails, the validator must be corrupted. Handle this with higher severity. — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/src/prover/router.rs:164 — //TODO(kaimast): should this return None instead? — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/src/client/router.rs:148 — //TODO(kaimast): set disconnect reason based on error — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/src/client/router.rs:262 — // TODO(kaimast): This needs more testing to ensure disconnect is the correct action. — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/bft/src/gateway.rs:815 — // TODO(kaimast): This needs more testing to ensure disconnect is the correct action. — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/router/tests/cleanups.rs:46 — // TODO => validator(0, 1, &[], false, &mut rng).await, — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/router/src/heartbeat.rs:86 — /// TODO (howardwu): Consider checking minimum number of validators, to exclude clients and provers. — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment node/router/src/heartbeat.rs:226 — // TODO (howardwu): Remove this after specializing this function. — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • + 35 more in this group — see findings.md.
AXH1 · Runtime security headers · Runtime security header not set · ×11
  • Runtime security header not set: content-security-policy — The live app's responses did not include content-security-policy (restricts the sources a page may load — mitigates XSS/injection). Observed by booting the app in-sandbox — advisory evidence for AppSec / CRA / NIS2 runtime secure-defaults. Set it at your reverse proxy or in the app.
  • Runtime security header not set: cross-origin-embedder-policy — The live app's responses did not include cross-origin-embedder-policy (recommended by the OWASP Secure Headers Project (value: require-corp)). Observed by booting the app in-sandbox — advisory evidence for AppSec / CRA / NIS2 runtime secure-defaults. Set it at your reverse proxy or in the app.
  • Runtime security header not set: cross-origin-opener-policy — The live app's responses did not include cross-origin-opener-policy (recommended by the OWASP Secure Headers Project (value: same-origin)). Observed by booting the app in-sandbox — advisory evidence for AppSec / CRA / NIS2 runtime secure-defaults. Set it at your reverse proxy or in the app.
  • Runtime security header not set: cross-origin-resource-policy — The live app's responses did not include cross-origin-resource-policy (recommended by the OWASP Secure Headers Project (value: same-origin)). Observed by booting the app in-sandbox — advisory evidence for AppSec / CRA / NIS2 runtime secure-defaults. Set it at your reverse proxy or in the app.
  • Runtime security header not set: permissions-policy — The live app's responses did not include permissions-policy (restricts powerful browser features (camera, geolocation, …)). Observed by booting the app in-sandbox — advisory evidence for AppSec / CRA / NIS2 runtime secure-defaults. Set it at your reverse proxy or in the app.
  • Runtime security header not set: referrer-policy — The live app's responses did not include referrer-policy (limits referrer leakage to third parties). Observed by booting the app in-sandbox — advisory evidence for AppSec / CRA / NIS2 runtime secure-defaults. Set it at your reverse proxy or in the app.
  • Runtime security header not set: strict-transport-security — The live app's responses did not include strict-transport-security (forces HTTPS on subsequent requests — mitigates downgrade/MITM). Observed by booting the app in-sandbox — advisory evidence for AppSec / CRA / NIS2 runtime secure-defaults. Set it at your reverse proxy or in the app.
  • Runtime security header not set: x-content-type-options — The live app's responses did not include x-content-type-options (stops MIME-sniffing (expects 'nosniff')). Observed by booting the app in-sandbox — advisory evidence for AppSec / CRA / NIS2 runtime secure-defaults. Set it at your reverse proxy or in the app.
  • Runtime security header not set: x-dns-prefetch-control — The live app's responses did not include x-dns-prefetch-control (recommended by the OWASP Secure Headers Project (value: off)). Observed by booting the app in-sandbox — advisory evidence for AppSec / CRA / NIS2 runtime secure-defaults. Set it at your reverse proxy or in the app.
  • Runtime security header not set: x-frame-options — The live app's responses did not include x-frame-options (blocks clickjacking via framing (or use CSP frame-ancestors)). Observed by booting the app in-sandbox — advisory evidence for AppSec / CRA / NIS2 runtime secure-defaults. Set it at your reverse proxy or in the app.
  • Runtime security header not set: x-permitted-cross-domain-policies — The live app's responses did not include x-permitted-cross-domain-policies (recommended by the OWASP Secure Headers Project (value: none)). Observed by booting the app in-sandbox — advisory evidence for AppSec / CRA / NIS2 runtime secure-defaults. Set it at your reverse proxy or in the app.
D35 · Change Coupling · Change coupling · ×10
  • Change coupling: mock.rs ↔ prover.rs node/bft/ledger-service/src/mock.rs:1 — `node/bft/ledger-service/src/mock.rs` and `node/bft/ledger-service/src/prover.rs` change together 80% of the time (8 of the 10 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well, and counted over this repository's 10,000 most recent commits rather than its whole history — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets) with no explicit dependency between them. They sit in the same directory, but in this ecosystem each file is its own module — a sibling reference still needs an import — so the missing import edge is real: the coupling runs through shared behaviour, not a declared dependency. If they duplicate structure, extract the common part into one unit; otherwise the coupling is hidden and worth breaking. You can check this without leaving the row: of the 8 shared commits counted here, the most recent 3 are `d5b354c8` ref: set execution cost to 10 credits in `MockLedger`; `4970d1ac` Minor fixes (at that commit the files were still `node/narwhal/ledger-service/src/mock.rs` and `node/narwhal/ledger-service/src/prover.rs`); `2e33fa48` Introduce get_previous_committee_for_round (at that commit the files were still `node/narwhal/ledger-service/src/mock.rs` and `node/narwhal/ledger-service/src/prover.rs`) — run `git show` on any of them.
  • Change coupling: test_helpers.rs ↔ router.rs node/router/src/test_helpers.rs:1 — `node/router/src/test_helpers.rs` and `node/src/client/router.rs` change together 68% of the time (21 of the 31 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well, and counted over this repository's 10,000 most recent commits rather than its whole history — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets) with no explicit dependency — the edge is real but nothing declares it. Read the pair before acting: if one registers itself into the other through a hook or an initialiser, the missing dependency is DELIBERATE — the registration is the link, and it is meant not to be an import — and the thing to add is a comment on each side naming the other, not a merge; if they simply belong together, co-locate them; if neither holds, the coupling is hidden and worth breaking. You can check this without leaving the row: of the 21 shared commits counted here, the most recent 3 are `76d1cfb1` refactor(node/router): improve disconnect error propagation in the ro… (at that commit the file was still `node/router/tests/common/router.rs`); `e6607f43` feat(sync): support versioning for BlocResponse messages (at that commit the file was still `node/router/tests/common/router.rs`); `453f9864` feat(sync): do not sync when peer consensus version differs (at that commit the file was still `node/router/tests/common/router.rs`) — run `git show` on any of them.
  • Change coupling: certificate_response.rs ↔ storage.rs node/bft/events/src/certificate_response.rs:1 — `node/bft/events/src/certificate_response.rs` and `node/bft/src/helpers/storage.rs` change together 67% of the time (8 of the 12 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well, and counted over this repository's 10,000 most recent commits rather than its whole history — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets) with no explicit dependency — the edge is real but nothing declares it. Read the pair before acting: if one registers itself into the other through a hook or an initialiser, the missing dependency is DELIBERATE — the registration is the link, and it is meant not to be an import — and the thing to add is a comment on each side naming the other, not a merge; if they simply belong together, co-locate them; if neither holds, the coupling is hidden and worth breaking. You can check this without leaving the row: of the 8 shared commits counted here, the most recent 3 are `0bcb7607` Use committee_id in tests; `ce873652` Reverts election certificates; `3d108ca4` tests: remove author from batch signing — run `git show` on any of them.
  • Change coupling: test_helpers.rs ↔ router.rs node/router/src/test_helpers.rs:1 — `node/router/src/test_helpers.rs` and `node/src/prover/router.rs` change together 65% of the time (20 of the 31 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well, and counted over this repository's 10,000 most recent commits rather than its whole history — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets) with no explicit dependency — the edge is real but nothing declares it. Read the pair before acting: if one registers itself into the other through a hook or an initialiser, the missing dependency is DELIBERATE — the registration is the link, and it is meant not to be an import — and the thing to add is a comment on each side naming the other, not a merge; if they simply belong together, co-locate them; if neither holds, the coupling is hidden and worth breaking. You can check this without leaving the row: of the 20 shared commits counted here, the most recent 3 are `76d1cfb1` refactor(node/router): improve disconnect error propagation in the ro… (at that commit the file was still `node/router/tests/common/router.rs`); `e6607f43` feat(sync): support versioning for BlocResponse messages (at that commit the file was still `node/router/tests/common/router.rs`); `453f9864` feat(sync): do not sync when peer consensus version differs (at that commit the file was still `node/router/tests/common/router.rs`) — run `git show` on any of them.
  • Change coupling: memory.rs ↔ persistent.rs node/bft/storage-service/src/memory.rs:1 — `node/bft/storage-service/src/memory.rs` and `node/bft/storage-service/src/persistent.rs` change together 62% of the time (13 of the 21 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well, and counted over this repository's 10,000 most recent commits rather than its whole history — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets) with no explicit dependency between them. They sit in the same directory, but in this ecosystem each file is its own module — a sibling reference still needs an import — so the missing import edge is real: the coupling runs through shared behaviour, not a declared dependency. If they duplicate structure, extract the common part into one unit; otherwise the coupling is hidden and worth breaking. You can check this without leaving the row: of the 13 shared commits counted here, the most recent 3 are `1ece35a8` docs: address the review comments; `47bf742a` fix: count an already-aborted transmission ID under storage locks; `ac90b6d7` refactor: remove contains_transmission — run `git show` on any of them.
  • Change coupling: mod.rs ↔ mod.rs node/src/client/mod.rs:1 — `node/src/client/mod.rs` and `node/src/validator/mod.rs` change together 59% of the time (83 of the 141 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well, and counted over this repository's 10,000 most recent commits rather than its whole history — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets) with no explicit dependency — the edge is real but nothing declares it. Read the pair before acting: if one registers itself into the other through a hook or an initialiser, the missing dependency is DELIBERATE — the registration is the link, and it is meant not to be an import — and the thing to add is a comment on each side naming the other, not a merge; if they simply belong together, co-locate them; if neither holds, the coupling is hidden and worth breaking. You can check this without leaving the row: of the 83 shared commits counted here, the most recent 3 are `3544eac4` refactor: rename the JSON history flag to history_json; `85ff2e70` feat: write credits.aleo history as JSON from snarkos start --history; `69363e86` Remove unused and untested slipstream-plugins support. — run `git show` on any of them.
  • Change coupling: execute.rs ↔ transfer_private.rs cli/src/commands/developer/execute.rs:1 — `cli/src/commands/developer/execute.rs` and `cli/src/commands/developer/transfer_private.rs` change together 54% of the time (21 of the 39 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well, and counted over this repository's 10,000 most recent commits rather than its whole history — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets) with no explicit dependency between them. They sit in the same directory, but in this ecosystem each file is its own module — a sibling reference still needs an import — so the missing import edge is real: the coupling runs through shared behaviour, not a declared dependency. If they duplicate structure, extract the common part into one unit; otherwise the coupling is hidden and worth breaking. You can check this without leaving the row: of the 21 shared commits counted here, the most recent 3 are `e902d850` fix(cli): accept static queries on developer endpoints; `7f6ab436` misc(cli): remove `--storage-path` options for developer cmds; `4ae48c9a` feat(cli): add backwards compatibility for --broadcast and --query — run `git show` on any of them.
  • Change coupling: ready.rs ↔ primary.rs node/bft/src/helpers/ready.rs:1 — `node/bft/src/helpers/ready.rs` and `node/bft/src/primary.rs` change together 52% of the time (25 of the 48 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well, and counted over this repository's 10,000 most recent commits rather than its whole history — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets) with no explicit dependency — the edge is real but nothing declares it. Read the pair before acting: if one registers itself into the other through a hook or an initialiser, the missing dependency is DELIBERATE — the registration is the link, and it is meant not to be an import — and the thing to add is a comment on each side naming the other, not a merge; if they simply belong together, co-locate them; if neither holds, the coupling is hidden and worth breaking. You can check this without leaving the row: of the 25 shared commits counted here, the most recent 3 are `a8e0a8d8` ref: improve worker draining logic; `e2595c44` Revert "Revert "Merge pull request #3266 from AleoNet/optimize/clear-…; `99592f43` Revert "Merge pull request #3266 from AleoNet/optimize/clear-solutions" — run `git show` on any of them.
  • Change coupling: deploy.rs ↔ execute.rs cli/src/commands/developer/deploy.rs:1 — `cli/src/commands/developer/deploy.rs` and `cli/src/commands/developer/execute.rs` change together 52% of the time (30 of the 58 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well, and counted over this repository's 10,000 most recent commits rather than its whole history — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets) with no explicit dependency between them. They sit in the same directory, but in this ecosystem each file is its own module — a sibling reference still needs an import — so the missing import edge is real: the coupling runs through shared behaviour, not a declared dependency. If they duplicate structure, extract the common part into one unit; otherwise the coupling is hidden and worth breaking. You can check this without leaving the row: of the 30 shared commits counted here, the most recent 3 are `c1804188` Use v2 URLs in the devnet test, the backup script and the CLI help; `e902d850` fix(cli): accept static queries on developer endpoints; `7f6ab436` misc(cli): remove `--storage-path` options for developer cmds — run `git show` on any of them.
  • Change coupling: mod.rs ↔ mod.rs node/src/prover/mod.rs:1 — `node/src/prover/mod.rs` and `node/src/validator/mod.rs` change together 50% of the time (56 of the 112 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well, and counted over this repository's 10,000 most recent commits rather than its whole history — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets) with no explicit dependency — the edge is real but nothing declares it. Read the pair before acting: if one registers itself into the other through a hook or an initialiser, the missing dependency is DELIBERATE — the registration is the link, and it is meant not to be an import — and the thing to add is a comment on each side naming the other, not a merge; if they simply belong together, co-locate them; if neither holds, the coupling is hidden and worth breaking. You can check this without leaving the row: of the 56 shared commits counted here, the most recent 3 are `62caba23` refactor: attach the Ping task to the Router; `edd71893` fix: no more zombie tasks on shutdown; `4ec2f561` first pass at plumbing for slipstream plugins — run `git show` on any of them.
D15 · Churn × Complexity Hotspots · Hotspot · ×8
  • Hotspot: node/bft/src/primary.rs node/bft/src/primary.rs:476 — node/bft/src/primary.rs changed 37 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 47 in Primary::propose_batch at line 476. 9 of those changes were fix/bug commits, and the other 28 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-08-15..2026-11-13, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-15 13:07:12 -07:00' --until='2026-11-13 13:07:12 -07:00' --full-history --no-merges -- node/bft/src/primary.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: node/bft/src/gateway.rs node/bft/src/gateway.rs:646 — node/bft/src/gateway.rs changed 26 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 57 in Gateway::inbound at line 646. 3 of those changes were fix/bug commits, and the other 23 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-08-15..2026-11-13, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-15 13:07:12 -07:00' --until='2026-11-13 13:07:12 -07:00' --full-history --no-merges -- node/bft/src/gateway.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: cli/src/commands/start.rs cli/src/commands/start.rs:800 — cli/src/commands/start.rs changed 17 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 38 in Start::parse_node at line 800. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-15..2026-11-13, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-15 13:07:12 -07:00' --until='2026-11-13 13:07:12 -07:00' --full-history --no-merges -- cli/src/commands/start.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: node/bft/src/helpers/storage.rs node/bft/src/helpers/storage.rs:915 — node/bft/src/helpers/storage.rs changed 23 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 17 in Storage::sync_certificate_with_block at line 915. 8 of those changes were fix/bug commits, and the other 15 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-08-15..2026-11-13, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-15 13:07:12 -07:00' --until='2026-11-13 13:07:12 -07:00' --full-history --no-merges -- node/bft/src/helpers/storage.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: node/bft/src/bft.rs node/bft/src/bft.rs:596 — node/bft/src/bft.rs changed 11 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 27 in BFT::commit_leader_certificate at line 596. 3 of those changes were fix/bug commits, and the other 8 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-08-15..2026-11-13, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-15 13:07:12 -07:00' --until='2026-11-13 13:07:12 -07:00' --full-history --no-merges -- node/bft/src/bft.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: node/src/node.rs node/src/node.rs:388 — node/src/node.rs changed 12 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 21 in Node::perform_auto_checkpoints at line 388. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-15..2026-11-13, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-15 13:07:12 -07:00' --until='2026-11-13 13:07:12 -07:00' --full-history --no-merges -- node/src/node.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: node/router/src/inbound.rs node/router/src/inbound.rs:80 — node/router/src/inbound.rs changed 3 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 47 in Inbound::inbound at line 80. 1 of those changes was a fix/bug commit, and the other 2 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-08-15..2026-11-13, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-15 13:07:12 -07:00' --until='2026-11-13 13:07:12 -07:00' --full-history --no-merges -- node/router/src/inbound.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: cli/src/commands/developer/mod.rs cli/src/commands/developer/mod.rs:434 — cli/src/commands/developer/mod.rs changed 5 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 17 in Developer::handle_transaction at line 434. 1 of those changes was a fix/bug commit, and the other 4 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-08-15..2026-11-13, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-15 13:07:12 -07:00' --until='2026-11-13 13:07:12 -07:00' --full-history --no-merges -- cli/src/commands/developer/mod.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
D3 · God Classes · MethodTooLong · ×8
  • MethodTooLong: Primary.propose_batch node/bft/src/primary.rs:476 — MethodTooLong — propose_batch runs 204 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 104 over it, 2.04× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: Gateway.inbound node/bft/src/gateway.rs:646 — MethodTooLong — inbound runs 189 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 89 over it, 1.89× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: Primary.start_handlers node/bft/src/primary.rs:1417 — MethodTooLong — start_handlers runs 146 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 46 over it, 1.46× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: Inbound.inbound node/router/src/inbound.rs:80 — MethodTooLong — inbound runs 146 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 46 over it, 1.46× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: BFT.commit_leader_certificate node/bft/src/bft.rs:596 — MethodTooLong — commit_leader_certificate runs 133 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 33 over it, 1.33× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: Rest.build_routes node/rest/src/lib.rs:292 — MethodTooLong — build_routes runs 127 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 27 over it, 1.27× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: Start.parse_node cli/src/commands/start.rs:800 — MethodTooLong — parse_node runs 120 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 20 over it, 1.20× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: Consensus.try_advance_to_next_block node/consensus/src/lib.rs:633 — MethodTooLong — try_advance_to_next_block runs 114 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 14 over it, 1.14× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
D2 · Cognitive Complexity · BlockSync · ×7
  • BlockSync::prepare_block_requests (cognitive 40) node/sync/src/block_sync.rs:975 — BlockSync::prepare_block_requests has cognitive complexity 40 (threshold 15). Drivers by points: if/else 18 (30 pts), loops 4 (8 pts), boolean chains 2 (nesting depth added 16). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • BlockSync::update_peer_locators (cognitive 21) node/sync/src/block_sync.rs:814 — BlockSync::update_peer_locators has cognitive complexity 21 (threshold 15). Drivers by points: if/else 7 (11 pts), match/switch 3 (7 pts), loops 3 (nesting depth added 8). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • BlockSync::send_block_requests (cognitive 20) node/sync/src/block_sync.rs:434 — BlockSync::send_block_requests has cognitive complexity 20 (threshold 15). Drivers by points: if/else 5 (9 pts), loops 4 (6 pts), match/switch 3 (5 pts) (nesting depth added 8). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • BlockSync::try_issuing_block_requests (cognitive 18) node/sync/src/block_sync.rs:546 — BlockSync::try_issuing_block_requests has cognitive complexity 18 (threshold 15). Drivers by points: if/else 7 (11 pts), loops 2 (5 pts), boolean chains 2 (nesting depth added 7). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • BlockSync::insert_block_responses (cognitive 17) node/sync/src/block_sync.rs:595 — BlockSync::insert_block_responses has cognitive complexity 17 (threshold 15). Drivers by points: if/else 9 (16 pts), loops 1 (nesting depth added 7). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • BlockSync::try_advancing_block_synchronization (cognitive 16) node/sync/src/block_sync.rs:684 — BlockSync::try_advancing_block_synchronization has cognitive complexity 16 (threshold 15). Drivers by points: if/else 7 (11 pts), match/switch 2 (4 pts), loops 1 (nesting depth added 6). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • BlockSync::handle_block_request_timeouts (cognitive 16) node/sync/src/block_sync.rs:1357 — BlockSync::handle_block_request_timeouts has cognitive complexity 16 (threshold 15). Drivers by points: if/else 6 (8 pts), loops 3 (5 pts), boolean chains 3 (nesting depth added 4). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D3 · God Classes · ClassTooLong · ×7
  • ClassTooLong: Primary node/bft/src/primary.rs:153 — ClassTooLong — 995 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), 41 methods, 9 blocks, lines 153-2222. The bar is 400 significant lines; this is 595 over it, 2.49× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • ClassTooLong: Gateway node/bft/src/gateway.rs:176 — ClassTooLong — 959 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), 46 methods, 15 blocks, lines 178-2170. The bar is 400 significant lines; this is 559 over it, 2.40× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • ClassTooLong: BlockSync node/sync/src/block_sync.rs:202 — ClassTooLong — 646 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), 35 methods, 5 blocks, lines 202-1623. The bar is 400 significant lines; this is 246 over it, 1.62× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • ClassTooLong: Start cli/src/commands/start.rs:140 — ClassTooLong — 515 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), 12 methods, 3 blocks, lines 140-1142. The bar is 400 significant lines; this is 115 over it, 1.29× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • ClassTooLong: Sync node/bft/src/sync/mod.rs:81 — ClassTooLong — 475 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), 23 methods, 7 blocks, lines 81-1095. The bar is 400 significant lines; this is 75 over it, 1.19× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • ClassTooLong: BFT node/bft/src/bft.rs:61 — ClassTooLong — 440 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), 24 methods, 8 blocks, lines 61-943. The bar is 400 significant lines; this is 40 over it, 1.10× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • ClassTooLong: Consensus node/consensus/src/lib.rs:102 — ClassTooLong — 431 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), 30 methods, 8 blocks, lines 102-888. The bar is 400 significant lines; this is 31 over it, 1.08× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
P7 · Outbound HTTP resilience · Outbound HTTP without resilience · ×7
  • Outbound HTTP without resilience cli/src/commands/developer/mod.rs:314 — `ureq::post(` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout.
  • Outbound HTTP without resilience cli/src/commands/developer/mod.rs:330 — `ureq::get(` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout.
  • Outbound HTTP without resilience cli/src/commands/developer/mod.rs:347 — `ureq::get(` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout.
  • Outbound HTTP without resilience cli/src/commands/developer/scan.rs:156 — `ureq::get(` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout.
  • Outbound HTTP without resilience cli/src/commands/developer/scan.rs:404 — `ureq::get(` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout.
  • Outbound HTTP without resilience node/cdn/src/blocks.rs:65 — `Client::builder()` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout.
  • Outbound HTTP without resilience node/src/bootstrap_client/mod.rs:100 — `reqwest::Client::new(` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout.
D3 · God Classes · TooManyMethods · ×6
  • TooManyMethods: Rest node/rest/src/lib.rs:209 — TooManyMethods — 75 methods, declared across 2 files: src/routes.rs (68), src/lib.rs (7). The bar is 30 methods; this is 45 over it, 2.50× the bar. That list is where to read them, not a suggestion to split the file: the members belong to the type wherever they are declared, so moving them between files leaves the count unchanged. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: Gateway node/bft/src/gateway.rs:176 — TooManyMethods — 46 methods. The bar is 30 methods; this is 16 over it, 1.53× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: Primary node/bft/src/primary.rs:153 — TooManyMethods — 41 methods. The bar is 30 methods; this is 11 over it, 1.37× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: BlockSync node/sync/src/block_sync.rs:202 — TooManyMethods — 35 methods. The bar is 30 methods; this is 5 over it, 1.17× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: Storage node/bft/src/helpers/storage.rs:74 — TooManyMethods — 34 methods. The bar is 30 methods; this is 4 over it, 1.13× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: Worker node/bft/src/worker.rs:52 — TooManyMethods — 33 methods. The bar is 30 methods; this is 3 over it, 1.10× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
D3 · God Classes · FileTooLong · ×6
  • FileTooLong: src/gateway.rs node/bft/src/gateway.rs — FileTooLong — 1128 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), about 85% of them inside a single declaration: Gateway (15 blocks, 178-2170). The bar is 500 significant lines; this is 628 over it, 2.26× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
  • FileTooLong: src/primary.rs node/bft/src/primary.rs — FileTooLong — 1084 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), about 92% of them inside a single declaration: Primary (9 blocks, 153-2222). The bar is 500 significant lines; this is 584 over it, 2.17× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
  • FileTooLong: src/routes.rs node/rest/src/routes.rs — FileTooLong — 877 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), about 83% of them inside a single declaration: Rest (306-1746). The bar is 500 significant lines; this is 377 over it, 1.75× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
  • FileTooLong: src/block_sync.rs node/sync/src/block_sync.rs — FileTooLong — 790 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), about 82% of them inside a single declaration: BlockSync (5 blocks, 202-1623). The bar is 500 significant lines; this is 290 over it, 1.58× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
  • FileTooLong: commands/start.rs cli/src/commands/start.rs — FileTooLong — 693 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), about 74% of them inside a single declaration: Start (3 blocks, 140-1142). The bar is 500 significant lines; this is 193 over it, 1.39× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
  • FileTooLong: sync/mod.rs node/bft/src/sync/mod.rs — FileTooLong — 513 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), about 93% of them inside a single declaration: Sync (7 blocks, 81-1095). The bar is 500 significant lines; this is 13 over it, 1.03× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
D4 · Code Duplication · Duplicated block (13 lines × 2) · ×6
  • Duplicated block (13 lines × 2) node/bft/src/gateway.rs:771 — node/bft/src/gateway.rs:771-783 | node/router/src/inbound.rs:142-154 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice.
  • Duplicated block (13 lines × 2) node/bft/src/helpers/cache.rs:216 — node/bft/src/helpers/cache.rs:216-228 | node/router/src/helpers/cache.rs:300-312 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
  • Duplicated block (13 lines × 2) node/src/node.rs:142 — node/src/node.rs:142-154 | node/src/node.rs:225-237 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `node/src/node.rs:142` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (13 lines × 2) node/bft/src/bft.rs:333 — node/bft/src/bft.rs:333-345 | node/bft/src/bft.rs:644-656 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
  • Duplicated block (13 lines × 2) cli/src/commands/developer/deploy.rs:217 — cli/src/commands/developer/deploy.rs:217-229 | cli/src/commands/developer/execute.rs:219-231 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `cli/src/commands/developer/deploy.rs:217` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (13 lines × 2) node/src/client/mod.rs:600 — node/src/client/mod.rs:600-612 | node/src/validator/mod.rs:553-565 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice.
D4 · Code Duplication · Duplicated block (8 lines × 2) · ×6
  • Duplicated block (8 lines × 2) node/bft/src/gateway.rs:288 — node/bft/src/gateway.rs:288-295 | node/router/src/lib.rs:179-186 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Read the line range as the matched WINDOW rather than a finished unit: at `node/bft/src/gateway.rs:288` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `node/bft/src/gateway.rs:301` calls `address`, `required_consensus_upgrade_path` and `node/router/src/lib.rs:189` does not — after which the two agree again for 3 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
  • Duplicated block (8 lines × 2) node/bft/src/gateway.rs:2014 — node/bft/src/gateway.rs:2014-2021 | node/src/bootstrap_client/handshake.rs:238-245 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Read the line range as the matched WINDOW rather than a finished unit: at `node/bft/src/gateway.rs:2014` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (8 lines × 2) node/tcp/src/protocols/disconnect.rs:53 — node/tcp/src/protocols/disconnect.rs:53-60 | node/tcp/src/protocols/on_connect.rs:45-52 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `node/tcp/src/protocols/disconnect.rs:53` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (8 lines × 2) ledger-distribution/src/blocks_bucket.rs:144 — ledger-distribution/src/blocks_bucket.rs:144-151 | ledger-distribution/src/blocks_bucket.rs:199-206 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
  • Duplicated block (8 lines × 2) node/bft/events/src/disconnect.rs:77 — node/bft/events/src/disconnect.rs:77-84 | node/router/messages/src/helpers/disconnect.rs:166-173 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice.
  • Duplicated block (8 lines × 2) node/bft/src/helpers/cache.rs:205 — node/bft/src/helpers/cache.rs:205-212 | node/router/src/helpers/cache.rs:289-296 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice.
D2 · Cognitive Complexity · Gateway · ×5
  • Gateway::inbound (cognitive 70) node/bft/src/gateway.rs:646 — Gateway::inbound has cognitive complexity 70 (threshold 15). Drivers by points: if/else 25 (50 pts), match/switch 7 (14 pts), loops 2 (4 pts), boolean chains 2 (nesting depth added 34). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • Gateway::perform_handshake (cognitive 33) node/bft/src/gateway.rs:1605 — Gateway::perform_handshake has cognitive complexity 33 (threshold 15). Drivers by points: if/else 15 (24 pts), match/switch 3 (5 pts), boolean chains 4 (nesting depth added 11). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • Gateway::log_connected_validators (cognitive 17) node/bft/src/gateway.rs:1043 — Gateway::log_connected_validators has cognitive complexity 17 (threshold 15). Drivers by points: if/else 10 (13 pts), match/switch 2, boolean chains 1, loops 1 (nesting depth added 3). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.
  • Gateway::handle_bootstrap_peers (cognitive 17) node/bft/src/gateway.rs:1195 — Gateway::handle_bootstrap_peers has cognitive complexity 17 (threshold 15). Drivers by points: if/else 6 (11 pts), loops 2 (3 pts), match/switch 1 (3 pts) (nesting depth added 8). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • Gateway::handle_min_connected_validators (cognitive 17) node/bft/src/gateway.rs:1276 — Gateway::handle_min_connected_validators has cognitive complexity 17 (threshold 15). Drivers by points: if/else 6 (12 pts), loops 1 (2 pts), match/switch 1 (2 pts), boolean chains 1 (nesting depth added 8). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D5 · Coupling · Off the main sequence · ×5
  • Off the main sequence: snarkos-account — snarkos-account: abstractness 0.00, instability 0.00, distance 1.00 — zone of pain — concrete and depended on by 6 project(s), so it's rigid to change.
  • Off the main sequence: snarkos-node-metrics — snarkos-node-metrics: abstractness 0.00, instability 0.00, distance 1.00 — zone of pain — concrete and depended on by 11 project(s), so it's rigid to change.
  • Off the main sequence: snarkos-node-sync-locators — snarkos-node-sync-locators: abstractness 0.00, instability 0.00, distance 1.00 — zone of pain — concrete and depended on by 4 project(s), so it's rigid to change.
  • Off the main sequence: snarkos-utilities — snarkos-utilities: abstractness 0.17, instability 0.00, distance 0.83 — zone of pain — concrete and depended on by 8 project(s), so it's rigid to change.
  • Off the main sequence: snarkos-node-network — snarkos-node-network: abstractness 0.14, instability 0.13, distance 0.73 — zone of pain — concrete and depended on by 7 project(s), so it's rigid to change.
D6 · Cohesion (LCOM4) · Low cohesion · ×5
  • Low cohesion: MockLedgerService (LCOM4 7) node/bft/ledger-service/src/mock.rs:42 — MockLedgerService's methods fall into 7 groups that share no field and call none of each other, against a bar of more than 3 for this run (LCOM4, configurable — your repository's bar is the one quoted here). Each group is a set of methods reachable from one another through shared fields or direct calls, so 7 groups means the type has that many internally-connected clusters with nothing tying them together. Types whose shape makes a high count expected — and which would otherwise dominate this list — are excluded before this row is raised, so this is a genuine split candidate rather than a metric reading. It is still a shape, not a defect: confirm the groups match responsibilities you can name before splitting.
  • Low cohesion: Storage (LCOM4 6) node/bft/src/helpers/storage.rs:74 — Storage's methods fall into 6 groups that share no field and call none of each other, against a bar of more than 3 for this run (LCOM4, configurable — your repository's bar is the one quoted here). Each group is a set of methods reachable from one another through shared fields or direct calls, so 6 groups means the type has that many internally-connected clusters with nothing tying them together. Types whose shape makes a high count expected — and which would otherwise dominate this list — are excluded before this row is raised, so this is a genuine split candidate rather than a metric reading. It is still a shape, not a defect: confirm the groups match responsibilities you can name before splitting.
  • Low cohesion: Gateway (LCOM4 4) node/bft/src/gateway.rs:176 — Gateway's methods fall into 4 groups that share no field and call none of each other, against a bar of more than 3 for this run (LCOM4, configurable — your repository's bar is the one quoted here). Each group is a set of methods reachable from one another through shared fields or direct calls, so 4 groups means the type has that many internally-connected clusters with nothing tying them together. Types whose shape makes a high count expected — and which would otherwise dominate this list — are excluded before this row is raised, so this is a genuine split candidate rather than a metric reading. It is still a shape, not a defect: confirm the groups match responsibilities you can name before splitting.
  • Low cohesion: Client (LCOM4 4) node/src/client/mod.rs:100 — Client's methods fall into 4 groups that share no field and call none of each other, against a bar of more than 3 for this run (LCOM4, configurable — your repository's bar is the one quoted here). Each group is a set of methods reachable from one another through shared fields or direct calls, so 4 groups means the type has that many internally-connected clusters with nothing tying them together. Types whose shape makes a high count expected — and which would otherwise dominate this list — are excluded before this row is raised, so this is a genuine split candidate rather than a metric reading. It is still a shape, not a defect: confirm the groups match responsibilities you can name before splitting.
  • Low cohesion: Prover (LCOM4 4) node/src/prover/mod.rs:71 — Prover's methods fall into 4 groups that share no field and call none of each other, against a bar of more than 3 for this run (LCOM4, configurable — your repository's bar is the one quoted here). Each group is a set of methods reachable from one another through shared fields or direct calls, so 4 groups means the type has that many internally-connected clusters with nothing tying them together. Types whose shape makes a high count expected — and which would otherwise dominate this list — are excluded before this row is raised, so this is a genuine split candidate rather than a metric reading. It is still a shape, not a defect: confirm the groups match responsibilities you can name before splitting.
D2 · Cognitive Complexity · Primary · ×4
  • Primary::propose_batch (cognitive 97) node/bft/src/primary.rs:476 — Primary::propose_batch has cognitive complexity 97 (threshold 15). Drivers by points: if/else 28 (68 pts), match/switch 6 (18 pts), boolean chains 6, loops 3 (5 pts) (nesting depth added 54). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • Primary::start_handlers (cognitive 63) node/bft/src/primary.rs:1417 — Primary::start_handlers has cognitive complexity 63 (threshold 15). Drivers by points: if/else 18 (43 pts), loops 12 (15 pts), match/switch 2 (4 pts), boolean chains 1 (nesting depth added 30). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • Primary::process_batch_propose_from_peer (cognitive 27) node/bft/src/primary.rs:903 — Primary::process_batch_propose_from_peer has cognitive complexity 27 (threshold 15). Drivers by points: if/else 18 (24 pts), boolean chains 2, match/switch 1 (nesting depth added 6). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • Primary::add_signature_to_batch (cognitive 17) node/bft/src/primary.rs:1153 — Primary::add_signature_to_batch has cognitive complexity 17 (threshold 15). Drivers by points: if/else 9 (14 pts), match/switch 2 (3 pts) (nesting depth added 6). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
D2 · Cognitive Complexity · Start · ×4
  • Start::parse_node (cognitive 48) cli/src/commands/start.rs:800 — Start::parse_node has cognitive complexity 48 (threshold 15). Drivers by points: if/else 28 (36 pts), match/switch 5 (6 pts), boolean chains 5, loops 1 (nesting depth added 9). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.
  • Start::parse_development (cognitive 33) cli/src/commands/start.rs:558 — Start::parse_development has cognitive complexity 33 (threshold 15). Drivers by points: if/else 13 (22 pts), loops 3 (9 pts), boolean chains 2 (nesting depth added 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • Start::check_for_old_storage_format (cognitive 18) cli/src/commands/start.rs:1030 — Start::check_for_old_storage_format has cognitive complexity 18 (threshold 15). Drivers by points: if/else 10 (18 pts) (nesting depth added 8). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • Start::parse_genesis (cognitive 16) cli/src/commands/start.rs:659 — Start::parse_genesis has cognitive complexity 16 (threshold 15). Drivers by points: if/else 4 (6 pts), match/switch 2 (6 pts), loops 1 (3 pts), boolean chains 1 (nesting depth added 8). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · Sync · ×4
  • Sync::sync_storage_with_ledger_at_bootup (cognitive 37) node/bft/src/sync/mod.rs:347 — Sync::sync_storage_with_ledger_at_bootup has cognitive complexity 37 (threshold 15). Drivers by points: loops 9 (27 pts), if/else 4 (9 pts), boolean chains 1 (nesting depth added 23). To reduce it, break up the iteration: give each loop body a named function, and split a multi-phase loop into one function per phase so no single body carries the whole pipeline.
  • Sync::try_sync_storage_with_block (cognitive 29) node/bft/src/sync/mod.rs:805 — Sync::try_sync_storage_with_block has cognitive complexity 29 (threshold 15). Drivers by points: loops 6 (12 pts), if/else 7 (11 pts), match/switch 3 (4 pts), boolean chains 2 (nesting depth added 11). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • Sync::try_advancing_block_synchronization_inner (cognitive 27) node/bft/src/sync/mod.rs:509 — Sync::try_advancing_block_synchronization_inner has cognitive complexity 27 (threshold 15). Drivers by points: if/else 10 (17 pts), match/switch 2 (6 pts), loops 2 (4 pts) (nesting depth added 13). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • Sync::run (cognitive 17) node/bft/src/sync/mod.rs:159 — Sync::run has cognitive complexity 17 (threshold 15). Drivers by points: if/else 4 (8 pts), loops 8, boolean chains 1 (nesting depth added 4). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D36 · Supply-chain Provenance & Signing · REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D1 · Cyclomatic Complexity · Primary · ×3
  • Primary::propose_batch (cyclomatic 47) node/bft/src/primary.rs:476 — Primary::propose_batch has cyclomatic complexity 47 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
  • Primary::start_handlers (cyclomatic 33) node/bft/src/primary.rs:1417 — Primary::start_handlers has cyclomatic complexity 33 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
  • Primary::process_batch_propose_from_peer (cyclomatic 22) node/bft/src/primary.rs:903 — Primary::process_batch_propose_from_peer has cyclomatic complexity 22 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D2 · Cognitive Complexity · BFT · ×3
  • BFT::commit_leader_certificate (cognitive 63) node/bft/src/bft.rs:596 — BFT::commit_leader_certificate has cognitive complexity 63 (threshold 15). Drivers by points: if/else 13 (34 pts), loops 7 (15 pts), match/switch 4 (13 pts), boolean chains 1 (nesting depth added 38). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • BFT::try_advance_to_next_round (cognitive 20) node/bft/src/bft.rs:228 — BFT::try_advance_to_next_round has cognitive complexity 20 (threshold 15). Drivers by points: if/else 8 (13 pts), match/switch 3 (7 pts) (nesting depth added 9). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • BFT::order_dag_with_dfs (cognitive 17) node/bft/src/bft.rs:867 — BFT::order_dag_with_dfs has cognitive complexity 17 (threshold 15). Drivers by points: if/else 4 (7 pts), match/switch 2 (7 pts), loops 2 (3 pts) (nesting depth added 9). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · Client · ×3
  • Client::initialize_solution_verification (cognitive 25) node/src/client/mod.rs:338 — Client::initialize_solution_verification has cognitive complexity 25 (threshold 15). Drivers by points: if/else 7 (17 pts), match/switch 1 (4 pts), loops 2 (3 pts), boolean chains 1 (nesting depth added 14). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • Client::initialize_execute_verification (cognitive 21) node/src/client/mod.rs:503 — Client::initialize_execute_verification has cognitive complexity 21 (threshold 15). Drivers by points: if/else 4 (11 pts), loops 3 (6 pts), match/switch 1 (3 pts), boolean chains 1 (nesting depth added 12). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • Client::initialize_deploy_verification (cognitive 20) node/src/client/mod.rs:418 — Client::initialize_deploy_verification has cognitive complexity 20 (threshold 15). Drivers by points: if/else 5 (13 pts), loops 2 (3 pts), match/switch 1 (3 pts), boolean chains 1 (nesting depth added 11). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D4 · Code Duplication · Edited copy of a member (14 corresponding lines) · ×3
  • Edited copy of a member (14 corresponding lines) cli/src/commands/developer/mod.rs:310 — cli/src/commands/developer/mod.rs:310-323 | cli/src/commands/developer/mod.rs:326-340 — These two members are one piece of code written twice and then edited apart: 14 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (14 corresponding lines) cli/src/commands/clean.rs:85 — cli/src/commands/clean.rs:85-98 | cli/src/commands/clean.rs:101-117 — These two members are one piece of code written twice and then edited apart: 14 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (14 corresponding lines) node/router/src/helpers/cache.rs:251 — node/router/src/helpers/cache.rs:251-266 | node/router/src/helpers/cache.rs:273-286 — These two members are one piece of code written twice and then edited apart: 14 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (11 corresponding lines) · ×3
  • Edited copy of a member (11 corresponding lines) node/bft/src/gateway.rs:1002 — node/bft/src/gateway.rs:1002-1012 | node/router/src/lib.rs:283-295 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (11 corresponding lines) node/bft/ledger-service/src/mock.rs:117 — node/bft/ledger-service/src/mock.rs:117-127 | node/bft/ledger-service/src/mock.rs:138-148 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (11 corresponding lines) node/rest/src/routes.rs:965 — node/rest/src/routes.rs:965-977 | node/rest/src/routes.rs:983-993 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Duplicated block (7 lines × 2) · ×3
  • Duplicated block (7 lines × 2) node/bft/src/helpers/storage.rs:976 — node/bft/src/helpers/storage.rs:976-982 | node/bft/src/helpers/storage.rs:1000-1006 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `node/bft/src/helpers/storage.rs:976` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (7 lines × 2) node/bft/src/sync/mod.rs:1009 — node/bft/src/sync/mod.rs:1009-1015 | node/bft/src/worker.rs:574-580 — before extracting anything, compare `node/bft/src/sync/mod.rs` and `node/bft/src/worker.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 33 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place.
  • Duplicated block (7 lines × 2) node/cdn/src/blocks.rs:456 — node/cdn/src/blocks.rs:456-462 | node/cdn/src/blocks.rs:487-493 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `node/cdn/src/blocks.rs:456` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D4 · Code Duplication · Duplicated block (5 lines × 2) · ×3
  • Duplicated block (5 lines × 2) node/tcp/src/protocols/handshake.rs:52 — node/tcp/src/protocols/handshake.rs:52-56 | node/tcp/src/protocols/reading.rs:86-90 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `node/tcp/src/protocols/handshake.rs:52` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (5 lines × 2) node/bft/src/gateway.rs:995 — node/bft/src/gateway.rs:995-999 | node/bft/src/primary.rs:2182-2186 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
  • Duplicated block (5 lines × 2) node/bft/src/gateway.rs:2057 — node/bft/src/gateway.rs:2057-2061 | node/src/bootstrap_client/handshake.rs:292-296 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Read the line range as the matched WINDOW rather than a finished unit: at `node/bft/src/gateway.rs:2057` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D4 · Code Duplication · Duplicated block (9 lines × 2) · ×3
  • Duplicated block (9 lines × 2) node/bft/src/primary.rs:1492 — node/bft/src/primary.rs:1492-1501 | node/bft/src/primary.rs:1568-1576 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `node/bft/src/primary.rs:1492` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (9 lines × 2) node/src/client/mod.rs:456 — node/src/client/mod.rs:456-464 | node/src/client/mod.rs:543-551 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
  • Duplicated block (9 lines × 2) node/bft/src/gateway.rs:1379 — node/bft/src/gateway.rs:1379-1387 | node/bft/src/gateway.rs:1455-1463 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `node/bft/src/gateway.rs:1379` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D1 · Cyclomatic Complexity · Gateway · ×2
  • Gateway::inbound (cyclomatic 57) node/bft/src/gateway.rs:646 — Gateway::inbound has cyclomatic complexity 57 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
  • Gateway::perform_handshake (cyclomatic 21) node/bft/src/gateway.rs:1605 — Gateway::perform_handshake has cyclomatic complexity 21 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · Start · ×2
  • Start::parse_node (cyclomatic 38) cli/src/commands/start.rs:800 — Start::parse_node has cyclomatic complexity 38 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
  • Start::parse_development (cyclomatic 16) cli/src/commands/start.rs:558 — Start::parse_development has cyclomatic complexity 16 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D2 · Cognitive Complexity · snarkos_node_cdn · ×2
  • snarkos_node_cdn::blocks::download_block_bundles (cognitive 33) node/cdn/src/blocks.rs:333 — snarkos_node_cdn::blocks::download_block_bundles has cognitive complexity 33 (threshold 15). Drivers by points: if/else 4 (12 pts), loops 4 (11 pts), match/switch 2 (10 pts) (nesting depth added 23). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • snarkos_node_cdn::blocks::load_blocks (cognitive 17) node/cdn/src/blocks.rs:189 — snarkos_node_cdn::blocks::load_blocks has cognitive complexity 17 (threshold 15). Drivers by points: if/else 7 (12 pts), loops 2 (3 pts), match/switch 2 (nesting depth added 6). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · BFTPersistentStorage · ×2
  • BFTPersistentStorage::remove_transmissions (cognitive 29) node/bft/storage-service/src/persistent.rs:227 — BFTPersistentStorage::remove_transmissions has cognitive complexity 29 (threshold 15). Drivers by points: if/else 7 (20 pts), match/switch 3 (8 pts), loops 1 (nesting depth added 18). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • BFTPersistentStorage::insert_transmissions (cognitive 23) node/bft/storage-service/src/persistent.rs:134 — BFTPersistentStorage::insert_transmissions has cognitive complexity 23 (threshold 15). Drivers by points: if/else 5 (15 pts), match/switch 3 (6 pts), loops 2 (nesting depth added 13). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · Storage · ×2
  • Storage::sync_certificate_with_block (cognitive 25) node/bft/src/helpers/storage.rs:915 — Storage::sync_certificate_with_block has cognitive complexity 25 (threshold 15). Drivers by points: if/else 14 (20 pts), boolean chains 2, match/switch 1 (2 pts), loops 1 (nesting depth added 7). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • Storage::check_batch_header (cognitive 24) node/bft/src/helpers/storage.rs:535 — Storage::check_batch_header has cognitive complexity 24 (threshold 15). Drivers by points: if/else 11 (21 pts), loops 1 (2 pts), boolean chains 1 (nesting depth added 11). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · snarkos_cli · ×2
  • snarkos_cli::helpers::fd_check::spawn_fd_monitor (cognitive 17) cli/src/helpers/fd_check.rs:135 — snarkos_cli::helpers::fd_check::spawn_fd_monitor has cognitive complexity 17 (threshold 15). Drivers by points: if/else 5 (12 pts), match/switch 2 (4 pts), loops 1 (nesting depth added 9). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • snarkos_cli::helpers::logger::parse_log_verbosity (cognitive 17) cli/src/helpers/logger.rs:35 — snarkos_cli::helpers::logger::parse_log_verbosity has cognitive complexity 17 (threshold 15). Drivers by points: if/else 16, match/switch 1. To reduce it, split the body: this score is breadth rather than depth — many checks laid out side by side rather than nested inside one another, so inverting conditions into early returns has nothing left to flatten. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D30 · Dependency Vulnerabilities · Medium vulnerability · ×2
  • REDACTED
  • REDACTED
D4 · Code Duplication · Edited copy of a member (19 corresponding lines) · ×2
  • Edited copy of a member (19 corresponding lines) node/bft/events/src/lib.rs:286 — node/bft/events/src/lib.rs:286-307 | node/router/messages/src/lib.rs:295-313 — These two members are one piece of code written twice and then edited apart: 19 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (19 corresponding lines) node/bft/src/helpers/pending.rs:212 — node/bft/src/helpers/pending.rs:212-233 | node/bft/src/helpers/pending.rs:236-254 — These two members are one piece of code written twice and then edited apart: 19 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (24 corresponding lines) · ×2
  • Edited copy of a member (24 corresponding lines) node/tcp/src/protocols/reading.rs:82 — node/tcp/src/protocols/reading.rs:82-105 | node/tcp/src/protocols/writing.rs:76-104 — These two members are one piece of code written twice and then edited apart: 24 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (24 corresponding lines) node/bft/src/helpers/channels.rs:126 — node/bft/src/helpers/channels.rs:126-152 | node/bft/src/helpers/channels.rs:252-275 — These two members are one piece of code written twice and then edited apart: 24 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (17 corresponding lines) · ×2
  • Edited copy of a member (17 corresponding lines) node/bft/events/src/lib.rs:240 — node/bft/events/src/lib.rs:240-259 | node/router/messages/src/lib.rs:231-247 — These two members are one piece of code written twice and then edited apart: 17 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (17 corresponding lines) node/tcp/src/protocols/writing.rs:120 — node/tcp/src/protocols/writing.rs:120-140 | node/tcp/src/protocols/writing.rs:153-169 — These two members are one piece of code written twice and then edited apart: 17 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copies of one member (3 members, 12+ corresponding lines) · ×2
  • Edited copies of one member (3 members, 12+ corresponding lines) node/bft/events/src/challenge_request.rs:58 — node/bft/events/src/challenge_request.rs:58-78 | node/bft/events/src/helpers/handshake.rs:180-191 | node/router/messages/src/challenge_request.rs:55-77 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 12 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
  • Edited copies of one member (3 members, 12+ corresponding lines) node/bft/src/helpers/storage.rs:444 — node/bft/src/helpers/storage.rs:444-456 | node/bft/src/helpers/storage.rs:460-471 | node/bft/src/helpers/storage.rs:475-486 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 12 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication · Edited copy of a member (16 corresponding lines) · ×2
  • Edited copy of a member (16 corresponding lines) node/bft/ledger-service/src/helpers.rs:28 — node/bft/ledger-service/src/helpers.rs:28-50 | node/bft/ledger-service/src/helpers.rs:56-71 — These two members are one piece of code written twice and then edited apart: 16 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (16 corresponding lines) node/sync/src/ping.rs:70 — node/sync/src/ping.rs:70-85 | node/sync/src/ping.rs:89-104 — These two members are one piece of code written twice and then edited apart: 16 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (9 corresponding lines) · ×2
  • Edited copy of a member (9 corresponding lines) node/bft/src/helpers/ready.rs:90 — node/bft/src/helpers/ready.rs:90-98 | node/bft/src/helpers/ready.rs:101-109 — These two members are one piece of code written twice and then edited apart: 9 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (9 corresponding lines) node/bft/events/src/helpers/codec.rs:41 — node/bft/events/src/helpers/codec.rs:41-50 | node/src/bootstrap_client/codec.rs:43-51 — These two members are one piece of code written twice and then edited apart: 9 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (5 corresponding lines) · ×2
  • Edited copy of a member (5 corresponding lines) node/bft/src/helpers/pending.rs:101 — node/bft/src/helpers/pending.rs:101-108 | node/bft/src/helpers/pending.rs:116-120 — These two members are one piece of code written twice and then edited apart: 5 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (5 corresponding lines) node/bft/events/src/challenge_response.rs:34 — node/bft/events/src/challenge_response.rs:34-39 | node/bft/events/src/helpers/handshake.rs:351-355 — These two members are one piece of code written twice and then edited apart: 5 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (7 corresponding lines) · ×2
  • Edited copy of a member (7 corresponding lines) node/bft/events/src/validators_response.rs:32 — node/bft/events/src/validators_response.rs:32-41 | node/bft/events/src/worker_ping.rs:46-52 — These two members are one piece of code written twice and then edited apart: 7 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (7 corresponding lines) node/bft/src/sync/mod.rs:1086 — node/bft/src/sync/mod.rs:1086-1094 | node/consensus/src/lib.rs:881-887 — These two members are one piece of code written twice and then edited apart: 7 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (3 corresponding lines) · ×2
  • Edited copy of a member (3 corresponding lines) node/sync/src/block_sync.rs:351 — node/sync/src/block_sync.rs:351-353 | node/tcp/src/helpers/connections.rs:81-83 — These two members are one piece of code written twice and then edited apart: 3 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (3 corresponding lines) node/bft/src/helpers/cache.rs:125 — node/bft/src/helpers/cache.rs:125-127 | node/router/src/helpers/cache.rs:203-205 — These two members are one piece of code written twice and then edited apart: 3 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Duplicated block (11 lines × 2) · ×2
  • Duplicated block (11 lines × 2) node/sync/src/block_sync.rs:1339 — node/sync/src/block_sync.rs:1339-1349 | node/sync/src/block_sync.rs:1442-1452 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
  • Duplicated block (11 lines × 2) node/sync/src/ping.rs:75 — node/sync/src/ping.rs:75-85 | node/sync/src/ping.rs:94-104 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `node/sync/src/ping.rs:75` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D4 · Code Duplication · Duplicated block (6 lines × 2) · ×2
  • Duplicated block (6 lines × 2) node/bft/src/gateway.rs:878 — node/bft/src/gateway.rs:878-883 | node/bft/src/gateway.rs:891-896 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `node/bft/src/gateway.rs:878` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (6 lines × 2) node/router/src/handshake.rs:184 — node/router/src/handshake.rs:184-189 | node/router/src/handshake.rs:268-273 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
AXI1 · Runtime container hardening · Container process runs as root · ×1
  • Container process runs as root: metrics-prometheus-1 — 'metrics-prometheus-1' (ubuntu/prometheus:2.33-22.04_beta) runs as uid 0 — no user was specified, or one resolving to root was. Observed on the running container, which is the only place the answer is settled: an image's own USER, a base image's inherited one and a compose override are all invisible to a Dockerfile reader. Advisory evidence for CRA Annex I (2)(b).
AXR1 · Runtime accessibility (rendered) · WCAG 1.4.3 reproducibly failed in a rendered surface · ×1
  • WCAG 1.4.3 reproducibly failed in a rendered surface — axe-core rule(s) color-contrast failed on: .alert-light, .cm-placeholder, .d-block, .dropdown-toggle, .execute-btn. Runtime evidence (advisory — not scored); fix and re-scan to verify it clears.
AXR1 · Runtime accessibility (rendered) · WCAG 4.1.2 reproducibly failed in a rendered surface · ×1
  • WCAG 4.1.2 reproducibly failed in a rendered surface — axe-core rule(s) aria-allowed-attr, aria-conditional-attr, aria-deprecated-role, aria-hidden-body, aria-hidden-focus, aria-input-field-name, aria-prohibited-attr, aria-required-attr, aria-roles, aria-valid-attr, aria-valid-attr-value, button-name, duplicate-id-aria, label, link-name, nested-interactive failed on: .cm-content. Runtime evidence (advisory — not scored); fix and re-scan to verify it clears.
D1 · Cyclomatic Complexity · Inbound · ×1
  • Inbound::inbound (cyclomatic 47) node/router/src/inbound.rs:80 — Inbound::inbound has cyclomatic complexity 47 (threshold 15). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Where every arm is uniform — the same kind of value, with no behaviour of its own — a table keyed by the case is the shorter form; wherever the arms carry different data or different behaviour, keep them as cases, because collapsing those trades an explicit, reviewable set of cases for nothing.
D1 · Cyclomatic Complexity · BFT · ×1
  • BFT::commit_leader_certificate (cyclomatic 27) node/bft/src/bft.rs:596 — BFT::commit_leader_certificate has cyclomatic complexity 27 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · Sync · ×1
  • Sync::try_sync_storage_with_block (cyclomatic 23) node/bft/src/sync/mod.rs:805 — Sync::try_sync_storage_with_block has cyclomatic complexity 23 (threshold 15). To reduce it, separate the branches: extract each independent case into its own named function so the top-level body reads as a short sequence of named decisions.
D1 · Cyclomatic Complexity · Node · ×1
  • Node::perform_auto_checkpoints (cyclomatic 21) node/src/node.rs:388 — Node::perform_auto_checkpoints has cyclomatic complexity 21 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · BlockSync · ×1
  • BlockSync::prepare_block_requests (cyclomatic 20) node/sync/src/block_sync.rs:975 — BlockSync::prepare_block_requests has cyclomatic complexity 20 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · Account · ×1
  • Account::parse (cyclomatic 17) cli/src/commands/account.rs:114 — Account::parse has cyclomatic complexity 17 (threshold 15). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Where every arm is uniform — the same kind of value, with no behaviour of its own — a table keyed by the case is the shorter form; wherever the arms carry different data or different behaviour, keep them as cases, because collapsing those trades an explicit, reviewable set of cases for nothing.
D1 · Cyclomatic Complexity · Developer · ×1
  • Developer::handle_transaction (cyclomatic 17) cli/src/commands/developer/mod.rs:434 — Developer::handle_transaction has cyclomatic complexity 17 (threshold 15). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Where every arm is uniform — the same kind of value, with no behaviour of its own — a table keyed by the case is the shorter form; wherever the arms carry different data or different behaviour, keep them as cases, because collapsing those trades an explicit, reviewable set of cases for nothing.
D1 · Cyclomatic Complexity · Storage · ×1
  • Storage::sync_certificate_with_block (cyclomatic 17) node/bft/src/helpers/storage.rs:915 — Storage::sync_certificate_with_block has cyclomatic complexity 17 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D15 · Churn × Complexity Hotspots · Repeated repair · ×1
  • Repeated repair: node/router/messages/src/helpers/codec.rs node/router/messages/src/helpers/codec.rs:96 — node/router/messages/src/helpers/codec.rs changed 8 times in last 90 days and 5 of those changes were fix/bug commits, so repair is the majority of this file's churn. Its max cyclomatic complexity is 5 (its worst body is MessageCodec::decode at line 96), AT OR UNDER the 15 threshold, so this is deliberately not filed as a churn × complexity hotspot — the difficulty here is in the behaviour the file has to get right, not in its control flow, and refactoring it for complexity would be the wrong move. The repairs counted were: “fix(router): tighten MAX_PING_MESSAGE_SIZE from 16 MiB to 2 MiB”; “fix(router): reject an excluded message type outright, not just oversized”; “fix(router): cap the size of a Ping message”; “fix(router): address review findings on the transaction overhead cap”. Each one is a case this code did not handle. Before the next change lands here, check that every one of them is pinned by a test that fails without its fix; where the same area keeps coming back, the durable fix is usually at the interface that keeps being misused rather than at the line that was last corrected. Counted over 2026-08-15..2026-11-13, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-15 13:07:12 -07:00' --until='2026-11-13 13:07:12 -07:00' --full-history --no-merges -- node/router/messages/src/helpers/codec.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
D2 · Cognitive Complexity · Inbound · ×1
  • Inbound::inbound (cognitive 64) node/router/src/inbound.rs:80 — Inbound::inbound has cognitive complexity 64 (threshold 15). Drivers by points: if/else 18 (33 pts), match/switch 16 (30 pts), boolean chains 1 (nesting depth added 29). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · Node · ×1
  • Node::perform_auto_checkpoints (cognitive 40) node/src/node.rs:388 — Node::perform_auto_checkpoints has cognitive complexity 40 (threshold 15). Drivers by points: if/else 13 (28 pts), loops 3 (5 pts), match/switch 2 (5 pts), boolean chains 2 (nesting depth added 20). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · Developer · ×1
  • Developer::handle_transaction (cognitive 27) cli/src/commands/developer/mod.rs:434 — Developer::handle_transaction has cognitive complexity 27 (threshold 15). Drivers by points: match/switch 7 (17 pts), if/else 7 (10 pts) (nesting depth added 13). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
D2 · Cognitive Complexity · BootstrapClient · ×1
  • BootstrapClient::perform_handshake (cognitive 24) node/src/bootstrap_client/handshake.rs:115 — BootstrapClient::perform_handshake has cognitive complexity 24 (threshold 15). Drivers by points: if/else 10 (20 pts), match/switch 2 (4 pts) (nesting depth added 12). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · Router · ×1
  • Router::handshake (cognitive 22) node/router/src/handshake.rs:86 — Router::handshake has cognitive complexity 22 (threshold 15). Drivers by points: if/else 9 (18 pts), match/switch 2 (3 pts), boolean chains 1 (nesting depth added 10). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · BFTMemoryService · ×1
  • BFTMemoryService::insert_transmissions (cognitive 19) node/bft/storage-service/src/memory.rs:72 — BFTMemoryService::insert_transmissions has cognitive complexity 19 (threshold 15). Drivers by points: if/else 4 (13 pts), match/switch 2 (4 pts), loops 2 (nesting depth added 11). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PeerPoolHandling · ×1
  • PeerPoolHandling::insert_candidate_peers (cognitive 17) node/network/src/peering.rs:206 — PeerPoolHandling::insert_candidate_peers has cognitive complexity 17 (threshold 15). Drivers by points: if/else 7 (9 pts), match/switch 2 (4 pts), boolean chains 3, loops 1 (nesting depth added 4). To reduce it, split the body: this score is breadth rather than depth — many checks laid out side by side rather than nested inside one another, so inverting conditions into early returns has nothing left to flatten. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D2 · Cognitive Complexity · snarkos · ×1
  • snarkos::snarkos::main (cognitive 16) snarkos/main.rs:74 — snarkos::snarkos::main has cognitive complexity 16 (threshold 15). Drivers by points: loops 4 (7 pts), if/else 4 (6 pts), boolean chains 2, match/switch 1 (nesting depth added 5). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D29 · Static Analysis (SAST) · REDACTED · ×1
  • REDACTED
D3 · God Classes · TooManyFields · ×1
  • TooManyFields: Start cli/src/commands/start.rs:140 — TooManyFields — 45 stored fields beside 12 methods. The bar is 30 stored fields; this is 15 over it, 1.50× the bar. This is width in DATA, not behaviour: every reader that takes the whole type couples to all of its fields, so a change to any one of them is a change every reader has to be checked against. To reduce it, group the fields that are read together by the same callers into a smaller type of their own, and have this one hold that type as a single member — each reader then names only the group it uses.
D30 · Dependency Vulnerabilities · Medium advisory (unsound) · ×1
  • REDACTED
D31 · IaC & Container Security · Medium IaC · ×1
  • REDACTED
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
D4 · Code Duplication · Near-duplicate member pair (25 shared lines) · ×1
  • Near-duplicate member pair (25 shared lines) node/router/src/handshake.rs:175 — node/router/src/handshake.rs:175-248 | node/router/src/handshake.rs:258-343 — These two members are variants of one another: 25 of their lines are already reported as duplicated blocks below, spread through both bodies rather than gathered into one. Read them as a single construct written twice. The repair is at the members' grain — factor the shared pipeline into one implementation the two call with their differences as parameters or as an injected step, or, where the difference is systematic (sync against async, one transport against another), generate one from the other. Extracting the individual blocks below is not the same fix: it leaves the two bodies in place and the next edit still has to be made twice.
D4 · Code Duplication · Members sharing a duplicated core (5 members, 50+ identical tokens) · ×1
  • Members sharing a duplicated core (5 members, 50+ identical tokens) node/rest/src/routes.rs:387 — node/rest/src/routes.rs:387-411 | node/rest/src/routes.rs:426-454 | node/rest/src/routes.rs:468-493 | node/rest/src/routes.rs:514-545 | node/rest/src/routes.rs:565-598 — These 5 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 5 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 5 times.
D4 · Code Duplication · Edited copy of a member (83 corresponding lines) · ×1
  • Edited copy of a member (83 corresponding lines) node/src/client/mod.rs:418 — node/src/client/mod.rs:418-500 | node/src/client/mod.rs:503-588 — These two members are one piece of code written twice and then edited apart: 83 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (41 corresponding lines) · ×1
  • Edited copy of a member (41 corresponding lines) node/tcp/src/protocols/disconnect.rs:49 — node/tcp/src/protocols/disconnect.rs:49-92 | node/tcp/src/protocols/on_connect.rs:41-81 — These two members are one piece of code written twice and then edited apart: 41 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (46 corresponding lines) · ×1
  • Edited copy of a member (46 corresponding lines) node/bft/src/gateway.rs:1195 — node/bft/src/gateway.rs:1195-1245 | node/router/src/heartbeat.rs:275-320 — These two members are one piece of code written twice and then edited apart: 46 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (39 corresponding lines) · ×1
  • Edited copy of a member (39 corresponding lines) node/bft/src/sync/mod.rs:1007 — node/bft/src/sync/mod.rs:1007-1045 | node/bft/src/worker.rs:572-623 — These two members are one piece of code written twice and then edited apart: 39 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (40 corresponding lines) · ×1
  • Edited copy of a member (40 corresponding lines) cli/src/commands/account.rs:230 — cli/src/commands/account.rs:230-269 | cli/src/commands/account.rs:272-311 — These two members are one piece of code written twice and then edited apart: 40 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (28 corresponding lines) · ×1
  • Edited copy of a member (28 corresponding lines) node/bft/src/worker.rs:442 — node/bft/src/worker.rs:442-469 | node/bft/src/worker.rs:481-513 — These two members are one piece of code written twice and then edited apart: 28 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (38 corresponding lines) · ×1
  • Edited copy of a member (38 corresponding lines) node/src/node.rs:112 — node/src/node.rs:112-154 | node/src/node.rs:200-237 — These two members are one piece of code written twice and then edited apart: 38 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (15 corresponding lines) · ×1
  • Edited copy of a member (15 corresponding lines) node/rest/src/routes.rs:684 — node/rest/src/routes.rs:684-698 | node/rest/src/routes.rs:706-727 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copies of one member (3 members, 18+ corresponding lines) · ×1
  • Edited copies of one member (3 members, 18+ corresponding lines) node/bft/src/helpers/proposal.rs:197 — node/bft/src/helpers/proposal.rs:197-214 | node/bft/src/helpers/proposal_cache.rs:113-131 | node/sync/locators/src/block_locators.rs:357-374 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 18 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication · Edited copy of a member (21 corresponding lines) · ×1
  • Edited copy of a member (21 corresponding lines) node/src/client/mod.rs:599 — node/src/client/mod.rs:599-619 | node/src/validator/mod.rs:552-576 — These two members are one piece of code written twice and then edited apart: 21 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (8 corresponding lines) · ×1
  • Edited copy of a member (8 corresponding lines) node/bft/src/helpers/pending.rs:123 — node/bft/src/helpers/pending.rs:123-130 | node/bft/src/helpers/pending.rs:133-143 — These two members are one piece of code written twice and then edited apart: 8 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copies of one member (3 members, 11+ corresponding lines) · ×1
  • Edited copies of one member (3 members, 11+ corresponding lines) node/router/messages/src/helpers/codec.rs:79 — node/router/messages/src/helpers/codec.rs:79-89 | node/src/bootstrap_client/codec.rs:57-67 | node/src/bootstrap_client/codec.rs:73-83 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 11 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication · Edited copy of a member (26 corresponding lines) · ×1
  • Edited copy of a member (26 corresponding lines) node/router/src/outbound.rs:36 — node/router/src/outbound.rs:36-61 | node/router/src/outbound.rs:64-90 — These two members are one piece of code written twice and then edited apart: 26 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copies of one member (3 members, 8+ corresponding lines) · ×1
  • Edited copies of one member (3 members, 8+ corresponding lines) node/bft/events/src/challenge_request.rs:45 — node/bft/events/src/challenge_request.rs:45-54 | node/bft/events/src/helpers/handshake.rs:169-176 | node/router/messages/src/challenge_request.rs:42-51 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 8 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication · Edited copy of a member (13 corresponding lines) · ×1
  • Edited copy of a member (13 corresponding lines) node/sync/src/block_sync/metrics.rs:46 — node/sync/src/block_sync/metrics.rs:46-60 | node/sync/src/block_sync/metrics.rs:62-74 — These two members are one piece of code written twice and then edited apart: 13 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copies of one member (3 members, 7+ corresponding lines) · ×1
  • Edited copies of one member (3 members, 7+ corresponding lines) node/bft/events/src/challenge_response.rs:43 — node/bft/events/src/challenge_response.rs:43-49 | node/bft/events/src/helpers/handshake.rs:359-365 | node/bft/events/src/primary_ping.rs:65-75 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 7 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication · Edited copy of a member (6 corresponding lines) · ×1
  • Edited copy of a member (6 corresponding lines) ledger-distribution/src/blocks_bucket.rs:264 — ledger-distribution/src/blocks_bucket.rs:264-269 | node/bft/src/helpers/partition.rs:25-30 — These two members are one piece of code written twice and then edited apart: 6 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Duplicated block (26 lines × 2) · ×1
  • Duplicated block (26 lines × 2) cli/src/commands/account.rs:244 — cli/src/commands/account.rs:244-269 | cli/src/commands/account.rs:286-311 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `cli/src/commands/account.rs:244` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D4 · Code Duplication · Duplicated block (18 lines × 2) · ×1
  • Duplicated block (18 lines × 2) node/src/client/mod.rs:222 — node/src/client/mod.rs:222-239 | node/src/validator/mod.rs:205-222 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Read the line range as the matched WINDOW rather than a finished unit: at `node/src/client/mod.rs:222` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. The `return` at the foot of the matched lines is the enclosing body's own terminal exit, not an early one: it moves with them unchanged, and each site calls the extracted unit from the position that `return` occupied — no decision has to be handed back and re-acted on.
D4 · Code Duplication · Duplicated block (16–17 lines × 2) · ×1
  • Duplicated block (16–17 lines × 2) node/consensus/src/lib.rs:650 — node/consensus/src/lib.rs:650-665 | node/consensus/src/lib.rs:685-701 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `node/consensus/src/lib.rs:650` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
D4 · Code Duplication · Duplicated block (17 lines × 2) · ×1
  • Duplicated block (17 lines × 2) node/src/client/mod.rs:470 — node/src/client/mod.rs:470-486 | node/src/client/mod.rs:558-574 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `node/src/client/mod.rs:470` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D4 · Code Duplication · Duplicated block (15 lines × 3) · ×1
  • Duplicated block (15 lines × 3) cli/src/commands/account.rs:205 — cli/src/commands/account.rs:205-219 | cli/src/commands/account.rs:253-267 | cli/src/commands/account.rs:295-309 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited.
D4 · Code Duplication · Duplicated block (14–15 lines × 2) · ×1
  • Duplicated block (14–15 lines × 2) node/bft/events/src/challenge_request.rs:62 — node/bft/events/src/challenge_request.rs:62-75 | node/router/messages/src/challenge_request.rs:60-74 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice.
D4 · Code Duplication · Duplicated block (14 lines × 2) · ×1
  • Duplicated block (14 lines × 2) node/bft/src/sync/mod.rs:203 — node/bft/src/sync/mod.rs:203-216 | node/bft/src/worker.rs:522-535 — before extracting anything, compare `node/bft/src/sync/mod.rs` and `node/bft/src/worker.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 33 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place.
D4 · Code Duplication · Duplicated block (12 lines × 5) · ×1
  • Duplicated block (12 lines × 5) node/rest/src/routes.rs:395 — node/rest/src/routes.rs:395-406 | node/rest/src/routes.rs:438-449 | node/rest/src/routes.rs:477-488 | node/rest/src/routes.rs:529-540 | node/rest/src/routes.rs:582-593 — all 5 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `node/rest/src/routes.rs:395` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D4 · Code Duplication · Duplicated block (12 lines × 2) · ×1
  • Duplicated block (12 lines × 2) node/bft/src/sync/mod.rs:1017 — node/bft/src/sync/mod.rs:1017-1028 | node/bft/src/worker.rs:585-596 — before extracting anything, compare `node/bft/src/sync/mod.rs` and `node/bft/src/worker.rs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 33 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `node/bft/src/sync/mod.rs:1017` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D4 · Code Duplication · Duplicated block (3–10 lines × 3) · ×1
  • Duplicated block (3–10 lines × 3) node/router/src/handshake.rs:225 — node/router/src/handshake.rs:225-233 | node/router/src/handshake.rs:289-298 | node/src/bootstrap_client/handshake.rs:359-361 — there are 3 copies across 2 file(s) — more copies than files, so at least one file holds the block twice. Extract it once into a single shared function every call site can reach and call it from all 3 sites; resolving a subset leaves the remainder to drift apart. Read the line range as the matched WINDOW rather than a finished unit: at `node/src/bootstrap_client/handshake.rs:359` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `node/router/src/handshake.rs:286` calls `add_connecting_peer` and `node/router/src/handshake.rs:222` does not — after which the two agree again for 3 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
D4 · Code Duplication · Duplicated block (9 lines × 3) · ×1
  • Duplicated block (9 lines × 3) node/router/messages/src/helpers/codec.rs:81 — node/router/messages/src/helpers/codec.rs:81-89 | node/src/bootstrap_client/codec.rs:59-67 | node/src/bootstrap_client/codec.rs:75-83 — there are 3 copies across 2 file(s) — more copies than files, so at least one file holds the block twice. Extract it once into a single shared function every call site can reach and call it from all 3 sites; resolving a subset leaves the remainder to drift apart. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
D4 · Code Duplication · Duplicated block (10 lines × 2) · ×1
  • Duplicated block (10 lines × 2) node/router/src/handshake.rs:194 — node/router/src/handshake.rs:194-203 | node/router/src/handshake.rs:314-323 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
D4 · Code Duplication · Duplicated block (8 lines × 3) · ×1
  • Duplicated block (8 lines × 3) node/bft/ledger-service/src/lib.rs:52 — node/bft/ledger-service/src/lib.rs:52-59 | node/bft/src/helpers/mod.rs:58-65 | node/rest/src/lib.rs:665-672 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere all 3 call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made 3 times.
D4 · Code Duplication · Duplicated block (6 lines × 3) · ×1
  • Duplicated block (6 lines × 3) node/tcp/src/protocols/handshake.rs:52 — node/tcp/src/protocols/handshake.rs:52-57 | node/tcp/src/protocols/reading.rs:86-91 | node/tcp/src/protocols/writing.rs:85-90 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from all 3 call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `node/tcp/src/protocols/handshake.rs:52` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D44 · Platform End-of-Life · End-of-life runtime · ×1
  • End-of-life runtime: Rust 1.96 rust-toolchain.toml:1 — rust-toolchain.toml declares Rust 1.96 as this project's toolchain file, and Rust 1.96, superseded by 1.97 on 2026-07-09 (the Rust project patches only the current stable). An unsupported runtime receives no security patches, so every vulnerability disclosed in it since 2026-07-09 is present and unfixable without moving off it. This is a migration rather than an upgrade: there is no newer release of a runtime that has ended.
PF3 · Async & latency hygiene · Sync-over-async blocking · ×1
  • Sync-over-async blocking ledger-distribution/src/main.rs:119 — `run_fast_sync` is async and calls thread::sleep — a blocking call inside async code stalls the executor thread, and every task scheduled on it for as long as it runs.
X1 · Async correctness · Blocking `thread · ×1
  • Blocking `thread::sleep` inside an `async` body ledger-distribution/src/main.rs:146 — This `async` body is polled on an executor's worker thread, and `std::thread::sleep` blocks that thread: for the whole delay no other task scheduled on it makes progress — the Rust form of blocking on a task. Use `tokio::time::sleep(…).await` (or the runtime's own timer), which suspends only this task. Where the blocking work is not a sleep but a synchronous call that cannot be made async, move it off the executor with `tokio::task::spawn_blocking(…).await`.
Minor — 72 finding(s)
X4 · Structured logging · Interpolated log message defeats structured logging · ×40
  • Interpolated log message defeats structured logging utilities/src/signals.rs:134 — `error!` at line 134 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging utilities/src/signals.rs:162 — `error!` at line 162 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging snarkos/main.rs:65 — `debug!` at line 65 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging snarkos/main.rs:99 — `info!` at line 99 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging snarkos/main.rs:107 — `debug!` at line 107 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging snarkos/main.rs:170 — `error!` at line 170 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging node/tcp/src/tcp.rs:307 — `error!` at line 307 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging node/tcp/src/tcp.rs:315 — `trace!` at line 315 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging node/tcp/src/tcp.rs:320 — `debug!` at line 320 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging node/tcp/src/tcp.rs:342 — `error!` at line 342 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging node/tcp/src/tcp.rs:351 — `error!` at line 351 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging node/tcp/src/tcp.rs:401 — `debug!` at line 401 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging node/tcp/src/tcp.rs:406 — `debug!` at line 406 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging node/tcp/src/tcp.rs:408 — `warn!` at line 408 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging node/tcp/src/tcp.rs:467 — `debug!` at line 467 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging node/tcp/src/tcp.rs:472 — `error!` at line 472 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging node/tcp/src/tcp.rs:482 — `debug!` at line 482 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging node/tcp/src/tcp.rs:489 — `debug!` at line 489 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging node/tcp/src/tcp.rs:498 — `warn!` at line 498 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging node/tcp/src/tcp.rs:505 — `error!` at line 505 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging node/tcp/src/tcp.rs:522 — `debug!` at line 522 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging node/tcp/src/tcp.rs:525 — `debug!` at line 525 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `debug!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging node/tcp/src/tcp.rs:538 — `error!` at line 538 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging node/tcp/src/tcp.rs:568 — `warn!` at line 568 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • Interpolated log message defeats structured logging node/tcp/src/tcp.rs:571 — `warn!` at line 571 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
  • + 15 more in this group — see findings.md.
D34 · Knowledge Freshness · Orphaned file · ×11
  • Orphaned file node/bft/src/helpers/cache.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file account/src/lib.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file node/bft/ledger-service/src/helpers.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file node/bft/events/src/transmission_response.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file cli/src/helpers/dynamic_format.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file node/bft/src/helpers/partition.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file cli/src/commands/account/sign.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file cli/src/helpers/bech32m.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file node/bft/events/src/transmission_request.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file display/src/pages/logs.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file node/sync/src/block_sync/metrics.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
X10 · Duplicated predicate · Duplicated predicate · ×3
  • Duplicated predicate node/bft/src/sync/mod.rs:1022 — `num_sent_requests < num_redundant_requests || !stake_redundancy_reached()` appears character-identically in 2 files — node/bft/src/sync/mod.rs, node/bft/src/worker.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate node/src/prover/router.rs:76 — `self.router().get_connected_peer(listener_addr) && peer.node_type != NodeType::BootstrapClient` appears character-identically in 2 files — node/src/prover/router.rs, node/src/validator/router.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate node/network/src/peering.rs:128 — `self.trusted_peers_only() && !self.is_trusted(listener_addr)` appears character-identically in 2 files — node/network/src/peering.rs, node/router/src/handshake.rs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
D16 · Bus Factor · Off-boarding risk · ×2
  • Off-boarding risk: anonymized user #1 — If anonymized user #1 becomes unavailable, 7 significant file(s) lose their only recent owner: node/bft/storage-service/src/tests.rs, node/tcp/src/helpers/connections.rs, node/bft/storage-service/src/traits.rs, node/tcp/src/protocols/disconnect.rs, node/tcp/src/helpers/config.rs, node/tcp/src/protocols/mod.rs, node/tcp/src/protocols/on_connect.rs. Pair on, review, or document these before any departure.
  • Off-boarding risk: anonymized user #2 — If anonymized user #2 becomes unavailable, 6 significant file(s) lose their only recent owner: node/bft/src/helpers/upgrade_monitor.rs, node/rest/src/history_compat.rs, node/router/messages/src/helpers/codec.rs, node/router/messages/src/message_id.rs, node/router/messages/src/ping.rs, cli/src/helpers/log_fields.rs. Pair on, review, or document these before any departure.
D30 · Dependency Vulnerabilities · Medium advisory (unmaintained) · ×2
  • REDACTED
  • REDACTED
D16 · Bus Factor · Further sole-owners (lower concentration) · ×1
  • Further sole-owners (lower concentration) — 1 other contributor(s) are each the sole owner of a small amount of code below the off-boarding threshold — folded into the bus-factor score and metrics (15 single-owned of 149 analysed files in total, counted over production source files of roughly 2,400 bytes or more, excluding vendored, generated, example/demo and scaffolding-template trees and test files identified by path convention, largest first; 149 of the 178 production source files in this repository met that bar). They are anonymized user #3 (2 file(s)) — spread or document their files in the same way, at lower priority than the named off-boarding risks above. The files folded here: node/router/messages/src/helpers/disconnect.rs, node/sync/src/block_sync/helpers.rs.
D20 · ADR Quality · No ADRs found · ×1
  • No ADRs found Cargo.toml:276 — No ADRs found. No recognised ADR directory (`docs/adr/`, `docs/decisions/`, `adr/`, `docs/rfcs/`, an `ADR0001/` folder, or their siblings) exists anywhere in this tree. What was searched, so you can tell an empty log from a search that missed one: every directory under the tree (build output, dependencies and VCS metadata excepted), for a document that is either any non-index page inside a recognised ADR directory, whatever its name and however deeply nested (`docs/adr/use-postgres.md`, `docs/adr/2024/0001-x.md`); or a file anywhere whose name is ADR-shaped (`0001-use-postgres.md`, `adr-012-caching.md`); or, when neither turned anything up, a document carrying the decision-record signature (an "Architecture Decision Record" heading, or Status / Context / Decision / Consequences as section headings). A decision log that clears none of these — unnumbered files outside any recognised directory, without those headings — is not seen by this check and this row is then wrong. If that is your case, say so rather than renaming anything; otherwise, consider recording architectural decisions in `docs/adr/`. ADRs are expected here because `Cargo.toml` makes this repository a deployable product (line 276).
D28 · Secrets (history) · Rotate the exposed credentials · ×1
  • REDACTED
D34 · Knowledge Freshness · Orphaned files with no living knowledge · ×1
  • Orphaned files with no living knowledge — 11 of 149 analysed file(s) have no living knowledge left — their last meaningful change has decayed away, so if one breaks, no one currently understands it (counted over production source files of roughly 2,400 bytes or more, excluding vendored, generated, example/demo and scaffolding-template trees and test files identified by path convention, largest first; 149 of the 178 production source files in this repository met that bar). None is large enough to earn a read-through of its own, so this row stands in for the per-file rows rather than raising one each — most significant first: node/bft/src/helpers/cache.rs, account/src/lib.rs, node/bft/ledger-service/src/helpers.rs, node/bft/events/src/transmission_response.rs, cli/src/helpers/dynamic_format.rs, node/bft/src/helpers/partition.rs, cli/src/commands/account/sign.rs, cli/src/helpers/bech32m.rs (and 3 more). Attach the read to the next change that touches one of them: have a second person review that change, and leave behind a short comment or test recording what the file is for, so the knowledge comes back at the cost of a change you were making anyway.
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
M2 · Architecture documentation · No ADRs · ×1
  • No ADRs — No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
M2 · Architecture documentation · No architecture diagram/doc · ×1
  • No architecture diagram/doc — No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.
P4 · Deployment & Rollback · No rollback/health safety · ×1
  • No rollback/health safety — Deployment is orchestrated by compose, but no service declares a `healthcheck:` and nothing pins a previous image to fall back to — the runtime can tell that the container is up, not that it is serving, so a bad release is harder to detect and reverse.
P6 · Release Hygiene · No changelog · ×1
  • No changelog — No CHANGELOG/HISTORY/RELEASES file — what shipped when isn't easy to reconstruct for support or audit. (Versioning/tagging makes releases traceable, but a changelog records the what.)
S1 · Web-Security Posture · No app-layer HTTPS enforcement detected · ×1
  • No app-layer HTTPS enforcement detected — This repository starts an HTTP server and nothing in its Rust source or committed `Rocket.toml` secures the transport: no TLS served (actix-web `bind_rustls`/`bind_openssl`, axum-server `bind_rustls` with a `RustlsConfig`, tonic `ServerTlsConfig`, a `TlsAcceptor`, Rocket's `[default.tls]`), no `Strict-Transport-Security` header, no `X-Forwarded-Proto` read from a TLS-terminating proxy — so its traffic may cross the network in clear text. (−2.0 on this card.) The server: `axum::serve(` (node/rest/src/lib.rs:519).
S1 · Web-Security Posture · No security response headers detected · ×1
  • No security response headers detected — None of the 11 security response headers the OWASP Secure Headers Project recommends (Content-Security-Policy, Strict-Transport-Security, X-Content-Type-Options, X-Frame-Options, …) is set on a response this repository's Rust server sends — defense in depth, even when a proxy could set them. (−2.0 on this card.) The server: `axum::serve(` (node/rest/src/lib.rs:519).
Minor — 11 finding(s)
D12 · Dependency Hygiene · Outdated · ×11
  • Outdated: cfg-if — `cfg-if` is locked at 1.0.4 but 1.0.5 is the current stable release on crates.io, and it already satisfies the `"1"` requirement declared in node/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p cfg-if` and commit the updated REDACTED.
  • Outdated: rpassword — `rpassword` is locked at 7.5.4 but 7.5.5 is the current stable release on crates.io, and it already satisfies the `"7.4.0"` requirement declared in cli/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p rpassword` and commit the updated REDACTED.
  • Outdated: self_update — `self_update` is locked at 1.3.1 but 1.3.3 is the current stable release on crates.io, and it already satisfies the `"1.0.0-rc.6"` requirement declared in cli/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p self_update` and commit the updated REDACTED.
  • Outdated: serde_json — `serde_json` is locked at 1.0.151 but 1.0.154 is the current stable release on crates.io, and it already satisfies the `"1"` requirement declared in cli/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p serde_json` and commit the updated REDACTED.
  • Outdated: sha2 — `sha2` is locked at 0.11.0 but 0.11.1 is the current stable release on crates.io, and it already satisfies the `"0.11"` requirement declared in ledger-distribution/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p sha2` and commit the updated REDACTED.
  • Outdated: smol_str — `smol_str` is locked at 0.3.6 but 0.3.7 is the current stable release on crates.io, and it already satisfies the `"0.3"` requirement declared in node/bft/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p smol_str` and commit the updated REDACTED.
  • Outdated: thiserror — `thiserror` is locked at 2.0.20 but 2.0.21 is the current stable release on crates.io, and it already satisfies the `"2"` requirement declared in cli/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p thiserror` and commit the updated REDACTED.
  • Outdated: tokio-util — `tokio-util` is locked at 0.7.19 but 0.7.20 is the current stable release on crates.io, and it already satisfies the `"0.7"` requirement declared in node/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p tokio-util` and commit the updated REDACTED.
  • Outdated: toml — `toml` is locked at 1.1.6+spec-1.1.0 but 1.2.1+spec-1.1.0 is the current stable release on crates.io, and it already satisfies the `"1"` requirement declared in Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p toml` and commit the updated REDACTED.
  • Outdated: ureq — `ureq` is locked at 3.5.0 but 3.5.2 is the current stable release on crates.io, and it already satisfies the `"3"` requirement declared in cli/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p ureq` and commit the updated REDACTED.
  • Outdated: zeroize — `zeroize` is locked at 1.9.0 but 1.9.1 is the current stable release on crates.io, and it already satisfies the `"1"` requirement declared in cli/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p zeroize` and commit the updated REDACTED.

Appendix B — Reproduction & audit trail

Every external tool invocation behind a deep-scan dimension — the tool, its captured version, the exact command, how many findings it yielded, and a link to the retained raw output. To reproduce any finding: check out the same commit and run the command shown (repo-relative — never an absolute scratch path). The complete raw scanner output is retained verbatim under artifacts/raw/ (indexed in artifacts/raw/index.json); per-invocation exit codes and wall-clock durations are in sidecar.json — kept out of this table so the rendered report stays byte-identical across runs of the same commit.

DimensionToolVersionCommandFindingsRaw output
D28 · Secrets (history)gitleaks—gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-e911d916b770497ebf592d426840579d/history.json --exit-code 0 --source .29artifacts/raw/gitleaks-history.json
D28 · Secrets (history)gitleaks—gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-e911d916b770497ebf592d426840579d/tree.json --exit-code 0 --source .7artifacts/raw/gitleaks-tree.json
D29 · Static Analysis (SAST)semgrep—semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/canine-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off --exclude *.arrow --exclude *.avro --exclude *.csv --exclude *.dat --exclude *.db --exclude *.feather --exclude *.geojson --exclude *.h5 --exclude *.hdf5 --exclude *.jsonl --exclude *.log --exclude *.ndjson --exclude *.npy --exclude *.npz --exclude *.orc --exclude *.parquet --exclude *.pickle --exclude *.pkl --exclude *.psv --exclude *.sqlite --exclude *.sqlite3 --exclude *.tfrecord --exclude *.tsv --exclude *.txt .15artifacts/raw/semgrep.json
D30 · Dependency Vulnerabilitiesosv-scanner—osv-scanner --format json --recursive --experimental-disable-plugins transitivedependency/requirements --experimental-disable-plugins dotnet/csproj --experimental-disable-plugins dotnet/nugetcpm .5artifacts/raw/osv-scanner.json
D31 · IaC & Container Securitytrivy—trivy config --format json --quiet .2artifacts/raw/trivy-config.json
D32 · Data Compliance (PII/GDPR)semgrep—semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.0—
D37 · Vulnerability-disclosure Policydisclosure—disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.0—
D40 · Network Egress Confinementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.0—
D41 · Kernel & Syscall Confinementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.0—
D42 · Runtime Threat Enforcementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.0—
D43 · Malicious Dependenciesosv-scanner—osv-scanner --format json --recursive --experimental-disable-plugins transitivedependency/requirements --experimental-disable-plugins dotnet/csproj --experimental-disable-plugins dotnet/nugetcpm .0artifacts/raw/osv-scanner.json

Run 01a1dbad-63ea-767f-9006-6b8b77259d54 · every finding is also locatable in findings.md, and the complete scoring record (with exit codes + durations) in sidecar.json.

Downloadable artifacts

Machine-readable and reproducible from this commit + frozen rubric — drop them straight into a contract appendix, a CRA dossier, or a downstream SCA / VEX tool.

⬇ Findings, MITRE CWE-tagged .sarif⬇ Health changelog .md