Executive summary
Dominux/clean-architecture-blog is rated At risk because critical security findings are open, most of them in the packages it uses. Its score is held back in part because the project has no automated tests. It scores 41 out of 100, which the At risk rating leaves unchanged.
Production Readiness, at 13, is the weakest lens and counts most in the score. The best first step is adding automated tests, worth about 21 points. Recording design decisions comes next, worth about 7 points. Raising Production Readiness to 70 would lift the score to about 64.
Eighty-one known security holes in the packages the code depends on can be used by attackers. Two settings leave the servers or containers unsafe, and the project has no automated tests, so a change can break it without warning. Adding automated tests, updating the vulnerable packages and correcting the unsafe settings would close these risks. The use of a package that isn't listed needs adding to the project's list of dependencies.
The product code is 535 lines, too few for a meaningful rebuild estimate.
If Production Readiness rose from 13 to 70, the lowest score rated Strong, the score would rise from 41 to about 64.
New since the last survey: 10 findings
- Dependency Vulnerabilities · REDACTED
- Dependency Vulnerabilities · REDACTED
- Dependency Vulnerabilities · REDACTED
- Dependency Vulnerabilities · REDACTED
- Dependency Vulnerabilities · REDACTED
- Dependency Vulnerabilities · REDACTED
- Dependency Vulnerabilities · REDACTED
- Dependency Vulnerabilities · REDACTED
- Dependency Vulnerabilities · REDACTED
- Dependency Vulnerabilities · REDACTED
Fixed since the last survey: 11 findings
- Dependency Vulnerabilities · High CVE: [GHSA redacted] REDACTED
- Dependency Vulnerabilities · High CVE: REDACTED REDACTED
- Dependency Vulnerabilities · High CVE: REDACTED REDACTED
- Dependency Vulnerabilities · High CVE: [GHSA redacted] REDACTED
- Dependency Vulnerabilities · High CVE: REDACTED REDACTED
- Dependency Vulnerabilities · High CVE: REDACTED REDACTED
- Dependency Vulnerabilities · High vulnerability: REDACTED REDACTED
- Dependency Vulnerabilities · Medium CVE: REDACTED REDACTED
- Dependency Vulnerabilities · Medium CVE: REDACTED REDACTED
- Dependency Vulnerabilities · Medium CVE: REDACTED REDACTED
- Dependency Vulnerabilities · Medium CVE: [GHSA redacted] REDACTED
Top priorities
Diagnosis: what the measurements show together
Architecture: which parts of the code depend on which
| uses → | 1 frontend.src.components | 2 frontend.src.layouts | 3 frontend.src.pages | 4 frontend.src.pages.types | 5 github.com/Dominux/clean_architecture_blog/cmd | 6 github.com/Dominux/clean_architecture_blog/internal/entities | 7 github.com/Dominux/clean_architecture_blog/internal/views | 8 frontend.src | 9 github.com/Dominux/clean_architecture_blog/internal/store | 10 github.com/Dominux/clean_architecture_blog/internal/services | 11 github.com/Dominux/clean_architecture_blog/internal/store/gormstore | 12 github.com/Dominux/clean_architecture_blog/internal/views/web |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 frontend.src.components | ||||||||||||
| 2 frontend.src.layouts | ||||||||||||
| 3 frontend.src.pages | ||||||||||||
| 4 frontend.src.pages.types | ||||||||||||
| 5 github.com/Dominux/clean_architecture_blog/cmd | ||||||||||||
| 6 github.com/Dominux/clean_architecture_blog/internal/entities | ||||||||||||
| 7 github.com/Dominux/clean_architecture_blog/internal/views | ||||||||||||
| 8 frontend.src | 1 | |||||||||||
| 9 github.com/Dominux/clean_architecture_blog/internal/store | 2 | |||||||||||
| 10 github.com/Dominux/clean_architecture_blog/internal/services | 1 | 2 | ||||||||||
| 11 github.com/Dominux/clean_architecture_blog/internal/store/gormstore | 2 | 3 | ||||||||||
| 12 github.com/Dominux/clean_architecture_blog/internal/views/web | 2 | 2 | 1 |
8→4 frontend.src uses frontend.src.pages.types✕
- Connections
- 1 pair of types, where a type in frontend.src uses a type in frontend.src.pages.types.
- The types involved
frontend.src.index→frontend.src.pages.types.PostData
- Direction
- frontend.src uses frontend.src.pages.types, so a change to frontend.src.pages.types can break frontend.src, while a change to frontend.src can't break frontend.src.pages.types.
- Position
- Below the diagonal: frontend.src uses a module listed above it, which is the healthy direction.
9→6 github.com/Dominux/clean_architecture_blog/internal/store uses github.com/Dominux/clean_architecture_blog/internal/entities✕
- Connections
- 2 pairs of types, where a type in github.com/Dominux/clean_architecture_blog/internal/store uses a type in github.com/Dominux/clean_architecture_blog/internal/entities.
- The types involved
github.com/Dominux/clean_architecture_blog/internal/store.CommentRepository→github.com/Dominux/clean_architecture_blog/internal/entities.Commentgithub.com/Dominux/clean_architecture_blog/internal/store.PostRepository→github.com/Dominux/clean_architecture_blog/internal/entities.Post
- Direction
- github.com/Dominux/clean_architecture_blog/internal/store uses github.com/Dominux/clean_architecture_blog/internal/entities, so a change to github.com/Dominux/clean_architecture_blog/internal/entities can break github.com/Dominux/clean_architecture_blog/internal/store, while a change to github.com/Dominux/clean_architecture_blog/internal/store can't break github.com/Dominux/clean_architecture_blog/internal/entities.
- Position
- Below the diagonal: github.com/Dominux/clean_architecture_blog/internal/store uses a module listed above it, which is the healthy direction.
10→6 github.com/Dominux/clean_architecture_blog/internal/services uses github.com/Dominux/clean_architecture_blog/internal/entities✕
- Connections
- 1 pair of types, where a type in github.com/Dominux/clean_architecture_blog/internal/services uses a type in github.com/Dominux/clean_architecture_blog/internal/entities.
- The types involved
github.com/Dominux/clean_architecture_blog/internal/services.PostService→github.com/Dominux/clean_architecture_blog/internal/entities.Post
- Direction
- github.com/Dominux/clean_architecture_blog/internal/services uses github.com/Dominux/clean_architecture_blog/internal/entities, so a change to github.com/Dominux/clean_architecture_blog/internal/entities can break github.com/Dominux/clean_architecture_blog/internal/services, while a change to github.com/Dominux/clean_architecture_blog/internal/services can't break github.com/Dominux/clean_architecture_blog/internal/entities.
- Position
- Below the diagonal: github.com/Dominux/clean_architecture_blog/internal/services uses a module listed above it, which is the healthy direction.
10→9 github.com/Dominux/clean_architecture_blog/internal/services uses github.com/Dominux/clean_architecture_blog/internal/store✕
- Connections
- 2 pairs of types, where a type in github.com/Dominux/clean_architecture_blog/internal/services uses a type in github.com/Dominux/clean_architecture_blog/internal/store.
- The types involved
github.com/Dominux/clean_architecture_blog/internal/services.PostService→github.com/Dominux/clean_architecture_blog/internal/store.Storegithub.com/Dominux/clean_architecture_blog/internal/services.services→github.com/Dominux/clean_architecture_blog/internal/store.Store
- Direction
- github.com/Dominux/clean_architecture_blog/internal/services uses github.com/Dominux/clean_architecture_blog/internal/store, so a change to github.com/Dominux/clean_architecture_blog/internal/store can break github.com/Dominux/clean_architecture_blog/internal/services, while a change to github.com/Dominux/clean_architecture_blog/internal/services can't break github.com/Dominux/clean_architecture_blog/internal/store.
- Position
- Below the diagonal: github.com/Dominux/clean_architecture_blog/internal/services uses a module listed above it, which is the healthy direction.
11→6 github.com/Dominux/clean_architecture_blog/internal/store/gormstore uses github.com/Dominux/clean_architecture_blog/internal/entities✕
- Connections
- 2 pairs of types, where a type in github.com/Dominux/clean_architecture_blog/internal/store/gormstore uses a type in github.com/Dominux/clean_architecture_blog/internal/entities.
- The types involved
github.com/Dominux/clean_architecture_blog/internal/store/gormstore.PostModel→github.com/Dominux/clean_architecture_blog/internal/entities.Usergithub.com/Dominux/clean_architecture_blog/internal/store/gormstore.PostRepository→github.com/Dominux/clean_architecture_blog/internal/entities.Post
- Direction
- github.com/Dominux/clean_architecture_blog/internal/store/gormstore uses github.com/Dominux/clean_architecture_blog/internal/entities, so a change to github.com/Dominux/clean_architecture_blog/internal/entities can break github.com/Dominux/clean_architecture_blog/internal/store/gormstore, while a change to github.com/Dominux/clean_architecture_blog/internal/store/gormstore can't break github.com/Dominux/clean_architecture_blog/internal/entities.
- Position
- Below the diagonal: github.com/Dominux/clean_architecture_blog/internal/store/gormstore uses a module listed above it, which is the healthy direction.
11→9 github.com/Dominux/clean_architecture_blog/internal/store/gormstore uses github.com/Dominux/clean_architecture_blog/internal/store✕
- Connections
- 3 pairs of types, where a type in github.com/Dominux/clean_architecture_blog/internal/store/gormstore uses a type in github.com/Dominux/clean_architecture_blog/internal/store.
- The types involved
github.com/Dominux/clean_architecture_blog/internal/store/gormstore.PostRepository→github.com/Dominux/clean_architecture_blog/internal/store.PostRepositorygithub.com/Dominux/clean_architecture_blog/internal/store/gormstore.Store→github.com/Dominux/clean_architecture_blog/internal/store.PostRepositorygithub.com/Dominux/clean_architecture_blog/internal/store/gormstore.Store→github.com/Dominux/clean_architecture_blog/internal/store.Store
- Direction
- github.com/Dominux/clean_architecture_blog/internal/store/gormstore uses github.com/Dominux/clean_architecture_blog/internal/store, so a change to github.com/Dominux/clean_architecture_blog/internal/store can break github.com/Dominux/clean_architecture_blog/internal/store/gormstore, while a change to github.com/Dominux/clean_architecture_blog/internal/store/gormstore can't break github.com/Dominux/clean_architecture_blog/internal/store.
- Position
- Below the diagonal: github.com/Dominux/clean_architecture_blog/internal/store/gormstore uses a module listed above it, which is the healthy direction.
12→7 github.com/Dominux/clean_architecture_blog/internal/views/web uses github.com/Dominux/clean_architecture_blog/internal/views✕
- Connections
- 2 pairs of types, where a type in github.com/Dominux/clean_architecture_blog/internal/views/web uses a type in github.com/Dominux/clean_architecture_blog/internal/views.
- The types involved
github.com/Dominux/clean_architecture_blog/internal/views/web.PostViews→github.com/Dominux/clean_architecture_blog/internal/views.PostViewsgithub.com/Dominux/clean_architecture_blog/internal/views/web.Views→github.com/Dominux/clean_architecture_blog/internal/views.PostViews
- Direction
- github.com/Dominux/clean_architecture_blog/internal/views/web uses github.com/Dominux/clean_architecture_blog/internal/views, so a change to github.com/Dominux/clean_architecture_blog/internal/views can break github.com/Dominux/clean_architecture_blog/internal/views/web, while a change to github.com/Dominux/clean_architecture_blog/internal/views/web can't break github.com/Dominux/clean_architecture_blog/internal/views.
- Position
- Below the diagonal: github.com/Dominux/clean_architecture_blog/internal/views/web uses a module listed above it, which is the healthy direction.
12→9 github.com/Dominux/clean_architecture_blog/internal/views/web uses github.com/Dominux/clean_architecture_blog/internal/store✕
- Connections
- 2 pairs of types, where a type in github.com/Dominux/clean_architecture_blog/internal/views/web uses a type in github.com/Dominux/clean_architecture_blog/internal/store.
- The types involved
github.com/Dominux/clean_architecture_blog/internal/views/web.Views→github.com/Dominux/clean_architecture_blog/internal/store.Storegithub.com/Dominux/clean_architecture_blog/internal/views/web.web→github.com/Dominux/clean_architecture_blog/internal/store.Store
- Direction
- github.com/Dominux/clean_architecture_blog/internal/views/web uses github.com/Dominux/clean_architecture_blog/internal/store, so a change to github.com/Dominux/clean_architecture_blog/internal/store can break github.com/Dominux/clean_architecture_blog/internal/views/web, while a change to github.com/Dominux/clean_architecture_blog/internal/views/web can't break github.com/Dominux/clean_architecture_blog/internal/store.
- Position
- Below the diagonal: github.com/Dominux/clean_architecture_blog/internal/views/web uses a module listed above it, which is the healthy direction.
12→10 github.com/Dominux/clean_architecture_blog/internal/views/web uses github.com/Dominux/clean_architecture_blog/internal/services✕
- Connections
- 1 pair of types, where a type in github.com/Dominux/clean_architecture_blog/internal/views/web uses a type in github.com/Dominux/clean_architecture_blog/internal/services.
- The types involved
github.com/Dominux/clean_architecture_blog/internal/views/web.PostViews→github.com/Dominux/clean_architecture_blog/internal/services.PostService
- Direction
- github.com/Dominux/clean_architecture_blog/internal/views/web uses github.com/Dominux/clean_architecture_blog/internal/services, so a change to github.com/Dominux/clean_architecture_blog/internal/services can break github.com/Dominux/clean_architecture_blog/internal/views/web, while a change to github.com/Dominux/clean_architecture_blog/internal/views/web can't break github.com/Dominux/clean_architecture_blog/internal/services.
- Position
- Below the diagonal: github.com/Dominux/clean_architecture_blog/internal/views/web uses a module listed above it, which is the healthy direction.
At a glance — Code Health
At a glance — Architecture
At a glance — Maturity
At a glance — Readiness
At a glance — Security
At a glance — Performance
Security & Compliance — OWASP Top-10 mapping
| OWASP category | Findings | Severity |
|---|---|---|
| A03:2025 — Software Supply Chain Failures | 118 | High / Critical |
| A02:2025 — Security Misconfiguration | 5 | High / Critical |
Roadmap
Top priorities: Resolve the 1 No automated tests finding(s) in Code Coverage; Resolve the 1 No tests found finding(s) in Test Distribution; Resolve the 1 No ADRs found finding(s) in ADR Quality.
| Do this | Helps | Effort | Dimension |
|---|---|---|---|
| Resolve the 1 No tests found finding(s) in Test Distribution. | +20.8 pts | Low | Test Distribution |
| Resolve the 1 No ADRs found finding(s) in ADR Quality. | +7.1 pts | Low | ADR Quality |
| Resolve the 1 No automated tests finding(s) in Code Coverage. | +20.8 pts | High | Code Coverage |
| Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them. | +6.0 pts | Medium | Architecture documentation |
| Add a CI workflow that builds and runs the test suite on every push/PR. | +2.9 pts | Medium | CI/CD gates |
| Add tests that import the unreached modules (directly or through their public entry). | +2.9 pts | Medium | Test Coverage |
| Expand the README with getting-started, architecture overview and a project map. | +1.5 pts | Medium | Documentation (README) |
| Replace GORM AutoMigrate with a versioned migration tool such as golang-migrate, goose or Atlas so the production schema can evolve safely and reproducibly. | +1.4 pts | Medium | Schema migrations |
File quality
| File | Score | Band | Worst signal |
|---|---|---|---|
| REDACTED | 0.0 | Slop | Dependency Vulnerabilities: Critical CVE: REDACTED |
| REDACTED | 1.1 | Slop | Dependency Vulnerabilities: Critical CVE: REDACTED |
| REDACTED | 2.0 | Slop | IaC & Container Security: High IaC: REDACTED |
| internal/views/web/post_views.go | 8.5 | Near-clean | Code Duplication: Duplicated block (10 lines × 2) |
How the grades work
A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.
Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.
Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.
Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.
Methodology & how to trust this report
This survey is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. All 64 evaluated dimensions are computed by tools and static analysis; no language model sets or judges any of them. Overall confidence is 0.9, the weighted average across measured dimensions.
What we checked — 64 dimensions across the health lenses
- Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 130 of 144 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line.
- Is there a tool behind the number? Every score below names the method that produced it: Roslyn, git or a scanner, not a narrative.
- Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.
Tools & methods
| Method | Backs | Version | Evaluator |
|---|---|---|---|
| Roslyn static analysis | Complexity, cohesion, coupling, dead code, API surface, layering | 5.3.0 | ✓ deterministic |
| Native secret scanner | Hardcoded secrets / credentials | 1.0.0 | ✓ deterministic |
| Canine Code Analyzer duplication detector (in-process) | Code duplication | 1.0.0 | ✓ deterministic |
| Coverage (coverlet / dotnet-coverage) | Line & branch coverage | 10.0.400 | ✓ deterministic |
| NuGet / dotnet | Outdated, vulnerable & deprecated dependencies | 10.0.400 | ✓ deterministic |
| git / LibGit2Sharp | Churn hotspots, knowledge concentration, history | 2.43.0 · 0.31.0 | ✓ deterministic |
| gitleaks · semgrep · trivy · checkov | Secrets in history, SAST, CVEs, IaC & container, PII / GDPR | 1.86.0 · 0.69.3 · 3.2.533 | ✓ deterministic |
Run transparency — what happened this run
- D12 Dependency Hygiene — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Not scored — 0 direct Go requirement(s) out of 23 in 1 REDACTED were read for PINNING discipline and checksum coverage (0 defect(s) reported), but the outdated/deprecated signal needs the Go module proxy, which had no direct requirement to be asked about, so this dimension's own question is only partly answered. NOT a finding that these dependencies are current or healthy.
- D14 License Compliance — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. This repository declares a Go module (REDACTED/go.sum), but the licence verdict published here was taken over its npm package dependencies. Nothing was read about its Go dependencies' licensing in either direction, and a clean score on this card must not be read as covering them.
- D15 Churn × Complexity Hotspots — measured, with a gap in what it reached — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Git history depth insufficient — this repository has 28 commit(s), too few for a reliable trend signal. The clone is complete, so there is no deeper history to fetch: the signal returns as the project accumulates history.
- D16 Bus Factor — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Single-contributor repository — bus factor is not applicable (1 contributor(s) across 28 commit(s) sampled, automation and bot accounts excluded). Concentration needs a team to concentrate: with one contributor there is nobody to spread the knowledge to, so there is nothing here for the owner to act on.
- D19 Documentation Quality — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Each ecosystem's manifests (what makes a folder runnable or a published package) need their own proof before D19 judges its units. Until then those folders' READMEs are judged only as documents (boilerplate, structure), never counted as complete.
- D19 Documentation Quality — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This kind did not reach the 95 % precision gate in three adjudicated runs (docs/plans/deterministic-engine/adjudication/D19-sample3-v3.md), so by the pre-registered fallback it publishes no row until a re-measurement shows it does. The candidates are counted here, not reported as findings, and the score does not include them.
- D21 Naming Consistency — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D21's deterministic naming rules are gated on C# first (docs/plans/deterministic-engine.md, P5): each other language is switched on only after its own concept suite and A/B gate pass. Until then its declarations carry no naming verdict this run — this says nothing about whether its names are consistent.
- D22 Internal API Consistency — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D22 identifies the intentionally-exposed surface from `IsPackable` and `.Contracts` project names, MSBuild conventions read off the loaded project set. This target exposed no such projects, so the probe never ran; this says nothing about whether the repository has a public API. This repository commits no C#/VB source at all, so there was never an MSBuild project set to read these conventions off. That is OUR side and it is a COLLECTOR gap, not an environment fault: it declares a published package (REDACTED), but no published-package marker D22 reads admitted any project here, so this ecosystem's public API has no collector, and the remedy is to write one — no change to the scan image can close it.
- D24 Comment Value — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Each source language's comment syntax, and the code a comment annotates in it, needs its own proof before D24 judges it. Until then those comments are left unread, not counted as clean.
- D34 Knowledge Freshness — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Too few commits to judge knowledge freshness (28 commit(s) sampled).
- D35 Change Coupling — measured, with a gap in what it reached — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Git history depth insufficient — this repository has 28 commit(s), too few for a reliable change-coupling signal. The clone is complete, so there is no deeper history to fetch: the signal returns as the project accumulates history.
- AXR1 Runtime accessibility — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Render strategy: boot via DockerCompose (docker-compose.yaml). compose up failed (exit 17 — an image could not be built) — failed to solve: process "/bin/sh -c go mod download" did not complete successfully: exit code: 1; runtime evidence skipped.
- C1 Data Protection — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These personal data controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks personal data controls.
- C2 Access Controls — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These authorization controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks authorization controls.
- C3 Audit Trail — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These audit controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks audit controls.
- C4 Data Retention — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These retention controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks retention controls.
- C5 Data-Subject Rights — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These data-subject rights controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks data-subject rights controls.
- GD1 Unfinished & placeholder code — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, F#, JavaScript/TypeScript, Dart, Ruby and Scala source only, and this repository's Go is most of its product and is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- IC1 Incompleteness & stubs — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, JavaScript/TypeScript, Java, Dart, Ruby and Scala source only, and this repository's Go is most of its product and is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- S1 Web-Security Posture — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These web-security controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks web-security controls.
- X27 Collection changed while being enumerated — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and Java, Rust, Erlang, F#, Python, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded, no Java, Rust, Erlang, F#, Python, Dart, Ruby, Scala or Kotlin was found, and this repository's Go is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X4 Structured logging — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Python, PHP, Dart, Ruby, Scala and Rust source only, and no C# was loaded, and this repository's JavaScript/TypeScript, Python and PHP make no call through a named logger, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
Limitations & what we did not check
We assess the repository exactly as committed, and only the repository. By design we do not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.
Per-dimension blind spots
- D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
- D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
- D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
- D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
- D5 Coupling: Coupling is measured between projects/assemblies — runtime coupling through DI, reflection, messaging or shared databases is invisible to a static reference graph.
- D6 Cohesion (LCOM4): LCOM4 cohesion is syntactic — it infers connectivity from which methods touch which fields/methods by name, not from real runtime behaviour or intent.
- D8 Code Coverage: Coverage is measured by building and running the test suite inside our isolated image — the target repo is never modified, and nothing on your systems runs. So coverage exists only when the suite builds and runs within the inline time budget; one that needs external services, can't build, or exceeds the budget yields no coverage (D8 then degrades to not-measured, not a low score). Line coverage also says nothing about assertion quality.
- D9 Test Distribution: The test-pyramid shape is inferred from project/folder naming and references, with a single test host bucketed per-file by its path tier and content signals — a suite that names tiers unconventionally and gives no per-file signal can still be mis-bucketed.
- D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
- D14 License Compliance: License compatibility is checked against declared package metadata and a policy — mislabelled or missing license metadata, and obligations that depend on how you distribute, are not resolved here.
- D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
- D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
- D20 ADR Quality: ADR quality checks the structure of the decision records present: it cannot know about decisions made and never recorded, and it does not judge how well a record argues its case. Records in a language the section lexicon does not cover are not evaluated.
- D26 Project Cohesion: Project focus is sized from members/namespaces per project — a project that is broad by deliberate design reads the same as one that has sprawled.
- D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
- D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
- D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
- D31 IaC & Container Security: IaC scanning checks Dockerfiles/Terraform/Kubernetes against best-practice rules — it cannot see the live cloud account, runtime configuration, or drift between the committed config and what is actually deployed.
- D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
- D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
- D44 Platform End-of-Life: The support table is FROZEN, so it goes out of date by losing RECALL: a release that ended support after the table was written is missed until the table is refreshed, and this dimension reading 10 is not evidence that a platform is current. Only platforms the repository DECLARES in a place this pass reads are seen — a runtime named only in a REDACTED (D31's subject), in a CI workflow (D29's), or in a file this pass does not parse (REDACTED, a Gemfile ruby directive) is invisible here, which is why a repository declaring none of them abstains rather than scoring. Only frameworks with a PUBLISHED support policy are tracked: React, Flask and Express publish none, so their age cannot be judged and their absence from a report is not a statement that they are supported.
- AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
- P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".
Dimensions
D1 · Cyclomatic Complexity
0 method(s) exceeded the cyclomatic complexity threshold of 15.
D2 · Cognitive Complexity
0 method(s) exceeded the cognitive complexity threshold of 15.
D3 · God Classes
0 god class(es) detected.
D4 · Code Duplication
1 duplicated block group(s) detected. Measured on part of this repository only: .tsx (24% of production source) was not exposed to THIS dimension's token comparison and is not in this count; duplication there is measured by R10 Code Duplication, the frontend lens's card running the same clone algorithm over the JS/TS token stream.
What to do
- Resolve the 1 Duplicated block (10 lines × 2) finding(s) in Code Duplication — start with post_views.go. — One of this dimension's main actionable groups (1 warning-level).
- Stand up a CI pipeline, then gate Code Duplication in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Verified — provenance only; does not change the score.
D5 · Coupling
2 production modules (npm+Go), 0 dependency cycle(s), 0 unstable depended-on module(s). Read from the build's own module declarations; 0 module(s) off the main sequence.
D6 · Cohesion (LCOM4)
0 of 3 classes have LCOM4 above 3.
D8 · Code Coverage
No automated tests — no test code was found in this repository.
What to do
- Resolve the 1 No automated tests finding(s) in Code Coverage. — One of this dimension's main actionable groups (1 issue-level).
- Stand up a CI pipeline, then gate Code Coverage in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Verified — provenance only; does not change the score.
D9 · Test Distribution
No test suite found.
What to do
- Resolve the 1 No tests found finding(s) in Test Distribution. — One of this dimension's main actionable groups (1 recommendation-level).
D13 · Secret Scanning
Secret scan ran and found no leaked secrets.
D14 · License Compliance
0 of 1304 shipped npm package(s) use a banned license. Licences were resolved from registry.npmjs.org over the 1304 package(s) this repository's committed lockfile installs for a consumer — its 20 production, optional and peer dependency(ies), across 1 product package.json manifest(s), and everything those install in turn. Its 0 `devDependencies` declaration(s), and every package only they reach, are excluded: a consumer installs none of them. ★ Each licence is the one the registry publishes for the package's CURRENT release rather than for the pinned version, which is the same caveat the Hex and RubyGems arms carry. 1 of them publish no licence this pass can read on registry.npmjs.org — an absent field, `UNLICENSED`, or a `SEE LICENSE IN <file>` pointer into a tarball this pass does not download; that is missing data, not a violation, and none of them is charged. ★ COVERAGE OF THIS VERDICT: it grades this repository's npm package dependencies and nothing else. The repository also declares a Go module (REDACTED/go.sum), and the licences of those dependencies were NOT read by this pass — a gap in this engine's coverage, not a statement about them. So this result says the graded closure carries no banned licence; it does NOT say this repository's licensing is clear.
D15 · Churn × Complexity Hotspots
No churn × complexity hotspots in the window.
D17 · Explicit Debt
0 deducted task-comment markers across 535 LoC (0.0/KLoC) → score 10.0. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.
D20 · ADR Quality
No architecture decision records were found.
What to do
- Resolve the 1 No ADRs found finding(s) in ADR Quality. — One of this dimension's main actionable groups (1 recommendation-level).
D26 · Project Cohesion
0 of 2 build units (Go, npm) flagged as possibly oversized/incoherent.
D28 · Secrets (history)
gitleaks scanned the full history AND the current working tree and found no secrets.
D29 · Static Analysis (SAST)
semgrep found no security issues.
D30 · Dependency Vulnerabilities
118 finding(s): 21 critical, 60 high, 29 medium, 8 low.
What to do
- Resolve the 58 High CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (56), REDACTED (2). — One of this dimension's main actionable groups (58 issue-level).
- Resolve the 20 Critical CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (18), REDACTED (2). — One of this dimension's main actionable groups (20 issue-level).
- Resolve the 2 High vulnerability finding(s) in Dependency Vulnerabilities — start with REDACTED (2). — One of this dimension's main actionable groups (2 issue-level).
D31 · IaC & Container Security
5 finding(s): 0 critical, 2 high, 2 medium, 1 low.
What to do
- Resolve the 2 High IaC finding(s) in IaC & Container Security — start with REDACTED (2). — One of this dimension's main actionable groups (2 issue-level).
- Resolve the 2 Medium IaC finding(s) in IaC & Container Security — start with REDACTED (2). — One of this dimension's main actionable groups (2 warning-level).
- Resolve the 1 Low IaC finding(s) in IaC & Container Security — start with REDACTED. — One of this dimension's main actionable groups (1 recommendation-level).
D35 · Change Coupling
No strong hidden change-coupling between production files.
D43 · Malicious Dependencies
No dependency in any ecosystem this repository declares is published as malicious.
D44 · Platform End-of-Life
0 end-of-life runtime(s) and 0 end-of-life framework(s), read from 1 platform declaration(s) and 0 dependency declaration(s). This dimension reads what the repository says about ITSELF — a pinned target framework, a version file, a capped requires-python, a Rust toolchain pin, a framework major a constraint cannot move off. A FLOOR is deliberately never charged: `requires-python = ">=3.8"` states what the package SUPPORTS, not what it runs on, and a well-maintained library declares exactly that while running its own CI on a current release. The end-of-life facts are FROZEN and dated, so this dimension needs no network and answers identically inside a closed scan fence; as the table ages it loses recall and never precision, because a statement about support that ended in the past cannot become false. The OS layer of a container image is D31's question and the toolchain a CI workflow installs is D29's; this row is neither.
Frontend & cross-cutting dimensions
AX10 · Code composition
What to do
- The domain core is a small share of production code, but most of the rest matched no layer vocabulary at all — so this is not yet an anemic-domain finding. The namespace/path convention could not place that code, which makes the composition above a statement about the naming, not about the design. Name the layers (or check that the repository's conventions differ from the ones this check knows) before reading a thin domain into it.
AX2 · Stateful singletons
AX3 · Project dependency cycles
AX4 · Dependency direction
M1 · Documentation (README)
- The root README is 67 words, against a bar of 120. Of the three newcomer-critical sections this check looks for by heading, in the README and in the repository documents it links, it found no a testing section. Sections are matched on HEADING text only, so material written under a heading this check does not recognise — or with no heading at all — is not seen and this row may understate what the document covers. — README.md:1
What to do
- Expand the README with getting-started, architecture overview and a project map.
- Explain in the README how to run the tests. Add a section called Testing to the README in the repository's top folder, saying how to run the test suite.
M2 · Architecture documentation
- No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
- No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.
What to do
- Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
- Add a C4 context/container diagram (Structurizr, PlantUML or Mermaid) or an architecture.md overview.
M3 · Folder & project structure
What to do
- Add `*_test.go` files beside the packages they cover — `go test` compiles only those, in-package, so the suffix IS the separation (a tests/ folder is anti-idiomatic in Go) — and run `go test ./...` in CI.
P1 · CI/CD gates
- No CI workflow found (.github/workflows, azure-pipelines.yml, .gitlab-ci.yml, …) — changes aren't gated by an automated build/test.
What to do
- Add a CI workflow that builds and runs the test suite on every push/PR.
P2 · Observability
What to do
- Consider OpenTelemetry tracing/metrics (go.opentelemetry.io/otel) and a health-check endpoint (a /healthz handler) for operability.
P3 · Security & performance tooling
- No static application security testing detected. For this repository's stack, add gosec / govulncheck (or golangci-lint) (or `semgrep --config=auto`, which runs on any language) — this repository has no CI pipeline yet, so run it locally to clear the existing findings, then make it a step of the first workflow you add so a regression fails the build. What was searched, so you can tell an absence from a miss: the 0 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner.
- `frontend/package.json` declares packages, and nothing in the repository keeps them current: no Dependabot or Renovate configuration that schedules updates, and no dependency-review gate on pull requests. A pinned dependency stays at the version it was added at until someone notices — including after an advisory is published against it. Add a `.github/dependabot.yml` with one `package-ecosystem` entry per ecosystem the tree uses (or an enabled `renovate.json`), and gate pull requests with `actions/dependency-review-action`. — frontend/package.json:5
What to do
- Run what this repository's stack ships: gosec / govulncheck (or golangci-lint) — or `semgrep --config=auto`, which runs on any language — locally for now, since there is no CI pipeline here yet, and as a step of the first workflow you add so a security regression fails the build instead of landing.
- Enable Dependabot/Renovate or a dependency-review gate.
- Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
P4 · Deployment & Rollback
- Deployment is orchestrated by compose, but no service declares a `healthcheck:` and nothing pins a previous image to fall back to — the runtime can tell that the container is up, not that it is serving, so a bad release is harder to detect and reverse.
What to do
- Add a `healthcheck:` to the served compose service — probing the endpoint it already answers on where it has one — with `depends_on: condition: service_healthy` on whatever waits for it, and keep the deployed image tag immutable and recorded so rolling back is re-pointing at the previous tag rather than rebuilding.
- Add an approval/environment gate (required reviewers / protection rules) before production promotion.
P8 · Schema migrations
- GORM AutoMigrate builds the schema from the model at startup and keeps no migration history, so there is no reviewed, repeatable upgrade path for an existing production database — a renamed column is dropped and re-added rather than migrated. Adopt a versioned migration tool such as golang-migrate, goose or Atlas, so every schema change is a versioned file applied the same way in every environment. — internal/store/gormstore/store.go:19
What to do
- Replace GORM AutoMigrate with a versioned migration tool such as golang-migrate, goose or Atlas so the production schema can evolve safely and reproducibly.
PF3 · Async & latency hygiene
R1 · Type Safety
R10 · Code Duplication
R2 · Cyclomatic Complexity
R3 · Large Files
R4 · Test Coverage
- 0% of 8 production file(s) reachable from 0 test file(s) via the import graph — 'production' here is the RESIDUE: every source file left once tests, tooling, generated output, config, declarations and declaration-only modules, fixture corpora, type fixtures, behaviour-free data modules, re-export barrels, registration/constant data modules and service workers are set aside, so the percentage is taken over a smaller denominator than the workspace's file count
What to do
- Add tests that import the unreached modules (directly or through their public entry).
R6 · Tooling
- test ✓ · lint ✗ · typecheck ✗ — read from this repository's package.json scripts and corroborated against its CI workflows. A script counts when its name or command matches the step: `test` for the suite, `lint` or `prettier` for linting, `typecheck`/`type-check`/`tsc` for type checking. ✗ therefore means no script or CI step under those names was found, NOT that the step is absent from your pipeline — a task invoked by a runner this check does not read, or named something else entirely, is not seen and is worth confirming before acting on a cross. A ✓ means the wiring is DECLARED — a script or CI step under those names exists. It is not a statement that the step passes, or that it runs at all: nothing here installs a dependency or executes a suite.
What to do
- Add eslint and `tsc --noEmit` as package.json scripts and run them in CI.
R7 · Dead Code
R8 · Dependency Hygiene
- Imported but not declared in any reachable package.json — installs work only by hoisting accident. — frontend/src/layouts/default.tsx:8
- Declared in frontend/package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it. (×3)
What to do
- Remove unused dependencies, declare unlisted imports explicitly, and demote type-/test-only packages to devDependencies.
R9 · Circular Imports
X1 · Async correctness
X12 · Unreachable branch
X13 · Undrained process stream
X14 · Bypassable address classification
X15 · Unvalidated length from an untrusted reader
X16 · Unfloored truncation loop
X17 · Uncapped recursion over a caller-supplied document
X18 · Disposal-pattern correctness
X19 · Unrestored process-global state
X2 · Cancellation propagation
- Only 0/1 async functions that make a cancellable request (fetch, axios, ky, ofetch, got, undici, node:http) accept an AbortSignal or pass one on, so a request keeps running after whatever wanted it has given up — a page navigated away from, an unmounted component, a timed-out job. Take a `signal` (or an options object that carries one) and hand it to the request; where nothing could ever cancel the call, omitting it is a deliberate choice — judge against how the function is used.
- `getPosts` awaits `axios.get(…)` but neither accepts an AbortSignal nor passes one on, so its caller cannot stop the request once it has started. Accept `{ signal }` and pass it through: `axios.get(url, { signal })`. — frontend/src/pages/index.tsx:7
What to do
- Thread an AbortSignal through async functions that make requests, so the work stops when its caller gives up.
X21 · Side-effecting pattern guard
X22 · Contradicted release guard
X23 · Unguarded diagnostic materialisation
X24 · Document value interpolated into markup unescaped
X25 · Inert configuration knob
X26 · Unsynchronised callback handoff
X28 · Index access outside its own emptiness guard
X29 · Per-element action decided by a fixed element
X3 · Exception handling
- `if err != nil` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter. — cmd/main.go:22
What to do
- Swallowed exception (caught, then discarded)
X30 · Support guard that admits what it rejects
X5 · Nullable reference types
Reference — by lens
| Lens | Score | Rating | Impact |
|---|---|---|---|
| Code Health | 76% | Strong | Solid. |
| Architecture | 69% | Adequate | Acceptable, with room to improve. |
| Maturity | 52% | Adequate — gated by M2 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Readiness | 13% | Critical — gated by D8, D9, R4, R6, P1, P3, P8 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Security | 98% | Checked 4 of 10 | Solid. |
| Performance | 100% | Exemplary | Strongest area. |
Not evidenced — 5 control(s) we could not find positive evidence for
- C3 Audit Trail — Not assessed: these audit controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks audit controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C4 Data Retention — Not assessed: these retention controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks retention controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C5 Data-Subject Rights — Not assessed: these data-subject rights controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks data-subject rights controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
- P6 Release Hygiene — not evidenced — no changelog, version stamp or semver release tag in the repo
Not included — 62 check(s) not relevant to this codebase
- AC1 Text alternatives — Frontend below the scale floor (14 DOM element(s) < 25) — too little surface to assess accessibility.
- AC2 Forms & labels — Frontend below the scale floor (14 DOM element(s) < 25) — too little surface to assess accessibility.
- AC3 Page structure — Frontend below the scale floor (14 DOM element(s) < 25) — too little surface to assess accessibility.
- AC4 Keyboard semantics — Frontend below the scale floor (14 DOM element(s) < 25) — too little surface to assess accessibility.
- AC5 ARIA correctness — Frontend below the scale floor (14 DOM element(s) < 25) — too little surface to assess accessibility.
- AC6 Visual & motion safety — Frontend below the scale floor (14 DOM element(s) < 25) — too little surface to assess accessibility.
- AC7 A11y enforcement — Frontend below the scale floor (14 DOM element(s) < 25) — too little surface to assess accessibility.
- AX1 Captive dependencies — Not applicable: this repository's Go imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's; this repository's TypeScript imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's.
- AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX6 Interface segregation — no exported interface declares behaviour
- AX7 Slice cohesion — not applicable — not a vertical-slice architecture
- AX8 Test isolation — no test/production split to check
- AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
- AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- AXR1 Runtime accessibility — compose up failed (exit 17 — an image could not be built) — failed to solve: process "/bin/sh -c go mod download" did not complete successfully: exit code: 1; runtime evidence skipped This is a statement about this run, not a statement about your application: nothing here says the surface is inaccessible, only that it was never rendered.
- C1 Data Protection — Not assessed: these personal data controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks personal data controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C2 Access Controls — Not assessed: these authorization controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks authorization controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- D10 Test Quality — No tests were found in the analyzed repository to assess for quality.
- D11 Test Reliability — No test suite was found to re-run, so reliability couldn't be assessed. Two searches produced that zero and both came back empty: the classifier that reads the loaded workspace recognised no suite it could run, and a walk of the source on disk — which covers the JS/TS `*.test.*` and `*.spec.*` conventions and probes for a Pester suite — found no test source in any other ecosystem either. Neither search reaches a suite that is missing from the loaded workspace and carries no name either walk recognises, so this is 'no suite found by those two searches', not a verdict that the repository has none.
- D12 Dependency Hygiene — Not scored — 0 direct Go requirement(s) out of 23 in 1 REDACTED were read for PINNING discipline and checksum coverage (0 defect(s) reported), but the outdated/deprecated signal needs the Go module proxy, which had no direct requirement to be asked about, so this dimension's own question is only partly answered. NOT a finding that these dependencies are current or healthy.
- D16 Bus Factor — single-contributor repository — bus factor is not applicable
- D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
- D19 Documentation Quality — D19 reads .NET projects and npm packages as units; 1 folder(s) declared by REDACTED were not judged for an overview, an example or the map.
- D21 Naming Consistency — Naming consistency is measured on C# and TypeScript only; Go not measured.
- D22 Internal API Consistency — The exposed public-API surface could not be collected — no C#/VB projects loaded.
- D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ sibling projects each declaring an entity of their own or taking another project's integration events. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
- D24 Comment Value — D24 reads C#, Visual Basic, TypeScript and JavaScript comments only; comments in this repository's .go source were not judged.
- D25 ADR Conformance — no ADRs to check
- D27 Navigability — symbol resolution incomplete — navigability not assessed
- D32 Data Compliance (PII/GDPR) — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.
- D34 Knowledge Freshness — too few commits to judge knowledge freshness
- D36 Supply-chain Provenance & Signing — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .circleci, .buildkite, .woodpecker, .teamcity, .gitlab-ci.yml, .travis.yml, bitbucket-pipelines.yml, .drone.yml, .cirrus.yml, .woodpecker.yml, appveyor.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, .azuredevops/, Jenkinsfile); there is no build to attest provenance for.
- D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
- D39 IL Efficiency — D39 measures the IL emitted by a .NET build; this repository has no .NET solution or project files, so the dimension does not apply.
- D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
- D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
- D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
- D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
- DM1 Domain Modelling — applicable but not scored (1 of 2 signals for this style — below the bar we score at): 2 domain repository interface(s) (*Repository over an in-repo domain type)
- ED1 Event-Driven — not scored — this repository shows none of the 3 signals this lens looks for
- ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
- ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
- GD1 Unfinished & placeholder code — no source files were read — this check reads C#, F#, JavaScript/TypeScript, Dart, Ruby and Scala, and none was read for this repository's product. That is a limit of the analyzer, not a finding about your code.
- IC1 Incompleteness & stubs — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- M4 Documentation accuracy — Not applicable: the 1 current-state document(s) make no claim of a kind M4 checks.
- P12 CI test-gate honesty — no CI workflow found
- P7 Outbound HTTP resilience — no outbound HTTP usage detected — no HTTP client call or construction in the Go, JavaScript/TypeScript source (service entry point: cmd/main.go:34 (gin.Default())
- P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (`go test -coverprofile=coverage.out ./...`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures, or wire coverage collection into CI, to enable this cross-layer check
- PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for a `func BenchmarkXxx(b *testing.B)` in any `_test.go` file, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
- PF2 Allocation hygiene — Not scored: this check counted allocation-aware idioms (Span, pools, stackalloc) per line, which describes what kind of code a repository is rather than whether it has an allocation problem, so it was withdrawn. Nothing here is a finding about your code.
- R11 Import Boundaries — No recognizable feature-sliced/layered src layout — boundary rules not applicable.
- R5 Dependency Freshness — uses a yarn lockfile — dependency freshness not measured here; JS/npm CVEs are scored in D30 (Dependency Vulnerabilities), which answers every ecosystem
- S1 Web-Security Posture — Not assessed: these web-security controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks web-security controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- SC1 Supply-chain hygiene — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X10 Duplicated predicate — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X20 Mistyped argument guard — This check asks whether an argument guard reports an EMPTY value as a NULL one, which needs a language that throws a null-specific argument exception — .NET's ArgumentNullException, the JVM's NullPointerException, Dart's ArgumentError.notNull. This repository contains none of those languages: the ones it is written in have a single exception for a bad argument, so there is no pair of exceptions to confuse and nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
- X27 Collection changed while being enumerated — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
- X4 Structured logging — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X7 Silent fallback defaults — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Appendix A — Findings (grouped)
Critical — 85 finding(s)
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- No automated tests
- Unlisted import '@mui/system' frontend/src/layouts/default.tsx:8
Serious — 41 finding(s)
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- Duplicated block (10 lines × 2) internal/views/web/post_views.go:52
- No CI pipeline
- Schema created by GORM AutoMigrate (no migration path) internal/store/gormstore/store.go:19
- Test Coverage
- No lint or typecheck script
- Unused dependency '@emotion/react'
- Unused dependency '@emotion/styled'
- Unused dependency '@testing-library/react'
- Async function without AbortSignal: getPosts frontend/src/pages/index.tsx:7
- Swallowed exception (caught, then discarded) cmd/main.go:22
Minor — 18 finding(s)
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- No ADRs found
- REDACTED
- No tests found
- Thin README README.md:1
- No ADRs
- No architecture diagram/doc
- No SAST
- No dependency-update automation frontend/package.json:5
- No rollback/health safety
- Not all async functions that make a request accept an AbortSignal
Appendix B — Reproduction & audit trail
| Dimension | Tool | Version | Command | Findings | Raw output |
|---|---|---|---|---|---|
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-e2bb90080aa348e2a8e31fc7903a29dc/history.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-e2bb90080aa348e2a8e31fc7903a29dc/tree.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-tree.json |
| D29 · Static Analysis (SAST) | semgrep | — | semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/canine-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off --exclude *.arrow --exclude *.avro --exclude *.csv --exclude *.dat --exclude *.db --exclude *.feather --exclude *.geojson --exclude *.h5 --exclude *.hdf5 --exclude *.jsonl --exclude *.log --exclude *.ndjson --exclude *.npy --exclude *.npz --exclude *.orc --exclude *.parquet --exclude *.pickle --exclude *.pkl --exclude *.psv --exclude *.sqlite --exclude *.sqlite3 --exclude *.tfrecord --exclude *.tsv --exclude *.txt . | 0 | artifacts/raw/semgrep.json |
| D30 · Dependency Vulnerabilities | trivy | — | trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs **/bin/** --skip-dirs **/obj/** . --skip-db-update | 118 | artifacts/raw/trivy-fs.json |
| D31 · IaC & Container Security | trivy | — | trivy config --format json --quiet . | 5 | artifacts/raw/trivy-config.json |
| D32 · Data Compliance (PII/GDPR) | semgrep | — | semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that. | 0 | — |
| D36 · Supply-chain Provenance & Signing | provenance | — | provenance: not applicable — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .circleci, .buildkite, .woodpecker, .teamcity, .gitlab-ci.yml, .travis.yml, bitbucket-pipelines.yml, .drone.yml, .cirrus.yml, .woodpecker.yml, appveyor.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, .azuredevops/, Jenkinsfile); there is no build to attest provenance for. | 0 | — |
| D37 · Vulnerability-disclosure Policy | disclosure | — | disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed. | 0 | — |
| D40 · Network Egress Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here. | 0 | — |
| D41 · Kernel & Syscall Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here. | 0 | — |
| D42 · Runtime Threat Enforcement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here. | 0 | — |
| D43 · Malicious Dependencies | trivy | — | trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs **/bin/** --skip-dirs **/obj/** . --skip-db-update | 0 | artifacts/raw/trivy-fs.json |