Public report of Devolutions/UniGetUI, published 12 November 2026. It has the same score, grades and number of findings as the full report. The details of security findings (where they are in the code, which known vulnerabilities and which passwords or keys were found) are left out, so nobody can use them against the project.
Public
Executive report Measured under the Code Assurance Index, an open standard for code quality, using its published scoring rules (rubric version 2026.11.3). Assert signed this survey and filed it in the standard's public register, where anyone can look it up by its survey ID. Check this survey → Signed and filed in the standard's public register, 12 November 2026, 00:48 UTC · Survey ID cd_65a323bc0f3f48a3b7bbe9e427453d2c

Devolutions/UniGetUI

Measured 12 November 2026, 00:47 UTC, at code version 894a0a0

Boundary Type-Coupling is not measured: Bounded contexts not declared.

CAI score 47out of 100 Weak
CriticalWeakAdequateStrongExemplary
Up 6 since the last survey

The score is built from these lenses. Each lens grades one area of the code, such as how easy it is to change or how well it is protected. The weakest lens counts most, so one weak area pulls the score down instead of being averaged away.

A large codebase: 149,784 lines of product code in 107 projects, tests not counted · Estimated rebuild effort: about 3.7 person-years · Weakest lens: Security and Compliance, 37

Findings by how serious they are

165 critical 1222 serious 129 minor

6 dimensions are left out of the score. For each one, we either couldn't measure it in this code, or found no evidence of the safeguard we look for, such as a tested backup restore. They count neither for nor against the score, and Limitations lists each one with its reason.

This survey was produced by

Assert small markCanine Code Analyzer
Producer
Canine Development
Analyzer
Canine Code Analyzer engine 1.0.0
Measured
12 November 2026, 00:47 UTC

A measurement, not a certificate. The Code Assurance Index records a number together with the evidence it was worked out from, so anyone can recalculate it, but it doesn't certify or guarantee the code. The standard was written by Canine Development, which also builds the Canine Code Analyzer. It is open to any tool that implements it, and today the Canine Code Analyzer is the only one that does.

The score is deterministic, which means the same code always gets the same score. We work it out with tools that follow published rules, and an AI model never decides it, so anyone who applies the same rules to the same code gets the same number. How it is done is explained under Methodology ▸

72of 72 dimensions measured by tools.
1491of 1516 findings point to an exact file and line, so you can open each one in the code. The other 25 concern the repository as a whole, such as missing documentation.
72dimensions across 6 lenses, read from 149,784 lines of product code in 107 projects.
Chapters

Executive summary

Devolutions/UniGetUI falls short of our standard for production, in part because it has pipeline tools referenced by a changeable name. It scores 47 out of 100 and is rated Weak, and 84 of its 165 critical findings are security problems.

Security and Compliance, at 37, is the weakest lens and counts most in the score. The best first step for the work it takes is replacing the five passwords or keys found in the code's history, worth about 4 points. Encrypting the sensitive stored data and keeping its keys in a vault would lift Security and Compliance itself, worth about 6 points. Raising Security and Compliance to 70 would lift the score to about 56.

Sixty-six pipeline tools are referenced by a changeable name, so the build pipeline can be tampered with. Five passwords or keys are open to anyone who can read the repository, and sixty-four errors are caught and ignored, so failures can go unnoticed. Pinning each tool to an exact version, replacing each exposed password or key and handling or logging the ignored errors would close these risks. Fixing the weaknesses the scanner points to would fix the five security weaknesses in the code, and limiting each secret to its own step would deal with the three secrets exposed to more of the pipeline than needed. The five inner parts of the code that depend on an outer part need turning around so they point inward.

The product code is 149,784 lines, about €540,000 to rebuild.

A lens is capped at Adequate while one of its dimensions scores below 4 out of 10, however well the rest of the lens does. That way a serious problem in one place always shows in the lens's rating.

How the score is built: what each lens counts for The lenses don't count equally. The weakest lens counts most, the next weakest a little less, and so on, so a weak area pulls the score down instead of being averaged away. In the bar below, each part's width shows how much that lens counts and its colour shows its rating. Improving the widest part moves the score most, and as that lens improves, it counts for less, because another lens becomes the weakest.
Security and Compliance 37 · counts for 46%Code Health 52 · counts for 25%Production Readiness 53 · counts for 14%Performance 60 · counts for 8%Maturity 66 · counts for 4%Architecture 71 · counts for 2%

If Security and Compliance rose from 37 to 70, the lowest score rated Strong, the score would rise from 47 to about 56.

Code composition: what the lines of code are
Business logic 38%Supporting code 25%Tests 37%
New since the last survey: 572 findings

These 572 critical or serious findings weren't in the previous survey, on 23 October 2026. The first 100 are listed here, and the findings file in the download package lists them all.

  • Cyclomatic Complexity · AddCommand.RunInner (cyclomatic 122) src/UniGetUI.AgentSkills.Cli/AddRun.cs
  • Cyclomatic Complexity · SearchMultiselect.Run (cyclomatic 100) src/UniGetUI.AgentSkills.Cli/SearchMultiselect.cs
  • Cyclomatic Complexity · UpdateCommand.UpdateGlobalSkills (cyclomatic 47) src/UniGetUI.AgentSkills.Cli/Update.cs
  • Cyclomatic Complexity · SyncCommand.Run (cyclomatic 42) src/UniGetUI.AgentSkills.Cli/Sync.cs
  • Cyclomatic Complexity · AddCommand.HandleWellKnownSkills (cyclomatic 40) src/UniGetUI.AgentSkills.Cli/AddWellKnown.cs
  • Cyclomatic Complexity · UpdateCommand.UpdateProjectSkills (cyclomatic 35) src/UniGetUI.AgentSkills.Cli/Update.cs
  • Cyclomatic Complexity · AvaloniaAutoUpdater.PrepareAndLaunchAsync (cyclomatic 32) src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs
  • Cyclomatic Complexity · ValidateCommand.StripInstallMetadata (cyclomatic 32) src/UniGetUI.AgentSkills.Cli/Validate.cs
  • Cyclomatic Complexity · Program.Run (cyclomatic 28) src/UniGetUI.AgentSkills.Cli/Main.cs
  • Cyclomatic Complexity · Notion.PreparePackSource (cyclomatic 26) src/UniGetUI.AgentSkills.Cli/Notion.cs
  • Cyclomatic Complexity · ValidateCommand.CheckSkill (cyclomatic 26) src/UniGetUI.AgentSkills.Cli/Validate.cs
  • Cyclomatic Complexity · RemoveCommand.Run (cyclomatic 25) src/UniGetUI.AgentSkills.Cli/Remove.cs
  • Cyclomatic Complexity · Ui.Multiselect (cyclomatic 25) src/UniGetUI.AgentSkills.Cli/Ui.cs
  • Cyclomatic Complexity · PkgPayload.FindAppResources (cyclomatic 25) src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgPayload.cs
  • Cyclomatic Complexity · DetectAgent.DetermineAgent (cyclomatic 23) src/UniGetUI.AgentSkills.Cli/DetectAgent.cs
  • Cyclomatic Complexity · Ui.WrapLine (cyclomatic 23) src/UniGetUI.AgentSkills.Cli/Ui.cs
  • Cyclomatic Complexity · AgentSkillsViewModel.RefreshLibraryItems (cyclomatic 22) src/UniGetUI.Avalonia/ViewModels/Pages/AgentSkillsViewModel.cs
  • Cyclomatic Complexity · ListCommand.Run (cyclomatic 22) src/UniGetUI.AgentSkills.Cli/List.cs
  • Cyclomatic Complexity · SkillSourceLocator.Parse (cyclomatic 22) src/UniGetUI.Extensions.AgentSkills/Sources/SkillSourceLocator.cs
  • Cyclomatic Complexity · MainWindowViewModel.MainWindowViewModel.ctor (cyclomatic 21) src/UniGetUI.Avalonia/ViewModels/MainWindowViewModel.cs
  • Cyclomatic Complexity · AvaloniaBootstrapper.NavigateApp (cyclomatic 21) src/UniGetUI.Avalonia/Infrastructure/AvaloniaBootstrapper.cs
  • Cyclomatic Complexity · AddCommand.ParseOptions (cyclomatic 21) src/UniGetUI.AgentSkills.Cli/AddRun.cs
  • Cyclomatic Complexity · AddCommand.Run (cyclomatic 20) src/UniGetUI.AgentSkills.Cli/AddRun.cs
  • Cyclomatic Complexity · AgentSkillsService.Search (cyclomatic 20) src/UniGetUI.Extensions.AgentSkills/AgentSkillsService.cs
  • Cyclomatic Complexity · Scoop.ParseAvailableUpdates (cyclomatic 20) src/UniGetUI.PackageEngine.Managers.Scoop/Scoop.cs
  • Cyclomatic Complexity · PkgHelperCommand.InstallAsync (cyclomatic 19) src/UniGetUI.PackageEngine.Managers.MacPkg/PkgHelperCommand.cs
  • Cyclomatic Complexity · InstalledMatcher.FindByName (cyclomatic 19) src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/InstalledMatcher.cs
  • Cyclomatic Complexity · AgentPluginsViewModel.ChangeKnownItemAsync (cyclomatic 18) src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs
  • Cyclomatic Complexity · AgentPluginsViewModel.BrowseMarketplaceAsync (cyclomatic 18) src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs
  • Cyclomatic Complexity · GitRepositoriesViewModel.MeasureRepositoryAsync (cyclomatic 18) src/UniGetUI.Avalonia/ViewModels/Pages/GitRepositoriesViewModel.cs
  • Cyclomatic Complexity · SoftwareUpdatesPage.WhenPackagesLoaded (cyclomatic 18) src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs
  • Cyclomatic Complexity · GitRepositoryService.InspectAsync (cyclomatic 18) src/UniGetUI.Extensions.GitRepositories/GitRepositoryService.cs
  • Cyclomatic Complexity · NuGetV3Client.GetRegistrationVersions (cyclomatic 18) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs
  • Cyclomatic Complexity · NuGetV3Client.GetRegistrationPageEntry (cyclomatic 18) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs
  • Cyclomatic Complexity · AgentSkillsViewModel.LoadSkillsAsync (cyclomatic 17) src/UniGetUI.Avalonia/ViewModels/Pages/AgentSkillsViewModel.cs
  • Cyclomatic Complexity · AgentSkillsViewModel.CheckForUpdatesInBackgroundAsync (cyclomatic 17) src/UniGetUI.Avalonia/ViewModels/Pages/AgentSkillsViewModel.cs
  • Cyclomatic Complexity · PackagesPageViewModel.UpdateFilteredState (cyclomatic 17) src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs
  • Cyclomatic Complexity · PreviewCommand.ParseOptions (cyclomatic 17) src/UniGetUI.AgentSkills.Cli/Preview.cs
  • Cyclomatic Complexity · SyncCommand.DiscoverNodeModuleSkills (cyclomatic 17) src/UniGetUI.AgentSkills.Cli/Sync.cs
  • Cyclomatic Complexity · ValidateCommand.ValidatePath (cyclomatic 17) src/UniGetUI.AgentSkills.Cli/Validate.cs
  • Cyclomatic Complexity · GitRepositoryService.ParseWorktreeList (cyclomatic 17) src/UniGetUI.Extensions.GitRepositories/GitRepositoryService.cs
  • Cyclomatic Complexity · UpgradablePackagesLoader.IsPackageValid (cyclomatic 17) src/UniGetUI.PackageEngine.PackageLoader/UpgradablePackagesLoader.cs
  • Cyclomatic Complexity · PeReader.Read (cyclomatic 17) src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/PeReader.cs
  • Cyclomatic Complexity · MainWindowViewModel.NavigateToAsync (cyclomatic 16) src/UniGetUI.Avalonia/ViewModels/MainWindowViewModel.cs
  • Cyclomatic Complexity · SettingsBasePage.CreatePageForType (cyclomatic 16) src/UniGetUI.Avalonia/Views/Pages/SettingsPages/SettingsBasePage.axaml.cs
  • Cyclomatic Complexity · SharedPreUiCommandDispatcher.TryHandle (cyclomatic 16) src/Shared/SharedPreUiCommandDispatcher.cs
  • Cyclomatic Complexity · UseCommand.ParseOptions (cyclomatic 16) src/UniGetUI.AgentSkills.Cli/Use.cs
  • Cyclomatic Complexity · PersistedEnvironment.ComputeChanges (cyclomatic 16) src/UniGetUI.Core.Tools/PersistedEnvironment.cs
  • Cyclomatic Complexity · CodexAppServerConfigWriter.ReadResultAsync (cyclomatic 16) src/UniGetUI.Extensions.AgentSkills/CodexAppServerClient.cs
  • Cyclomatic Complexity · CursorPluginService.PerformAsync (cyclomatic 16) src/UniGetUI.Extensions.AgentSkills/CursorPluginService.cs
  • Cyclomatic Complexity · TrustedPath.WhyWritable (cyclomatic 16) src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/TrustedPath.cs
  • Cyclomatic Complexity · UpgradablePackagesLoader.ResolveSkippedMajorUpdateExclusivelyAsync (cyclomatic 16) src/UniGetUI.PackageEngine.PackageLoader/UpgradablePackagesLoader.cs
  • Cyclomatic Complexity · ArpEntries.ReadRegistry (cyclomatic 16) src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/ArpEntries.cs
  • Cyclomatic Complexity · PeReader.ReadResources (cyclomatic 16) src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/PeReader.cs
  • Cyclomatic Complexity · BaseNuGet.GetAvailableUpdatesFromSource (cyclomatic 16) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs
  • Cognitive Complexity · AddCommand.RunInner (cognitive 212) src/UniGetUI.AgentSkills.Cli/AddRun.cs
  • Cognitive Complexity · SearchMultiselect.Run (cognitive 157) src/UniGetUI.AgentSkills.Cli/SearchMultiselect.cs
  • Cognitive Complexity · UpdateCommand.UpdateGlobalSkills (cognitive 82) src/UniGetUI.AgentSkills.Cli/Update.cs
  • Cognitive Complexity · SyncCommand.Run (cognitive 81) src/UniGetUI.AgentSkills.Cli/Sync.cs
  • Cognitive Complexity · UpdateCommand.UpdateProjectSkills (cognitive 64) src/UniGetUI.AgentSkills.Cli/Update.cs
  • Cognitive Complexity · AddCommand.HandleWellKnownSkills (cognitive 58) src/UniGetUI.AgentSkills.Cli/AddWellKnown.cs
  • Cognitive Complexity · AvaloniaAutoUpdater.PrepareAndLaunchAsync (cognitive 55) src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs
  • Cognitive Complexity · ValidateCommand.StripInstallMetadata (cognitive 47) src/UniGetUI.AgentSkills.Cli/Validate.cs
  • Cognitive Complexity · Notion.PreparePackSource (cognitive 41) src/UniGetUI.AgentSkills.Cli/Notion.cs
  • Cognitive Complexity · Ui.WrapLine (cognitive 41) src/UniGetUI.AgentSkills.Cli/Ui.cs
  • Cognitive Complexity · ListCommand.Run (cognitive 39) src/UniGetUI.AgentSkills.Cli/List.cs
  • Cognitive Complexity · AgentSkillsViewModel.EmptyDescription.get (cognitive 35) src/UniGetUI.Avalonia/ViewModels/Pages/AgentSkillsViewModel.cs
  • Cognitive Complexity · SyncCommand.DiscoverNodeModuleSkills (cognitive 35) src/UniGetUI.AgentSkills.Cli/Sync.cs
  • Cognitive Complexity · ValidateCommand.CheckSkill (cognitive 35) src/UniGetUI.AgentSkills.Cli/Validate.cs
  • Cognitive Complexity · PreviewCommand.ParseOptions (cognitive 33) src/UniGetUI.AgentSkills.Cli/Preview.cs
  • Cognitive Complexity · RemoveCommand.Run (cognitive 32) src/UniGetUI.AgentSkills.Cli/Remove.cs
  • Cognitive Complexity · PkgPayload.FindAppResources (cognitive 32) src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgPayload.cs
  • Cognitive Complexity · PersistedEnvironment.ComputeChanges (cognitive 31) src/UniGetUI.Core.Tools/PersistedEnvironment.cs
  • Cognitive Complexity · IgnoredUpdatesDialog.ShowAsync (cognitive 31) src/UniGetUI.Tui/Views/Dialogs/IgnoredUpdatesDialog.cs
  • Cognitive Complexity · AgentSkillsViewModel.LoadSkillsAsync (cognitive 29) src/UniGetUI.Avalonia/ViewModels/Pages/AgentSkillsViewModel.cs
  • Cognitive Complexity · AgentSkillsViewModel.EmptyTitle.get (cognitive 28) src/UniGetUI.Avalonia/ViewModels/Pages/AgentSkillsViewModel.cs
  • Cognitive Complexity · Program.Run (cognitive 28) src/UniGetUI.AgentSkills.Cli/Main.cs
  • Cognitive Complexity · ValidateCommand.ValidatePath (cognitive 28) src/UniGetUI.AgentSkills.Cli/Validate.cs
  • Cognitive Complexity · UseCommand.ParseOptions (cognitive 26) src/UniGetUI.AgentSkills.Cli/Use.cs
  • Cognitive Complexity · AgentSkillsService.Search (cognitive 26) src/UniGetUI.Extensions.AgentSkills/AgentSkillsService.cs
  • Cognitive Complexity · Ui.IsWide (cognitive 25) src/UniGetUI.AgentSkills.Cli/Ui.cs
  • Cognitive Complexity · ArpEntries.ReadRegistry (cognitive 25) src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/ArpEntries.cs
  • Cognitive Complexity · PeReader.ReadResources (cognitive 25) src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/PeReader.cs
  • Cognitive Complexity · CatalogEditorPage.PinVersionAsync (cognitive 24) src/UniGetUI.Avalonia/Views/SoftwarePages/CatalogEditorPage.cs
  • Cognitive Complexity · AddCommand.Run (cognitive 24) src/UniGetUI.AgentSkills.Cli/AddRun.cs
  • Cognitive Complexity · AddCommand.PrintInstalledNote (cognitive 24) src/UniGetUI.AgentSkills.Cli/AddRun.cs
  • Cognitive Complexity · DetectAgent.DetermineAgent (cognitive 24) src/UniGetUI.AgentSkills.Cli/DetectAgent.cs
  • Cognitive Complexity · GhInstalled.CheckGhSkills (cognitive 24) src/UniGetUI.AgentSkills.Cli/GhInstalled.cs
  • Cognitive Complexity · NuGetV3Client.GetRegistrationVersions (cognitive 24) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs
  • Cognitive Complexity · GhInstalled.ScanGhSkills (cognitive 23) src/UniGetUI.AgentSkills.Cli/GhInstalled.cs
  • Cognitive Complexity · UseCommand.ResolveSkill (cognitive 23) src/UniGetUI.AgentSkills.Cli/Use.cs
  • Cognitive Complexity · InstalledMatcher.FindByName (cognitive 23) src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/InstalledMatcher.cs
  • Cognitive Complexity · AgentSkillsViewModel.RefreshLibraryItems (cognitive 22) src/UniGetUI.Avalonia/ViewModels/Pages/AgentSkillsViewModel.cs
  • Cognitive Complexity · SoftwareUpdatesPage.WhenPackagesLoaded (cognitive 22) src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs
  • Cognitive Complexity · Notion.FetchPacks (cognitive 22) src/UniGetUI.AgentSkills.Cli/Notion.cs
  • Cognitive Complexity · AgentSkillsService.PerformAsync (cognitive 22) src/UniGetUI.Extensions.AgentSkills/AgentSkillsService.cs
  • Cognitive Complexity · GitRepositoryService.ParseWorktreeList (cognitive 22) src/UniGetUI.Extensions.GitRepositories/GitRepositoryService.cs
  • Cognitive Complexity · PkgMetadata.ReadComponentApp (cognitive 22) src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgMetadata.cs
  • Cognitive Complexity · UpdateCommand.ProcessWellKnownUpdates (cognitive 21) src/UniGetUI.AgentSkills.Cli/Update.cs
  • Cognitive Complexity · CursorPluginService.GetCatalogAsync (cognitive 21) src/UniGetUI.Extensions.AgentSkills/CursorPluginService.cs

We compare every finding with the previous survey's. A finding that has only moved to another line in the same file counts as the same finding, so only new findings appear here. Advisory notes from the AI model are left out, because the model words them afresh in every survey.

Fixed since the last survey: 890 findings

These 890 critical or serious findings were in the previous survey, on 23 October 2026, and are gone from this one. The first 100 are listed here.

  • Cyclomatic Complexity · PackageManagerPage.BuildPage (cyclomatic 27) src/UniGetUI.Avalonia/Views/Pages/SettingsPages/PackageManagerPage.axaml.cs
  • Cyclomatic Complexity · WinGet.GetLocalSource (cyclomatic 17) src/UniGetUI.PackageEngine.Managers.WinGet/WinGet.cs
  • Cyclomatic Complexity · MainWindow.RunStartupTasksAsync (cyclomatic 16) src/UniGetUI.Tui/Views/MainWindow.cs
  • Cognitive Complexity · PackageManagerPage.BuildPage (cognitive 28) src/UniGetUI.Avalonia/Views/Pages/SettingsPages/PackageManagerPage.axaml.cs
  • Cognitive Complexity · BaseNuGet.GetAvailableUpdates_UnSafe (cognitive 24) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs
  • Cognitive Complexity · WinGetPkgOperationHelper.TryGetPortableInstallLocation (cognitive 21) src/UniGetUI.PackageEngine.Managers.WinGet/Helpers/WinGetPkgOperationHelper.cs
  • Cognitive Complexity · MainWindow.IsRectangleFullyVisible (cognitive 17) src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs
  • Cognitive Complexity · AvaloniaBootstrapper.GetMissingDependenciesAsync (cognitive 17) src/UniGetUI.Avalonia/Infrastructure/AvaloniaBootstrapper.cs
  • God Classes · ClassTooLong: NuGetV3Client src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs
  • God Classes · ClassTooLong: NativeWinGetHelper src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/NativeWinGetHelper.cs
  • Code Duplication · Edited copy of a member (23 corresponding lines) src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs
  • Code Duplication · Members sharing a duplicated core (6 members, 50+ identical tokens) src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs
  • Code Duplication · Members sharing a duplicated core (5 members, 50+ identical tokens) src/UniGetUI.Avalonia/Infrastructure/AvaloniaPackageOperationHelper.cs
  • Code Duplication · Members sharing a duplicated core (5 members, 50+ identical tokens) REDACTED
  • Code Duplication · Members sharing a duplicated core (5 members, 50+ identical tokens) src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs
  • Code Duplication · Duplicated block (27 lines × 2) src/UniGetUI.Avalonia/Views/Pages/HelpPage.axaml.cs
  • Code Duplication · Duplicated block (18–20 lines × 2) src/UniGetUI.PackageEngine.Operations/PackageOperations.cs
  • Code Duplication · Duplicated block (18–19 lines × 2) src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs
  • Code Duplication · Duplicated block (6 lines × 2) src/UniGetUI.PackageEngine.PackageLoader/AbstractPackageLoader.cs
  • Code Duplication · Duplicated block (15 lines × 2) src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs
  • Code Duplication · Duplicated block (15 lines × 2) src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs
  • Code Duplication · Duplicated block (13 lines × 2) src/UniGetUI.PackageEngine.Managers.Scoop/Scoop.cs
  • Code Duplication · Duplicated block (11 lines × 2) src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs
  • Code Duplication · Duplicated block (10–11 lines × 2) src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs
  • Code Duplication · Duplicated block (8 lines × 3) src/UniGetUI.Avalonia/Infrastructure/AvaloniaPackageOperationHelper.cs
  • Code Duplication · Duplicated block (6 lines × 3) src/UniGetUI.Avalonia/Views/SoftwarePages/DiscoverSoftwarePage.cs
  • Code Duplication · Duplicated block (7 lines × 5) src/UniGetUI.Avalonia/Infrastructure/AvaloniaPackageOperationHelper.cs
  • Code Duplication · Duplicated block (7 lines × 2) src/UniGetUI.Avalonia/Views/Pages/HelpPage.axaml.cs
  • Cohesion (LCOM4) · Low cohesion: MainWindow (LCOM4 9) src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs
  • Cohesion (LCOM4) · Low cohesion: AbstractPackagesPage (LCOM4 6) src/UniGetUI.Avalonia/Views/SoftwarePages/AbstractPackagesPage.axaml.cs
  • Churn × Complexity Hotspots · Hotspot: src/UniGetUI.Avalonia/ViewModels/Pages/LogPages/OperationHistoryPageViewModel.cs src/UniGetUI.Avalonia/ViewModels/Pages/LogPages/OperationHistoryPageViewModel.cs
  • Explicit Debt · EmptyCatchBlock src/UniGetUI.PackageEngine.Managers.Pip/Pip.cs
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: REDACTED REDACTED
  • Static Analysis (SAST) · High: watchdog-quoted-interpolation-into-process-arguments-csharp src/UniGetUI.Interface.IpcApi/IpcManagerMaintenanceApi.cs
  • Change Coupling · Change coupling: InvalidImportedPackage.cs ↔ Package.cs src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/InvalidImportedPackage.cs
  • Access Controls · No authorization
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
  • Access Controls · No authorization REDACTED
Rebuild cost: about €540,000 · Estimate
Cost to rebuild€170,000 to €900,000, for 2,912 to 9,495 hours of work, about 3.7 person-years for 2 to 8 engineers
Difficulty of the problemStandard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write.
Quality factor×0.7 at a score of 47. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it.
SizeLarge: 149,784 lines of product code
Comment linesThe estimate prices 141,812 lines. Comment lines count towards the size of 149,784 lines but aren't priced as work.
What it is notNot a quotation: nobody has offered to build it for that. Not a valuation: it says nothing about what the business is worth. Not a certified figure: no professional has signed it as one.

How the estimate is made: We price the hours a team would need to write this code again, at €60 to €95 an hour. Declarations and boilerplate are priced at a fast rate and logic at a slower one, and the logic is then multiplied by the difficulty of the problem and by the quality factor. The estimate can be about 30% off either way, and it moves most with the hourly rate and the difficulty.

Top priorities

The three actions that raise the score most for the work they take. The full ranked list is in the Roadmap.

1
Resolve the 5 REDACTED finding(s) in Secrets (history) — start with REDACTED (4), REDACTED.
Raises the score by about 4 points · Low effort · Secrets (history)
2
Encrypt sensitive data at rest (ASP.NET Core Data Protection / column encryption) and manage keys in a vault.
Skip if delegated to infra (Postgres TDE, KMS, etc.).
Raises the score by about 6 points · Medium effort · Data Protection
3
Stop accepting every TLS certificate: remove the always-true validation callback so the platform verifies the chain, hostname and expiry.
If one self-signed certificate must be trusted, pin it by public key or thumbprint on the single handler that needs it and reject all others — never process-wide.
Raises the score by about 6 points · Medium effort · Web-Security Posture

Diagnosis: what the measurements show together

Each conclusion below combines several dimensions into one point that no single dimension shows, and lists the measurements it rests on.

Where the investment is most exposed · Value at risk
This code would cost about €540,000 to build again, about 3.7 person-years of work. Its weakest lens is Security and Compliance, at 37 (Weak). Security and Compliance is about how well the product is protected, and how it handles personal data. Because the weakest lens counts most in the score, work on Security and Compliance also moves the score most.
Based on: the rebuild estimate · the Security and Compliance grade · how much each lens counts
What to do: Start with the Security and Compliance actions in Top priorities.
If you do one thing first · First action
Resolve the 5 REDACTED finding(s) in Secrets (history). Of all the actions in this report, it raises the score most for the work it takes: about 4 points for low effort, because it clears the 5 Secrets (history) findings. The next survey will show the change in the score.
Based on: the ranked actions in Top priorities, by score gain and effort

Architecture — module dependency graph

Project dependencies, layered top-to-bottom; arrows show direction. Any dashed red edge points upward or sideways, which only happens where the projects form a dependency cycle. A graph without cycles has none.

arch UniGetUI.Avalonia Avalonia UniGetUI.Core.Data Data UniGetUI.Avalonia->UniGetUI.Core.Data UniGetUI.Core.LanguageEngine LanguageEngine UniGetUI.Avalonia->UniGetUI.Core.LanguageEngine UniGetUI.Core.Logging Logging UniGetUI.Avalonia->UniGetUI.Core.Logging UniGetUI.Core.Settings Settings UniGetUI.Avalonia->UniGetUI.Core.Settings UniGetUI.Core.Tools Tools UniGetUI.Avalonia->UniGetUI.Core.Tools UniGetUI.Interface.Enums Enums UniGetUI.Avalonia->UniGetUI.Interface.Enums UniGetUI.Interface.IpcApi IpcApi UniGetUI.Avalonia->UniGetUI.Interface.IpcApi UniGetUI.PackageEngine.PEInterface PEInterface UniGetUI.Avalonia->UniGetUI.PackageEngine.PEInterface UniGetUI.Core.Classes Classes UniGetUI.Core.Classes->UniGetUI.Core.Logging UniGetUI.Core.Data->UniGetUI.Core.Logging UniGetUI.Core.IconEngine IconEngine UniGetUI.Core.IconEngine->UniGetUI.Core.Data UniGetUI.Core.IconEngine->UniGetUI.Core.Logging UniGetUI.Core.IconEngine->UniGetUI.Core.Settings UniGetUI.Core.IconEngine->UniGetUI.Core.Tools UniGetUI.Core.LanguageEngine->UniGetUI.Core.Classes UniGetUI.Core.LanguageEngine->UniGetUI.Core.Data UniGetUI.Core.LanguageEngine->UniGetUI.Core.Logging UniGetUI.Core.LanguageEngine->UniGetUI.Core.Settings UniGetUI.PackageEngine.Structs Structs UniGetUI.Core.LanguageEngine->UniGetUI.PackageEngine.Structs UniGetUI.Core.Settings->UniGetUI.Core.Data UniGetUI.Core.Settings->UniGetUI.Core.Logging UniGetUI.Core.Tools->UniGetUI.Core.Data UniGetUI.Core.Tools->UniGetUI.Core.LanguageEngine UniGetUI.Core.Tools->UniGetUI.Core.Logging UniGetUI.Core.Tools->UniGetUI.Core.Settings UniGetUI.Core.Tools->UniGetUI.PackageEngine.Structs UniGetUI.Interface.IpcApi->UniGetUI.Core.Classes UniGetUI.Interface.IpcApi->UniGetUI.Core.Data UniGetUI.Interface.IpcApi->UniGetUI.Core.IconEngine UniGetUI.Interface.IpcApi->UniGetUI.Core.LanguageEngine UniGetUI.Interface.IpcApi->UniGetUI.Core.Logging UniGetUI.Interface.IpcApi->UniGetUI.Core.Settings UniGetUI.Interface.IpcApi->UniGetUI.Core.Tools UniGetUI.PackageEngine.Classes Classes UniGetUI.Interface.IpcApi->UniGetUI.PackageEngine.Classes UniGetUI.Interface.IpcApi->UniGetUI.PackageEngine.PEInterface UniGetUI.Interface.IpcApi->UniGetUI.PackageEngine.Structs UniGetUI.PackageEngine.Classes->UniGetUI.Core.Classes UniGetUI.PackageEngine.Classes->UniGetUI.Core.Data UniGetUI.PackageEngine.Classes->UniGetUI.Core.IconEngine UniGetUI.PackageEngine.Classes->UniGetUI.Core.LanguageEngine UniGetUI.PackageEngine.Classes->UniGetUI.Core.Settings UniGetUI.PackageEngine.Classes->UniGetUI.Core.Tools UniGetUI.PackageEngine.Classes->UniGetUI.Interface.Enums UniGetUI.PackageEngine.Interfaces Interfaces UniGetUI.PackageEngine.Classes->UniGetUI.PackageEngine.Interfaces UniGetUI.PackageEngine.Classes->UniGetUI.PackageEngine.Structs UniGetUI.PackageEngine.Interfaces->UniGetUI.Core.Classes UniGetUI.PackageEngine.Interfaces->UniGetUI.Core.Data UniGetUI.PackageEngine.Interfaces->UniGetUI.Core.IconEngine UniGetUI.PackageEngine.Interfaces->UniGetUI.Core.LanguageEngine UniGetUI.PackageEngine.Interfaces->UniGetUI.Core.Logging UniGetUI.PackageEngine.Interfaces->UniGetUI.Core.Settings UniGetUI.PackageEngine.Interfaces->UniGetUI.Core.Tools UniGetUI.PackageEngine.Interfaces->UniGetUI.Interface.Enums UniGetUI.PackageEngine.Interfaces->UniGetUI.PackageEngine.Structs UniGetUI.PackageEngine.Managers.Cargo Cargo UniGetUI.PackageEngine.Managers.Cargo->UniGetUI.Core.Classes UniGetUI.PackageEngine.Managers.Cargo->UniGetUI.Core.Data UniGetUI.PackageEngine.Managers.Cargo->UniGetUI.Core.IconEngine UniGetUI.PackageEngine.Managers.Cargo->UniGetUI.Core.LanguageEngine UniGetUI.PackageEngine.Managers.Cargo->UniGetUI.Core.Logging UniGetUI.PackageEngine.Managers.Cargo->UniGetUI.Core.Settings UniGetUI.PackageEngine.Managers.Cargo->UniGetUI.Core.Tools UniGetUI.PackageEngine.Managers.Cargo->UniGetUI.Interface.Enums UniGetUI.PackageEngine.Managers.Cargo->UniGetUI.PackageEngine.Classes UniGetUI.PackageEngine.Managers.Cargo->UniGetUI.PackageEngine.Interfaces UniGetUI.PackageEngine.Managers.Cargo->UniGetUI.PackageEngine.Structs UniGetUI.PackageEngine.Managers.Chocolatey Chocolatey UniGetUI.PackageEngine.Managers.Chocolatey->UniGetUI.Core.Classes UniGetUI.PackageEngine.Managers.Chocolatey->UniGetUI.Core.Data UniGetUI.PackageEngine.Managers.Chocolatey->UniGetUI.Core.IconEngine UniGetUI.PackageEngine.Managers.Chocolatey->UniGetUI.Core.LanguageEngine UniGetUI.PackageEngine.Managers.Chocolatey->UniGetUI.Core.Logging UniGetUI.PackageEngine.Managers.Chocolatey->UniGetUI.Core.Settings UniGetUI.PackageEngine.Managers.Chocolatey->UniGetUI.Core.Tools UniGetUI.PackageEngine.Managers.Chocolatey->UniGetUI.Interface.Enums UniGetUI.PackageEngine.Managers.Chocolatey->UniGetUI.PackageEngine.Classes UniGetUI.PackageEngine.Managers.Chocolatey->UniGetUI.PackageEngine.Interfaces UniGetUI.PackageEngine.Managers.Chocolatey->UniGetUI.PackageEngine.Structs UniGetUI.PackageEngine.Managers.Dotnet Dotnet UniGetUI.PackageEngine.Managers.Dotnet->UniGetUI.Core.Classes UniGetUI.PackageEngine.Managers.Dotnet->UniGetUI.Core.Data UniGetUI.PackageEngine.Managers.Dotnet->UniGetUI.Core.IconEngine UniGetUI.PackageEngine.Managers.Dotnet->UniGetUI.Core.LanguageEngine UniGetUI.PackageEngine.Managers.Dotnet->UniGetUI.Core.Logging UniGetUI.PackageEngine.Managers.Dotnet->UniGetUI.Core.Settings UniGetUI.PackageEngine.Managers.Dotnet->UniGetUI.Core.Tools UniGetUI.PackageEngine.Managers.Dotnet->UniGetUI.Interface.Enums UniGetUI.PackageEngine.Managers.Dotnet->UniGetUI.PackageEngine.Classes UniGetUI.PackageEngine.Managers.Dotnet->UniGetUI.PackageEngine.Interfaces UniGetUI.PackageEngine.Managers.Dotnet->UniGetUI.PackageEngine.Structs UniGetUI.PackageEngine.Managers.MacPkg MacPkg UniGetUI.PackageEngine.Managers.MacPkg->UniGetUI.Core.Classes UniGetUI.PackageEngine.Managers.MacPkg->UniGetUI.Core.Data UniGetUI.PackageEngine.Managers.MacPkg->UniGetUI.Core.IconEngine UniGetUI.PackageEngine.Managers.MacPkg->UniGetUI.Core.LanguageEngine UniGetUI.PackageEngine.Managers.MacPkg->UniGetUI.Core.Logging UniGetUI.PackageEngine.Managers.MacPkg->UniGetUI.Core.Settings UniGetUI.PackageEngine.Managers.MacPkg->UniGetUI.Core.Tools UniGetUI.PackageEngine.Managers.MacPkg->UniGetUI.Interface.Enums UniGetUI.PackageEngine.Managers.MacPkg->UniGetUI.PackageEngine.Classes UniGetUI.PackageEngine.Managers.MacPkg->UniGetUI.PackageEngine.Interfaces UniGetUI.PackageEngine.Managers.MacPkg->UniGetUI.PackageEngine.Structs UniGetUI.PackageEngine.Managers.PowerShell PowerShell UniGetUI.PackageEngine.Managers.PowerShell->UniGetUI.Core.Classes UniGetUI.PackageEngine.Managers.PowerShell->UniGetUI.Core.Data UniGetUI.PackageEngine.Managers.PowerShell->UniGetUI.Core.IconEngine UniGetUI.PackageEngine.Managers.PowerShell->UniGetUI.Core.LanguageEngine UniGetUI.PackageEngine.Managers.PowerShell->UniGetUI.Core.Logging UniGetUI.PackageEngine.Managers.PowerShell->UniGetUI.Core.Settings UniGetUI.PackageEngine.Managers.PowerShell->UniGetUI.Core.Tools UniGetUI.PackageEngine.Managers.PowerShell->UniGetUI.Interface.Enums UniGetUI.PackageEngine.Managers.PowerShell->UniGetUI.PackageEngine.Classes UniGetUI.PackageEngine.Managers.PowerShell->UniGetUI.PackageEngine.Interfaces UniGetUI.PackageEngine.Managers.PowerShell->UniGetUI.PackageEngine.Structs UniGetUI.PackageEngine.Managers.WinGet WinGet UniGetUI.PackageEngine.Managers.WinGet->UniGetUI.Core.Classes UniGetUI.PackageEngine.Managers.WinGet->UniGetUI.Core.Data UniGetUI.PackageEngine.Managers.WinGet->UniGetUI.Core.IconEngine UniGetUI.PackageEngine.Managers.WinGet->UniGetUI.Core.LanguageEngine UniGetUI.PackageEngine.Managers.WinGet->UniGetUI.Core.Logging UniGetUI.PackageEngine.Managers.WinGet->UniGetUI.Core.Settings UniGetUI.PackageEngine.Managers.WinGet->UniGetUI.Core.Tools UniGetUI.PackageEngine.Managers.WinGet->UniGetUI.Interface.Enums UniGetUI.PackageEngine.Managers.WinGet->UniGetUI.PackageEngine.Classes UniGetUI.PackageEngine.Managers.WinGet->UniGetUI.PackageEngine.Interfaces UniGetUI.PackageEngine.Managers.WinGet->UniGetUI.PackageEngine.Structs UniGetUI.PackageEngine.PEInterface->UniGetUI.Core.Classes UniGetUI.PackageEngine.PEInterface->UniGetUI.Core.Data UniGetUI.PackageEngine.PEInterface->UniGetUI.Core.LanguageEngine UniGetUI.PackageEngine.PEInterface->UniGetUI.Core.Logging UniGetUI.PackageEngine.PEInterface->UniGetUI.Core.Settings UniGetUI.PackageEngine.PEInterface->UniGetUI.Core.Tools UniGetUI.PackageEngine.PEInterface->UniGetUI.PackageEngine.Classes UniGetUI.PackageEngine.PEInterface->UniGetUI.PackageEngine.Managers.Cargo UniGetUI.PackageEngine.PEInterface->UniGetUI.PackageEngine.Managers.Chocolatey UniGetUI.PackageEngine.PEInterface->UniGetUI.PackageEngine.Managers.Dotnet UniGetUI.PackageEngine.PEInterface->UniGetUI.PackageEngine.Managers.MacPkg UniGetUI.PackageEngine.PEInterface->UniGetUI.PackageEngine.Managers.PowerShell UniGetUI.PackageEngine.PEInterface->UniGetUI.PackageEngine.Managers.WinGet UniGetUI.PackageEngine.PEInterface->UniGetUI.PackageEngine.Structs __more__ +32 more projects

Architecture: which parts of the code depend on which

The code is divided into modules, groups of code that each handle one part of the product, and a module depends on another when it uses code from it. The table lists the modules both down the side and across the top, in an order where each module should only use modules listed above it. A number in a cell means the module on that row uses the module in that column, and it counts the pairs of building blocks (types) that connect them. The one thing to look for is a mark above the diagonal line. It means two or more modules use each other in a loop (a dependency cycle), so none of them can be changed, tested or released on its own.

115 modules, with 460 dependencies between them. 5 loops run through 36 of the modules, marked above the diagonal.

The table shows the 40 modules with the most connections; 75 more are left out to keep it readable.

Which modules use which. The module on each row uses the module in each column, and the number counts the pairs of types that connect them. A cell above the diagonal is part of a loop.
uses →1 Core.IconEngine2 Core.Tools3 Interface.Enums4 PackageEngine.Enums5 PackageEngine.Serializable6 PackageEngine.Interfaces.ManagerProviders7 PackageEngine.ManagerClasses.Classes8 PackageEngine.PackageClasses9 PackageOperations10 PackageEngine.ManagerClasses.Manager11 PackageEngine.Interfaces12 Avalonia.ViewModels.Pages.LogPages13 Avalonia.ViewModels.Pages.SettingsPages14 Interface15 PackageEngine.Classes.Manager16 PackageEngine.Classes.Manager.BaseProviders17 PackageEngine.Classes.Manager.Providers18 PackageEngine.Operations19 Avalonia.Views.Controls20 PackageEngine.Managers.BunManager21 PackageEngine.Managers.CargoManager22 PackageEngine.Managers.FlatpakManager23 PackageEngine.Managers.HomebrewManager24 PackageEngine.Managers.MacPkgManager25 PackageEngine.Managers.PipManager26 PackageEngine.Managers.PowerShellManager27 PackageEngine.Managers.VcpkgManager28 PackageEngine.Managers.WinInstallerManager29 PackageEngine.Managers.WingetManager30 Tui.Infrastructure31 Avalonia.Views.DialogPages32 PackageEngine.Managers.DotNetManager33 Tui.Views.Pages34 Avalonia.ViewModels.Pages35 PackageEngine36 Avalonia.Views.Pages37 Avalonia.Views38 Avalonia.Views.Pages.SettingsPages39 Avalonia.ViewModels40 Avalonia.Infrastructure
1 Core.IconEngine
2 Core.Tools
3 Interface.Enums
4 PackageEngine.Enums
5 PackageEngine.Serializable
6 PackageEngine.Interfaces.ManagerProviders1626
7 PackageEngine.ManagerClasses.Classes415
8 PackageEngine.PackageClasses24152411
9 PackageOperations11
10 PackageEngine.ManagerClasses.Manager113117
11 PackageEngine.Interfaces122312
12 Avalonia.ViewModels.Pages.LogPages113
13 Avalonia.ViewModels.Pages.SettingsPages15232
14 Interface121710
15 PackageEngine.Classes.Manager113261215
16 PackageEngine.Classes.Manager.BaseProviders12125
17 PackageEngine.Classes.Manager.Providers215
18 PackageEngine.Operations2741212
19 Avalonia.Views.Controls14
20 PackageEngine.Managers.BunManager1211162
21 PackageEngine.Managers.CargoManager17211152
22 PackageEngine.Managers.FlatpakManager13111721
23 PackageEngine.Managers.HomebrewManager131118121
24 PackageEngine.Managers.MacPkgManager13111152
25 PackageEngine.Managers.PipManager113111162
26 PackageEngine.Managers.PowerShellManager1131221621
27 PackageEngine.Managers.VcpkgManager131114121
28 PackageEngine.Managers.WinInstallerManager13111162
29 PackageEngine.Managers.WingetManager115255125221
30 Tui.Infrastructure141474
31 Avalonia.Views.DialogPages421311
32 PackageEngine.Managers.DotNetManager2116111
33 Tui.Views.Pages13619
34 Avalonia.ViewModels.Pages1315212
35 PackageEngine311111111
36 Avalonia.Views.Pages111311141355
37 Avalonia.Views223371261
38 Avalonia.Views.Pages.SettingsPages51431711
39 Avalonia.ViewModels4138211212211
40 Avalonia.Infrastructure2147833
Uses a module listed above itPart of a loopThe module itself
1 Core.IconEngine2 Core.Tools3 Interface.Enums4 PackageEngine.Enums5 PackageEngine.Serializable6 PackageEngine.Interfaces.ManagerProviders7 PackageEngine.ManagerClasses.Classes8 PackageEngine.PackageClasses9 PackageOperations10 PackageEngine.ManagerClasses.Manager11 PackageEngine.Interfaces12 Avalonia.ViewModels.Pages.LogPages13 Avalonia.ViewModels.Pages.SettingsPages14 Interface15 PackageEngine.Classes.Manager16 PackageEngine.Classes.Manager.BaseProviders17 PackageEngine.Classes.Manager.Providers18 PackageEngine.Operations19 Avalonia.Views.Controls20 PackageEngine.Managers.BunManager21 PackageEngine.Managers.CargoManager22 PackageEngine.Managers.FlatpakManager23 PackageEngine.Managers.HomebrewManager24 PackageEngine.Managers.MacPkgManager25 PackageEngine.Managers.PipManager26 PackageEngine.Managers.PowerShellManager27 PackageEngine.Managers.VcpkgManager28 PackageEngine.Managers.WinInstallerManager29 PackageEngine.Managers.WingetManager30 Tui.Infrastructure31 Avalonia.Views.DialogPages32 PackageEngine.Managers.DotNetManager33 Tui.Views.Pages34 Avalonia.ViewModels.Pages35 PackageEngine36 Avalonia.Views.Pages37 Avalonia.Views38 Avalonia.Views.Pages.SettingsPages39 Avalonia.ViewModels40 Avalonia.InfrastructureCore.IconEngine1Core.Tools2Interface.Enums3PackageEngine.Enums4PackageEngine.Serializable5PackageEngine.Interfaces.ManagerProviders6PackageEngine.ManagerClasses.Classes7PackageEngine.PackageClasses8PackageOperations9PackageEngine.ManagerClasses.Manager10PackageEngine.Interfaces11Avalonia.ViewModels.Pages.LogPages12Avalonia.ViewModels.Pages.SettingsPages13Interface14PackageEngine.Classes.Manager15PackageEngine.Classes.Manager.BaseProviders16PackageEngine.Classes.Manager.Providers17PackageEngine.Operations18Avalonia.Views.Controls19PackageEngine.Managers.BunManager20PackageEngine.Managers.CargoManager21PackageEngine.Managers.FlatpakManager22PackageEngine.Managers.HomebrewManager23PackageEngine.Managers.MacPkgManager24PackageEngine.Managers.PipManager25PackageEngine.Managers.PowerShellManager26PackageEngine.Managers.VcpkgManager27PackageEngine.Managers.WinInstallerManager28PackageEngine.Managers.WingetManager29Tui.Infrastructure30Avalonia.Views.DialogPages31PackageEngine.Managers.DotNetManager32Tui.Views.Pages33Avalonia.ViewModels.Pages34PackageEngine35Avalonia.Views.Pages36Avalonia.Views37Avalonia.Views.Pages.SettingsPages38Avalonia.ViewModels39Avalonia.Infrastructure40162641524152411111131171223121131523212171011326121512125215274121214121116217211152131117211311181211311115211311116211312216211311141211311116211525512522114147442131121161111361913152123111111111113111413552233712615143171141382112122112147833+75 more modules (most-connected shown)

At a glance — Code Health · 52% · Adequate · gated by X4 ·

At a glance — Architecture · 71% · Adequate · gated by AX2 ·

At a glance — Maturity · 66% · Adequate · gated by M2 ·

At a glance — Readiness · 53% · Adequate · gated by P7 ·

At a glance — Security · 37% · Weak · gated by D29, D36, C1, S1 ·

At a glance — Performance · 60% · Adequate ·

Security & Compliance — OWASP Top-10 mapping

Findings mapped to OWASP categories; the specific CVEs/secrets are in the Security dimension cards below and findings.md (redacted only on the public version of this report).

OWASP categoryFindingsSeverity
A05:2025 — Injection126High / Critical
A03:2025 — Software Supply Chain Failures9Medium
A07:2025 — Authentication Failures6High / Critical

Roadmap

Top priorities: Encrypt sensitive data at rest (ASP.NET Core Data Protection / column encryption) and manage keys in a vault. Skip if delegated to infra (Postgres TDE, KMS, etc.); Stop accepting every TLS certificate: remove the always-true validation callback so the platform verifies the chain, hostname and expiry. If one self-signed certificate must be trusted, pin it by public key or thumbprint on the single handler that needs it and reject all others — never process-wide; Resolve the 5 REDACTED finding(s) in Secrets (history) — start with REDACTED (4), REDACTED.

Ranked by impact ÷ effort. "Helps" is the estimated gain on the 0–100 health score.

Do thisHelpsEffortDimension
Resolve the 5 REDACTED finding(s) in Secrets (history) — start with REDACTED (4), REDACTED.+3.9 ptsLowSecrets (history)
Encrypt sensitive data at rest (ASP.NET Core Data Protection / column encryption) and manage keys in a vault. Skip if delegated to infra (Postgres TDE, KMS, etc.).+6.5 ptsMediumData Protection
Stop accepting every TLS certificate: remove the always-true validation callback so the platform verifies the chain, hostname and expiry. If one self-signed certificate must be trusted, pin it by public key or thumbprint on the single handler that needs it and reject all others — never process-wide.+6.5 ptsMediumWeb-Security Posture
Resolve the 3 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED, REDACTED, REDACTED.+1.9 ptsLowStatic Analysis (SAST)
Resolve the 3 REDACTED finding(s) in Supply-chain Provenance & Signing — start with REDACTED, REDACTED, REDACTED.+2.3 ptsLowSupply-chain Provenance & Signing
Resolve the 2 FileScopedPragmaDisable finding(s) in Explicit Debt — start with SortableObservableCollectionTests.cs, LoggerTests.cs.+2.0 ptsLowExplicit Debt
Resolve the 3 NoWarnInCsproj finding(s) in Explicit Debt — start with UniGetUI.Avalonia.csproj (2), Directory.Build.props.+2.0 ptsLowExplicit Debt
Resolve the 64 EmptyCatchBlock finding(s) in Explicit Debt — start with AutoUpdater.Helpers.cs (3), CrashHandler.cs (3), AvaloniaAutoUpdater.cs (3).+2.0 ptsMediumExplicit Debt

File quality

Per-file score 0–10 — a quality signature. Of 323 files carrying findings, judged against the Production bar: 3% slop · 64% mixed · 33% near-clean.

FileScoreBandWorst signal
REDACTED0.0SlopStatic Analysis (SAST): High: REDACTED
src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs1.0SlopExplicit Debt: EmptyCatchBlock
REDACTED2.3SlopStatic Analysis (SAST): High: REDACTED
REDACTED2.3SlopSecrets (history): REDACTED: REDACTED
REDACTED2.3SlopStatic Analysis (SAST): High: REDACTED
REDACTED2.4SlopStatic Analysis (SAST): High: REDACTED
src/Shared/AutoUpdater.Helpers.cs2.9SlopExplicit Debt: EmptyCatchBlock
REDACTED3.0SlopStatic Analysis (SAST): High: REDACTED
src/UniGetUI.AgentSkills.Cli/Ui.cs3.4SlopExplicit Debt: EmptyCatchBlock
src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/NativeWinGetHelper.cs3.5SlopExplicit Debt: EmptyCatchBlock
src/UniGetUI.Avalonia/CrashHandler.cs3.6SlopExplicit Debt: EmptyCatchBlock
REDACTED4.0MixedStatic Analysis (SAST): Medium: REDACTED
src/UniGetUI.PackageEngine.Operations/AbstractProcessOperation.cs4.2MixedExplicit Debt: EmptyCatchBlock
src/UniGetUI.PackageEngine.PackageEngine/PEInterface.cs4.2MixedExplicit Debt: EmptyCatchBlock
src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationViewModel.cs4.2MixedExplicit Debt: EmptyCatchBlock
src/UniGetUI.Avalonia/Views/Controls/SvgIcon.cs4.2MixedExplicit Debt: EmptyCatchBlock
src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Helpers/ArpRegistryHelper.cs4.2MixedExplicit Debt: EmptyCatchBlock
src/UniGetUI.Tui/Views/Pages/OperationsPage.cs4.3MixedExplicit Debt: EmptyCatchBlock
REDACTED4.4MixedStatic Analysis (SAST): High: REDACTED
REDACTED4.4MixedStatic Analysis (SAST): High: REDACTED

How the grades work

Every finding carries one of four grades. Three say how serious it is. The fourth says this survey could not settle it — and it is a grade, not a gap.

Critical — 165

A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.

Serious — 1222

Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.

Minor — 129

Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.

Could not be resolved — 6

Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.

Methodology & how to trust this report

This survey is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. All 72 evaluated dimensions are computed by tools and static analysis; no language model sets or judges any of them. Overall confidence is 0.9, the weighted average across measured dimensions.

Every figure here is one of two kinds, and we label which: ✓ Measured — a deterministic fact (LoC, complexity, coverage); ~ Modeled — an estimate from a stated model (cost, effort, value-at-risk), always a range with its assumptions, never a precise fact. We never present a modelled estimate as if it were measured. Perfect or absent scores carry their provenance too (ADR-0011): ✓ Tool-verified means the property itself was measured across the surface; ○ Nothing flagged means the probes came back clean — a claim bounded by what a repository can show; ⊘ Not evidenced means a working control (a tested restore, an automated rollback) showed no positive evidence — absence of evidence is not evidence of a control, so it's excluded from the score rather than awarded a spurious 10.

What we checked — 72 dimensions across the health lenses
D1D2D3D4D5D6D10D13D14D15D16D17D18D19D20D21D24D26D27D28D29D34D35D36D43D44AX1AX10AX2AX3AX5AX6AX8C1C2C4GD1IC1M1M2M3M4P1P10P2P3P4P5P6P7PF3S1X1X12X13X16X18X19X2X20X21X22X23X24X25X27X28X29X3X30X4X5

Each chip is a dimension scored from real signals across architecture, testing, dependencies, security & compliance, documentation, git-history and code quality — in one coherent pass. A surface report typically covers a handful.

How to trust any code-health report — three questions
  1. Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 1491 of 1516 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line. (Every path in this report is repo-relative by construction: paths are normalized at the producer and the report is rejected if any rooted path leaks through.)
  2. Is there a tool behind the number? Every score below names the method that produced it: Roslyn, git or a scanner, not a narrative.
  3. Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.

This report answers yes to all three. That's the bar to hold any assessment to.

Tools & methods

The actual versions used this run (captured at analysis time) — re-run on the same commit for the identical score.

MethodBacksVersionEvaluator
Roslyn static analysisComplexity, cohesion, coupling, dead code, API surface, layering5.3.0✓ deterministic
Native secret scannerHardcoded secrets / credentials1.0.0✓ deterministic
Canine Code Analyzer duplication detector (in-process)Code duplication1.0.0✓ deterministic
Coverage (coverlet / dotnet-coverage)Line & branch coverage10.0.400✓ deterministic
NuGet / dotnetOutdated, vulnerable & deprecated dependencies10.0.400✓ deterministic
git / LibGit2SharpChurn hotspots, knowledge concentration, history2.43.0 · 0.31.0✓ deterministic
gitleaks · semgrep · trivySecrets in history, SAST, CVEs, IaC & container, PII / GDPR1.86.0 · 0.69.3✓ deterministic

Every finding is locatable in findings.md. Run 01a1cd39-5b75-7de2-a8b1-4a0163a5ce0d.

The exact command behind every deep-scan dimension — tool, version, invocation and retained raw output — is in Appendix B — Reproduction & audit trail.

Run transparency — what happened this run

What ran differently this time — a tool absent, degraded, or that fell back to an estimate. Named openly, not folded silently into the scores. A degraded run also records its exact cause in diagnostics.md.

  • D8 Code Coverage — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Coverage NOT MEASURED: the analyzer environment could not build/run the test suite (a target framework / SDK band or targeting pack the analyzer image doesn't carry). This is OUR limitation, not a defect in the repo — coverage is excluded from the score rather than counted as a near-zero. We track the analyzer-image gap so it can be closed; in the meantime, your test projects already reference a coverage collector, but no CI step we found runs the tests with it, so there is no report to hand us — run them with `--collect:"XPlat Code Coverage"` and commit (or publish into the working tree) the coverage.cobertura.xml it writes, and real coverage will be read. You can widen what we reach: optional: your test projects already reference a coverage collector, but no CI step we found runs the tests with it, so there is no report to hand us — run them with `--collect:"XPlat Code Coverage"` and commit (or publish into the working tree) the coverage.cobertura.xml it writes, and the real number is read on the next scan.
  • D11 Test Reliability — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Test reliability not included — no test tier completed within its budget.
  • D12 Dependency Hygiene — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. `dotnet list package` did not return usable output (restore or query failed); no outdated/vulnerable/deprecated data to assess. The tool said: `dotnet list package` exited 1 with no output.
  • D17 Explicit Debt — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. The C# workspace loaded this repository's projects but reported a load failure, and the dead-code reference search is unreliable over a graph that did not load cleanly, so it was skipped. The other debt markers on this row were read; dead symbols were not, and their absence from the score is not a finding that the code has none. First load diagnostic: Failure: Msbuild failed when processing the file 'src/UniGetUI.Core.Data/UniGetUI.Core.Data.csproj' with message: PackageReference System.Text.Encoding.CodePages will not be pruned. This package is automatically available and does not need to be referenced explicitly. Remove the PackageReference item.
  • D18 Solution Shape — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. `dotnet build` reported 1 error(s), and the diagnostics it printed were: MSB3073: The command ""/tmp/nuget-packages/microsoft.windows.cswinrt/2.2.0/cswinrt.exe" @"src/WindowsPackageManager.Interop/obj/arm64/Debug/net10.0-windows10.0.26100.0/Generated Files/CsWinRT/cswinrt.rsp"" exited with code 126.. None of them is a .NET compiler diagnostic, which is the only signal this check reads as "the code does not compile", so the failure is recorded as a build-environment gap rather than a code defect. The usual causes are a project that targets a platform this run cannot build (a Windows-only target framework on a Linux worker) or a build step that shells out to a tool the image does not carry. Solution Shape is scored on structure and is NOT capped. Semantic analysis is independent of this build and covers every project that loaded — but a project whose restore did not complete has no resolved references, so treat its results as absent rather than clean. ★ The reach of that test, stated so this classification can be checked rather than taken on trust: it reads the C# (CS), Visual Basic (BC) and F# (FS) compiler series, and treats SDK, NuGet-restore and MSBuild codes (NETSDK, NU, MSB) as evidence that the build did not run rather than that the code is broken — read the diagnostics named above and judge for yourself. You can widen what we reach: if this build is meant to run off its own platform, without host tooling we do not carry, the diagnostics named above are what stopped it. If it is deliberately platform-bound — a Windows-only desktop product, say — there is nothing to do here: the note records our reach, not a defect in your build.
  • D18 Solution Shape — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. A scan loads every live solution in the repository into one workspace. Every score, lens, and finding here reflects the projects of `src/UniGetUI.Windows.slnx`; 1 further solution(s) found in this tree (`InstallerExtras/MsiCreator/MsiInstallerWrapper.sln`) could not be added to it — their project list could not be read, or none of their projects opened — so their code is not represented in the headline. (This is a count of the solutions discovery found and could not show to be covered by the analyzed ones — not a claim about how many solution files the repository contains.) If one of them is an archived or vendored tree, declaring it — `.gitattributes` (`path/** linguist-vendored`) or `.editorconfig` (`[path/**] generated_code = true`) — excludes it from discovery the same way generated code is. You can widen what we reach: if one of these solutions is live code, check that it opens on its own (`dotnet build <solution>`); if it is archived or vendored, declare it so.
  • D19 Documentation Quality — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. This kind did not reach the 95 % precision gate in three adjudicated runs (docs/plans/deterministic-engine/adjudication/D19-sample3-v3.md), so by the pre-registered fallback it publishes no row until a re-measurement shows it does. The candidates are counted here, not reported as findings, and the score does not include them.
  • D21 Naming Consistency — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. D21's deterministic naming rules are gated on C# first (docs/plans/deterministic-engine.md, P5): each other language is switched on only after its own concept suite and A/B gate pass. Until then its declarations carry no naming verdict this run — this says nothing about whether its names are consistent.
  • D21 Naming Consistency — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. PREREGISTRATION version 20's fallback (adjudication D21-sample3-v3): this rule kind was adjudicated below the 95 % precision gate, so its candidates are counted here and not published, and the score covers only the acronym-spelling and awaitable-suffix rules. The kind returns as rows only after it shows a measured precision; this says nothing about whether these names are consistent.
  • D21 Naming Consistency — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. PREREGISTRATION version 20's fallback (adjudication D21-sample3-v3): this rule kind was adjudicated below the 95 % precision gate, so its candidates are counted here and not published, and the score covers only the acronym-spelling and awaitable-suffix rules. The kind returns as rows only after it shows a measured precision; this says nothing about whether these names are consistent.
  • D21 Naming Consistency — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. PREREGISTRATION version 20's fallback (adjudication D21-sample3-v3): this rule kind was adjudicated below the 95 % precision gate, so its candidates are counted here and not published, and the score covers only the acronym-spelling and awaitable-suffix rules. The kind returns as rows only after it shows a measured precision; this says nothing about whether these names are consistent.
  • D21 Naming Consistency — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. PREREGISTRATION version 20's fallback (adjudication D21-sample3-v3): this rule kind was adjudicated below the 95 % precision gate, so its candidates are counted here and not published, and the score covers only the acronym-spelling and awaitable-suffix rules. The kind returns as rows only after it shows a measured precision; this says nothing about whether these names are consistent.
  • D22 Internal API Consistency — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. The loaded project set declares no packable project and no `.Contracts` project, so there is no intentionally-exposed surface for API consistency to be judged over.
  • D23 Boundary Type-Coupling — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Large codebase (149,682 production LoC in the .NET projects) with no declared bounded contexts — cross-boundary type coupling is unassessed Bounded contexts cannot be inferred from a codebase that is not physically organised by them (D-321), so with none declared there are no boundaries for the coupling pass to measure across. You can widen what we reach: name this codebase's bounded contexts (≥2 module groups, e.g. per subsystem) so cross-boundary type coupling can be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
  • D32 Data Compliance (PII/GDPR) — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. `scripts/CargoSmoke/Program.cs`, `src/Shared/SharedPreUiCommandDispatcher.cs`, `src/Shared/StartupBundleArguments.cs`, `src/UniGetUI.AgentSkills.Cli/AddRun.cs`, `src/UniGetUI.AgentSkills.Cli/GitHubRelease.cs`, … (+148 more) produced a parse error, so every rule in this engine's `gdpr.yml` was absent there. That absence is NOT a clean result: these rules detect personal data crossing a boundary into a log sink, a URL or browser storage, and a file that was never parsed cannot report any of the three. The rest of the tree analysed normally and its rows above stand; only these files are unaccounted for. You can widen what we reach: fix the syntax error (or exclude the file deliberately) and re-scan to cover it.
  • AX2 Stateful singletons — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. 3 further occurrence(s) are not listed individually; the score already reflects all 43.
  • AXB1 Runtime evidence locked — no reproducible boot — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Subject: a native UI project (src/UniGetUI.Avalonia/App.axaml). The Runtime Evidence tier boots an app only via docker-compose, an Aspire AppHost, a Dockerfile, an npm dev script, a web service's own toolchain entry point (cargo, go, dotnet, Python, Spring Boot), or an Android app's own Gradle wrapper (run on an emulator); an Apple or Flutter app needs a host it lacks. None applied, so no live runtime a11y/egress/header evidence was collected. You can widen what we reach: add a docker-compose.yml (or an Aspire AppHost) that brings the app up with its dependencies. We then boot it in an isolated sandbox and gathers real runtime evidence — you change nothing in your pipeline (no CI step, no SDK).
  • GD1 Unfinished & placeholder code — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. 14 further occurrence(s) are not listed individually; the score already reflects all 54.
  • IC1 Incompleteness & stubs — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. 35 further occurrence(s) are not listed individually; the score already reflects all 75.
  • M4 Documentation accuracy — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. M4 checks only the claim kinds adjudicated at or above 95 % precision: links and versions (PREREGISTRATION version 9), and artefact counts an order of magnitude off. Paths, command arguments, installs, environment variables, settings, projects, packages, routes, cd targets, infrastructure products and removed modules are read but not checked, and none of them is reported or counted.
  • PF3 Async & latency hygiene — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. 24 further occurrence(s) are not listed individually; the score already reflects all 64.
  • X1 Async correctness — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. 87 further occurrence(s) are not listed individually; the score already reflects all 127.
  • X2 Cancellation propagation — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. 543 further occurrence(s) are not listed individually; the score already reflects all 583.
  • X3 Exception handling — measured, with a gap in what it reached — We measured this, but not all of it. What we did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. 60 further occurrence(s) are not listed individually; the score already reflects all 100.
  • X7 Silent fallback defaults — not measured this run — We could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 51 further occurrence(s) are not listed individually; the score already reflects all 91.

Repo exclusion declarations: 2 pattern(s) declared (.gitattributes linguist-generated/vendored, .editorconfig generated_code) excluded 0 source file(s) from code-quality scoring. Declarations are the repo's own visible statement that a tree is machine-written or vendored — auditable in any diff, honored by GitHub the same way.

Limitations & what we did not check

We assess the repository exactly as committed, and only the repository. By design we do not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.

Per-dimension blind spots

For each dimension that was measured, what a static, repo-only scan structurally cannot see — the honest edge of the measurement, not a failure of it.

  • D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
  • D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
  • D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
  • D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
  • D5 Coupling: Coupling is measured between projects/assemblies — runtime coupling through DI, reflection, messaging or shared databases is invisible to a static reference graph.
  • D6 Cohesion (LCOM4): LCOM4 cohesion is syntactic — it infers connectivity from which methods touch which fields/methods by name, not from real runtime behaviour or intent.
  • D10 Test Quality: Assertion density is structural — it cannot tell a meaningful behavioural assertion from a trivial one, only that an assertion is present.
  • D13 REDACTED Scanning: REDACTED detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
  • D14 License Compliance: License compatibility is checked against declared package metadata and a policy — mislabelled or missing license metadata, and obligations that depend on how you distribute, are not resolved here.
  • D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
  • D16 Bus Factor: Bus-factor is a time-decayed model of commit attribution (who has recently, repeatedly worked a file), not comprehension — pairing, review and reading-without-committing spread knowledge it can't see; bot commits and shared accounts still distort it.
  • D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
  • D18 Solution Shape: Build integrity reflects whether the solution compiled in this environment — a build that needs a private feed, a specific SDK, or a generated file absent from the repo can read as broken when it is merely unreproducible here.
  • D19 Documentation Quality: Documentation quality publishes two things only: a runnable or packaged unit with no example, and a multi-project root README that maps none of its parts. It does not judge clarity, and its other checks (overview, licence, boilerplate, structure, empty sections, XML-doc coverage) are withheld after adjudication: their candidates are counted in the card's gaps, not shown as rows. A false statement in a document is M4's; units are .NET projects only.
  • D20 ADR Quality: ADR quality checks the structure of the decision records present: it cannot know about decisions made and never recorded, and it does not judge how well a record argues its case. Records in a language the section lexicon does not cover are not evaluated.
  • D21 Naming Consistency: Naming consistency compares each name with the convention its structural peers follow in this repository: it cannot tell whether a consistently used name is a good one, and languages other than C# and TypeScript are not measured.
  • D24 Comment Value: Comment value is measured as redundancy only: a comment that repeats its code's words is found, but a paraphrase in other words, a vague comment, or one the code contradicts is not, and whether a comment is valuable is not claimed. Comments in other scripts or languages, and outside C#, are not judged.
  • D26 Project Cohesion: Project focus is sized from members/namespaces per project — a project that is broad by deliberate design reads the same as one that has sprawled.
  • D27 Navigability: Indirection/navigability is structural — it measures hops to follow a call, not whether that indirection buys real flexibility or just ceremony.
  • D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
  • D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
  • D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
  • D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
  • D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
  • D44 Platform End-of-Life: The support table is FROZEN, so it goes out of date by losing RECALL: a release that ended support after the table was written is missed until the table is refreshed, and this dimension reading 10 is not evidence that a platform is current. Only platforms the repository DECLARES in a place this pass reads are seen — a runtime named only in a Dockerfile (D31's subject), in a CI workflow (D29's), or in a file this pass does not parse (go.mod, a Gemfile ruby directive) is invisible here, which is why a repository declaring none of them abstains rather than scoring. Only frameworks with a PUBLISHED support policy are tracked: React, Flask and Express publish none, so their age cannot be judged and their absence from a report is not a statement that they are supported.
  • AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
  • C4 Data Retention: This control is scored from in-repo evidence only — its real-world effectiveness, exercised only at runtime, is outside a static scan.
  • M4 Documentation accuracy: Documentation accuracy checks links, versions and artefact counts against the tree: other claims (paths, commands, settings, routes) are read but not checked, and it cannot run the onboarding or measure how long a real new joiner takes.
  • P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".
  • P5 DR & Backup: Backup/restore and disaster-recovery readiness is judged from in-repo evidence — a config that exists is not a tested restore, so the absence of positive evidence is reported as "not evidenced", never scored as present.
  • P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.

Dimensions

D1 · Cyclomatic Complexity5.8 / 10Adequate✓ Tool-verified

What it measures: How tangled the control flow is — methods with many branches are hard to test and change.

Method: Cyclomatic complexity per method (1 + decision points), computed exhaustively across production source; test projects separated by convention. Deterministic.

Maturity: Documented → Verified → Prevented · effective 5.8 / 10 · rule-coverage 100% · ceiling Prevented

130 method(s) exceeded the cyclomatic complexity threshold of 15; the worst was AddCommand.RunInner at 122. A further 32 method(s) were over the threshold but excluded as flat dispatchers (a long switch/match over independent cases: many branches, almost no nesting), the largest being Settings.ResolveKey at 164 — they are counted neither in the figure above nor in this dimension's score. 17 files carry no cyclomatic complexity row at all for this reason — every one of their over-threshold methods was excluded, so the exclusion is disclosed nowhere in the file itself: src/UniGetUI.Core.Settings/SettingsEngine_Names.cs (Settings.ResolveKey at 164), src/UniGetUI.Interface.IpcApi/IpcCliCommandRunner.cs (IpcCliCommandRunner.RunAsync at 92), src/UniGetUI.Interface.IpcApi/IpcCliSyntax.cs (IpcCliSyntax.TryMapCommand at 85), src/UniGetUI.PackageEngine.Managers.Dotnet/Helpers/DotNetPkgOperationHelper.cs (DotNetPkgOperationHelper._getOperationParameters at 20), src/UniGetUI.Interface.IpcApi/IpcAppApi.cs (IpcAppPages.ToPageName at 19), and 12 more not listed here. They are named here because the per-file figures other dimensions report are taken BEFORE this exclusion, so such a file can show a high maximum complexity elsewhere in this report and nothing here, with nothing to reconcile the two.

AddCommand.RunInner (cyclomatic 122)src/UniGetUI.AgentSkills.Cli/AddRun.cs:192
SearchMultiselect.Run (cyclomatic 100)src/UniGetUI.AgentSkills.Cli/SearchMultiselect.cs:136
PolicyEditorSessionViewModel.SaveCoreAsync (cyclomatic 53)src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:509
MainWindow.OnWindowsWndProc (cyclomatic 49)src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:1512
CargoBinaryResolver.ResolveAsync (cyclomatic 48)src/UniGetUI.PackageEngine.Managers.Cargo/CargoBinaryResolver.cs:36

+ 125 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

  1. Bring the 2 bodies over 60 down to 60 or less in Cyclomatic Complexity — start with AddCommand.RunInner (cyclomatic 122), SearchMultiselect.Run (cyclomatic 100). — This score is capped by its worst body, so a finding fixed alone moves it by almost nothing — the next one down takes its place. Refactoring these 2 together lifts Cyclomatic Complexity from 5.8 to about 6.5/10, projected with the scoring formula itself and assuming each lands exactly at 60; a cleaner split scores higher.

Detailed fixes: d1_recommendation.md · top locations in Appendix A, every location in findings.md.

D2 · Cognitive Complexity5.2 / 10Adequate✓ Tool-verified

What it measures: How hard the code is for a person to follow, beyond raw branching.

Method: Cognitive complexity per method (Sonar-style nesting-penalized score), computed exhaustively over production code, excluding test projects. Deterministic.

Maturity: Documented → Verified → Prevented · effective 5.2 / 10 · rule-coverage 100% · ceiling Prevented

200 method(s) exceeded the cognitive complexity threshold of 15; the worst was AddCommand.RunInner at 212.

AddCommand.RunInner (cognitive 212)src/UniGetUI.AgentSkills.Cli/AddRun.cs:192
SearchMultiselect.Run (cognitive 157)src/UniGetUI.AgentSkills.Cli/SearchMultiselect.cs:136
MainWindow.OnWindowsWndProc (cognitive 92)src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:1512
UpdateCommand.UpdateGlobalSkills (cognitive 82)src/UniGetUI.AgentSkills.Cli/Update.cs:302
SyncCommand.Run (cognitive 81)src/UniGetUI.AgentSkills.Cli/Sync.cs:112

+ 195 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

  1. Bring the 2 bodies over 120 down to 120 or less in Cognitive Complexity — start with AddCommand.RunInner (cognitive 212), SearchMultiselect.Run (cognitive 157). — This score is capped by its worst body, so a finding fixed alone moves it by almost nothing — the next one down takes its place. Refactoring these 2 together lifts Cognitive Complexity from 5.2 to about 5.8/10, projected with the scoring formula itself and assuming each lands exactly at 120; a cleaner split scores higher.

Detailed fixes: d2_recommendation.md · top locations in Appendix A, every location in findings.md.

D3 · God Classes7.9 / 10Strong✓ Tool-verified

What it measures: Over-large classes that try to do too much ("god classes").

Method: God-class detection by line and method-count thresholds per logical type (partial classes unified), filtered for generated code and registration/contract false positives. Deterministic.

Maturity: Documented → Verified → Prevented · effective 7.9 / 10 · rule-coverage 100% · ceiling Prevented

117 god class(es) detected.

TooManyMethods: MainWindow · ×43src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs
FileTooLong: Views/MainWindow.axaml.cs · ×39src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs
MethodTooLong: IpcCliCommandRunner.RunAsync · ×26src/UniGetUI.Interface.IpcApi/IpcCliCommandRunner.cs:19
ClassTooLong: IpcCliCommandRunner · ×9src/UniGetUI.Interface.IpcApi/IpcCliCommandRunner.cs

What to do

  1. Resolve the 43 TooManyMethods finding(s) in God Classes — start with MainWindow.axaml.cs, IpcClient.cs, REDACTED. — One of this dimension's main actionable groups (43 warning-level).
  2. Resolve the 39 FileTooLong finding(s) in God Classes — start with MainWindow.axaml.cs, AvaloniaAutoUpdater.cs, REDACTED. — One of this dimension's main actionable groups (39 warning-level).
  3. Resolve the 26 MethodTooLong finding(s) in God Classes — start with AvaloniaAutoUpdater.cs (2), PackageManagerPage.axaml.cs (2), AbstractOperation.cs (2). — One of this dimension's main actionable groups (26 warning-level).

Detailed fixes: d3_recommendation.md · top locations in Appendix A, every location in findings.md.

D4 · Code Duplication9.6 / 10Stronggated by 315 serious findings✓ Tool-verified

What it measures: Copy-pasted code that should be shared instead.

Method: Code duplication via token-stream sliding windows with type-aware normalization (locals masked, type names preserved), density-scored per KLoC of production code. Deterministic.

Maturity: Documented → Verified → Prevented · effective 9.6 / 10 · rule-coverage 100% · ceiling Verified

136 duplicated block group(s) detected. A further 244 rows report members as variants of one another; they aggregate block groups already counted above and are not themselves counted.

Duplicated block (5 lines × 2) · ×13src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:45
Duplicated block (8 lines × 2) · ×12src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs:184
Duplicated block (6 lines × 2) · ×12src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:424
Edited copy of a member (9 corresponding lines) · ×11src/UniGetUI.PackageEngine.Managers.MacPkg/MacPkg.cs:152
Edited copy of a member (15 corresponding lines) · ×10src/UniGetUI.PackageEngine.Managers.MacPkg/Helpers/MacPkgOperationHelper.cs:61

+ 120 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

  1. Resolve the 13 Duplicated block (5 lines × 2) finding(s) in Code Duplication — start with ClaudePluginService.cs (2), InstallOptionsViewModel.cs, AgentPluginsViewModel.cs. — One of this dimension's main actionable groups (13 warning-level).
  2. Resolve the 12 Duplicated block (8 lines × 2) finding(s) in Code Duplication — start with MaintenanceScheduler.cs (2), BaseNuGet.cs, StartMenuShortcutsDatabase.cs. — One of this dimension's main actionable groups (12 warning-level).
  3. Resolve the 12 Duplicated block (6 lines × 2) finding(s) in Code Duplication — start with SoftwareUpdatesPage.cs, IpcBundleApi.cs, IpcPackageApi.cs. — One of this dimension's main actionable groups (12 warning-level).

Detailed fixes: d4_recommendation.md · top locations in Appendix A, every location in findings.md.

D5 · Coupling8.7 / 10Adequategated by 5 critical findings✓ Tool-verified

What it measures: Whether volatile projects sit underneath others that depend on them (so their churn ripples upward), and whether project dependencies form cycles. A widely-depended-on but stable shared/kernel project is healthy, not penalised.

Method: Dependency cycles via elementary-DFS over real .csproj references, plus Martin instability (afferent/efferent) per project. Exhaustive over the reference graph, deterministic.

Coverage: Exhaustive · type-level: afferent/efferent coupling + cycles computed over every production type — the population is all types, not a name convention.

Maturity: Documented → Verified → Prevented · effective 8.7 / 10 · rule-coverage 100% · ceiling Prevented

107 projects, 0 dependency cycle(s), 5 unstable depended-on project(s).

Layer violation: Domain → Infrastructure · ×5src/UniGetUI.Core.IconStore/UniGetUI.Core.IconEngine.csproj:7
Off the main sequence: UniGetUI.Core.Logging(net10.0) · ×11src/UniGetUI.Core.Logger/UniGetUI.Core.Logging.csproj:1
Unstable project UniGetUI.PackageEngine.Managers.Chocolateysrc/UniGetUI.PackageEngine.Managers.Chocolatey/UniGetUI.PackageEngine.Managers.Chocolatey.csproj:1
Unstable project UniGetUI.PackageEngine.Managers.PowerShellsrc/UniGetUI.PackageEngine.Managers.PowerShell/UniGetUI.PackageEngine.Managers.PowerShell.csproj:1
Unstable project UniGetUI.PackageEngine.Managers.Scoopsrc/UniGetUI.PackageEngine.Managers.Scoop/UniGetUI.PackageEngine.Managers.Scoop.csproj:1

+ 2 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

  1. Resolve the 5 Layer violation finding(s) in Coupling — start with UniGetUI.Core.IconEngine.csproj, UniGetUI.Core.LanguageEngine.csproj, UniGetUI.Core.SecureSettings.csproj. — One of this dimension's main actionable groups (5 issue-level).
  2. Resolve the 11 Off the main sequence finding(s) in Coupling — start with UniGetUI.Core.Logging.csproj, UniGetUI.Interface.Enums.csproj, UniGetUI.PackageEngine.Structs.csproj. — One of this dimension's main actionable groups (11 warning-level).
  3. Resolve the 1 Unstable project UniGetUI.PackageEngine.Managers.Chocolatey finding(s) in Coupling — start with UniGetUI.PackageEngine.Managers.Chocolatey.csproj. — One of this dimension's main actionable groups (1 warning-level).

Detailed fixes: d5_recommendation.md · top locations in Appendix A, every location in findings.md.

D6 · Cohesion (LCOM4)10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether a class's methods are focused on a single responsibility.

Method: LCOM4 cohesion per production class with at least two methods: connected components of methods sharing state or calls, computed syntactically. Deterministic, not a proxy.

Coverage: Exhaustive · type-level: LCOM4 cohesion computed over every production class — the population is all types, not a name convention.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Verified

0 of 167 classes have LCOM4 above 3.

✓ On the Gold path — maintain.

Detailed fixes: d6_recommendation.md.

D10 · Test Quality10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether the tests truly assert behaviour rather than just running the code.

Method: Per-test assertions, skips, and mock references analyzed via Roslyn; structured skip-reason tags (BUG:/ENV:) separate documented deferrals from debt. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

0 skipped, 0 zero-assertion, 1 mock references across 3025 tests.

Mock framework: NSubstitute

✓ On the Gold path — maintain.

Detailed fixes: d10_recommendation.md · top locations in Appendix A, every location in findings.md.

D13 · REDACTED Scanning10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets (keys, tokens, passwords) have leaked into the code.

Method: In-process native secret scanner (entropy plus signature patterns) across all tracked files; no external tool. A clean result is a measured 10, not no-data zero. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

REDACTED scan ran and found no leaked secrets.

✓ On the Gold path — maintain.

Detailed fixes: d13_recommendation.md.

D14 · License Compliance10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether the licenses of third-party packages are compatible with your policy.

Method: Third-party package licenses resolved from declared package metadata and checked against the configured policy (allow/deny/copyleft). Deterministic; clean = no incompatible license found at metadata depth.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Verified

0 of 331 packages use a banned license. ★ DEPTH: this repository's MSBuild projects declare 44 direct `PackageReference`(s), and 210 further package(s) were reached beyond them by closing the graph over nuget.org's own nuspec dependency graph — so a banned licence pulled in only by a dependency's OWN dependencies is inside this verdict. A package whose licence nuget.org could not be asked for is not graded, and version ranges are taken at their lower bound, so this is the closure as that graph states it rather than a restored consumer's exact resolution.

✓ On the Gold path — maintain.

Detailed fixes: d14_recommendation.md.

D15 · Churn × Complexity Hotspots9.5 / 10Stronggated by 40 serious findings✓ Tool-verified

What it measures: Files that change often and are also complex — the riskiest hotspots.

Method: Per production file churn times cyclomatic complexity over a rolling window, computed from git and Roslyn/JS/Razor analysis. Exhaustive, deterministic per commit date.

Maturity: Documented → Verified → Prevented · effective 9.5 / 10 · rule-coverage 100% · ceiling Documented

Top hotspots: src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs (35×49=1715); src/UniGetUI.Avalonia/Views/SoftwarePages/AbstractPackagesPage.axaml.cs (19×40=760); src/UniGetUI.PackageEngine.Managers.WinGet/Helpers/WinGetPkgOperationHelper.cs (15×38=570)

Hotspot: src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs · ×40src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:1512

What to do

  1. Resolve the 40 Hotspot finding(s) in Churn × Complexity Hotspots — start with MainWindow.axaml.cs, AbstractPackagesPage.axaml.cs, WinGetPkgOperationHelper.cs. — One of this dimension's main actionable groups (40 warning-level).

Detailed fixes: d15_recommendation.md · top locations in Appendix A, every location in findings.md.

D16 · Bus Factor9.0 / 10Strong✓ Tool-verified

What it measures: Whether knowledge is concentrated in too few people (the "bus factor").

Method: Living knowledge per author via time-decayed commit attribution (6-month half-life, focus weighting) across largest source files. Deterministic, avoids blame's mechanical-refactor false positives.

Maturity: Documented → Verified → Prevented · effective 9.0 / 10 · rule-coverage 100% · ceiling Documented

53 source file(s) have their living knowledge concentrated in one author (≥90% of recent, decayed contribution). The largest is src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs. Counted over 521 of the 767 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.

Off-boarding risk: anonymized user #1
Further sole-owners (lower concentration)

What to do

  1. Resolve the 1 Off-boarding risk finding(s) in Bus Factor. — One of this dimension's main actionable groups (1 recommendation-level).
  2. Resolve the 1 Further sole-owners (lower concentration) finding(s) in Bus Factor. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d16_recommendation.md · top locations in Appendix A, every location in findings.md.

D17 · Explicit Debt9.0 / 10Adequategated by 69 critical findings✓ Tool-verified

What it measures: Acknowledged debt left in the code — TODOs, dead code, suppressed warnings.

Method: Roslyn syntactic debt markers (suppressions/TODO/FIXME/HACK/empty-catch/commented-code/Obsolete) plus SymbolFinder dead-code analysis; weighted-debt-per-KLoC density deducted 2.0x per unit. Deterministic, exhaustive.

Maturity: Documented → Verified → Prevented · effective 9.0 / 10 · rule-coverage 100% · ceiling Prevented

91 deducted debt markers + unmeasured dead symbols across 149682 LoC in the .NET projects (0.5/KLoC) → score 9.0. Dead code not measured: the solution did not load cleanly, so the reference search was skipped.

EmptyCatchBlock · ×64src/Shared/AutoUpdater.Helpers.cs:504
NoWarnInCsproj · ×3src/UniGetUI.Avalonia/UniGetUI.Avalonia.csproj:45
FileScopedPragmaDisable · ×2src/UniGetUI.Core.Classes.Tests/SortableObservableCollectionTests.cs:1
TodoComment · ×6src/UniGetUI.PackageEngine.Managers.Bun/Bun.cs:390
BarePragmaDisable · ×3src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:1884

+ 2 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

  1. Resolve the 64 EmptyCatchBlock finding(s) in Explicit Debt — start with AutoUpdater.Helpers.cs (3), CrashHandler.cs (3), AvaloniaAutoUpdater.cs (3). — One of this dimension's main actionable groups (64 issue-level).
  2. Resolve the 3 NoWarnInCsproj finding(s) in Explicit Debt — start with UniGetUI.Avalonia.csproj (2), Directory.Build.props. — One of this dimension's main actionable groups (3 issue-level).
  3. Resolve the 2 FileScopedPragmaDisable finding(s) in Explicit Debt — start with SortableObservableCollectionTests.cs, LoggerTests.cs. — One of this dimension's main actionable groups (2 issue-level).

Detailed fixes: d17_recommendation.md · top locations in Appendix A, every location in findings.md.

D18 · Solution Shape10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether the solution is laid out in a sensible, conventional structure.

Method: Solution structure: project count, decomposition, shell-project detection, build success (confirmed failures cap the score); traced to actual .sln files and binaries. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

106 projects, 1746 source files, 233164 hand-written lines of code (149521 production / 83643 test — the split is derived per file: test is what its project, its own path, or a compile-guarded region marks as test, and a file carrying no test signal counts as production), 731 inter-project edges (build NOT measured — `dotnet build` did not complete in the analyzer, so the build half of this dimension is unmeasured rather than failed: the score above rests on structure alone and is not capped. The diagnostics that stopped it are named under Limitations.)

✓ On the Gold path — maintain.

Detailed fixes: d18_recommendation.md.

D19 · Documentation Quality10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether the project's documentation is clear, complete, and useful.

Method: Every README, docs/ document and root guide parsed by its markup and measured in Unicode letters. Published: a runnable or packaged .NET project whose README (or a document it links, or a root guide) shows no example, and a root README naming none of three or more projects. Overview, licence, boilerplate, wall-of-text, empty-section and XML-doc rows are measured and withheld (counted in gaps) after adjudication. Deterministic, exhaustive, advisory.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

2 of 2 documentation facets pass in full. 12 document(s) read across 53 unit(s).

✓ On the Gold path — maintain.

Detailed fixes: d19_recommendation.md.

D20 · ADR Quality0.0 / 10Critical✓ Tool-verified

What it measures: Whether architecture decisions are recorded well (context, decision, consequences).

Method: Every ADR read by its section structure: nine located rules (a missing Decision, Context or Consequences section, a stale status, two records deciding the same question, a dangling supersede link, a number-only title, a single option, no named cost, no status where the log uses one, no enforcement field where the log adopted one), each a fixed deduction from 10; the score is the mean over evaluated records. Deterministic, no model. Advisory.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

No architecture decision records were found.

No ADRs found

What to do

  1. Resolve the 1 No ADRs found finding(s) in ADR Quality. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d20_recommendation.md · top locations in Appendix A, every location in findings.md.

D21 · Naming Consistency8.4 / 10Strong✓ Tool-verified

What it measures: Whether names — types, methods, variables — are clear and consistent.

Method: Seven vocabulary-free rules (N1-N7) mine each naming convention from the repository and flag a name that breaks a convention its structural peers in the same unit follow; production C# and TypeScript, each its own population. Deterministic, no model, no sample. Advisory.

Maturity: Documented → Verified → Prevented · effective 8.4 / 10 · rule-coverage 100% · ceiling Verified

2 naming inconsistencies among 128 declarations measured against a convention their peers follow.

`LicenseURL` spells `URL` where 38 names in the project spell it `Url`src/UniGetUI.Avalonia/ViewModels/Pages/AboutPages/ThirdPartyLicensesViewModel.cs:11
`PackageID` spells `ID` where 76 names in the project spell it `Id`src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs:80

What to do

  1. Resolve the 1 `LicenseURL` spells `URL` where 38 names in the project spell it `Url` finding(s) in Naming Consistency — start with ThirdPartyLicensesViewModel.cs. — One of this dimension's main actionable groups (1 recommendation-level).
  2. Resolve the 1 `PackageID` spells `ID` where 76 names in the project spell it `Id` finding(s) in Naming Consistency — start with PackagesPageViewModel.cs. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d21_recommendation.md · top locations in Appendix A, every location in findings.md.

D24 · Comment Value9.7 9.5 / 10Exemplary✓ Tool-verified

What it measures: Whether comments are worth it — explaining WHY (valuable) rather than WHAT (redundant).

Method: Every inline C# comment compared word by word with the identifiers, literals and constructs of the code it annotates (taken from the syntax); a comment whose words that code already contains is redundant, as are closing-brace labels and generator template text. Comments giving a reason or a reference are kept; other scripts and languages are not judged. Deterministic, exhaustive, advisory.

Maturity: Documented → Verified → Prevented · effective 9.5 / 10 · rule-coverage 98% · ceiling Documented

5 of 1596 judged comments only repeat the code they sit on (0.3 %). 48 comment(s) in another language or script were not judged.

redundant comment · ×5src/UniGetUI.Avalonia/Views/Pages/SettingsPages/PackageManagerPage.axaml.cs:77
doc comments repeat the names · ×9src/WindowsPackageManager.Interop/WindowsPackageManager/ClassModel.cs:26

✓ On the Gold path — maintain.

Detailed fixes: d24_recommendation.md · top locations in Appendix A, every location in findings.md.

D26 · Project Cohesion9.7 / 10Exemplary✓ Tool-verified

What it measures: Whether each project is a focused, coherent unit rather than an oversized grab-bag.

Method: Project size overshoot penalties (LoC / public-type count / namespace count, 2-of-3 flag) weighted by log magnitude. Exhaustive across projects, deterministic.

Maturity: Documented → Verified → Prevented · effective 9.7 / 10 · rule-coverage 100% · ceiling Documented

1 of 66 projects flagged as possibly oversized/incoherent.

Projects may be oversized for their cohesionsrc/UniGetUI.Avalonia/UniGetUI.Avalonia.csproj:1

✓ On the Gold path — maintain.

Detailed fixes: d26_recommendation.md · top locations in Appendix A, every location in findings.md.

D27 · Navigability9.1 / 10Exemplary✓ Tool-verified

What it measures: How far you must trace to follow a call — low indirection and co-located slices read easier.

Method: Call indirection (interface hops, cross-namespace calls, slice-locality scaled) over a sampled set of method invocations, size-aware baseline. Sampled; confidence discounted by symbol-resolution gaps. C# also names each pass-through layer (a class whose every public method only forwards its own parameters to one collaborator) as a located finding; the score is not affected.

Coverage: Slice locality from the first namespace segments, SAMPLED (≤400 methods) — not exhaustive.

Maturity: Documented → Verified → Prevented · effective 9.1 / 10 · rule-coverage 100% · ceiling Documented

85 % of calls cross a namespace and 6 % go through an interface, but 100 % of collaborators are co-located — so a call's collaborators sit together and tracing stays easy. Baseline: large — vertical-slice locality expected.

Pass-through layersrc/UniGetUI.Tui/Views/Pages/ManagersPage.cs:22

✓ On the Gold path — maintain.

Detailed fixes: d27_recommendation.md · top locations in Appendix A, every location in findings.md.

D28 · Secrets (history)5.0 / 10Adequate✓ Tool-verified

What it measures: Whether any secrets were ever committed — scanned across the full git history, not just now.

Method: REDACTED scan via TWO gitleaks detect passes in an isolated checkout — the full git history, then a second --no-git pass over the working tree as it stands — merged and de-duplicated by (rule, file, line); each match flagged High. Both invocations are recorded in the audit trail. Exhaustive; when the tool is absent, or when its output cannot be parsed into the expected shape, the dimension is WITHHELD as an explicit measurement gap on our side — unscored and excluded from the lens, never a hedged middling score.

Maturity: Documented → Verified → Prevented · effective 5.0 / 10 · rule-coverage 100% · ceiling Documented

5 finding(s): 0 critical, 5 high, 0 medium, 0 low. Remediation for historically-committed secrets is credential rotation — they remain in history regardless of later deletion.

REDACTED
REDACTED

What to do

  1. Resolve the 5 REDACTED finding(s) in Secrets (history) — start with REDACTED (4), REDACTED. — One of this dimension's main actionable groups (5 issue-level).
  2. Resolve the 1 Rotate the exposed credentials finding(s) in Secrets (history). — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d28_recommendation.md · top locations in Appendix A, every location in findings.md.

D29 · Static Analysis (SAST)0.0 / 10Critical✓ Tool-verified

What it measures: Real static-analysis (SAST) findings — likely security bugs in the code, any language.

Method: Polyglot static analysis via semgrep across the repo using the pinned, image-baked p/security-audit + p/owasp-top-ten rulesets (no scan-time registry fetch); severity rules (ERROR/WARNING/INFO) map to a full-band severity-weighted score. Exhaustive, deterministic; degrades on parse failure.

Coverage: semgrep pattern rules over all files — exhaustive for the rule set, blind to classes of bug without a rule (clean = no rule matched).

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

126 finding(s): 0 critical, 78 high, 48 medium, 0 low. 61 unpinned-GitHub-Actions row(s) are reported here but scored by D36 (supply-chain provenance), which measures that posture as `pinned_actions` — one pinning decision is charged once, not once per lens. semgrep hit a parse error in 234 file(s) — `scripts/CargoSmoke/Program.cs` (lines 148–149, line 164), `src/Shared/SharedPreUiCommandDispatcher.cs` (lines 399–415, line 417, lines 453–455, …), `src/Shared/StartupBundleArguments.cs` (lines 9–106), `src/UniGetUI.AgentSkills.Cli/AddRun.cs`, `src/UniGetUI.AgentSkills.Cli/GitHubRelease.cs` (line 12), … (+229 more) — so no absence of findings in the named regions is evidence of anything; rows reported elsewhere in those files are real. Fix the syntax error (or exclude the file deliberately) and re-scan to cover them. In 91 of those file(s) — `scripts/CargoSmoke/Program.cs`, `src/UniGetUI.AgentSkills.Cli/AddRun.cs`, `src/UniGetUI.AgentSkills.Cli/GitHubRelease.cs`, `src/UniGetUI.AgentSkills.Cli/Notion.cs`, `src/UniGetUI.AgentSkills.Cli/SearchMultiselect.cs`, … (+86 more) — the break is a C# primary constructor, which semgrep's grammar cannot parse and which hides the type from every rule scoped to it; those files were re-scanned from a shadow copy with the constructor's parameter list blanked (line and column preserving), which restores the type to the rules, and 0 additional row(s) came from that pass. Only the header's own parameter list is unread in them. In 38 of those file(s) — `src/Shared/SharedPreUiCommandDispatcher.cs`, `src/Shared/StartupBundleArguments.cs`, `src/UniGetUI.AgentSkills.Cli/GitHubRelease.cs`, `src/UniGetUI.AgentSkills.Cli/Notion.cs`, `src/UniGetUI.AgentSkills.Cli/Use.cs`, … (+33 more) — the break is at a TYPE DECLARATION (a C# primary constructor semgrep's grammar cannot parse), so the loss is wider than the named lines: rules scoped to that type see no type to scope to and are blind over its whole body, while rules matching statements keep working there. Absence of a type-scoped finding in those types is not evidence of anything. Separately, one or more rules could not re-parse an embedded snippet in 9 file(s) (e.g. a workflow `run:` block read as shell). Those files WERE scanned and their other rows are unaffected; only those rules' view of those snippets is missing.

REDACTED
REDACTED
REDACTED
REDACTED
REDACTED

+ 9 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

  1. Resolve the 5 REDACTED finding(s) charged to Static Analysis (SAST) — the other 61 are reported here at file:line but scored by D36 (supply-chain provenance), which charges them once. — One of this dimension's main actionable groups (66 issue-level, 5 of them charged here).
  2. Resolve the 3 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED, REDACTED, REDACTED. — One of this dimension's main actionable groups (3 issue-level).
  3. Resolve the 2 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED, REDACTED. — One of this dimension's main actionable groups (2 issue-level).

Detailed fixes: d29_recommendation.md · top locations in Appendix A, every location in findings.md.

D34 · Knowledge Freshness9.8 / 10Exemplary✓ Tool-verified

What it measures: Whether anyone still has living knowledge of each file, or it has been orphaned — last understood long ago by someone now gone quiet. The sibling of the bus factor: D16 asks who owns it, D34 asks whether anyone still knows it.

Method: File orphaning as total living-knowledge decay below one focused-commit's worth within a year, computed per-file from the D16 decay model. Exhaustive, deterministic over fixed history.

Maturity: Documented → Verified → Prevented · effective 9.8 / 10 · rule-coverage 100% · ceiling Documented

12 of 521 significant source file(s) are orphaned — their living knowledge has decayed to nothing, so no one currently understands them. The largest is src/UniGetUI.Core.LanguageEngine/LanguageData.cs. Counted over 521 of the 767 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.

Orphaned file · ×12src/UniGetUI.Core.LanguageEngine/LanguageData.cs:1
Orphaned files with no living knowledge

✓ On the Gold path — maintain.

Detailed fixes: d34_recommendation.md · top locations in Appendix A, every location in findings.md.

D35 · Change Coupling9.9 / 10Adequategated by 1 critical finding✓ Tool-verified

What it measures: Whether files that change together actually belong together — pairs that repeatedly co-change in git history despite having no explicit code dependency, surfacing the hidden/logical coupling (and boundaries in the wrong place) a static scan can't see.

Method: Pairwise co-occurrence over the per-commit file sets in git history (production source only — tests and generated dropped): Degree-of-Coupling = shared ÷ min individual revisions, reported above noise floors (each file ≥10 revisions, ≥5 shared commits, ≥50% strength); sweeping commits excluded. Deterministic over fixed history.

Coverage: Population: PRODUCTION source files only — test and generated files are dropped before pairing, so a class co-changing with its own test (trivially ~100%) can't drown the real production↔production coupling. Pairs ranked by Degree-of-Coupling. A non-source file is never a coupling PARTICIPANT either: documentation, schemas, config and data files are dropped with the rest, so a code↔docs pair — a command and the reference page that restates it — is not reported however strongly the two co-change; nor is coupling that runs THROUGH a build step or config file.

Maturity: Documented → Verified → Prevented · effective 9.9 / 10 · rule-coverage 100% · ceiling Documented

Strongest change-coupling: InstalledPackagesPage.cs↔SoftwareUpdatesPage.cs 86%; PackageBundlesPage.cs↔SoftwareUpdatesPage.cs 60%; ChocolateyDetailsHelper.cs↔WinGetCliHelper.cs 58%

Boundary-crossing change coupling: ChocolateyDetailsHelper.cs ↔ WinGetCliHelper.cssrc/UniGetUI.PackageEngine.Managers.Chocolatey/Helpers/ChocolateyDetailsHelper.cs:1
Change coupling: PingetCliHelper.cs ↔ WinGetCliHelper.cs · ×3src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/PingetCliHelper.cs:1
Change coupling clique: InstalledPackagesPage.cs, PackageBundlesPage.cs, SoftwareUpdatesPage.cssrc/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs

What to do

  1. Resolve the 1 Boundary-crossing change coupling finding(s) in Change Coupling — start with ChocolateyDetailsHelper.cs. — One of this dimension's main actionable groups (1 issue-level).
  2. Resolve the 3 Change coupling finding(s) in Change Coupling — start with PingetCliHelper.cs, BaseSourceHelper.cs, ImportedPackage.cs. — One of this dimension's main actionable groups (3 warning-level).
  3. Resolve the 1 Change coupling clique finding(s) in Change Coupling — start with InstalledPackagesPage.cs. — One of this dimension's main actionable groups (1 warning-level).

Detailed fixes: d35_recommendation.md · top locations in Appendix A, every location in findings.md.

D36 · Supply-chain Provenance & Signing2.5 / 10Weak✓ Tool-verified

What it measures: Whether the build pipeline provides supply-chain integrity — generated provenance/attestation, signed artifacts (cosign/sigstore), an SBOM, and pinned build actions. Presence of the configuration, not a runtime guarantee.

Method: Supply-chain provenance/signing read deterministically from CI/build config (.github/workflows, .gitlab-ci.yml, azure-pipelines, Jenkinsfile, .circleci) + the release surface: four signals — generated provenance/attestation (SLSA/in-toto/actions-attest), artifact signing (cosign/sigstore/gitsign), an SBOM (syft/sbom-action/*.spdx.json/*.cdx.json), and SHA-pinned build actions — scored 10·present/denom. NotApplicable without a build pipeline. Detects configuration presence, not runtime enforcement.

Maturity: Documented → Verified → Prevented · effective 2.5 / 10 · rule-coverage 100% · ceiling Documented

1/4 supply-chain integrity signals present (provenance, signing, SBOM, pinned actions).

REDACTED
REDACTED
REDACTED
REDACTED
REDACTED

+ 2 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

  1. Resolve the 3 REDACTED finding(s) in Supply-chain Provenance & Signing — start with REDACTED, REDACTED, REDACTED. — One of this dimension's main actionable groups (3 warning-level).
  2. Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 warning-level).
  3. Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).

Detailed fixes: d36_recommendation.md · top locations in Appendix A, every location in findings.md.

D43 · Malicious Dependencies10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether any dependency the repository declares is published as MALICIOUS rather than merely vulnerable — a package that is an attacker's work, in any ecosystem osv-scanner reads. Reported apart from D30 because the answer is binary: there is no safe version to upgrade to, and the fix is to remove the package and rotate every credential it could have read.

Method: The same dependency scan D30 reads, partitioned on the scanner's own classification rather than rescanned: a row is MALICIOUS when its id is in the `MAL-` space (the ossf/malicious-packages feed) OR its `database_specific.cwe_ids` carries `CWE-506` ("Embedded Malicious Code"). Both channels are structural; the summary text is deliberately NOT read, because a malicious-package record whose summary says only "Critical severity vulnerability" is a real shape ([GHSA redacted]) and a text matcher misses it. Scored BINARY: any surviving row is 0, whatever its severity and however many CVEs sit beside it — a hostile dependency is not a quantity. Applicability and degradation are D30's: NotApplicable only when no ecosystem is readable, and an unscannable ecosystem degrades rather than reading clean. Advisory since rubric-2026.11.2 (CAI decision 0006): the malicious-package feed is a database that changes daily, so the reading is shown and never moves a scored dimension, lens or the headline.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No dependency in any ecosystem this repository declares is published as malicious.

✓ On the Gold path — maintain.

Detailed fixes: d43_recommendation.md.

D44 · Platform End-of-Life10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether anyone still ships security patches for the platform this repository RUNS ON — the runtime it pins and the framework majors its own constraints hold it to. Separate from D12 because the question differs: a current Django on an end-of-life Python is perfectly up to date and completely unsupported, and the fix is a migration rather than a version bump. What the repository says it merely SUPPORTS is never charged.

Method: End-of-life PLATFORM read from the repository's own declarations and graded against a FROZEN, dated table of vendor support dates — no network, no feed, no API, so this dimension answers identically inside a closed scan fence. Two subjects: a RUNTIME the project pins (a single or all-end-of-life TargetFramework, a .nvmrc or .python-version, a requires-python CAP) and a FRAMEWORK major a dependency constraint cannot move off (a caret, tilde or exact version; `vue@^2.7.16` pins Vue 2). A FLOOR is deliberately never charged — `requires-python = ">=3.8"` states what a package SUPPORTS, not what it runs on — and a multi-target project is charged only when EVERY target is out of support. Runtime 4.0/product capped 8.0, framework 1.5 capped 4.5. The table is safe to freeze because a statement about support that ended in the past cannot become false: it loses recall as it ages, never precision, and a test asserts every entry predates the freeze date. Disjoint from D31 (a container image's OS layer) and D29 (the toolchain a CI workflow installs). Abstains when the repository declares no platform this pass reads — never scores it clean.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

0 end-of-life runtime(s) and 0 end-of-life framework(s), read from 62 platform declaration(s) and 0 dependency declaration(s). This dimension reads what the repository says about ITSELF — a pinned target framework, a version file, a capped requires-python, a Rust toolchain pin, a framework major a constraint cannot move off. A FLOOR is deliberately never charged: `requires-python = ">=3.8"` states what the package SUPPORTS, not what it runs on, and a well-maintained library declares exactly that while running its own CI on a current release. The end-of-life facts are FROZEN and dated, so this dimension needs no network and answers identically inside a closed scan fence; as the table ages it loses recall and never precision, because a statement about support that ended in the past cannot become false. The OS layer of a container image is D31's question and the toolchain a CI workflow installs is D29's; this row is neither.

✓ On the Gold path — maintain.

Detailed fixes: d44_recommendation.md.

Frontend & cross-cutting dimensions

R = React/JS · M = Maturity · P = Readiness.

AX1 · Captive dependencies10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether any singleton service captures a scoped/transient dependency — a silent lifetime/threading bug.

Method: Roslyn scan: DI registrations parsed from AddSingleton/Scoped/Transient; each singleton checked for captured shorter-lifetime dependencies. Exhaustive, deterministic.

AX10 · Code composition9.4 / 10Exemplary✓ Tool-verified

Other · Architecture — How the codebase splits by code ROLE — domain, application, infrastructure, test, generated. The significance map behind the knowledge/coupling weighting, and a DDD signal in its own right: a thin domain core under fat infrastructure is the anemic-domain smell, quantified. How each file's role is decided, because the split is only as good as that: a generated name or a build-output tree makes it Generated, a test project makes it Test, and otherwise the file's NAMESPACE and PATH words are matched against fixed vocabularies in a fixed ORDER — domain, then infrastructure, then application — so a file whose words hit two layers is counted under the earlier one. A production file matching none of them counts as application, so that share reads 'application or unclassified' rather than a measured application layer. Roles come from naming convention, never from what the code does.

Method: Roslyn line-count by code ROLE: every source file classified Domain/Application/Infrastructure/Test/Generated by namespace + path convention (the shared CodeRoleClassifier), then significant lines summed per role. Deterministic; the advisory score is the business-logic (domain+application) share of production code.

Coverage: Population: ALL source files, each bucketed into ONE of five roles (Domain/Application/Infrastructure/Test/Generated) by namespace + path convention — a file whose layer isn't named in the convention falls to Application (the neutral default), and the split is line-count, not semantic depth or business value.

What to do

  • The domain core is a small share of production code, but most of the rest matched no layer vocabulary at all — so this is not yet an anemic-domain finding. The namespace/path convention could not place that code, which makes the composition above a statement about the naming, not about the design. Name the layers (or check that the repository's conventions differ from the ones this check knows) before reading a thin domain into it.
AX2 · Stateful singletons1.0 / 10Critical✓ Tool-verified

Other · Architecture — Whether singleton services avoid mutable shared instance state that concurrent callers would race on.

Method: Roslyn scan: singleton field mutations unguarded by lock or Interlocked, per type; syntax-based guard detection. Deterministic, traceable per field.

  • `OperationViewModel` is not registered, but `AvaloniaOperationRegistry` creates it and keeps it in the static `OperationViewModels`, so that one instance serves the whole process and is shared by every thread that reaches it — and it mutates instance state outside any lock (LiveLine, ProgressIndeterminate, ProgressValue, _visualStatus, ButtonText, _menuState; e.g. `LiveLine` at line 99). — src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationViewModel.cs:37
  • `IpcServer` is not registered, but `AvaloniaBootstrapper` creates it and keeps it in the static `_ipcApi`, so that one instance serves the whole process and is shared by every thread that reaches it — and it mutates instance state outside any lock (_transportOptions, _namedPipePath, _host; e.g. `_transportOptions` at line 70). — REDACTED:28
  • `IconDatabase` keeps one instance of itself in the static `__instance`, so that one instance serves the whole process and is shared by every thread that reaches it — and it mutates instance state outside any lock (IconDatabaseData, __icon_count; e.g. `IconDatabaseData` at line 134). — src/UniGetUI.Core.IconStore/IconDatabase.cs:12
  • `LanguageEngine` is not registered, but `CoreTools` creates it and keeps it in the static `LanguageEngine`, so that one instance serves the whole process and is shared by every thread that reaches it — and it mutates instance state outside any lock (Locale, MainLangDict, Formatter; e.g. `Locale` at line 53). — src/UniGetUI.Core.LanguageEngine/LanguageEngine.cs:12
  • `InstallOptions` is not registered, but `InstallOptionsFactory` creates it and keeps it in the static `_optionsCache`, so that one instance serves the whole process and is shared by every thread that reaches it — and it mutates instance state outside any lock (OverridesNextLevelOpts; e.g. `OverridesNextLevelOpts` at line 300). — src/UniGetUI.PackageEngine.Serializable/InstallOptions.cs:8
  • `DownloadOperation` is not registered, but `TuiPackageActions` creates it and keeps it in the static `TuiOperationRegistry._ops`, so that one instance serves the whole process and is shared by every thread that reaches it — and it mutates instance state outside any lock (SkipHashCheck, HashMismatched, downloadLocation, _rejectedFile, _rejectedHash, _rejectedUrl; e.g. `SkipHashCheck` at line 78). — src/UniGetUI.PackageEngine.Operations/DownloadOperation.cs:12
  • `ManagerSettingsDialog` keeps one instance of itself in the static `TuiModal._stack`, so that one instance serves the whole process and is shared by every thread that reaches it — and it mutates instance state outside any lock (_sources; e.g. `_sources` at line 114). — src/UniGetUI.Tui/Views/Pages/ManagersPage.cs:90
  • `OperationCardController` is not registered, but the singleton `OperationViewModel` creates it and keeps it in `_controller`, so one instance outlives every request and is shared by every caller that reaches it — and it mutates instance state outside any lock (_card, _lastLogLine, _determinateProgressActive; e.g. `_card` at line 42). — src/UniGetUI.PackageEngine.Operations/OperationCardController.cs:15
  • `AttemptScope` is not registered, but the singleton `UpdaterAttemptCoordinator` creates it and keeps it in `_activeScope`, so one instance outlives every request and is shared by every caller that reaches it — and it mutates instance state outside any lock (_isManualCheck, _isSuperseded, _awaitingConsentVersion; e.g. `_isManualCheck` at line 527). — src/Shared/AutoUpdater.Helpers.cs:442
  • `TuiForm` is not registered, but the singleton `AboutDialog` creates it and keeps it in `_form`, so one instance outlives every request and is shared by every caller that reaches it — and it mutates instance state outside any lock (_refreshers; e.g. `_refreshers` at line 42). — src/UniGetUI.Tui/Views/Controls/TuiForm.cs:24
  • `App` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_terminationSignalsReceived, _terminationSignals; e.g. `_terminationSignalsReceived` at line 270). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Avalonia/App.axaml.cs:29
  • `StartMenuLocation` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_roots; e.g. `_roots` at line 389). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Avalonia/ViewModels/DialogPages/ManageShortcutsViewModel.cs:385
  • `SmoothScrollManager` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_classHandler; e.g. `_classHandler` at line 75). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Avalonia/Views/Controls/SmoothScrollManager.cs:22
  • `InstalledPackagesPage` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_hasBackedUp; e.g. `_hasBackedUp` at line 69). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:23
  • `AvaloniaOperationRegistry` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_shortcutDialogOpen; e.g. `_shortcutDialogOpen` at line 368). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Avalonia/Infrastructure/AvaloniaOperationRegistry.cs:25
  • `MicaWindowHelper` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_acrylicPopupsHooked, _micaConfirmedUnavailable; e.g. `_acrylicPopupsHooked` at line 58). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Avalonia/Infrastructure/MicaWindowHelper.cs:21
  • `MemoryTrimmer` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_timer; e.g. `_timer` at line 26). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Avalonia/Infrastructure/MemoryTrimmer.cs:12
  • `MaintenanceScheduler` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_started, _timer, _isHeadless, _headlessTimer, _pendingInstallSince, _pendingCheckSince; e.g. `_started` at line 39). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:10
  • `AvaloniaAutoUpdater` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (PendingUpdate, _pendingInstallerPath, ReleaseLockForAutoupdate_Notification, InstallerLaunched; e.g. `PendingUpdate` at line 86). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:28
  • `AvaloniaBootstrapper` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_hasStarted, _brokerUnavailableDialogActive, _ipcApi; e.g. `_hasStarted` at line 44). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Avalonia/Infrastructure/AvaloniaBootstrapper.cs:24
  • `SingleInstanceRedirector` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_listener; e.g. `_listener` at line 52). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Avalonia/Infrastructure/SingleInstanceRedirector.cs:19
  • `WindowsAvaloniaRenderingPolicy` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_shouldUseSoftwareRendering, _hasHardwareGpu; e.g. `_shouldUseSoftwareRendering` at line 30). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Avalonia/Infrastructure/WindowsAvaloniaRenderingPolicy.cs:11
  • `Ui` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_cursorHidden; e.g. `_cursorHidden` at line 421). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.AgentSkills.Cli/Ui.cs:33
  • `CoreData` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (__code_page, __console_encoding, _sanitizedProcessArguments; e.g. `__code_page` at line 16). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Core.Data/CoreData.cs:7
  • `LanguageData` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (__translators_list, __language_reference, __translation_percentages; e.g. `__translators_list` at line 20). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Core.LanguageEngine/LanguageData.cs:10
  • `AppPaths` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (__installation_directory, __elevated_temp_directory; e.g. `__installation_directory` at line 43). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Core.Logger/AppPaths.cs:7
  • `Logger` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (LogContents; e.g. `LogContents` at line 37). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Core.Logger/Logger.cs:5
  • `DWMThreadHelper` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (DWMThreadAdress, DWM_IsSuspended, DWMThreadId, XAMLThreadAdress, XAML_IsSuspended, XAMLThreadId; e.g. `DWMThreadAdress` at line 67). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Core.Tools/DWMThreadHelper.cs:8
  • `CoreTools` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (LanguageEngine; e.g. `LanguageEngine` at line 88). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — REDACTED:26
  • `TelemetryHandler` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_openSearchUsername, _openSearchPassword, _credentialsWarningLogged, TestSendAsyncOverride, _platformInfo; e.g. `_openSearchUsername` at line 44). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Interface.Telemetry/TelemetryHandler.cs:34
  • `StartMenuShortcutsDatabase` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_testUserPrograms, _cachedRoots, _testCommonPrograms; e.g. `_testUserPrograms` at line 46). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs:9
  • `WinGet` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (NO_PACKAGES_HAVE_BEEN_LOADED; e.g. `NO_PACKAGES_HAVE_BEEN_LOADED` at line 357). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.PackageEngine.Managers.WinGet/WinGet.cs:22
  • `WinGetIconsHelper` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (__msstore_package_manifests; e.g. `__msstore_package_manifests` at line 55). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetIconsHelper.cs:15
  • `BaseNuGet` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (Manifests; e.g. `Manifests` at line 255). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs:20
  • `FakeDataEnvironment` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (Current; e.g. `Current` at line 96). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Tui/FakeData/FakeDataEnvironment.cs:15
  • `TuiBootstrapper` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_started; e.g. `_started` at line 35). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Tui/Infrastructure/TuiBootstrapper.cs:23
  • `TuiBundleService` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_hasUnsavedChanges; e.g. `_hasUnsavedChanges` at line 38). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Tui/Infrastructure/TuiBundleService.cs:26
  • `TuiEngine` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_managers; e.g. `_managers` at line 20). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Tui/Infrastructure/TuiEngine.cs:15
  • `TuiMaintenanceScheduler` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_started, _updatesWereLoaded, _timer, _pendingInstallSince, _pendingCheckSince; e.g. `_started` at line 40). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Tui/Infrastructure/TuiMaintenance.cs:17
  • `TuiOperationRegistry` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_ops, _cancelNotified, _batch, _batchVersion, _resetVersion; e.g. `_ops` at line 81). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt. — src/UniGetUI.Tui/Infrastructure/TuiOperationRegistry.cs:22

What to do

  • Keep singletons stateless or back their state with thread-safe types (Concurrent*/Immutable*); otherwise concurrent callers race.
  • A `static` field is one slot for the whole process, however its type is created: back it with a thread-safe type (ConcurrentDictionary, Interlocked), take a lock around every write, or move it into a registered singleton that does.
AX3 · Project dependency cycles10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether the project-reference graph is acyclic (cycles block independent build/deploy and signal eroding boundaries).

Method: Project reference cycles via elementary-DFS over real .csproj references, using the engine shared with D5/D7; cyclic versus acyclic. Exhaustive, deterministic.

  • The namespaces Devolutions.AgentSkills ↔ Skills depend on each other. The lightest dependency in the cycle is Devolutions.AgentSkills → Skills (Devolutions.AgentSkills.SkillsManagerOptions → Skills.DownloadedSource, 2 type pair(s)); cut that one first, e.g. by moving the shared type to a namespace both can use or inverting it behind an interface. — src/UniGetUI.AgentSkills/Api/SkillsManager.cs:1
  • The namespaces UniGetUI.PackageEngine.AgentBroker.PolicyWriteElevation ↔ UniGetUI.PackageEngine.AgentBroker.PolicyWriteElevation.Interop depend on each other. The lightest dependency in the cycle is UniGetUI.PackageEngine.AgentBroker.PolicyWriteElevation.Interop → UniGetUI.PackageEngine.AgentBroker.PolicyWriteElevation (UniGetUI.PackageEngine.AgentBroker.PolicyWriteElevation.Interop.WindowsAuthenticodeTrustVerifier → UniGetUI.PackageEngine.AgentBroker.PolicyWriteElevation.IPolicyElevationTrustVerifier, 3 type pair(s)); cut that one first, e.g. by moving the shared type to a namespace both can use or inverting it behind an interface. — src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/Interop/WindowsAuthenticodeTrustVerifier.cs:37
  • The namespaces UniGetUI.Avalonia.Infrastructure ↔ UniGetUI.Avalonia.Models ↔ UniGetUI.Avalonia.ViewModels ↔ UniGetUI.Avalonia.ViewModels.Controls ↔ UniGetUI.Avalonia.ViewModels.Pages ↔ UniGetUI.Avalonia.ViewModels.Pages.LogPages ↔ UniGetUI.Avalonia.ViewModels.Pages.SettingsPages ↔ UniGetUI.Avalonia.ViewModels.Pages.SettingsPages.PolicyEditor ↔ UniGetUI.Avalonia.Views ↔ UniGetUI.Avalonia.Views.Controls ↔ UniGetUI.Avalonia.Views.Controls.Settings ↔ UniGetUI.Avalonia.Views.DialogPages ↔ UniGetUI.Avalonia.Views.Pages ↔ UniGetUI.Avalonia.Views.Pages.LogPages ↔ UniGetUI.Avalonia.Views.Pages.SettingsPages ↔ UniGetUI.Avalonia.Views.Pages.SettingsPages.PolicyEditor ↔ UniGetUI.Interface ↔ UniGetUI.Interface.Telemetry ↔ UniGetUI.PackageEngine.AgentBroker ↔ UniGetUI.PackageEngine.Classes.Manager ↔ UniGetUI.PackageEngine.Classes.Manager.Classes ↔ UniGetUI.PackageEngine.Interfaces ↔ UniGetUI.PackageEngine.Interfaces.ManagerProviders ↔ UniGetUI.PackageEngine.ManagerClasses.Classes ↔ UniGetUI.PackageEngine.ManagerClasses.Manager ↔ UniGetUI.PackageEngine.Operations ↔ UniGetUI.PackageEngine.PackageClasses ↔ UniGetUI.PackageEngine.PackageLoader depend on each other. The lightest dependency in the cycle is UniGetUI.Avalonia.Infrastructure → UniGetUI.Interface.Telemetry (UniGetUI.Avalonia.Infrastructure.AvaloniaPackageOperationHelper → UniGetUI.Interface.Telemetry.TEL_InstallReferral, 1 type pair(s)); cut that one first, e.g. by moving the shared type to a namespace both can use or inverting it behind an interface. — src/UniGetUI.Avalonia/Infrastructure/AvaloniaPackageOperationHelper.cs:14
  • The namespaces UniGetUI.Tui.Infrastructure ↔ UniGetUI.Tui.Views.Controls depend on each other. The lightest dependency in the cycle is UniGetUI.Tui.Infrastructure → UniGetUI.Tui.Views.Controls (UniGetUI.Tui.Infrastructure.TuiChrome → UniGetUI.Tui.Views.Controls.TuiPanel, 1 type pair(s)); cut that one first, e.g. by moving the shared type to a namespace both can use or inverting it behind an interface. — src/UniGetUI.Tui/Infrastructure/TuiChrome.cs:4
  • The namespaces UniGetUI.Tui.Views.Dialogs ↔ UniGetUI.Tui.Views.Pages depend on each other. The lightest dependency in the cycle is UniGetUI.Tui.Views.Dialogs → UniGetUI.Tui.Views.Pages (UniGetUI.Tui.Views.Dialogs.SearchOptionsDialog → UniGetUI.Tui.Views.Pages.PackageListPage, 1 type pair(s)); cut that one first, e.g. by moving the shared type to a namespace both can use or inverting it behind an interface. — src/UniGetUI.Tui/Views/Dialogs/PackageListDialogs.cs:3

What to do

  • Break namespace cycles inside a project by moving the shared type to a namespace both sides can use, or by inverting the back edge behind an interface.
AX5 · Architecture & structure10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether the codebase has a recognisable, scale-appropriate structure (a named architectural style, or modular enough for its size) rather than being an ad-hoc ball of mud.

Method: Roslyn plus csproj analysis: architecture style detection (DDD, clean, vertical-slice, CQRS) and structure fitness for repo size. Deterministic.

AX6 · Interface segregation9.6 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether interfaces stay focused rather than fat — the Interface-Segregation principle (SOLID 'I').

Method: Roslyn scan: public interface declared-member counts (accessors fold into their property/event); fat-interface threshold (over 15 declared members) flagged per type. Each finding also reports the distinct-OPERATION count — members counted by name, so an overload group counts once — which decides whether it states the caller-side ISP harm or the implementer-side burden of an overload set. TypeScript: exported interfaces that declare behaviour, counted over their REQUIRED operations (method signatures and function-typed properties with no `?`, once per signature) — data-shape interfaces and ambient .d.ts declarations are outside the population; JavaScript declares no interfaces and is not applicable. Deterministic, type-level.

  • `IPackage` declares 40 members: `Details`, `Tag`, `IsChecked`, `Name`, `Id`, `VersionString`, `HasConcreteVersion`, `InstalledVersionIsUnverified`, `RequiresReinstallToUpdate`, `NormalizedVersion`, `NormalizedNewVersion`, `Source`, `Manager`, `NewVersionString`, `IsUpgradable`, `OverridenOptions`, `AutomationName`, `GetHash`, `GetVersionedHash`, `Equals`, `IsEquivalentTo`, `GetIconId`, `GetIconUrl`, `GetIconUrlIfAny`, `GetScreenshots`, `AddToIgnoredUpdatesAsync`, `RemoveFromIgnoredUpdatesAsync`, `HasUpdatesIgnoredAsync`, `GetIgnoredUpdatesVersionAsync`, `GetInstalledPackages`, `GetAvailablePackage`, `GetUpgradablePackage`, `SetTag`, `NewerVersionIsInstalled`, `GetInstallerFileName`, `IsUpdateMinor`, `IsUpdateMajor`, `GetInstallOptions`, `AsSerializableAsync`, `AsSerializable_Incompatible`. Counted as the author wrote them — a property is ONE member and its get/set accessors are not counted separately, and an event counts once. A wide interface forces every implementer and caller to depend on methods they don't use (the Interface-Segregation 'I' in SOLID). Split it into focused role-interfaces. — src/UniGetUI.PackageEngine.Interfaces/IPackage.cs:10
  • `IPackageDetails` declares 20 members: `Package`, `IsPopulated`, `Description`, `Publisher`, `Author`, `HomepageUrl`, `License`, `LicenseUrl`, `Version`, `InstallerUrl`, `InstallerHash`, `InstallerType`, `InstallerSize`, `ManifestUrl`, `UpdateDate`, `ReleaseNotes`, `ReleaseNotesUrl`, `Tags`, `Load`, `Dependencies`. Counted as the author wrote them — a property is ONE member and its get/set accessors are not counted separately, and an event counts once. A wide interface forces every implementer and caller to depend on methods they don't use (the Interface-Segregation 'I' in SOLID). Split it into focused role-interfaces. — src/UniGetUI.PackageEngine.Interfaces/IPackageDetails.cs:3
  • `IPackageManager` declares 39 members: `Properties`, `Capabilities`, `Status`, `Id`, `Name`, `DisplayName`, `DefaultSource`, `TaskLogger`, `SourcesHelper`, `DetailsHelper`, `OperationHelper`, `Dependencies`, `OutputEncoding`, `InstallerUrlFollowsPackageVersion`, `CommandLineIsShellInterpreted`, `IdentifiersAreQuotedOnCommandLine`, `CompareVersions`, `CanUpdateToExactVersion`, `ResolveSkippedMajorUpdate`, `Initialize`, `IsEnabled`, `IsReady`, `IsInitializing`, `FindPackages`, `FindPackages`, `GetHealthRecord`, `ExpectsInstalledPackages`, `GetMaintenanceActions`, `GetAvailableUpdates`, `LastUpdatesListingFailed`, `LastInstalledListingFailed`, `GetInstalledPackages`, `InstalledPackagesGeneration`, `InvalidateInstalledPackages`, `RefreshPackageIndexes`, `AttemptFastRepair`, `FindCandidateExecutableFiles`, `GetExecutableFile`, `HasExecutable`. Counted as the author wrote them — a property is ONE member and its get/set accessors are not counted separately, and an event counts once. Those 39 declarations carry 38 distinct name(s), so part of the width is overloading rather than separate responsibilities — but 38 operations clears the >15 bar on its own, so the row is about responsibilities, not signatures. A wide interface forces every implementer and caller to depend on methods they don't use (the Interface-Segregation 'I' in SOLID). Split it into focused role-interfaces. — src/UniGetUI.PackageEngine.Interfaces/IPackageManager.cs:11

What to do

  • Split fat interfaces into focused role-interfaces so clients depend only on what they use.
AX8 · Test isolation10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether production projects stay free of references to test projects — tests may depend on production, never the reverse.

Method: Csproj graph: each production project checked for references to test projects (identified by test-framework presence, not name). Zero violations is clean. Deterministic.

C1 · Data Protection2.0 / 10Critical✓ Tool-verified

Other · Security — Whether sensitive data is encrypted at rest and in transit and keys are vaulted.

Method: Roslyn plus filesystem scan: encryption presence (EF ColumnEncryption, key-vault references, HTTPS enforcement) and key-derivation KDF detection. Deterministic.

  • No data-protection or encryption usage (ASP.NET Data Protection, AES, column encryption, PBKDF2) was found — sensitive data at rest may be unprotected. If TDE/KMS/vault is delegated to infrastructure, ignore.

What to do

  • Encrypt sensitive data at rest (ASP.NET Core Data Protection / column encryption) and manage keys in a vault. Skip if delegated to infra (Postgres TDE, KMS, etc.).
  • Enforce HTTPS (UseHttpsRedirection / RequireHttpsMetadata) so data in transit is always encrypted.
C2 · Access Controls7.0 / 10Strong✓ Tool-verified

Other · Security — Whether access is authorized by default — a framework authorization attribute/decorator or policy, or imperative guard methods (throw-on-violation) called from handlers.

Method: Roslyn scan: [Authorize] usage and authorization policies, plus imperative throw-on-violation guard methods detected via syntax. Deterministic.

  • Authorization IS enforced here (by imperative guard methods that throw on violation) — this is NOT a claim that the code is unprotected. What's missing is a NAMED rule set: the guards encode the access rules inline, so the rules can't be listed, reviewed or tested apart from the call sites that apply them. Recommendation, not a defect.

What to do

  • Name the access rules — give each one a named predicate/policy object your guards consult, so the rule set can be reviewed and unit-tested independently of the call sites that enforce it.
C4 · Data Retention7.5 / 10Strong✓ Tool-verified

Other · Security — Whether data has a defined lifetime — retention periods, TTLs, cleanup jobs (storage limitation).

Method: Roslyn scan: retention/TTL configuration presence in schema; CascadeDelete detected but not scored as retention control. Deterministic, gated by PII presence.

  • A retention mechanism is present, but the data-lifecycle is not yet complete — missing: a scheduled purge / cleanup job (PurgeOlderThan / CleanupJob).

What to do

  • Complete the data-lifecycle story: an expiry limit (a declared maximum age for the stored data — a retention-age setting, or a store-level TTL where your storage offers one), a scheduled purge/cleanup job that enforces it, and a documented retention period covering the personal data.
GD1 · Unfinished & placeholder code9.9 / 10Exemplary✓ Tool-verified

Other · Code Health — Unreviewed-generation residue: shipped members still throwing NotImplementedException, and placeholder string literals left in non-test, non-generated code. Scored as a quality signature, never as a claim about authorship.

Method: Roslyn syntax scan: NotImplementedException throws and placeholder string literals in non-test, non-generated shipped code. Deterministic, code-shape signature.

  • A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface. (×40) — src/UniGetUI.PackageEngine.Managers.Homebrew/Helpers/HomebrewPkgDetailsHelper.cs:99, src/UniGetUI.PackageEngine.Managers.Homebrew/Helpers/HomebrewPkgDetailsHelper.cs:102, src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:111, …

What to do

  • Finish or delete NotImplementedException stubs and replace placeholder literals before shipping.
IC1 · Incompleteness & stubs5.2 / 10Adequate✓ Tool-verified

Other · Code Health — Unfinished work detected by code SHAPE, not keywords: members that only throw a "not implemented" exception, methods that take inputs and return a constant, async methods that never await, dead `if (false)` / `#if false` branches, and skeleton types most of whose members are holes. A real, objective slice of technical debt.

Method: Roslyn syntax scan: incompleteness by code shape (constant-returning methods, async-never-await, #if false branches, guards that return what the code already falls through to, tests an earlier guard already decided, comparisons against NaN, skeleton types), not keyword-gated. Deterministic, code-shape heuristic.

  • `GetParameters` is a shipped member whose body only throws — and it is REACHED: src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:192 references it. This is not dead surface that can be deleted — anything taking that path throws at runtime. Implement the member, or remove the code that reaches it. — src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:194
  • `ConfirmAddSource` is declared `async` but never awaits anything, so it runs synchronously while pretending to be asynchronous. Drop `async` or do the real async work. — src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/SourceManagerCardViewModel.cs:109
  • The first 2 statements of the `if` and of the `else` are identical, so they run on both paths regardless of the condition. Lift them above the `if` — leaving them duplicated inside makes the branches read as though they handled this differently. — src/UniGetUI.Avalonia/Views/DialogPages/PackageDetailsWindow.axaml.cs:1033
  • `GetIcon_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface. (×11) — src/UniGetUI.PackageEngine.Managers.Apt/Helpers/AptPkgDetailsHelper.cs:119, src/UniGetUI.PackageEngine.Managers.Cargo/Helpers/CargoPkgDetailsHelper.cs:74, src/UniGetUI.PackageEngine.Managers.Dnf/Helpers/DnfPkgDetailsHelper.cs:102, …
  • `GetScreenshots_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface. (×10) — src/UniGetUI.PackageEngine.Managers.Apt/Helpers/AptPkgDetailsHelper.cs:122, src/UniGetUI.PackageEngine.Managers.Cargo/Helpers/CargoPkgDetailsHelper.cs:79, src/UniGetUI.PackageEngine.Managers.Dnf/Helpers/DnfPkgDetailsHelper.cs:105, …
  • `VcpkgPkgDetailsHelper` has 3 unfinished members out of 5 declared members (methods, properties, indexers and events, whether or not each carries a body) — a scaffolded type that was never implemented. — src/UniGetUI.PackageEngine.Managers.Vcpkg/Helpers/VcpkgPkgDetailsHelper.cs:13
  • `GetInstallableVersions_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface. — src/UniGetUI.PackageEngine.Managers.Vcpkg/Helpers/VcpkgPkgDetailsHelper.cs:123
  • `VcpkgSourceHelper` has 4 unfinished members out of 5 declared members (methods, properties, indexers and events, whether or not each carries a body) — a scaffolded type that was never implemented. — src/UniGetUI.PackageEngine.Managers.Vcpkg/Helpers/VcpkgSourceHelper.cs:8
  • `GetAddSourceParameters` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface. — src/UniGetUI.PackageEngine.Managers.Vcpkg/Helpers/VcpkgSourceHelper.cs:13
  • `GetRemoveSourceParameters` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface. — src/UniGetUI.PackageEngine.Managers.Vcpkg/Helpers/VcpkgSourceHelper.cs:16
  • `_getAddSourceOperationVeredict` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface. — src/UniGetUI.PackageEngine.Managers.Vcpkg/Helpers/VcpkgSourceHelper.cs:19
  • `_getRemoveSourceOperationVeredict` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface. — src/UniGetUI.PackageEngine.Managers.Vcpkg/Helpers/VcpkgSourceHelper.cs:25
  • `IsWinGetManager` looks like it should compute a result but its body just returns a constant — a placeholder return that was never filled in. (×2) — src/UniGetUI.PackageEngine.Operations/PackageOperations.cs:1451, src/UniGetUI.PackageEngine.Operations/SourceOperations.cs:154
  • `FindPackages` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface. (×2) — src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:111, src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:114
  • `GetAvailableUpdates` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface. — src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:125
  • `GetInstalledPackages` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface. — src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:127
  • `Initialize` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface. — src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:130
  • `IsEnabled` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface. — src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:132
  • `IsReady` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface. — src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:134

What to do

  • Finish or delete the unfinished stubs (NotImplementedException / empty / constant-returning bodies) — they are dead surface that looks live.
  • Clear the softer debt: remove commented-out code and dead branches, re-enable or delete skipped tests, and replace blanket warning suppressions with targeted ones.
M1 · Documentation (README)7.4 / 10Strong✓ Tool-verified

Maturity · Maturity — Whether the repository and its projects have a README, and whether it is substantive.

Method: Filesystem scan: README presence, word count, and headings for depth; git history for staleness. Exhaustive across root and project dirs, deterministic.

What to do

  • Add an 'Architecture' / 'How it works' section to the root README — the high-level shape.
  • Describe the projects a newcomer cannot place from the root README: 50 of 52 have no README of their own, in their folder or in their family's project (`src/UniGetUI.Avalonia`, `src/UniGetUI.CliLauncher`, `src/ExternalLibraries.Clipboard`, `src/ExternalLibraries.FilePickers`, `src/WindowsPackageManager.Interop` and 45 more).
M2 · Architecture documentation2.0 / 10Critical✓ Tool-verified

Maturity · Maturity — Whether key decisions (ADRs) and the high-level shape (C4/diagrams) are written down.

Method: Filesystem scan: ADR folder/naming conventions or content, plus Mermaid/PlantUML/C4/architecture.md discovery. Exhaustive, deterministic.

  • No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.

What to do

  • Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
M3 · Folder & project structure10.0 / 10Exemplary✓ Tool-verified

Maturity · Maturity — Whether the repository is organised deliberately: production code and tests are set apart in a way its ecosystem or the repository itself declares.

Method: Filesystem scan: src/test folder separation and namespace-prefix consistency (majority RootNamespace agreement). Exhaustive across projects, deterministic.

M4 · Documentation accuracy10.0 / 10Exemplary○ Nothing flagged

Maturity · Maturity — Whether the project's current-state documentation describes the code that exists.

Method: Every current-state document's checkable claims looked up in the tree (links, versions, and artefact counts an order of magnitude off), plus two README checks: an advertised infrastructure product with no footprint, and a module the CHANGELOG records as removed. Deterministic, no model. Advisory.

P1 · CI/CD gates10.0 / 10Exemplary○ Nothing flagged

Readiness · Readiness — Whether an automated pipeline builds and tests every change.

Method: Filesystem scan: CI workflow files (.github/workflows, .gitlab-ci.yml, etc.) for build and test stages. Exhaustive, deterministic.

P10 · Library API & versioning10.0 / 10Exemplary○ Nothing flagged

Readiness · Readiness — For a library: a deliberate (small) public API surface and explicit semantic versioning so consumers can depend on it safely.

Method: Roslyn scan: public API surface area and semantic-versioning markers (SemVer attributes, changelog entries) for libraries; off .NET, a library is the ecosystem's publication act (an npm package that is not private and names an entry point, a PyPI distribution with a build system, a Rust library crate, a Maven/Gradle module that publishes, a Go module with no package main, a gemspec, a Composer library, a SwiftPM library product, a pub.dev or Hex package), its surface is the share of types the language's code model records as public (Rust, Swift, Java, Kotlin, Go, Dart; not measured where the model records no type visibility or, as in TypeScript, only module-level export), and its version is read from the manifest, a semver CHANGELOG, release tooling or semver git tags. Exhaustive, deterministic.

P2 · Observability6.8 / 10Adequate✓ Tool-verified

Readiness · Readiness — Whether the code is diagnosable in production — structured logging, tracing/metrics, health checks.

Method: Filesystem/Roslyn scan: structured-logging frameworks (Serilog, NLog), OpenTelemetry, and health-check endpoint patterns. Exhaustive, deterministic.

  • Only 36/38 service-like projects use logging (pure contract/DTO projects are excluded — they have nothing to log). Of those 38, 2 ship a process this repository operates; the rest are libraries their consumer hosts, where the logging decision belongs to the host.
  • `src/UniGetUI.Avalonia/CrashHandler.cs` reports through `Console.Write…` at line 270 although other files in its project log through a logger. Console lines carry no level, category or structured properties and never reach the log pipeline or its exporters. — src/UniGetUI.Avalonia/CrashHandler.cs:270

What to do

  • Extend structured logging across the projects you operate, and give the library ones a diagnostics seam instead — an `EventSource`/`ActivitySource` the host can subscribe to, or an optional logger on your options object — rather than taking a logging dependency on your consumers' behalf.
  • Replace `Console.Write…` in service code with the project's injected `ILogger<T>` (message templates with named properties), so delivery outcomes and failures reach the log pipeline with a level and a category.
  • Consider OpenTelemetry tracing/metrics and a health-check endpoint for operability.
P3 · Security & performance tooling6.0 / 10Adequate✓ Tool-verified

Readiness · Readiness — Whether SAST, secret/dependency scanning and performance benchmarking are wired in (presence, not runtime).

Method: Filesystem scan: SAST configuration, dependency-update automation, secret scanning, and a benchmark harness or benchmark step — in this repository's own ecosystem. Exhaustive, deterministic.

  • `REDACTED` run(s) a static-analysis scan, but no workflow that runs one is triggered by a pull request (or a merge queue, or an unfiltered push) — the scan fires on a schedule or a manual dispatch only. A vulnerable change therefore merges clean and is reported on the next scheduled run, by which time it is on the default branch and the only remedy is a follow-up fix. Add the pull-request trigger to the workflow that runs the scan so the finding arrives before the merge rather than after it.

What to do

  • Trigger your SAST workflow on pull requests — a scan that only runs on a cron reports history, it does not gate.
  • Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
P4 · Deployment & Rollback7.0 / 10Strong✓ Tool-verified

Readiness · Readiness — Whether releases are automated and safely reversible (probes, rolling updates, approval gates) — from manifests/pipeline files, not the live environment.

Method: Filesystem scan: deployment manifests/IaC (K8s YAML, Helm, Terraform) for rolling updates, probes, approval gates, migration hooks. Exhaustive, deterministic.

P5 · DR & Backup4.0 / 10Weak✓ Tool-verified

Readiness · Readiness — Whether disaster recovery is planned and codified — backups, geo-recovery, RTO/RPO, persistence guarantees — from IaC + container manifests + docs, never the live cloud.

Method: Filesystem scan: disaster recovery, backup, geo-recovery, RTO/RPO, persistence guarantees from IaC, manifests, and docs. Exhaustive, deterministic, never a live environment.

What to do

  • Document RTO/RPO and a tested restore procedure (a backup config alone isn't disaster recovery).
P6 · Release Hygiene5.0 / 10Adequate✓ Tool-verified

Readiness · Readiness — Whether releases are traceable — a maintained changelog and explicit version stamping.

Method: Filesystem scan: changelog file presence and version tags in csproj or git tags. Exhaustive, deterministic.

  • No CHANGELOG/HISTORY/RELEASES file — what shipped when isn't easy to reconstruct for support or audit. (Versioning/tagging makes releases traceable, but a changelog records the what.)

What to do

  • Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release.
P7 · Outbound HTTP resilience3.0 / 10Weak✓ Tool-verified

Readiness · Readiness — Whether outbound HTTP calls are wrapped in resilience (retry/timeout/circuit-breaker) so a failing dependency doesn't cascade.

Method: Source scan: outbound HTTP clients and what bounds them — resilience handlers (Polly, AddStandardResilienceHandler) on .NET; on Go, the JVM, Python, JavaScript/TypeScript, Ruby, PHP, Rust, Elixir, Swift, Dart and Erlang, a timeout, deadline, retry or breaker beside each call, or a process-wide client default (a framework-wide deadline such as Drupal core's, Laravel's or actix's awc counts). Exhaustive, deterministic.

  • `new(new SocketsHttpHandler { AllowAutoRedirect = true, MaxAutomaticRedirectio...` builds an outbound HTTP client, and what is applied to it does not bound it. Its `Timeout` is set to `Timeout.InfiniteTimeSpan`, which removes HttpClient's own bound rather than setting one. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default). — src/UniGetUI.AgentSkills/Http.cs:44
  • `new HttpClient(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default). (×10) — src/UniGetUI.Avalonia/ViewModels/Controls/UserAvatarViewModel.cs:94, src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationViewModel.cs:167, src/UniGetUI.Avalonia/ViewModels/DialogPages/PackageDetailsViewModel.cs:326, …
  • `new(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default). (×14) — src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:676, src/UniGetUI.Core.IconStore/IconCacheEngine.cs:236, src/UniGetUI.Core.IconStore/IconDatabase.cs:75, …
  • `new(handler)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default). — REDACTED:529
  • `new HttpClient(CoreTools.GenericHttpClientParameters) { BaseAddress = GitHubA...` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default). — src/UniGetUI.Interface.IpcApi/GitHubApiClient.cs:18
  • `new HttpClient(handler) { BaseAddress = options.BaseAddress, Timeout = Timeou...` builds an outbound HTTP client, and what is applied to it does not bound it. Its `Timeout` is set to `Timeout.InfiniteTimeSpan`, which removes HttpClient's own bound rather than setting one. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default). — src/UniGetUI.Interface.IpcApi/IpcClient.cs:1565
  • `new HttpClient { BaseAddress = options.BaseAddress, Timeout = Timeout.Infinit...` builds an outbound HTTP client, and what is applied to it does not bound it. Its `Timeout` is set to `Timeout.InfiniteTimeSpan`, which removes HttpClient's own bound rather than setting one. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default). — src/UniGetUI.Interface.IpcApi/IpcClient.cs:1572

What to do

  • Add `AddStandardResilienceHandler()` (or a Polly policy and an explicit timeout) to each client registration flagged here, so a flaky dependency can't take the app down.
PF3 · Async & latency hygiene6.0 / 10Adequate✓ Tool-verified

Readiness · Performance — Whether asynchronous code stays responsive — it avoids sync-over-async blocking (a .NET .Wait()/.GetAwaiter().GetResult(), a time.sleep or blocking HTTP call inside a Python coroutine, a *Sync call inside an async JavaScript function, block_on inside a Rust async fn, runBlocking inside a Kotlin suspend function, block() inside a Reactor publisher) that stalls a thread or event loop and risks deadlock, and, where the code is a reusable library on .NET, awaits with ConfigureAwait(false) so it never captures and stalls its caller's context.

Method: Production-source scan: sync-over-async blocking counted everywhere — .Wait()/.GetAwaiter().GetResult() in .NET; off .NET, read from each language's code model, a blocking call inside an async function (Python, TS/JS, Rust, Kotlin, Swift, Dart) or inside a Java method returning a Reactor Mono/Flux or a Scala method returning a Future or effect — and, for a .NET library with ≥5 awaits, the share of awaits using ConfigureAwait(false). Deterministic, syntax/text detection.

  • 65 blocking call(s) on async work (.Wait()/.GetAwaiter().GetResult()) — these waste a thread and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one). (×34) — src/UniGetUI.Avalonia/Views/DialogPages/CrashReportWindow.axaml.cs:58, src/Shared/SharedPreUiCommandDispatcher.cs:265, src/Shared/SharedPreUiCommandDispatcher.cs:283, …
  • `ws.Wait()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one). — src/UniGetUI.AgentSkills.Cli/Notion.cs:182
  • `wsTask.Wait()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one). — src/UniGetUI.AgentSkills.Cli/Notion.cs:245
  • `.Wait()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one). — src/UniGetUI.Core.Data/CoreData.cs:517
  • `task.Wait()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one). (×2) — src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Helpers/BaseSourceHelper.cs:102, src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/PackageManager.cs:717

What to do

  • Make the call chain async end-to-end and await it — never block on a Task with .Wait()/.GetAwaiter().GetResult().
S1 · Web-Security Posture2.0 / 10Critical✓ Tool-verified

Other · Security — Transport security, security headers, secure cookies, input validation, middleware order and crypto hygiene (presence, not runtime).

Method: Roslyn plus filesystem scan: HSTS/security headers, secure cookies, input validation, middleware order, weak crypto (MD5/SHA1/DES); HTTPS-metadata context-aware. On a repository with no .NET source it reads JavaScript/TypeScript, Dart, Ruby, Scala, Rust or Elixir source itself (test, vendored, generated and minified paths not) for the arms that hold whether or not the code serves HTTP: a weak hash or cipher, key material fixed in the source, a TLS client that accepts any certificate, and (JavaScript/TypeScript, Ruby, Scala, Rust and Elixir) an obsolete TLS version; the server controls are not assessed there, and a Dart, Ruby, Scala, Rust or Elixir repository that serves no HTTP of its own is N/A on them. Deterministic.

  • `ServerCertificateCustomValidationCallback` is assigned a callback that returns `true` unconditionally, so every TLS peer certificate is accepted — including one an attacker presents. Chain, expiry, revocation and hostname are all skipped, so an attacker on the network path can present any certificate and read or rewrite the traffic — the connection is encrypted to the attacker, not to the intended host. Delete the override and let the platform validate. If a specific self-signed or internally-issued certificate genuinely has to be trusted, pin THAT one — compare the presented certificate's public key or thumbprint against the expected value and return `false` for everything else — and scope it to the single handler that talks to that host rather than to the whole process. If the override exists only to get past a development certificate, gate it on a build configuration or an explicit opt-in setting so it cannot ship. — src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:2033
  • None of the 11 security response headers the OWASP Secure Headers Project recommends (Content-Security-Policy, Strict-Transport-Security, X-Content-Type-Options, X-Frame-Options, …) is configured — defense in depth, even when a reverse proxy could set them. (−2.0 on this card.)
  • This web host's pipeline is composed here and adds no security response header (Content-Security-Policy, Strict-Transport-Security, X-Content-Type-Options, a frame policy) to what it serves. — REDACTED:76
  • No UseHttpsRedirection/UseHsts and no reverse-proxy signal — transport security is unverified at the app layer. (−2.0 on this card.)
  • This web host's pipeline is composed here with no UseHttpsRedirection/UseHsts, and nothing says a reverse proxy terminates TLS in front of it. — REDACTED:76

What to do

  • Stop accepting every TLS certificate: remove the always-true validation callback so the platform verifies the chain, hostname and expiry. If one self-signed certificate must be trusted, pin it by public key or thumbprint on the single handler that needs it and reject all others — never process-wide.
  • Add security response headers (Content-Security-Policy first, then Strict-Transport-Security, X-Content-Type-Options and a frame policy) — defense in depth, even when a reverse proxy could set them.
  • Enforce HTTPS at the app layer (UseHttpsRedirection / UseHsts) — only skip this if a reverse proxy demonstrably terminates TLS.
X1 · Async correctness5.3 / 10Adequate✓ Tool-verified

Other · Code Health — Whether the code avoids sync-over-async (deadlock-prone blocking on tasks) and async void.

Method: Roslyn syntax scan: async methods scanned for .Wait()/.GetAwaiter().GetResult() and async-void outside event handlers. Deterministic, hard fact per invocation.

  • `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained. (×27) — src/UniGetUI.Avalonia/App.axaml.cs:151, src/UniGetUI.Avalonia/ViewModels/DialogPages/ManageIgnoredUpdatesViewModel.cs:260, src/UniGetUI.Avalonia/ViewModels/MainWindowViewModel.cs:1207, …
  • `File.ReadAllText` blocks the thread on I/O while `File.ReadAllTextAsync` exists to wait without one — inside a method that is already `async`, await the twin. — src/UniGetUI.Avalonia/App.axaml.cs:299
  • `.Wait(…)` blocks this thread until the task completes or the bound expires — sync-over-async: it can deadlock under a synchronization context and it parks a thread while it waits. `await` the task (with `.WaitAsync(timeout, token)` where the bound matters). — src/UniGetUI.Avalonia/CrashHandler.cs:197
  • Reading `.Result` of a task that has not completed blocks this thread until it does — the same block as `.Wait()`: under a synchronization context (Blazor, a UI thread, classic ASP.NET) it deadlocks, and on the thread pool it parks a thread for as long as the work runs. `await` the task instead (make the caller `async`); where a synchronous entry point must stay, keep the block in ONE documented bridge with a timeout. (×3) — src/UniGetUI.Avalonia/CrashHandler.cs:199, src/UniGetUI.Avalonia/ViewModels/DialogPages/CatalogEditorViewModel.cs:125, src/UniGetUI.Avalonia/ViewModels/Pages/GitRepositoriesViewModel.cs:801
  • Blocking on a Task with `.Wait()`/`.GetAwaiter().GetResult()` can deadlock (and wastes a thread). Prefer awaiting it: make the caller `async` and `await` instead. Where a synchronous entry point must stay — a public sync API you cannot break, or a process entry point that must not return until the work finishes — the block belongs in ONE documented bridge and never inside code that is already async; and where it already is that bridge, give the wait a TIMEOUT so a hung task fails the call instead of hanging the process. (×8) — src/UniGetUI.Avalonia/Views/DialogPages/CrashReportWindow.axaml.cs:56, src/Shared/SharedPreUiCommandDispatcher.cs:265, src/Shared/SharedPreUiCommandDispatcher.cs:283, …

What to do

  • async void method: ResumeStartupAfterMacOSEnvironment
X12 · Unreachable branch10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether any branch is dead by construction — a switch arm whose label can never equal a case-normalised subject, or an `else if` whose predicate the arm above has already swallowed.

Method: Roslyn syntax + semantics: switch labels compared against the subject's own case normaliser, and if/else-if chains checked for a literal an earlier arm's containment test already swallows. Deterministic, provable per finding. Advisory.

X13 · Undrained process stream5.3 / 10Adequate✓ Tool-verified

Other · Code Health — Whether a child process that has BOTH standard streams redirected drains both — reading one to the end while the other is never read deadlocks once the child fills the unread pipe.

Method: Roslyn syntax + semantics: ProcessStartInfo launches with both streams redirected, checked for a drain of each stream across the enclosing type. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `spawn` imported from `child_process` whose stdout and stderr are both pipes (no options, no `stdio`, or `stdio` of `'pipe'`), bound to a local that never leaves its scope, where exactly one of the two streams is read, the other never, and the child’s `close`/`exit` (or the read stream’s end) is awaited; a shell redirect in the call’s arguments or a `kill` of the child suppresses it. The same rule reads Python’s `subprocess.Popen`, Dart’s `Process.start`, Ruby’s `Open3.popen3`, and Scala’s JDK process starts (`new ProcessBuilder(…).start()` with no `redirectErrorStream`/`redirectError`/`redirectOutput`/`inheritIO`, `Runtime.getRuntime.exec`) where one of `getInputStream`/`getErrorStream` is read and the other never while `waitFor()` is called or the read stream is read to its end. Deterministic, provable per finding. Advisory.

  • `RedirectStandardOutput` is set here, but `StandardOutput` is not being read when the code waits for the child to exit — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardOutput pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginOutputReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume. (×4) — src/UniGetUI.PackageEngine.Managers.Homebrew/Homebrew.cs:161, src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:82, src/UniGetUI.PackageEngine.Managers.Dotnet/DotNet.cs:194, …
  • `RedirectStandardError` is set here, but `StandardError` is not being read when `StandardOutput` is read to the end — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardError pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginErrorReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume. (×13) — src/UniGetUI.PackageEngine.Managers.Apt/Helpers/AptPkgDetailsHelper.cs:131, src/UniGetUI.PackageEngine.Managers.Bun/Bun.cs:271, src/UniGetUI.PackageEngine.Managers.Cargo/Cargo.cs:213, …
  • `RedirectStandardOutput` is set here, but `StandardOutput` is not being read when `StandardError` is read to the end — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardOutput pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginOutputReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume. (×2) — src/UniGetUI.PackageEngine.Managers.Flatpak/Flatpak.cs:88, src/UniGetUI.PackageEngine.Managers.Snap/Snap.cs:86

What to do

  • Each finding names the span that makes the branch dead and the span it is dead because of. Confirm from the two, then delete the dead arm or fix the predicate that was meant to be reachable.
X16 · Unfloored truncation loop10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a loop that shortens a string until it fits a length budget has a floor — one with none grinds the value down to the empty string, or past it into a negative-length `Substring`.

Method: Roslyn syntax + semantics: while/do loops whose body's only effect on a string is to drop its last character, checked for whether anything — a direct comparison on the length, a body guard, a break — bounds that length below. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `while`/`do` loop whose body’s one assignment to a value is `x = x.slice(0, -1)` or `x = x.slice|substring|substr(0, x.length - 1)`, driven by a condition that reads `x.length` only as a term of a larger expression — never compared directly, never tested for truthiness, and with no other read of `x` — and whose body has no `break`, `return`, `throw` or `if` naming `x`. Deterministic, provable per finding. Advisory.

X18 · Disposal-pattern correctness6.3 / 10Adequate✓ Tool-verified

Other · Code Health — Whether a type's disposal matches what it OWNS — releasing what it created, leaving alone what it was handed, and not declaring a finalizer for state that has nothing unmanaged to finalize.

Method: Roslyn syntax + semantics: every assignment to a disposable field is read to decide whether the type CREATED the value or was handed it, and the type's disposal is checked against that answer — an injected interface it disposes, a value it constructed and never releases, a finalizer on a type holding nothing unmanaged, and a disposable local whose every reference is a plain member read. A value handed to a container that disposes its contents (a parent control's `Controls` collection, a component `IContainer`) is released by that container and is not reported; generated code is out of population. On a repository with no .NET source the same ownership questions are read in JavaScript/TypeScript off the engine’s own token stream (test, vendored, generated and minified paths not): a class declaring `dispose()`, `[Symbol.dispose]()` or `[Symbol.asyncDispose]()` that disposes a field it was handed through a constructor parameter typed as a repository interface or resolved by a dependency-injection container; that assigns a field only ever from `new X(…)` of a disposable class and neither releases it anywhere in the class nor names it in its disposal member or a method that member calls, nor hands it to anything else; and a `const`/`let` local built from literals only whose every reference opens a statement operating on a non-release member of it. A class is disposable when every repository declaration of its name declares or inherits a disposal member, or when it is a documented library disposable (`vscode` EventEmitter, CancellationTokenSource and Disposable; three.js geometries, materials, textures, render targets, renderers, controls and composers). The finalizer arm has no JavaScript counterpart: a class cannot declare one. Dart is read for the owned-and-never-released arm: a Flutter `State` (or a class declaring `dispose()`/`close()`) whose library-private field is written only with direct creations of a framework controller, `FocusNode`, `StreamController` or periodic `Timer` (or a `.listen(…)` into a field declared `StreamSubscription`), which nothing in the class or its library releases (`dispose`/`close`/`cancel`) and which is never handed on except as a named argument. Ruby is read for the owned-and-never-released arm and the abandoned-local arm: a class declaring an instance `close`, `dispose`, `shutdown`, `stop`, `disconnect` or `terminate` whose instance variable is written only with a blockless core descriptor creation (`File.open`/`new`, `Tempfile`, `Dir.open`, `IO.popen`, the `socket` and `openssl` socket classes) that no method of the class closes and that is never handed on (passed, returned, stored, exposed by `attr_reader`, delegated) — a class whose superclass or mixin lies outside the repository is not judged — and a blockless creation read through and dropped (`File.open(path).read`) or held in a local that is never closed, returned, passed or stored (a `&:read` block-pass, an `autoclose: false` borrow and a `fileno` hand-over are not abandonment). PHP is read for the same two arms: a class (not a trait, and not one using a trait) declaring an instance `close`, `dispose`, `shutdown`, `stop`, `disconnect` or `terminate` whose `private` property (or a `final` class's `protected` one) is written only with a direct core `fopen`, `tmpfile`, `popen`, `proc_open`, `fsockopen`, `stream_socket_client`/`server` or `opendir` that nothing in the class closes (`fclose`, `pclose`, `closedir`, `unset`, a reset to `null`) and that is never handed on, and a handle held in a function's local, or read through as the argument of a reader, that is never closed, returned, passed, captured or stored; a `php://` stream, `curl_init`, `SplFileObject`, `PDO` and a function the repository declares under the core name are not read. Deterministic, provable per finding. Advisory.

  • `_detailsLoad` is a `CancellationTokenSource` this type creates itself, and here (line 980) a new instance is written over it — but `LoadDetailsAsync` itself reads through `_detailsLoad` before replacing it, so it expects an instance to be there, and nothing earlier in `LoadDetailsAsync` disposes, closes, saves or hands on the instance being replaced. The assignment makes it unreachable while it still holds what it holds (a timer that keeps firing, a callback registered on a longer-lived token, a socket, a handle), and no later `Dispose` can reach it: the type's own disposal releases only the CURRENT instance. The cost accumulates once per overwrite. Release the previous instance first (`_detailsLoad?.Dispose();` before the assignment), or swap it out with `Interlocked.Exchange` and dispose what comes back. — src/UniGetUI.Avalonia/ViewModels/Pages/GitRepositoriesViewModel.cs:980
  • `GHAuthApiRunner` implements `IDisposable` — so it has told every caller it holds something worth releasing — and it constructs `_listener` itself (line 20), which makes that instance its own. But `_listener` is named in none of the methods the disposal search covered: `Dispose` (line 144) — that is `Dispose` plus every method `Dispose` calls BY NAME, so a release reached through an interface, a delegate or a base class is not followed and is worth checking before acting. On what was read, the type's disposal releases everything except the one thing it owns. A disposable the owner never disposes is held until finalization if its type has a finalizer, and forever if it does not — which for a synchronisation primitive, a timer, a stream or a handle means the resource accumulates once per instance for the life of the process. Release it in `Dispose` (`_listener?.Dispose();`), or, if it truly does not need releasing, drop `IDisposable` from the type so the claim and the behaviour agree. — src/UniGetUI.Avalonia/Infrastructure/GHAuthApiRunner.cs:20
  • `_location` is a `PolicyElevationLocationVerification` that `AuthenticatedBrokerServer` never creates — every assignment to it takes a constructor parameter — and this type disposes it here (line 231). The caller that hands it over at `new AuthenticatedBrokerServer(process, location)` (AuthenticatedBrokerTransport.cs line 217) releases the same value itself, so it kept ownership: this release is a second one, on a value that is still the caller's, and it ends the caller's instance while the caller may still be using it. Drop the call and leave the release to the caller that created the value — or, if this type is meant to own it, stop releasing it at the construction site so ownership is stated once. — src/UniGetUI.AgentPolicy.ElevatedHelper/AuthenticatedBrokerTransport.cs:231
  • `_process` is a `SafeProcessHandle` that `AuthenticatedBrokerServer` never creates — every assignment to it takes a constructor parameter — and this type disposes it here (line 232). The caller that hands it over at `new AuthenticatedBrokerServer(process, location)` (AuthenticatedBrokerTransport.cs line 217) releases the same value itself, so it kept ownership: this release is a second one, on a value that is still the caller's, and it ends the caller's instance while the caller may still be using it. Drop the call and leave the release to the caller that created the value — or, if this type is meant to own it, stop releasing it at the construction site so ownership is stated once. — src/UniGetUI.AgentPolicy.ElevatedHelper/AuthenticatedBrokerTransport.cs:232
  • `Host` is a `SafeProcessHandle` that `AuthenticatedHostContext` never creates — every assignment to it takes a constructor parameter — and this type disposes it here (line 401). The caller that hands it over at `new AuthenticatedHostContext( verification, host, expectation, trustVerifier,...` (Program.cs line 262) releases the same value itself, so it kept ownership: this release is a second one, on a value that is still the caller's, and it ends the caller's instance while the caller may still be using it. Drop the call and leave the release to the caller that created the value — or, if this type is meant to own it, stop releasing it at the construction site so ownership is stated once. — src/UniGetUI.AgentPolicy.ElevatedHelper/Program.cs:401
  • `writeLock` is a `SemaphoreSlim`, which implements `IDisposable`, and it is created here (line 222). Every use of it in `HandleAsync` reads a member through it — it is never returned, never stored, never handed to anything else, and never disposed — so this method both creates the value and is the last thing that can release it, and does not. Nothing announces the leak: the object holds its resource until finalization if its type has a finalizer, and until the process ends if it does not, so the cost accumulates once per CALL rather than showing up as a failure. Declare it with `using` (`using var writeLock = …;`), which releases it at the end of the scope on every path including a throw. — src/UniGetUI.PackageEngine.Managers.MacPkg/PkgHelperCommand.cs:222
  • `process` is a `Process`, which implements `IDisposable`, and it is created here (line 192). Every use of it in `_loadManagerExecutableFile` reads a member through it — it is never returned, never stored, never handed to anything else, and never disposed — so this method both creates the value and is the last thing that can release it, and does not. Nothing announces the leak: the object holds its resource until finalization if its type has a finalizer, and until the process ends if it does not, so the cost accumulates once per CALL rather than showing up as a failure. Declare it with `using` (`using var process = …;`), which releases it at the end of the scope on every path including a throw. — src/UniGetUI.PackageEngine.Managers.Dotnet/DotNet.cs:192
  • `process` is a `Process`, which implements `IDisposable`, and it is created here (line 212). Every use of it in `_loadManagerVersion` reads a member through it — it is never returned, never stored, never handed to anything else, and never disposed — so this method both creates the value and is the last thing that can release it, and does not. Nothing announces the leak: the object holds its resource until finalization if its type has a finalizer, and until the process ends if it does not, so the cost accumulates once per CALL rather than showing up as a failure. Declare it with `using` (`using var process = …;`), which releases it at the end of the scope on every path including a throw. — src/UniGetUI.PackageEngine.Managers.Dotnet/DotNet.cs:212

What to do

  • Each finding names the value and the span that decides who owns it — the `new` that created it, or the constructor parameter that handed it over. Confirm ownership from that span, then make the disposal match it: release what this type created, leave what it was injected with to whoever created THAT, and drop a finalizer whose type holds nothing unmanaged to release.
X19 · Unrestored process-global state10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a method that temporarily changes state belonging to the whole process — the working directory, an environment variable — puts it back on EVERY path: a restore reached only when nothing throws leaks the change to the rest of the process.

Method: Roslyn syntax + semantics: method bodies that write the process working directory or an environment variable and write it back in the same body, checked for whether that restore sits in a `finally`/`catch` or only on the straight-line path. On a repository with no .NET source the same rule reads production JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not): `process.chdir`, `process.env.NAME =`/`["NAME"] =` and `delete process.env.NAME`, and Deno’s `Deno.chdir`/`Deno.env.set`/`Deno.env.delete`, paired per function body (a nested function or arrow is its own body, and module top-level code is none), where the last write puts back a local the body captured from the same global or deletes a variable the first write set, with at least one statement between them; a write in a `catch`/`finally` of that body silences it. Deterministic, provable per finding. Advisory.

X2 · Cancellation propagation5.2 / 10Adequate✓ Tool-verified

Other · Code Health — Whether async methods accept a CancellationToken so work can be cancelled (adoption curve).

Method: Roslyn scan: every async method (excluding framework-fixed overrides/Blazor handlers) checked for CancellationToken parameter presence. Deterministic, adoption percentage. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same question: every named async function that itself makes a request an AbortSignal can cancel (global `fetch`, axios and its file-local instances, ky, ofetch) counts, and it is compliant when its parameters or body name a signal or it hands one of its own parameters to the request as options; signatures a framework fixes (JSX event handlers, route and lifecycle exports, request-first handlers, `override`, `'use server'` modules, TanStack `mutationFn`) are exempt unless they take a signal. Deterministic, adoption percentage.

  • Only 150/724 async methods accept a CancellationToken, so in-flight work can't be stopped early when the caller gives up — whatever ends it in your host (shutdown signal, timeout, abandoned request, user cancel). Thread a token through the call chain and honour it at each await and loop; where a method genuinely cannot be interrupted, omitting it is a deliberate choice — judge against your hosting model.
  • No CancellationToken parameter — this work can't be stopped early once started. (×33) — src/UniGetUI.Avalonia/App.axaml.cs:151, src/UniGetUI.Avalonia/App.axaml.cs:291, src/UniGetUI.Avalonia/Models/PackageCollections.cs:903, …
  • No CancellationToken parameter — the body observes an ambient token instead (a field or a context object), so the work does stop on cancellation, but a caller cannot cancel this call independently of the owner that created that token. (×6) — src/UniGetUI.Avalonia/Models/PackageCollections.cs:348, src/UniGetUI.Avalonia/Models/PackageCollections.cs:526, src/UniGetUI.Avalonia/Models/PackageCollections.cs:648, …

What to do

  • Thread a CancellationToken through async methods so work stops promptly on cancellation.
X20 · Mistyped argument guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether an argument guard throws the exception its own condition describes — a guard that rejects a value for being EMPTY and reports it as `ArgumentNullException` tells the caller a parameter was null when it provably was not.

Method: Roslyn syntax: `throw new ArgumentNullException(nameof(p))` statements controlled by an `if`, whose condition is read for a test that is true of a NON-null `p` — an emptiness test that dereferences it (`p.Count == 0`, `!p.Any()`) or a BCL predicate documented true of the empty value (`string.IsNullOrEmpty(p)`). Deterministic, provable per finding. Advisory.

X21 · Side-effecting pattern guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a `when` guard is free of side effects — a guard that increments a counter or assigns while deciding whether its arm matches applies that change during PATTERN MATCHING, on an arm that may not be selected, and skips it entirely when a short-circuit to its left answers first.

Method: Roslyn syntax: `when` guards on case labels and switch-expression arms, read for a mutation (`++`/`--`/assignment) sitting in a position the guard's own `&&`/`||`/`??`/`?:`/`?.` can skip. Deterministic, provable per finding. Advisory.

X22 · Contradicted release guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a method that TAKES a lock or semaphore and gives it back from a flag-guarded `finally` returns the value that flag implies — reporting success while the guard hands the primitive back admits a second caller the exclusion was there to keep out, and reporting failure while the guard keeps it leaves nothing to ever give it back. Also whether a `finally` that gives the primitive back unconditionally can run in a state where the method does not hold it: after a timed wait whose result was discarded, after an acquire inside the `try` that can fail, after the body already released it, or never, because a `return` left between the acquire and the `try`.

Method: Roslyn syntax: `try` statements whose `finally` releases a synchronisation primitive under a bare local-bool guard, where the method also TOOK that same primitive before the `try`, checked for a `return` of a bool literal whose value disagrees with the flag state the method's own straight-line assignments put it in. Deterministic, provable per finding. Advisory.

X23 · Unguarded diagnostic materialisation10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether the work a diagnostic log line costs is paid only when that line is wanted — C# evaluates a call's arguments BEFORE the call, so a trace/debug message joined or projected out of a collection is built in full on every pass, and then discarded by a sink the shipped configuration leaves switched off.

Method: Roslyn syntax: log calls at a diagnostic level (a `Log`-prefixed method naming Trace/Debug/Verbose, or a bare `Debug`/`Trace`/`Verbose` on a receiver named for a logger), whose argument list is read for a call whose cost scales with a sequence — a LINQ operator, a materialisation, `string.Join`, a serializer — with no enclosing level check or conditional-compilation region. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `debug`/`trace`/`verbose` call on a receiver named for a logger, or a `log`-prefixed method naming the level, whose argument calls an array operator (`map`/`filter`/`reduce`/`sort`/…), `Array.from`, `Object.keys/values/entries`, `JSON.stringify`/`util.inspect` over anything but a literal, or an array `join` — outside any arrow or function passed as an argument, which the logger calls only when the level is on — with no enclosing `if`, `&&` or `?:` whose condition names a level, a level string, or the `NODE_ENV`/`__DEV__`/`DEV` build switch. Deterministic, provable per finding. Advisory.

X24 · Document value interpolated into markup unescaped10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether text read out of the document being converted is escaped before it is written into generated markup — a value the document's author chose, interpolated into an attribute the surrounding literal delimits, can close that attribute and open another.

Method: Roslyn semantic model over the whole compilation: a string-typed `Value`/`InnerText`/`InnerXml`/`Text` member declared inside `DocumentFormat.OpenXml` or `System.Xml` is a taint SOURCE, propagated through assignments, returns, arguments, tuple elements and string composition to its transitive closure, then read at interpolated-string holes that sit in a markup position the surrounding literal itself delimits. Escaper/encoder calls and enclosing validator conditions cut the flow. Flow- and container-insensitive by construction. A second arm needs no provenance at all and reports a type that CONTRADICTS ITSELF — the same expression escaped at one delimited markup hole and interpolated raw at another hole in the same markup position of the same type, which the type's own escaping proves is a defect without knowing where the value came from. On a repository with no .NET source it reads JavaScript/TypeScript off the token stream with the same rule: a DOM read of raw document text (`getAttribute`, `textContent`, `innerText`, `nodeValue`) is the source, propagated through local bindings and string composition, and judged at template-literal and concatenation holes in the same two delimited markup positions; escapers and validating conditions cut it, and documentation-site, test, vendored and minified scripts are not read. Deterministic, provable per finding. Advisory.

X25 · Inert configuration knob10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a value the caller is invited to supply is the value the type actually uses — a constructor parameter stored in a private field that nothing ever reads while the default it was given is spelled out a second time at the site that should have read it, a keyed lookup that falls back to a different setting than the one its key names while the same type falls back to the matching one for that same key, or a culture-sensitive parse given no format provider by a type that feeds its own settable culture to the same kind of parse elsewhere, or a number an entry point writes to standard output under the host's culture while the same entry point formats with the invariant culture elsewhere. Either way, every caller who supplies a value silently gets something else.

Method: Roslyn syntax: private instance fields of a non-partial type assigned in a constructor from one of its own parameters with a `??` fallback, checked for whether anything in the type body reads the field and whether that same fallback expression is spelled out again outside the constructor; and `??` fallbacks onto a member access from a lookup call carrying exactly one string literal, grouped by that key across the type and checked for a fallback member whose folded name disagrees with the key while a sibling site for the same key agrees with it. On a repository with no .NET source the first two arms read JavaScript/TypeScript off the engine’s own token stream (tests included, bundles and vendored paths not): a `#x`, `private` or `private` parameter-property instance field filled in the constructor from a parameter (or one member of one) through `??`/`||` or a parameter default, never read anywhere in the file by name, whose constructed default is spelled again in the class body; and `lookup("key") ?? s.member` grouped by key per class, or per module outside every class. The culture arm has no JavaScript counterpart: its parses take no locale. Deterministic, provable per finding. Advisory.

X27 · Collection changed while being enumerated10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a `foreach` leaves the collection it is walking alone — a body that adds to or removes from the very collection the loop is enumerating invalidates the enumerator it is holding, so the next `MoveNext` throws `InvalidOperationException` and the remaining items are never seen.

Method: Roslyn syntax + semantics: `foreach` statements whose body calls a structural mutator (`Add`/`Remove`/`Clear`/`Insert`/…) on the very expression the loop is enumerating. Two arms. ARM A — the source is a concrete fragile BCL collection, or a live `Keys`/`Values` view over one, and the mutator resolves to that same collection's own member; concurrent and immutable collections and arrays are outside the population by construction, since their enumerators survive a structural change. ARM B — the source is an argument-less accessor CALL on a receiver whose body is in source: the accessor must return a stored field VERBATIM and a sibling member must structurally change that same field, both read off the implementations rather than from the members' names. A mutation the loop provably exits immediately after (`break`/`return`/`throw`/`goto`), or one written inside a nested loop or a lambda, is counted and never reported. Deterministic, provable per finding. Advisory.

X28 · Index access outside its own emptiness guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a condition that tests a value for emptiness indexes that same value only where the test holds — an `||` written one parenthesis too far to the left leaves an index access outside the guard beside it, so the empty case the guard exists to anticipate reaches the index and throws.

Method: Roslyn syntax only, no semantic model: the OUTERMOST `&&`/`||` of every boolean condition, read for a symbol the condition tests for emptiness (`string.IsNullOrEmpty`/`IsNullOrWhiteSpace`, a `Length`/`Count` comparison against a literal, `Any()`, a `Length`/`Count` pattern, or a comparison against `""`) and ALSO indexes. Each `symbol[...]` access is placed by a boolean-reachability walk from the access up to the outermost connective: an access is COVERED when some enclosing step has it in the right operand and the left operand, under the truth value that step forces, proves the symbol non-empty — a recursion over `&&`/`||` whose true- and false-directions are asymmetric. A finding needs BOTH an uncovered access and a covered one on the same symbol in the same condition, which is the agreeing twin that separates a misplaced parenthesis from an unrelated length test. Bare index accesses with no emptiness test in the condition are neither counted nor reported; a non-identifier receiver and a lambda nested inside the condition are outside the population. Deterministic, provable per finding. Advisory.

X29 · Per-element action decided by a fixed element10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a decision taken once per element is taken ABOUT that element — a test inside a counted loop that reads a fixed subscript of the very collection its guarded statement indexes by the loop variable applies element zero's answer to all of them, so the elements that differ from it are all handled wrongly, and in the same direction.

Method: Roslyn syntax only, no semantic model: every `for` statement declaring exactly ONE loop variable, and every `if` inside its body that is not under a nested loop or a lambda. A site enters the population when the `if`’s condition never mentions the loop variable while the statement it guards indexes some collection by that variable ALONE (`c[i]`; `c[i + 1]` and `c[i, j]` are outside it). A finding additionally needs the AGREEING TWIN at the same-collection grain: the condition must read THAT SAME collection at a subscript that does not move — written into the condition, or reached through a local declared BEFORE the loop, so an alias bound inside the body is not followed. Both collection expressions must be simple identifiers. On a repository with no .NET source the same rule reads JavaScript/TypeScript off the engine’s own token stream (tests included, bundles and vendored paths not): a `for (let|var|const x = …; …; …)` with one declarator and a braced body, an alias followed only when it is declared before the loop in a block that encloses it and never assigned inside the loop. Deterministic, provable per finding. Advisory.

X3 · Exception handling5.6 / 10Adequate✓ Tool-verified

Other · Code Health — Whether exceptions are handled rather than silently swallowed or rethrown with lost stack traces.

Method: Roslyn syntax scan: every catch clause counted; empty catches and bare rethrows flagged. Population is all catch clauses, not estimated. Deterministic, hard fact.

  • An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it. (×28) — src/UniGetUI.Avalonia/App.axaml.cs:307, src/UniGetUI.Avalonia/CrashHandler.cs:168, src/UniGetUI.Avalonia/CrashHandler.cs:263, …
  • `catch` does nothing with the exception it caught — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch. Log it through whatever this codebase already uses to report problems, or let it propagate; if one specific failure genuinely cannot matter, catch exactly that exception type and say why in a comment on the catch. (×5) — src/UniGetUI.Avalonia/CrashHandler.cs:88, src/UniGetUI.Avalonia/Views/Controls/Settings/ComboboxCard.cs:70, src/UniGetUI.AgentSkills.Cli/GhInstalled.cs:170, …
  • `catch (GitException)` does nothing with the exception it caught — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch. Log it through whatever this codebase already uses to report problems, or let it propagate; if one specific failure genuinely cannot matter, catch exactly that exception type and say why in a comment on the catch. — src/UniGetUI.Avalonia/ViewModels/Pages/GitRepositoriesViewModel.cs:545
  • `catch (JsonException)` does nothing with the exception it caught — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch. Log it through whatever this codebase already uses to report problems, or let it propagate; if one specific failure genuinely cannot matter, catch exactly that exception type and say why in a comment on the catch. — src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:1302
  • `catch (InvalidOperationException)` does nothing with the exception it caught — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch. Log it through whatever this codebase already uses to report problems, or let it propagate; if one specific failure genuinely cannot matter, catch exactly that exception type and say why in a comment on the catch. (×2) — src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyValidationFinding.cs:286, src/UniGetUI.AgentSkills.Cli/Sync.cs:257
  • `catch (Exception)` does nothing with the exception it caught — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch. Log it through whatever this codebase already uses to report problems, or let it propagate; if one specific failure genuinely cannot matter, catch exactly that exception type and say why in a comment on the catch. — src/UniGetUI.Avalonia/Infrastructure/GHAuthApiRunner.cs:39
  • `catch (GitHubReleaseException)` does nothing with the exception it caught — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch. Log it through whatever this codebase already uses to report problems, or let it propagate; if one specific failure genuinely cannot matter, catch exactly that exception type and say why in a comment on the catch. — src/UniGetUI.AgentSkills.Cli/GhInstalled.cs:224
  • `catch (Exception) when (…)` does nothing with the exception it caught — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch. Log it through whatever this codebase already uses to report problems, or let it propagate; if one specific failure genuinely cannot matter, catch exactly that exception type and say why in a comment on the catch. — src/UniGetUI.AgentSkills.Cli/Preview.cs:424

What to do

  • Swallowed exception (empty catch)
X30 · Support guard that admits what it rejects10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a guard written as a NEGATED `||` says what its author meant — `!(a || b || x != k)` is `!a && !b && x == k` by De Morgan, so a bail-out that mixes capabilities the code needs with a fault it refuses turns inside out: it fires only where the capabilities are ABSENT, and lets every value the fault term names walk straight into the body that cannot handle it.

Method: Roslyn syntax only, no semantic model: every logical-not whose operand is a parenthesised `||` chain of two or more disjuncts, flattened (a left-nested `a || b || c` read once would see `(a || b)` as one disjunct). A site enters the population on that shape alone. A finding additionally needs the disjuncts to DISAGREE in polarity: at least one bare boolean read — an identifier or member access, never an invocation, which is a predicate rather than a capability flag — and at least one `x != <constant>`, the only form that negates into an exact-value pin (`== null` negates into a looser requirement and is outside the fault set). Consistently-polarised disjunctions, all-fault or all-capability, are counted and never reported; a negated `&&` is outside the population entirely. No same-receiver gate: it was measured to cost a real defect and remove no false positive. Deterministic, provable per finding. Advisory.

X4 · Structured logging3.2 / 10Weak✓ Tool-verified

Other · Code Health — Whether log calls use message templates (queryable) rather than interpolated strings.

Method: Roslyn syntax scan: every log call-site counted; interpolated-string first-argument violations flagged. Population is all log calls, not estimated. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `trace`/`debug`/`info`/`warn`/`error`/`fatal`/`verbose`/`silly`/`http`/`log` call on a receiver named for a logger, in a package whose own or an enclosing `package.json` declares a logger that carries values as fields (pino, pino-http, nestjs-pino, Fastify, winston, bunyan, tslog, LogTape, roarr), whose first deciding argument is a template literal with substitutions; an object-literal fields argument is stepped over, a plain string message clears the call. Python is read the same way: a `debug`/`info`/`warning`/`error`/`exception`/`critical`/`log` call on a logger in a file that imports the standard library’s `logging` or structlog (loguru, which formats at the call, is not judged), whose message is a whole f-string with a non-constant field; a `%`-formatted, `.format()`-ed or concatenated message is not convicted, as in C#. PHP is read the same way: a PSR-3 level call (`emergency`…`debug`, `log`) on a logger (`$logger`, `$this->logger`, Laravel’s `Log::`, `logger()`, `\Drupal::logger()`) in a package whose `composer.json` requires a PSR-3 logger or a framework that hands one out (psr/log, Monolog, Laravel, Symfony, Drupal, CakePHP), or a file that imports one, whose message is a double-quoted string interpolating a variable; a single-quoted message clears the call, and `sprintf` or `.` concatenation is not convicted, as in C#. Dart is read the same way: a `trace`/`debug`/`info`/`warn`/`error`/`fatal` call on Sentry’s structured logger (`Sentry.logger`) whose message is a whole string literal interpolating a value (`$name`, `${…}`); the `Sentry.logger.fmt` template API clears the call. Dart that logs only through loggers with one message and no fields (package:logging, package:logger, talker, dart:developer) is not applicable rather than a reach gap. Ruby is read the same way: a `trace`/`debug`/`info`/`warn`/`error`/`fatal` call on the console gem’s `Console` (declared by a Gemfile, gemspec or Gemfile.lock, or required) or, where SemanticLogger, Ougai or dry-logger is declared or required, on a receiver named for a logger (`logger`, `@logger`, `Rails.logger`, `log`), whose first deciding argument is, as the whole argument, a double-quoted string interpolating a non-constant value (`#{…}`, `#@ivar`); a plain literal clears the call, keyword arguments are the fields, and a block, `%`-format or `+` concatenation is not convicted. Ruby that logs only through the standard Logger (Rails.logger) is not applicable rather than a reach gap. Deterministic.

  • Logging an interpolated string (`$"..."`) collapses the event to plain text — you lose the named, queryable properties structured logging exists for. Use a message template with placeholders: `LogInformation("User {UserId} did {Action}", id, action)`. If these calls go through a logging wrapper that only accepts a pre-formatted string, give the wrapper a template+args overload that forwards to the underlying logger, then migrate call sites to it. (×5) — src/UniGetUI.Tui/FakeData/FakePackageManager.cs:107, src/UniGetUI.Tui/FakeData/FakePackageManager.cs:116, src/UniGetUI.Tui/FakeData/FakePackageManager.cs:133, …

What to do

  • Interpolated log message defeats structured logging
X5 · Nullable reference types9.7 / 10Exemplary✓ Tool-verified

Other · Code Health — Whether nullable reference types are enabled and not undermined by heavy `!` suppression.

Method: Roslyn compiler-options scan: NullableContextOptions per project; null-forgiving (!) suppression density per 1k syntax nodes. Deterministic, adoption plus suppression penalty.

  • This method contradicts itself about `skill`: line 288 writes `skill?.Description`, which says `skill` can be null, but line 284 then dereferences it directly as `skill.Name` with no null test between them and no guard around it. If the `?.` is right, that dereference throws NullReferenceException on the input it was written for; if `skill` truly cannot be null here, the `?.` is misleading. Settle it one way — test `skill` once before the first use and handle the null case, or drop the `?.` — rather than leaving the two readings side by side. — src/UniGetUI.Extensions.AgentSkills/AgentSkillsService.cs:284
  • This method contradicts itself about `info`: line 81 writes `info?.`, which says `info` can be null, but line 38 then dereferences it directly with no null test between them and no guard around it. If the `?.` is right, that dereference throws NullReferenceException on the input it was written for; if `info` truly cannot be null here, the `?.` is misleading. Settle it one way — test `info` once before the first use and handle the null case, or drop the `?.` — rather than leaving the two readings side by side. — src/UniGetUI.PackageEngine.Managers.Pip/Helpers/PipPkgDetailsHelper.cs:38
  • ~0.3 `!` suppressions per 1k syntax nodes — 272 suppression(s) across the 825025 syntax node(s) in code where nullable warnings are ENABLED, which is the only code a `!` can suppress anything in (a `!` under `#nullable disable` is inert and is not counted, and its file's nodes are not in the denominator). Each one tells the compiler to trust you about null, suppressing the very safety NRTs provide. Many are correct: each is a claim the checker could not verify, and it is wrong only where the value can in fact be missing, so review the densest places first.

What to do

  • Where a method uses `?.` on a symbol and then dereferences it directly, settle the question once: test it before the first use and handle null, or drop the `?.`.
  • Enable <Nullable>enable</Nullable> across all projects and resolve warnings rather than suppressing with `!`.

Reference — by lens

The score is the rank-weighted fold of these lenses (worst-heaviest), each including its meta-dimensions; a lens with a Critical contributor is capped at Fair (its band reads "gated by …") and is never the strongest area however high its average.

LensScoreRatingImpact
Code Health52%Adequate — gated by X4Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Architecture71%Adequate — gated by AX2Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Maturity66%Adequate — gated by M2Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Readiness53%Adequate — gated by P7Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Security37%Weak — gated by D29, D36, C1, S1Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Performance60%AdequateStrongest area.
Unscored — 5 check(s) recorded observations but carry no score

These checks ran and found something, but they do not carry a score — either by design (an advisory check reports evidence rather than grading it) or because they could not be scored here. They are excluded from the score for that reason, not because there was nothing to see.

  • P12 CI test-gate honesty — 1 observation(s) recorded · Reported, not scored — this card publishes what the CI gate does with the test inventory rather than grading it. The findings above are its output.
  • SC1 Supply-chain hygiene — 1 observation(s) recorded · Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • X10 Duplicated predicate — 25 observation(s) recorded · Advisory — this card reports evidence and never carries a score.
  • X6 Hand-rolled structured-format parsing — 5 observation(s) recorded · Advisory — this card reports evidence and never carries a score.
  • X7 Silent fallback defaults — 40 observation(s) recorded · Advisory — this card reports evidence and never carries a score.
Not evidenced — 2 control(s) we could not find positive evidence for

These checks grade a working control, and the repository shows no evidence of one. That is deliberately not scored as a zero: a repository cannot show an ops runbook, a database TTL or an infrastructure-side audit log, so absence of evidence here is not evidence the control is missing. It is also not a statement that the check is irrelevant to this codebase — the thing it grades applies; we just could not see it. Excluded from the score either way.

  • C3 Audit Trail — Repo shows no audit-logging mechanism (IAuditable, an immutable audit log, an EF SaveChanges interceptor) for sensitive changes — absence of evidence is not evidence of a working control. Record an audit trail in code (or document where it lives) so this dimension can be scored.
  • C5 Data-Subject Rights — Repo shows no corroborated data-subject-rights mechanism (erasure / export-portability / consent) tied to a subject id or GDPR vocabulary — absence of evidence is not evidence of a working control. Implement erasure, data export/portability and consent tracking over the subject's records.
Not included — 39 check(s) not relevant to this codebase

These checks had nothing to measure here (no tests, no git history, the codebase is small, or the architecture style doesn't apply), so they're omitted above rather than scored low.

  • AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
  • AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
  • AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
  • AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
  • AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
  • AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
  • AX4 Dependency direction — not applicable to a transaction-script/CRUD architecture (the inward-dependency rule is for layered/clean styles)
  • AX7 Slice cohesion — not applicable — not a vertical-slice architecture
  • AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
  • AXB1 Runtime evidence locked — no reproducible boot — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • D11 Test Reliability — Test reliability not included
  • D12 Dependency Hygiene — Dependency hygiene not measured
  • D22 Internal API Consistency — No intentionally-exposed public API to evaluate for consistency.
  • D23 Boundary Type-Coupling — Cross-context type coupling could not be assessed — this codebase's bounded contexts are neither declared nor inferable.
  • D25 ADR Conformance — no ADRs to check
  • D30 Dependency Vulnerabilities — nuget: the solution did not restore on the analyzer's .NET SDK (an SDK/target-framework/restore mismatch, common for an older codebase), so there was no restored dependency graph to scan
  • D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.
  • D32 Data Compliance (PII/GDPR) — 153 file(s) were not parsed by semgrep — the PII/GDPR ruleset never ran over them
  • D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
  • D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
  • D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
  • D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
  • D7 Architectural Integrity — no checkable ADRs and no dependency cycles — architectural integrity not assessed
  • D8 Code Coverage — Coverage not measured — analyzer environment
  • DM1 Domain Modelling — not scored — this repository shows only 1 of the 3 signals this lens looks for (48 value object(s))
  • ED1 Event-Driven — not scored — this repository shows none of the 3 signals this lens looks for
  • ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
  • ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
  • P8 Schema migrations — no EF Core usage detected
  • P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (Cobertura — `dotnet test --collect:"XPlat Code Coverage"` with a `coverlet.collector` PackageReference) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures, or wire coverage collection into CI, to enable this cross-layer check
  • PF1 Benchmark discipline — Not applicable: no benchmark suite was found by the two searches this check runs — a BenchmarkDotNet package reference in any project file (loaded, or on disk), and a script whose name contains `benchmark` that this repository's CI runs. Neither can see a suite in another ecosystem's idiom, so this is not a verdict that the repository has none. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted, and nothing is asked of a repository that has none.
  • PF2 Allocation hygiene — Not scored: this check counted allocation-aware idioms (Span, pools, stackalloc) per line, which describes what kind of code a repository is rather than whether it has an allocation problem, so it was withdrawn. Nothing here is a finding about your code.
  • X14 Bypassable address classification — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
  • X15 Unvalidated length from an untrusted reader — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
  • X17 Uncapped recursion over a caller-supplied document — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
  • X26 Unsynchronised callback handoff — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
  • X32 Type resolved by simple name across every loaded assembly — not applicable — the code was read and holds no site of this kind, so there is nothing for this check to judge
  • X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.

Appendix A — Findings (grouped)

The findings behind the scores, grouped by severity, then by dimension and kind. The high-severity issues are enumerated in full below; items per group are capped at 25 with any overflow stated explicitly per group, never silently truncated. The complete machine-readable list of every finding (all severities) is the companion findings.md in this report's bundle.

Critical — 165 finding(s)
D29 · Static Analysis (SAST) · REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • + 41 more in this group — see findings.md.
D17 · Explicit Debt · EmptyCatchBlock · ×64
  • EmptyCatchBlock src/Shared/AutoUpdater.Helpers.cs:504 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/Shared/AutoUpdater.Helpers.cs:539 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/Shared/AutoUpdater.Helpers.cs:691 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.AgentSkills.Cli/Preview.cs:361 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.AgentSkills.Cli/Ui.cs:428 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.AgentSkills.Cli/Ui.cs:455 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.Avalonia/App.axaml.cs:307 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.Avalonia/CrashHandler.cs:168 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.Avalonia/CrashHandler.cs:263 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.Avalonia/CrashHandler.cs:278 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:174 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:282 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:1660 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.Avalonia/Infrastructure/MicaWindowHelper.cs:187 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.Avalonia/Models/PackageRowModel.cs:184 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.Avalonia/Program.cs:44 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationViewModel.cs:184 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationViewModel.cs:192 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.Avalonia/ViewModels/DialogPages/PackageDetailsViewModel.cs:350 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.Avalonia/ViewModels/DialogPages/PackageDetailsViewModel.cs:378 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.Avalonia/ViewModels/DialogPages/PackageDetailsViewModel.cs:396 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.Avalonia/ViewModels/Pages/AboutPages/ContributorsViewModel.cs:36 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.Avalonia/ViewModels/Pages/AboutPages/TranslatorsViewModel.cs:38 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:1136 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • EmptyCatchBlock src/UniGetUI.Avalonia/Views/Controls/SvgIcon.cs:157 — empty catch block — the error is discarded with nothing recorded, so a failure here leaves no trace anywhere. Record it through whatever this codebase already uses to report problems, or let it propagate. Where swallowing one specific failure really is correct — as it often is on a teardown/dispose path where throwing would mask the original failure — catch exactly that exception type and write down WHY in a comment on the catch. Both are needed: a comment on a catch-all still swallows every failure nobody anticipated, and a note that only restates the swallow ("ignored", "do nothing") is read as no explanation at all.
  • + 39 more in this group — see findings.md.
AX3 · Project dependency cycles · Namespace dependency cycle · ×5
  • Namespace dependency cycle src/UniGetUI.AgentSkills/Api/SkillsManager.cs:1 — The namespaces Devolutions.AgentSkills ↔ Skills depend on each other. The lightest dependency in the cycle is Devolutions.AgentSkills → Skills (Devolutions.AgentSkills.SkillsManagerOptions → Skills.DownloadedSource, 2 type pair(s)); cut that one first, e.g. by moving the shared type to a namespace both can use or inverting it behind an interface.
  • Namespace dependency cycle src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/Interop/WindowsAuthenticodeTrustVerifier.cs:37 — The namespaces UniGetUI.PackageEngine.AgentBroker.PolicyWriteElevation ↔ UniGetUI.PackageEngine.AgentBroker.PolicyWriteElevation.Interop depend on each other. The lightest dependency in the cycle is UniGetUI.PackageEngine.AgentBroker.PolicyWriteElevation.Interop → UniGetUI.PackageEngine.AgentBroker.PolicyWriteElevation (UniGetUI.PackageEngine.AgentBroker.PolicyWriteElevation.Interop.WindowsAuthenticodeTrustVerifier → UniGetUI.PackageEngine.AgentBroker.PolicyWriteElevation.IPolicyElevationTrustVerifier, 3 type pair(s)); cut that one first, e.g. by moving the shared type to a namespace both can use or inverting it behind an interface.
  • Namespace dependency cycle src/UniGetUI.Avalonia/Infrastructure/AvaloniaPackageOperationHelper.cs:14 — The namespaces UniGetUI.Avalonia.Infrastructure ↔ UniGetUI.Avalonia.Models ↔ UniGetUI.Avalonia.ViewModels ↔ UniGetUI.Avalonia.ViewModels.Controls ↔ UniGetUI.Avalonia.ViewModels.Pages ↔ UniGetUI.Avalonia.ViewModels.Pages.LogPages ↔ UniGetUI.Avalonia.ViewModels.Pages.SettingsPages ↔ UniGetUI.Avalonia.ViewModels.Pages.SettingsPages.PolicyEditor ↔ UniGetUI.Avalonia.Views ↔ UniGetUI.Avalonia.Views.Controls ↔ UniGetUI.Avalonia.Views.Controls.Settings ↔ UniGetUI.Avalonia.Views.DialogPages ↔ UniGetUI.Avalonia.Views.Pages ↔ UniGetUI.Avalonia.Views.Pages.LogPages ↔ UniGetUI.Avalonia.Views.Pages.SettingsPages ↔ UniGetUI.Avalonia.Views.Pages.SettingsPages.PolicyEditor ↔ UniGetUI.Interface ↔ UniGetUI.Interface.Telemetry ↔ UniGetUI.PackageEngine.AgentBroker ↔ UniGetUI.PackageEngine.Classes.Manager ↔ UniGetUI.PackageEngine.Classes.Manager.Classes ↔ UniGetUI.PackageEngine.Interfaces ↔ UniGetUI.PackageEngine.Interfaces.ManagerProviders ↔ UniGetUI.PackageEngine.ManagerClasses.Classes ↔ UniGetUI.PackageEngine.ManagerClasses.Manager ↔ UniGetUI.PackageEngine.Operations ↔ UniGetUI.PackageEngine.PackageClasses ↔ UniGetUI.PackageEngine.PackageLoader depend on each other. The lightest dependency in the cycle is UniGetUI.Avalonia.Infrastructure → UniGetUI.Interface.Telemetry (UniGetUI.Avalonia.Infrastructure.AvaloniaPackageOperationHelper → UniGetUI.Interface.Telemetry.TEL_InstallReferral, 1 type pair(s)); cut that one first, e.g. by moving the shared type to a namespace both can use or inverting it behind an interface.
  • Namespace dependency cycle src/UniGetUI.Tui/Infrastructure/TuiChrome.cs:4 — The namespaces UniGetUI.Tui.Infrastructure ↔ UniGetUI.Tui.Views.Controls depend on each other. The lightest dependency in the cycle is UniGetUI.Tui.Infrastructure → UniGetUI.Tui.Views.Controls (UniGetUI.Tui.Infrastructure.TuiChrome → UniGetUI.Tui.Views.Controls.TuiPanel, 1 type pair(s)); cut that one first, e.g. by moving the shared type to a namespace both can use or inverting it behind an interface.
  • Namespace dependency cycle src/UniGetUI.Tui/Views/Dialogs/PackageListDialogs.cs:3 — The namespaces UniGetUI.Tui.Views.Dialogs ↔ UniGetUI.Tui.Views.Pages depend on each other. The lightest dependency in the cycle is UniGetUI.Tui.Views.Dialogs → UniGetUI.Tui.Views.Pages (UniGetUI.Tui.Views.Dialogs.SearchOptionsDialog → UniGetUI.Tui.Views.Pages.PackageListPage, 1 type pair(s)); cut that one first, e.g. by moving the shared type to a namespace both can use or inverting it behind an interface.
D28 · Secrets (history) · REDACTED · ×5
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D5 · Coupling · Layer violation · ×5
  • Layer violation: Domain → Infrastructure src/UniGetUI.Core.IconStore/UniGetUI.Core.IconEngine.csproj:7 — UniGetUI.Core.IconEngine (Domain) references UniGetUI.Core.Data (Infrastructure) — dependencies must point inward (Web → Application → Domain; Infrastructure implements inner interfaces, nothing depends outward on it).
  • Layer violation: Domain → Infrastructure src/UniGetUI.Core.LanguageEngine/UniGetUI.Core.LanguageEngine.csproj:31 — UniGetUI.Core.LanguageEngine (Domain) references UniGetUI.Core.Data (Infrastructure) — dependencies must point inward (Web → Application → Domain; Infrastructure implements inner interfaces, nothing depends outward on it).
  • Layer violation: Domain → Infrastructure src/UniGetUI.Core.SecureSettings/UniGetUI.Core.SecureSettings.csproj:7 — UniGetUI.Core.SecureSettings (Domain) references UniGetUI.Core.Data (Infrastructure) — dependencies must point inward (Web → Application → Domain; Infrastructure implements inner interfaces, nothing depends outward on it).
  • Layer violation: Domain → Infrastructure src/UniGetUI.Core.Settings/UniGetUI.Core.Settings.csproj:7 — UniGetUI.Core.Settings (Domain) references UniGetUI.Core.Data (Infrastructure) — dependencies must point inward (Web → Application → Domain; Infrastructure implements inner interfaces, nothing depends outward on it).
  • Layer violation: Domain → Infrastructure src/UniGetUI.Core.Tools/UniGetUI.Core.Tools.csproj:8 — UniGetUI.Core.Tools (Domain) references UniGetUI.Core.Data (Infrastructure) — dependencies must point inward (Web → Application → Domain; Infrastructure implements inner interfaces, nothing depends outward on it).
D17 · Explicit Debt · NoWarnInCsproj · ×3
  • NoWarnInCsproj src/UniGetUI.Avalonia/UniGetUI.Avalonia.csproj:45 — MVVMTK0045 — this warning is switched off for the WHOLE project, in every file it builds, including code written years from now: nothing at the call site records that the rule was ever silenced, so the next reader has no reason to look here. Fix what the rule is reporting and drop the code from the list, or — if some occurrences really are legitimate — narrow the suppression to those sites and give each one its reason, so the rule keeps protecting the rest of the project.
  • NoWarnInCsproj src/UniGetUI.Avalonia/UniGetUI.Avalonia.csproj:45 — AVLN3001 — this warning is switched off for the WHOLE project, in every file it builds, including code written years from now: nothing at the call site records that the rule was ever silenced, so the next reader has no reason to look here. Fix what the rule is reporting and drop the code from the list, or — if some occurrences really are legitimate — narrow the suppression to those sites and give each one its reason, so the rule keeps protecting the rest of the project.
  • NoWarnInCsproj src/Directory.Build.props:65 — EnableGenerateDocumentationFile — this warning is switched off for the WHOLE project, in every file it builds, including code written years from now: nothing at the call site records that the rule was ever silenced, so the next reader has no reason to look here. Fix what the rule is reporting and drop the code from the list, or — if some occurrences really are legitimate — narrow the suppression to those sites and give each one its reason, so the rule keeps protecting the rest of the project.
D29 · Static Analysis (SAST) · REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D17 · Explicit Debt · FileScopedPragmaDisable · ×2
  • FileScopedPragmaDisable src/UniGetUI.Core.Classes.Tests/SortableObservableCollectionTests.cs:1 — #pragma warning disable CA1852 — the disable has no matching restore anywhere in this file, so it does not end with the construct that needed it: it runs to the end of the file and silences the rule for everything written below, including code added years later that nobody weighed against it. Close it with the matching restore directive immediately after the construct it covers — that alone turns a standing exemption into a scoped one — or fix the cause and drop the directive entirely.
  • FileScopedPragmaDisable src/UniGetUI.Core.Logging.Tests/LoggerTests.cs:1 — #pragma warning disable CA2201 — the disable has no matching restore anywhere in this file, so it does not end with the construct that needed it: it runs to the end of the file and silences the rule for everything written below, including code added years later that nobody weighed against it. Close it with the matching restore directive immediately after the construct it covers — that alone turns a standing exemption into a scoped one — or fix the cause and drop the directive entirely.
D29 · Static Analysis (SAST) · REDACTED
  • REDACTED
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED
  • REDACTED
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED · ×1
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED · ×1
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED · ×1
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED · ×1
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED · ×1
  • REDACTED
D35 · Change Coupling · Boundary-crossing change coupling · ×1
  • Boundary-crossing change coupling: ChocolateyDetailsHelper.cs ↔ WinGetCliHelper.cs src/UniGetUI.PackageEngine.Managers.Chocolatey/Helpers/ChocolateyDetailsHelper.cs:1 — `src/UniGetUI.PackageEngine.Managers.Chocolatey/Helpers/ChocolateyDetailsHelper.cs` (context UniGetUI.PackageEngine.Managers.Chocolatey) and `src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetCliHelper.cs` (context UniGetUI.PackageEngine.Managers.WinGet) sit in DIFFERENT parts of the tree yet change together 58% of the time (7 of the 12 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets) — the bounded-context boundary may be in the wrong place, or one context is leaking into the other. This is the behavioural boundary violation a static scan can't see. You can check this without leaving the row: of the 7 shared commits counted here, the most recent 3 are `a7d04106` Migrate Manager.Properties.ExecutableCallArguments to Manager.Status.… (at that commit the file was still `src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/BundledWinGetHelper.cs`); `d7bee713` Add proxy to Chocolatey and WinGet (at that commit the file was still `src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/BundledWinGetHelper.cs`); `20cd3ac7` Properly dispose Process instances (fix #3366) (at that commit the file was still `src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/BundledWinGetHelper.cs`) — run `git show` on any of them.
IC1 · Incompleteness & stubs · Unfinished stub · ×1
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:194 — `GetParameters` is a shipped member whose body only throws — and it is REACHED: src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:192 references it. This is not dead surface that can be deleted — anything taking that path throws at runtime. Implement the member, or remove the code that reaches it.
S1 · Web-Security Posture · TLS certificate validation disabled · ×1
  • TLS certificate validation disabled src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:2033 — `ServerCertificateCustomValidationCallback` is assigned a callback that returns `true` unconditionally, so every TLS peer certificate is accepted — including one an attacker presents. Chain, expiry, revocation and hostname are all skipped, so an attacker on the network path can present any certificate and read or rewrite the traffic — the connection is encrypted to the attacker, not to the intended host. Delete the override and let the platform validate. If a specific self-signed or internally-issued certificate genuinely has to be trusted, pin THAT one — compare the presented certificate's public key or thumbprint against the expected value and return `false` for everything else — and scope it to the single handler that talks to that host rather than to the whole process. If the override exists only to get past a development certificate, gate it on a build configuration or an explicit opt-in setting so it cannot ship.
Serious — 1222 finding(s)
D3 · God Classes · TooManyMethods · ×43
  • TooManyMethods: MainWindow src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs — TooManyMethods — 1505 significant lines (blank, comment-only and punctuation-only lines excluded), 120 methods, declared across 2 files: Views/MainWindow.axaml.cs (108), Views/MainWindow.MacMenu.cs (12). The bar is 30 methods; this is 90 over it, 4.00× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: IpcClient src/UniGetUI.Interface.IpcApi/IpcClient.cs — TooManyMethods — 944 significant lines (blank, comment-only and punctuation-only lines excluded), 110 methods. The bar is 30 methods; this is 80 over it, 3.67× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: IpcServer REDACTED — TooManyMethods — 1207 significant lines (blank, comment-only and punctuation-only lines excluded), 106 methods. The bar is 30 methods; this is 76 over it, 3.53× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: CoreTools REDACTED — TooManyMethods — 1127 significant lines (blank, comment-only and punctuation-only lines excluded), 90 methods. The bar is 30 methods; this is 60 over it, 3.00× the bar. The type holds no instance state, so there is no shared data to group its members by. To reduce it, split it by area instead: give each cohesive family of members its own smaller type, so no one type has to be read whole to change one of them.
  • TooManyMethods: PackageListPage src/UniGetUI.Tui/Views/Pages/PackageListPage.cs — TooManyMethods — 968 significant lines (blank, comment-only and punctuation-only lines excluded), 85 methods. The bar is 30 methods; this is 55 over it, 2.83× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: AbstractPackagesPage src/UniGetUI.Avalonia/Views/SoftwarePages/AbstractPackagesPage.axaml.cs — TooManyMethods — 753 significant lines (blank, comment-only and punctuation-only lines excluded), 78 methods, declared across 2 files: SoftwarePages/AbstractPackagesPage.axaml.cs (66), SoftwarePages/AbstractPackagesPage.DetailsPane.cs (12). The bar is 30 methods; this is 48 over it, 2.60× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: AgentSkillsViewModel src/UniGetUI.Avalonia/ViewModels/Pages/AgentSkillsViewModel.cs — TooManyMethods — 987 significant lines (blank, comment-only and punctuation-only lines excluded), 77 methods. The bar is 30 methods; this is 47 over it, 2.57× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: PackagesPageViewModel src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs — TooManyMethods — 819 significant lines (blank, comment-only and punctuation-only lines excluded), 76 methods. The bar is 30 methods; this is 46 over it, 2.53× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: MainWindowViewModel src/UniGetUI.Avalonia/ViewModels/MainWindowViewModel.cs — TooManyMethods — 770 significant lines (blank, comment-only and punctuation-only lines excluded), 75 methods. The bar is 30 methods; this is 45 over it, 2.50× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: GitRepositoriesViewModel src/UniGetUI.Avalonia/ViewModels/Pages/GitRepositoriesViewModel.cs — TooManyMethods — 746 significant lines (blank, comment-only and punctuation-only lines excluded), 72 methods. The bar is 30 methods; this is 42 over it, 2.40× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: StartMenuShortcutsDatabase src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs — TooManyMethods — 740 significant lines (blank, comment-only and punctuation-only lines excluded), 68 methods. The bar is 30 methods; this is 38 over it, 2.27× the bar. The type holds no instance state, so there is no shared data to group its members by. To reduce it, split it by area instead: give each cohesive family of members its own smaller type, so no one type has to be read whole to change one of them.
  • TooManyMethods: AvaloniaAutoUpdater src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs — TooManyMethods — 1239 significant lines (blank, comment-only and punctuation-only lines excluded), 66 methods. The bar is 30 methods; this is 36 over it, 2.20× the bar. The type holds no instance state, so there is no shared data to group its members by. To reduce it, split it by area instead: give each cohesive family of members its own smaller type, so no one type has to be read whole to change one of them.
  • TooManyMethods: Pip src/UniGetUI.PackageEngine.Managers.Pip/Pip.cs — TooManyMethods — 784 significant lines (blank, comment-only and punctuation-only lines excluded), 65 methods. The bar is 30 methods; this is 35 over it, 2.17× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: PolicyEditorSessionViewModel src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs — TooManyMethods — 986 significant lines (blank, comment-only and punctuation-only lines excluded), 64 methods. The bar is 30 methods; this is 34 over it, 2.13× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: AgentPluginsViewModel src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs — TooManyMethods — 587 significant lines (blank, comment-only and punctuation-only lines excluded), 64 methods. The bar is 30 methods; this is 34 over it, 2.13× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: PackageOperation src/UniGetUI.PackageEngine.Operations/PackageOperations.cs — TooManyMethods — 921 significant lines (blank, comment-only and punctuation-only lines excluded), 62 methods. The bar is 30 methods; this is 32 over it, 2.07× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: PackageManager src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/PackageManager.cs — TooManyMethods — 656 significant lines (blank, comment-only and punctuation-only lines excluded), 59 methods. The bar is 30 methods; this is 29 over it, 1.97× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: PackageDetailsWindow src/UniGetUI.Avalonia/Views/DialogPages/PackageDetailsWindow.axaml.cs — TooManyMethods — 715 significant lines (blank, comment-only and punctuation-only lines excluded), 57 methods. The bar is 30 methods; this is 27 over it, 1.90× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: SoftwareCatalogViewModel src/UniGetUI.Avalonia/ViewModels/SoftwarePages/SoftwareCatalogViewModel.cs — TooManyMethods — 521 significant lines (blank, comment-only and punctuation-only lines excluded), 54 methods. The bar is 30 methods; this is 24 over it, 1.80× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: AbstractOperation src/UniGetUI.PackageEngine.Operations/AbstractOperation.cs — TooManyMethods — 759 significant lines (blank, comment-only and punctuation-only lines excluded), 53 methods, declared across 2 files: UniGetUI.PackageEngine.Operations/AbstractOperation.cs (41), UniGetUI.PackageEngine.Operations/AbstractOperation_Progress.cs (12). The bar is 30 methods; this is 23 over it, 1.77× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: WinGet src/UniGetUI.PackageEngine.Managers.WinGet/WinGet.cs — TooManyMethods — 654 significant lines (blank, comment-only and punctuation-only lines excluded), 52 methods. The bar is 30 methods; this is 22 over it, 1.73× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: MainWindow src/UniGetUI.Tui/Views/MainWindow.cs — TooManyMethods — 619 significant lines (blank, comment-only and punctuation-only lines excluded), 50 methods. The bar is 30 methods; this is 20 over it, 1.67× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: InstallOptionsViewModel src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs — TooManyMethods — 530 significant lines (blank, comment-only and punctuation-only lines excluded), 48 methods. The bar is 30 methods; this is 18 over it, 1.60× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: PackageWrapper src/UniGetUI.Avalonia/Models/PackageCollections.cs — TooManyMethods — 529 significant lines (blank, comment-only and punctuation-only lines excluded), 47 methods. The bar is 30 methods; this is 17 over it, 1.57× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: WinGetPkgOperationHelper src/UniGetUI.PackageEngine.Managers.WinGet/Helpers/WinGetPkgOperationHelper.cs — TooManyMethods — 597 significant lines (blank, comment-only and punctuation-only lines excluded), 44 methods. The bar is 30 methods; this is 14 over it, 1.47× the bar. The type holds no instance state, so there is no shared data to group its members by. To reduce it, split it by area instead: give each cohesive family of members its own smaller type, so no one type has to be read whole to change one of them.
  • + 18 more in this group — see findings.md.
D15 · Churn × Complexity Hotspots · Hotspot · ×40
  • Hotspot: src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:1512 — src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs changed 35 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 49 in MainWindow.OnWindowsWndProc at line 1512. 5 of those changes were fix/bug commits, and the other 30 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.Avalonia/Views/SoftwarePages/AbstractPackagesPage.axaml.cs src/UniGetUI.Avalonia/Views/SoftwarePages/AbstractPackagesPage.axaml.cs:48 — src/UniGetUI.Avalonia/Views/SoftwarePages/AbstractPackagesPage.axaml.cs changed 19 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 40 in AbstractPackagesPage.AbstractPackagesPage.ctor at line 48. 3 of those changes were fix/bug commits, and the other 16 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.Avalonia/Views/SoftwarePages/AbstractPackagesPage.axaml.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.PackageEngine.Managers.WinGet/Helpers/WinGetPkgOperationHelper.cs src/UniGetUI.PackageEngine.Managers.WinGet/Helpers/WinGetPkgOperationHelper.cs:431 — src/UniGetUI.PackageEngine.Managers.WinGet/Helpers/WinGetPkgOperationHelper.cs changed 15 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 38 in WinGetPkgOperationHelper._getOperationResult at line 431. 1 of those changes was a fix/bug commit, and the other 14 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.PackageEngine.Managers.WinGet/Helpers/WinGetPkgOperationHelper.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.PackageEngine.Operations/PackageOperations.cs src/UniGetUI.PackageEngine.Operations/PackageOperations.cs:1723 — src/UniGetUI.PackageEngine.Operations/PackageOperations.cs changed 26 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 21 in PackageOperation._getPostInstallOps at line 1723. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.PackageEngine.Operations/PackageOperations.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.Avalonia/ViewModels/MainWindowViewModel.cs src/UniGetUI.Avalonia/ViewModels/MainWindowViewModel.cs:506 — src/UniGetUI.Avalonia/ViewModels/MainWindowViewModel.cs changed 21 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 21 in MainWindowViewModel.MainWindowViewModel.ctor at line 506. 2 of those changes were fix/bug commits, and the other 19 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.Avalonia/ViewModels/MainWindowViewModel.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs:803 — src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs changed 23 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 17 in PackagesPageViewModel.UpdateFilteredState at line 803. 2 of those changes were fix/bug commits, and the other 21 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:489 — src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs changed 21 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 18 in SoftwareUpdatesPage.WhenPackagesLoaded at line 489. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.PackageEngine.Operations/AbstractOperation.cs src/UniGetUI.PackageEngine.Operations/AbstractOperation.cs:309 — src/UniGetUI.PackageEngine.Operations/AbstractOperation.cs changed 11 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 34 in AbstractOperation.MainThreadCore at line 309. 1 of those changes was a fix/bug commit, and the other 10 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.PackageEngine.Operations/AbstractOperation.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:802 — src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs changed 11 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 32 in AvaloniaAutoUpdater.PrepareAndLaunchAsync at line 802. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.Avalonia/Infrastructure/AvaloniaBootstrapper.cs src/UniGetUI.Avalonia/Infrastructure/AvaloniaBootstrapper.cs:292 — src/UniGetUI.Avalonia/Infrastructure/AvaloniaBootstrapper.cs changed 13 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 21 in AvaloniaBootstrapper.NavigateApp at line 292. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.Avalonia/Infrastructure/AvaloniaBootstrapper.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.PackageEngine.PackageLoader/AbstractPackageLoader.cs src/UniGetUI.PackageEngine.PackageLoader/AbstractPackageLoader.cs:187 — src/UniGetUI.PackageEngine.PackageLoader/AbstractPackageLoader.cs changed 9 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 29 in AbstractPackageLoader.ReloadPackages at line 187. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.PackageEngine.PackageLoader/AbstractPackageLoader.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:263 — src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs changed 14 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 18 in InstalledPackagesPage.WhenShowingContextMenu at line 263. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: REDACTED REDACTED:726 — REDACTED changed 15 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 16 in CoreTools.VersionStringToStruct at line 726. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- REDACTED`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.PackageEngine.Managers.Scoop/Scoop.cs src/UniGetUI.PackageEngine.Managers.Scoop/Scoop.cs:403 — src/UniGetUI.PackageEngine.Managers.Scoop/Scoop.cs changed 10 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 20 in Scoop.ParseAvailableUpdates at line 403. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.PackageEngine.Managers.Scoop/Scoop.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:286 — src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs changed 10 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 19 in InstallOptionsViewModel.InstallOptionsViewModel.ctor at line 286. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.Interface.IpcApi/IpcCliCommandRunner.cs src/UniGetUI.Interface.IpcApi/IpcCliCommandRunner.cs:19 — src/UniGetUI.Interface.IpcApi/IpcCliCommandRunner.cs changed 2 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 92 in IpcCliCommandRunner.RunAsync at line 19. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.Interface.IpcApi/IpcCliCommandRunner.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/NativeWinGetHelper.cs src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/NativeWinGetHelper.cs:300 — src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/NativeWinGetHelper.cs changed 12 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 15 in NativeWinGetHelper.FindPackages_UnSafe at line 300. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/NativeWinGetHelper.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs:120 — src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs changed 10 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 17 in BaseNuGet.FindPackages_UnSafe at line 120. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.Tui/Views/Dialogs/InstallOptionsDialog.cs src/UniGetUI.Tui/Views/Dialogs/InstallOptionsDialog.cs:130 — src/UniGetUI.Tui/Views/Dialogs/InstallOptionsDialog.cs changed 4 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 40 in InstallOptionsDialog.Build at line 130. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.Tui/Views/Dialogs/InstallOptionsDialog.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.Avalonia/Views/SoftwarePages/CatalogEditorPage.cs src/UniGetUI.Avalonia/Views/SoftwarePages/CatalogEditorPage.cs:299 — src/UniGetUI.Avalonia/Views/SoftwarePages/CatalogEditorPage.cs changed 6 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 25 in CatalogEditorPage.PinVersionAsync at line 299. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.Avalonia/Views/SoftwarePages/CatalogEditorPage.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.PackageEngine.Operations/AbstractProcessOperation.cs src/UniGetUI.PackageEngine.Operations/AbstractProcessOperation.cs:109 — src/UniGetUI.PackageEngine.Operations/AbstractProcessOperation.cs changed 5 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 29 in AbstractProcessOperation.PerformOperation at line 109. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.PackageEngine.Operations/AbstractProcessOperation.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.PackageEngine.Managers.PowerShell/Helpers/PowerShellPkgOperationHelper.cs src/UniGetUI.PackageEngine.Managers.PowerShell/Helpers/PowerShellPkgOperationHelper.cs:21 — src/UniGetUI.PackageEngine.Managers.PowerShell/Helpers/PowerShellPkgOperationHelper.cs changed 4 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 34 in PowerShellPkgOperationHelper._getOperationParameters at line 21. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.PackageEngine.Managers.PowerShell/Helpers/PowerShellPkgOperationHelper.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.PackageEngine.Operations/DownloadOperation.cs src/UniGetUI.PackageEngine.Operations/DownloadOperation.cs:200 — src/UniGetUI.PackageEngine.Operations/DownloadOperation.cs changed 4 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 29 in DownloadOperation.PerformOperation at line 200. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.PackageEngine.Operations/DownloadOperation.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.PackageEngine.Managers.Scoop/Helpers/ScoopPkgDetailsHelper.cs src/UniGetUI.PackageEngine.Managers.Scoop/Helpers/ScoopPkgDetailsHelper.cs:35 — src/UniGetUI.PackageEngine.Managers.Scoop/Helpers/ScoopPkgDetailsHelper.cs changed 5 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 23 in ScoopPkgDetailsHelper.GetDetails_UnSafe at line 35. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.PackageEngine.Managers.Scoop/Helpers/ScoopPkgDetailsHelper.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • Hotspot: src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationViewModel.cs src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationViewModel.cs:242 — src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationViewModel.cs changed 6 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 18 in OperationViewModel.RebuildMenu at line 242. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-08-13..2026-11-11, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-08-13 16:31:41 -05:00' --until='2026-11-11 16:31:41 -05:00' --full-history --no-merges -- src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationViewModel.cs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
  • + 15 more in this group — see findings.md.
GD1 · Unfinished & placeholder code · Unfinished stub · ×40
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Homebrew/Helpers/HomebrewPkgDetailsHelper.cs:99 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Homebrew/Helpers/HomebrewPkgDetailsHelper.cs:102 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:111 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:114 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:125 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:127 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:130 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:132 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:134 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:136 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:138 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:140 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:143 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:148 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:150 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:153 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:156 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:162 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:168 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:173 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:175 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:178 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:180 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:183 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:194 — A shipped member still throws NotImplementedException — generated scaffolding that was never completed. Implement it or remove the dead surface.
  • + 15 more in this group — see findings.md.
PF3 · Async & latency hygiene · Sync-over-async blocking · ×40
  • Sync-over-async blocking — 65 blocking call(s) on async work (.Wait()/.GetAwaiter().GetResult()) — these waste a thread and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.Avalonia/Views/DialogPages/CrashReportWindow.axaml.cs:58 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/Shared/SharedPreUiCommandDispatcher.cs:265 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/Shared/SharedPreUiCommandDispatcher.cs:283 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:1954 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.Avalonia/Infrastructure/AvaloniaBootstrapper.cs:221 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.Avalonia/Infrastructure/AvaloniaBootstrapper.cs:223 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.Avalonia/Infrastructure/AvaloniaBootstrapper.cs:225 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.Avalonia/Infrastructure/AvaloniaBootstrapper.cs:227 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.Avalonia/Infrastructure/AvaloniaBootstrapper.cs:229 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.Avalonia/Infrastructure/SingleInstanceRedirector.cs:66 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.Avalonia/Infrastructure/SingleInstanceRedirector.cs:141 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.AgentSkills.Cli/Notion.cs:182 — `ws.Wait()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.AgentSkills.Cli/Notion.cs:245 — `wsTask.Wait()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.AgentSkills/Http.cs:87 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.AgentSkills/Proc.cs:125 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.AgentSkills/Proc.cs:126 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.AgentSkills/Proc.cs:147 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.Core.Classes/TaskRecycler.cs:78 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.Core.Classes/TaskRecycler.cs:84 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.Core.Classes/TaskRecycler.cs:91 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.Core.Classes/TaskRecycler.cs:99 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.Core.Data/CoreData.cs:517 — `.Wait()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.Core.Tools/IntegrityTester.cs:41 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • Sync-over-async blocking src/UniGetUI.Core.Tools/ShortcutFileRemover.cs:203 — `.GetAwaiter().GetResult()` blocks this thread until the async work completes — it wastes a thread-pool thread for as long as the work runs and can deadlock wherever a synchronization context is in play (a UI thread, or a caller that has one).
  • + 15 more in this group — see findings.md.
D3 · God Classes · FileTooLong · ×39
  • FileTooLong: Views/MainWindow.axaml.cs src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs — FileTooLong — 1484 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 984 over it, 2.97× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: Infrastructure/AvaloniaAutoUpdater.cs src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs — FileTooLong — 1297 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 797 over it, 2.59× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: REDACTED REDACTED — FileTooLong — 1242 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 742 over it, 2.48× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: REDACTED REDACTED — FileTooLong — 1232 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 732 over it, 2.46× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: UniGetUI.PackageEngine.Operations/PackageOperations.cs src/UniGetUI.PackageEngine.Operations/PackageOperations.cs — FileTooLong — 1169 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 669 over it, 2.34× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: Pages/PackageListPage.cs src/UniGetUI.Tui/Views/Pages/PackageListPage.cs — FileTooLong — 1075 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 575 over it, 2.15× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: PolicyEditor/PolicyEditorSessionViewModel.cs src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs — FileTooLong — 1005 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 505 over it, 2.01× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: Pages/AgentSkillsViewModel.cs src/UniGetUI.Avalonia/ViewModels/Pages/AgentSkillsViewModel.cs — FileTooLong — 1002 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 502 over it, 2.00× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: UniGetUI.Interface.IpcApi/IpcClient.cs src/UniGetUI.Interface.IpcApi/IpcClient.cs — FileTooLong — 958 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 458 over it, 1.92× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: SoftwarePages/PackagesPageViewModel.cs src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs — FileTooLong — 920 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 420 over it, 1.84× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: PolicyEditor/PolicyEditorStructuredUi.cs src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorStructuredUi.cs — FileTooLong — 868 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 368 over it, 1.74× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: UniGetUI.PackageEngine.Managers.Pip/Pip.cs src/UniGetUI.PackageEngine.Managers.Pip/Pip.cs — FileTooLong — 811 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 311 over it, 1.62× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: ViewModels/MainWindowViewModel.cs src/UniGetUI.Avalonia/ViewModels/MainWindowViewModel.cs — FileTooLong — 800 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 300 over it, 1.60× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: ClientHelpers/NativeWinGetHelper.cs src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/NativeWinGetHelper.cs — FileTooLong — 777 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 277 over it, 1.55× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: Pages/GitRepositoriesViewModel.cs src/UniGetUI.Avalonia/ViewModels/Pages/GitRepositoriesViewModel.cs — FileTooLong — 767 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 267 over it, 1.53× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: Classes/StartMenuShortcutsDatabase.cs src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs — FileTooLong — 749 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 249 over it, 1.50× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: DialogPages/PackageDetailsWindow.axaml.cs src/UniGetUI.Avalonia/Views/DialogPages/PackageDetailsWindow.axaml.cs — FileTooLong — 743 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 243 over it, 1.49× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: UniGetUI.PackageEngine.Managers.WinGet/WinGet.cs src/UniGetUI.PackageEngine.Managers.WinGet/WinGet.cs — FileTooLong — 703 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 203 over it, 1.41× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: Internal/NuGetV3Client.cs src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs — FileTooLong — 689 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 189 over it, 1.38× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: Manager/PackageManager.cs src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/PackageManager.cs — FileTooLong — 679 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 179 over it, 1.36× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: SettingsPages/AgentPolicyInspectorViewModel.cs src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/AgentPolicyInspectorViewModel.cs — FileTooLong — 661 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 161 over it, 1.32× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: SoftwarePages/AbstractPackagesPage.axaml.cs src/UniGetUI.Avalonia/Views/SoftwarePages/AbstractPackagesPage.axaml.cs — FileTooLong — 651 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 151 over it, 1.30× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: UniGetUI.Interface.IpcApi/IpcCliCommandRunner.cs src/UniGetUI.Interface.IpcApi/IpcCliCommandRunner.cs — FileTooLong — 649 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 149 over it, 1.30× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: Views/MainWindow.cs src/UniGetUI.Tui/Views/MainWindow.cs — FileTooLong — 643 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 143 over it, 1.29× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: Models/PackageCollections.cs src/UniGetUI.Avalonia/Models/PackageCollections.cs — FileTooLong — 638 significant lines (blank, comment-only and punctuation-only lines excluded). The bar is 500 significant lines; this is 138 over it, 1.28× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • + 14 more in this group — see findings.md.
D29 · Static Analysis (SAST) · REDACTED · ×38
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • + 13 more in this group — see findings.md.
IC1 · Incompleteness & stubs · Unfinished stub · ×33
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Apt/Helpers/AptPkgDetailsHelper.cs:119 — `GetIcon_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Apt/Helpers/AptPkgDetailsHelper.cs:122 — `GetScreenshots_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Cargo/Helpers/CargoPkgDetailsHelper.cs:74 — `GetIcon_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Cargo/Helpers/CargoPkgDetailsHelper.cs:79 — `GetScreenshots_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Dnf/Helpers/DnfPkgDetailsHelper.cs:102 — `GetIcon_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Dnf/Helpers/DnfPkgDetailsHelper.cs:105 — `GetScreenshots_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Flatpak/Helpers/FlatpakPkgDetailsHelper.cs:75 — `GetIcon_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGetDetailsHelper.cs:570 — `GetScreenshots_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Homebrew/Helpers/HomebrewPkgDetailsHelper.cs:99 — `GetIcon_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Homebrew/Helpers/HomebrewPkgDetailsHelper.cs:102 — `GetScreenshots_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Npm/Helpers/NpmPkgDetailsHelper.cs:165 — `GetIcon_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Npm/Helpers/NpmPkgDetailsHelper.cs:170 — `GetScreenshots_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Pacman/Helpers/PacmanPkgDetailsHelper.cs:123 — `GetIcon_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Pacman/Helpers/PacmanPkgDetailsHelper.cs:126 — `GetScreenshots_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Pip/Helpers/PipPkgDetailsHelper.cs:126 — `GetIcon_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Pip/Helpers/PipPkgDetailsHelper.cs:131 — `GetScreenshots_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Scoop/Helpers/ScoopPkgDetailsHelper.cs:278 — `GetIcon_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Scoop/Helpers/ScoopPkgDetailsHelper.cs:283 — `GetScreenshots_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Snap/Helpers/SnapPkgDetailsHelper.cs:118 — `GetIcon_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Vcpkg/Helpers/VcpkgPkgDetailsHelper.cs:95 — `GetIcon_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Vcpkg/Helpers/VcpkgPkgDetailsHelper.cs:100 — `GetScreenshots_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Vcpkg/Helpers/VcpkgPkgDetailsHelper.cs:123 — `GetInstallableVersions_UnSafe` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Vcpkg/Helpers/VcpkgSourceHelper.cs:13 — `GetAddSourceParameters` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Vcpkg/Helpers/VcpkgSourceHelper.cs:16 — `GetRemoveSourceParameters` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • Unfinished stub — throws NotImplementedException src/UniGetUI.PackageEngine.Managers.Vcpkg/Helpers/VcpkgSourceHelper.cs:19 — `_getAddSourceOperationVeredict` is a shipped member whose whole body throws NotImplementedException — scaffolding that was never completed. Implement it or remove the dead surface.
  • + 8 more in this group — see findings.md.
X2 · Cancellation propagation · Async method without CancellationToken · ×33
  • Async method without CancellationToken: ResumeStartupAfterMacOSEnvironment src/UniGetUI.Avalonia/App.axaml.cs:151 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: StartupAsync src/UniGetUI.Avalonia/App.axaml.cs:291 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: LoadAndCacheIconAsync src/UniGetUI.Avalonia/Models/PackageCollections.cs:903 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: LoadIconAsync src/UniGetUI.Avalonia/Models/PackageRowModel.cs:162 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: SaveWithAdminRightsAsync src/UniGetUI.Avalonia/Models/SoftwareCatalog.cs:104 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: SaveAsync src/UniGetUI.Avalonia/Models/SoftwareCatalog.cs:118 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: LoadAsync src/UniGetUI.Avalonia/Models/SoftwareCatalog.cs:160 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: LoginAsync src/UniGetUI.Avalonia/ViewModels/Controls/UserAvatarViewModel.cs:138 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: LoadAsync src/UniGetUI.Avalonia/ViewModels/DialogPages/CatalogEditorViewModel.cs:270 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: SaveAsync src/UniGetUI.Avalonia/ViewModels/DialogPages/CatalogEditorViewModel.cs:310 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: LoadIgnoredUpdatesAsync src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:487 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: ApplyIgnoredUpdatesAsync src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:493 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: RefreshCommandPreviewAsync src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:550 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: RefreshBrokerNoticesAsync src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:568 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: BuildCurrentCommandAsync src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:655 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: LoadIconAsync src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:681 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: LoadVersionsAsync src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:705 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: InitializeAsync src/UniGetUI.Avalonia/ViewModels/DialogPages/ManageAutoUpdatesViewModel.cs:71 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: LoadIconAsync src/UniGetUI.Avalonia/ViewModels/DialogPages/ManageAutoUpdatesViewModel.cs:317 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: ResetAll src/UniGetUI.Avalonia/ViewModels/DialogPages/ManageIgnoredUpdatesViewModel.cs:119 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: Remove src/UniGetUI.Avalonia/ViewModels/DialogPages/ManageIgnoredUpdatesViewModel.cs:205 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: Update src/UniGetUI.Avalonia/ViewModels/DialogPages/ManageIgnoredUpdatesViewModel.cs:208 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: RemoveAsync src/UniGetUI.Avalonia/ViewModels/DialogPages/ManageIgnoredUpdatesViewModel.cs:287 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: RestoreToUpdatesAsync src/UniGetUI.Avalonia/ViewModels/DialogPages/ManageIgnoredUpdatesViewModel.cs:294 — No CancellationToken parameter — this work can't be stopped early once started.
  • Async method without CancellationToken: LoadIconAsync src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationViewModel.cs:159 — No CancellationToken parameter — this work can't be stopped early once started.
  • + 8 more in this group — see findings.md.
AX2 · Stateful singletons · Process-global static state · ×30
  • Process-global static state: App src/UniGetUI.Avalonia/App.axaml.cs:29 — `App` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_terminationSignalsReceived, _terminationSignals; e.g. `_terminationSignalsReceived` at line 270). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: StartMenuLocation src/UniGetUI.Avalonia/ViewModels/DialogPages/ManageShortcutsViewModel.cs:385 — `StartMenuLocation` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_roots; e.g. `_roots` at line 389). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: SmoothScrollManager src/UniGetUI.Avalonia/Views/Controls/SmoothScrollManager.cs:22 — `SmoothScrollManager` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_classHandler; e.g. `_classHandler` at line 75). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: InstalledPackagesPage src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:23 — `InstalledPackagesPage` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_hasBackedUp; e.g. `_hasBackedUp` at line 69). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: AvaloniaOperationRegistry src/UniGetUI.Avalonia/Infrastructure/AvaloniaOperationRegistry.cs:25 — `AvaloniaOperationRegistry` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_shortcutDialogOpen; e.g. `_shortcutDialogOpen` at line 368). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: MicaWindowHelper src/UniGetUI.Avalonia/Infrastructure/MicaWindowHelper.cs:21 — `MicaWindowHelper` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_acrylicPopupsHooked, _micaConfirmedUnavailable; e.g. `_acrylicPopupsHooked` at line 58). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: MemoryTrimmer src/UniGetUI.Avalonia/Infrastructure/MemoryTrimmer.cs:12 — `MemoryTrimmer` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_timer; e.g. `_timer` at line 26). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: MaintenanceScheduler src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:10 — `MaintenanceScheduler` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_started, _timer, _isHeadless, _headlessTimer, _pendingInstallSince, _pendingCheckSince; e.g. `_started` at line 39). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: AvaloniaAutoUpdater src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:28 — `AvaloniaAutoUpdater` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (PendingUpdate, _pendingInstallerPath, ReleaseLockForAutoupdate_Notification, InstallerLaunched; e.g. `PendingUpdate` at line 86). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: AvaloniaBootstrapper src/UniGetUI.Avalonia/Infrastructure/AvaloniaBootstrapper.cs:24 — `AvaloniaBootstrapper` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_hasStarted, _brokerUnavailableDialogActive, _ipcApi; e.g. `_hasStarted` at line 44). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: SingleInstanceRedirector src/UniGetUI.Avalonia/Infrastructure/SingleInstanceRedirector.cs:19 — `SingleInstanceRedirector` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_listener; e.g. `_listener` at line 52). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: WindowsAvaloniaRenderingPolicy src/UniGetUI.Avalonia/Infrastructure/WindowsAvaloniaRenderingPolicy.cs:11 — `WindowsAvaloniaRenderingPolicy` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_shouldUseSoftwareRendering, _hasHardwareGpu; e.g. `_shouldUseSoftwareRendering` at line 30). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: Ui src/UniGetUI.AgentSkills.Cli/Ui.cs:33 — `Ui` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_cursorHidden; e.g. `_cursorHidden` at line 421). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: CoreData src/UniGetUI.Core.Data/CoreData.cs:7 — `CoreData` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (__code_page, __console_encoding, _sanitizedProcessArguments; e.g. `__code_page` at line 16). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: LanguageData src/UniGetUI.Core.LanguageEngine/LanguageData.cs:10 — `LanguageData` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (__translators_list, __language_reference, __translation_percentages; e.g. `__translators_list` at line 20). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: AppPaths src/UniGetUI.Core.Logger/AppPaths.cs:7 — `AppPaths` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (__installation_directory, __elevated_temp_directory; e.g. `__installation_directory` at line 43). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: Logger src/UniGetUI.Core.Logger/Logger.cs:5 — `Logger` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (LogContents; e.g. `LogContents` at line 37). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: DWMThreadHelper src/UniGetUI.Core.Tools/DWMThreadHelper.cs:8 — `DWMThreadHelper` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (DWMThreadAdress, DWM_IsSuspended, DWMThreadId, XAMLThreadAdress, XAML_IsSuspended, XAMLThreadId; e.g. `DWMThreadAdress` at line 67). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: CoreTools REDACTED:26 — `CoreTools` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (LanguageEngine; e.g. `LanguageEngine` at line 88). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: TelemetryHandler src/UniGetUI.Interface.Telemetry/TelemetryHandler.cs:34 — `TelemetryHandler` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_openSearchUsername, _openSearchPassword, _credentialsWarningLogged, TestSendAsyncOverride, _platformInfo; e.g. `_openSearchUsername` at line 44). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: StartMenuShortcutsDatabase src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs:9 — `StartMenuShortcutsDatabase` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (_testUserPrograms, _cachedRoots, _testCommonPrograms; e.g. `_testUserPrograms` at line 46). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: WinGet src/UniGetUI.PackageEngine.Managers.WinGet/WinGet.cs:22 — `WinGet` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (NO_PACKAGES_HAVE_BEEN_LOADED; e.g. `NO_PACKAGES_HAVE_BEEN_LOADED` at line 357). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: WinGetIconsHelper src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetIconsHelper.cs:15 — `WinGetIconsHelper` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (__msstore_package_manifests; e.g. `__msstore_package_manifests` at line 55). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: BaseNuGet src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs:20 — `BaseNuGet` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (Manifests; e.g. `Manifests` at line 255). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • Process-global static state: FakeDataEnvironment src/UniGetUI.Tui/FakeData/FakeDataEnvironment.cs:15 — `FakeDataEnvironment` keeps mutable `static` state — one slot for the whole process, shared by every thread that reaches the type however its instances are created — and mutates it outside any lock (Current; e.g. `Current` at line 96). Concurrent callers lose updates, and a collection that is not built for concurrent writers can corrupt.
  • + 5 more in this group — see findings.md.
P7 · Outbound HTTP resilience · Outbound HTTP without resilience · ×29
  • Outbound HTTP without resilience src/UniGetUI.AgentSkills/Http.cs:44 — `new(new SocketsHttpHandler { AllowAutoRedirect = true, MaxAutomaticRedirectio...` builds an outbound HTTP client, and what is applied to it does not bound it. Its `Timeout` is set to `Timeout.InfiniteTimeSpan`, which removes HttpClient's own bound rather than setting one. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.Avalonia/ViewModels/Controls/UserAvatarViewModel.cs:94 — `new HttpClient(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:676 — `new(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationViewModel.cs:167 — `new HttpClient(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.Avalonia/ViewModels/DialogPages/PackageDetailsViewModel.cs:326 — `new HttpClient(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.Avalonia/ViewModels/DialogPages/PackageDetailsViewModel.cs:363 — `new HttpClient(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.Avalonia/ViewModels/Pages/AboutPages/ContributorsViewModel.cs:31 — `new HttpClient(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.Avalonia/ViewModels/Pages/AboutPages/TranslatorsViewModel.cs:33 — `new HttpClient(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/BackupViewModel.cs:245 — `new HttpClient(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.Core.IconStore/IconCacheEngine.cs:236 — `new(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.Core.IconStore/IconDatabase.cs:75 — `new(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience REDACTED:506 — `new(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience REDACTED:529 — `new(handler)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.Interface.IpcApi/GitHubApiClient.cs:18 — `new HttpClient(CoreTools.GenericHttpClientParameters) { BaseAddress = GitHubA...` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.Interface.IpcApi/IpcClient.cs:1565 — `new HttpClient(handler) { BaseAddress = options.BaseAddress, Timeout = Timeou...` builds an outbound HTTP client, and what is applied to it does not bound it. Its `Timeout` is set to `Timeout.InfiniteTimeSpan`, which removes HttpClient's own bound rather than setting one. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.Interface.IpcApi/IpcClient.cs:1572 — `new HttpClient { BaseAddress = options.BaseAddress, Timeout = Timeout.Infinit...` builds an outbound HTTP client, and what is applied to it does not bound it. Its `Timeout` is set to `Timeout.InfiniteTimeSpan`, which removes HttpClient's own bound rather than setting one. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.PackageEngine.Managers.Bun/Bun.cs:81 — `new(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience REDACTED:132 — `new(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.PackageEngine.Managers.Generic.InstallerFeeds/FeedListing.cs:141 — `new HttpClient(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.PackageEngine.Managers.Generic.InstallerFeeds/FeedStaging.cs:27 — `new HttpClient(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs:178 — `new(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs:570 — `new(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGetDetailsHelper.cs:617 — `new(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetManifestLoader.cs:108 — `new(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • Outbound HTTP without resilience src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs:67 — `new(CoreTools.GenericHttpClientParameters)` builds an outbound HTTP client and nothing bounds it: no timeout is set on it and no retry or resilience policy wraps its calls in the type that owns it. A slow or failing dependency will hold this service's request, thread or connection — and cascade — until the call gives up on its own (100 s for HttpClient's default).
  • + 4 more in this group — see findings.md.
X3 · Exception handling · Swallowed exception (empty catch) · ×28
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/App.axaml.cs:307 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/CrashHandler.cs:168 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/CrashHandler.cs:263 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/CrashHandler.cs:278 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/Models/PackageRowModel.cs:184 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/Program.cs:44 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationViewModel.cs:184 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationViewModel.cs:192 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/ViewModels/DialogPages/PackageDetailsViewModel.cs:350 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/ViewModels/DialogPages/PackageDetailsViewModel.cs:378 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/ViewModels/DialogPages/PackageDetailsViewModel.cs:396 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/ViewModels/Pages/AboutPages/ContributorsViewModel.cs:36 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/ViewModels/Pages/AboutPages/TranslatorsViewModel.cs:38 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:1136 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/Views/Controls/SvgIcon.cs:157 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/Views/Controls/SvgIcon.cs:175 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/Views/DialogPages/CrashReportWindow.axaml.cs:60 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:1508 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/Shared/AutoUpdater.Helpers.cs:504 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/Shared/AutoUpdater.Helpers.cs:539 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/Shared/AutoUpdater.Helpers.cs:691 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/Infrastructure/MicaWindowHelper.cs:187 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:174 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:282 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • Swallowed exception (empty catch) src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:1660 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
  • + 3 more in this group — see findings.md.
X1 · Async correctness · async void method · ×27
  • async void method: ResumeStartupAfterMacOSEnvironment src/UniGetUI.Avalonia/App.axaml.cs:151 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: OnOperationFinished src/UniGetUI.Avalonia/ViewModels/DialogPages/ManageIgnoredUpdatesViewModel.cs:260 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: HandleNotificationActivation src/UniGetUI.Avalonia/ViewModels/MainWindowViewModel.cs:1207 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: SendReport_Click src/UniGetUI.Avalonia/Views/DialogPages/CrashReportWindow.axaml.cs:24 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: SelectDir_Click src/UniGetUI.Avalonia/Views/DialogPages/InstallOptionsControl.axaml.cs:118 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: Manual_Click src/UniGetUI.Avalonia/Views/DialogPages/InstallOptionsControl.axaml.cs:135 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: OnAttachedToVisualTree src/UniGetUI.Avalonia/Views/Pages/AgentSkillsPage.axaml.cs:43 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: LibraryViewChanged src/UniGetUI.Avalonia/Views/Pages/AgentSkillsPage.axaml.cs:110 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: ContentTypeChanged src/UniGetUI.Avalonia/Views/Pages/AgentSkillsPage.axaml.cs:117 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: ToolFilterChanged src/UniGetUI.Avalonia/Views/Pages/AgentSkillsPage.axaml.cs:124 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: CatalogKeyDown src/UniGetUI.Avalonia/Views/Pages/AgentSkillsPage.axaml.cs:130 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: UninstallClicked src/UniGetUI.Avalonia/Views/Pages/AgentSkillsPage.axaml.cs:147 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: SourceInputKeyDown src/UniGetUI.Avalonia/Views/Pages/AgentSkillsPage.axaml.cs:157 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: MarketplaceKeyDown src/UniGetUI.Avalonia/Views/Pages/AgentSkillsPage.axaml.cs:164 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: IdentifierKeyDown src/UniGetUI.Avalonia/Views/Pages/AgentSkillsPage.axaml.cs:171 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: OnCopyTextRequested src/UniGetUI.Avalonia/Views/Pages/LogPages/BaseLogPage.axaml.cs:46 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: OnExportTextRequested src/UniGetUI.Avalonia/Views/Pages/LogPages/BaseLogPage.axaml.cs:53 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: OnClearRequested src/UniGetUI.Avalonia/Views/Pages/LogPages/OperationHistoryPage.axaml.cs:199 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: OnCopyTextRequested src/UniGetUI.Avalonia/Views/Pages/SettingsPages/AgentPolicyInspector.axaml.cs:36 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: OnOpenPolicyEditorRequested src/UniGetUI.Avalonia/Views/Pages/SettingsPages/AgentPolicyInspector.axaml.cs:58 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: StructuredModeButton_Click src/UniGetUI.Avalonia/Views/Pages/SettingsPages/PolicyEditor/PolicyEditorDialog.axaml.cs:68 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: RuleDecision_SelectionChanged src/UniGetUI.Avalonia/Views/Pages/SettingsPages/PolicyEditor/PolicyEditorDialog.axaml.cs:148 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: Page_NavigationRequested src/UniGetUI.Avalonia/Views/Pages/SettingsPages/SettingsBasePage.axaml.cs:111 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: AnimateOverlayFilterPane src/UniGetUI.Avalonia/Views/SoftwarePages/AbstractPackagesPage.axaml.cs:789 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • async void method: AnimateInlineFilterPane src/UniGetUI.Avalonia/Views/SoftwarePages/AbstractPackagesPage.axaml.cs:909 — `async void` can't be awaited and its exceptions crash the process instead of propagating. Return `Task` — or, where the delegate contract requires void (timer/event/callback registrations), make this a thin void shim that awaits a Task-returning inner method inside try/catch so exceptions are contained.
  • + 2 more in this group — see findings.md.
D3 · God Classes · MethodTooLong · ×26
  • MethodTooLong: IpcCliCommandRunner.RunAsync src/UniGetUI.Interface.IpcApi/IpcCliCommandRunner.cs:19 — MethodTooLong — RunAsync runs 414 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 314 over it, 4.14× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: AddCommand.RunInner src/UniGetUI.AgentSkills.Cli/AddRun.cs:192 — MethodTooLong — RunInner runs 311 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 211 over it, 3.11× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: IpcServer.Start REDACTED:68 — MethodTooLong — Start runs 223 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 123 over it, 2.23× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: PolicyEditorSessionViewModel.SaveCoreAsync src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:509 — MethodTooLong — SaveCoreAsync runs 218 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 118 over it, 2.18× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: SearchMultiselect.Run src/UniGetUI.AgentSkills.Cli/SearchMultiselect.cs:136 — MethodTooLong — Run runs 214 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 114 over it, 2.14× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: AvaloniaAutoUpdater.CheckAndInstallUpdatesCoreAsync src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:525 — MethodTooLong — CheckAndInstallUpdatesCoreAsync runs 171 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 71 over it, 1.71× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: DownloadOperation.PerformOperation src/UniGetUI.PackageEngine.Operations/DownloadOperation.cs:200 — MethodTooLong — PerformOperation runs 161 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 61 over it, 1.61× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: PackageManagerPage.BuildExtraControls src/UniGetUI.Avalonia/Views/Pages/SettingsPages/PackageManagerPage.axaml.cs:408 — MethodTooLong — BuildExtraControls runs 142 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 42 over it, 1.42× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: SyncCommand.Run src/UniGetUI.AgentSkills.Cli/Sync.cs:112 — MethodTooLong — Run runs 130 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 30 over it, 1.30× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: BaseNuGetDetailsHelper.GetDetails_UnSafe src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGetDetailsHelper.cs:23 — MethodTooLong — GetDetails_UnSafe runs 129 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 29 over it, 1.29× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: AbstractOperation.MainThreadCore src/UniGetUI.PackageEngine.Operations/AbstractOperation.cs:309 — MethodTooLong — MainThreadCore runs 128 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 28 over it, 1.28× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: UpdateCommand.UpdateProjectSkills src/UniGetUI.AgentSkills.Cli/Update.cs:529 — MethodTooLong — UpdateProjectSkills runs 125 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 25 over it, 1.25× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: AbstractPackagesPage.AbstractPackagesPage(…) src/UniGetUI.Avalonia/Views/SoftwarePages/AbstractPackagesPage.axaml.cs:48 — MethodTooLong — AbstractPackagesPage(…) runs 125 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 25 over it, 1.25× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: InstallOptionsDialog.Build src/UniGetUI.Tui/Views/Dialogs/InstallOptionsDialog.cs:130 — MethodTooLong — Build runs 124 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 24 over it, 1.24× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: PackageManagerPage.BuildPage src/UniGetUI.Avalonia/Views/Pages/SettingsPages/PackageManagerPage.axaml.cs:59 — MethodTooLong — BuildPage runs 122 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 22 over it, 1.22× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: CargoInstallTracker.InstallAsync src/UniGetUI.PackageEngine.Managers.Cargo/CargoInstallTracker.cs:85 — MethodTooLong — InstallAsync runs 119 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 19 over it, 1.19× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: BundleImportFilter.Apply src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/BundleImportFilter.cs:21 — MethodTooLong — Apply runs 118 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 18 over it, 1.18× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: AvaloniaAutoUpdater.PrepareAndLaunchAsync src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:802 — MethodTooLong — PrepareAndLaunchAsync runs 116 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 16 over it, 1.16× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: UpdaterDownloadEngine.DownloadInstallerPartAsync src/UniGetUI.Core.Tools/UpdaterDownloadEngine.cs:102 — MethodTooLong — DownloadInstallerPartAsync runs 114 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 14 over it, 1.14× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: AbstractOperation._runOperation src/UniGetUI.PackageEngine.Operations/AbstractOperation.cs:537 — MethodTooLong — _runOperation runs 111 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 11 over it, 1.11× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: SoftwareUpdatesPage.GenerateContextMenu src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:132 — MethodTooLong — GenerateContextMenu runs 110 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 10 over it, 1.10× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: MainWindow.OnWindowsWndProc src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:1512 — MethodTooLong — OnWindowsWndProc runs 106 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 6 over it, 1.06× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: ScoopPkgDetailsHelper.GetDetails_UnSafe src/UniGetUI.PackageEngine.Managers.Scoop/Helpers/ScoopPkgDetailsHelper.cs:35 — MethodTooLong — GetDetails_UnSafe runs 106 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 6 over it, 1.06× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: UpdateCommand.UpdateGlobalSkills src/UniGetUI.AgentSkills.Cli/Update.cs:302 — MethodTooLong — UpdateGlobalSkills runs 104 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 4 over it, 1.04× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • MethodTooLong: MainWindowViewModel.MainWindowViewModel(…) src/UniGetUI.Avalonia/ViewModels/MainWindowViewModel.cs:506 — MethodTooLong — MainWindowViewModel(…) runs 103 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 3 over it, 1.03× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • + 1 more in this group — see findings.md.
X13 · Undrained process stream · Redirected process stream is never drained (deadlock) · ×19
  • Redirected process stream is never drained (deadlock) src/UniGetUI.PackageEngine.Managers.Homebrew/Homebrew.cs:161 — `RedirectStandardOutput` is set here, but `StandardOutput` is not being read when the code waits for the child to exit — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardOutput pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginOutputReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume.
  • Redirected process stream is never drained (deadlock) src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:82 — `RedirectStandardOutput` is set here, but `StandardOutput` is not being read when the code waits for the child to exit — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardOutput pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginOutputReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume.
  • Redirected process stream is never drained (deadlock) src/UniGetUI.PackageEngine.Managers.Apt/Helpers/AptPkgDetailsHelper.cs:131 — `RedirectStandardError` is set here, but `StandardError` is not being read when `StandardOutput` is read to the end — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardError pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginErrorReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume.
  • Redirected process stream is never drained (deadlock) src/UniGetUI.PackageEngine.Managers.Bun/Bun.cs:271 — `RedirectStandardError` is set here, but `StandardError` is not being read when `StandardOutput` is read to the end — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardError pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginErrorReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume.
  • Redirected process stream is never drained (deadlock) src/UniGetUI.PackageEngine.Managers.Cargo/Cargo.cs:213 — `RedirectStandardError` is set here, but `StandardError` is not being read when `StandardOutput` is read to the end — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardError pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginErrorReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume.
  • Redirected process stream is never drained (deadlock) src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs:575 — `RedirectStandardError` is set here, but `StandardError` is not being read when `StandardOutput` is read to the end — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardError pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginErrorReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume.
  • Redirected process stream is never drained (deadlock) src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:90 — `RedirectStandardError` is set here, but `StandardError` is not being read when `StandardOutput` is read to the end — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardError pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginErrorReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume.
  • Redirected process stream is never drained (deadlock) src/UniGetUI.PackageEngine.Managers.Dnf/Helpers/DnfPkgDetailsHelper.cs:112 — `RedirectStandardError` is set here, but `StandardError` is not being read when `StandardOutput` is read to the end — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardError pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginErrorReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume.
  • Redirected process stream is never drained (deadlock) src/UniGetUI.PackageEngine.Managers.Dotnet/DotNet.cs:194 — `RedirectStandardOutput` is set here, but `StandardOutput` is not being read when the code waits for the child to exit — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardOutput pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginOutputReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume.
  • Redirected process stream is never drained (deadlock) src/UniGetUI.PackageEngine.Managers.Dotnet/DotNet.cs:214 — `RedirectStandardError` is set here, but `StandardError` is not being read when `StandardOutput` is read to the end — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardError pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginErrorReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume.
  • Redirected process stream is never drained (deadlock) src/UniGetUI.PackageEngine.Managers.Flatpak/Flatpak.cs:88 — `RedirectStandardOutput` is set here, but `StandardOutput` is not being read when `StandardError` is read to the end — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardOutput pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginOutputReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume.
  • Redirected process stream is never drained (deadlock) src/UniGetUI.PackageEngine.Managers.Pacman/Helpers/PacmanPkgDetailsHelper.cs:133 — `RedirectStandardError` is set here, but `StandardError` is not being read when `StandardOutput` is read to the end — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardError pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginErrorReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume.
  • Redirected process stream is never drained (deadlock) src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs:82 — `RedirectStandardError` is set here, but `StandardError` is not being read when `StandardOutput` is read to the end — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardError pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginErrorReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume.
  • Redirected process stream is never drained (deadlock) src/UniGetUI.PackageEngine.Managers.Pip/Pip.cs:1283 — `RedirectStandardError` is set here, but `StandardError` is not being read when `StandardOutput` is read to the end — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardError pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginErrorReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume.
  • Redirected process stream is never drained (deadlock) src/UniGetUI.PackageEngine.Managers.PowerShell/PowerShell.cs:175 — `RedirectStandardError` is set here, but `StandardError` is not being read when `StandardOutput` is read to the end — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardError pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginErrorReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume.
  • Redirected process stream is never drained (deadlock) src/UniGetUI.PackageEngine.Managers.PowerShell7/PowerShell7.cs:216 — `RedirectStandardError` is set here, but `StandardError` is not being read when `StandardOutput` is read to the end — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardError pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginErrorReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume.
  • Redirected process stream is never drained (deadlock) src/UniGetUI.PackageEngine.Managers.Scoop/Scoop.cs:829 — `RedirectStandardOutput` is set here, but `StandardOutput` is not being read when the code waits for the child to exit — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardOutput pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginOutputReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume.
  • Redirected process stream is never drained (deadlock) src/UniGetUI.PackageEngine.Managers.Snap/Snap.cs:86 — `RedirectStandardOutput` is set here, but `StandardOutput` is not being read when `StandardError` is read to the end — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardOutput pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginOutputReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume.
  • Redirected process stream is never drained (deadlock) src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/PingetPackageDetailsProvider.cs:166 — `RedirectStandardError` is set here, but `StandardError` is not being read when `StandardOutput` is read to the end — it is never read, read only later, or read only in part. The child blocks as soon as it fills the StandardError pipe (~4 KB, never more than 64 KB), so it never finishes and never exits, and the read or wait above never returns: a `WaitForExit` timeout after a read does not help: the timeout bounds the WAIT, not the read that precedes it. Drain every redirected stream before blocking on the child — read one on a background thread (`BeginErrorReadLine()` with its `DataReceived` handler, or a `Task` running `ReadToEndAsync()` started before the other read and awaited after it) — or stop redirecting the stream you do not consume.
D4 · Code Duplication · Duplicated block (5 lines × 2) · ×13
  • Duplicated block (5 lines × 2) src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:45 — src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:45-49 | src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/InstallOptionsPanelViewModel.cs:77-81 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice.
  • Duplicated block (5 lines × 2) src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs:630 — src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs:630-634 | src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs:654-658 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
  • Duplicated block (5 lines × 2) src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationOutputViewModel.cs:63 — src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationOutputViewModel.cs:63-67 | src/UniGetUI.Avalonia/Views/DialogPages/OperationFailedDialog.axaml.cs:76-80 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
  • Duplicated block (5 lines × 2) src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs:125 — src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs:125-129 | src/UniGetUI.Avalonia/ViewModels/SoftwarePages/SoftwareCatalogViewModel.cs:60-64 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
  • Duplicated block (5 lines × 2) src/UniGetUI.Avalonia/Views/Controls/Settings/CheckboxCard.cs:82 — src/UniGetUI.Avalonia/Views/Controls/Settings/CheckboxCard.cs:82-86 | src/UniGetUI.Avalonia/Views/Controls/Settings/SecureCheckboxCard.cs:71-75 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
  • Duplicated block (5 lines × 2) src/UniGetUI.Avalonia/Views/SoftwarePages/DiscoverSoftwarePage.cs:357 — src/UniGetUI.Avalonia/Views/SoftwarePages/DiscoverSoftwarePage.cs:357-361 | src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:359-363 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
  • Duplicated block (5 lines × 2) src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:351 — src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:351-355 | src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:391-395 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
  • Duplicated block (5 lines × 2) src/UniGetUI.AgentSkills.Cli/Preview.cs:234 — src/UniGetUI.AgentSkills.Cli/Preview.cs:234-238 | src/UniGetUI.AgentSkills.Cli/Validate.cs:206-210 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
  • Duplicated block (5 lines × 2) src/UniGetUI.Extensions.AgentSkills/ClaudePluginService.cs:29 — src/UniGetUI.Extensions.AgentSkills/ClaudePluginService.cs:29-33 | src/UniGetUI.Extensions.AgentSkills/CodexPluginService.cs:39-43 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
  • Duplicated block (5 lines × 2) src/UniGetUI.Extensions.AgentSkills/ClaudePluginService.cs:36 — src/UniGetUI.Extensions.AgentSkills/ClaudePluginService.cs:36-40 | src/UniGetUI.Extensions.AgentSkills/CodexPluginService.cs:46-50 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
  • Duplicated block (5 lines × 2) src/UniGetUI.PackageEngine.Managers.MacPkg/Helpers/MacPkgDetailsHelper.cs:53 — src/UniGetUI.PackageEngine.Managers.MacPkg/Helpers/MacPkgDetailsHelper.cs:53-57 | src/UniGetUI.PackageEngine.Managers.WinInstaller/Helpers/WinInstallerDetailsHelper.cs:48-52 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice.
  • Duplicated block (5 lines × 2) src/UniGetUI.PackageEngine.Managers.MacPkg/MacPkg.cs:77 — src/UniGetUI.PackageEngine.Managers.MacPkg/MacPkg.cs:77-81 | src/UniGetUI.PackageEngine.Managers.WinInstaller/WinInstaller.cs:75-79 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
  • Duplicated block (5 lines × 2) src/UniGetUI.Avalonia/Views/DialogPages/PackageDetailsWindow.axaml.cs:1034 — src/UniGetUI.Avalonia/Views/DialogPages/PackageDetailsWindow.axaml.cs:1034-1038 | src/UniGetUI.Avalonia/Views/DialogPages/PackageDetailsWindow.axaml.cs:1040-1044 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
D4 · Code Duplication · Duplicated block (8 lines × 2) · ×12
  • Duplicated block (8 lines × 2) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs:184 — src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs:184-191 | src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs:579-586 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs:184` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (8 lines × 2) src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:12 — src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:12-19 | src/UniGetUI.Tui/Infrastructure/TuiMaintenance.cs:19-26 — before extracting anything, compare `src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs` and `src/UniGetUI.Tui/Infrastructure/TuiMaintenance.cs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 49 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place.
  • Duplicated block (8 lines × 2) src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs:241 — src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs:241-248 | src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs:1065-1072 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs:241` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (8 lines × 2) src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:192 — src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:192-199 | src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:241-248 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:192` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
  • Duplicated block (8 lines × 2) src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs:195 — src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs:195-202 | src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs:236-243 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs:195` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (8 lines × 2) src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:408 — src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:408-415 | src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:457-464 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:408` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (8 lines × 2) src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:141 — src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:141-148 | src/UniGetUI.Tui/Infrastructure/TuiMaintenance.cs:138-145 — before extracting anything, compare `src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs` and `src/UniGetUI.Tui/Infrastructure/TuiMaintenance.cs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 49 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:141` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/UniGetUI.Tui/Infrastructure/TuiMaintenance.cs:146` calls `Error`, `Translate` and `src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:149` does not — after which the two agree again for 3 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
  • Duplicated block (8 lines × 2) src/UniGetUI.Interface.IpcApi/IpcManagerSettingsApi.cs:43 — src/UniGetUI.Interface.IpcApi/IpcManagerSettingsApi.cs:43-50 | src/UniGetUI.PackageEngine.Interfaces/ManagerHealth.cs:29-36 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice.
  • Duplicated block (8 lines × 2) src/UniGetUI.PackageEngine.Managers.MacPkg/MacPkg.cs:153 — src/UniGetUI.PackageEngine.Managers.MacPkg/MacPkg.cs:153-160 | src/UniGetUI.PackageEngine.Managers.WinInstaller/WinInstaller.cs:139-146 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
  • Duplicated block (8 lines × 2) src/UniGetUI.PackageEngine.Managers.Flatpak/Helpers/FlatpakPkgDetailsHelper.cs:40 — src/UniGetUI.PackageEngine.Managers.Flatpak/Helpers/FlatpakPkgDetailsHelper.cs:40-47 | src/UniGetUI.PackageEngine.Managers.Snap/Helpers/SnapPkgDetailsHelper.cs:71-78 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Flatpak/Helpers/FlatpakPkgDetailsHelper.cs:40` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
  • Duplicated block (8 lines × 2) src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:506 — src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:506-516 | src/UniGetUI.Tui/Views/Dialogs/InstallOptionsDialog.cs:294-301 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
  • Duplicated block (8 lines × 2) src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:44 — src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:44-51 | src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/PackageManager.cs:232-239 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
D4 · Code Duplication · Duplicated block (6 lines × 2) · ×12
  • Duplicated block (6 lines × 2) src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:424 — src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:424-429 | src/UniGetUI.Tui/Infrastructure/TuiPackageActions.cs:49-54 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
  • Duplicated block (6 lines × 2) src/UniGetUI.Interface.IpcApi/IpcBundleApi.cs:56 — src/UniGetUI.Interface.IpcApi/IpcBundleApi.cs:56-61 | src/UniGetUI.Interface.IpcApi/IpcPackageApi.cs:30-35 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
  • Duplicated block (6 lines × 2) src/UniGetUI.Interface.IpcApi/IpcPackageApi.cs:18 — src/UniGetUI.Interface.IpcApi/IpcPackageApi.cs:18-23 | src/UniGetUI.Interface.IpcApi/IpcPackageApi.cs:80-85 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
  • Duplicated block (6 lines × 2) src/UniGetUI.PackageEngine.Managers.Cargo/CargoInstallTracker.cs:271 — src/UniGetUI.PackageEngine.Managers.Cargo/CargoInstallTracker.cs:271-276 | src/UniGetUI.PackageEngine.Managers.Cargo/CargoInstallTracker.cs:288-293 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Cargo/CargoInstallTracker.cs:271` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (6 lines × 2) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorMapper.cs:119 — src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorMapper.cs:119-124 | src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorMapper.cs:284-289 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Note first that the copies are not typed on the same thing: the declarations holding them bind `rules` to `List<PolicyEditorDraftRule>` in one and `IEnumerable<PolicyRule>` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
  • Duplicated block (6 lines × 2) src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:588 — src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:588-596 | src/UniGetUI.Tui/Infrastructure/TuiBundleService.cs:264-269 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:588` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
  • Duplicated block (6 lines × 2) src/Shared/AutoUpdater.Helpers.cs:432 — src/Shared/AutoUpdater.Helpers.cs:432-437 | src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:2277-2282 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Read the line range as the matched WINDOW rather than a finished unit: at `src/Shared/AutoUpdater.Helpers.cs:432` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (6 lines × 2) src/UniGetUI.AgentSkills.Cli/AddHelpers.cs:65 — src/UniGetUI.AgentSkills.Cli/AddHelpers.cs:65-70 | src/UniGetUI.AgentSkills.Cli/AddHelpers.cs:102-107 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.AgentSkills.Cli/AddHelpers.cs:65` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note first that the copies are not typed on the same thing: the declarations holding them bind `targets` to `List<string>` in one and `List<InstallTarget>` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
  • Duplicated block (6 lines × 2) src/UniGetUI.AgentSkills.Cli/AddRun.cs:598 — src/UniGetUI.AgentSkills.Cli/AddRun.cs:598-603 | src/UniGetUI.AgentSkills.Cli/AddWellKnown.cs:136-141 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
  • Duplicated block (6 lines × 2) REDACTED:212 — REDACTED:212-217 | REDACTED:275-288 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `REDACTED:210` calls `StartsWith`, `Substring` and `REDACTED:275` does not — after which the two agree again for 3 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
  • Duplicated block (6 lines × 2) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:1028 — src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:1028-1033 | src/UniGetUI.Avalonia/Views/Pages/SettingsPages/PolicyEditor/PolicyEditorDialog.axaml.cs:357-362 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
  • Duplicated block (6 lines × 2) src/UniGetUI.AgentSkills.Cli/Update.cs:354 — src/UniGetUI.AgentSkills.Cli/Update.cs:354-359 | src/UniGetUI.AgentSkills/Api/UpdateEngine.cs:119-124 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/UniGetUI.AgentSkills/Api/UpdateEngine.cs:126` calls `ThrowIfCancelled` and `src/UniGetUI.AgentSkills.Cli/Update.cs:361` does not — after which the two agree again for 3 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
X3 · Exception handling · Swallowed exception (caught, then discarded) · ×12
  • Swallowed exception (caught, then discarded) src/UniGetUI.Avalonia/CrashHandler.cs:88 — `catch` does nothing with the exception it caught — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch. Log it through whatever this codebase already uses to report problems, or let it propagate; if one specific failure genuinely cannot matter, catch exactly that exception type and say why in a comment on the catch.
  • Swallowed exception (caught, then discarded) src/UniGetUI.Avalonia/ViewModels/Pages/GitRepositoriesViewModel.cs:545 — `catch (GitException)` does nothing with the exception it caught — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch. Log it through whatever this codebase already uses to report problems, or let it propagate; if one specific failure genuinely cannot matter, catch exactly that exception type and say why in a comment on the catch.
  • Swallowed exception (caught, then discarded) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:1302 — `catch (JsonException)` does nothing with the exception it caught — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch. Log it through whatever this codebase already uses to report problems, or let it propagate; if one specific failure genuinely cannot matter, catch exactly that exception type and say why in a comment on the catch.
  • Swallowed exception (caught, then discarded) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyValidationFinding.cs:286 — `catch (InvalidOperationException)` does nothing with the exception it caught — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch. Log it through whatever this codebase already uses to report problems, or let it propagate; if one specific failure genuinely cannot matter, catch exactly that exception type and say why in a comment on the catch.
  • Swallowed exception (caught, then discarded) src/UniGetUI.Avalonia/Views/Controls/Settings/ComboboxCard.cs:70 — `catch` does nothing with the exception it caught — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch. Log it through whatever this codebase already uses to report problems, or let it propagate; if one specific failure genuinely cannot matter, catch exactly that exception type and say why in a comment on the catch.
  • Swallowed exception (caught, then discarded) src/UniGetUI.Avalonia/Infrastructure/GHAuthApiRunner.cs:39 — `catch (Exception)` does nothing with the exception it caught — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch. Log it through whatever this codebase already uses to report problems, or let it propagate; if one specific failure genuinely cannot matter, catch exactly that exception type and say why in a comment on the catch.
  • Swallowed exception (caught, then discarded) src/UniGetUI.AgentSkills.Cli/GhInstalled.cs:170 — `catch` does nothing with the exception it caught — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch. Log it through whatever this codebase already uses to report problems, or let it propagate; if one specific failure genuinely cannot matter, catch exactly that exception type and say why in a comment on the catch.
  • Swallowed exception (caught, then discarded) src/UniGetUI.AgentSkills.Cli/GhInstalled.cs:224 — `catch (GitHubReleaseException)` does nothing with the exception it caught — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch. Log it through whatever this codebase already uses to report problems, or let it propagate; if one specific failure genuinely cannot matter, catch exactly that exception type and say why in a comment on the catch.
  • Swallowed exception (caught, then discarded) src/UniGetUI.AgentSkills.Cli/Preview.cs:148 — `catch` does nothing with the exception it caught — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch. Log it through whatever this codebase already uses to report problems, or let it propagate; if one specific failure genuinely cannot matter, catch exactly that exception type and say why in a comment on the catch.
  • Swallowed exception (caught, then discarded) src/UniGetUI.AgentSkills.Cli/Preview.cs:168 — `catch` does nothing with the exception it caught — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch. Log it through whatever this codebase already uses to report problems, or let it propagate; if one specific failure genuinely cannot matter, catch exactly that exception type and say why in a comment on the catch.
  • Swallowed exception (caught, then discarded) src/UniGetUI.AgentSkills.Cli/Preview.cs:424 — `catch (Exception) when (…)` does nothing with the exception it caught — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch. Log it through whatever this codebase already uses to report problems, or let it propagate; if one specific failure genuinely cannot matter, catch exactly that exception type and say why in a comment on the catch.
  • Swallowed exception (caught, then discarded) src/UniGetUI.AgentSkills.Cli/Sync.cs:257 — `catch (InvalidOperationException)` does nothing with the exception it caught — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch. Log it through whatever this codebase already uses to report problems, or let it propagate; if one specific failure genuinely cannot matter, catch exactly that exception type and say why in a comment on the catch.
D4 · Code Duplication · Edited copy of a member (9 corresponding lines) · ×11
  • Edited copy of a member (9 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/MacPkg.cs:152 — src/UniGetUI.PackageEngine.Managers.MacPkg/MacPkg.cs:152-160 | src/UniGetUI.PackageEngine.Managers.WinInstaller/WinInstaller.cs:138-146 — These two members are one piece of code written twice and then edited apart: 9 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (9 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgFeed.cs:100 — src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgFeed.cs:100-109 | src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/WinFeed.cs:68-76 — These two members are one piece of code written twice and then edited apart: 9 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (9 corresponding lines) src/UniGetUI.Avalonia/Infrastructure/GitHubCloudBackupService.cs:78 — src/UniGetUI.Avalonia/Infrastructure/GitHubCloudBackupService.cs:78-96 | src/UniGetUI.Tui/Infrastructure/TuiCloudBackup.cs:218-226 — These two members are one piece of code written twice and then edited apart: 9 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (9 corresponding lines) src/UniGetUI.AgentSkills.Cli/Notion.cs:221 — src/UniGetUI.AgentSkills.Cli/Notion.cs:221-230 | src/UniGetUI.AgentSkills/NotionFeed.cs:292-300 — These two members are one piece of code written twice and then edited apart: 9 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (9 corresponding lines) src/UniGetUI.Interface.IpcApi/IpcPackageApi.cs:157 — src/UniGetUI.Interface.IpcApi/IpcPackageApi.cs:157-165 | src/UniGetUI.Interface.IpcApi/IpcPackageApi.cs:168-176 — These two members are one piece of code written twice and then edited apart: 9 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (9 corresponding lines) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorAdvisories.cs:57 — src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorAdvisories.cs:57-65 | src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorAdvisories.cs:71-79 — These two members are one piece of code written twice and then edited apart: 9 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (9 corresponding lines) src/UniGetUI.Avalonia/Infrastructure/WindowsAppNotificationBridge.cs:130 — src/UniGetUI.Avalonia/Infrastructure/WindowsAppNotificationBridge.cs:130-138 | src/UniGetUI.Avalonia/Infrastructure/MacOsNotificationBridge.cs:93-101 — These two members are one piece of code written twice and then edited apart: 9 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (9 corresponding lines) src/UniGetUI.PackageEngine.Operations/Reboot/PendingRebootStore.cs:95 — src/UniGetUI.PackageEngine.Operations/Reboot/PendingRebootStore.cs:95-105 | src/UniGetUI.PackageEngine.Operations/History/OperationHistoryStore.cs:121-129 — These two members are one piece of code written twice and then edited apart: 9 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (9 corresponding lines) src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:43 — src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/NullPackageManager.cs:43-51 | src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/PackageManager.cs:231-239 — These two members are one piece of code written twice and then edited apart: 9 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (9 corresponding lines) src/UniGetUI.Avalonia/Views/Pages/SettingsPages/ExtensionsHomepage.axaml.cs:84 — src/UniGetUI.Avalonia/Views/Pages/SettingsPages/ExtensionsHomepage.axaml.cs:84-92 | src/UniGetUI.Avalonia/Views/Pages/SettingsPages/ManagersHomepage.axaml.cs:108-116 — These two members are one piece of code written twice and then edited apart: 9 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (9 corresponding lines) src/UniGetUI.Avalonia/Views/DialogPages/ManageAutoUpdatesWindow.axaml.cs:10 — src/UniGetUI.Avalonia/Views/DialogPages/ManageAutoUpdatesWindow.axaml.cs:10-18 | src/UniGetUI.Avalonia/Views/DialogPages/ManageIgnoredUpdatesWindow.axaml.cs:12-20 — These two members are one piece of code written twice and then edited apart: 9 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D5 · Coupling · Off the main sequence · ×11
  • Off the main sequence: UniGetUI.Core.Logging(net10.0) src/UniGetUI.Core.Logger/UniGetUI.Core.Logging.csproj:1 — UniGetUI.Core.Logging(net10.0): abstractness 0.00, instability 0.00, distance 1.00 — zone of pain — concrete and depended on by 31 project(s), so it's rigid to change.
  • Off the main sequence: UniGetUI.Interface.Enums(net10.0) src/UniGetUI.Interface.Enums/UniGetUI.Interface.Enums.csproj:1 — UniGetUI.Interface.Enums(net10.0): abstractness 0.00, instability 0.00, distance 1.00 — zone of pain — concrete and depended on by 17 project(s), so it's rigid to change.
  • Off the main sequence: UniGetUI.PackageEngine.Structs(net10.0) src/UniGetUI.PackageEngine.Enums/UniGetUI.PackageEngine.Structs.csproj:1 — UniGetUI.PackageEngine.Structs(net10.0): abstractness 0.00, instability 0.00, distance 1.00 — zone of pain — concrete and depended on by 24 project(s), so it's rigid to change.
  • Off the main sequence: UniGetUI.AgentSkills(net10.0) src/UniGetUI.AgentSkills/UniGetUI.AgentSkills.csproj:1 — UniGetUI.AgentSkills(net10.0): abstractness 0.01, instability 0.00, distance 0.99 — zone of pain — concrete and depended on by 2 project(s), so it's rigid to change.
  • Off the main sequence: UniGetUI.Core.Data(net10.0) src/UniGetUI.Core.Data/UniGetUI.Core.Data.csproj:1 — UniGetUI.Core.Data(net10.0): abstractness 0.00, instability 0.03, distance 0.97 — zone of pain — concrete and depended on by 29 project(s), so it's rigid to change.
  • Off the main sequence: UniGetUI.Core.Settings(net10.0) src/UniGetUI.Core.Settings/UniGetUI.Core.Settings.csproj:1 — UniGetUI.Core.Settings(net10.0): abstractness 0.00, instability 0.07, distance 0.93 — zone of pain — concrete and depended on by 27 project(s), so it's rigid to change.
  • Off the main sequence: UniGetUI.Core.Tools(net10.0) src/UniGetUI.Core.Tools/UniGetUI.Core.Tools.csproj:1 — UniGetUI.Core.Tools(net10.0): abstractness 0.00, instability 0.15, distance 0.85 — zone of pain — concrete and depended on by 27 project(s), so it's rigid to change.
  • Off the main sequence: UniGetUI.Core.LanguageEngine(net10.0) src/UniGetUI.Core.LanguageEngine/UniGetUI.Core.LanguageEngine.csproj:1 — UniGetUI.Core.LanguageEngine(net10.0): abstractness 0.00, instability 0.19, distance 0.81 — zone of pain — concrete and depended on by 21 project(s), so it's rigid to change.
  • Off the main sequence: UniGetUI.Core.IconEngine(net10.0) src/UniGetUI.Core.IconStore/UniGetUI.Core.IconEngine.csproj:1 — UniGetUI.Core.IconEngine(net10.0): abstractness 0.00, instability 0.19, distance 0.81 — zone of pain — concrete and depended on by 17 project(s), so it's rigid to change.
  • Off the main sequence: UniGetUI.Core.Classes(net10.0) src/UniGetUI.Core.Classes/UniGetUI.Core.Classes.csproj:1 — UniGetUI.Core.Classes(net10.0): abstractness 0.17, instability 0.04, distance 0.79 — zone of pain — concrete and depended on by 23 project(s), so it's rigid to change.
  • Off the main sequence: UniGetUI.Core.SecureSettings(net10.0) src/UniGetUI.Core.SecureSettings/UniGetUI.Core.SecureSettings.csproj:1 — UniGetUI.Core.SecureSettings(net10.0): abstractness 0.00, instability 0.29, distance 0.71 — zone of pain — concrete and depended on by 4 project(s), so it's rigid to change.
AX2 · Stateful singletons · Stateful shared instance · ×10
  • Stateful shared instance: OperationViewModel src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationViewModel.cs:37 — `OperationViewModel` is not registered, but `AvaloniaOperationRegistry` creates it and keeps it in the static `OperationViewModels`, so that one instance serves the whole process and is shared by every thread that reaches it — and it mutates instance state outside any lock (LiveLine, ProgressIndeterminate, ProgressValue, _visualStatus, ButtonText, _menuState; e.g. `LiveLine` at line 99).
  • Stateful shared instance: IpcServer REDACTED:28 — `IpcServer` is not registered, but `AvaloniaBootstrapper` creates it and keeps it in the static `_ipcApi`, so that one instance serves the whole process and is shared by every thread that reaches it — and it mutates instance state outside any lock (_transportOptions, _namedPipePath, _host; e.g. `_transportOptions` at line 70).
  • Stateful shared instance: IconDatabase src/UniGetUI.Core.IconStore/IconDatabase.cs:12 — `IconDatabase` keeps one instance of itself in the static `__instance`, so that one instance serves the whole process and is shared by every thread that reaches it — and it mutates instance state outside any lock (IconDatabaseData, __icon_count; e.g. `IconDatabaseData` at line 134).
  • Stateful shared instance: LanguageEngine src/UniGetUI.Core.LanguageEngine/LanguageEngine.cs:12 — `LanguageEngine` is not registered, but `CoreTools` creates it and keeps it in the static `LanguageEngine`, so that one instance serves the whole process and is shared by every thread that reaches it — and it mutates instance state outside any lock (Locale, MainLangDict, Formatter; e.g. `Locale` at line 53).
  • Stateful shared instance: InstallOptions src/UniGetUI.PackageEngine.Serializable/InstallOptions.cs:8 — `InstallOptions` is not registered, but `InstallOptionsFactory` creates it and keeps it in the static `_optionsCache`, so that one instance serves the whole process and is shared by every thread that reaches it — and it mutates instance state outside any lock (OverridesNextLevelOpts; e.g. `OverridesNextLevelOpts` at line 300).
  • Stateful shared instance: DownloadOperation src/UniGetUI.PackageEngine.Operations/DownloadOperation.cs:12 — `DownloadOperation` is not registered, but `TuiPackageActions` creates it and keeps it in the static `TuiOperationRegistry._ops`, so that one instance serves the whole process and is shared by every thread that reaches it — and it mutates instance state outside any lock (SkipHashCheck, HashMismatched, downloadLocation, _rejectedFile, _rejectedHash, _rejectedUrl; e.g. `SkipHashCheck` at line 78).
  • Stateful shared instance: ManagerSettingsDialog src/UniGetUI.Tui/Views/Pages/ManagersPage.cs:90 — `ManagerSettingsDialog` keeps one instance of itself in the static `TuiModal._stack`, so that one instance serves the whole process and is shared by every thread that reaches it — and it mutates instance state outside any lock (_sources; e.g. `_sources` at line 114).
  • Stateful shared instance: OperationCardController src/UniGetUI.PackageEngine.Operations/OperationCardController.cs:15 — `OperationCardController` is not registered, but the singleton `OperationViewModel` creates it and keeps it in `_controller`, so one instance outlives every request and is shared by every caller that reaches it — and it mutates instance state outside any lock (_card, _lastLogLine, _determinateProgressActive; e.g. `_card` at line 42).
  • Stateful shared instance: AttemptScope src/Shared/AutoUpdater.Helpers.cs:442 — `AttemptScope` is not registered, but the singleton `UpdaterAttemptCoordinator` creates it and keeps it in `_activeScope`, so one instance outlives every request and is shared by every caller that reaches it — and it mutates instance state outside any lock (_isManualCheck, _isSuperseded, _awaitingConsentVersion; e.g. `_isManualCheck` at line 527).
  • Stateful shared instance: TuiForm src/UniGetUI.Tui/Views/Controls/TuiForm.cs:24 — `TuiForm` is not registered, but the singleton `AboutDialog` creates it and keeps it in `_form`, so one instance outlives every request and is shared by every caller that reaches it — and it mutates instance state outside any lock (_refreshers; e.g. `_refreshers` at line 42).
D4 · Code Duplication · Edited copy of a member (15 corresponding lines) · ×10
  • Edited copy of a member (15 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/Helpers/MacPkgOperationHelper.cs:61 — src/UniGetUI.PackageEngine.Managers.MacPkg/Helpers/MacPkgOperationHelper.cs:61-75 | src/UniGetUI.PackageEngine.Managers.WinInstaller/Helpers/WinInstallerOperationHelper.cs:46-64 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (15 corresponding lines) src/UniGetUI.Avalonia/Views/Controls/SmoothScrollManager.cs:444 — src/UniGetUI.Avalonia/Views/Controls/SmoothScrollManager.cs:444-458 | src/UniGetUI.Avalonia/Views/Controls/SmoothScrollManager.cs:461-479 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (15 corresponding lines) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyValidationFinding.cs:271 — src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyValidationFinding.cs:271-295 | src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyValidationFinding.cs:299-313 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (15 corresponding lines) src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:656 — src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:656-671 | src/UniGetUI.Tui/Infrastructure/TuiPackageActions.cs:155-169 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (15 corresponding lines) src/UniGetUI.PackageEngine.Managers.Npm/Helpers/NpmPackageIdentifier.cs:16 — src/UniGetUI.PackageEngine.Managers.Npm/Helpers/NpmPackageIdentifier.cs:16-30 | src/UniGetUI.PackageEngine.Managers.Npm/Helpers/NpmPkgOperationHelper.cs:69-83 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (15 corresponding lines) src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs:329 — src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs:329-343 | src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs:1220-1236 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (15 corresponding lines) src/UniGetUI.Avalonia/Infrastructure/WindowsAppNotificationBridge.cs:228 — src/UniGetUI.Avalonia/Infrastructure/WindowsAppNotificationBridge.cs:228-245 | src/UniGetUI.Avalonia/Infrastructure/MacOsNotificationBridge.cs:157-171 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (15 corresponding lines) REDACTED:1859 — REDACTED:1859-1879 | REDACTED:1941-1955 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (15 corresponding lines) src/UniGetUI.Core.IconStore/IconCacheEngine.cs:392 — src/UniGetUI.Core.IconStore/IconCacheEngine.cs:392-406 | src/UniGetUI.Core.IconStore/IconCacheEngine.cs:412-426 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (15 corresponding lines) src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:786 — src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:786-800 | src/UniGetUI.Core.Tools/UpdaterDownloadEngine.cs:624-638 — These two members are one piece of code written twice and then edited apart: 15 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (7 corresponding lines) · ×10
  • Edited copy of a member (7 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgFeed.cs:175 — src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgFeed.cs:175-181 | src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/WinFeed.cs:124-130 — These two members are one piece of code written twice and then edited apart: 7 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (7 corresponding lines) src/UniGetUI.Tui/Views/Pages/OperationsPage.cs:372 — src/UniGetUI.Tui/Views/Pages/OperationsPage.cs:372-378 | src/UniGetUI.Tui/Views/Pages/OperationsPage.cs:381-387 — These two members are one piece of code written twice and then edited apart: 7 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (7 corresponding lines) src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/BundleImportFilter.cs:201 — src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/BundleImportFilter.cs:201-220 | src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/BundleImportFilter.cs:310-316 — These two members are one piece of code written twice and then edited apart: 7 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (7 corresponding lines) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:1027 — src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:1027-1033 | src/UniGetUI.Avalonia/Views/Pages/SettingsPages/PolicyEditor/PolicyEditorDialog.axaml.cs:356-362 — These two members are one piece of code written twice and then edited apart: 7 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (7 corresponding lines) src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/AutoUpdatesDatabase.cs:12 — src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/AutoUpdatesDatabase.cs:12-18 | src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/IgnoredUpdatesDatabase.cs:93-99 — These two members are one piece of code written twice and then edited apart: 7 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (7 corresponding lines) src/UniGetUI.Core.Data/PortableDataImport.cs:109 — src/UniGetUI.Core.Data/PortableDataImport.cs:109-115 | src/UniGetUI.Core.SecureSettings/SecureSettings.cs:244-251 — These two members are one piece of code written twice and then edited apart: 7 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (7 corresponding lines) src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs:960 — src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs:960-967 | src/UniGetUI.Avalonia/ViewModels/SoftwarePages/SoftwareCatalogViewModel.cs:81-87 — These two members are one piece of code written twice and then edited apart: 7 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (7 corresponding lines) src/UniGetUI.PackageEngine.AgentBroker/BrokerRequestBuilder.cs:298 — src/UniGetUI.PackageEngine.AgentBroker/BrokerRequestBuilder.cs:298-304 | src/UniGetUI.PackageEngine.AgentBroker/BrokerRequestValidator.cs:706-712 — These two members are one piece of code written twice and then edited apart: 7 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (7 corresponding lines) src/UniGetUI.Tui/Views/Dialogs/StandardDialogs.cs:80 — src/UniGetUI.Tui/Views/Dialogs/StandardDialogs.cs:80-86 | REDACTED:717-723 — These two members are one piece of code written twice and then edited apart: 7 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (7 corresponding lines) src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:337 — src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:337-348 | src/UniGetUI.Tui/Infrastructure/TuiMaintenance.cs:242-248 — These two members are one piece of code written twice and then edited apart: 7 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D3 · God Classes · ClassTooLong · ×9
  • ClassTooLong: IpcCliCommandRunner src/UniGetUI.Interface.IpcApi/IpcCliCommandRunner.cs — ClassTooLong — 638 significant lines (blank, comment-only and punctuation-only lines excluded), 25 methods. The bar is 400 significant lines; this is 238 over it, 1.60× the bar. The type holds no instance state, so there is no shared data to group its members by. To reduce it, split it by area instead: give each cohesive family of members its own smaller type, so no one type has to be read whole to change one of them.
  • ClassTooLong: BaseNuGet src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs — ClassTooLong — 608 significant lines (blank, comment-only and punctuation-only lines excluded), 26 methods. The bar is 400 significant lines; this is 208 over it, 1.52× the bar. The type holds no instance state, so there is no shared data to group its members by. To reduce it, split it by area instead: give each cohesive family of members its own smaller type, so no one type has to be read whole to change one of them.
  • ClassTooLong: PackageManagerPage src/UniGetUI.Avalonia/Views/Pages/SettingsPages/PackageManagerPage.axaml.cs — ClassTooLong — 539 significant lines (blank, comment-only and punctuation-only lines excluded), 12 methods. The bar is 400 significant lines; this is 139 over it, 1.35× the bar. The type holds no instance state, so there is no shared data to group its members by. To reduce it, split it by area instead: give each cohesive family of members its own smaller type, so no one type has to be read whole to change one of them.
  • ClassTooLong: Scoop src/UniGetUI.PackageEngine.Managers.Scoop/Scoop.cs — ClassTooLong — 515 significant lines (blank, comment-only and punctuation-only lines excluded), 26 methods. The bar is 400 significant lines; this is 115 over it, 1.29× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • ClassTooLong: UpdateCommand src/UniGetUI.AgentSkills.Cli/Update.cs — ClassTooLong — 463 significant lines (blank, comment-only and punctuation-only lines excluded), 28 methods. The bar is 400 significant lines; this is 63 over it, 1.16× the bar. The type holds no instance state, so there is no shared data to group its members by. To reduce it, split it by area instead: give each cohesive family of members its own smaller type, so no one type has to be read whole to change one of them.
  • ClassTooLong: TuiThemes src/UniGetUI.Tui/Theme/TuiTheme.cs — ClassTooLong — 431 significant lines (blank, comment-only and punctuation-only lines excluded), 2 methods. The bar is 400 significant lines; this is 31 over it, 1.08× the bar. The type holds no instance state, so there is no shared data to group its members by. To reduce it, split it by area instead: give each cohesive family of members its own smaller type, so no one type has to be read whole to change one of them.
  • ClassTooLong: PolicyEditorRuleUi src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorStructuredUi.cs — ClassTooLong — 430 significant lines (blank, comment-only and punctuation-only lines excluded), 17 methods. The bar is 400 significant lines; this is 30 over it, 1.08× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • ClassTooLong: DownloadOperation src/UniGetUI.PackageEngine.Operations/DownloadOperation.cs — ClassTooLong — 426 significant lines (blank, comment-only and punctuation-only lines excluded), 19 methods. The bar is 400 significant lines; this is 26 over it, 1.07× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • ClassTooLong: PolicyFindingPresentation src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyValidationFinding.cs — ClassTooLong — 404 significant lines (blank, comment-only and punctuation-only lines excluded), 21 methods. The bar is 400 significant lines; this is 4 over it, 1.01× the bar. The type holds no instance state, so there is no shared data to group its members by. To reduce it, split it by area instead: give each cohesive family of members its own smaller type, so no one type has to be read whole to change one of them.
D4 · Code Duplication · Edited copy of a member (6 corresponding lines) · ×9
  • Edited copy of a member (6 corresponding lines) src/UniGetUI.Tui/Views/Pages/HistoryPage.cs:181 — src/UniGetUI.Tui/Views/Pages/HistoryPage.cs:181-186 | src/UniGetUI.Tui/Views/Pages/OperationsPage.cs:364-369 — These two members are one piece of code written twice and then edited apart: 6 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (6 corresponding lines) src/UniGetUI.AgentSkills.Cli/List.cs:19 — src/UniGetUI.AgentSkills.Cli/List.cs:19-24 | src/UniGetUI.AgentSkills.Cli/Sync.cs:17-22 — These two members are one piece of code written twice and then edited apart: 6 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (6 corresponding lines) src/UniGetUI.Extensions.AgentSkills/AgentHostLocator.cs:260 — src/UniGetUI.Extensions.AgentSkills/AgentHostLocator.cs:260-265 | src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/SystemWinGetLocator.cs:120-125 — These two members are one piece of code written twice and then edited apart: 6 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (6 corresponding lines) src/UniGetUI.AgentSkills.Cli/Preview.cs:233 — src/UniGetUI.AgentSkills.Cli/Preview.cs:233-238 | src/UniGetUI.AgentSkills.Cli/Validate.cs:205-210 — These two members are one piece of code written twice and then edited apart: 6 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (6 corresponding lines) src/UniGetUI.Avalonia/Views/Controls/Settings/CheckboxCard.cs:81 — src/UniGetUI.Avalonia/Views/Controls/Settings/CheckboxCard.cs:81-86 | src/UniGetUI.Avalonia/Views/Controls/Settings/SecureCheckboxCard.cs:70-75 — These two members are one piece of code written twice and then edited apart: 6 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (6 corresponding lines) src/UniGetUI.Avalonia/Views/SoftwarePages/DiscoverSoftwarePage.cs:356 — src/UniGetUI.Avalonia/Views/SoftwarePages/DiscoverSoftwarePage.cs:356-361 | src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:358-363 — These two members are one piece of code written twice and then edited apart: 6 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (6 corresponding lines) src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:350 — src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:350-355 | src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:390-395 — These two members are one piece of code written twice and then edited apart: 6 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (6 corresponding lines) src/UniGetUI.Tui/Views/Dialogs/InstallOptionsDialog.cs:101 — src/UniGetUI.Tui/Views/Dialogs/InstallOptionsDialog.cs:101-106 | src/UniGetUI.Tui/Views/Dialogs/PackageDetailsDialog.cs:70-75 — These two members are one piece of code written twice and then edited apart: 6 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (6 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/MacPkg.cs:76 — src/UniGetUI.PackageEngine.Managers.MacPkg/MacPkg.cs:76-81 | src/UniGetUI.PackageEngine.Managers.WinInstaller/WinInstaller.cs:74-79 — These two members are one piece of code written twice and then edited apart: 6 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Duplicated block (11 lines × 2) · ×8
  • Duplicated block (11 lines × 2) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Json.cs:33 — src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Json.cs:33-43 | src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Json.cs:111-121 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
  • Duplicated block (11 lines × 2) src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetCliHelper.cs:241 — src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetCliHelper.cs:241-251 | src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetCliHelper.cs:409-419 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
  • Duplicated block (11 lines × 2) src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:106 — src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:106-116 | src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:107-117 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:106` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (11 lines × 2) src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:234 — src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:234-244 | src/UniGetUI.Tui/Infrastructure/TuiMaintenance.cs:103-113 — before extracting anything, compare `src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs` and `src/UniGetUI.Tui/Infrastructure/TuiMaintenance.cs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 49 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
  • Duplicated block (11 lines × 2) src/UniGetUI.AgentSkills.Cli/AddRun.cs:420 — src/UniGetUI.AgentSkills.Cli/AddRun.cs:420-430 | src/UniGetUI.AgentSkills.Cli/Sync.cs:191-201 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.AgentSkills.Cli/AddRun.cs:420` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (11 lines × 2) src/UniGetUI.PackageEngine.Managers.Homebrew/Homebrew.cs:189 — src/UniGetUI.PackageEngine.Managers.Homebrew/Homebrew.cs:189-199 | src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs:130-153 — `src/UniGetUI.PackageEngine.Managers.Homebrew/Homebrew.cs` and `src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs` are one unit implemented once per sibling directory, so they are most likely parallel implementations of one contract rather than a copy of each other — this scan matched 4 separate duplicated blocks between them, totalling at least 79 lines. If both are selected at run time, neither can be retired in favour of the other, and the lines that DIFFER between them are the reason both exist. The move that pays here is to hoist the identical part into a shared location the whole family can reach and give what differs a parameter or a seam, so a change lands once instead of once per sibling; extracting one helper per block leaves every sibling to drift on its own. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Homebrew/Homebrew.cs:189` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/UniGetUI.PackageEngine.Managers.Homebrew/Homebrew.cs:187` calls `GetSourceOrDefault` and `src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs:130` does not — after which the two agree again for 3 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
  • Duplicated block (11 lines × 2) src/UniGetUI.PackageEngine.Managers.Apt/Helpers/AptPkgDetailsHelper.cs:107 — src/UniGetUI.PackageEngine.Managers.Apt/Helpers/AptPkgDetailsHelper.cs:107-117 | src/UniGetUI.PackageEngine.Managers.Snap/Helpers/SnapPkgDetailsHelper.cs:106-116 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Apt/Helpers/AptPkgDetailsHelper.cs:107` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (11 lines × 2) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGetDetailsHelper.cs:282 — src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGetDetailsHelper.cs:282-292 | src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGetDetailsHelper.cs:352-362 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
X1 · Async correctness · Sync-over-async (deadlock risk) · ×8
  • Sync-over-async (deadlock risk) src/UniGetUI.Avalonia/Views/DialogPages/CrashReportWindow.axaml.cs:56 — Blocking on a Task with `.Wait()`/`.GetAwaiter().GetResult()` can deadlock (and wastes a thread). Prefer awaiting it: make the caller `async` and `await` instead. Where a synchronous entry point must stay — a public sync API you cannot break, or a process entry point that must not return until the work finishes — the block belongs in ONE documented bridge and never inside code that is already async; and where it already is that bridge, give the wait a TIMEOUT so a hung task fails the call instead of hanging the process.
  • Sync-over-async (deadlock risk) src/Shared/SharedPreUiCommandDispatcher.cs:265 — Blocking on a Task with `.Wait()`/`.GetAwaiter().GetResult()` can deadlock (and wastes a thread). Prefer awaiting it: make the caller `async` and `await` instead. Where a synchronous entry point must stay — a public sync API you cannot break, or a process entry point that must not return until the work finishes — the block belongs in ONE documented bridge and never inside code that is already async; and where it already is that bridge, give the wait a TIMEOUT so a hung task fails the call instead of hanging the process.
  • Sync-over-async (deadlock risk) src/Shared/SharedPreUiCommandDispatcher.cs:283 — Blocking on a Task with `.Wait()`/`.GetAwaiter().GetResult()` can deadlock (and wastes a thread). Prefer awaiting it: make the caller `async` and `await` instead. Where a synchronous entry point must stay — a public sync API you cannot break, or a process entry point that must not return until the work finishes — the block belongs in ONE documented bridge and never inside code that is already async; and where it already is that bridge, give the wait a TIMEOUT so a hung task fails the call instead of hanging the process.
  • Sync-over-async (deadlock risk) src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:1954 — Blocking on a Task with `.Wait()`/`.GetAwaiter().GetResult()` can deadlock (and wastes a thread). Prefer awaiting it: make the caller `async` and `await` instead. Where a synchronous entry point must stay — a public sync API you cannot break, or a process entry point that must not return until the work finishes — the block belongs in ONE documented bridge and never inside code that is already async; and where it already is that bridge, give the wait a TIMEOUT so a hung task fails the call instead of hanging the process.
  • Sync-over-async (deadlock risk) src/UniGetUI.Avalonia/Infrastructure/AvaloniaBootstrapper.cs:221 — Blocking on a Task with `.Wait()`/`.GetAwaiter().GetResult()` can deadlock (and wastes a thread). Prefer awaiting it: make the caller `async` and `await` instead. Where a synchronous entry point must stay — a public sync API you cannot break, or a process entry point that must not return until the work finishes — the block belongs in ONE documented bridge and never inside code that is already async; and where it already is that bridge, give the wait a TIMEOUT so a hung task fails the call instead of hanging the process.
  • Sync-over-async (deadlock risk) src/UniGetUI.Avalonia/Infrastructure/AvaloniaBootstrapper.cs:223 — Blocking on a Task with `.Wait()`/`.GetAwaiter().GetResult()` can deadlock (and wastes a thread). Prefer awaiting it: make the caller `async` and `await` instead. Where a synchronous entry point must stay — a public sync API you cannot break, or a process entry point that must not return until the work finishes — the block belongs in ONE documented bridge and never inside code that is already async; and where it already is that bridge, give the wait a TIMEOUT so a hung task fails the call instead of hanging the process.
  • Sync-over-async (deadlock risk) src/UniGetUI.Avalonia/Infrastructure/AvaloniaBootstrapper.cs:225 — Blocking on a Task with `.Wait()`/`.GetAwaiter().GetResult()` can deadlock (and wastes a thread). Prefer awaiting it: make the caller `async` and `await` instead. Where a synchronous entry point must stay — a public sync API you cannot break, or a process entry point that must not return until the work finishes — the block belongs in ONE documented bridge and never inside code that is already async; and where it already is that bridge, give the wait a TIMEOUT so a hung task fails the call instead of hanging the process.
  • Sync-over-async (deadlock risk) src/UniGetUI.Avalonia/Infrastructure/AvaloniaBootstrapper.cs:227 — Blocking on a Task with `.Wait()`/`.GetAwaiter().GetResult()` can deadlock (and wastes a thread). Prefer awaiting it: make the caller `async` and `await` instead. Where a synchronous entry point must stay — a public sync API you cannot break, or a process entry point that must not return until the work finishes — the block belongs in ONE documented bridge and never inside code that is already async; and where it already is that bridge, give the wait a TIMEOUT so a hung task fails the call instead of hanging the process.
D4 · Code Duplication · Edited copy of a member (16 corresponding lines) · ×7
  • Edited copy of a member (16 corresponding lines) src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:445 — src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:445-460 | src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:467-483 — These two members are one piece of code written twice and then edited apart: 16 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (16 corresponding lines) src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:400 — src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:400-415 | src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:449-464 — These two members are one piece of code written twice and then edited apart: 16 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (16 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/MacPkg.cs:97 — src/UniGetUI.PackageEngine.Managers.MacPkg/MacPkg.cs:97-112 | src/UniGetUI.PackageEngine.Managers.WinInstaller/WinInstaller.cs:93-108 — These two members are one piece of code written twice and then edited apart: 16 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (16 corresponding lines) src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:1309 — src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:1309-1324 | src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:1327-1342 — These two members are one piece of code written twice and then edited apart: 16 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (16 corresponding lines) src/UniGetUI.Core.Tools/InstallerHostDisplay.cs:8 — src/UniGetUI.Core.Tools/InstallerHostDisplay.cs:8-23 | src/UniGetUI.Core.Tools/InstallerHostDisplay.cs:26-43 — These two members are one piece of code written twice and then edited apart: 16 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (16 corresponding lines) src/Shared/SharedPreUiCommandDispatcher.cs:257 — src/Shared/SharedPreUiCommandDispatcher.cs:257-272 | src/Shared/SharedPreUiCommandDispatcher.cs:275-290 — These two members are one piece of code written twice and then edited apart: 16 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (16 corresponding lines) src/UniGetUI.AgentSkills.Cli/Term.cs:51 — src/UniGetUI.AgentSkills.Cli/Term.cs:51-68 | src/UniGetUI.AgentSkills.Cli/Term.cs:80-95 — These two members are one piece of code written twice and then edited apart: 16 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (10 corresponding lines) · ×7
  • Edited copy of a member (10 corresponding lines) src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs:1399 — src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs:1399-1412 | src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:433-442 — These two members are one piece of code written twice and then edited apart: 10 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (10 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/Helpers/MacPkgDetailsHelper.cs:37 — src/UniGetUI.PackageEngine.Managers.MacPkg/Helpers/MacPkgDetailsHelper.cs:37-46 | src/UniGetUI.PackageEngine.Managers.WinInstaller/Helpers/WinInstallerDetailsHelper.cs:32-41 — These two members are one piece of code written twice and then edited apart: 10 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (10 corresponding lines) src/UniGetUI.Avalonia/Views/Pages/SettingsPages/PolicyEditor/PolicyEditorDialog.axaml.cs:111 — src/UniGetUI.Avalonia/Views/Pages/SettingsPages/PolicyEditor/PolicyEditorDialog.axaml.cs:111-120 | src/UniGetUI.Avalonia/Views/Pages/SettingsPages/PolicyEditor/PolicyEditorDialog.axaml.cs:123-132 — These two members are one piece of code written twice and then edited apart: 10 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (10 corresponding lines) src/UniGetUI.PackageEngine.Managers.Chocolatey/Helpers/ChocolateyPkgOperationHelper.cs:28 — src/UniGetUI.PackageEngine.Managers.Chocolatey/Helpers/ChocolateyPkgOperationHelper.cs:28-37 | src/UniGetUI.PackageEngine.Managers.Chocolatey/Helpers/ChocolateyPkgOperationHelper.cs:40-49 — These two members are one piece of code written twice and then edited apart: 10 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (10 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgFeed.cs:161 — src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgFeed.cs:161-171 | src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/WinFeed.cs:112-121 — These two members are one piece of code written twice and then edited apart: 10 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (10 corresponding lines) src/UniGetUI.Avalonia/Views/Pages/SettingsPages/Experimental.axaml.cs:16 — src/UniGetUI.Avalonia/Views/Pages/SettingsPages/Experimental.axaml.cs:16-25 | src/UniGetUI.Avalonia/Views/Pages/SettingsPages/Internet.axaml.cs:23-32 — These two members are one piece of code written twice and then edited apart: 10 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (10 corresponding lines) src/UniGetUI.Interface.IpcApi/IpcOperationApi.cs:357 — src/UniGetUI.Interface.IpcApi/IpcOperationApi.cs:357-368 | src/UniGetUI.PackageEngine.Operations/History/OperationHistoryRecord.cs:308-317 — These two members are one piece of code written twice and then edited apart: 10 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (11 corresponding lines) · ×7
  • Edited copy of a member (11 corresponding lines) REDACTED:132 — REDACTED:132-142 | REDACTED:178-188 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (11 corresponding lines) src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/ManagerTable.cs:33 — src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/ManagerTable.cs:33-48 | src/UniGetUI.PackageEngine.Managers.Scoop/Helpers/ScoopTable.cs:39-49 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (11 corresponding lines) src/UniGetUI.Core.Tools/PythonVersionSpecifier.cs:114 — src/UniGetUI.Core.Tools/PythonVersionSpecifier.cs:114-124 | src/UniGetUI.PackageEngine.Managers.Npm/Npm.cs:328-341 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (11 corresponding lines) src/UniGetUI.PackageEngine.Operations/History/OperationHistoryStore.cs:108 — src/UniGetUI.PackageEngine.Operations/History/OperationHistoryStore.cs:108-118 | src/UniGetUI.PackageEngine.Operations/Reboot/PendingRebootStore.cs:67-92 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (11 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgFeed.cs:246 — src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgFeed.cs:246-256 | src/UniGetUI.PackageEngine.Managers.Generic.InstallerFeeds/FeedListing.cs:87-98 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (11 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgFeed.cs:122 — src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgFeed.cs:122-132 | src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/WinFeed.cs:79-89 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (11 corresponding lines) src/UniGetUI.Core.Data/UpdateInProgressGuard.cs:61 — src/UniGetUI.Core.Data/UpdateInProgressGuard.cs:61-74 | src/UniGetUI.Interface.IpcApi/IpcClient.cs:1699-1709 — These two members are one piece of code written twice and then edited apart: 11 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D17 · Explicit Debt · TodoComment · ×6
  • TodoComment src/UniGetUI.PackageEngine.Managers.Bun/Bun.cs:390 — // TODO: Replace table parsing with JSON deserialization when bun outdated adds --json flag.
  • TodoComment src/UniGetUI.PackageEngine.Managers.Cargo/Helpers/CargoPkgDetailsHelper.cs:67 — // TODO: most packages are hosted on Github; see if there's a way to use the repository — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment src/UniGetUI.PackageEngine.Managers.Vcpkg/Helpers/VcpkgPkgDetailsHelper.cs:57 — // TODO: since each change results in a new commit to the file, you could determine the `UpdateDate` via figuring out the date of the last commit that changed the file was.
  • TodoComment src/UniGetUI.PackageEngine.Managers.Vcpkg/Helpers/VcpkgPkgDetailsHelper.cs:62 — // TODO: the "features" and "dependencies" keys could also be good candidates for tags, however their type specifications are all over -
  • TodoComment REDACTED:100 — // TODO: Perhaps use --x-json when it is fixed — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment REDACTED:254 — // TODO: Once --x-json is stable migrate to --x-json — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
D4 · Code Duplication · Edited copy of a member (23 corresponding lines) · ×6
  • Edited copy of a member (23 corresponding lines) src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:171 — src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:171-213 | src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:216-264 — These two members are one piece of code written twice and then edited apart: 23 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (23 corresponding lines) src/Shared/AutoUpdater.Helpers.cs:12 — src/Shared/AutoUpdater.Helpers.cs:12-37 | src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:2040-2062 — These two members are one piece of code written twice and then edited apart: 23 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (23 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgFeed.cs:59 — src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgFeed.cs:59-81 | src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/WinFeed.cs:40-62 — These two members are one piece of code written twice and then edited apart: 23 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (23 corresponding lines) src/UniGetUI.Core.Settings/SettingsEngine_Dictionaries.cs:112 — src/UniGetUI.Core.Settings/SettingsEngine_Dictionaries.cs:112-138 | src/UniGetUI.Core.Settings/SettingsEngine_Lists.cs:84-106 — These two members are one piece of code written twice and then edited apart: 23 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (23 corresponding lines) src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:167 — src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:167-192 | src/UniGetUI.Tui/Infrastructure/TuiMaintenance.cs:156-178 — These two members are one piece of code written twice and then edited apart: 23 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (23 corresponding lines) src/UniGetUI.PackageEngine.Managers.Cargo/Cargo.cs:43 — src/UniGetUI.PackageEngine.Managers.Cargo/Cargo.cs:43-69 | src/UniGetUI.PackageEngine.Managers.Npm/Npm.cs:344-366 — These two members are one piece of code written twice and then edited apart: 23 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (13 corresponding lines) · ×6
  • Edited copy of a member (13 corresponding lines) src/Shared/AutoUpdater.Helpers.cs:393 — src/Shared/AutoUpdater.Helpers.cs:393-417 | src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:2230-2242 — These two members are one piece of code written twice and then edited apart: 13 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (13 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/Helpers/MacPkgDetailsHelper.cs:18 — src/UniGetUI.PackageEngine.Managers.MacPkg/Helpers/MacPkgDetailsHelper.cs:18-34 | src/UniGetUI.PackageEngine.Managers.WinInstaller/Helpers/WinInstallerDetailsHelper.cs:17-29 — These two members are one piece of code written twice and then edited apart: 13 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (13 corresponding lines) src/UniGetUI.Tui/Infrastructure/TuiPackageActions.cs:27 — src/UniGetUI.Tui/Infrastructure/TuiPackageActions.cs:27-40 | src/UniGetUI.Tui/Infrastructure/TuiPackageActions.cs:65-77 — These two members are one piece of code written twice and then edited apart: 13 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (13 corresponding lines) src/UniGetUI.Extensions.AgentSkills/ClaudePluginService.cs:157 — src/UniGetUI.Extensions.AgentSkills/ClaudePluginService.cs:157-170 | src/UniGetUI.Extensions.AgentSkills/CopilotPluginService.cs:118-130 — These two members are one piece of code written twice and then edited apart: 13 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (13 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/XarArchive.cs:155 — src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/XarArchive.cs:155-167 | src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/ZipApp.cs:62-79 — These two members are one piece of code written twice and then edited apart: 13 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (13 corresponding lines) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:1055 — src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:1055-1067 | src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:1166-1180 — These two members are one piece of code written twice and then edited apart: 13 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (8 corresponding lines) · ×6
  • Edited copy of a member (8 corresponding lines) src/UniGetUI.Avalonia/ViewModels/Pages/LogPages/UniGetUILogPageViewModel.cs:71 — src/UniGetUI.Avalonia/ViewModels/Pages/LogPages/UniGetUILogPageViewModel.cs:71-81 | src/UniGetUI.Tui/Views/Pages/LogsPage.cs:265-272 — These two members are one piece of code written twice and then edited apart: 8 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (8 corresponding lines) src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs:182 — src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs:182-189 | src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs:984-991 — These two members are one piece of code written twice and then edited apart: 8 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (8 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/PkgIndexCommand.cs:56 — src/UniGetUI.PackageEngine.Managers.MacPkg/PkgIndexCommand.cs:56-63 | src/UniGetUI.PackageEngine.Managers.WinInstaller/WinInstallerFeedInspector.cs:84-91 — These two members are one piece of code written twice and then edited apart: 8 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (8 corresponding lines) src/UniGetUI.Avalonia/Infrastructure/GitHubCloudBackupService.cs:43 — src/UniGetUI.Avalonia/Infrastructure/GitHubCloudBackupService.cs:43-56 | src/UniGetUI.Tui/Infrastructure/TuiCloudBackup.cs:197-204 — These two members are one piece of code written twice and then edited apart: 8 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (8 corresponding lines) src/UniGetUI.Avalonia/Views/Controls/Settings/CheckboxButtonCard.cs:27 — src/UniGetUI.Avalonia/Views/Controls/Settings/CheckboxButtonCard.cs:27-34 | src/UniGetUI.Avalonia/Views/Controls/Settings/SecureCheckboxCard.cs:40-49 — These two members are one piece of code written twice and then edited apart: 8 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (8 corresponding lines) src/UniGetUI.Avalonia/ViewModels/Controls/UserAvatarViewModel.cs:168 — src/UniGetUI.Avalonia/ViewModels/Controls/UserAvatarViewModel.cs:168-175 | src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/BackupViewModel.cs:439-446 — These two members are one piece of code written twice and then edited apart: 8 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Duplicated block (13 lines × 2) · ×6
  • Duplicated block (13 lines × 2) src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:201 — src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:201-213 | src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:252-264 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:201` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:266` calls `TryGetValue` and `src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:215` does not — after which the two agree again for 3 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
  • Duplicated block (13 lines × 2) src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs:372 — src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs:372-384 | src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs:398-410 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs:372` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs:371` calls `GetState` and `src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs:397` does not — after which the two agree again for 4 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
  • Duplicated block (13 lines × 2) src/UniGetUI.Avalonia/Infrastructure/WindowsAvaloniaRenderingPolicy.cs:154 — src/UniGetUI.Avalonia/Infrastructure/WindowsAvaloniaRenderingPolicy.cs:154-166 | src/UniGetUI.Avalonia/Infrastructure/WindowsAvaloniaRenderingPolicy.cs:193-205 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
  • Duplicated block (13 lines × 2) src/UniGetUI.PackageEngine.Managers.Bun/Helpers/BunPkgDetailsHelper.cs:186 — src/UniGetUI.PackageEngine.Managers.Bun/Helpers/BunPkgDetailsHelper.cs:186-198 | src/UniGetUI.PackageEngine.Managers.Npm/Helpers/NpmPkgDetailsHelper.cs:230-242 — before extracting anything, compare `src/UniGetUI.PackageEngine.Managers.Bun/Helpers/BunPkgDetailsHelper.cs` and `src/UniGetUI.PackageEngine.Managers.Npm/Helpers/NpmPkgDetailsHelper.cs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 105 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Bun/Helpers/BunPkgDetailsHelper.cs:186` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The `return` at the foot of the matched lines is the enclosing body's own terminal exit, not an early one: it moves with them unchanged, and each site calls the extracted unit from the position that `return` occupied — no decision has to be handed back and re-acted on.
  • Duplicated block (13 lines × 2) src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:201 — src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:201-213 | src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:215-227 — `src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs` and `src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs` are one unit implemented once per sibling directory, so they are most likely parallel implementations of one contract rather than a copy of each other — this scan matched 3 separate duplicated blocks between them, totalling at least 47 lines. If both are selected at run time, neither can be retired in favour of the other, and the lines that DIFFER between them are the reason both exist. The move that pays here is to hoist the identical part into a shared location the whole family can reach and give what differs a parameter or a seam, so a change lands once instead of once per sibling; extracting one helper per block leaves every sibling to drift on its own. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:201` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The `return` at the foot of the matched lines is the enclosing body's own terminal exit, not an early one: it moves with them unchanged, and each site calls the extracted unit from the position that `return` occupied — no decision has to be handed back and re-acted on.
  • Duplicated block (13 lines × 2) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/InternetViewModel.cs:89 — src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/InternetViewModel.cs:89-104 | src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/UpdatesViewModel.cs:46-58 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
D4 · Code Duplication · Edited copy of a member (26 corresponding lines) · ×5
  • Edited copy of a member (26 corresponding lines) src/UniGetUI.Core.Tools/AuthenticodeSignature.cs:118 — src/UniGetUI.Core.Tools/AuthenticodeSignature.cs:118-143 | src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/Interop/WindowsAuthenticodeTrustVerifier.cs:133-185 — These two members are one piece of code written twice and then edited apart: 26 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (26 corresponding lines) src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/Interop/WindowsAuthenticodeTrustVerifier.cs:133 — src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/Interop/WindowsAuthenticodeTrustVerifier.cs:133-185 | src/UniGetUI.Core.Tools/AuthenticodeSignature.cs:118-143 — These two members are one piece of code written twice and then edited apart: 26 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (26 corresponding lines) src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/PingetCliHelper.cs:215 — src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/PingetCliHelper.cs:215-240 | src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetCliHelper.cs:431-458 — These two members are one piece of code written twice and then edited apart: 26 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (26 corresponding lines) src/UniGetUI.PackageEngine.Managers.Bun/Bun.cs:297 — src/UniGetUI.PackageEngine.Managers.Bun/Bun.cs:297-322 | src/UniGetUI.PackageEngine.Managers.Npm/Npm.cs:554-581 — These two members are one piece of code written twice and then edited apart: 26 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (26 corresponding lines) src/UniGetUI.PackageEngine.Managers.Scoop/Helpers/ScoopPkgDetailsHelper.cs:221 — src/UniGetUI.PackageEngine.Managers.Scoop/Helpers/ScoopPkgDetailsHelper.cs:221-248 | src/UniGetUI.PackageEngine.Managers.Scoop/Helpers/ScoopPkgDetailsHelper.cs:251-276 — These two members are one piece of code written twice and then edited apart: 26 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (14 corresponding lines) · ×5
  • Edited copy of a member (14 corresponding lines) src/UniGetUI.Tui/FakeData/FakePackageManager.cs:122 — src/UniGetUI.Tui/FakeData/FakePackageManager.cs:122-139 | src/UniGetUI.Tui/FakeData/FakePackageManager.cs:142-155 — These two members are one piece of code written twice and then edited apart: 14 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (14 corresponding lines) src/UniGetUI.Avalonia/Views/Controls/Settings/CheckboxCard.cs:160 — src/UniGetUI.Avalonia/Views/Controls/Settings/CheckboxCard.cs:160-173 | src/UniGetUI.Avalonia/Views/Controls/Settings/CheckboxCard.cs:229-244 — These two members are one piece of code written twice and then edited apart: 14 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (14 corresponding lines) src/UniGetUI.Avalonia/Views/Controls/Settings/CheckboxCard.cs:190 — src/UniGetUI.Avalonia/Views/Controls/Settings/CheckboxCard.cs:190-204 | src/UniGetUI.Avalonia/Views/Controls/Settings/CheckboxCard.cs:210-223 — These two members are one piece of code written twice and then edited apart: 14 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (14 corresponding lines) src/UniGetUI.Interface.IpcApi/IpcDesktopShortcutsApi.cs:32 — src/UniGetUI.Interface.IpcApi/IpcDesktopShortcutsApi.cs:32-45 | src/UniGetUI.Interface.IpcApi/IpcStartMenuShortcutsApi.cs:60-75 — These two members are one piece of code written twice and then edited apart: 14 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (14 corresponding lines) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorStructuredUi.cs:315 — src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorStructuredUi.cs:315-328 | src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorStructuredUi.cs:331-344 — These two members are one piece of code written twice and then edited apart: 14 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (21 corresponding lines) · ×5
  • Edited copy of a member (21 corresponding lines) src/UniGetUI.PackageEngine.Managers.Dotnet/Helpers/NuGetConfigFiles.cs:124 — src/UniGetUI.PackageEngine.Managers.Dotnet/Helpers/NuGetConfigFiles.cs:124-154 | src/UniGetUI.PackageEngine.Managers.Dotnet/Helpers/NuGetConfigFiles.cs:160-180 — These two members are one piece of code written twice and then edited apart: 21 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (21 corresponding lines) src/UniGetUI.Avalonia/Models/PackageRowModel.cs:163 — src/UniGetUI.Avalonia/Models/PackageRowModel.cs:163-185 | src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:682-702 — These two members are one piece of code written twice and then edited apart: 21 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (21 corresponding lines) src/UniGetUI.PackageEngine.Managers.PowerShell/Helpers/PowerShellDetailsHelper.cs:12 — src/UniGetUI.PackageEngine.Managers.PowerShell/Helpers/PowerShellDetailsHelper.cs:12-32 | src/UniGetUI.PackageEngine.Managers.PowerShell7/Helpers/PowerShell7DetailsHelper.cs:12-32 — These two members are one piece of code written twice and then edited apart: 21 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (21 corresponding lines) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorStructuredUi.cs:476 — src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorStructuredUi.cs:476-496 | src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorStructuredUi.cs:499-519 — These two members are one piece of code written twice and then edited apart: 21 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (21 corresponding lines) src/UniGetUI.PackageEngine.Managers.Homebrew/Helpers/HomebrewSourceHelper.cs:21 — src/UniGetUI.PackageEngine.Managers.Homebrew/Helpers/HomebrewSourceHelper.cs:21-42 | src/UniGetUI.PackageEngine.Managers.Homebrew/Homebrew.cs:263-283 — These two members are one piece of code written twice and then edited apart: 21 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (4 corresponding lines) · ×5
  • Edited copy of a member (4 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgFeed.cs:226 — src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgFeed.cs:226-229 | src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/WinFeed.cs:134-137 — These two members are one piece of code written twice and then edited apart: 4 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (4 corresponding lines) src/UniGetUI.PackageEngine.Managers.WinInstaller/WinInstaller.cs:129 — src/UniGetUI.PackageEngine.Managers.WinInstaller/WinInstaller.cs:129-135 | src/UniGetUI.PackageEngine.Managers.MacPkg/MacPkg.cs:146-149 — These two members are one piece of code written twice and then edited apart: 4 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (4 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/MacPkg.cs:209 — src/UniGetUI.PackageEngine.Managers.MacPkg/MacPkg.cs:209-212 | src/UniGetUI.PackageEngine.Managers.WinInstaller/WinInstaller.cs:177-180 — These two members are one piece of code written twice and then edited apart: 4 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (4 corresponding lines) src/UniGetUI.Extensions.AgentSkills/AgentHostLocator.cs:268 — src/UniGetUI.Extensions.AgentSkills/AgentHostLocator.cs:268-271 | src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/SystemWinGetLocator.cs:128-133 — These two members are one piece of code written twice and then edited apart: 4 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (4 corresponding lines) src/UniGetUI.Avalonia/Infrastructure/GitHubCloudBackupService.cs:118 — src/UniGetUI.Avalonia/Infrastructure/GitHubCloudBackupService.cs:118-121 | src/UniGetUI.Interface.IpcApi/IpcBackupApi.cs:513-519 — These two members are one piece of code written twice and then edited apart: 4 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D29 · Static Analysis (SAST) · REDACTED · ×4
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D4 · Code Duplication · Edited copy of a member (28 corresponding lines) · ×4
  • Edited copy of a member (28 corresponding lines) src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetCliHelper.cs:231 — src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetCliHelper.cs:231-272 | src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetCliHelper.cs:401-428 — These two members are one piece of code written twice and then edited apart: 28 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (28 corresponding lines) src/UniGetUI.PackageEngine.Managers.PowerShell/PowerShell.cs:194 — src/UniGetUI.PackageEngine.Managers.PowerShell/PowerShell.cs:194-221 | src/UniGetUI.PackageEngine.Managers.PowerShell7/PowerShell7.cs:138-173 — These two members are one piece of code written twice and then edited apart: 28 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (28 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/PkgIndexCommand.cs:24 — src/UniGetUI.PackageEngine.Managers.MacPkg/PkgIndexCommand.cs:24-51 | src/UniGetUI.PackageEngine.Managers.WinInstaller/WinInstallerFeedInspector.cs:51-81 — These two members are one piece of code written twice and then edited apart: 28 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (28 corresponding lines) src/UniGetUI.PackageEngine.Managers.Homebrew/Helpers/HomebrewPkgOperationHelper.cs:17 — src/UniGetUI.PackageEngine.Managers.Homebrew/Helpers/HomebrewPkgOperationHelper.cs:17-45 | src/UniGetUI.PackageEngine.Managers.Flatpak/Helpers/FlatpakPkgOperationHelper.cs:17-44 — These two members are one piece of code written twice and then edited apart: 28 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (18 corresponding lines) · ×4
  • Edited copy of a member (18 corresponding lines) src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs:236 — src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs:236-256 | src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs:1060-1077 — These two members are one piece of code written twice and then edited apart: 18 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (18 corresponding lines) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyValidationFinding.cs:658 — src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyValidationFinding.cs:658-675 | src/UniGetUI.PackageEngine.AgentBroker/PolicyManagement/BrokerPolicyManagementService.cs:356-376 — These two members are one piece of code written twice and then edited apart: 18 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (18 corresponding lines) src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:1493 — src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:1493-1510 | src/UniGetUI.Avalonia/Infrastructure/MicaWindowHelper.cs:170-190 — These two members are one piece of code written twice and then edited apart: 18 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (18 corresponding lines) src/UniGetUI.Core.Tools/Scheduling/MaintenanceScheduleStore.cs:81 — src/UniGetUI.Core.Tools/Scheduling/MaintenanceScheduleStore.cs:81-98 | src/UniGetUI.Core.Tools/Scheduling/MaintenanceScheduleStore.cs:124-141 — These two members are one piece of code written twice and then edited apart: 18 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Duplicated block (19 lines × 2) · ×4
  • Duplicated block (19 lines × 2) src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:409 — src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:409-427 | src/UniGetUI.Tui/Infrastructure/TuiBundleService.cs:53-71 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
  • Duplicated block (19 lines × 2) REDACTED:1876 — REDACTED:1876-1894 | REDACTED:1901-1919 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit. Note first that the copies are not typed on the same thing: the declarations holding them bind `action` to `Func<IpcPackageActionRequest, Task<IpcPackageOperationResult>>` in one and `Func<IpcCommandResult>` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
  • Duplicated block (19 lines × 2) src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/ManagerLogger.cs:231 — src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/ManagerLogger.cs:231-251 | src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/ManagerLogger.cs:405-423 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/ManagerLogger.cs:231` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (19 lines × 2) src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/NativeWinGetHelper.cs:547 — src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/NativeWinGetHelper.cs:547-569 | src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/NativeWinGetHelper.cs:788-806 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/NativeWinGetHelper.cs:547` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
D4 · Code Duplication · Duplicated block (15 lines × 2) · ×4
  • Duplicated block (15 lines × 2) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyValidationFinding.cs:26 — src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyValidationFinding.cs:26-40 | src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyValidationFinding.cs:44-58 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit. Note first that the copies are not typed on the same thing: the declarations holding them bind `finding` to `PolicyFinding` in one and `BrokerPolicySanitizedFinding` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
  • Duplicated block (15 lines × 2) src/UniGetUI.Avalonia/Views/Controls/PackageIconLoader.cs:24 — src/UniGetUI.Avalonia/Views/Controls/PackageIconLoader.cs:24-38 | src/UniGetUI.Avalonia/Views/Controls/PackageRowValueLoader.cs:18-32 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
  • Duplicated block (15 lines × 2) src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:1203 — src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:1203-1217 | src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:1453-1468 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:1203` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
  • Duplicated block (15 lines × 2) src/UniGetUI.PackageEngine.Managers.Flatpak/FlatpakParsing.cs:30 — src/UniGetUI.PackageEngine.Managers.Flatpak/FlatpakParsing.cs:30-44 | src/UniGetUI.PackageEngine.Managers.Flatpak/FlatpakParsing.cs:78-92 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Flatpak/FlatpakParsing.cs:30` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
D4 · Code Duplication · Duplicated block (10 lines × 2) · ×4
  • Duplicated block (10 lines × 2) src/UniGetUI.AgentSkills.Cli/Update.cs:497 — src/UniGetUI.AgentSkills.Cli/Update.cs:497-506 | src/UniGetUI.AgentSkills.Cli/Update.cs:694-703 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.AgentSkills.Cli/Update.cs:497` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (10 lines × 2) src/UniGetUI.PackageEngine.Managers.Scoop/Helpers/ScoopTable.cs:40 — src/UniGetUI.PackageEngine.Managers.Scoop/Helpers/ScoopTable.cs:40-49 | src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/ManagerTable.cs:39-48 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/ManagerTable.cs:39` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
  • Duplicated block (10 lines × 2) src/UniGetUI.Avalonia/ViewModels/Pages/AboutPages/ContributorsViewModel.cs:28 — src/UniGetUI.Avalonia/ViewModels/Pages/AboutPages/ContributorsViewModel.cs:28-37 | src/UniGetUI.Avalonia/ViewModels/Pages/AboutPages/TranslatorsViewModel.cs:30-39 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
  • Duplicated block (10 lines × 2) src/UniGetUI.PackageEngine.AgentBroker/BrokerPolicyDocumentValidator.cs:55 — src/UniGetUI.PackageEngine.AgentBroker/BrokerPolicyDocumentValidator.cs:55-64 | src/UniGetUI.PackageEngine.AgentBroker/BrokerPolicyInspector.cs:140-149 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
D4 · Code Duplication · Duplicated block (7 lines × 2) · ×4
  • Duplicated block (7 lines × 2) src/UniGetUI.Avalonia/Views/DialogPages/PackageDetailsWindow.axaml.cs:645 — src/UniGetUI.Avalonia/Views/DialogPages/PackageDetailsWindow.axaml.cs:645-651 | src/UniGetUI.Avalonia/Views/DialogPages/PackageDetailsWindow.axaml.cs:678-684 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
  • Duplicated block (7 lines × 2) src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:1198 — src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:1198-1204 | src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:1206-1212 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
  • Duplicated block (7 lines × 2) src/UniGetUI.Tui/Infrastructure/TuiFocus.cs:33 — src/UniGetUI.Tui/Infrastructure/TuiFocus.cs:33-45 | src/UniGetUI.Tui/Infrastructure/TuiFocus.cs:65-71 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.Tui/Infrastructure/TuiFocus.cs:33` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (7 lines × 2) src/UniGetUI.Avalonia/ViewModels/Controls/UserAvatarViewModel.cs:169 — src/UniGetUI.Avalonia/ViewModels/Controls/UserAvatarViewModel.cs:169-175 | src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/BackupViewModel.cs:440-446 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
D17 · Explicit Debt · BarePragmaDisable · ×3
  • BarePragmaDisable src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:1884 — #pragma warning disable SYSLIB0057 — the disable is closed again below, so its scope is not the problem; what it records is no reason: there is nothing on the directive line, and no ordinary comment attached to it either side. A suppression is a decision somebody made, and without the reason the next reader cannot tell a considered exception from an unexamined one, so it is never revisited and it outlives the code it was written for. Put the reason on the directive line — what makes this site legitimately different — or fix what the rule is pointing at and delete the pair. A rationale in the member's documentation comment does not clear this row and is not meant to: it explains the member to its callers, and the next person to touch the suppression is not reading it for that.
  • BarePragmaDisable src/UniGetUI.Core.Tools/AuthenticodeSignature.cs:172 — #pragma warning disable CS0649 — the disable is closed again below, so its scope is not the problem; what it records is no reason: there is nothing on the directive line, and no ordinary comment attached to it either side. A suppression is a decision somebody made, and without the reason the next reader cannot tell a considered exception from an unexamined one, so it is never revisited and it outlives the code it was written for. Put the reason on the directive line — what makes this site legitimately different — or fix what the rule is pointing at and delete the pair. A rationale in the member's documentation comment does not clear this row and is not meant to: it explains the member to its callers, and the next person to touch the suppression is not reading it for that.
  • BarePragmaDisable src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetIconsHelper.cs:29 — #pragma warning disable SYSLIB0014 — the disable is closed again below, so its scope is not the problem; what it records is no reason: there is nothing on the directive line, and no ordinary comment attached to it either side. A suppression is a decision somebody made, and without the reason the next reader cannot tell a considered exception from an unexamined one, so it is never revisited and it outlives the code it was written for. Put the reason on the directive line — what makes this site legitimately different — or fix what the rule is pointing at and delete the pair. A rationale in the member's documentation comment does not clear this row and is not meant to: it explains the member to its callers, and the next person to touch the suppression is not reading it for that.
D35 · Change Coupling · Change coupling · ×3
  • Change coupling: PingetCliHelper.cs ↔ WinGetCliHelper.cs src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/PingetCliHelper.cs:1 — `src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/PingetCliHelper.cs` and `src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetCliHelper.cs` change together 58% of the time (7 of the 12 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets). They sit in the same directory, and in this ecosystem sibling files there normally share one namespace/package — so a direct reference between them needs no import and this pass cannot see whether one exists. Read the pair before acting: if one file only DECLARES what the other consumes (a constants/types file beside its user), the co-change is definitional and the question is whether the split earns its keep; if they duplicate structure, extract the common part into a shared function or type they both call; if neither holds, the coupling is hidden and worth breaking. You can check this without leaving the row: of the 7 shared commits counted here, the most recent 3 are `9c8a18cf` Allow an empty Discover search to list every WinGet package (#5536); `402385f8` Resolve junctions in the elevated WinGet TEMP folder (#5526); `fe5a6f94` Fix MSIX installer manifests and mark unverified versions (#5369) — run `git show` on any of them.
  • Change coupling: BaseSourceHelper.cs ↔ PackageManager.cs src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Helpers/BaseSourceHelper.cs:1 — `src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Helpers/BaseSourceHelper.cs` and `src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/PackageManager.cs` change together 55% of the time (6 of the 11 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets). They sit in different directories, but in this ecosystem the namespace is declared in the FILE, not by the folder — so the two may well share one namespace and reference each other with no import for this pass to see. Read the pair before acting: if one derives from or overrides the other, the dependency is explicit in the type declaration and the co-change is definitional; if one registers itself into the other through a hook or an initialiser, the missing dependency is DELIBERATE and the thing to add is a comment saying so; if they simply belong together, co-locate them; if none of these holds, the coupling is hidden and worth breaking. You can check this without leaving the row: of the 6 shared commits counted here, the most recent 3 are `8a788eba` Improve error handling of tasks that are not waited anymore due to a …; `0cb3180b` improvements to package manager initialization process, separe steps …; `85432e5a` Scoop will also take advantage of the TaskRecycler to fetch installed… (at that commit the file was still `src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/BaseProviders/BaseSourceProvider.cs`) — run `git show` on any of them.
  • Change coupling: ImportedPackage.cs ↔ InvalidImportedPackage.cs src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/ImportedPackage.cs:1 — `src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/ImportedPackage.cs` and `src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/InvalidImportedPackage.cs` change together 53% of the time (8 of the 15 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets). They sit in the same directory, and in this ecosystem sibling files there normally share one namespace/package — so a direct reference between them needs no import and this pass cannot see whether one exists. Read the pair before acting: if one file only DECLARES what the other consumes (a constants/types file beside its user), the co-change is definitional and the question is whether the split earns its keep; if they duplicate structure, extract the common part into a shared function or type they both call; if neither holds, the coupling is hidden and worth breaking. You can check this without leaving the row: of the 8 shared commits counted here, the most recent 3 are `b736458b` fix import tree; `04cf96fa` Migrate SerializablePackage; `9c92fb38` Revame Version to VersionString — run `git show` on any of them.
D36 · Supply-chain Provenance & Signing · REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D4 · Code Duplication · Edited copy of a member (25 corresponding lines) · ×3
  • Edited copy of a member (25 corresponding lines) src/UniGetUI.Avalonia/ViewModels/DialogPages/ManageIgnoredUpdatesViewModel.cs:54 — src/UniGetUI.Avalonia/ViewModels/DialogPages/ManageIgnoredUpdatesViewModel.cs:54-107 | src/UniGetUI.Tui/Views/Dialogs/IgnoredUpdatesDialog.cs:21-45 — These two members are one piece of code written twice and then edited apart: 25 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (25 corresponding lines) src/UniGetUI.PackageEngine.Operations/DownloadOperation.cs:21 — src/UniGetUI.PackageEngine.Operations/DownloadOperation.cs:21-45 | src/UniGetUI.PackageEngine.Operations/WinGetManifestDownloadOperation.cs:19-49 — These two members are one piece of code written twice and then edited apart: 25 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (25 corresponding lines) REDACTED:1010 — REDACTED:1010-1035 | REDACTED:1038-1062 — These two members are one piece of code written twice and then edited apart: 25 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (12 corresponding lines) · ×3
  • Edited copy of a member (12 corresponding lines) src/UniGetUI.Avalonia/ViewModels/Pages/LogPages/BaseLogPageViewModel.cs:44 — src/UniGetUI.Avalonia/ViewModels/Pages/LogPages/BaseLogPageViewModel.cs:44-55 | src/UniGetUI.Avalonia/ViewModels/Pages/LogPages/BaseLogPageViewModel.cs:58-70 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (12 corresponding lines) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorMapper.cs:118 — src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorMapper.cs:118-130 | src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorMapper.cs:283-294 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (12 corresponding lines) src/UniGetUI.Avalonia/Models/PackageCollections.cs:577 — src/UniGetUI.Avalonia/Models/PackageCollections.cs:577-588 | src/UniGetUI.Avalonia/Models/PackageCollections.cs:702-713 — These two members are one piece of code written twice and then edited apart: 12 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (20 corresponding lines) · ×3
  • Edited copy of a member (20 corresponding lines) src/UniGetUI.Extensions.AgentSkills/AgentHostLocator.cs:238 — src/UniGetUI.Extensions.AgentSkills/AgentHostLocator.cs:238-257 | src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/SystemWinGetLocator.cs:68-117 — These two members are one piece of code written twice and then edited apart: 20 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (20 corresponding lines) src/UniGetUI.Avalonia/Infrastructure/MacOsNotificationBridge.cs:29 — src/UniGetUI.Avalonia/Infrastructure/MacOsNotificationBridge.cs:29-48 | src/UniGetUI.Avalonia/Infrastructure/MacOsNotificationBridge.cs:69-88 — These two members are one piece of code written twice and then edited apart: 20 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (20 corresponding lines) src/Shared/SharedPreUiCommandDispatcher.cs:293 — src/Shared/SharedPreUiCommandDispatcher.cs:293-312 | src/Shared/SharedPreUiCommandDispatcher.cs:315-334 — These two members are one piece of code written twice and then edited apart: 20 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (39 corresponding lines) · ×3
  • Edited copy of a member (39 corresponding lines) src/UniGetUI.PackageEngine.Managers.Flatpak/FlatpakParsing.cs:71 — src/UniGetUI.PackageEngine.Managers.Flatpak/FlatpakParsing.cs:71-109 | src/UniGetUI.PackageEngine.Managers.Snap/SnapParsing.cs:50-90 — These two members are one piece of code written twice and then edited apart: 39 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (39 corresponding lines) src/UniGetUI.PackageEngine.Managers.Bun/Helpers/BunPkgDetailsHelper.cs:160 — src/UniGetUI.PackageEngine.Managers.Bun/Helpers/BunPkgDetailsHelper.cs:160-198 | src/UniGetUI.PackageEngine.Managers.Npm/Helpers/NpmPkgDetailsHelper.cs:195-242 — These two members are one piece of code written twice and then edited apart: 39 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (39 corresponding lines) src/UniGetUI.PackageEngine.Operations/SourceOperations.cs:187 — src/UniGetUI.PackageEngine.Operations/SourceOperations.cs:187-225 | src/UniGetUI.PackageEngine.Operations/SourceOperations.cs:251-289 — These two members are one piece of code written twice and then edited apart: 39 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (17 corresponding lines) · ×3
  • Edited copy of a member (17 corresponding lines) src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs:167 — src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs:167-183 | src/UniGetUI.PackageEngine.Managers.Pip/Pip.cs:112-128 — These two members are one piece of code written twice and then edited apart: 17 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (17 corresponding lines) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/BackupViewModel.cs:168 — src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/BackupViewModel.cs:168-186 | src/UniGetUI.Tui/Infrastructure/TuiMaintenance.cs:268-284 — These two members are one piece of code written twice and then edited apart: 17 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (17 corresponding lines) src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetTableLayout.cs:356 — src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetTableLayout.cs:356-372 | src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetTableLayout.cs:375-391 — These two members are one piece of code written twice and then edited apart: 17 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Duplicated block (17 lines × 2) · ×3
  • Duplicated block (17 lines × 2) REDACTED:746 — REDACTED:746-762 | REDACTED:807-823 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `REDACTED:746` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (17 lines × 2) src/UniGetUI.PackageEngine.Managers.Dotnet/DotNet.cs:258 — src/UniGetUI.PackageEngine.Managers.Dotnet/DotNet.cs:258-274 | src/UniGetUI.PackageEngine.Managers.Scoop/Scoop.cs:376-392 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Dotnet/DotNet.cs:258` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (17 lines × 2) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs:318 — src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs:318-334 | src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs:373-389 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs:318` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
D4 · Code Duplication · Duplicated block (14 lines × 2) · ×3
  • Duplicated block (14 lines × 2) src/UniGetUI.Avalonia/Infrastructure/WindowsAppNotificationBridge.cs:142 — src/UniGetUI.Avalonia/Infrastructure/WindowsAppNotificationBridge.cs:142-155 | src/UniGetUI.Avalonia/Infrastructure/WindowsAppNotificationBridge.cs:184-197 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.Avalonia/Infrastructure/WindowsAppNotificationBridge.cs:142` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (14 lines × 2) src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:169 — src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:169-182 | src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs:163-176 — `src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs` and `src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs` are one unit implemented once per sibling directory, so they are most likely parallel implementations of one contract rather than a copy of each other — this scan matched 5 separate duplicated blocks between them, totalling at least 99 lines. If both are selected at run time, neither can be retired in favour of the other, and the lines that DIFFER between them are the reason both exist. The move that pays here is to hoist the identical part into a shared location the whole family can reach and give what differs a parameter or a seam, so a change lands once instead of once per sibling; extracting one helper per block leaves every sibling to drift on its own. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:169` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The `return` at the foot of the matched lines is the enclosing body's own terminal exit, not an early one: it moves with them unchanged, and each site calls the extracted unit from the position that `return` occupied — no decision has to be handed back and re-acted on.
  • Duplicated block (14 lines × 2) src/UniGetUI.PackageEngine.Managers.PowerShell/PowerShell.cs:156 — src/UniGetUI.PackageEngine.Managers.PowerShell/PowerShell.cs:156-169 | src/UniGetUI.PackageEngine.Managers.PowerShell7/PowerShell7.cs:197-210 — `src/UniGetUI.PackageEngine.Managers.PowerShell/PowerShell.cs` and `src/UniGetUI.PackageEngine.Managers.PowerShell7/PowerShell7.cs` are one unit implemented once per sibling directory, so they are most likely parallel implementations of one contract rather than a copy of each other — this scan matched 4 separate duplicated blocks between them, totalling at least 85 lines. If both are selected at run time, neither can be retired in favour of the other, and the lines that DIFFER between them are the reason both exist. The move that pays here is to hoist the identical part into a shared location the whole family can reach and give what differs a parameter or a seam, so a change lands once instead of once per sibling; extracting one helper per block leaves every sibling to drift on its own. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
D4 · Code Duplication · Duplicated block (9 lines × 2) · ×3
  • Duplicated block (9 lines × 2) src/UniGetUI.AgentSkills.Cli/Ui.cs:617 — src/UniGetUI.AgentSkills.Cli/Ui.cs:617-625 | src/UniGetUI.AgentSkills.Cli/Ui.cs:726-734 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.AgentSkills.Cli/Ui.cs:617` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
  • Duplicated block (9 lines × 2) src/UniGetUI.AgentSkills.Cli/GhInstalled.cs:104 — src/UniGetUI.AgentSkills.Cli/GhInstalled.cs:104-112 | src/UniGetUI.AgentSkills.Cli/Validate.cs:619-627 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
  • Duplicated block (9 lines × 2) src/UniGetUI.AgentSkills.Cli/Sync.cs:92 — src/UniGetUI.AgentSkills.Cli/Sync.cs:92-100 | src/UniGetUI.AgentSkills/InstallRecords.cs:195-203 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
X1 · Async correctness · Sync-over-async (deadlock risk) through `.Result` · ×3
  • Sync-over-async (deadlock risk) through `.Result` src/UniGetUI.Avalonia/CrashHandler.cs:199 — Reading `.Result` of a task that has not completed blocks this thread until it does — the same block as `.Wait()`: under a synchronization context (Blazor, a UI thread, classic ASP.NET) it deadlocks, and on the thread pool it parks a thread for as long as the work runs. `await` the task instead (make the caller `async`); where a synchronous entry point must stay, keep the block in ONE documented bridge with a timeout.
  • Sync-over-async (deadlock risk) through `.Result` src/UniGetUI.Avalonia/ViewModels/DialogPages/CatalogEditorViewModel.cs:125 — Reading `.Result` of a task that has not completed blocks this thread until it does — the same block as `.Wait()`: under a synchronization context (Blazor, a UI thread, classic ASP.NET) it deadlocks, and on the thread pool it parks a thread for as long as the work runs. `await` the task instead (make the caller `async`); where a synchronous entry point must stay, keep the block in ONE documented bridge with a timeout.
  • Sync-over-async (deadlock risk) through `.Result` src/UniGetUI.Avalonia/ViewModels/Pages/GitRepositoriesViewModel.cs:801 — Reading `.Result` of a task that has not completed blocks this thread until it does — the same block as `.Wait()`: under a synchronization context (Blazor, a UI thread, classic ASP.NET) it deadlocks, and on the thread pool it parks a thread for as long as the work runs. `await` the task instead (make the caller `async`); where a synchronous entry point must stay, keep the block in ONE documented bridge with a timeout.
X18 · Disposal-pattern correctness · Disposes a dependency it does not own · ×3
  • Disposes a dependency it does not own src/UniGetUI.AgentPolicy.ElevatedHelper/AuthenticatedBrokerTransport.cs:231 — `_location` is a `PolicyElevationLocationVerification` that `AuthenticatedBrokerServer` never creates — every assignment to it takes a constructor parameter — and this type disposes it here (line 231). The caller that hands it over at `new AuthenticatedBrokerServer(process, location)` (AuthenticatedBrokerTransport.cs line 217) releases the same value itself, so it kept ownership: this release is a second one, on a value that is still the caller's, and it ends the caller's instance while the caller may still be using it. Drop the call and leave the release to the caller that created the value — or, if this type is meant to own it, stop releasing it at the construction site so ownership is stated once.
  • Disposes a dependency it does not own src/UniGetUI.AgentPolicy.ElevatedHelper/AuthenticatedBrokerTransport.cs:232 — `_process` is a `SafeProcessHandle` that `AuthenticatedBrokerServer` never creates — every assignment to it takes a constructor parameter — and this type disposes it here (line 232). The caller that hands it over at `new AuthenticatedBrokerServer(process, location)` (AuthenticatedBrokerTransport.cs line 217) releases the same value itself, so it kept ownership: this release is a second one, on a value that is still the caller's, and it ends the caller's instance while the caller may still be using it. Drop the call and leave the release to the caller that created the value — or, if this type is meant to own it, stop releasing it at the construction site so ownership is stated once.
  • Disposes a dependency it does not own src/UniGetUI.AgentPolicy.ElevatedHelper/Program.cs:401 — `Host` is a `SafeProcessHandle` that `AuthenticatedHostContext` never creates — every assignment to it takes a constructor parameter — and this type disposes it here (line 401). The caller that hands it over at `new AuthenticatedHostContext( verification, host, expectation, trustVerifier,...` (Program.cs line 262) releases the same value itself, so it kept ownership: this release is a second one, on a value that is still the caller's, and it ends the caller's instance while the caller may still be using it. Drop the call and leave the release to the caller that created the value — or, if this type is meant to own it, stop releasing it at the construction site so ownership is stated once.
X18 · Disposal-pattern correctness · Disposable created and abandoned in the method that made it · ×3
  • Disposable created and abandoned in the method that made it src/UniGetUI.PackageEngine.Managers.MacPkg/PkgHelperCommand.cs:222 — `writeLock` is a `SemaphoreSlim`, which implements `IDisposable`, and it is created here (line 222). Every use of it in `HandleAsync` reads a member through it — it is never returned, never stored, never handed to anything else, and never disposed — so this method both creates the value and is the last thing that can release it, and does not. Nothing announces the leak: the object holds its resource until finalization if its type has a finalizer, and until the process ends if it does not, so the cost accumulates once per CALL rather than showing up as a failure. Declare it with `using` (`using var writeLock = …;`), which releases it at the end of the scope on every path including a throw.
  • Disposable created and abandoned in the method that made it src/UniGetUI.PackageEngine.Managers.Dotnet/DotNet.cs:192 — `process` is a `Process`, which implements `IDisposable`, and it is created here (line 192). Every use of it in `_loadManagerExecutableFile` reads a member through it — it is never returned, never stored, never handed to anything else, and never disposed — so this method both creates the value and is the last thing that can release it, and does not. Nothing announces the leak: the object holds its resource until finalization if its type has a finalizer, and until the process ends if it does not, so the cost accumulates once per CALL rather than showing up as a failure. Declare it with `using` (`using var process = …;`), which releases it at the end of the scope on every path including a throw.
  • Disposable created and abandoned in the method that made it src/UniGetUI.PackageEngine.Managers.Dotnet/DotNet.cs:212 — `process` is a `Process`, which implements `IDisposable`, and it is created here (line 212). Every use of it in `_loadManagerVersion` reads a member through it — it is never returned, never stored, never handed to anything else, and never disposed — so this method both creates the value and is the last thing that can release it, and does not. Nothing announces the leak: the object holds its resource until finalization if its type has a finalizer, and until the process ends if it does not, so the cost accumulates once per CALL rather than showing up as a failure. Declare it with `using` (`using var process = …;`), which releases it at the end of the scope on every path including a throw.
D17 · Explicit Debt · CommentedOutCode · ×2
  • CommentedOutCode src/UniGetUI.Core.Language.Tests/LanguageEngineTests.cs:141 — 3 consecutive commented-code lines
  • CommentedOutCode src/UniGetUI.PackageEngine.Managers.Pip/Pip.cs:50 — 22 consecutive commented-code lines
D29 · Static Analysis (SAST) · REDACTED · ×2
  • REDACTED
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED · ×2
  • REDACTED
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED · ×2
  • REDACTED
  • REDACTED
D4 · Code Duplication · Members sharing a duplicated core (5 members, 50+ identical tokens) · ×2
  • Members sharing a duplicated core (5 members, 50+ identical tokens) REDACTED:1620 — REDACTED:1620-1649 | REDACTED:1652-1679 | REDACTED:1754-1784 | REDACTED:1843-1872 | REDACTED:1925-1952 — These 5 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 5 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 5 times.
  • Members sharing a duplicated core (5 members, 50+ identical tokens) src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:185 — src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:185-227 | src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:230-280 | src/UniGetUI.PackageEngine.Managers.Homebrew/Homebrew.cs:230-253 | src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs:179-217 | src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs:220-260 — These 5 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 5 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 5 times.
D4 · Code Duplication · Edited copy of a member (50 corresponding lines) · ×2
  • Edited copy of a member (50 corresponding lines) src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:435 — src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:435-489 | src/UniGetUI.Tui/Infrastructure/TuiBundleService.cs:101-150 — These two members are one piece of code written twice and then edited apart: 50 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (50 corresponding lines) src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:622 — src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:622-704 | src/UniGetUI.Tui/Infrastructure/TuiBundleService.cs:278-327 — These two members are one piece of code written twice and then edited apart: 50 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (34 corresponding lines) · ×2
  • Edited copy of a member (34 corresponding lines) src/UniGetUI.Interface.Telemetry/TelemetryHandler.cs:264 — src/UniGetUI.Interface.Telemetry/TelemetryHandler.cs:264-306 | src/UniGetUI.Interface.Telemetry/TelemetryHandler.cs:350-383 — These two members are one piece of code written twice and then edited apart: 34 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (34 corresponding lines) src/UniGetUI.PackageEngine.Managers.Bun/Helpers/BunPkgOperationHelper.cs:15 — src/UniGetUI.PackageEngine.Managers.Bun/Helpers/BunPkgOperationHelper.cs:15-48 | src/UniGetUI.PackageEngine.Managers.Npm/Helpers/NpmPkgOperationHelper.cs:19-58 — These two members are one piece of code written twice and then edited apart: 34 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (27 corresponding lines) · ×2
  • Edited copy of a member (27 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/PkgFeedInspector.cs:17 — src/UniGetUI.PackageEngine.Managers.MacPkg/PkgFeedInspector.cs:17-48 | src/UniGetUI.PackageEngine.Managers.WinInstaller/WinInstallerFeedInspector.cs:11-37 — These two members are one piece of code written twice and then edited apart: 27 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (27 corresponding lines) src/UniGetUI.Interface.IpcApi/IpcDesktopShortcutsApi.cs:50 — src/UniGetUI.Interface.IpcApi/IpcDesktopShortcutsApi.cs:50-76 | src/UniGetUI.Interface.IpcApi/IpcStartMenuShortcutsApi.cs:80-106 — These two members are one piece of code written twice and then edited apart: 27 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (37 corresponding lines) · ×2
  • Edited copy of a member (37 corresponding lines) src/UniGetUI.Avalonia/Infrastructure/WindowsAppNotificationBridge.cs:141 — src/UniGetUI.Avalonia/Infrastructure/WindowsAppNotificationBridge.cs:141-177 | src/UniGetUI.Avalonia/Infrastructure/WindowsAppNotificationBridge.cs:183-222 — These two members are one piece of code written twice and then edited apart: 37 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (37 corresponding lines) src/UniGetUI.Avalonia/Models/PackageCollections.cs:527 — src/UniGetUI.Avalonia/Models/PackageCollections.cs:527-563 | src/UniGetUI.Avalonia/Models/PackageCollections.cs:649-685 — These two members are one piece of code written twice and then edited apart: 37 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (30 corresponding lines) · ×2
  • Edited copy of a member (30 corresponding lines) src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:114 — src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:114-164 | src/UniGetUI.Tui/Infrastructure/TuiMaintenance.cs:124-153 — These two members are one piece of code written twice and then edited apart: 30 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (30 corresponding lines) src/UniGetUI.Avalonia/ViewModels/Pages/ManagerHealthViewModel.cs:102 — src/UniGetUI.Avalonia/ViewModels/Pages/ManagerHealthViewModel.cs:102-140 | src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PackageManagerViewModel.cs:233-262 — These two members are one piece of code written twice and then edited apart: 30 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (41 corresponding lines) · ×2
  • Edited copy of a member (41 corresponding lines) src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs:375 — src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs:375-418 | src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs:421-461 — These two members are one piece of code written twice and then edited apart: 41 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (41 corresponding lines) src/UniGetUI.PackageEngine.Managers.PowerShell/Helpers/PowerShellSourceHelper.cs:57 — src/UniGetUI.PackageEngine.Managers.PowerShell/Helpers/PowerShellSourceHelper.cs:57-97 | src/UniGetUI.PackageEngine.Managers.PowerShell7/Helpers/PowerShell7SourceHelper.cs:57-101 — These two members are one piece of code written twice and then edited apart: 41 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (24 corresponding lines) · ×2
  • Edited copy of a member (24 corresponding lines) src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs:362 — src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs:362-386 | src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs:389-412 — These two members are one piece of code written twice and then edited apart: 24 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (24 corresponding lines) src/UniGetUI.Core.LanguageEngine/LanguageData.cs:56 — src/UniGetUI.Core.LanguageEngine/LanguageData.cs:56-79 | src/UniGetUI.Core.LanguageEngine/LanguageData.cs:82-108 — These two members are one piece of code written twice and then edited apart: 24 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (19 corresponding lines) · ×2
  • Edited copy of a member (19 corresponding lines) src/UniGetUI.AgentSkills.Cli/Notion.cs:196 — src/UniGetUI.AgentSkills.Cli/Notion.cs:196-216 | src/UniGetUI.AgentSkills/NotionFeed.cs:64-82 — These two members are one piece of code written twice and then edited apart: 19 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (19 corresponding lines) src/UniGetUI.Core.Tools/UpdaterDownloadEngine.cs:528 — src/UniGetUI.Core.Tools/UpdaterDownloadEngine.cs:528-546 | src/UniGetUI.Core.Tools/UpdaterDownloadEngine.cs:552-570 — These two members are one piece of code written twice and then edited apart: 19 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copies of one member (3 members, 20+ corresponding lines) · ×2
  • Edited copies of one member (3 members, 20+ corresponding lines) REDACTED:637 — REDACTED:637-656 | REDACTED:1576-1595 | REDACTED:1598-1617 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 20 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
  • Edited copies of one member (3 members, 20+ corresponding lines) src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:79 — src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:79-98 | src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs:79-100 | src/UniGetUI.PackageEngine.Managers.Snap/Snap.cs:83-102 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 20 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication · Edited copies of one member (4 members, 11+ corresponding lines) · ×2
  • Edited copies of one member (4 members, 11+ corresponding lines) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/BackupViewModel.cs:122 — src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/BackupViewModel.cs:122-133 | src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/InstallOptionsPanelViewModel.cs:291-301 | src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/OperationsViewModel.cs:41-57 | src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PackageManagerViewModel.cs:295-306 — These 4 members are one piece of code written 4 times and then edited apart: every two of them correspond over at least 11 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 4 times and the copies will drift further apart.
  • Edited copies of one member (4 members, 11+ corresponding lines) src/UniGetUI.Avalonia/Views/SoftwarePages/DiscoverSoftwarePage.cs:328 — src/UniGetUI.Avalonia/Views/SoftwarePages/DiscoverSoftwarePage.cs:328-338 | src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:321-331 | src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:220-230 | src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:359-370 — These 4 members are one piece of code written 4 times and then edited apart: every two of them correspond over at least 11 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 4 times and the copies will drift further apart.
D4 · Code Duplication · Edited copy of a member (5 corresponding lines) · ×2
  • Edited copy of a member (5 corresponding lines) src/UniGetUI.Extensions.AgentSkills/Sources/SkillSourceListings.cs:72 — src/UniGetUI.Extensions.AgentSkills/Sources/SkillSourceListings.cs:72-77 | src/UniGetUI.Extensions.AgentSkills/AgentPluginCatalogCache.cs:116-120 — These two members are one piece of code written twice and then edited apart: 5 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (5 corresponding lines) src/UniGetUI.Core.IconStore/IconDatabase.cs:117 — src/UniGetUI.Core.IconStore/IconDatabase.cs:117-121 | src/UniGetUI.Core.Tools/UpdaterDownloadEngine.cs:617-621 — These two members are one piece of code written twice and then edited apart: 5 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (3 corresponding lines) · ×2
  • Edited copy of a member (3 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/Helpers/MacPkgOperationHelper.cs:39 — src/UniGetUI.PackageEngine.Managers.MacPkg/Helpers/MacPkgOperationHelper.cs:39-41 | src/UniGetUI.PackageEngine.Managers.WinInstaller/Helpers/WinInstallerOperationHelper.cs:32-34 — These two members are one piece of code written twice and then edited apart: 3 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
  • Edited copy of a member (3 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/MacPkg.cs:204 — src/UniGetUI.PackageEngine.Managers.MacPkg/MacPkg.cs:204-206 | src/UniGetUI.PackageEngine.Managers.WinInstaller/WinInstaller.cs:172-174 — These two members are one piece of code written twice and then edited apart: 3 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Duplicated block (30 lines × 2) · ×2
  • Duplicated block (30 lines × 2) src/UniGetUI.PackageEngine.Managers.Flatpak/Flatpak.cs:129 — src/UniGetUI.PackageEngine.Managers.Flatpak/Flatpak.cs:129-158 | src/UniGetUI.PackageEngine.Managers.Snap/Snap.cs:128-157 — `src/UniGetUI.PackageEngine.Managers.Flatpak/Flatpak.cs` and `src/UniGetUI.PackageEngine.Managers.Snap/Snap.cs` are one unit implemented once per sibling directory, so they are most likely parallel implementations of one contract rather than a copy of each other — this scan matched 4 separate duplicated blocks between them, totalling at least 112 lines. If both are selected at run time, neither can be retired in favour of the other, and the lines that DIFFER between them are the reason both exist. The move that pays here is to hoist the identical part into a shared location the whole family can reach and give what differs a parameter or a seam, so a change lands once instead of once per sibling; extracting one helper per block leaves every sibling to drift on its own. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
  • Duplicated block (30 lines × 2) src/UniGetUI.PackageEngine.Managers.Flatpak/Flatpak.cs:162 — src/UniGetUI.PackageEngine.Managers.Flatpak/Flatpak.cs:162-191 | src/UniGetUI.PackageEngine.Managers.Snap/Snap.cs:161-190 — `src/UniGetUI.PackageEngine.Managers.Flatpak/Flatpak.cs` and `src/UniGetUI.PackageEngine.Managers.Snap/Snap.cs` are one unit implemented once per sibling directory, so they are most likely parallel implementations of one contract rather than a copy of each other — this scan matched 4 separate duplicated blocks between them, totalling at least 112 lines. If both are selected at run time, neither can be retired in favour of the other, and the lines that DIFFER between them are the reason both exist. The move that pays here is to hoist the identical part into a shared location the whole family can reach and give what differs a parameter or a seam, so a change lands once instead of once per sibling; extracting one helper per block leaves every sibling to drift on its own. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
D4 · Code Duplication · Duplicated block (20 lines × 2) · ×2
  • Duplicated block (20 lines × 2) src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/Interop/WindowsProtectedLocationVerifier.cs:185 — src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/Interop/WindowsProtectedLocationVerifier.cs:185-204 | src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/Interop/WindowsProtectedLocationVerifier.cs:238-257 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/Interop/WindowsProtectedLocationVerifier.cs:185` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
  • Duplicated block (20 lines × 2) src/UniGetUI.PackageEngine.Managers.Bun/Bun.cs:268 — src/UniGetUI.PackageEngine.Managers.Bun/Bun.cs:268-287 | src/UniGetUI.PackageEngine.Managers.Pip/Pip.cs:1280-1304 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice.
D4 · Code Duplication · Duplicated block (22 lines × 2) · ×2
  • Duplicated block (22 lines × 2) src/UniGetUI.PackageEngine.Managers.Scoop/Helpers/ScoopTable.cs:15 — src/UniGetUI.PackageEngine.Managers.Scoop/Helpers/ScoopTable.cs:15-36 | src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/ManagerTable.cs:9-30 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
  • Duplicated block (22 lines × 2) src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs:376 — src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs:376-397 | src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs:422-443 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs:376` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs:399` calls `Equals` and `src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs:444` does not — after which the two agree again for 3 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
D4 · Code Duplication · Duplicated block (17–19 lines × 2) · ×2
  • Duplicated block (17–19 lines × 2) src/UniGetUI.Avalonia/Infrastructure/GitHubCloudBackupService.cs:80 — src/UniGetUI.Avalonia/Infrastructure/GitHubCloudBackupService.cs:80-96 | src/UniGetUI.Interface.IpcApi/IpcBackupApi.cs:469-487 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.Avalonia/Infrastructure/GitHubCloudBackupService.cs:80` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (17–19 lines × 2) src/UniGetUI.PackageEngine.Managers.Apt/Helpers/AptPkgDetailsHelper.cs:28 — src/UniGetUI.PackageEngine.Managers.Apt/Helpers/AptPkgDetailsHelper.cs:28-44 | src/UniGetUI.PackageEngine.Managers.Dnf/Helpers/DnfPkgDetailsHelper.cs:31-49 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Apt/Helpers/AptPkgDetailsHelper.cs:28` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
D4 · Code Duplication · Duplicated block (17 lines × 3) · ×2
  • Duplicated block (17 lines × 3) REDACTED:1621 — REDACTED:1621-1637 | REDACTED:1653-1669 | REDACTED:1755-1771 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `REDACTED:1621` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (17 lines × 3) src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs:572 — src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs:572-589 | src/UniGetUI.PackageEngine.Managers.PowerShell/PowerShell.cs:172-188 | src/UniGetUI.PackageEngine.Managers.PowerShell7/PowerShell7.cs:213-229 — `src/UniGetUI.PackageEngine.Managers.PowerShell/PowerShell.cs` and `src/UniGetUI.PackageEngine.Managers.PowerShell7/PowerShell7.cs` are one unit implemented once per sibling directory, so they are most likely parallel implementations of one contract rather than a copy of each other — this scan matched 4 separate duplicated blocks between them, totalling at least 85 lines. If both are selected at run time, neither can be retired in favour of the other, and the lines that DIFFER between them are the reason both exist. The move that pays here is to hoist the identical part into a shared location the whole family can reach and give what differs a parameter or a seam, so a change lands once instead of once per sibling; extracting one helper per block leaves every sibling to drift on its own.
D4 · Code Duplication · Duplicated block (16 lines × 2) · ×2
  • Duplicated block (16 lines × 2) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:628 — src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:628-643 | src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:655-670 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:628` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
  • Duplicated block (16 lines × 2) src/UniGetUI.PackageEngine.Managers.Pacman/Helpers/PacmanPkgDetailsHelper.cs:60 — src/UniGetUI.PackageEngine.Managers.Pacman/Helpers/PacmanPkgDetailsHelper.cs:60-75 | src/UniGetUI.PackageEngine.Managers.Pacman/Helpers/PacmanPkgDetailsHelper.cs:100-115 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Pacman/Helpers/PacmanPkgDetailsHelper.cs:60` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
D4 · Code Duplication · Duplicated block (12 lines × 2) · ×2
  • Duplicated block (12 lines × 2) src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs:168 — src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs:168-179 | src/UniGetUI.PackageEngine.Managers.Pip/Pip.cs:113-124 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
  • Duplicated block (12 lines × 2) src/UniGetUI.PackageEngine.Managers.PowerShell/PowerShell.cs:203 — src/UniGetUI.PackageEngine.Managers.PowerShell/PowerShell.cs:203-214 | src/UniGetUI.PackageEngine.Managers.PowerShell7/PowerShell7.cs:154-165 — `src/UniGetUI.PackageEngine.Managers.PowerShell/PowerShell.cs` and `src/UniGetUI.PackageEngine.Managers.PowerShell7/PowerShell7.cs` are one unit implemented once per sibling directory, so they are most likely parallel implementations of one contract rather than a copy of each other — this scan matched 4 separate duplicated blocks between them, totalling at least 85 lines. If both are selected at run time, neither can be retired in favour of the other, and the lines that DIFFER between them are the reason both exist. The move that pays here is to hoist the identical part into a shared location the whole family can reach and give what differs a parameter or a seam, so a change lands once instead of once per sibling; extracting one helper per block leaves every sibling to drift on its own. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.PowerShell/PowerShell.cs:203` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it. Note first that the copies are not typed on the same thing: the declarations holding them bind `manager` to `PowerShell` in one and `PowerShell7` in another, and the duplicated lines use it. The extracted unit therefore needs a parameter type that fits BOTH — their common supertype where they have one, or a new abstraction over them where they do not — and settling that is the step that comes BEFORE the extraction above. Where the two types are deliberately unrelated, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.
D4 · Code Duplication · Duplicated block (9–11 lines × 2) · ×2
  • Duplicated block (9–11 lines × 2) src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs:1424 — src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs:1424-1434 | src/UniGetUI.Tui/Views/Pages/PackageListPage.cs:941-949 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
  • Duplicated block (9–11 lines × 2) src/UniGetUI.Avalonia/Views/Controls/Settings/CheckboxCard.cs:161 — src/UniGetUI.Avalonia/Views/Controls/Settings/CheckboxCard.cs:161-169 | src/UniGetUI.Avalonia/Views/Controls/Settings/CheckboxCard.cs:233-243 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.Avalonia/Views/Controls/Settings/CheckboxCard.cs:233` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
D4 · Code Duplication · Duplicated block (6 lines × 3) · ×2
  • Duplicated block (6 lines × 3) src/UniGetUI.Avalonia/Views/SoftwarePages/DiscoverSoftwarePage.cs:287 — src/UniGetUI.Avalonia/Views/SoftwarePages/DiscoverSoftwarePage.cs:287-292 | src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:178-183 | src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:281-286 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from all 3 call sites, so a change lands once. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:278` calls `Add` and `src/UniGetUI.Avalonia/Views/SoftwarePages/DiscoverSoftwarePage.cs:284` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
  • Duplicated block (6 lines × 3) src/UniGetUI.Avalonia/ViewModels/Pages/LogPages/UniGetUILogPageViewModel.cs:73 — src/UniGetUI.Avalonia/ViewModels/Pages/LogPages/UniGetUILogPageViewModel.cs:73-81 | src/UniGetUI.Interface.IpcApi/IpcLogsApi.cs:177-184 | src/UniGetUI.Tui/Views/Pages/LogsPage.cs:267-272 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere all 3 call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made 3 times. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
D4 · Code Duplication · Duplicated block (7 lines × 3) · ×2
  • Duplicated block (7 lines × 3) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/InstallOptionsPanelViewModel.cs:291 — src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/InstallOptionsPanelViewModel.cs:291-297 | src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/OperationsViewModel.cs:41-53 | src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PackageManagerViewModel.cs:295-301 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from all 3 call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/InstallOptionsPanelViewModel.cs:291` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
  • Duplicated block (7 lines × 3) src/UniGetUI.AgentSkills.Cli/AddRun.cs:425 — src/UniGetUI.AgentSkills.Cli/AddRun.cs:425-431 | src/UniGetUI.AgentSkills.Cli/Remove.cs:60-66 | src/UniGetUI.AgentSkills.Cli/Sync.cs:196-202 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from all 3 call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.AgentSkills.Cli/AddRun.cs:425` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D4 · Code Duplication · Duplicated block (6–7 lines × 2) · ×2
  • Duplicated block (6–7 lines × 2) src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:449 — src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:449-454 | src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:471-477 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
  • Duplicated block (6–7 lines × 2) src/UniGetUI.Avalonia/Infrastructure/AvaloniaPackageOperationHelper.cs:162 — src/UniGetUI.Avalonia/Infrastructure/AvaloniaPackageOperationHelper.cs:162-167 | src/UniGetUI.Avalonia/Infrastructure/AvaloniaPackageOperationHelper.cs:218-224 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.Avalonia/Infrastructure/AvaloniaPackageOperationHelper.cs:162` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D4 · Code Duplication · Duplicated block (8 lines × 3) · ×2
  • Duplicated block (8 lines × 3) src/UniGetUI.PackageEngine.AgentBroker/BrokerPolicyDocumentValidator.cs:44 — src/UniGetUI.PackageEngine.AgentBroker/BrokerPolicyDocumentValidator.cs:44-51 | src/UniGetUI.PackageEngine.AgentBroker/BrokerPolicyInspector.cs:129-136 | src/UniGetUI.PackageEngine.AgentBroker/PolicyManagement/BrokerPolicyManagementService.cs:161-168 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere all 3 call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made 3 times. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
  • Duplicated block (8 lines × 3) src/UniGetUI.PackageEngine.Managers.Bun/Bun.cs:258 — src/UniGetUI.PackageEngine.Managers.Bun/Bun.cs:258-265 | src/UniGetUI.PackageEngine.Managers.Cargo/Cargo.cs:202-209 | src/UniGetUI.PackageEngine.Managers.Npm/Npm.cs:460-467 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere all 3 call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made 3 times. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
IC1 · Incompleteness & stubs · Skeleton type · ×2
  • Skeleton type — most members are unfinished src/UniGetUI.PackageEngine.Managers.Vcpkg/Helpers/VcpkgPkgDetailsHelper.cs:13 — `VcpkgPkgDetailsHelper` has 3 unfinished members out of 5 declared members (methods, properties, indexers and events, whether or not each carries a body) — a scaffolded type that was never implemented.
  • Skeleton type — most members are unfinished src/UniGetUI.PackageEngine.Managers.Vcpkg/Helpers/VcpkgSourceHelper.cs:8 — `VcpkgSourceHelper` has 4 unfinished members out of 5 declared members (methods, properties, indexers and events, whether or not each carries a body) — a scaffolded type that was never implemented.
IC1 · Incompleteness & stubs · Hollow method · ×2
  • Hollow method — returns a constant without doing the work src/UniGetUI.PackageEngine.Operations/PackageOperations.cs:1451 — `IsWinGetManager` looks like it should compute a result but its body just returns a constant — a placeholder return that was never filled in.
  • Hollow method — returns a constant without doing the work src/UniGetUI.PackageEngine.Operations/SourceOperations.cs:154 — `IsWinGetManager` looks like it should compute a result but its body just returns a constant — a placeholder return that was never filled in.
X5 · Nullable reference types · Symbol treated as nullable, then dereferenced unguarded · ×2
  • Symbol treated as nullable, then dereferenced unguarded src/UniGetUI.Extensions.AgentSkills/AgentSkillsService.cs:284 — This method contradicts itself about `skill`: line 288 writes `skill?.Description`, which says `skill` can be null, but line 284 then dereferences it directly as `skill.Name` with no null test between them and no guard around it. If the `?.` is right, that dereference throws NullReferenceException on the input it was written for; if `skill` truly cannot be null here, the `?.` is misleading. Settle it one way — test `skill` once before the first use and handle the null case, or drop the `?.` — rather than leaving the two readings side by side.
  • Symbol treated as nullable, then dereferenced unguarded src/UniGetUI.PackageEngine.Managers.Pip/Helpers/PipPkgDetailsHelper.cs:38 — This method contradicts itself about `info`: line 81 writes `info?.`, which says `info` can be null, but line 38 then dereferences it directly with no null test between them and no guard around it. If the `?.` is right, that dereference throws NullReferenceException on the input it was written for; if `info` truly cannot be null here, the `?.` is misleading. Settle it one way — test `info` once before the first use and handle the null case, or drop the `?.` — rather than leaving the two readings side by side.
C1 · Data Protection · No data-protection/encryption · ×1
  • No data-protection/encryption — No data-protection or encryption usage (ASP.NET Data Protection, AES, column encryption, PBKDF2) was found — sensitive data at rest may be unprotected. If TDE/KMS/vault is delegated to infrastructure, ignore.
D1 · Cyclomatic Complexity · AddCommand.RunInner (cyclomatic 122) · ×1
  • AddCommand.RunInner (cyclomatic 122) src/UniGetUI.AgentSkills.Cli/AddRun.cs:192 — AddCommand.RunInner has cyclomatic complexity 122 (threshold 15). Of this number, 113 points are the body's own statements and 9 belong to 5 function literals inside it that branch. To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · SearchMultiselect.Run (cyclomatic 100) · ×1
  • SearchMultiselect.Run (cyclomatic 100) src/UniGetUI.AgentSkills.Cli/SearchMultiselect.cs:136 — SearchMultiselect.Run has cyclomatic complexity 100 (threshold 15). Of this number, 97 points are the body's own statements and 3 belong to 2 function literals inside it that branch. To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · PolicyEditorSessionViewModel.SaveCoreAsync (cyclomatic 53) · ×1
  • PolicyEditorSessionViewModel.SaveCoreAsync (cyclomatic 53) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:509 — PolicyEditorSessionViewModel.SaveCoreAsync has cyclomatic complexity 53 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · MainWindow.OnWindowsWndProc (cyclomatic 49) · ×1
  • MainWindow.OnWindowsWndProc (cyclomatic 49) src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:1512 — MainWindow.OnWindowsWndProc has cyclomatic complexity 49 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · CargoBinaryResolver.ResolveAsync (cyclomatic 48) · ×1
  • CargoBinaryResolver.ResolveAsync (cyclomatic 48) src/UniGetUI.PackageEngine.Managers.Cargo/CargoBinaryResolver.cs:36 — CargoBinaryResolver.ResolveAsync has cyclomatic complexity 48 (threshold 15). Of this number, 44 points are the body's own statements and 4 belong to one function literal inside it that branches. To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · UpdateCommand.UpdateGlobalSkills (cyclomatic 47) · ×1
  • UpdateCommand.UpdateGlobalSkills (cyclomatic 47) src/UniGetUI.AgentSkills.Cli/Update.cs:302 — UpdateCommand.UpdateGlobalSkills has cyclomatic complexity 47 (threshold 15). Of this number, 45 points are the body's own statements and 2 belong to 2 function literals inside it that branch. To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · SyncCommand.Run (cyclomatic 42) · ×1
  • SyncCommand.Run (cyclomatic 42) src/UniGetUI.AgentSkills.Cli/Sync.cs:112 — SyncCommand.Run has cyclomatic complexity 42 (threshold 15). Of this number, 41 points are the body's own statements and 1 belongs to one function literal inside it that branches. To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · AbstractPackagesPage.AbstractPackagesPage.ctor (cyclomatic 40) · ×1
  • AbstractPackagesPage.AbstractPackagesPage.ctor (cyclomatic 40) src/UniGetUI.Avalonia/Views/SoftwarePages/AbstractPackagesPage.axaml.cs:48 — AbstractPackagesPage.AbstractPackagesPage.ctor has cyclomatic complexity 40 (threshold 15). Most of this is not in the body itself: 13 of the 40 points are its own statements and the rest belongs to 9 function literals inside it that branch (lines 80, 197, 133, …). The decisions are inside those literals, which nothing outside this body can call, review or test on its own, so splitting the enclosing body is not the move available here. To reduce it, lift the literals' work into a named function or method at the enclosing scope and have each literal call it, then reduce whichever part then reads as the largest.
D1 · Cyclomatic Complexity · AddCommand.HandleWellKnownSkills (cyclomatic 40) · ×1
  • AddCommand.HandleWellKnownSkills (cyclomatic 40) src/UniGetUI.AgentSkills.Cli/AddWellKnown.cs:10 — AddCommand.HandleWellKnownSkills has cyclomatic complexity 40 (threshold 15). Of this number, 38 points are the body's own statements and 2 belong to 2 function literals inside it that branch. To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · InstallOptionsDialog.Build (cyclomatic 40) · ×1
  • InstallOptionsDialog.Build (cyclomatic 40) src/UniGetUI.Tui/Views/Dialogs/InstallOptionsDialog.cs:130 — InstallOptionsDialog.Build has cyclomatic complexity 40 (threshold 15). Most of this is not in the body itself: 12 of the 40 points are its own statements and the rest belongs to 18 function literals inside it that branch (lines 233, 175, 217, …). The decisions are inside those literals, which nothing outside this body can call, review or test on its own, so splitting the enclosing body is not the move available here. To reduce it, lift the literals' work into a named function or method at the enclosing scope and have each literal call it, then reduce whichever part then reads as the largest.
D1 · Cyclomatic Complexity · WinGetPkgOperationHelper._getOperationResult (cyclomatic 38) · ×1
  • WinGetPkgOperationHelper._getOperationResult (cyclomatic 38) src/UniGetUI.PackageEngine.Managers.WinGet/Helpers/WinGetPkgOperationHelper.cs:431 — WinGetPkgOperationHelper._getOperationResult has cyclomatic complexity 38 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · WinGetPkgOperationHelper._getOperationParameters (cyclomatic 37) · ×1
  • WinGetPkgOperationHelper._getOperationParameters (cyclomatic 37) src/UniGetUI.PackageEngine.Managers.WinGet/Helpers/WinGetPkgOperationHelper.cs:128 — WinGetPkgOperationHelper._getOperationParameters has cyclomatic complexity 37 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · UpdateCommand.UpdateProjectSkills (cyclomatic 35) · ×1
  • UpdateCommand.UpdateProjectSkills (cyclomatic 35) src/UniGetUI.AgentSkills.Cli/Update.cs:529 — UpdateCommand.UpdateProjectSkills has cyclomatic complexity 35 (threshold 15). Of this number, 34 points are the body's own statements and 1 belongs to one function literal inside it that branches. To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · CargoInstallTracker.InstallAsync (cyclomatic 35) · ×1
  • CargoInstallTracker.InstallAsync (cyclomatic 35) src/UniGetUI.PackageEngine.Managers.Cargo/CargoInstallTracker.cs:85 — CargoInstallTracker.InstallAsync has cyclomatic complexity 35 (threshold 15). Of this number, 31 points are the body's own statements and 4 belong to 2 function literals inside it that branch. To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · AbstractOperation.MainThreadCore (cyclomatic 34) · ×1
  • AbstractOperation.MainThreadCore (cyclomatic 34) src/UniGetUI.PackageEngine.Operations/AbstractOperation.cs:309 — AbstractOperation.MainThreadCore has cyclomatic complexity 34 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · Bun.ParseBunOutdatedTable (cyclomatic 34) · ×1
  • Bun.ParseBunOutdatedTable (cyclomatic 34) src/UniGetUI.PackageEngine.Managers.Bun/Bun.cs:393 — Bun.ParseBunOutdatedTable has cyclomatic complexity 34 (threshold 15). Most of this is not in the body itself: 14 of the 34 points are its own statements and the rest belongs to 2 function literals inside it that branch (lines 423, 424). The decisions are inside those literals, which nothing outside this body can call, review or test on its own, so splitting the enclosing body is not the move available here. To reduce it, lift the literals' work into a named function or method at the enclosing scope and have each literal call it, then reduce whichever part then reads as the largest.
D1 · Cyclomatic Complexity · PowerShellPkgOperationHelper._getOperationParameters (cyclomatic 34) · ×1
  • PowerShellPkgOperationHelper._getOperationParameters (cyclomatic 34) src/UniGetUI.PackageEngine.Managers.PowerShell/Helpers/PowerShellPkgOperationHelper.cs:21 — PowerShellPkgOperationHelper._getOperationParameters has cyclomatic complexity 34 (threshold 15). Of this number, 33 points are the body's own statements and 1 belongs to one function literal inside it that branches. To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · MainWindow.Window_KeyDown (cyclomatic 32) · ×1
  • MainWindow.Window_KeyDown (cyclomatic 32) src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:408 — MainWindow.Window_KeyDown has cyclomatic complexity 32 (threshold 15). To reduce it, name the conditions: bind each compound test to a well-named local or a small predicate function, so the body reads as a sequence of named decisions rather than a chain of operators.
D1 · Cyclomatic Complexity · AvaloniaAutoUpdater.PrepareAndLaunchAsync (cyclomatic 32) · ×1
  • AvaloniaAutoUpdater.PrepareAndLaunchAsync (cyclomatic 32) src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:802 — AvaloniaAutoUpdater.PrepareAndLaunchAsync has cyclomatic complexity 32 (threshold 15). Of this number, 30 points are the body's own statements and 2 belong to one function literal inside it that branches. To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · ValidateCommand.StripInstallMetadata (cyclomatic 32) · ×1
  • ValidateCommand.StripInstallMetadata (cyclomatic 32) src/UniGetUI.AgentSkills.Cli/Validate.cs:423 — ValidateCommand.StripInstallMetadata has cyclomatic complexity 32 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · AbstractOperation._runOperation (cyclomatic 31) · ×1
  • AbstractOperation._runOperation (cyclomatic 31) src/UniGetUI.PackageEngine.Operations/AbstractOperation.cs:537 — AbstractOperation._runOperation has cyclomatic complexity 31 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · AvaloniaAutoUpdater.CheckAndInstallUpdatesCoreAsync (cyclomatic 30) · ×1
  • AvaloniaAutoUpdater.CheckAndInstallUpdatesCoreAsync (cyclomatic 30) src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:525 — AvaloniaAutoUpdater.CheckAndInstallUpdatesCoreAsync has cyclomatic complexity 30 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · AbstractProcessOperation.PerformOperation (cyclomatic 29) · ×1
  • AbstractProcessOperation.PerformOperation (cyclomatic 29) src/UniGetUI.PackageEngine.Operations/AbstractProcessOperation.cs:109 — AbstractProcessOperation.PerformOperation has cyclomatic complexity 29 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · DownloadOperation.PerformOperation (cyclomatic 29) · ×1
  • DownloadOperation.PerformOperation (cyclomatic 29) src/UniGetUI.PackageEngine.Operations/DownloadOperation.cs:200 — DownloadOperation.PerformOperation has cyclomatic complexity 29 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · AbstractPackageLoader.ReloadPackages (cyclomatic 29) · ×1
  • AbstractPackageLoader.ReloadPackages (cyclomatic 29) src/UniGetUI.PackageEngine.PackageLoader/AbstractPackageLoader.cs:187 — AbstractPackageLoader.ReloadPackages has cyclomatic complexity 29 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · Program.Run (cyclomatic 28) · ×1
  • Program.Run (cyclomatic 28) src/UniGetUI.AgentSkills.Cli/Main.cs:254 — Program.Run has cyclomatic complexity 28 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · CargoArchive.Read (cyclomatic 28) · ×1
  • CargoArchive.Read (cyclomatic 28) src/UniGetUI.PackageEngine.Managers.Cargo/CargoArchive.cs:18 — CargoArchive.Read has cyclomatic complexity 28 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · CargoPkgOperationHelper._getOperationParameters (cyclomatic 28) · ×1
  • CargoPkgOperationHelper._getOperationParameters (cyclomatic 28) src/UniGetUI.PackageEngine.Managers.Cargo/Helpers/CargoPkgOperationHelper.cs:18 — CargoPkgOperationHelper._getOperationParameters has cyclomatic complexity 28 (threshold 15). Of this number, 23 points are the body's own statements and 5 belong to one function literal inside it that branches. To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · BrokerRequestValidator.Validate (cyclomatic 27) · ×1
  • BrokerRequestValidator.Validate (cyclomatic 27) src/UniGetUI.PackageEngine.AgentBroker/BrokerRequestValidator.cs:50 — BrokerRequestValidator.Validate has cyclomatic complexity 27 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · CargoManagedInstaller.TryPerformAsync (cyclomatic 27) · ×1
  • CargoManagedInstaller.TryPerformAsync (cyclomatic 27) REDACTED:18 — CargoManagedInstaller.TryPerformAsync has cyclomatic complexity 27 (threshold 15). Of this number, 23 points are the body's own statements and 4 belong to 2 function literals inside it that branch. To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · Notion.PreparePackSource (cyclomatic 26) · ×1
  • Notion.PreparePackSource (cyclomatic 26) src/UniGetUI.AgentSkills.Cli/Notion.cs:233 — Notion.PreparePackSource has cyclomatic complexity 26 (threshold 15). Of this number, 24 points are the body's own statements and 2 belong to 2 function literals inside it that branch. To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · ValidateCommand.CheckSkill (cyclomatic 26) · ×1
  • ValidateCommand.CheckSkill (cyclomatic 26) src/UniGetUI.AgentSkills.Cli/Validate.cs:298 — ValidateCommand.CheckSkill has cyclomatic complexity 26 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · MainWindow.HitTestResizeBorder (cyclomatic 25) · ×1
  • MainWindow.HitTestResizeBorder (cyclomatic 25) src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:1350 — MainWindow.HitTestResizeBorder has cyclomatic complexity 25 (threshold 15). To reduce it, separate the branches: extract each independent case into its own named function, or replace a long branch ladder over a single value with a data-driven lookup or dispatch table.
D1 · Cyclomatic Complexity · CatalogEditorPage.PinVersionAsync (cyclomatic 25) · ×1
  • CatalogEditorPage.PinVersionAsync (cyclomatic 25) src/UniGetUI.Avalonia/Views/SoftwarePages/CatalogEditorPage.cs:299 — CatalogEditorPage.PinVersionAsync has cyclomatic complexity 25 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · WindowsPeerAuthenticator.Authenticate (cyclomatic 25) · ×1
  • WindowsPeerAuthenticator.Authenticate (cyclomatic 25) src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/Interop/WindowsPeerAuthenticator.cs:72 — WindowsPeerAuthenticator.Authenticate has cyclomatic complexity 25 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · RemoveCommand.Run (cyclomatic 25) · ×1
  • RemoveCommand.Run (cyclomatic 25) src/UniGetUI.AgentSkills.Cli/Remove.cs:18 — RemoveCommand.Run has cyclomatic complexity 25 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · Ui.Multiselect (cyclomatic 25) · ×1
  • Ui.Multiselect (cyclomatic 25) src/UniGetUI.AgentSkills.Cli/Ui.cs:683 — Ui.Multiselect has cyclomatic complexity 25 (threshold 15). Most of this is not in the body itself: 8 of the 25 points are its own statements and the rest belongs to 2 function literals inside it that branch (lines 723, 703). The decisions are inside those literals, which nothing outside this body can call, review or test on its own, so splitting the enclosing body is not the move available here. To reduce it, lift the literals' work into a named function or method at the enclosing scope and have each literal call it, then reduce whichever part then reads as the largest. This is NOT this file's highest cyclomatic complexity: Ui.IsWide (cyclomatic 69) is higher and carries no row of its own — it was excluded as a flat dispatcher (a long switch/match over independent cases: many branches, almost no nesting), which this dimension does not treat as a refactor obligation. It is named here so the ranking you see in this file is not mistaken for the whole of it; the excluded method is counted neither in this dimension's figures nor in its score.
D1 · Cyclomatic Complexity · BrokerRequestValidator.FindUnsupportedOptions (cyclomatic 25) · ×1
  • BrokerRequestValidator.FindUnsupportedOptions (cyclomatic 25) src/UniGetUI.PackageEngine.AgentBroker/BrokerRequestValidator.cs:192 — BrokerRequestValidator.FindUnsupportedOptions has cyclomatic complexity 25 (threshold 15). To reduce it, name the conditions: bind each compound test to a well-named local or a small predicate function, so the body reads as a sequence of named decisions rather than a chain of operators.
D1 · Cyclomatic Complexity · PkgPayload.FindAppResources (cyclomatic 25) · ×1
  • PkgPayload.FindAppResources (cyclomatic 25) src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgPayload.cs:46 — PkgPayload.FindAppResources has cyclomatic complexity 25 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · PacmanPkgDetailsHelper.GetDetails_UnSafe (cyclomatic 25) · ×1
  • PacmanPkgDetailsHelper.GetDetails_UnSafe (cyclomatic 25) src/UniGetUI.PackageEngine.Managers.Pacman/Helpers/PacmanPkgDetailsHelper.cs:15 — PacmanPkgDetailsHelper.GetDetails_UnSafe has cyclomatic complexity 25 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · AptPkgDetailsHelper.GetDetails_UnSafe (cyclomatic 24) · ×1
  • AptPkgDetailsHelper.GetDetails_UnSafe (cyclomatic 24) src/UniGetUI.PackageEngine.Managers.Apt/Helpers/AptPkgDetailsHelper.cs:15 — AptPkgDetailsHelper.GetDetails_UnSafe has cyclomatic complexity 24 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · AgentPolicyInspectorViewModel.ApplyManagementSnapshot (cyclomatic 23) · ×1
  • AgentPolicyInspectorViewModel.ApplyManagementSnapshot (cyclomatic 23) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/AgentPolicyInspectorViewModel.cs:684 — AgentPolicyInspectorViewModel.ApplyManagementSnapshot has cyclomatic complexity 23 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top. This is NOT this file's highest cyclomatic complexity: AgentPolicyInspectorViewModel.HelpForRow (cyclomatic 46) is higher and carries no row of its own — it was excluded as a flat dispatcher (a long switch/match over independent cases: many branches, almost no nesting), which this dimension does not treat as a refactor obligation. It is named here so the ranking you see in this file is not mistaken for the whole of it; the excluded method is counted neither in this dimension's figures nor in its score.
D1 · Cyclomatic Complexity · DetectAgent.DetermineAgent (cyclomatic 23) · ×1
  • DetectAgent.DetermineAgent (cyclomatic 23) src/UniGetUI.AgentSkills.Cli/DetectAgent.cs:14 — DetectAgent.DetermineAgent has cyclomatic complexity 23 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · Ui.WrapLine (cyclomatic 23) · ×1
  • Ui.WrapLine (cyclomatic 23) src/UniGetUI.AgentSkills.Cli/Ui.cs:181 — Ui.WrapLine has cyclomatic complexity 23 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top. This is NOT this file's highest cyclomatic complexity: Ui.IsWide (cyclomatic 69) is higher and carries no row of its own — it was excluded as a flat dispatcher (a long switch/match over independent cases: many branches, almost no nesting), which this dimension does not treat as a refactor obligation. It is named here so the ranking you see in this file is not mistaken for the whole of it; the excluded method is counted neither in this dimension's figures nor in its score.
D1 · Cyclomatic Complexity · ScoopPkgDetailsHelper.GetDetails_UnSafe (cyclomatic 23) · ×1
  • ScoopPkgDetailsHelper.GetDetails_UnSafe (cyclomatic 23) src/UniGetUI.PackageEngine.Managers.Scoop/Helpers/ScoopPkgDetailsHelper.cs:35 — ScoopPkgDetailsHelper.GetDetails_UnSafe has cyclomatic complexity 23 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · ScoopPkgOperationHelper._getOperationParameters (cyclomatic 23) · ×1
  • ScoopPkgOperationHelper._getOperationParameters (cyclomatic 23) src/UniGetUI.PackageEngine.Managers.Scoop/Helpers/ScoopPkgOperationHelper.cs:15 — ScoopPkgOperationHelper._getOperationParameters has cyclomatic complexity 23 (threshold 15). To reduce it, separate the branches: extract each independent case into its own named function, or replace a long branch ladder over a single value with a data-driven lookup or dispatch table.
D1 · Cyclomatic Complexity · BaseNuGetDetailsHelper.GetDetails_UnSafe (cyclomatic 23) · ×1
  • BaseNuGetDetailsHelper.GetDetails_UnSafe (cyclomatic 23) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGetDetailsHelper.cs:23 — BaseNuGetDetailsHelper.GetDetails_UnSafe has cyclomatic complexity 23 (threshold 15). To reduce it, separate the branches: extract each independent case into its own named function, or replace a long branch ladder over a single value with a data-driven lookup or dispatch table.
D1 · Cyclomatic Complexity · AgentSkillsViewModel.RefreshLibraryItems (cyclomatic 22) · ×1
  • AgentSkillsViewModel.RefreshLibraryItems (cyclomatic 22) src/UniGetUI.Avalonia/ViewModels/Pages/AgentSkillsViewModel.cs:407 — AgentSkillsViewModel.RefreshLibraryItems has cyclomatic complexity 22 (threshold 15). Most of this is not in the body itself: 7 of the 22 points are its own statements and the rest belongs to 6 function literals inside it that branch (lines 444, 416, 425, …). The decisions are inside those literals, which nothing outside this body can call, review or test on its own, so splitting the enclosing body is not the move available here. To reduce it, lift the literals' work into a named function or method at the enclosing scope and have each literal call it, then reduce whichever part then reads as the largest.
D1 · Cyclomatic Complexity · ListCommand.Run (cyclomatic 22) · ×1
  • ListCommand.Run (cyclomatic 22) src/UniGetUI.AgentSkills.Cli/List.cs:92 — ListCommand.Run has cyclomatic complexity 22 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · UpdaterDownloadEngine.DownloadInstallerPartAsync (cyclomatic 22) · ×1
  • UpdaterDownloadEngine.DownloadInstallerPartAsync (cyclomatic 22) src/UniGetUI.Core.Tools/UpdaterDownloadEngine.cs:102 — UpdaterDownloadEngine.DownloadInstallerPartAsync has cyclomatic complexity 22 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · SkillSourceLocator.Parse (cyclomatic 22) · ×1
  • SkillSourceLocator.Parse (cyclomatic 22) src/UniGetUI.Extensions.AgentSkills/Sources/SkillSourceLocator.cs:80 — SkillSourceLocator.Parse has cyclomatic complexity 22 (threshold 15). Of this number, 20 points are the body's own statements and 2 belong to one function literal inside it that branches. To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · CargoInstallTracker.Recover (cyclomatic 22) · ×1
  • CargoInstallTracker.Recover (cyclomatic 22) src/UniGetUI.PackageEngine.Managers.Cargo/CargoInstallTracker.cs:242 — CargoInstallTracker.Recover has cyclomatic complexity 22 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · ManageShortcutsViewModel.SaveChanges (cyclomatic 21) · ×1
  • ManageShortcutsViewModel.SaveChanges (cyclomatic 21) src/UniGetUI.Avalonia/ViewModels/DialogPages/ManageShortcutsViewModel.cs:275 — ManageShortcutsViewModel.SaveChanges has cyclomatic complexity 21 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · MainWindowViewModel.MainWindowViewModel.ctor (cyclomatic 21) · ×1
  • MainWindowViewModel.MainWindowViewModel.ctor (cyclomatic 21) src/UniGetUI.Avalonia/ViewModels/MainWindowViewModel.cs:506 — MainWindowViewModel.MainWindowViewModel.ctor has cyclomatic complexity 21 (threshold 15). Of this number, 12 points are the body's own statements and 9 belong to 5 function literals inside it that branch. To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · AvaloniaBootstrapper.NavigateApp (cyclomatic 21) · ×1
  • AvaloniaBootstrapper.NavigateApp (cyclomatic 21) src/UniGetUI.Avalonia/Infrastructure/AvaloniaBootstrapper.cs:292 — AvaloniaBootstrapper.NavigateApp has cyclomatic complexity 21 (threshold 15). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Where every arm is uniform — the same kind of value, with no behaviour of its own — a table keyed by the case is the shorter form; wherever the arms carry different data or different behaviour, keep them as cases, because collapsing those trades an explicit, reviewable set of cases for nothing.
D1 · Cyclomatic Complexity · AddCommand.ParseOptions (cyclomatic 21) · ×1
  • AddCommand.ParseOptions (cyclomatic 21) src/UniGetUI.AgentSkills.Cli/AddRun.cs:739 — AddCommand.ParseOptions has cyclomatic complexity 21 (threshold 15). To reduce it, separate the branches: extract each independent case into its own named function, or replace a long branch ladder over a single value with a data-driven lookup or dispatch table.
D1 · Cyclomatic Complexity · WindowsPolicyWriteElevator.ExchangeAsync (cyclomatic 21) · ×1
  • WindowsPolicyWriteElevator.ExchangeAsync (cyclomatic 21) src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/WindowsPolicyWriteElevator.cs:302 — WindowsPolicyWriteElevator.ExchangeAsync has cyclomatic complexity 21 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · PackageOperation._getPostInstallOps (cyclomatic 21) · ×1
  • PackageOperation._getPostInstallOps (cyclomatic 21) src/UniGetUI.PackageEngine.Operations/PackageOperations.cs:1723 — PackageOperation._getPostInstallOps has cyclomatic complexity 21 (threshold 15). Of this number, 14 points are the body's own statements and 7 belong to 2 function items inside it that branch. To reduce it, name the conditions: bind each compound test to a well-named local or a small predicate function, so the body reads as a sequence of named decisions rather than a chain of operators.
D1 · Cyclomatic Complexity · ProcessTaskLogger.AsColoredString (cyclomatic 21) · ×1
  • ProcessTaskLogger.AsColoredString (cyclomatic 21) src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/ManagerLogger.cs:230 — ProcessTaskLogger.AsColoredString has cyclomatic complexity 21 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · CargoInstallTracker.GetBuildArgumentsAsync (cyclomatic 21) · ×1
  • CargoInstallTracker.GetBuildArgumentsAsync (cyclomatic 21) src/UniGetUI.PackageEngine.Managers.Cargo/CargoInstallTracker.cs:19 — CargoInstallTracker.GetBuildArgumentsAsync has cyclomatic complexity 21 (threshold 15). Of this number, 19 points are the body's own statements and 2 belong to one function literal inside it that branches. To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · SnapPkgDetailsHelper.GetDetails_UnSafe (cyclomatic 21) · ×1
  • SnapPkgDetailsHelper.GetDetails_UnSafe (cyclomatic 21) src/UniGetUI.PackageEngine.Managers.Snap/Helpers/SnapPkgDetailsHelper.cs:15 — SnapPkgDetailsHelper.GetDetails_UnSafe has cyclomatic complexity 21 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · BoundedNamedPipeBrokerTransport.ReadResponseAsync (cyclomatic 20) · ×1
  • BoundedNamedPipeBrokerTransport.ReadResponseAsync (cyclomatic 20) src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/Shared/BoundedNamedPipeBrokerTransport.cs:136 — BoundedNamedPipeBrokerTransport.ReadResponseAsync has cyclomatic complexity 20 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · AddCommand.Run (cyclomatic 20) · ×1
  • AddCommand.Run (cyclomatic 20) src/UniGetUI.AgentSkills.Cli/AddRun.cs:107 — AddCommand.Run has cyclomatic complexity 20 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · AgentSkillsService.Search (cyclomatic 20) · ×1
  • AgentSkillsService.Search (cyclomatic 20) src/UniGetUI.Extensions.AgentSkills/AgentSkillsService.cs:186 — AgentSkillsService.Search has cyclomatic complexity 20 (threshold 15). Of this number, 17 points are the body's own statements and 3 belong to one function literal inside it that branches. To reduce it, separate the branches: extract each independent case into its own named function, or replace a long branch ladder over a single value with a data-driven lookup or dispatch table.
D1 · Cyclomatic Complexity · IpcClient.BuildPackageQueryParameters (cyclomatic 20) · ×1
  • IpcClient.BuildPackageQueryParameters (cyclomatic 20) src/UniGetUI.Interface.IpcApi/IpcClient.cs:1435 — IpcClient.BuildPackageQueryParameters has cyclomatic complexity 20 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · IpcClient.GetRequestTimeout (cyclomatic 20) · ×1
  • IpcClient.GetRequestTimeout (cyclomatic 20) src/UniGetUI.Interface.IpcApi/IpcClient.cs:1579 — IpcClient.GetRequestTimeout has cyclomatic complexity 20 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · BrokerRequestValidator.CheckVersion (cyclomatic 20) · ×1
  • BrokerRequestValidator.CheckVersion (cyclomatic 20) src/UniGetUI.PackageEngine.AgentBroker/BrokerRequestValidator.cs:355 — BrokerRequestValidator.CheckVersion has cyclomatic complexity 20 (threshold 15). Of this number, 18 points are the body's own statements and 2 belong to one function literal inside it that branches. To reduce it, separate the branches: extract each independent case into its own named function, or replace a long branch ladder over a single value with a data-driven lookup or dispatch table.
D1 · Cyclomatic Complexity · Scoop.ParseAvailableUpdates (cyclomatic 20) · ×1
  • Scoop.ParseAvailableUpdates (cyclomatic 20) src/UniGetUI.PackageEngine.Managers.Scoop/Scoop.cs:403 — Scoop.ParseAvailableUpdates has cyclomatic complexity 20 (threshold 15). Of this number, 19 points are the body's own statements and 1 belongs to one function literal inside it that branches. To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · FakePackageManagerProcess.RunPackageVerb (cyclomatic 20) · ×1
  • FakePackageManagerProcess.RunPackageVerb (cyclomatic 20) src/UniGetUI.Tui/FakeData/FakePackageManagerProcess.cs:100 — FakePackageManagerProcess.RunPackageVerb has cyclomatic complexity 20 (threshold 15). Of this number, 17 points are the body's own statements and 3 belong to 3 function literals inside it that branch. To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · InstallOptionsViewModel.InstallOptionsViewModel.ctor (cyclomatic 19) · ×1
  • InstallOptionsViewModel.InstallOptionsViewModel.ctor (cyclomatic 19) src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:286 — InstallOptionsViewModel.InstallOptionsViewModel.ctor has cyclomatic complexity 19 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · PkgHelperCommand.InstallAsync (cyclomatic 19) · ×1
  • PkgHelperCommand.InstallAsync (cyclomatic 19) src/UniGetUI.PackageEngine.Managers.MacPkg/PkgHelperCommand.cs:295 — PkgHelperCommand.InstallAsync has cyclomatic complexity 19 (threshold 15). Of this number, 18 points are the body's own statements and 1 belongs to one function literal inside it that branches. To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · PEInterface.CreateManagers (cyclomatic 19) · ×1
  • PEInterface.CreateManagers (cyclomatic 19) src/UniGetUI.PackageEngine.PackageEngine/PEInterface.cs:89 — PEInterface.CreateManagers has cyclomatic complexity 19 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · StartMenuShortcutsDatabase.HandleNewShortcuts (cyclomatic 19) · ×1
  • StartMenuShortcutsDatabase.HandleNewShortcuts (cyclomatic 19) src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs:611 — StartMenuShortcutsDatabase.HandleNewShortcuts has cyclomatic complexity 19 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · PowerShell7PkgOperationHelper._getOperationParameters (cyclomatic 19) · ×1
  • PowerShell7PkgOperationHelper._getOperationParameters (cyclomatic 19) src/UniGetUI.PackageEngine.Managers.PowerShell7/Helpers/PowerShell7PkgOperationHelper.cs:15 — PowerShell7PkgOperationHelper._getOperationParameters has cyclomatic complexity 19 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · InstalledMatcher.FindByName (cyclomatic 19) · ×1
  • InstalledMatcher.FindByName (cyclomatic 19) src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/InstalledMatcher.cs:38 — InstalledMatcher.FindByName has cyclomatic complexity 19 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · TuiCommandLine.Parse (cyclomatic 19) · ×1
  • TuiCommandLine.Parse (cyclomatic 19) src/UniGetUI.Tui/Infrastructure/TuiCommandLine.cs:71 — TuiCommandLine.Parse has cyclomatic complexity 19 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · PackageListPage.BuildActions (cyclomatic 19) · ×1
  • PackageListPage.BuildActions (cyclomatic 19) src/UniGetUI.Tui/Views/Pages/PackageListPage.cs:1119 — PackageListPage.BuildActions has cyclomatic complexity 19 (threshold 15). Of this number, 13 points are the body's own statements and 6 belong to 6 function literals inside it that branch. To reduce it, separate the branches: extract each independent case into its own named function, or replace a long branch ladder over a single value with a data-driven lookup or dispatch table.
D1 · Cyclomatic Complexity · SoftwareCatalog.Parse (cyclomatic 18) · ×1
  • SoftwareCatalog.Parse (cyclomatic 18) src/UniGetUI.Avalonia/Models/SoftwareCatalog.cs:167 — SoftwareCatalog.Parse has cyclomatic complexity 18 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · OperationViewModel.RebuildMenu (cyclomatic 18) · ×1
  • OperationViewModel.RebuildMenu (cyclomatic 18) src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationViewModel.cs:242 — OperationViewModel.RebuildMenu has cyclomatic complexity 18 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · AgentPluginsViewModel.ChangeKnownItemAsync (cyclomatic 18) · ×1
  • AgentPluginsViewModel.ChangeKnownItemAsync (cyclomatic 18) src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs:244 — AgentPluginsViewModel.ChangeKnownItemAsync has cyclomatic complexity 18 (threshold 15). To reduce it, separate the branches: extract each independent case into its own named function, or replace a long branch ladder over a single value with a data-driven lookup or dispatch table.
D1 · Cyclomatic Complexity · AgentPluginsViewModel.BrowseMarketplaceAsync (cyclomatic 18) · ×1
  • AgentPluginsViewModel.BrowseMarketplaceAsync (cyclomatic 18) src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs:504 — AgentPluginsViewModel.BrowseMarketplaceAsync has cyclomatic complexity 18 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · GitRepositoriesViewModel.MeasureRepositoryAsync (cyclomatic 18) · ×1
  • GitRepositoriesViewModel.MeasureRepositoryAsync (cyclomatic 18) src/UniGetUI.Avalonia/ViewModels/Pages/GitRepositoriesViewModel.cs:734 — GitRepositoriesViewModel.MeasureRepositoryAsync has cyclomatic complexity 18 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · PolicyEditorDialogViewModel.OnSessionPropertyChanged (cyclomatic 18) · ×1
  • PolicyEditorDialogViewModel.OnSessionPropertyChanged (cyclomatic 18) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorDialogViewModel.cs:139 — PolicyEditorDialogViewModel.OnSessionPropertyChanged has cyclomatic complexity 18 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · PolicyFindingPresentation.DescribeLocation (cyclomatic 18) · ×1
  • PolicyFindingPresentation.DescribeLocation (cyclomatic 18) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyValidationFinding.cs:211 — PolicyFindingPresentation.DescribeLocation has cyclomatic complexity 18 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top. This is NOT this file's highest cyclomatic complexity: PolicyFindingPresentation.FieldLabel (cyclomatic 51) is higher and carries no row of its own — it was excluded as a flat dispatcher (a long switch/match over independent cases: many branches, almost no nesting), which this dimension does not treat as a refactor obligation. It is named here so the ranking you see in this file is not mistaken for the whole of it; the excluded method is counted neither in this dimension's figures nor in its score.
D1 · Cyclomatic Complexity · SoftwareCatalogViewModel.UpdateStates (cyclomatic 18) · ×1
  • SoftwareCatalogViewModel.UpdateStates (cyclomatic 18) src/UniGetUI.Avalonia/ViewModels/SoftwarePages/SoftwareCatalogViewModel.cs:535 — SoftwareCatalogViewModel.UpdateStates has cyclomatic complexity 18 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · SoftwareUpdatesPage.WhenPackagesLoaded (cyclomatic 18) · ×1
  • SoftwareUpdatesPage.WhenPackagesLoaded (cyclomatic 18) src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:489 — SoftwareUpdatesPage.WhenPackagesLoaded has cyclomatic complexity 18 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · PolicyElevationLaunchArguments.TryParse (cyclomatic 18) · ×1
  • PolicyElevationLaunchArguments.TryParse (cyclomatic 18) src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/Protocol/PolicyElevationArguments.cs:44 — PolicyElevationLaunchArguments.TryParse has cyclomatic complexity 18 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · CoreData.GetNewDataDirectoryOrMoveOld (cyclomatic 18) · ×1
  • CoreData.GetNewDataDirectoryOrMoveOld (cyclomatic 18) src/UniGetUI.Core.Data/CoreData.cs:422 — CoreData.GetNewDataDirectoryOrMoveOld has cyclomatic complexity 18 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · GitRepositoryService.InspectAsync (cyclomatic 18) · ×1
  • GitRepositoryService.InspectAsync (cyclomatic 18) src/UniGetUI.Extensions.GitRepositories/GitRepositoryService.cs:69 — GitRepositoryService.InspectAsync has cyclomatic complexity 18 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · PackageOperation.PerformBrokerOperation (cyclomatic 18) · ×1
  • PackageOperation.PerformBrokerOperation (cyclomatic 18) src/UniGetUI.PackageEngine.Operations/PackageOperations.cs:527 — PackageOperation.PerformBrokerOperation has cyclomatic complexity 18 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · NativeTaskLogger.AsColoredString (cyclomatic 18) · ×1
  • NativeTaskLogger.AsColoredString (cyclomatic 18) src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/ManagerLogger.cs:404 — NativeTaskLogger.AsColoredString has cyclomatic complexity 18 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · Pip.ResolveLatestCompatibleVersion (cyclomatic 18) · ×1
  • Pip.ResolveLatestCompatibleVersion (cyclomatic 18) src/UniGetUI.PackageEngine.Managers.Pip/Pip.cs:663 — Pip.ResolveLatestCompatibleVersion has cyclomatic complexity 18 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · NuGetV3Client.GetRegistrationVersions (cyclomatic 18) · ×1
  • NuGetV3Client.GetRegistrationVersions (cyclomatic 18) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs:352 — NuGetV3Client.GetRegistrationVersions has cyclomatic complexity 18 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · NuGetV3Client.GetRegistrationPageEntry (cyclomatic 18) · ×1
  • NuGetV3Client.GetRegistrationPageEntry (cyclomatic 18) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs:438 — NuGetV3Client.GetRegistrationPageEntry has cyclomatic complexity 18 (threshold 15). To reduce it, name the conditions: bind each compound test to a well-named local or a small predicate function, so the body reads as a sequence of named decisions rather than a chain of operators.
D1 · Cyclomatic Complexity · FakeOperationHelper._getOperationParameters (cyclomatic 18) · ×1
  • FakeOperationHelper._getOperationParameters (cyclomatic 18) src/UniGetUI.Tui/FakeData/FakePackageManager.cs:231 — FakeOperationHelper._getOperationParameters has cyclomatic complexity 18 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · MainWindow.OnWindowKeyDown (cyclomatic 18) · ×1
  • MainWindow.OnWindowKeyDown (cyclomatic 18) src/UniGetUI.Tui/Views/MainWindow.cs:479 — MainWindow.OnWindowKeyDown has cyclomatic complexity 18 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · CrashHandler.ReportFatalException (cyclomatic 17) · ×1
  • CrashHandler.ReportFatalException (cyclomatic 17) src/UniGetUI.Avalonia/CrashHandler.cs:142 — CrashHandler.ReportFatalException has cyclomatic complexity 17 (threshold 15). Of this number, 14 points are the body's own statements and 3 belong to one function item inside it that branches. To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · AgentSkillsViewModel.LoadSkillsAsync (cyclomatic 17) · ×1
  • AgentSkillsViewModel.LoadSkillsAsync (cyclomatic 17) src/UniGetUI.Avalonia/ViewModels/Pages/AgentSkillsViewModel.cs:877 — AgentSkillsViewModel.LoadSkillsAsync has cyclomatic complexity 17 (threshold 15). Most of this is not in the body itself: 4 of the 17 points are its own statements and the rest belongs to 2 function literals inside it that branch (lines 878, 881). The decisions are inside those literals, which nothing outside this body can call, review or test on its own, so splitting the enclosing body is not the move available here. To reduce it, lift the literals' work into a named function or method at the enclosing scope and have each literal call it, then reduce whichever part then reads as the largest.
D1 · Cyclomatic Complexity · AgentSkillsViewModel.CheckForUpdatesInBackgroundAsync (cyclomatic 17) · ×1
  • AgentSkillsViewModel.CheckForUpdatesInBackgroundAsync (cyclomatic 17) src/UniGetUI.Avalonia/ViewModels/Pages/AgentSkillsViewModel.cs:1262 — AgentSkillsViewModel.CheckForUpdatesInBackgroundAsync has cyclomatic complexity 17 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · PackagesPageViewModel.UpdateFilteredState (cyclomatic 17) · ×1
  • PackagesPageViewModel.UpdateFilteredState (cyclomatic 17) src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs:803 — PackagesPageViewModel.UpdateFilteredState has cyclomatic complexity 17 (threshold 15). To reduce it, name the conditions: bind each compound test to a well-named local or a small predicate function, so the body reads as a sequence of named decisions rather than a chain of operators.
D1 · Cyclomatic Complexity · PolicyJsonEditor.TryFindProperty (cyclomatic 17) · ×1
  • PolicyJsonEditor.TryFindProperty (cyclomatic 17) src/UniGetUI.Avalonia/Views/Controls/PolicyJsonEditor.cs:106 — PolicyJsonEditor.TryFindProperty has cyclomatic complexity 17 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · SvgIcon.ParseSvg (cyclomatic 17) · ×1
  • SvgIcon.ParseSvg (cyclomatic 17) src/UniGetUI.Avalonia/Views/Controls/SvgIcon.cs:114 — SvgIcon.ParseSvg has cyclomatic complexity 17 (threshold 15). To reduce it, separate the branches: extract each independent case into its own named function, or replace a long branch ladder over a single value with a data-driven lookup or dispatch table.
D1 · Cyclomatic Complexity · TrayService.UpdateStatus (cyclomatic 17) · ×1
  • TrayService.UpdateStatus (cyclomatic 17) src/UniGetUI.Avalonia/Infrastructure/TrayService.cs:62 — TrayService.UpdateStatus has cyclomatic complexity 17 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · PreviewCommand.ParseOptions (cyclomatic 17) · ×1
  • PreviewCommand.ParseOptions (cyclomatic 17) src/UniGetUI.AgentSkills.Cli/Preview.cs:42 — PreviewCommand.ParseOptions has cyclomatic complexity 17 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · SyncCommand.DiscoverNodeModuleSkills (cyclomatic 17) · ×1
  • SyncCommand.DiscoverNodeModuleSkills (cyclomatic 17) src/UniGetUI.AgentSkills.Cli/Sync.cs:40 — SyncCommand.DiscoverNodeModuleSkills has cyclomatic complexity 17 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · ValidateCommand.ValidatePath (cyclomatic 17) · ×1
  • ValidateCommand.ValidatePath (cyclomatic 17) src/UniGetUI.AgentSkills.Cli/Validate.cs:631 — ValidateCommand.ValidatePath has cyclomatic complexity 17 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · GitRepositoryService.ParseWorktreeList (cyclomatic 17) · ×1
  • GitRepositoryService.ParseWorktreeList (cyclomatic 17) src/UniGetUI.Extensions.GitRepositories/GitRepositoryService.cs:545 — GitRepositoryService.ParseWorktreeList has cyclomatic complexity 17 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · UpgradablePackagesLoader.IsPackageValid (cyclomatic 17) · ×1
  • UpgradablePackagesLoader.IsPackageValid (cyclomatic 17) src/UniGetUI.PackageEngine.PackageLoader/UpgradablePackagesLoader.cs:33 — UpgradablePackagesLoader.IsPackageValid has cyclomatic complexity 17 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · PeReader.Read (cyclomatic 17) · ×1
  • PeReader.Read (cyclomatic 17) src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/PeReader.cs:43 — PeReader.Read has cyclomatic complexity 17 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · BaseNuGet.FindPackages_UnSafe (cyclomatic 17) · ×1
  • BaseNuGet.FindPackages_UnSafe (cyclomatic 17) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs:120 — BaseNuGet.FindPackages_UnSafe has cyclomatic complexity 17 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · MainWindow.RenderMenu (cyclomatic 17) · ×1
  • MainWindow.RenderMenu (cyclomatic 17) src/UniGetUI.Tui/Views/MainWindow.cs:963 — MainWindow.RenderMenu has cyclomatic complexity 17 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · MainWindowViewModel.NavigateToAsync (cyclomatic 16) · ×1
  • MainWindowViewModel.NavigateToAsync (cyclomatic 16) src/UniGetUI.Avalonia/ViewModels/MainWindowViewModel.cs:917 — MainWindowViewModel.NavigateToAsync has cyclomatic complexity 16 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages. This is NOT this file's highest cyclomatic complexity: MainWindowViewModel.GetPageForType (cyclomatic 18) is higher and carries no row of its own — it was excluded as a flat dispatcher (a long switch/match over independent cases: many branches, almost no nesting), which this dimension does not treat as a refactor obligation. It is named here so the ranking you see in this file is not mistaken for the whole of it; the excluded method is counted neither in this dimension's figures nor in its score.
D1 · Cyclomatic Complexity · PolicyEditorSessionViewModel.AnalyzeRawSyntaxAsync (cyclomatic 16) · ×1
  • PolicyEditorSessionViewModel.AnalyzeRawSyntaxAsync (cyclomatic 16) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:1182 — PolicyEditorSessionViewModel.AnalyzeRawSyntaxAsync has cyclomatic complexity 16 (threshold 15). Of this number, 10 points are the body's own statements and 6 belong to one function literal inside it that branches. To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · PackagesPageViewModel.BuildPackageFilter (cyclomatic 16) · ×1
  • PackagesPageViewModel.BuildPackageFilter (cyclomatic 16) src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs:769 — PackagesPageViewModel.BuildPackageFilter has cyclomatic complexity 16 (threshold 15). Of this number, 13 points are the body's own statements and 3 belong to 2 function literals inside it that branch. To reduce it, separate the branches: extract each independent case into its own named function, or replace a long branch ladder over a single value with a data-driven lookup or dispatch table.
D1 · Cyclomatic Complexity · SettingsBasePage.CreatePageForType (cyclomatic 16) · ×1
  • SettingsBasePage.CreatePageForType (cyclomatic 16) src/UniGetUI.Avalonia/Views/Pages/SettingsPages/SettingsBasePage.axaml.cs:129 — SettingsBasePage.CreatePageForType has cyclomatic complexity 16 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · SharedPreUiCommandDispatcher.TryHandle (cyclomatic 16) · ×1
  • SharedPreUiCommandDispatcher.TryHandle (cyclomatic 16) src/Shared/SharedPreUiCommandDispatcher.cs:76 — SharedPreUiCommandDispatcher.TryHandle has cyclomatic complexity 16 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · UseCommand.ParseOptions (cyclomatic 16) · ×1
  • UseCommand.ParseOptions (cyclomatic 16) src/UniGetUI.AgentSkills.Cli/Use.cs:34 — UseCommand.ParseOptions has cyclomatic complexity 16 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · PersistedEnvironment.ComputeChanges (cyclomatic 16) · ×1
  • PersistedEnvironment.ComputeChanges (cyclomatic 16) src/UniGetUI.Core.Tools/PersistedEnvironment.cs:97 — PersistedEnvironment.ComputeChanges has cyclomatic complexity 16 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · PythonVersion.TryParse (cyclomatic 16) · ×1
  • PythonVersion.TryParse (cyclomatic 16) src/UniGetUI.Core.Tools/PythonVersion.cs:74 — PythonVersion.TryParse has cyclomatic complexity 16 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · CoreTools.VersionStringToStruct (cyclomatic 16) · ×1
  • CoreTools.VersionStringToStruct (cyclomatic 16) REDACTED:726 — CoreTools.VersionStringToStruct has cyclomatic complexity 16 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · CodexAppServerConfigWriter.ReadResultAsync (cyclomatic 16) · ×1
  • CodexAppServerConfigWriter.ReadResultAsync (cyclomatic 16) src/UniGetUI.Extensions.AgentSkills/CodexAppServerClient.cs:158 — CodexAppServerConfigWriter.ReadResultAsync has cyclomatic complexity 16 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · CursorPluginService.PerformAsync (cyclomatic 16) · ×1
  • CursorPluginService.PerformAsync (cyclomatic 16) src/UniGetUI.Extensions.AgentSkills/CursorPluginService.cs:135 — CursorPluginService.PerformAsync has cyclomatic complexity 16 (threshold 15). Most of this is not in the body itself: 1 of the 16 points is its own statement and the rest belongs to one function literal inside it that branches (line 135). The decisions are inside the literal, which nothing outside this body can call, review or test on its own, so splitting the enclosing body is not the move available here. To reduce it, lift the literal's work into a named function or method at the enclosing scope and have the literal call it, then reduce whichever part then reads as the largest.
D1 · Cyclomatic Complexity · WindowsConsoleHost.PrepareInteractiveIO (cyclomatic 16) · ×1
  • WindowsConsoleHost.PrepareInteractiveIO (cyclomatic 16) src/UniGetUI.Interface.IpcApi/WindowsConsoleHost.cs:53 — WindowsConsoleHost.PrepareInteractiveIO has cyclomatic complexity 16 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · TrustedPath.WhyWritable (cyclomatic 16) · ×1
  • TrustedPath.WhyWritable (cyclomatic 16) src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/TrustedPath.cs:63 — TrustedPath.WhyWritable has cyclomatic complexity 16 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · UpgradablePackagesLoader.ResolveSkippedMajorUpdateExclusivelyAsync (cyclomatic 16) · ×1
  • UpgradablePackagesLoader.ResolveSkippedMajorUpdateExclusivelyAsync (cyclomatic 16) src/UniGetUI.PackageEngine.PackageLoader/UpgradablePackagesLoader.cs:173 — UpgradablePackagesLoader.ResolveSkippedMajorUpdateExclusivelyAsync has cyclomatic complexity 16 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D1 · Cyclomatic Complexity · ArpEntries.ReadRegistry (cyclomatic 16) · ×1
  • ArpEntries.ReadRegistry (cyclomatic 16) src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/ArpEntries.cs:36 — ArpEntries.ReadRegistry has cyclomatic complexity 16 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · PeReader.ReadResources (cyclomatic 16) · ×1
  • PeReader.ReadResources (cyclomatic 16) src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/PeReader.cs:139 — PeReader.ReadResources has cyclomatic complexity 16 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · BaseNuGet.GetAvailableUpdatesFromSource (cyclomatic 16) · ×1
  • BaseNuGet.GetAvailableUpdatesFromSource (cyclomatic 16) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs:515 — BaseNuGet.GetAvailableUpdatesFromSource has cyclomatic complexity 16 (threshold 15). Of this number, 15 points are the body's own statements and 1 belongs to one function literal inside it that branches. To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · NuGetV3Client.ParseNuspec (cyclomatic 16) · ×1
  • NuGetV3Client.ParseNuspec (cyclomatic 16) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs:829 — NuGetV3Client.ParseNuspec has cyclomatic complexity 16 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D1 · Cyclomatic Complexity · MainWindow.HandleGlobalShortcut (cyclomatic 16) · ×1
  • MainWindow.HandleGlobalShortcut (cyclomatic 16) src/UniGetUI.Tui/Views/MainWindow.cs:566 — MainWindow.HandleGlobalShortcut has cyclomatic complexity 16 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D17 · Explicit Debt · BarePragmaDisable repeated 11 times in 4 files · ×1
  • BarePragmaDisable repeated 11 times in 4 files src/ExternalLibraries.FilePickers/Classes/Helper.cs:46 — The identical BarePragmaDisable (`#pragma warning disable CA1416`) appears 11 times in 4 files — one decision applied repeatedly (e.g. the same rule silenced on every overload of a fluent API), not 11 independent debts. Decide it once — at the type or project level, or by fixing the underlying pattern — rather than occurrence-by-occurrence. (Every occurrence still counts toward the score and metrics.)
D2 · Cognitive Complexity · AddCommand.RunInner (cognitive 212) · ×1
  • AddCommand.RunInner (cognitive 212) src/UniGetUI.AgentSkills.Cli/AddRun.cs:192 — AddCommand.RunInner has cognitive complexity 212 (threshold 15). Of this number, 200 points are the body's own statements and 12 belong to 5 function literals inside it that branch. To reduce it, flatten the nesting: invert conditions into early returns or guard clauses so the happy path stays at one level, and lift the deepest nested block into its own named function.
D2 · Cognitive Complexity · SearchMultiselect.Run (cognitive 157) · ×1
  • SearchMultiselect.Run (cognitive 157) src/UniGetUI.AgentSkills.Cli/SearchMultiselect.cs:136 — SearchMultiselect.Run has cognitive complexity 157 (threshold 15). Of this number, 155 points are the body's own statements and 2 belong to 2 function literals inside it that branch. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · MainWindow.OnWindowsWndProc (cognitive 92) · ×1
  • MainWindow.OnWindowsWndProc (cognitive 92) src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:1512 — MainWindow.OnWindowsWndProc has cognitive complexity 92 (threshold 15). To reduce it, flatten the nesting: invert conditions into early returns or guard clauses so the happy path stays at one level, and lift the deepest nested block into its own named function.
D2 · Cognitive Complexity · UpdateCommand.UpdateGlobalSkills (cognitive 82) · ×1
  • UpdateCommand.UpdateGlobalSkills (cognitive 82) src/UniGetUI.AgentSkills.Cli/Update.cs:302 — UpdateCommand.UpdateGlobalSkills has cognitive complexity 82 (threshold 15). Of this number, 80 points are the body's own statements and 2 belong to 2 function literals inside it that branch. To reduce it, flatten the nesting: invert conditions into early returns or guard clauses so the happy path stays at one level, and lift the deepest nested block into its own named function.
D2 · Cognitive Complexity · SyncCommand.Run (cognitive 81) · ×1
  • SyncCommand.Run (cognitive 81) src/UniGetUI.AgentSkills.Cli/Sync.cs:112 — SyncCommand.Run has cognitive complexity 81 (threshold 15). Of this number, 80 points are the body's own statements and 1 belongs to one function literal inside it that branches. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · CargoBinaryResolver.ResolveAsync (cognitive 74) · ×1
  • CargoBinaryResolver.ResolveAsync (cognitive 74) src/UniGetUI.PackageEngine.Managers.Cargo/CargoBinaryResolver.cs:36 — CargoBinaryResolver.ResolveAsync has cognitive complexity 74 (threshold 15). Of this number, 73 points are the body's own statements and 1 belongs to one function literal inside it that branches. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · UpdateCommand.UpdateProjectSkills (cognitive 64) · ×1
  • UpdateCommand.UpdateProjectSkills (cognitive 64) src/UniGetUI.AgentSkills.Cli/Update.cs:529 — UpdateCommand.UpdateProjectSkills has cognitive complexity 64 (threshold 15). Of this number, 63 points are the body's own statements and 1 belongs to one function literal inside it that branches. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PolicyEditorSessionViewModel.SaveCoreAsync (cognitive 59) · ×1
  • PolicyEditorSessionViewModel.SaveCoreAsync (cognitive 59) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:509 — PolicyEditorSessionViewModel.SaveCoreAsync has cognitive complexity 59 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · AddCommand.HandleWellKnownSkills (cognitive 58) · ×1
  • AddCommand.HandleWellKnownSkills (cognitive 58) src/UniGetUI.AgentSkills.Cli/AddWellKnown.cs:10 — AddCommand.HandleWellKnownSkills has cognitive complexity 58 (threshold 15). Of this number, 55 points are the body's own statements and 3 belong to 2 function literals inside it that branch. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · AvaloniaAutoUpdater.PrepareAndLaunchAsync (cognitive 55) · ×1
  • AvaloniaAutoUpdater.PrepareAndLaunchAsync (cognitive 55) src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:802 — AvaloniaAutoUpdater.PrepareAndLaunchAsync has cognitive complexity 55 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · AbstractPackageLoader.ReloadPackages (cognitive 53) · ×1
  • AbstractPackageLoader.ReloadPackages (cognitive 53) src/UniGetUI.PackageEngine.PackageLoader/AbstractPackageLoader.cs:187 — AbstractPackageLoader.ReloadPackages has cognitive complexity 53 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · AbstractOperation._runOperation (cognitive 50) · ×1
  • AbstractOperation._runOperation (cognitive 50) src/UniGetUI.PackageEngine.Operations/AbstractOperation.cs:537 — AbstractOperation._runOperation has cognitive complexity 50 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PacmanPkgDetailsHelper.GetDetails_UnSafe (cognitive 50) · ×1
  • PacmanPkgDetailsHelper.GetDetails_UnSafe (cognitive 50) src/UniGetUI.PackageEngine.Managers.Pacman/Helpers/PacmanPkgDetailsHelper.cs:15 — PacmanPkgDetailsHelper.GetDetails_UnSafe has cognitive complexity 50 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · AbstractOperation.MainThreadCore (cognitive 49) · ×1
  • AbstractOperation.MainThreadCore (cognitive 49) src/UniGetUI.PackageEngine.Operations/AbstractOperation.cs:309 — AbstractOperation.MainThreadCore has cognitive complexity 49 (threshold 15). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.
D2 · Cognitive Complexity · ValidateCommand.StripInstallMetadata (cognitive 47) · ×1
  • ValidateCommand.StripInstallMetadata (cognitive 47) src/UniGetUI.AgentSkills.Cli/Validate.cs:423 — ValidateCommand.StripInstallMetadata has cognitive complexity 47 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · InstallOptionsDialog.Build (cognitive 46) · ×1
  • InstallOptionsDialog.Build (cognitive 46) src/UniGetUI.Tui/Views/Dialogs/InstallOptionsDialog.cs:130 — InstallOptionsDialog.Build has cognitive complexity 46 (threshold 15). Of this number, 19 points are the body's own statements and 27 belong to 18 function literals inside it that branch. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · CargoInstallTracker.InstallAsync (cognitive 43) · ×1
  • CargoInstallTracker.InstallAsync (cognitive 43) src/UniGetUI.PackageEngine.Managers.Cargo/CargoInstallTracker.cs:85 — CargoInstallTracker.InstallAsync has cognitive complexity 43 (threshold 15). Of this number, 39 points are the body's own statements and 4 belong to 2 function literals inside it that branch. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PowerShellPkgOperationHelper._getOperationParameters (cognitive 42) · ×1
  • PowerShellPkgOperationHelper._getOperationParameters (cognitive 42) src/UniGetUI.PackageEngine.Managers.PowerShell/Helpers/PowerShellPkgOperationHelper.cs:21 — PowerShellPkgOperationHelper._getOperationParameters has cognitive complexity 42 (threshold 15). Of this number, 41 points are the body's own statements and 1 belongs to one function literal inside it that branches. To reduce it, flatten the nesting: invert conditions into early returns or guard clauses so the happy path stays at one level, and lift the deepest nested block into its own named function.
D2 · Cognitive Complexity · Notion.PreparePackSource (cognitive 41) · ×1
  • Notion.PreparePackSource (cognitive 41) src/UniGetUI.AgentSkills.Cli/Notion.cs:233 — Notion.PreparePackSource has cognitive complexity 41 (threshold 15). Of this number, 38 points are the body's own statements and 3 belong to 2 function literals inside it that branch. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · Ui.WrapLine (cognitive 41) · ×1
  • Ui.WrapLine (cognitive 41) src/UniGetUI.AgentSkills.Cli/Ui.cs:181 — Ui.WrapLine has cognitive complexity 41 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · CargoInstallTracker.Recover (cognitive 41) · ×1
  • CargoInstallTracker.Recover (cognitive 41) src/UniGetUI.PackageEngine.Managers.Cargo/CargoInstallTracker.cs:242 — CargoInstallTracker.Recover has cognitive complexity 41 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · WinGetPkgOperationHelper._getOperationResult (cognitive 41) · ×1
  • WinGetPkgOperationHelper._getOperationResult (cognitive 41) src/UniGetUI.PackageEngine.Managers.WinGet/Helpers/WinGetPkgOperationHelper.cs:431 — WinGetPkgOperationHelper._getOperationResult has cognitive complexity 41 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · ListCommand.Run (cognitive 39) · ×1
  • ListCommand.Run (cognitive 39) src/UniGetUI.AgentSkills.Cli/List.cs:92 — ListCommand.Run has cognitive complexity 39 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · AbstractProcessOperation.PerformOperation (cognitive 39) · ×1
  • AbstractProcessOperation.PerformOperation (cognitive 39) src/UniGetUI.PackageEngine.Operations/AbstractProcessOperation.cs:109 — AbstractProcessOperation.PerformOperation has cognitive complexity 39 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · TuiCommandLine.Parse (cognitive 39) · ×1
  • TuiCommandLine.Parse (cognitive 39) src/UniGetUI.Tui/Infrastructure/TuiCommandLine.cs:71 — TuiCommandLine.Parse has cognitive complexity 39 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · WinGetPkgOperationHelper._getOperationParameters (cognitive 38) · ×1
  • WinGetPkgOperationHelper._getOperationParameters (cognitive 38) src/UniGetUI.PackageEngine.Managers.WinGet/Helpers/WinGetPkgOperationHelper.cs:128 — WinGetPkgOperationHelper._getOperationParameters has cognitive complexity 38 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · AptPkgDetailsHelper.GetDetails_UnSafe (cognitive 37) · ×1
  • AptPkgDetailsHelper.GetDetails_UnSafe (cognitive 37) src/UniGetUI.PackageEngine.Managers.Apt/Helpers/AptPkgDetailsHelper.cs:15 — AptPkgDetailsHelper.GetDetails_UnSafe has cognitive complexity 37 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · BoundedNamedPipeBrokerTransport.ReadResponseAsync (cognitive 36) · ×1
  • BoundedNamedPipeBrokerTransport.ReadResponseAsync (cognitive 36) src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/Shared/BoundedNamedPipeBrokerTransport.cs:136 — BoundedNamedPipeBrokerTransport.ReadResponseAsync has cognitive complexity 36 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · CargoArchive.Read (cognitive 36) · ×1
  • CargoArchive.Read (cognitive 36) src/UniGetUI.PackageEngine.Managers.Cargo/CargoArchive.cs:18 — CargoArchive.Read has cognitive complexity 36 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · AgentSkillsViewModel.EmptyDescription.get (cognitive 35) · ×1
  • AgentSkillsViewModel.EmptyDescription.get (cognitive 35) src/UniGetUI.Avalonia/ViewModels/Pages/AgentSkillsViewModel.cs:226 — AgentSkillsViewModel.EmptyDescription.get has cognitive complexity 35 (threshold 15). To reduce it, flatten the nesting: invert conditions into early returns or guard clauses so the happy path stays at one level, and lift the deepest nested block into its own named function.
D2 · Cognitive Complexity · PolicyJsonEditor.TryFindProperty (cognitive 35) · ×1
  • PolicyJsonEditor.TryFindProperty (cognitive 35) src/UniGetUI.Avalonia/Views/Controls/PolicyJsonEditor.cs:106 — PolicyJsonEditor.TryFindProperty has cognitive complexity 35 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · SyncCommand.DiscoverNodeModuleSkills (cognitive 35) · ×1
  • SyncCommand.DiscoverNodeModuleSkills (cognitive 35) src/UniGetUI.AgentSkills.Cli/Sync.cs:40 — SyncCommand.DiscoverNodeModuleSkills has cognitive complexity 35 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · ValidateCommand.CheckSkill (cognitive 35) · ×1
  • ValidateCommand.CheckSkill (cognitive 35) src/UniGetUI.AgentSkills.Cli/Validate.cs:298 — ValidateCommand.CheckSkill has cognitive complexity 35 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · DownloadOperation.PerformOperation (cognitive 35) · ×1
  • DownloadOperation.PerformOperation (cognitive 35) src/UniGetUI.PackageEngine.Operations/DownloadOperation.cs:200 — DownloadOperation.PerformOperation has cognitive complexity 35 (threshold 15). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.
D2 · Cognitive Complexity · ScoopPkgDetailsHelper.GetDetails_UnSafe (cognitive 35) · ×1
  • ScoopPkgDetailsHelper.GetDetails_UnSafe (cognitive 35) src/UniGetUI.PackageEngine.Managers.Scoop/Helpers/ScoopPkgDetailsHelper.cs:35 — ScoopPkgDetailsHelper.GetDetails_UnSafe has cognitive complexity 35 (threshold 15). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.
D2 · Cognitive Complexity · BaseNuGet.FindPackages_UnSafe (cognitive 35) · ×1
  • BaseNuGet.FindPackages_UnSafe (cognitive 35) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs:120 — BaseNuGet.FindPackages_UnSafe has cognitive complexity 35 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · ManageShortcutsViewModel.SaveChanges (cognitive 34) · ×1
  • ManageShortcutsViewModel.SaveChanges (cognitive 34) src/UniGetUI.Avalonia/ViewModels/DialogPages/ManageShortcutsViewModel.cs:275 — ManageShortcutsViewModel.SaveChanges has cognitive complexity 34 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · AbstractPackagesPage.AbstractPackagesPage.ctor (cognitive 34) · ×1
  • AbstractPackagesPage.AbstractPackagesPage.ctor (cognitive 34) src/UniGetUI.Avalonia/Views/SoftwarePages/AbstractPackagesPage.axaml.cs:48 — AbstractPackagesPage.AbstractPackagesPage.ctor has cognitive complexity 34 (threshold 15). Most of this is not in the body itself: 7 of the 34 points are its own statements and the rest belongs to 9 function literals inside it that branch (lines 80, 197, 133, …). The decisions are inside those literals, which nothing outside this body can call, review or test on its own, so splitting the enclosing body is not the move available here. To reduce it, lift the literals' work into a named function or method at the enclosing scope and have each literal call it, then reduce whichever part then reads as the largest.
D2 · Cognitive Complexity · AvaloniaAutoUpdater.CheckAndInstallUpdatesCoreAsync (cognitive 34) · ×1
  • AvaloniaAutoUpdater.CheckAndInstallUpdatesCoreAsync (cognitive 34) src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:525 — AvaloniaAutoUpdater.CheckAndInstallUpdatesCoreAsync has cognitive complexity 34 (threshold 15). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.
D2 · Cognitive Complexity · SnapPkgDetailsHelper.GetDetails_UnSafe (cognitive 34) · ×1
  • SnapPkgDetailsHelper.GetDetails_UnSafe (cognitive 34) src/UniGetUI.PackageEngine.Managers.Snap/Helpers/SnapPkgDetailsHelper.cs:15 — SnapPkgDetailsHelper.GetDetails_UnSafe has cognitive complexity 34 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PreviewCommand.ParseOptions (cognitive 33) · ×1
  • PreviewCommand.ParseOptions (cognitive 33) src/UniGetUI.AgentSkills.Cli/Preview.cs:42 — PreviewCommand.ParseOptions has cognitive complexity 33 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · RemoveCommand.Run (cognitive 32) · ×1
  • RemoveCommand.Run (cognitive 32) src/UniGetUI.AgentSkills.Cli/Remove.cs:18 — RemoveCommand.Run has cognitive complexity 32 (threshold 15). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.
D2 · Cognitive Complexity · PkgPayload.FindAppResources (cognitive 32) · ×1
  • PkgPayload.FindAppResources (cognitive 32) src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgPayload.cs:46 — PkgPayload.FindAppResources has cognitive complexity 32 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · SoftwareCatalogViewModel.UpdateStates (cognitive 31) · ×1
  • SoftwareCatalogViewModel.UpdateStates (cognitive 31) src/UniGetUI.Avalonia/ViewModels/SoftwarePages/SoftwareCatalogViewModel.cs:535 — SoftwareCatalogViewModel.UpdateStates has cognitive complexity 31 (threshold 15). To reduce it, flatten the nesting: invert conditions into early returns or guard clauses so the happy path stays at one level, and lift the deepest nested block into its own named function.
D2 · Cognitive Complexity · CoreData.GetNewDataDirectoryOrMoveOld (cognitive 31) · ×1
  • CoreData.GetNewDataDirectoryOrMoveOld (cognitive 31) src/UniGetUI.Core.Data/CoreData.cs:422 — CoreData.GetNewDataDirectoryOrMoveOld has cognitive complexity 31 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PersistedEnvironment.ComputeChanges (cognitive 31) · ×1
  • PersistedEnvironment.ComputeChanges (cognitive 31) src/UniGetUI.Core.Tools/PersistedEnvironment.cs:97 — PersistedEnvironment.ComputeChanges has cognitive complexity 31 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · InstalledPackagesLoader.ReloadPackagesSilently (cognitive 31) · ×1
  • InstalledPackagesLoader.ReloadPackagesSilently (cognitive 31) src/UniGetUI.PackageEngine.PackageLoader/InstalledPackagesLoader.cs:51 — InstalledPackagesLoader.ReloadPackagesSilently has cognitive complexity 31 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · Pip.ResolveLatestCompatibleVersion (cognitive 31) · ×1
  • Pip.ResolveLatestCompatibleVersion (cognitive 31) src/UniGetUI.PackageEngine.Managers.Pip/Pip.cs:663 — Pip.ResolveLatestCompatibleVersion has cognitive complexity 31 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · IgnoredUpdatesDialog.ShowAsync (cognitive 31) · ×1
  • IgnoredUpdatesDialog.ShowAsync (cognitive 31) src/UniGetUI.Tui/Views/Dialogs/IgnoredUpdatesDialog.cs:64 — IgnoredUpdatesDialog.ShowAsync has cognitive complexity 31 (threshold 15). To reduce it, flatten the nesting: invert conditions into early returns or guard clauses so the happy path stays at one level, and lift the deepest nested block into its own named function.
D2 · Cognitive Complexity · StartMenuShortcutsDatabase.HandleNewShortcuts (cognitive 30) · ×1
  • StartMenuShortcutsDatabase.HandleNewShortcuts (cognitive 30) src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs:611 — StartMenuShortcutsDatabase.HandleNewShortcuts has cognitive complexity 30 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · NativeWinGetHelper.FindPackages_UnSafe (cognitive 30) · ×1
  • NativeWinGetHelper.FindPackages_UnSafe (cognitive 30) src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/NativeWinGetHelper.cs:300 — NativeWinGetHelper.FindPackages_UnSafe has cognitive complexity 30 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · BaseNuGetDetailsHelper.GetDetails_UnSafe (cognitive 30) · ×1
  • BaseNuGetDetailsHelper.GetDetails_UnSafe (cognitive 30) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGetDetailsHelper.cs:23 — BaseNuGetDetailsHelper.GetDetails_UnSafe has cognitive complexity 30 (threshold 15). To reduce it, flatten the nesting: invert conditions into early returns or guard clauses so the happy path stays at one level, and lift the deepest nested block into its own named function.
D2 · Cognitive Complexity · AgentSkillsViewModel.LoadSkillsAsync (cognitive 29) · ×1
  • AgentSkillsViewModel.LoadSkillsAsync (cognitive 29) src/UniGetUI.Avalonia/ViewModels/Pages/AgentSkillsViewModel.cs:877 — AgentSkillsViewModel.LoadSkillsAsync has cognitive complexity 29 (threshold 15). Most of this is not in the body itself: 4 of the 29 points are its own statements and the rest belongs to 2 function literals inside it that branch (lines 878, 881). The decisions are inside those literals, which nothing outside this body can call, review or test on its own, so splitting the enclosing body is not the move available here. To reduce it, lift the literals' work into a named function or method at the enclosing scope and have each literal call it, then reduce whichever part then reads as the largest.
D2 · Cognitive Complexity · MainWindow.Window_KeyDown (cognitive 29) · ×1
  • MainWindow.Window_KeyDown (cognitive 29) src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:408 — MainWindow.Window_KeyDown has cognitive complexity 29 (threshold 15). To reduce it, name the conditions: bind each compound test to a well-named local or a small predicate function, so the body reads as a sequence of named decisions rather than a chain of operators.
D2 · Cognitive Complexity · WindowsPeerAuthenticator.Authenticate (cognitive 29) · ×1
  • WindowsPeerAuthenticator.Authenticate (cognitive 29) src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/Interop/WindowsPeerAuthenticator.cs:72 — WindowsPeerAuthenticator.Authenticate has cognitive complexity 29 (threshold 15). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition.
D2 · Cognitive Complexity · AgentSkillsViewModel.EmptyTitle.get (cognitive 28) · ×1
  • AgentSkillsViewModel.EmptyTitle.get (cognitive 28) src/UniGetUI.Avalonia/ViewModels/Pages/AgentSkillsViewModel.cs:219 — AgentSkillsViewModel.EmptyTitle.get has cognitive complexity 28 (threshold 15). To reduce it, flatten the nesting: invert conditions into early returns or guard clauses so the happy path stays at one level, and lift the deepest nested block into its own named function.
D2 · Cognitive Complexity · MainWindow.SetupTitleBar (cognitive 28) · ×1
  • MainWindow.SetupTitleBar (cognitive 28) src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:694 — MainWindow.SetupTitleBar has cognitive complexity 28 (threshold 15). Of this number, 26 points are the body's own statements and 2 belong to one function literal inside it that branches. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · Program.Run (cognitive 28) · ×1
  • Program.Run (cognitive 28) src/UniGetUI.AgentSkills.Cli/Main.cs:254 — Program.Run has cognitive complexity 28 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · ValidateCommand.ValidatePath (cognitive 28) · ×1
  • ValidateCommand.ValidatePath (cognitive 28) src/UniGetUI.AgentSkills.Cli/Validate.cs:631 — ValidateCommand.ValidatePath has cognitive complexity 28 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · BrokerRequestValidator.Validate (cognitive 28) · ×1
  • BrokerRequestValidator.Validate (cognitive 28) src/UniGetUI.PackageEngine.AgentBroker/BrokerRequestValidator.cs:50 — BrokerRequestValidator.Validate has cognitive complexity 28 (threshold 15). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.
D2 · Cognitive Complexity · ProcessTaskLogger.AsColoredString (cognitive 28) · ×1
  • ProcessTaskLogger.AsColoredString (cognitive 28) src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/ManagerLogger.cs:230 — ProcessTaskLogger.AsColoredString has cognitive complexity 28 (threshold 15). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.
D2 · Cognitive Complexity · PipPkgDetailsHelper.GetDetails_UnSafe (cognitive 27) · ×1
  • PipPkgDetailsHelper.GetDetails_UnSafe (cognitive 27) src/UniGetUI.PackageEngine.Managers.Pip/Helpers/PipPkgDetailsHelper.cs:18 — PipPkgDetailsHelper.GetDetails_UnSafe has cognitive complexity 27 (threshold 15). To reduce it, flatten the nesting: invert conditions into early returns or guard clauses so the happy path stays at one level, and lift the deepest nested block into its own named function.
D2 · Cognitive Complexity · NuGetV3Client.ParseNuspec (cognitive 27) · ×1
  • NuGetV3Client.ParseNuspec (cognitive 27) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs:829 — NuGetV3Client.ParseNuspec has cognitive complexity 27 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · UserAvatarViewModel.RefreshAsync (cognitive 26) · ×1
  • UserAvatarViewModel.RefreshAsync (cognitive 26) src/UniGetUI.Avalonia/ViewModels/Controls/UserAvatarViewModel.cs:67 — UserAvatarViewModel.RefreshAsync has cognitive complexity 26 (threshold 15). Of this number, 25 points are the body's own statements and 1 belongs to one function literal inside it that branches. To reduce it, flatten the nesting: invert conditions into early returns or guard clauses so the happy path stays at one level, and lift the deepest nested block into its own named function.
D2 · Cognitive Complexity · UseCommand.ParseOptions (cognitive 26) · ×1
  • UseCommand.ParseOptions (cognitive 26) src/UniGetUI.AgentSkills.Cli/Use.cs:34 — UseCommand.ParseOptions has cognitive complexity 26 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · AgentSkillsService.Search (cognitive 26) · ×1
  • AgentSkillsService.Search (cognitive 26) src/UniGetUI.Extensions.AgentSkills/AgentSkillsService.cs:186 — AgentSkillsService.Search has cognitive complexity 26 (threshold 15). Of this number, 25 points are the body's own statements and 1 belongs to one function literal inside it that branches. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · TuiFormField.Render (cognitive 26) · ×1
  • TuiFormField.Render (cognitive 26) src/UniGetUI.Tui/Views/Controls/TuiFormField.cs:92 — TuiFormField.Render has cognitive complexity 26 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · Ui.IsWide (cognitive 25) · ×1
  • Ui.IsWide (cognitive 25) src/UniGetUI.AgentSkills.Cli/Ui.cs:81 — Ui.IsWide has cognitive complexity 25 (threshold 15). To reduce it, name the conditions: bind each compound test to a well-named local or a small predicate function, so the body reads as a sequence of named decisions rather than a chain of operators.
D2 · Cognitive Complexity · IpcClient.BuildPackageQueryParameters (cognitive 25) · ×1
  • IpcClient.BuildPackageQueryParameters (cognitive 25) src/UniGetUI.Interface.IpcApi/IpcClient.cs:1435 — IpcClient.BuildPackageQueryParameters has cognitive complexity 25 (threshold 15). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition.
D2 · Cognitive Complexity · ArpEntries.ReadRegistry (cognitive 25) · ×1
  • ArpEntries.ReadRegistry (cognitive 25) src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/ArpEntries.cs:36 — ArpEntries.ReadRegistry has cognitive complexity 25 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PeReader.ReadResources (cognitive 25) · ×1
  • PeReader.ReadResources (cognitive 25) src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/PeReader.cs:139 — PeReader.ReadResources has cognitive complexity 25 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · MainWindow.RenderMenu (cognitive 25) · ×1
  • MainWindow.RenderMenu (cognitive 25) src/UniGetUI.Tui/Views/MainWindow.cs:963 — MainWindow.RenderMenu has cognitive complexity 25 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · CatalogEditorPage.PinVersionAsync (cognitive 24) · ×1
  • CatalogEditorPage.PinVersionAsync (cognitive 24) src/UniGetUI.Avalonia/Views/SoftwarePages/CatalogEditorPage.cs:299 — CatalogEditorPage.PinVersionAsync has cognitive complexity 24 (threshold 15). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.
D2 · Cognitive Complexity · AddCommand.Run (cognitive 24) · ×1
  • AddCommand.Run (cognitive 24) src/UniGetUI.AgentSkills.Cli/AddRun.cs:107 — AddCommand.Run has cognitive complexity 24 (threshold 15). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.
D2 · Cognitive Complexity · AddCommand.PrintInstalledNote (cognitive 24) · ×1
  • AddCommand.PrintInstalledNote (cognitive 24) src/UniGetUI.AgentSkills.Cli/AddRun.cs:657 — AddCommand.PrintInstalledNote has cognitive complexity 24 (threshold 15). Of this number, 23 points are the body's own statements and 1 belongs to one function literal inside it that branches. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · DetectAgent.DetermineAgent (cognitive 24) · ×1
  • DetectAgent.DetermineAgent (cognitive 24) src/UniGetUI.AgentSkills.Cli/DetectAgent.cs:14 — DetectAgent.DetermineAgent has cognitive complexity 24 (threshold 15). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition.
D2 · Cognitive Complexity · GhInstalled.CheckGhSkills (cognitive 24) · ×1
  • GhInstalled.CheckGhSkills (cognitive 24) src/UniGetUI.AgentSkills.Cli/GhInstalled.cs:199 — GhInstalled.CheckGhSkills has cognitive complexity 24 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · CargoInstallTracker.GetBuildArgumentsAsync (cognitive 24) · ×1
  • CargoInstallTracker.GetBuildArgumentsAsync (cognitive 24) src/UniGetUI.PackageEngine.Managers.Cargo/CargoInstallTracker.cs:19 — CargoInstallTracker.GetBuildArgumentsAsync has cognitive complexity 24 (threshold 15). Of this number, 21 points are the body's own statements and 3 belong to one function literal inside it that branches. To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition.
D2 · Cognitive Complexity · WinGetCliHelper.ParseAvailableUpdates (cognitive 24) · ×1
  • WinGetCliHelper.ParseAvailableUpdates (cognitive 24) src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetCliHelper.cs:98 — WinGetCliHelper.ParseAvailableUpdates has cognitive complexity 24 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · NuGetV3Client.GetRegistrationVersions (cognitive 24) · ×1
  • NuGetV3Client.GetRegistrationVersions (cognitive 24) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs:352 — NuGetV3Client.GetRegistrationVersions has cognitive complexity 24 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · CrashHandler.ReportFatalException (cognitive 23) · ×1
  • CrashHandler.ReportFatalException (cognitive 23) src/UniGetUI.Avalonia/CrashHandler.cs:142 — CrashHandler.ReportFatalException has cognitive complexity 23 (threshold 15). Of this number, 20 points are the body's own statements and 3 belong to one function item inside it that branches. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · OperationViewModel.RebuildMenu (cognitive 23) · ×1
  • OperationViewModel.RebuildMenu (cognitive 23) src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationViewModel.cs:242 — OperationViewModel.RebuildMenu has cognitive complexity 23 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · MainWindowViewModel.MainWindowViewModel.ctor (cognitive 23) · ×1
  • MainWindowViewModel.MainWindowViewModel.ctor (cognitive 23) src/UniGetUI.Avalonia/ViewModels/MainWindowViewModel.cs:506 — MainWindowViewModel.MainWindowViewModel.ctor has cognitive complexity 23 (threshold 15). Of this number, 13 points are the body's own statements and 10 belong to 5 function literals inside it that branch. To reduce it, split the body: this score is breadth rather than depth — many checks laid out side by side rather than nested inside one another, so inverting conditions into early returns has nothing left to flatten. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D2 · Cognitive Complexity · GhInstalled.ScanGhSkills (cognitive 23) · ×1
  • GhInstalled.ScanGhSkills (cognitive 23) src/UniGetUI.AgentSkills.Cli/GhInstalled.cs:159 — GhInstalled.ScanGhSkills has cognitive complexity 23 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · UseCommand.ResolveSkill (cognitive 23) · ×1
  • UseCommand.ResolveSkill (cognitive 23) src/UniGetUI.AgentSkills.Cli/Use.cs:264 — UseCommand.ResolveSkill has cognitive complexity 23 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · UpdaterDownloadEngine.DownloadInstallerPartAsync (cognitive 23) · ×1
  • UpdaterDownloadEngine.DownloadInstallerPartAsync (cognitive 23) src/UniGetUI.Core.Tools/UpdaterDownloadEngine.cs:102 — UpdaterDownloadEngine.DownloadInstallerPartAsync has cognitive complexity 23 (threshold 15). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition.
D2 · Cognitive Complexity · IpcCliSyntax.Parse (cognitive 23) · ×1
  • IpcCliSyntax.Parse (cognitive 23) src/UniGetUI.Interface.IpcApi/IpcCliSyntax.cs:27 — IpcCliSyntax.Parse has cognitive complexity 23 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · BrokerRequestValidator.FindUnsupportedOptions (cognitive 23) · ×1
  • BrokerRequestValidator.FindUnsupportedOptions (cognitive 23) src/UniGetUI.PackageEngine.AgentBroker/BrokerRequestValidator.cs:192 — BrokerRequestValidator.FindUnsupportedOptions has cognitive complexity 23 (threshold 15). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition.
D2 · Cognitive Complexity · ArpRegistryHelper.BuildIndex (cognitive 23) · ×1
  • ArpRegistryHelper.BuildIndex (cognitive 23) src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Helpers/ArpRegistryHelper.cs:111 — ArpRegistryHelper.BuildIndex has cognitive complexity 23 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · Cargo.GetPackages (cognitive 23) · ×1
  • Cargo.GetPackages (cognitive 23) src/UniGetUI.PackageEngine.Managers.Cargo/Cargo.cs:230 — Cargo.GetPackages has cognitive complexity 23 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · CargoManagedInstaller.TryPerformAsync (cognitive 23) · ×1
  • CargoManagedInstaller.TryPerformAsync (cognitive 23) REDACTED:18 — CargoManagedInstaller.TryPerformAsync has cognitive complexity 23 (threshold 15). Of this number, 20 points are the body's own statements and 3 belong to 2 function literals inside it that branch. To reduce it, split the body: this score is breadth rather than depth — many checks laid out side by side rather than nested inside one another, so inverting conditions into early returns has nothing left to flatten. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D2 · Cognitive Complexity · CargoPkgOperationHelper._getOperationParameters (cognitive 23) · ×1
  • CargoPkgOperationHelper._getOperationParameters (cognitive 23) src/UniGetUI.PackageEngine.Managers.Cargo/Helpers/CargoPkgOperationHelper.cs:18 — CargoPkgOperationHelper._getOperationParameters has cognitive complexity 23 (threshold 15). Of this number, 22 points are the body's own statements and 1 belongs to one function literal inside it that branches. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · Scoop.ParseAvailableUpdates (cognitive 23) · ×1
  • Scoop.ParseAvailableUpdates (cognitive 23) src/UniGetUI.PackageEngine.Managers.Scoop/Scoop.cs:403 — Scoop.ParseAvailableUpdates has cognitive complexity 23 (threshold 15). Of this number, 22 points are the body's own statements and 1 belongs to one function literal inside it that branches. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · InstalledMatcher.FindByName (cognitive 23) · ×1
  • InstalledMatcher.FindByName (cognitive 23) src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/InstalledMatcher.cs:38 — InstalledMatcher.FindByName has cognitive complexity 23 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · TuiMaintenanceScheduler.Evaluate (cognitive 23) · ×1
  • TuiMaintenanceScheduler.Evaluate (cognitive 23) src/UniGetUI.Tui/Infrastructure/TuiMaintenance.cs:180 — TuiMaintenanceScheduler.Evaluate has cognitive complexity 23 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · AgentSkillsViewModel.RefreshLibraryItems (cognitive 22) · ×1
  • AgentSkillsViewModel.RefreshLibraryItems (cognitive 22) src/UniGetUI.Avalonia/ViewModels/Pages/AgentSkillsViewModel.cs:407 — AgentSkillsViewModel.RefreshLibraryItems has cognitive complexity 22 (threshold 15). Most of this is not in the body itself: 5 of the 22 points are its own statements and the rest belongs to 6 function literals inside it that branch (lines 425, 444, 422, …). The decisions are inside those literals, which nothing outside this body can call, review or test on its own, so splitting the enclosing body is not the move available here. To reduce it, lift the literals' work into a named function or method at the enclosing scope and have each literal call it, then reduce whichever part then reads as the largest.
D2 · Cognitive Complexity · AgentPolicyInspectorViewModel.ApplyManagementSnapshot (cognitive 22) · ×1
  • AgentPolicyInspectorViewModel.ApplyManagementSnapshot (cognitive 22) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/AgentPolicyInspectorViewModel.cs:684 — AgentPolicyInspectorViewModel.ApplyManagementSnapshot has cognitive complexity 22 (threshold 15). To reduce it, flatten the nesting: invert conditions into early returns or guard clauses so the happy path stays at one level, and lift the deepest nested block into its own named function.
D2 · Cognitive Complexity · SmoothScrollManager.TryAttachOverpanTransform (cognitive 22) · ×1
  • SmoothScrollManager.TryAttachOverpanTransform (cognitive 22) src/UniGetUI.Avalonia/Views/Controls/SmoothScrollManager.cs:510 — SmoothScrollManager.TryAttachOverpanTransform has cognitive complexity 22 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · SoftwareUpdatesPage.WhenPackagesLoaded (cognitive 22) · ×1
  • SoftwareUpdatesPage.WhenPackagesLoaded (cognitive 22) src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:489 — SoftwareUpdatesPage.WhenPackagesLoaded has cognitive complexity 22 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · UpdaterAttemptCoordinator.RunOrJoinAsync (cognitive 22) · ×1
  • UpdaterAttemptCoordinator.RunOrJoinAsync (cognitive 22) src/Shared/AutoUpdater.Helpers.cs:602 — UpdaterAttemptCoordinator.RunOrJoinAsync has cognitive complexity 22 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · Notion.FetchPacks (cognitive 22) · ×1
  • Notion.FetchPacks (cognitive 22) src/UniGetUI.AgentSkills.Cli/Notion.cs:90 — Notion.FetchPacks has cognitive complexity 22 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · CoreTools.VersionStringToStruct (cognitive 22) · ×1
  • CoreTools.VersionStringToStruct (cognitive 22) REDACTED:726 — CoreTools.VersionStringToStruct has cognitive complexity 22 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · AgentSkillsService.PerformAsync (cognitive 22) · ×1
  • AgentSkillsService.PerformAsync (cognitive 22) src/UniGetUI.Extensions.AgentSkills/AgentSkillsService.cs:299 — AgentSkillsService.PerformAsync has cognitive complexity 22 (threshold 15). None of this is in the body itself: all 22 points belong to one function literal inside it that branches (line 306). The decisions are inside the literal, which nothing outside this body can call, review or test on its own, so splitting the enclosing body is not the move available here. To reduce it, lift the literal's work into a named function or method at the enclosing scope and have the literal call it, then reduce whichever part then reads as the largest.
D2 · Cognitive Complexity · GitRepositoryService.ParseWorktreeList (cognitive 22) · ×1
  • GitRepositoryService.ParseWorktreeList (cognitive 22) src/UniGetUI.Extensions.GitRepositories/GitRepositoryService.cs:545 — GitRepositoryService.ParseWorktreeList has cognitive complexity 22 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PkgMetadata.ReadComponentApp (cognitive 22) · ×1
  • PkgMetadata.ReadComponentApp (cognitive 22) src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgMetadata.cs:90 — PkgMetadata.ReadComponentApp has cognitive complexity 22 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · CargoHttp.GetAsync (cognitive 22) · ×1
  • CargoHttp.GetAsync (cognitive 22) src/UniGetUI.PackageEngine.Managers.Cargo/CargoHttp.cs:48 — CargoHttp.GetAsync has cognitive complexity 22 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PolicyEditorDocumentUi.CommitPendingLocalValidity (cognitive 21) · ×1
  • PolicyEditorDocumentUi.CommitPendingLocalValidity (cognitive 21) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorStructuredUi.cs:521 — PolicyEditorDocumentUi.CommitPendingLocalValidity has cognitive complexity 21 (threshold 15). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.
D2 · Cognitive Complexity · MaintenanceScheduler.Evaluate (cognitive 21) · ×1
  • MaintenanceScheduler.Evaluate (cognitive 21) src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:246 — MaintenanceScheduler.Evaluate has cognitive complexity 21 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · UpdateCommand.ProcessWellKnownUpdates (cognitive 21) · ×1
  • UpdateCommand.ProcessWellKnownUpdates (cognitive 21) src/UniGetUI.AgentSkills.Cli/Update.cs:229 — UpdateCommand.ProcessWellKnownUpdates has cognitive complexity 21 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · DWMThreadHelper.ChangeState (cognitive 21) · ×1
  • DWMThreadHelper.ChangeState (cognitive 21) src/UniGetUI.Core.Tools/DWMThreadHelper.cs:137 — DWMThreadHelper.ChangeState has cognitive complexity 21 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PythonVersion.CompareLocal (cognitive 21) · ×1
  • PythonVersion.CompareLocal (cognitive 21) src/UniGetUI.Core.Tools/PythonVersion.cs:248 — PythonVersion.CompareLocal has cognitive complexity 21 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · CursorPluginService.GetCatalogAsync (cognitive 21) · ×1
  • CursorPluginService.GetCatalogAsync (cognitive 21) src/UniGetUI.Extensions.AgentSkills/CursorPluginService.cs:36 — CursorPluginService.GetCatalogAsync has cognitive complexity 21 (threshold 15). None of this is in the body itself: all 21 points belong to one function literal inside it that branches (line 36). The decisions are inside the literal, which nothing outside this body can call, review or test on its own, so splitting the enclosing body is not the move available here. To reduce it, lift the literal's work into a named function or method at the enclosing scope and have the literal call it, then reduce whichever part then reads as the largest.
D2 · Cognitive Complexity · SkillSourceLocator.Parse (cognitive 21) · ×1
  • SkillSourceLocator.Parse (cognitive 21) src/UniGetUI.Extensions.AgentSkills/Sources/SkillSourceLocator.cs:80 — SkillSourceLocator.Parse has cognitive complexity 21 (threshold 15). Of this number, 20 points are the body's own statements and 1 belongs to one function literal inside it that branches. To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition.
D2 · Cognitive Complexity · UpgradablePackagesLoader.IsPackageValid (cognitive 21) · ×1
  • UpgradablePackagesLoader.IsPackageValid (cognitive 21) src/UniGetUI.PackageEngine.PackageLoader/UpgradablePackagesLoader.cs:33 — UpgradablePackagesLoader.IsPackageValid has cognitive complexity 21 (threshold 15). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.
D2 · Cognitive Complexity · NativeTaskLogger.AsColoredString (cognitive 21) · ×1
  • NativeTaskLogger.AsColoredString (cognitive 21) src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/ManagerLogger.cs:404 — NativeTaskLogger.AsColoredString has cognitive complexity 21 (threshold 15). To reduce it, split the body: this score is breadth rather than depth — many checks laid out side by side rather than nested inside one another, so inverting conditions into early returns has nothing left to flatten. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D2 · Cognitive Complexity · InstallOptionsFactory.EnsureSecureOptions (cognitive 21) · ×1
  • InstallOptionsFactory.EnsureSecureOptions (cognitive 21) src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/InstallOptionsFactory.cs:330 — InstallOptionsFactory.EnsureSecureOptions has cognitive complexity 21 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · Scoop.ParseInstalledPackages (cognitive 21) · ×1
  • Scoop.ParseInstalledPackages (cognitive 21) src/UniGetUI.PackageEngine.Managers.Scoop/Scoop.cs:510 — Scoop.ParseInstalledPackages has cognitive complexity 21 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · BaseNuGet.GetAvailableUpdatesFromSource (cognitive 21) · ×1
  • BaseNuGet.GetAvailableUpdatesFromSource (cognitive 21) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs:515 — BaseNuGet.GetAvailableUpdatesFromSource has cognitive complexity 21 (threshold 15). Of this number, 20 points are the body's own statements and 1 belongs to one function literal inside it that branches. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · InstallOptionsViewModel.InstallOptionsViewModel.ctor (cognitive 20) · ×1
  • InstallOptionsViewModel.InstallOptionsViewModel.ctor (cognitive 20) src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:286 — InstallOptionsViewModel.InstallOptionsViewModel.ctor has cognitive complexity 20 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · AgentPluginsViewModel.BrowseMarketplaceAsync (cognitive 20) · ×1
  • AgentPluginsViewModel.BrowseMarketplaceAsync (cognitive 20) src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs:504 — AgentPluginsViewModel.BrowseMarketplaceAsync has cognitive complexity 20 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · AbstractPackagesPage.UpdateFilterPaneColumn (cognitive 20) · ×1
  • AbstractPackagesPage.UpdateFilterPaneColumn (cognitive 20) src/UniGetUI.Avalonia/Views/SoftwarePages/AbstractPackagesPage.axaml.cs:752 — AbstractPackagesPage.UpdateFilterPaneColumn has cognitive complexity 20 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PreviewCommand.HighlightMarkdown (cognitive 20) · ×1
  • PreviewCommand.HighlightMarkdown (cognitive 20) src/UniGetUI.AgentSkills.Cli/Preview.cs:242 — PreviewCommand.HighlightMarkdown has cognitive complexity 20 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · Ui.Multiselect (cognitive 20) · ×1
  • Ui.Multiselect (cognitive 20) src/UniGetUI.AgentSkills.Cli/Ui.cs:683 — Ui.Multiselect has cognitive complexity 20 (threshold 15). Of this number, 10 points are the body's own statements and 10 belong to 2 function literals inside it that branch. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · LanguageData.LoadLanguageTranslatorList (cognitive 20) · ×1
  • LanguageData.LoadLanguageTranslatorList (cognitive 20) src/UniGetUI.Core.LanguageEngine/LanguageData.cs:110 — LanguageData.LoadLanguageTranslatorList has cognitive complexity 20 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · CoreTools.CacheUACForCurrentProcess (cognitive 20) · ×1
  • CoreTools.CacheUACForCurrentProcess (cognitive 20) REDACTED:975 — CoreTools.CacheUACForCurrentProcess has cognitive complexity 20 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · GitRepositoryService.ReadBranchesAsync (cognitive 20) · ×1
  • GitRepositoryService.ReadBranchesAsync (cognitive 20) src/UniGetUI.Extensions.GitRepositories/GitRepositoryService.cs:447 — GitRepositoryService.ReadBranchesAsync has cognitive complexity 20 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · IpcClient.GetRequestTimeout (cognitive 20) · ×1
  • IpcClient.GetRequestTimeout (cognitive 20) src/UniGetUI.Interface.IpcApi/IpcClient.cs:1579 — IpcClient.GetRequestTimeout has cognitive complexity 20 (threshold 15). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition.
D2 · Cognitive Complexity · PackageOperation.PerformBrokerOperation (cognitive 20) · ×1
  • PackageOperation.PerformBrokerOperation (cognitive 20) src/UniGetUI.PackageEngine.Operations/PackageOperations.cs:527 — PackageOperation.PerformBrokerOperation has cognitive complexity 20 (threshold 15). To reduce it, split the body: this score is breadth rather than depth — many checks laid out side by side rather than nested inside one another, so inverting conditions into early returns has nothing left to flatten. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D2 · Cognitive Complexity · NativeWinGetHelper.GetAvailableUpdates_UnSafe (cognitive 20) · ×1
  • NativeWinGetHelper.GetAvailableUpdates_UnSafe (cognitive 20) src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/NativeWinGetHelper.cs:463 — NativeWinGetHelper.GetAvailableUpdates_UnSafe has cognitive complexity 20 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · WinGetPkgOperationHelper.FindPortableArpEntry (cognitive 20) · ×1
  • WinGetPkgOperationHelper.FindPortableArpEntry (cognitive 20) src/UniGetUI.PackageEngine.Managers.WinGet/Helpers/WinGetPkgOperationHelper.cs:1004 — WinGetPkgOperationHelper.FindPortableArpEntry has cognitive complexity 20 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · BaseNuGet.GetAvailableUpdatesLocal (cognitive 20) · ×1
  • BaseNuGet.GetAvailableUpdatesLocal (cognitive 20) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs:329 — BaseNuGet.GetAvailableUpdatesLocal has cognitive complexity 20 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · FakePackageManagerProcess.RunPackageVerb (cognitive 20) · ×1
  • FakePackageManagerProcess.RunPackageVerb (cognitive 20) src/UniGetUI.Tui/FakeData/FakePackageManagerProcess.cs:100 — FakePackageManagerProcess.RunPackageVerb has cognitive complexity 20 (threshold 15). Of this number, 17 points are the body's own statements and 3 belong to 3 function literals inside it that branch. To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.
D2 · Cognitive Complexity · SoftwareCatalog.Parse (cognitive 19) · ×1
  • SoftwareCatalog.Parse (cognitive 19) src/UniGetUI.Avalonia/Models/SoftwareCatalog.cs:167 — SoftwareCatalog.Parse has cognitive complexity 19 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PersistedEnvironment.ComputePath (cognitive 19) · ×1
  • PersistedEnvironment.ComputePath (cognitive 19) src/UniGetUI.Core.Tools/PersistedEnvironment.cs:175 — PersistedEnvironment.ComputePath has cognitive complexity 19 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · CursorPluginService.PerformAsync (cognitive 19) · ×1
  • CursorPluginService.PerformAsync (cognitive 19) src/UniGetUI.Extensions.AgentSkills/CursorPluginService.cs:135 — CursorPluginService.PerformAsync has cognitive complexity 19 (threshold 15). None of this is in the body itself: all 19 points belong to one function literal inside it that branches (line 135). The decisions are inside the literal, which nothing outside this body can call, review or test on its own, so splitting the enclosing body is not the move available here. To reduce it, lift the literal's work into a named function or method at the enclosing scope and have the literal call it, then reduce whichever part then reads as the largest.
D2 · Cognitive Complexity · IpcClient.WaitForBulkOperationAsync (cognitive 19) · ×1
  • IpcClient.WaitForBulkOperationAsync (cognitive 19) src/UniGetUI.Interface.IpcApi/IpcClient.cs:1115 — IpcClient.WaitForBulkOperationAsync has cognitive complexity 19 (threshold 15). Of this number, 17 points are the body's own statements and 2 belong to 2 function literals inside it that branch. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · BasePkgOperationHelper.BuildParameters (cognitive 19) · ×1
  • BasePkgOperationHelper.BuildParameters (cognitive 19) src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Helpers/BasePkgOperationHelper.cs:52 — BasePkgOperationHelper.BuildParameters has cognitive complexity 19 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · ArpRegistryHelper.ReadLocation (cognitive 19) · ×1
  • ArpRegistryHelper.ReadLocation (cognitive 19) src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Helpers/ArpRegistryHelper.cs:162 — ArpRegistryHelper.ReadLocation has cognitive complexity 19 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · BaseNuGetDetailsHelper.GetInstallableVersions_UnSafe (cognitive 19) · ×1
  • BaseNuGetDetailsHelper.GetInstallableVersions_UnSafe (cognitive 19) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGetDetailsHelper.cs:575 — BaseNuGetDetailsHelper.GetInstallableVersions_UnSafe has cognitive complexity 19 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · NuGetV3Client.Search (cognitive 19) · ×1
  • NuGetV3Client.Search (cognitive 19) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs:94 — NuGetV3Client.Search has cognitive complexity 19 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · ManagerLogsPageViewModel.LoadForManager (cognitive 18) · ×1
  • ManagerLogsPageViewModel.LoadForManager (cognitive 18) src/UniGetUI.Avalonia/ViewModels/Pages/LogPages/ManagerLogsPageViewModel.cs:25 — ManagerLogsPageViewModel.LoadForManager has cognitive complexity 18 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PolicyEditorDialogViewModel.OnSessionPropertyChanged (cognitive 18) · ×1
  • PolicyEditorDialogViewModel.OnSessionPropertyChanged (cognitive 18) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorDialogViewModel.cs:139 — PolicyEditorDialogViewModel.OnSessionPropertyChanged has cognitive complexity 18 (threshold 15). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition.
D2 · Cognitive Complexity · PolicyFindingPresentation.DescribeLocation (cognitive 18) · ×1
  • PolicyFindingPresentation.DescribeLocation (cognitive 18) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyValidationFinding.cs:211 — PolicyFindingPresentation.DescribeLocation has cognitive complexity 18 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PackagesPageViewModel.GetSelectedSourceFilters (cognitive 18) · ×1
  • PackagesPageViewModel.GetSelectedSourceFilters (cognitive 18) src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs:1129 — PackagesPageViewModel.GetSelectedSourceFilters has cognitive complexity 18 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · SvgIcon.ParseSvg (cognitive 18) · ×1
  • SvgIcon.ParseSvg (cognitive 18) src/UniGetUI.Avalonia/Views/Controls/SvgIcon.cs:114 — SvgIcon.ParseSvg has cognitive complexity 18 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · SerializationHelpers.ConvertXmlNode (cognitive 18) · ×1
  • SerializationHelpers.ConvertXmlNode (cognitive 18) REDACTED:45 — SerializationHelpers.ConvertXmlNode has cognitive complexity 18 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · CodexAppServerConfigWriter.ReadResultAsync (cognitive 18) · ×1
  • CodexAppServerConfigWriter.ReadResultAsync (cognitive 18) src/UniGetUI.Extensions.AgentSkills/CodexAppServerClient.cs:158 — CodexAppServerConfigWriter.ReadResultAsync has cognitive complexity 18 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · WindowsConsoleHost.PrepareInteractiveIO (cognitive 18) · ×1
  • WindowsConsoleHost.PrepareInteractiveIO (cognitive 18) src/UniGetUI.Interface.IpcApi/WindowsConsoleHost.cs:53 — WindowsConsoleHost.PrepareInteractiveIO has cognitive complexity 18 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · WindowsPolicyWriteElevator.ExchangeAsync (cognitive 18) · ×1
  • WindowsPolicyWriteElevator.ExchangeAsync (cognitive 18) src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/WindowsPolicyWriteElevator.cs:302 — WindowsPolicyWriteElevator.ExchangeAsync has cognitive complexity 18 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PackageOperation._getPostInstallOps (cognitive 18) · ×1
  • PackageOperation._getPostInstallOps (cognitive 18) src/UniGetUI.PackageEngine.Operations/PackageOperations.cs:1723 — PackageOperation._getPostInstallOps has cognitive complexity 18 (threshold 15). Of this number, 14 points are the body's own statements and 4 belong to 2 function items inside it that branch. To reduce it, flatten the nesting: invert conditions into early returns or guard clauses so the happy path stays at one level, and lift the deepest nested block into its own named function.
D2 · Cognitive Complexity · PingetPackageDetailsProvider.TryGetInstallerUrlsCore (cognitive 18) · ×1
  • PingetPackageDetailsProvider.TryGetInstallerUrlsCore (cognitive 18) src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/PingetPackageDetailsProvider.cs:805 — PingetPackageDetailsProvider.TryGetInstallerUrlsCore has cognitive complexity 18 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · TuiCloudBackup.PollAccessTokenAsync (cognitive 18) · ×1
  • TuiCloudBackup.PollAccessTokenAsync (cognitive 18) src/UniGetUI.Tui/Infrastructure/TuiCloudBackup.cs:75 — TuiCloudBackup.PollAccessTokenAsync has cognitive complexity 18 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · MainWindow.OnWindowKeyDown (cognitive 18) · ×1
  • MainWindow.OnWindowKeyDown (cognitive 18) src/UniGetUI.Tui/Views/MainWindow.cs:479 — MainWindow.OnWindowKeyDown has cognitive complexity 18 (threshold 15). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition.
D2 · Cognitive Complexity · GitRepositoriesViewModel.AddPathsAsync (cognitive 17) · ×1
  • GitRepositoriesViewModel.AddPathsAsync (cognitive 17) src/UniGetUI.Avalonia/ViewModels/Pages/GitRepositoriesViewModel.cs:251 — GitRepositoriesViewModel.AddPathsAsync has cognitive complexity 17 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · ManagerHealthRowViewModel.Update (cognitive 17) · ×1
  • ManagerHealthRowViewModel.Update (cognitive 17) src/UniGetUI.Avalonia/ViewModels/Pages/ManagerHealthViewModel.cs:171 — ManagerHealthRowViewModel.Update has cognitive complexity 17 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PackagesPageViewModel.UpdateFilteredState (cognitive 17) · ×1
  • PackagesPageViewModel.UpdateFilteredState (cognitive 17) src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs:803 — PackagesPageViewModel.UpdateFilteredState has cognitive complexity 17 (threshold 15). To reduce it, name the conditions: bind each compound test to a well-named local or a small predicate function, so the body reads as a sequence of named decisions rather than a chain of operators.
D2 · Cognitive Complexity · PackagesPageViewModel.AddSourceToSourcesList (cognitive 17) · ×1
  • PackagesPageViewModel.AddSourceToSourcesList (cognitive 17) src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs:996 — PackagesPageViewModel.AddSourceToSourcesList has cognitive complexity 17 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · SoftwareCatalogViewModel.RefreshAsync (cognitive 17) · ×1
  • SoftwareCatalogViewModel.RefreshAsync (cognitive 17) src/UniGetUI.Avalonia/ViewModels/SoftwarePages/SoftwareCatalogViewModel.cs:334 — SoftwareCatalogViewModel.RefreshAsync has cognitive complexity 17 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · SmoothScrollManager.RouteInput (cognitive 17) · ×1
  • SmoothScrollManager.RouteInput (cognitive 17) src/UniGetUI.Avalonia/Views/Controls/SmoothScrollManager.cs:108 — SmoothScrollManager.RouteInput has cognitive complexity 17 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · AgentSkillsPage.ViewModelChanged (cognitive 17) · ×1
  • AgentSkillsPage.ViewModelChanged (cognitive 17) src/UniGetUI.Avalonia/Views/Pages/AgentSkillsPage.axaml.cs:59 — AgentSkillsPage.ViewModelChanged has cognitive complexity 17 (threshold 15). Most of this is not in the body itself: 7 of the 17 points are its own statements and the rest belongs to 2 function literals inside it that branch (lines 64, 81). The decisions are inside those literals, which nothing outside this body can call, review or test on its own, so splitting the enclosing body is not the move available here. To reduce it, lift the literals' work into a named function or method at the enclosing scope and have each literal call it, then reduce whichever part then reads as the largest.
D2 · Cognitive Complexity · PackageBundlesPage.CreateBatchScriptAsync (cognitive 17) · ×1
  • PackageBundlesPage.CreateBatchScriptAsync (cognitive 17) src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:531 — PackageBundlesPage.CreateBatchScriptAsync has cognitive complexity 17 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PolicyElevationLaunchArguments.TryParse (cognitive 17) · ×1
  • PolicyElevationLaunchArguments.TryParse (cognitive 17) src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/Protocol/PolicyElevationArguments.cs:44 — PolicyElevationLaunchArguments.TryParse has cognitive complexity 17 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · CoreData.UniGetUIUserConfigurationDirectory.get (cognitive 17) · ×1
  • CoreData.UniGetUIUserConfigurationDirectory.get (cognitive 17) src/UniGetUI.Core.Data/CoreData.cs:166 — CoreData.UniGetUIUserConfigurationDirectory.get has cognitive complexity 17 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · NotionCliTool.Locate (cognitive 17) · ×1
  • NotionCliTool.Locate (cognitive 17) src/UniGetUI.Extensions.AgentSkills/NotionCliTool.cs:42 — NotionCliTool.Locate has cognitive complexity 17 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · TrustedPath.Check (cognitive 17) · ×1
  • TrustedPath.Check (cognitive 17) src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/TrustedPath.cs:29 — TrustedPath.Check has cognitive complexity 17 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PkgHelperCommand.InstallAsync (cognitive 17) · ×1
  • PkgHelperCommand.InstallAsync (cognitive 17) src/UniGetUI.PackageEngine.Managers.MacPkg/PkgHelperCommand.cs:295 — PkgHelperCommand.InstallAsync has cognitive complexity 17 (threshold 15). Of this number, 16 points are the body's own statements and 1 belongs to one function literal inside it that branches. To reduce it, split the body: this score is breadth rather than depth — many checks laid out side by side rather than nested inside one another, so inverting conditions into early returns has nothing left to flatten. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D2 · Cognitive Complexity · PEInterface.CreateManagers (cognitive 17) · ×1
  • PEInterface.CreateManagers (cognitive 17) src/UniGetUI.PackageEngine.PackageEngine/PEInterface.cs:89 — PEInterface.CreateManagers has cognitive complexity 17 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · DesktopShortcutsDatabase.HandleNewShortcuts (cognitive 17) · ×1
  • DesktopShortcutsDatabase.HandleNewShortcuts (cognitive 17) src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/DesktopShortcutsDatabase.cs:202 — DesktopShortcutsDatabase.HandleNewShortcuts has cognitive complexity 17 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · DnfPkgDetailsHelper.GetDetails_UnSafe (cognitive 17) · ×1
  • DnfPkgDetailsHelper.GetDetails_UnSafe (cognitive 17) src/UniGetUI.PackageEngine.Managers.Dnf/Helpers/DnfPkgDetailsHelper.cs:15 — DnfPkgDetailsHelper.GetDetails_UnSafe has cognitive complexity 17 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · WinGetTableLayout.MergeContinuationColumns (cognitive 17) · ×1
  • WinGetTableLayout.MergeContinuationColumns (cognitive 17) src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetTableLayout.cs:207 — WinGetTableLayout.MergeContinuationColumns has cognitive complexity 17 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · FakeOperationHelper._getOperationParameters (cognitive 17) · ×1
  • FakeOperationHelper._getOperationParameters (cognitive 17) src/UniGetUI.Tui/FakeData/FakePackageManager.cs:231 — FakeOperationHelper._getOperationParameters has cognitive complexity 17 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · TuiAppHost.Run (cognitive 17) · ×1
  • TuiAppHost.Run (cognitive 17) src/UniGetUI.Tui/TuiAppHost.cs:32 — TuiAppHost.Run has cognitive complexity 17 (threshold 15). To reduce it, split the body: this score is breadth rather than depth — many checks laid out side by side rather than nested inside one another, so inverting conditions into early returns has nothing left to flatten. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D2 · Cognitive Complexity · MainWindow.RunStartupTasksAsync (cognitive 17) · ×1
  • MainWindow.RunStartupTasksAsync (cognitive 17) src/UniGetUI.Tui/Views/MainWindow.cs:225 — MainWindow.RunStartupTasksAsync has cognitive complexity 17 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · MainWindow.HandleGlobalShortcut (cognitive 17) · ×1
  • MainWindow.HandleGlobalShortcut (cognitive 17) src/UniGetUI.Tui/Views/MainWindow.cs:566 — MainWindow.HandleGlobalShortcut has cognitive complexity 17 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · SettingsPage.BuildScheduler (cognitive 17) · ×1
  • SettingsPage.BuildScheduler (cognitive 17) REDACTED:423 — SettingsPage.BuildScheduler has cognitive complexity 17 (threshold 15). Most of this is not in the body itself: 5 of the 17 points are its own statements and the rest belongs to 9 function literals inside it that branch (lines 439, 442, 443, …). The decisions are inside those literals, which nothing outside this body can call, review or test on its own, so splitting the enclosing body is not the move available here. To reduce it, lift the literals' work into a named function or method at the enclosing scope and have each literal call it, then reduce whichever part then reads as the largest.
D2 · Cognitive Complexity · MainWindowViewModel.NavigateToAsync (cognitive 16) · ×1
  • MainWindowViewModel.NavigateToAsync (cognitive 16) src/UniGetUI.Avalonia/ViewModels/MainWindowViewModel.cs:917 — MainWindowViewModel.NavigateToAsync has cognitive complexity 16 (threshold 15). To reduce it, split the body: this score is breadth rather than depth — many checks laid out side by side rather than nested inside one another, so inverting conditions into early returns has nothing left to flatten. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D2 · Cognitive Complexity · AgentPluginsViewModel.ReadInstalledCatalogAsync (cognitive 16) · ×1
  • AgentPluginsViewModel.ReadInstalledCatalogAsync (cognitive 16) src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs:445 — AgentPluginsViewModel.ReadInstalledCatalogAsync has cognitive complexity 16 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · GitRepositoriesViewModel.MeasureRepositoryAsync (cognitive 16) · ×1
  • GitRepositoriesViewModel.MeasureRepositoryAsync (cognitive 16) src/UniGetUI.Avalonia/ViewModels/Pages/GitRepositoriesViewModel.cs:734 — GitRepositoriesViewModel.MeasureRepositoryAsync has cognitive complexity 16 (threshold 15). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition.
D2 · Cognitive Complexity · InternetViewModel.BuildProxyCompatTable (cognitive 16) · ×1
  • InternetViewModel.BuildProxyCompatTable (cognitive 16) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/InternetViewModel.cs:83 — InternetViewModel.BuildProxyCompatTable has cognitive complexity 16 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · SmoothScrollManager.OnFrame (cognitive 16) · ×1
  • SmoothScrollManager.OnFrame (cognitive 16) src/UniGetUI.Avalonia/Views/Controls/SmoothScrollManager.cs:371 — SmoothScrollManager.OnFrame has cognitive complexity 16 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · MainWindow.HitTestResizeBorder (cognitive 16) · ×1
  • MainWindow.HitTestResizeBorder (cognitive 16) src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:1350 — MainWindow.HitTestResizeBorder has cognitive complexity 16 (threshold 15). To reduce it, split the body: this score is breadth rather than depth — many checks laid out side by side rather than nested inside one another, so inverting conditions into early returns has nothing left to flatten. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D2 · Cognitive Complexity · AbstractPackagesPage.PopulateToolbarOverflowFlyout (cognitive 16) · ×1
  • AbstractPackagesPage.PopulateToolbarOverflowFlyout (cognitive 16) src/UniGetUI.Avalonia/Views/SoftwarePages/AbstractPackagesPage.axaml.cs:303 — AbstractPackagesPage.PopulateToolbarOverflowFlyout has cognitive complexity 16 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PolicyElevationAccessPolicy.IsControlRestrictedToTrustedPrincipals (cognitive 16) · ×1
  • PolicyElevationAccessPolicy.IsControlRestrictedToTrustedPrincipals (cognitive 16) src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/Interop/PolicyElevationAccessPolicy.cs:104 — PolicyElevationAccessPolicy.IsControlRestrictedToTrustedPrincipals has cognitive complexity 16 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · InstallLockCommand.Run (cognitive 16) · ×1
  • InstallLockCommand.Run (cognitive 16) src/UniGetUI.AgentSkills.Cli/InstallLock.cs:8 — InstallLockCommand.Run has cognitive complexity 16 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · Ui.WrapWord (cognitive 16) · ×1
  • Ui.WrapWord (cognitive 16) src/UniGetUI.AgentSkills.Cli/Ui.cs:142 — Ui.WrapWord has cognitive complexity 16 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · UseCommand.CopySkillDirectory (cognitive 16) · ×1
  • UseCommand.CopySkillDirectory (cognitive 16) src/UniGetUI.AgentSkills.Cli/Use.cs:180 — UseCommand.CopySkillDirectory has cognitive complexity 16 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · GitRepositoryService.DeleteBranchesAsync (cognitive 16) · ×1
  • GitRepositoryService.DeleteBranchesAsync (cognitive 16) src/UniGetUI.Extensions.GitRepositories/GitRepositoryService.cs:261 — GitRepositoryService.DeleteBranchesAsync has cognitive complexity 16 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PkgFeed.Latest (cognitive 16) · ×1
  • PkgFeed.Latest (cognitive 16) src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgFeed.cs:57 — PkgFeed.Latest has cognitive complexity 16 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PackageOperation.PrepareProcessStartInfo (cognitive 16) · ×1
  • PackageOperation.PrepareProcessStartInfo (cognitive 16) src/UniGetUI.PackageEngine.Operations/PackageOperations.cs:313 — PackageOperation.PrepareProcessStartInfo has cognitive complexity 16 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · StreamedOutputLineBuffer.Append (cognitive 16) · ×1
  • StreamedOutputLineBuffer.Append (cognitive 16) src/UniGetUI.PackageEngine.Operations/PackageOperations.cs:1118 — StreamedOutputLineBuffer.Append has cognitive complexity 16 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · BasePkgDetailsHelper.GetScreenshots (cognitive 16) · ×1
  • BasePkgDetailsHelper.GetScreenshots (cognitive 16) src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Helpers/BasePkgDetailsHelper.cs:134 — BasePkgDetailsHelper.GetScreenshots has cognitive complexity 16 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · Bun.ParseBunOutdatedTable (cognitive 16) · ×1
  • Bun.ParseBunOutdatedTable (cognitive 16) src/UniGetUI.PackageEngine.Managers.Bun/Bun.cs:393 — Bun.ParseBunOutdatedTable has cognitive complexity 16 (threshold 15). Of this number, 14 points are the body's own statements and 2 belong to 2 function literals inside it that branch. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · Npm.ParseSearchOutput (cognitive 16) · ×1
  • Npm.ParseSearchOutput (cognitive 16) src/UniGetUI.PackageEngine.Managers.Npm/Npm.cs:493 — Npm.ParseSearchOutput has cognitive complexity 16 (threshold 15). To reduce it, flatten the nesting: invert conditions into early returns or guard clauses so the happy path stays at one level, and lift the deepest nested block into its own named function.
D2 · Cognitive Complexity · PowerShell7PkgOperationHelper._getOperationParameters (cognitive 16) · ×1
  • PowerShell7PkgOperationHelper._getOperationParameters (cognitive 16) src/UniGetUI.PackageEngine.Managers.PowerShell7/Helpers/PowerShell7PkgOperationHelper.cs:15 — PowerShell7PkgOperationHelper._getOperationParameters has cognitive complexity 16 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · WinFeed.Latest (cognitive 16) · ×1
  • WinFeed.Latest (cognitive 16) src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/WinFeed.cs:38 — WinFeed.Latest has cognitive complexity 16 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · BaseNuGetDetailsHelper.GetDetailsV3 (cognitive 16) · ×1
  • BaseNuGetDetailsHelper.GetDetailsV3 (cognitive 16) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGetDetailsHelper.cs:310 — BaseNuGetDetailsHelper.GetDetailsV3 has cognitive complexity 16 (threshold 15). To reduce it, split the body: this score is breadth rather than depth — many checks laid out side by side rather than nested inside one another, so inverting conditions into early returns has nothing left to flatten. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
D2 · Cognitive Complexity · NuGetV3Client.GetRegistrationPageEntry (cognitive 16) · ×1
  • NuGetV3Client.GetRegistrationPageEntry (cognitive 16) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs:438 — NuGetV3Client.GetRegistrationPageEntry has cognitive complexity 16 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · PackageDetailsDialog.Render (cognitive 16) · ×1
  • PackageDetailsDialog.Render (cognitive 16) src/UniGetUI.Tui/Views/Dialogs/PackageDetailsDialog.cs:127 — PackageDetailsDialog.Render has cognitive complexity 16 (threshold 15). Of this number, 13 points are the body's own statements and 3 belong to one function literal inside it that branches. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · LogsPage.BuildRows (cognitive 16) · ×1
  • LogsPage.BuildRows (cognitive 16) src/UniGetUI.Tui/Views/Pages/LogsPage.cs:200 — LogsPage.BuildRows has cognitive complexity 16 (threshold 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D2 · Cognitive Complexity · ManagerSettingsDialog.AddSourceAsync (cognitive 16) · ×1
  • ManagerSettingsDialog.AddSourceAsync (cognitive 16) src/UniGetUI.Tui/Views/Pages/ManagersPage.cs:299 — ManagerSettingsDialog.AddSourceAsync has cognitive complexity 16 (threshold 15). Of this number, 11 points are the body's own statements and 5 belong to one function literal inside it that branches. To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D35 · Change Coupling · Change coupling clique · ×1
  • Change coupling clique: InstalledPackagesPage.cs, PackageBundlesPage.cs, SoftwareUpdatesPage.cs src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs — 3 files — `src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs`, `src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs`, `src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs` — all change together with no explicit dependency: a fully-connected co-change clique, not 3 separate couplings. They share one concern (thin parallel siblings over a common abstraction), so extract the shared part into ONE unit and the whole clique's coupling clears at once — you do not need to break each pair individually.
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
D4 · Code Duplication · Members sharing a duplicated core (6 members, 50+ identical tokens) · ×1
  • Members sharing a duplicated core (6 members, 50+ identical tokens) src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:103 — src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:103-122 | src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:111-130 | src/UniGetUI.PackageEngine.Managers.Flatpak/Flatpak.cs:106-125 | src/UniGetUI.PackageEngine.Managers.Homebrew/Homebrew.cs:171-179 | src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs:105-124 | src/UniGetUI.PackageEngine.Managers.Snap/Snap.cs:105-124 — These 6 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 6 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 6 times.
D4 · Code Duplication · Members sharing a duplicated core (4 members, 50+ identical tokens) · ×1
  • Members sharing a duplicated core (4 members, 50+ identical tokens) src/UniGetUI.Avalonia/Infrastructure/AvaloniaPackageOperationHelper.cs:44 — src/UniGetUI.Avalonia/Infrastructure/AvaloniaPackageOperationHelper.cs:44-62 | src/UniGetUI.Avalonia/Infrastructure/AvaloniaPackageOperationHelper.cs:65-83 | src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:418-430 | src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:419-445 — These 4 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 4 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 4 times.
D4 · Code Duplication · Edited copy of a member (105 corresponding lines) · ×1
  • Edited copy of a member (105 corresponding lines) src/UniGetUI.PackageEngine.Managers.Bun/Helpers/BunPkgDetailsHelper.cs:27 — src/UniGetUI.PackageEngine.Managers.Bun/Helpers/BunPkgDetailsHelper.cs:27-131 | src/UniGetUI.PackageEngine.Managers.Npm/Helpers/NpmPkgDetailsHelper.cs:20-163 — These two members are one piece of code written twice and then edited apart: 105 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (54 corresponding lines) · ×1
  • Edited copy of a member (54 corresponding lines) src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:79 — src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:79-132 | src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:69-129 — These two members are one piece of code written twice and then edited apart: 54 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (55 corresponding lines) · ×1
  • Edited copy of a member (55 corresponding lines) src/UniGetUI.Avalonia/Views/SoftwarePages/DiscoverSoftwarePage.cs:237 — src/UniGetUI.Avalonia/Views/SoftwarePages/DiscoverSoftwarePage.cs:237-297 | src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:134-188 — These two members are one piece of code written twice and then edited apart: 55 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (76 corresponding lines) · ×1
  • Edited copy of a member (76 corresponding lines) REDACTED:88 — REDACTED:88-179 | REDACTED:246-321 — These two members are one piece of code written twice and then edited apart: 76 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (31 corresponding lines) · ×1
  • Edited copy of a member (31 corresponding lines) src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgFeed.cs:261 — src/UniGetUI.PackageEngine.Managers.MacPkg/Internal/PkgFeed.cs:261-291 | src/UniGetUI.PackageEngine.Managers.WinInstaller/Internal/WinFeed.cs:158-190 — These two members are one piece of code written twice and then edited apart: 31 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (61 corresponding lines) · ×1
  • Edited copy of a member (61 corresponding lines) src/UniGetUI.AgentPolicy.ElevatedHelper/AuthenticatedBrokerTransport.cs:38 — src/UniGetUI.AgentPolicy.ElevatedHelper/AuthenticatedBrokerTransport.cs:38-117 | src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/Shared/BoundedNamedPipeBrokerTransport.cs:46-106 — These two members are one piece of code written twice and then edited apart: 61 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copies of one member (3 members, 49+ corresponding lines) · ×1
  • Edited copies of one member (3 members, 49+ corresponding lines) src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/PackageManager.cs:947 — src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/PackageManager.cs:947-995 | src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/PackageManager.cs:1017-1072 | src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/PackageManager.cs:1101-1151 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 49 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication · Edited copies of one member (3 members, 42+ corresponding lines) · ×1
  • Edited copies of one member (3 members, 42+ corresponding lines) src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:127 — src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:127-168 | src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:135-182 | src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs:129-176 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 42 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication · Edited copy of a member (49 corresponding lines) · ×1
  • Edited copy of a member (49 corresponding lines) src/UniGetUI.PackageEngine.Managers.Dotnet/DotNet.cs:236 — src/UniGetUI.PackageEngine.Managers.Dotnet/DotNet.cs:236-284 | src/UniGetUI.PackageEngine.Managers.Scoop/Scoop.cs:352-401 — These two members are one piece of code written twice and then edited apart: 49 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copies of one member (3 members, 28+ corresponding lines) · ×1
  • Edited copies of one member (3 members, 28+ corresponding lines) REDACTED:659 — REDACTED:659-686 | REDACTED:745-772 | REDACTED:806-833 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 28 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication · Edited copies of one member (3 members, 33+ corresponding lines) · ×1
  • Edited copies of one member (3 members, 33+ corresponding lines) REDACTED:890 — REDACTED:890-923 | REDACTED:926-958 | REDACTED:961-993 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 33 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication · Edited copies of one member (3 members, 29+ corresponding lines) · ×1
  • Edited copies of one member (3 members, 29+ corresponding lines) src/UniGetUI.PackageEngine.AgentBroker/BrokerPolicyInspector.cs:55 — src/UniGetUI.PackageEngine.AgentBroker/BrokerPolicyInspector.cs:55-83 | src/UniGetUI.PackageEngine.AgentBroker/PolicyManagement/BrokerPolicyManagementService.cs:56-85 | src/UniGetUI.PackageEngine.AgentBroker/PolicyManagement/BrokerPolicyManagementService.cs:88-116 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 29 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication · Edited copy of a member (79 corresponding lines) · ×1
  • Edited copy of a member (79 corresponding lines) src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/ManagerLogger.cs:231 — src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/ManagerLogger.cs:231-327 | src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/ManagerLogger.cs:405-483 — These two members are one piece of code written twice and then edited apart: 79 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copies of one member (3 members, 18+ corresponding lines) · ×1
  • Edited copies of one member (3 members, 18+ corresponding lines) src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:508 — src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:508-525 | src/UniGetUI.Interface.IpcApi/IpcBundleApi.cs:661-685 | src/UniGetUI.Tui/Infrastructure/TuiBundleService.cs:218-236 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 18 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication · Edited copy of a member (44 corresponding lines) · ×1
  • Edited copy of a member (44 corresponding lines) src/UniGetUI.PackageEngine.Managers.Npm/Npm.cs:113 — src/UniGetUI.PackageEngine.Managers.Npm/Npm.cs:113-156 | src/UniGetUI.PackageEngine.Managers.Npm/Npm.cs:159-206 — These two members are one piece of code written twice and then edited apart: 44 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copies of one member (3 members, 24+ corresponding lines) · ×1
  • Edited copies of one member (3 members, 24+ corresponding lines) src/UniGetUI.Avalonia/Infrastructure/MacOsNotificationBridge.cs:104 — src/UniGetUI.Avalonia/Infrastructure/MacOsNotificationBridge.cs:104-128 | src/UniGetUI.Avalonia/Infrastructure/MacOsNotificationBridge.cs:131-154 | src/UniGetUI.Avalonia/Infrastructure/MacOsNotificationBridge.cs:174-200 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 24 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication · Edited copy of a member (36 corresponding lines) · ×1
  • Edited copy of a member (36 corresponding lines) src/UniGetUI.Interface.IpcApi/IpcPackageApi.cs:328 — src/UniGetUI.Interface.IpcApi/IpcPackageApi.cs:328-377 | src/UniGetUI.Interface.IpcApi/IpcPackageApi.cs:397-432 — These two members are one piece of code written twice and then edited apart: 36 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copy of a member (22 corresponding lines) · ×1
  • Edited copy of a member (22 corresponding lines) src/UniGetUI.Tui/Views/Controls/TuiForm.cs:102 — src/UniGetUI.Tui/Views/Controls/TuiForm.cs:102-128 | src/UniGetUI.Tui/Views/Controls/TuiForm.cs:234-255 — These two members are one piece of code written twice and then edited apart: 22 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copies of one member (5 members, 39+ corresponding lines) · ×1
  • Edited copies of one member (5 members, 39+ corresponding lines) src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetCliHelper.cs:47 — src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetCliHelper.cs:47-86 | src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetCliHelper.cs:183-225 | src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetCliHelper.cs:287-325 | src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetCliHelper.cs:349-394 | src/UniGetUI.PackageEngine.Managers.WinGet/WinGet.cs:1118-1164 — These 5 members are one piece of code written 5 times and then edited apart: every two of them correspond over at least 39 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 5 times and the copies will drift further apart.
D4 · Code Duplication · Edited copies of one member (3 members, 12+ corresponding lines) · ×1
  • Edited copies of one member (3 members, 12+ corresponding lines) src/UniGetUI.Avalonia/Views/SoftwarePages/DiscoverSoftwarePage.cs:341 — src/UniGetUI.Avalonia/Views/SoftwarePages/DiscoverSoftwarePage.cs:341-353 | src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:334-345 | src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:373-385 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 12 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication · Edited copies of one member (4 members, 25+ corresponding lines) · ×1
  • Edited copies of one member (4 members, 25+ corresponding lines) REDACTED:1093 — REDACTED:1093-1118 | REDACTED:1121-1145 | REDACTED:1176-1206 | REDACTED:1209-1233 — These 4 members are one piece of code written 4 times and then edited apart: every two of them correspond over at least 25 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 4 times and the copies will drift further apart.
D4 · Code Duplication · Edited copies of one member (4 members, 20+ corresponding lines) · ×1
  • Edited copies of one member (4 members, 20+ corresponding lines) REDACTED:1326 — REDACTED:1326-1345 | REDACTED:1356-1375 | REDACTED:1392-1411 | REDACTED:1414-1433 — These 4 members are one piece of code written 4 times and then edited apart: every two of them correspond over at least 20 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 4 times and the copies will drift further apart.
D4 · Code Duplication · Edited copy of a member (40 corresponding lines) · ×1
  • Edited copy of a member (40 corresponding lines) src/UniGetUI.PackageEngine.Managers.Chocolatey/Helpers/ChocolateySourceHelper.cs:55 — src/UniGetUI.PackageEngine.Managers.Chocolatey/Helpers/ChocolateySourceHelper.cs:55-94 | src/UniGetUI.PackageEngine.Managers.PowerShell7/Helpers/PowerShell7SourceHelper.cs:57-101 — These two members are one piece of code written twice and then edited apart: 40 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copies of one member (3 members, 34+ corresponding lines) · ×1
  • Edited copies of one member (3 members, 34+ corresponding lines) src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs:464 — src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs:464-498 | src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs:501-538 | src/UniGetUI.PackageEngine.Managers.Pip/Pip.cs:852-885 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 34 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication · Edited copy of a member (51 corresponding lines) · ×1
  • Edited copy of a member (51 corresponding lines) src/UniGetUI.PackageEngine.Managers.Chocolatey/Helpers/ChocolateyPkgOperationHelper.cs:91 — src/UniGetUI.PackageEngine.Managers.Chocolatey/Helpers/ChocolateyPkgOperationHelper.cs:91-141 | src/UniGetUI.PackageEngine.Managers.Pip/Helpers/PipPkgOperationHelper.cs:19-73 — These two members are one piece of code written twice and then edited apart: 51 consecutive lines correspond almost exactly, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below — the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain — factor the shared implementation into one the two call with their differences as parameters or as an injected step, or, where the difference is systematic (an extra return value, one transport against another), generate one from the other. Left alone, the next edit has to be made twice and the two will drift further apart.
D4 · Code Duplication · Edited copies of one member (3 members, 10+ corresponding lines) · ×1
  • Edited copies of one member (3 members, 10+ corresponding lines) src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs:793 — src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs:793-803 | src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs:957-966 | src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs:977-989 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 10 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication · Edited copies of one member (4 members, 13+ corresponding lines) · ×1
  • Edited copies of one member (4 members, 13+ corresponding lines) src/UniGetUI.Interface.IpcApi/IpcClient.cs:373 — src/UniGetUI.Interface.IpcApi/IpcClient.cs:373-385 | src/UniGetUI.Interface.IpcApi/IpcClient.cs:408-420 | src/UniGetUI.Interface.IpcApi/IpcClient.cs:1012-1024 | src/UniGetUI.Interface.IpcApi/IpcClient.cs:1029-1041 — These 4 members are one piece of code written 4 times and then edited apart: every two of them correspond over at least 13 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 4 times and the copies will drift further apart.
D4 · Code Duplication · Edited copies of one member (4 members, 9+ corresponding lines) · ×1
  • Edited copies of one member (4 members, 9+ corresponding lines) src/UniGetUI.PackageEngine.Managers.Bun/Bun.cs:257 — src/UniGetUI.PackageEngine.Managers.Bun/Bun.cs:257-265 | src/UniGetUI.PackageEngine.Managers.Cargo/Cargo.cs:201-209 | src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs:68-84 | src/UniGetUI.PackageEngine.Managers.Npm/Npm.cs:459-467 — These 4 members are one piece of code written 4 times and then edited apart: every two of them correspond over at least 9 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 4 times and the copies will drift further apart.
D4 · Code Duplication · Edited copies of one member (3 members, 9+ corresponding lines) · ×1
  • Edited copies of one member (3 members, 9+ corresponding lines) src/UniGetUI.PackageEngine.AgentBroker/BrokerPolicyDocumentValidator.cs:43 — src/UniGetUI.PackageEngine.AgentBroker/BrokerPolicyDocumentValidator.cs:43-51 | src/UniGetUI.PackageEngine.AgentBroker/BrokerPolicyInspector.cs:128-136 | src/UniGetUI.PackageEngine.AgentBroker/PolicyManagement/BrokerPolicyManagementService.cs:160-168 — These 3 members are one piece of code written 3 times and then edited apart: every two of them correspond over at least 9 lines, broken only by small local edits. Most of that correspondence is NOT reported as duplicated blocks below: the edits cut it into fragments and only the largest of them clear the block floor, so the rows below understate it. The repair is at the members' grain. Factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Left alone, the next edit has to be made 3 times and the copies will drift further apart.
D4 · Code Duplication · Duplicated block (76 lines × 2) · ×1
  • Duplicated block (76 lines × 2) src/UniGetUI.PackageEngine.Interfaces/IPackageDetails.cs:19 — src/UniGetUI.PackageEngine.Interfaces/IPackageDetails.cs:19-94 | src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/PackageDetails.cs:30-105 — before extracting anything, compare `src/UniGetUI.PackageEngine.Interfaces/IPackageDetails.cs` and `src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/PackageDetails.cs` as WHOLE FILES: 82% of the shorter file's lines also appear in the other, so this reads as one file having been copied from the other rather than as a helper waiting to be extracted. The 1 duplicated block(s) this scan matched between them are fragments of that copy, not the extent of it — treat the file pair as the unit. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place.
D4 · Code Duplication · Duplicated block (52–74 lines × 2) · ×1
  • Duplicated block (52–74 lines × 2) src/UniGetUI.PackageEngine.Managers.Bun/Helpers/BunPkgDetailsHelper.cs:70 — src/UniGetUI.PackageEngine.Managers.Bun/Helpers/BunPkgDetailsHelper.cs:70-121 | src/UniGetUI.PackageEngine.Managers.Npm/Helpers/NpmPkgDetailsHelper.cs:80-153 — before extracting anything, compare `src/UniGetUI.PackageEngine.Managers.Bun/Helpers/BunPkgDetailsHelper.cs` and `src/UniGetUI.PackageEngine.Managers.Npm/Helpers/NpmPkgDetailsHelper.cs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 105 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Npm/Helpers/NpmPkgDetailsHelper.cs:80` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
D4 · Code Duplication · Duplicated block (23–41 lines × 3) · ×1
  • Duplicated block (23–41 lines × 3) src/UniGetUI.PackageEngine.Managers.Chocolatey/Helpers/ChocolateySourceHelper.cs:55 — src/UniGetUI.PackageEngine.Managers.Chocolatey/Helpers/ChocolateySourceHelper.cs:55-94 | src/UniGetUI.PackageEngine.Managers.PowerShell/Helpers/PowerShellSourceHelper.cs:57-97 | src/UniGetUI.PackageEngine.Managers.PowerShell7/Helpers/PowerShell7SourceHelper.cs:79-101 — before extracting anything, compare `src/UniGetUI.PackageEngine.Managers.PowerShell/Helpers/PowerShellSourceHelper.cs` and `src/UniGetUI.PackageEngine.Managers.PowerShell7/Helpers/PowerShell7SourceHelper.cs` as WHOLE FILES: 92% of the shorter file's lines also appear in the other, so this reads as one file having been copied from the other rather than as a helper waiting to be extracted. The 2 duplicated block(s) this scan matched between them are fragments of that copy, not the extent of it — treat the file pair as the unit. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.PowerShell7/Helpers/PowerShell7SourceHelper.cs:79` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
D4 · Code Duplication · Duplicated block (38–41 lines × 2) · ×1
  • Duplicated block (38–41 lines × 2) src/UniGetUI.PackageEngine.Managers.PowerShell/PowerShell.cs:90 — src/UniGetUI.PackageEngine.Managers.PowerShell/PowerShell.cs:90-127 | src/UniGetUI.PackageEngine.Managers.PowerShell7/PowerShell7.cs:92-132 — `src/UniGetUI.PackageEngine.Managers.PowerShell/PowerShell.cs` and `src/UniGetUI.PackageEngine.Managers.PowerShell7/PowerShell7.cs` are one unit implemented once per sibling directory, so they are most likely parallel implementations of one contract rather than a copy of each other — this scan matched 4 separate duplicated blocks between them, totalling at least 85 lines. If both are selected at run time, neither can be retired in favour of the other, and the lines that DIFFER between them are the reason both exist. The move that pays here is to hoist the identical part into a shared location the whole family can reach and give what differs a parameter or a seam, so a change lands once instead of once per sibling; extracting one helper per block leaves every sibling to drift on its own. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
D4 · Code Duplication · Duplicated block (38 lines × 2) · ×1
  • Duplicated block (38 lines × 2) src/UniGetUI.PackageEngine.Managers.PowerShell/Helpers/PowerShellSourceHelper.cs:101 — src/UniGetUI.PackageEngine.Managers.PowerShell/Helpers/PowerShellSourceHelper.cs:101-138 | src/UniGetUI.PackageEngine.Managers.PowerShell7/Helpers/PowerShell7SourceHelper.cs:105-142 — before extracting anything, compare `src/UniGetUI.PackageEngine.Managers.PowerShell/Helpers/PowerShellSourceHelper.cs` and `src/UniGetUI.PackageEngine.Managers.PowerShell7/Helpers/PowerShell7SourceHelper.cs` as WHOLE FILES: 92% of the shorter file's lines also appear in the other, so this reads as one file having been copied from the other rather than as a helper waiting to be extracted. The 2 duplicated block(s) this scan matched between them are fragments of that copy, not the extent of it — treat the file pair as the unit. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
D4 · Code Duplication · Duplicated block (37 lines × 2) · ×1
  • Duplicated block (37 lines × 2) src/UniGetUI.Avalonia/Infrastructure/ProcessEnvironmentConfigurator.cs:63 — src/UniGetUI.Avalonia/Infrastructure/ProcessEnvironmentConfigurator.cs:63-99 | src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:2486-2522 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
D4 · Code Duplication · Duplicated block (34 lines × 2) · ×1
  • Duplicated block (34 lines × 2) src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/ManagerLogger.cs:294 — src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/ManagerLogger.cs:294-327 | src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/ManagerLogger.cs:450-483 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/Classes/ManagerLogger.cs:294` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
D4 · Code Duplication · Duplicated block (31–33 lines × 2) · ×1
  • Duplicated block (31–33 lines × 2) src/UniGetUI.PackageEngine.Managers.Apt/Helpers/AptPkgDetailsHelper.cs:126 — src/UniGetUI.PackageEngine.Managers.Apt/Helpers/AptPkgDetailsHelper.cs:126-158 | src/UniGetUI.PackageEngine.Managers.Dnf/Helpers/DnfPkgDetailsHelper.cs:109-139 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
D4 · Code Duplication · Duplicated block (32 lines × 2) · ×1
  • Duplicated block (32 lines × 2) src/UniGetUI.PackageEngine.Managers.Flatpak/Flatpak.cs:195 — src/UniGetUI.PackageEngine.Managers.Flatpak/Flatpak.cs:195-226 | src/UniGetUI.PackageEngine.Managers.Snap/Snap.cs:194-225 — `src/UniGetUI.PackageEngine.Managers.Flatpak/Flatpak.cs` and `src/UniGetUI.PackageEngine.Managers.Snap/Snap.cs` are one unit implemented once per sibling directory, so they are most likely parallel implementations of one contract rather than a copy of each other — this scan matched 4 separate duplicated blocks between them, totalling at least 112 lines. If both are selected at run time, neither can be retired in favour of the other, and the lines that DIFFER between them are the reason both exist. The move that pays here is to hoist the identical part into a shared location the whole family can reach and give what differs a parameter or a seam, so a change lands once instead of once per sibling; extracting one helper per block leaves every sibling to drift on its own. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
D4 · Code Duplication · Duplicated block (29 lines × 2) · ×1
  • Duplicated block (29 lines × 2) src/UniGetUI.PackageEngine.Managers.Snap/SnapParsing.cs:14 — src/UniGetUI.PackageEngine.Managers.Snap/SnapParsing.cs:14-42 | src/UniGetUI.PackageEngine.Managers.Snap/SnapParsing.cs:97-125 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
D4 · Code Duplication · Duplicated block (20–29 lines × 2) · ×1
  • Duplicated block (20–29 lines × 2) src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:554 — src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:554-582 | src/UniGetUI.Tui/Infrastructure/TuiBundleService.cs:244-263 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:554` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
D4 · Code Duplication · Duplicated block (26 lines × 2) · ×1
  • Duplicated block (26 lines × 2) src/UniGetUI.AgentPolicy.ElevatedHelper/AuthenticatedBrokerTransport.cs:86 — src/UniGetUI.AgentPolicy.ElevatedHelper/AuthenticatedBrokerTransport.cs:86-111 | src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/Shared/BoundedNamedPipeBrokerTransport.cs:80-105 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.AgentPolicy.ElevatedHelper/AuthenticatedBrokerTransport.cs:86` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
D4 · Code Duplication · Duplicated block (24–26 lines × 2) · ×1
  • Duplicated block (24–26 lines × 2) src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:185 — src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:185-210 | src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs:179-202 — `src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs` and `src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs` are one unit implemented once per sibling directory, so they are most likely parallel implementations of one contract rather than a copy of each other — this scan matched 5 separate duplicated blocks between them, totalling at least 99 lines. If both are selected at run time, neither can be retired in favour of the other, and the lines that DIFFER between them are the reason both exist. The move that pays here is to hoist the identical part into a shared location the whole family can reach and give what differs a parameter or a seam, so a change lands once instead of once per sibling; extracting one helper per block leaves every sibling to drift on its own. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:185` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
D4 · Code Duplication · Duplicated block (11–25 lines × 3) · ×1
  • Duplicated block (11–25 lines × 3) src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:186 — src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:186-210 | src/UniGetUI.PackageEngine.Managers.Homebrew/Homebrew.cs:232-242 | src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs:180-202 — `src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs` and `src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs` are one unit implemented once per sibling directory, so they are most likely parallel implementations of one contract rather than a copy of each other — this scan matched 5 separate duplicated blocks between them, totalling at least 99 lines. If both are selected at run time, neither can be retired in favour of the other, and the lines that DIFFER between them are the reason both exist. The move that pays here is to hoist the identical part into a shared location the whole family can reach and give what differs a parameter or a seam, so a change lands once instead of once per sibling; extracting one helper per block leaves every sibling to drift on its own. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:186` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/UniGetUI.PackageEngine.Managers.Homebrew/Homebrew.cs:232` calls `GetSourceOrDefault` and `src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:186` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
D4 · Code Duplication · Duplicated block (25 lines × 2) · ×1
  • Duplicated block (25 lines × 2) src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/InternetViewModel.cs:134 — src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/InternetViewModel.cs:134-158 | src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/UpdatesViewModel.cs:85-109 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/InternetViewModel.cs:134` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The `return` at the foot of the matched lines is the enclosing body's own terminal exit, not an early one: it moves with them unchanged, and each site calls the extracted unit from the position that `return` occupied — no decision has to be handed back and re-acted on.
D4 · Code Duplication · Duplicated block (11–24 lines × 3) · ×1
  • Duplicated block (11–24 lines × 3) src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:458 — src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:458-469 | src/UniGetUI.Interface.IpcApi/IpcBundleApi.cs:626-649 | src/UniGetUI.Tui/Infrastructure/TuiBundleService.cs:120-130 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere all 3 call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made 3 times. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs:458` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.
D4 · Code Duplication · Duplicated block (23–24 lines × 2) · ×1
  • Duplicated block (23–24 lines × 2) src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:127 — src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:127-149 | src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs:129-152 — `src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs` and `src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs` are one unit implemented once per sibling directory, so they are most likely parallel implementations of one contract rather than a copy of each other — this scan matched 3 separate duplicated blocks between them, totalling at least 58 lines. If both are selected at run time, neither can be retired in favour of the other, and the lines that DIFFER between them are the reason both exist. The move that pays here is to hoist the identical part into a shared location the whole family can reach and give what differs a parameter or a seam, so a change lands once instead of once per sibling; extracting one helper per block leaves every sibling to drift on its own. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:127` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D4 · Code Duplication · Duplicated block (22–24 lines × 2) · ×1
  • Duplicated block (22–24 lines × 2) src/UniGetUI.PackageEngine.Managers.Dnf/Helpers/DnfPkgDetailsHelper.cs:16 — src/UniGetUI.PackageEngine.Managers.Dnf/Helpers/DnfPkgDetailsHelper.cs:16-39 | src/UniGetUI.PackageEngine.Managers.Snap/Helpers/SnapPkgDetailsHelper.cs:16-37 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Dnf/Helpers/DnfPkgDetailsHelper.cs:16` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D4 · Code Duplication · Duplicated block (20–22 lines × 3) · ×1
  • Duplicated block (20–22 lines × 3) src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/NativeWinGetHelper.cs:1249 — src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/NativeWinGetHelper.cs:1249-1270 | src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/PingetCliHelper.cs:216-235 | src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/WinGetCliHelper.cs:432-453 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from all 3 call sites, so a change lands once. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/NativeWinGetHelper.cs:1245` calls `CreateNew` and `src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/PingetCliHelper.cs:215` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
D4 · Code Duplication · Duplicated block (21–22 lines × 2) · ×1
  • Duplicated block (21–22 lines × 2) src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:69 — src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:69-90 | src/UniGetUI.Tui/Infrastructure/TuiMaintenance.cs:64-84 — before extracting anything, compare `src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs` and `src/UniGetUI.Tui/Infrastructure/TuiMaintenance.cs` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 49 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
D4 · Code Duplication · Duplicated block (21 lines × 2) · ×1
  • Duplicated block (21 lines × 2) src/UniGetUI.PackageEngine.Managers.Cargo/Cargo.cs:44 — src/UniGetUI.PackageEngine.Managers.Cargo/Cargo.cs:44-64 | src/UniGetUI.PackageEngine.Managers.Npm/Npm.cs:345-365 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
D4 · Code Duplication · Duplicated block (9–20 lines × 6) · ×1
  • Duplicated block (9–20 lines × 6) src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:103 — src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:103-122 | src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:111-130 | src/UniGetUI.PackageEngine.Managers.Flatpak/Flatpak.cs:106-125 | src/UniGetUI.PackageEngine.Managers.Homebrew/Homebrew.cs:171-179 | src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs:105-124 | src/UniGetUI.PackageEngine.Managers.Snap/Snap.cs:105-124 — `src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs` and `src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs` are one unit implemented once per sibling directory, so they are most likely parallel implementations of one contract rather than a copy of each other — this scan matched 3 separate duplicated blocks between them, totalling at least 47 lines. If both are selected at run time, neither can be retired in favour of the other, and the lines that DIFFER between them are the reason both exist. The move that pays here is to hoist the identical part into a shared location the whole family can reach and give what differs a parameter or a seam, so a change lands once instead of once per sibling; extracting one helper per block leaves every sibling to drift on its own.
D4 · Code Duplication · Duplicated block (19 lines × 3) · ×1
  • Duplicated block (19 lines × 3) REDACTED:1991 — REDACTED:1991-2009 | REDACTED:2016-2034 | REDACTED:2041-2059 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit.
D4 · Code Duplication · Duplicated block (18–19 lines × 2) · ×1
  • Duplicated block (18–19 lines × 2) src/UniGetUI.PackageEngine.Operations/AbstractOperation.cs:562 — src/UniGetUI.PackageEngine.Operations/AbstractOperation.cs:562-579 | src/UniGetUI.PackageEngine.Operations/AbstractOperation.cs:667-685 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Operations/AbstractOperation.cs:562` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D4 · Code Duplication · Duplicated block (15–18 lines × 2) · ×1
  • Duplicated block (15–18 lines × 2) src/Shared/AutoUpdater.Helpers.cs:20 — src/Shared/AutoUpdater.Helpers.cs:20-37 | src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:2048-2062 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Read the line range as the matched WINDOW rather than a finished unit: at `src/Shared/AutoUpdater.Helpers.cs:20` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it.
D4 · Code Duplication · Duplicated block (12–18 lines × 2) · ×1
  • Duplicated block (12–18 lines × 2) src/UniGetUI.PackageEngine.Managers.Bun/Helpers/BunPkgDetailsHelper.cs:55 — src/UniGetUI.PackageEngine.Managers.Bun/Helpers/BunPkgDetailsHelper.cs:55-66 | src/UniGetUI.PackageEngine.Managers.Npm/Helpers/NpmPkgDetailsHelper.cs:59-76 — before extracting anything, compare `src/UniGetUI.PackageEngine.Managers.Bun/Helpers/BunPkgDetailsHelper.cs` and `src/UniGetUI.PackageEngine.Managers.Npm/Helpers/NpmPkgDetailsHelper.cs` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 105 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place.
D4 · Code Duplication · Duplicated block (16 lines × 5) · ×1
  • Duplicated block (16 lines × 5) REDACTED:1621 — REDACTED:1621-1636 | REDACTED:1653-1668 | REDACTED:1755-1770 | REDACTED:1844-1859 | REDACTED:1926-1941 — all 5 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `REDACTED:1621` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D4 · Code Duplication · Duplicated block (16 lines × 3) · ×1
  • Duplicated block (16 lines × 3) REDACTED:891 — REDACTED:891-906 | REDACTED:927-942 | REDACTED:962-977 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Read the line range as the matched WINDOW rather than a finished unit: at `REDACTED:891` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D4 · Code Duplication · Duplicated block (12–17 lines × 2) · ×1
  • Duplicated block (12–17 lines × 2) src/UniGetUI.Interface.IpcApi/IpcLogsApi.cs:19 — src/UniGetUI.Interface.IpcApi/IpcLogsApi.cs:19-30 | src/UniGetUI.PackageEngine.Operations/History/OperationHistoryRecord.cs:22-38 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.Interface.IpcApi/IpcLogsApi.cs:19` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D4 · Code Duplication · Duplicated block (13–14 lines × 2) · ×1
  • Duplicated block (13–14 lines × 2) src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs:254 — src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs:254-266 | src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs:340-353 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.Avalonia/ViewModels/Pages/AgentPluginsViewModel.cs:254` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D4 · Code Duplication · Duplicated block (7–14 lines × 2) · ×1
  • Duplicated block (7–14 lines × 2) src/UniGetUI.Avalonia/Infrastructure/GitHubCloudBackupService.cs:102 — src/UniGetUI.Avalonia/Infrastructure/GitHubCloudBackupService.cs:102-115 | src/UniGetUI.Tui/Infrastructure/TuiCloudBackup.cs:229-235 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice.
D4 · Code Duplication · Duplicated block (13 lines × 3) · ×1
  • Duplicated block (13 lines × 3) src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:154 — src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:154-166 | src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs:167-180 | src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs:162-174 — `src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs` and `src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs` are one unit implemented once per sibling directory, so they are most likely parallel implementations of one contract rather than a copy of each other — this scan matched 3 separate duplicated blocks between them, totalling at least 47 lines. If both are selected at run time, neither can be retired in favour of the other, and the lines that DIFFER between them are the reason both exist. The move that pays here is to hoist the identical part into a shared location the whole family can reach and give what differs a parameter or a seam, so a change lands once instead of once per sibling; extracting one helper per block leaves every sibling to drift on its own. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs:154` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
D4 · Code Duplication · Duplicated block (11–13 lines × 2) · ×1
  • Duplicated block (11–13 lines × 2) src/UniGetUI.AgentSkills.Cli/Update.cs:367 — src/UniGetUI.AgentSkills.Cli/Update.cs:367-379 | src/UniGetUI.AgentSkills/Api/UpdateEngine.cs:157-167 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.AgentSkills.Cli/Update.cs:367` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
D4 · Code Duplication · Duplicated block (7–10 lines × 2) · ×1
  • Duplicated block (7–10 lines × 2) src/UniGetUI.Avalonia/ViewModels/Pages/LogPages/UniGetUILogPageViewModel.cs:71 — src/UniGetUI.Avalonia/ViewModels/Pages/LogPages/UniGetUILogPageViewModel.cs:71-80 | src/UniGetUI.Tui/Views/Pages/LogsPage.cs:265-271 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.Avalonia/ViewModels/Pages/LogPages/UniGetUILogPageViewModel.cs:71` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D4 · Code Duplication · Duplicated block (5–9 lines × 4) · ×1
  • Duplicated block (5–9 lines × 4) src/UniGetUI.Avalonia/Infrastructure/AvaloniaPackageOperationHelper.cs:52 — src/UniGetUI.Avalonia/Infrastructure/AvaloniaPackageOperationHelper.cs:52-56 | src/UniGetUI.Avalonia/Infrastructure/AvaloniaPackageOperationHelper.cs:77-81 | src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:424-428 | src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs:430-438 — there are 4 copies across 3 file(s) — more copies than files, so at least one file holds the block twice. Extract it once into a single shared function every call site can reach and call it from all 4 sites; resolving a subset leaves the remainder to drift apart. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `src/UniGetUI.Avalonia/Infrastructure/AvaloniaPackageOperationHelper.cs:52` calls `IsLeftOutOfBulkUpdates` and `src/UniGetUI.Avalonia/Infrastructure/AvaloniaPackageOperationHelper.cs:77` does not — after which the two agree again for 4 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
D4 · Code Duplication · Duplicated block (9 lines × 3) · ×1
  • Duplicated block (9 lines × 3) src/UniGetUI.PackageEngine.Managers.Homebrew/Homebrew.cs:235 — src/UniGetUI.PackageEngine.Managers.Homebrew/Homebrew.cs:235-243 | src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs:194-203 | src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs:235-244 — `src/UniGetUI.PackageEngine.Managers.Homebrew/Homebrew.cs` and `src/UniGetUI.PackageEngine.Managers.Pacman/Pacman.cs` are one unit implemented once per sibling directory, so they are most likely parallel implementations of one contract rather than a copy of each other — this scan matched 4 separate duplicated blocks between them, totalling at least 79 lines. If both are selected at run time, neither can be retired in favour of the other, and the lines that DIFFER between them are the reason both exist. The move that pays here is to hoist the identical part into a shared location the whole family can reach and give what differs a parameter or a seam, so a change lands once instead of once per sibling; extracting one helper per block leaves every sibling to drift on its own. Read the line range as the matched WINDOW rather than a finished unit: at `src/UniGetUI.PackageEngine.Managers.Homebrew/Homebrew.cs:235` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The matched lines also transfer control out of the body holding them, which cannot survive a move into a called unit unchanged: have the extracted unit return that decision and let each site act on it. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
D5 · Coupling · Unstable project UniGetUI.PackageEngine.Managers.Chocolatey · ×1
  • Unstable project UniGetUI.PackageEngine.Managers.Chocolatey src/UniGetUI.PackageEngine.Managers.Chocolatey/UniGetUI.PackageEngine.Managers.Chocolatey.csproj:1 — UniGetUI.PackageEngine.Managers.Chocolatey has instability 0.86 with 2 dependents.
D5 · Coupling · Unstable project UniGetUI.PackageEngine.Managers.PowerShell · ×1
  • Unstable project UniGetUI.PackageEngine.Managers.PowerShell src/UniGetUI.PackageEngine.Managers.PowerShell/UniGetUI.PackageEngine.Managers.PowerShell.csproj:1 — UniGetUI.PackageEngine.Managers.PowerShell has instability 0.86 with 2 dependents.
D5 · Coupling · Unstable project UniGetUI.PackageEngine.Managers.Scoop · ×1
  • Unstable project UniGetUI.PackageEngine.Managers.Scoop src/UniGetUI.PackageEngine.Managers.Scoop/UniGetUI.PackageEngine.Managers.Scoop.csproj:1 — UniGetUI.PackageEngine.Managers.Scoop has instability 0.85 with 2 dependents.
D5 · Coupling · Unstable project UniGetUI.PackageEngine.Managers.WinGet · ×1
  • Unstable project UniGetUI.PackageEngine.Managers.WinGet src/UniGetUI.PackageEngine.Managers.WinGet/UniGetUI.PackageEngine.Managers.WinGet.csproj:1 — UniGetUI.PackageEngine.Managers.WinGet has instability 0.80 with 3 dependents.
D5 · Coupling · Unstable project UniGetUI.PackageEngine.Managers.WinInstaller · ×1
  • Unstable project UniGetUI.PackageEngine.Managers.WinInstaller src/UniGetUI.PackageEngine.Managers.WinInstaller/UniGetUI.PackageEngine.Managers.WinInstaller.csproj:1 — UniGetUI.PackageEngine.Managers.WinInstaller has instability 0.86 with 2 dependents.
IC1 · Incompleteness & stubs · Fake-async · ×1
  • Fake-async — async method never awaits src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/SourceManagerCardViewModel.cs:109 — `ConfirmAddSource` is declared `async` but never awaits anything, so it runs synchronously while pretending to be asynchronous. Drop `async` or do the real async work.
IC1 · Incompleteness & stubs · Both branches open with the same statements · ×1
  • Both branches open with the same statements — the condition does not decide them src/UniGetUI.Avalonia/Views/DialogPages/PackageDetailsWindow.axaml.cs:1033 — The first 2 statements of the `if` and of the `else` are identical, so they run on both paths regardless of the condition. Lift them above the `if` — leaving them duplicated inside makes the branches read as though they handled this differently.
P3 · Security & performance tooling · SAST runs, but gates no merge · ×1
  • SAST runs, but gates no merge — `REDACTED` run(s) a static-analysis scan, but no workflow that runs one is triggered by a pull request (or a merge queue, or an unfiltered push) — the scan fires on a schedule or a manual dispatch only. A vulnerable change therefore merges clean and is reported on the next scheduled run, by which time it is on the default branch and the only remedy is a follow-up fix. Add the pull-request trigger to the workflow that runs the scan so the finding arrives before the merge rather than after it.
SC1 · Supply-chain hygiene · NuGet dependencies are not locked · ×1
  • NuGet dependencies are not locked — No packages.lock.json and no central package management — restores aren't reproducible or pinned (SSDF PW.4.4). Enable <RestorePackagesWithLockFile>true</RestorePackagesWithLockFile> (commit the lockfile) or adopt Directory.Packages.props. Advisory — never scored.
X1 · Async correctness · Blocking `File.ReadAllText` inside an `async` method · ×1
  • Blocking `File.ReadAllText` inside an `async` method src/UniGetUI.Avalonia/App.axaml.cs:299 — `File.ReadAllText` blocks the thread on I/O while `File.ReadAllTextAsync` exists to wait without one — inside a method that is already `async`, await the twin.
X1 · Async correctness · Sync-over-async (deadlock risk) through `.Wait(…)` · ×1
  • Sync-over-async (deadlock risk) through `.Wait(…)` src/UniGetUI.Avalonia/CrashHandler.cs:197 — `.Wait(…)` blocks this thread until the task completes or the bound expires — sync-over-async: it can deadlock under a synchronization context and it parks a thread while it waits. `await` the task (with `.WaitAsync(timeout, token)` where the bound matters).
X18 · Disposal-pattern correctness · Owned disposable field overwritten without releasing the previous instance · ×1
  • Owned disposable field overwritten without releasing the previous instance src/UniGetUI.Avalonia/ViewModels/Pages/GitRepositoriesViewModel.cs:980 — `_detailsLoad` is a `CancellationTokenSource` this type creates itself, and here (line 980) a new instance is written over it — but `LoadDetailsAsync` itself reads through `_detailsLoad` before replacing it, so it expects an instance to be there, and nothing earlier in `LoadDetailsAsync` disposes, closes, saves or hands on the instance being replaced. The assignment makes it unreachable while it still holds what it holds (a timer that keeps firing, a callback registered on a longer-lived token, a socket, a handle), and no later `Dispose` can reach it: the type's own disposal releases only the CURRENT instance. The cost accumulates once per overwrite. Release the previous instance first (`_detailsLoad?.Dispose();` before the assignment), or swap it out with `Interlocked.Exchange` and dispose what comes back.
X18 · Disposal-pattern correctness · Owned disposable field is never released · ×1
  • Owned disposable field is never released src/UniGetUI.Avalonia/Infrastructure/GHAuthApiRunner.cs:20 — `GHAuthApiRunner` implements `IDisposable` — so it has told every caller it holds something worth releasing — and it constructs `_listener` itself (line 20), which makes that instance its own. But `_listener` is named in none of the methods the disposal search covered: `Dispose` (line 144) — that is `Dispose` plus every method `Dispose` calls BY NAME, so a release reached through an interface, a delegate or a base class is not followed and is worth checking before acting. On what was read, the type's disposal releases everything except the one thing it owns. A disposable the owner never disposes is held until finalization if its type has a finalizer, and forever if it does not — which for a synchronisation primitive, a timer, a stream or a handle means the resource accumulates once per instance for the life of the process. Release it in `Dispose` (`_listener?.Dispose();`), or, if it truly does not need releasing, drop `IDisposable` from the type so the claim and the behaviour agree.
Minor — 119 finding(s)
X7 · Silent fallback defaults · Silent fallback default in catch · ×32
  • Silent fallback default in catch src/UniGetUI.Avalonia/CrashHandler.cs:88 — `_reportMissingFiles` swallows every exception and sets `showDetailedReport = false;` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.Avalonia/CrashHandler.cs:136 — `ReadShippedLibraries` swallows every exception into `return [];` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.Avalonia/Models/SoftwareCatalog.cs:154 — `HasUsableCatalog` swallows `Exception` into `return false;` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.Avalonia/ViewModels/DialogPages/CatalogEditorViewModel.cs:151 — `IsMissing` swallows `Exception` into `return true;` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:1113 — `AnalyzeStructuredDirtyAsync` swallows `JsonException` into `return true;` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyValidationFinding.cs:286 — `CopyArguments` swallows `InvalidOperationException` and sets `value = "";` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyValidationFinding.cs:517 — `HasRestriction` swallows `JsonException` into `return false;` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:1320 — `HitTestMaximizeButton` swallows every exception into `return false;` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.Avalonia/Views/MainWindow.axaml.cs:1338 — `HitTestCaptionButtons` swallows every exception into `return false;` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/Shared/AutoUpdater.InstallerArguments.cs:182 — `ReadRecordedInstallPath` swallows every exception into `return null;` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.AgentPolicy.ElevatedHelper/Program.cs:200 — `RunAsync` swallows `Exception` into `return PolicyElevationProtocol.ExitConnectFailed;` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/Interop/PolicyElevationTrustPolicy.cs:147 — `SignersAreEqual` swallows `FormatException` into `return false;` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.AgentSkills.Cli/AddWellKnown.cs:165 — `SafeCanonicalPath` swallows `InvalidOperationException` into `return "";` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.AgentSkills.Cli/GhInstalled.cs:87 — `FrontmatterData` swallows every exception into `return null;` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.AgentSkills.Cli/Preview.cs:388 — `RunPager` swallows `ProcException` into `return false;` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.AgentSkills.Cli/Preview.cs:424 — `FilePicker` swallows `Exception` and sets `bytes = [];` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.AgentSkills.Cli/Term.cs:147 — `TerminalColumns` swallows every exception into `return null;` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.AgentSkills.Cli/Term.cs:161 — `TerminalRows` swallows every exception into `return null;` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.AgentSkills.Cli/Ui.cs:443 — `EnterRawMode` swallows every exception into `return false;` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.AgentSkills.Cli/Update.cs:211 — `SpawnAdd` swallows every exception into `return false;` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.AgentSkills/Agents.cs:110 — `PackageJsonHasDependency` swallows every exception into `return false;` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.AgentSkills/Agents.cs:318 — `GetEveSubagents` swallows every exception into `return [];` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.AgentSkills/Api/InstallEngine.cs:233 — `CreatePreview` swallows `YamlParseException` and sets `frontmatter = new JsonObject();` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.AgentSkills/DownloadSource.cs:59 — `IsValidSkillMarkdown` swallows `YamlParseException` into `return false;` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • Silent fallback default in catch src/UniGetUI.AgentSkills/Fs.cs:21 — `IsLink` swallows every exception into `return false;` — a data error becomes a silent behavior change with no trail. Log the failure or let validation throw.
  • + 7 more in this group — see findings.md.
X10 · Duplicated predicate · Duplicated predicate · ×25
  • Duplicated predicate src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:237 — `!ScheduleEvaluator.IsTimeBased(check.Frequency) || !ScheduleEvaluator.IsDue(check, MaintenanceScheduleStore.GetLastRun(MaintenanceTaskKind.C…` appears character-identically in 2 files — src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs, src/UniGetUI.Tui/Infrastructure/TuiMaintenance.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.Extensions.AgentSkills/ClaudePluginService.cs:191 — `!char.IsAsciiLetterOrDigit(character) && character is not '-' and not '_' and not '.'` appears character-identically in 2 files — src/UniGetUI.Extensions.AgentSkills/ClaudePluginService.cs, src/UniGetUI.Extensions.AgentSkills/IAgentPluginService.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.AgentSkills.Cli/AddRun.cs:577 — `!options.Yes && Ui.Confirm("Proceed with installation?") != true` appears character-identically in 2 files — src/UniGetUI.AgentSkills.Cli/AddRun.cs, src/UniGetUI.AgentSkills.Cli/AddWellKnown.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationViewModel.cs:307 — `!pkgOp.Options.InteractiveInstallation && caps.CanRunInteractively` appears character-identically in 2 files — src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationViewModel.cs, src/UniGetUI.Avalonia/Views/DialogPages/OperationFailedDialog.axaml.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.PackageEngine.AgentBroker/BrokerPolicyInspector.cs:153 — `!string.IsNullOrEmpty(value) && ResponseVersionRegex().IsMatch(value)` appears character-identically in 2 files — src/UniGetUI.PackageEngine.AgentBroker/BrokerPolicyInspector.cs, src/UniGetUI.PackageEngine.AgentBroker/PolicyManagement/BrokerPolicyManagementService.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.Avalonia/Views/Controls/HyperlinkText.cs:78 — `Application.Current?.PlatformSettings?.GetDoubleTapTime(e.Pointer.Type) is { } doubleClickTime && doubleClickTime > TimeSpan.Zero` appears character-identically in 2 files — src/UniGetUI.Avalonia/Views/Controls/HyperlinkText.cs, src/UniGetUI.Avalonia/Views/Controls/LinkTextBlock.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationOutputViewModel.cs:64 — `Application.Current?.TryGetResource(key, theme, out var resource) == true && resource is IBrush brush` appears character-identically in 2 files — src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationOutputViewModel.cs, src/UniGetUI.Avalonia/Views/DialogPages/OperationFailedDialog.axaml.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.PackageEngine.PackageLoader/AbstractPackageLoader.cs:278 — `Contains(package) || !await IsPackageValid(package)` appears character-identically in 2 files — src/UniGetUI.PackageEngine.PackageLoader/AbstractPackageLoader.cs, src/UniGetUI.PackageEngine.PackageLoader/InstalledPackagesLoader.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs:442 — `FALSE_PACKAGE_IDS.Contains(elements[0]) || FALSE_PACKAGE_VERSIONS.Contains(elements[1])` appears character-identically in 4 files — src/UniGetUI.PackageEngine.Managers.Chocolatey/Chocolatey.cs, src/UniGetUI.PackageEngine.Managers.Dotnet/DotNet.cs, src/UniGetUI.PackageEngine.Managers.Pip/Pip.cs, src/UniGetUI.PackageEngine.Managers.Scoop/Scoop.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.PackageEngine.Managers.Homebrew/Homebrew.cs:118 — `File.Exists(path) && !candidates.Contains(path)` appears character-identically in 6 files — src/UniGetUI.PackageEngine.Managers.Apt/Apt.cs, src/UniGetUI.PackageEngine.Managers.Dnf/Dnf.cs, src/UniGetUI.PackageEngine.Managers.Flatpak/Flatpak.cs, src/UniGetUI.PackageEngine.Managers.Homebrew/Homebrew.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs:113 — `MainWindow.Instance is not { } window || !await IgnoreUpdatesConfirmationDialog.ConfirmAsync(window, packages)` appears character-identically in 2 files — src/UniGetUI.Avalonia/Views/SoftwarePages/InstalledPackagesPage.cs, src/UniGetUI.Avalonia/Views/SoftwarePages/SoftwareUpdatesPage.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.AgentSkills.Cli/Update.cs:342 — `NonEmpty(entry, "skillFolderHash") == null || NonEmpty(entry, "skillPath") == null` appears character-identically in 2 files — src/UniGetUI.AgentSkills.Cli/Update.cs, src/UniGetUI.AgentSkills/Api/UpdateEngine.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.AgentSkills.Cli/Update.cs:374 — `NonEmpty(skills[n], "skillPath") is { } p && !blobPaths.Contains(p)` appears character-identically in 2 files — src/UniGetUI.AgentSkills.Cli/Update.cs, src/UniGetUI.AgentSkills/Api/UpdateEngine.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.PackageEngine.Operations/PackageOperations.cs:328 — `OperatingSystem.IsLinux() || Settings.Get(Settings.K.DoCacheAdminRights) || Settings.Get(Settings.K.DoCacheAdminRightsForBatches)` appears character-identically in 2 files — src/UniGetUI.PackageEngine.Operations/PackageOperations.cs, src/UniGetUI.PackageEngine.Operations/SourceOperations.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationViewModel.cs:303 — `OperatingSystem.IsWindows() && !pkgOp.Options.RunAsAdministrator && caps.CanRunAsAdmin` appears character-identically in 2 files — src/UniGetUI.Avalonia/ViewModels/DialogPages/OperationViewModel.cs, src/UniGetUI.Avalonia/Views/DialogPages/OperationFailedDialog.axaml.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.Avalonia/Models/SoftwareCatalog.cs:116 — `OperatingSystem.IsWindows() || OperatingSystem.IsMacOS()` appears character-identically in 2 files — src/UniGetUI.Avalonia/Models/SoftwareCatalog.cs, src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/NotificationsViewModel.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.Avalonia/Models/PackageCollections.cs:340 — `Package.IsUpgradable && Package.NewVersionString != Package.VersionString` appears character-identically in 2 files — src/UniGetUI.Avalonia/Models/PackageCollections.cs, src/UniGetUI.Tui/Views/Pages/PackageListPage.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.AgentSkills.Cli/Update.cs:337 — `S(entry, "sourceType") == "well-known" && NonEmpty(entry, "sourceBaseUrl") is { } b && NonEmpty(entry, "wellKnownDigest") is { } digest` appears character-identically in 2 files — src/UniGetUI.AgentSkills.Cli/Update.cs, src/UniGetUI.AgentSkills/Api/UpdateEngine.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.AgentSkills.Cli/Update.cs:367 — `S(kv.Value, "source") == source && S(kv.Value, "ref") == firstRef` appears character-identically in 2 files — src/UniGetUI.AgentSkills.Cli/Update.cs, src/UniGetUI.AgentSkills/Api/UpdateEngine.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs:269 — `ScheduleEvaluator.IsTimeBased(schedule.Frequency) && !ScheduleEvaluator.IsWithinGrace(schedule, now)` appears character-identically in 2 files — src/UniGetUI.Avalonia/Infrastructure/MaintenanceScheduler.cs, src/UniGetUI.Tui/Infrastructure/TuiMaintenance.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.PackageEngine.Managers.Bun/Bun.cs:259 — `SemanticVersion.TryParse(versionA, out SemanticVersion parsedA) && SemanticVersion.TryParse(versionB, out SemanticVersion parsedB)` appears character-identically in 3 files — src/UniGetUI.PackageEngine.Managers.Bun/Bun.cs, src/UniGetUI.PackageEngine.Managers.Cargo/Cargo.cs, src/UniGetUI.PackageEngine.Managers.Npm/Npm.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.Avalonia/ViewModels/SidebarViewModel.cs:18 — `Settings.Get(Settings.K.EnableSoftwareCatalog) && Settings.Get(Settings.K.EnableCatalogEditor)` appears character-identically in 2 files — src/UniGetUI.Avalonia/ViewModels/SidebarViewModel.cs, src/UniGetUI.Avalonia/ViewModels/SoftwarePages/SoftwareCatalogViewModel.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs:649 — `Settings.Get(Settings.K.UseAgentBroker) && BrokerRequestBuilder.SupportsManager(package.Manager.Name) && !package.Source.IsVirtualManager` appears character-identically in 2 files — src/UniGetUI.Avalonia/ViewModels/DialogPages/InstallOptionsViewModel.cs, src/UniGetUI.PackageEngine.Operations/PackageOperations.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.AgentSkills.Cli/Update.cs:639 — `SourceKey(kv.Value) == source && S(kv.Value, "ref") == r` appears character-identically in 2 files — src/UniGetUI.AgentSkills.Cli/Update.cs, src/UniGetUI.AgentSkills/Api/UpdateEngine.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
  • Duplicated predicate src/UniGetUI.Tui/Infrastructure/TuiSecureSettings.cs:18 — `TuiEngine.IsFakeData || !OperatingSystem.IsWindows()` appears character-identically in 2 files — src/UniGetUI.Tui/Infrastructure/TuiSecureSettings.cs, src/UniGetUI.Tui/Views/Pages/ManagersPage.cs. It is one line, so the duplication detector's token window never sees it; the copies drift when only one is corrected. Give the condition a name and one home.
D34 · Knowledge Freshness · Orphaned file · ×12
  • Orphaned file src/UniGetUI.Core.LanguageEngine/LanguageData.cs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file REDACTED:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/ExternalLibraries.Clipboard/WindowsClipboard.cs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/UniGetUI.Core.Settings/SettingsEngine.cs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/UniGetUI.PackageEngine.Interfaces/IPackageDetails.cs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/UniGetUI.PackageEngine.Serializable/SerializablePackage.cs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/UniGetUI.PackageEngine.Managers.WinGet/Helpers/WinGetSourceHelper.cs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/UniGetUI.Core.SecureSettings/SecureGHTokenManager.cs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/ImportedPackage.cs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/WindowsPackageManager.Interop/Exceptions/WinGetConfigurationException.cs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/UniGetUI.PackageEngine.Interfaces/ManagerHelpers/IPackageDetailsHelper.cs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/UniGetUI.PackageEngine.Interfaces/ManagerHelpers/IMultiSourceHelper.cs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
X7 · Silent fallback defaults · Silent fallback default on parse failure · ×7
  • Silent fallback default on parse failure src/UniGetUI.Avalonia/Models/PackageCollections.cs:696 — `ResolveReleaseDateAsync` falls back to `default` when `DateTime.TryParse(details.UpdateDate, CultureInfo.InvariantCulture, DateTimeStyl…` is false, with no log or throw — a malformed value silently becomes that default. Log the input or fail validation. If that constant is the correct answer to the test rather than a stand-in for a value that could not be read, this is not a silent default: say so in a comment on the member and the row stops firing.
  • Silent fallback default on parse failure src/UniGetUI.Avalonia/ViewModels/Pages/LogPages/OperationHistoryRowViewModel.cs:99 — `Timestamp` falls back to `DateTime.MinValue` when `DateTime.TryParse(Record.TimestampUtc, null, System.Globalization.DateTimeStyles…` is false, with no log or throw — a malformed value silently becomes that default. Log the input or fail validation. If that constant is the correct answer to the test rather than a stand-in for a value that could not be read, this is not a silent default: say so in a comment on the member and the row stops firing.
  • Silent fallback default on parse failure src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorRawSyntax.cs:319 — `PointerFromException` falls back to `""` when `pathInMessage.Success` is false, with no log or throw — a malformed value silently becomes that default. Log the input or fail validation. If that constant is the correct answer to the test rather than a stand-in for a value that could not be read, this is not a silent default: say so in a comment on the member and the row stops firing.
  • Silent fallback default on parse failure src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorSessionViewModel.cs:157 — `SwitchToStructuredAsync` returns `Task.CompletedTask` when `PolicyEditorRawSyntax.TryParseStrict( submitted, out PolicyEditorDraftDocument? …` is false, with no log or throw — a malformed value silently becomes that default. Log the input or fail validation. If that constant is the correct answer to the test rather than a stand-in for a value that could not be read, this is not a silent default: say so in a comment on the member and the row stops firing.
  • Silent fallback default on parse failure src/Shared/AutoUpdater.Helpers.cs:354 — `IsDefaultDevVersion` returns `false` when `Version.TryParse(sanitized, out Version? parsed)` is false, with no log or throw — a malformed value silently becomes that default. Log the input or fail validation. If that constant is the correct answer to the test rather than a stand-in for a value that could not be read, this is not a silent default: say so in a comment on the member and the row stops firing.
  • Silent fallback default on parse failure src/UniGetUI.AgentPolicy.ElevatedHelper/Program.cs:38 — `Main` returns `PolicyElevationProtocol.ExitInvalidArguments` when `PolicyElevationLaunchArguments.TryParse(args, out PolicyElevationLaunchArguments…` is false, with no log or throw — a malformed value silently becomes that default. Log the input or fail validation. If that constant is the correct answer to the test rather than a stand-in for a value that could not be read, this is not a silent default: say so in a comment on the member and the row stops firing.
  • Silent fallback default on parse failure src/UniGetUI.AgentSkills/Api/Inventory.cs:85 — `Remove` falls back to `SkillOperationStatus.Failed` when `r.Success` is false, with no log or throw — a malformed value silently becomes that default. Log the input or fail validation. If that constant is the correct answer to the test rather than a stand-in for a value that could not be read, this is not a silent default: say so in a comment on the member and the row stops firing.
D24 · Comment Value · redundant comment · ×5
  • redundant comment src/UniGetUI.Avalonia/Views/Pages/SettingsPages/PackageManagerPage.axaml.cs:77 — "── Install options panel" repeats the code it sits on: 3 of its 3 words (install, options, panel) are already in `var installOptions = new InstallOptionsPanel(manager);`. Delete it, or replace it with what the code cannot say (why it is done here, a constraint, or a consequence).
  • redundant comment src/UniGetUI.Core.Data/CoreData.cs:168 — "Old config path was the data directory itself" repeats the code it sits on: 5 of its 5 words (old, config, path, data, directory) are already in `string oldConfigPath = UniGetUIDataDirectory; // Old config path was the data directory itself`. Delete it, or replace it with what the code cannot say (why it is done here, a constraint, or a consequence).
  • redundant comment src/UniGetUI.PackageEngine.AgentBroker/PolicyWriteElevation/Interop/PolicyElevationAccessPolicy.cs:126 — "A NULL DACL grants everyone everything." repeats the code it sits on: 4 of its 5 words (null, dacl, grants, everyone) are already in `failure = "The object has a NULL DACL, which grants full control to everyone.";`. Delete it, or replace it with what the code cannot say (why it is done here, a constraint, or a consequence).
  • redundant comment src/UniGetUI.PackageEngine.Managers.WinGet/Helpers/WinGetSourceHelper.cs:66 — "Attempt another source type" repeats the code it sits on: 3 of its 3 words (attempt, source, type) are already in `_attemptedSourceTypes[source.Name] = sourceIndex + 1;`. Delete it, or replace it with what the code cannot say (why it is done here, a constraint, or a consequence).
  • redundant comment src/UniGetUI.PackageEngine.PackageManagerClasses/Manager/PackageManager.cs:343 — "Load manager version" repeats the code it sits on: 3 of its 3 words (load, manager, version) are already in `_loadManagerVersion(out string version);`. Delete it, or replace it with what the code cannot say (why it is done here, a constraint, or a consequence).
X4 · Structured logging · Interpolated log message defeats structured logging · ×5
  • Interpolated log message defeats structured logging src/UniGetUI.Tui/FakeData/FakePackageManager.cs:107 — Logging an interpolated string (`$"..."`) collapses the event to plain text — you lose the named, queryable properties structured logging exists for. Use a message template with placeholders: `LogInformation("User {UserId} did {Action}", id, action)`. If these calls go through a logging wrapper that only accepts a pre-formatted string, give the wrapper a template+args overload that forwards to the underlying logger, then migrate call sites to it.
  • Interpolated log message defeats structured logging src/UniGetUI.Tui/FakeData/FakePackageManager.cs:116 — Logging an interpolated string (`$"..."`) collapses the event to plain text — you lose the named, queryable properties structured logging exists for. Use a message template with placeholders: `LogInformation("User {UserId} did {Action}", id, action)`. If these calls go through a logging wrapper that only accepts a pre-formatted string, give the wrapper a template+args overload that forwards to the underlying logger, then migrate call sites to it.
  • Interpolated log message defeats structured logging src/UniGetUI.Tui/FakeData/FakePackageManager.cs:133 — Logging an interpolated string (`$"..."`) collapses the event to plain text — you lose the named, queryable properties structured logging exists for. Use a message template with placeholders: `LogInformation("User {UserId} did {Action}", id, action)`. If these calls go through a logging wrapper that only accepts a pre-formatted string, give the wrapper a template+args overload that forwards to the underlying logger, then migrate call sites to it.
  • Interpolated log message defeats structured logging src/UniGetUI.Tui/FakeData/FakePackageManager.cs:150 — Logging an interpolated string (`$"..."`) collapses the event to plain text — you lose the named, queryable properties structured logging exists for. Use a message template with placeholders: `LogInformation("User {UserId} did {Action}", id, action)`. If these calls go through a logging wrapper that only accepts a pre-formatted string, give the wrapper a template+args overload that forwards to the underlying logger, then migrate call sites to it.
  • Interpolated log message defeats structured logging src/UniGetUI.Tui/FakeData/FakePackageManager.cs:173 — Logging an interpolated string (`$"..."`) collapses the event to plain text — you lose the named, queryable properties structured logging exists for. Use a message template with placeholders: `LogInformation("User {UserId} did {Action}", id, action)`. If these calls go through a logging wrapper that only accepts a pre-formatted string, give the wrapper a template+args overload that forwards to the underlying logger, then migrate call sites to it.
X6 · Hand-rolled structured-format parsing · Hand-rolled JSON/XML parsing via regex · ×4
  • Hand-rolled JSON/XML parsing via regex src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs:202 — A regex whose pattern encodes JSON/XML syntax is parsing a structured format by hand — malformed or differently-typed content (e.g. `"amount": "5"` as a string) silently mis-parses instead of failing validation. .NET ships a real parser for it (System.Text.Json, System.Xml.Linq); use it here.
  • Hand-rolled JSON/XML parsing via regex src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGet.cs:993 — A regex whose pattern encodes JSON/XML syntax is parsing a structured format by hand — malformed or differently-typed content (e.g. `"amount": "5"` as a string) silently mis-parses instead of failing validation. .NET ships a real parser for it (System.Text.Json, System.Xml.Linq); use it here.
  • Hand-rolled JSON/XML parsing via regex src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGetDetailsHelper.cs:104 — A regex whose pattern encodes JSON/XML syntax is parsing a structured format by hand — malformed or differently-typed content (e.g. `"amount": "5"` as a string) silently mis-parses instead of failing validation. .NET ships a real parser for it (System.Text.Json, System.Xml.Linq); use it here.
  • Hand-rolled JSON/XML parsing via regex src/UniGetUI.PackageEngine.Managers.Generic.NuGet/BaseNuGetDetailsHelper.cs:128 — A regex whose pattern encodes JSON/XML syntax is parsing a structured format by hand — malformed or differently-typed content (e.g. `"amount": "5"` as a string) silently mis-parses instead of failing validation. .NET ships a real parser for it (System.Text.Json, System.Xml.Linq); use it here.
AX6 · Interface segregation · Fat interface · ×3
  • Fat interface: IPackage (40 members) src/UniGetUI.PackageEngine.Interfaces/IPackage.cs:10 — `IPackage` declares 40 members: `Details`, `Tag`, `IsChecked`, `Name`, `Id`, `VersionString`, `HasConcreteVersion`, `InstalledVersionIsUnverified`, `RequiresReinstallToUpdate`, `NormalizedVersion`, `NormalizedNewVersion`, `Source`, `Manager`, `NewVersionString`, `IsUpgradable`, `OverridenOptions`, `AutomationName`, `GetHash`, `GetVersionedHash`, `Equals`, `IsEquivalentTo`, `GetIconId`, `GetIconUrl`, `GetIconUrlIfAny`, `GetScreenshots`, `AddToIgnoredUpdatesAsync`, `RemoveFromIgnoredUpdatesAsync`, `HasUpdatesIgnoredAsync`, `GetIgnoredUpdatesVersionAsync`, `GetInstalledPackages`, `GetAvailablePackage`, `GetUpgradablePackage`, `SetTag`, `NewerVersionIsInstalled`, `GetInstallerFileName`, `IsUpdateMinor`, `IsUpdateMajor`, `GetInstallOptions`, `AsSerializableAsync`, `AsSerializable_Incompatible`. Counted as the author wrote them — a property is ONE member and its get/set accessors are not counted separately, and an event counts once. A wide interface forces every implementer and caller to depend on methods they don't use (the Interface-Segregation 'I' in SOLID). Split it into focused role-interfaces.
  • Fat interface: IPackageDetails (20 members) src/UniGetUI.PackageEngine.Interfaces/IPackageDetails.cs:3 — `IPackageDetails` declares 20 members: `Package`, `IsPopulated`, `Description`, `Publisher`, `Author`, `HomepageUrl`, `License`, `LicenseUrl`, `Version`, `InstallerUrl`, `InstallerHash`, `InstallerType`, `InstallerSize`, `ManifestUrl`, `UpdateDate`, `ReleaseNotes`, `ReleaseNotesUrl`, `Tags`, `Load`, `Dependencies`. Counted as the author wrote them — a property is ONE member and its get/set accessors are not counted separately, and an event counts once. A wide interface forces every implementer and caller to depend on methods they don't use (the Interface-Segregation 'I' in SOLID). Split it into focused role-interfaces.
  • Fat interface: IPackageManager (39 members) src/UniGetUI.PackageEngine.Interfaces/IPackageManager.cs:11 — `IPackageManager` declares 39 members: `Properties`, `Capabilities`, `Status`, `Id`, `Name`, `DisplayName`, `DefaultSource`, `TaskLogger`, `SourcesHelper`, `DetailsHelper`, `OperationHelper`, `Dependencies`, `OutputEncoding`, `InstallerUrlFollowsPackageVersion`, `CommandLineIsShellInterpreted`, `IdentifiersAreQuotedOnCommandLine`, `CompareVersions`, `CanUpdateToExactVersion`, `ResolveSkippedMajorUpdate`, `Initialize`, `IsEnabled`, `IsReady`, `IsInitializing`, `FindPackages`, `FindPackages`, `GetHealthRecord`, `ExpectsInstalledPackages`, `GetMaintenanceActions`, `GetAvailableUpdates`, `LastUpdatesListingFailed`, `LastInstalledListingFailed`, `GetInstalledPackages`, `InstalledPackagesGeneration`, `InvalidateInstalledPackages`, `RefreshPackageIndexes`, `AttemptFastRepair`, `FindCandidateExecutableFiles`, `GetExecutableFile`, `HasExecutable`. Counted as the author wrote them — a property is ONE member and its get/set accessors are not counted separately, and an event counts once. Those 39 declarations carry 38 distinct name(s), so part of the width is overloading rather than separate responsibilities — but 38 operations clears the >15 bar on its own, so the row is about responsibilities, not signatures. A wide interface forces every implementer and caller to depend on methods they don't use (the Interface-Segregation 'I' in SOLID). Split it into focused role-interfaces.
S1 · Web-Security Posture · No security response headers detected · ×2
  • No security response headers detected — None of the 11 security response headers the OWASP Secure Headers Project recommends (Content-Security-Policy, Strict-Transport-Security, X-Content-Type-Options, X-Frame-Options, …) is configured — defense in depth, even when a reverse proxy could set them. (−2.0 on this card.)
  • No security response headers detected REDACTED:76 — This web host's pipeline is composed here and adds no security response header (Content-Security-Policy, Strict-Transport-Security, X-Content-Type-Options, a frame policy) to what it serves.
S1 · Web-Security Posture · No app-layer HTTPS enforcement detected · ×2
  • No app-layer HTTPS enforcement detected — No UseHttpsRedirection/UseHsts and no reverse-proxy signal — transport security is unverified at the app layer. (−2.0 on this card.)
  • No app-layer HTTPS enforcement detected REDACTED:76 — This web host's pipeline is composed here with no UseHttpsRedirection/UseHsts, and nothing says a reverse proxy terminates TLS in front of it.
C2 · Access Controls · No named authorization policies · ×1
  • No named authorization policies — Authorization IS enforced here (by imperative guard methods that throw on violation) — this is NOT a claim that the code is unprotected. What's missing is a NAMED rule set: the guards encode the access rules inline, so the rules can't be listed, reviewed or tested apart from the call sites that apply them. Recommendation, not a defect.
C4 · Data Retention · Partial data-retention evidence · ×1
  • Partial data-retention evidence — A retention mechanism is present, but the data-lifecycle is not yet complete — missing: a scheduled purge / cleanup job (PurgeOlderThan / CleanupJob).
D16 · Bus Factor · Off-boarding risk · ×1
  • Off-boarding risk: anonymized user #1 — If anonymized user #1 becomes unavailable, 50 significant file(s) lose their only recent owner: src/UniGetUI.PackageEngine.PackageManagerClasses/Packages/Classes/StartMenuShortcutsDatabase.cs, src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetV3Client.cs, src/UniGetUI.PackageEngine.Managers.WinGet/ClientHelpers/PingetPackageDetailsProvider.cs, src/UniGetUI.Avalonia/Views/SoftwarePages/PackageBundlesPage.cs, src/UniGetUI.Avalonia/ViewModels/DialogPages/ManageShortcutsViewModel.cs, src/UniGetUI.Core.Tools/ShortcutFileRemover.cs, src/UniGetUI.PackageEngine.Managers.Generic.NuGet/Internal/NuGetLocalFeed.cs, src/UniGetUI.Avalonia/ViewModels/DialogPages/PackageDetailsViewModel.cs (+42 more). Pair on, review, or document these before any departure.
D16 · Bus Factor · Further sole-owners (lower concentration) · ×1
  • Further sole-owners (lower concentration) — 3 other contributor(s) are each the sole owner of a small amount of code below the off-boarding threshold — folded into the bus-factor score and metrics (53 single-owned of 521 analysed files in total, counted over production source files of roughly 2,400 bytes or more, excluding vendored, generated, example/demo and scaffolding-template trees and test files identified by path convention, largest first; 521 of the 767 production source files in this repository met that bar). They are anonymized user #2 (1 file(s)), anonymized user #3 (1 file(s)), anonymized user #4 (1 file(s)) — spread or document their files in the same way, at lower priority than the named off-boarding risks above. The files folded here: src/UniGetUI.Avalonia/Views/Controls/SmoothScrollManager.cs, src/UniGetUI.Avalonia/ViewModels/Pages/SettingsPages/PolicyEditor/PolicyEditorDialogViewModel.cs, src/UniGetUI.Avalonia/Infrastructure/WindowsAvaloniaRenderingPolicy.cs.
D20 · ADR Quality · No ADRs found · ×1
  • No ADRs found — No ADRs found. No recognised ADR directory (`docs/adr/`, `docs/decisions/`, `adr/`, `docs/rfcs/`, an `ADR0001/` folder, or their siblings) exists anywhere in this tree. What was searched, so you can tell an empty log from a search that missed one: every directory under the tree (build output, dependencies and VCS metadata excepted), for a document that is either any non-index page inside a recognised ADR directory, whatever its name and however deeply nested (`docs/adr/use-postgres.md`, `docs/adr/2024/0001-x.md`); or a file anywhere whose name is ADR-shaped (`0001-use-postgres.md`, `adr-012-caching.md`); or, when neither turned anything up, a document carrying the decision-record signature (an "Architecture Decision Record" heading, or Status / Context / Decision / Consequences as section headings). A decision log that clears none of these — unnumbered files outside any recognised directory, without those headings — is not seen by this check and this row is then wrong. If that is your case, say so rather than renaming anything; otherwise, consider recording architectural decisions in `docs/adr/`.
D21 · Naming Consistency · `LicenseURL` spells `URL` where 38 names in the project spell it `Url` · ×1
  • `LicenseURL` spells `URL` where 38 names in the project spell it `Url` src/UniGetUI.Avalonia/ViewModels/Pages/AboutPages/ThirdPartyLicensesViewModel.cs:11 — 38 of 40 names in project UniGetUI.Avalonia spell the token `Url` (38 of 40; unit: names in project UniGetUI.Avalonia containing `Url`). Peers: AutoUpdaterHelpers.IsSourceUrlAllowed (src/Shared/AutoUpdater.Helpers.cs:11); PendingSelfUpdate.InstallerDownloadUrl (src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:80); AvaloniaAutoUpdater.PrepareAndLaunchAsync(installerDownloadUrl) (src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:802); AvaloniaAutoUpdater.IsSourceUrlAllowed (src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:2039); UpdateCandidate.InstallerDownloadUrl (src/UniGetUI.Avalonia/Infrastructure/AvaloniaAutoUpdater.cs:2252). Rename to `LicenseUrl`. [rule N6]
D21 · Naming Consistency · `PackageID` spells `ID` where 76 names in the project spell it `Id` · ×1
  • `PackageID` spells `ID` where 76 names in the project spell it `Id` src/UniGetUI.Avalonia/ViewModels/SoftwarePages/PackagesPageViewModel.cs:80 — 76 of 77 names in project UniGetUI.Avalonia spell the token `Id` (76 of 77; unit: names in project UniGetUI.Avalonia containing `Id`). Peers: AvaloniaPackageOperationHelper.UpdateForIdAsync (src/UniGetUI.Avalonia/Infrastructure/AvaloniaPackageOperationHelper.cs:64); AvaloniaPackageOperationHelper.UpdateForIdAsync(packageId) (src/UniGetUI.Avalonia/Infrastructure/AvaloniaPackageOperationHelper.cs:64); GitHubAuthService.MissingClientId (src/UniGetUI.Avalonia/Infrastructure/GitHubAuthService.cs:12); GitHubAuthService._gitHubClientId (src/UniGetUI.Avalonia/Infrastructure/GitHubAuthService.cs:15); Secrets.GetGitHubClientId (src/UniGetUI.Avalonia/Infrastructure/Secrets.cs:10). Rename to `PackageId`. [rule N6]
D26 · Project Cohesion · Projects may be oversized for their cohesion · ×1
  • Projects may be oversized for their cohesion src/UniGetUI.Avalonia/UniGetUI.Avalonia.csproj:1 — `UniGetUI.Avalonia` overshoots its size bounds (47884 LoC, 303 public types across 24 namespaces). 1 of 66 project(s) overshoot their size bounds, lowering Project Cohesion to 9.7/10. Size alone is no reason to split a project: where its type references show a separable part, a Split row names it.
D27 · Navigability · Pass-through layer · ×1
  • Pass-through layer src/UniGetUI.Tui/Views/Pages/ManagersPage.cs:22 — ManagersPage: all 3 public methods forward their arguments unchanged to _form and add no behaviour — an extra hop (and usually an extra interface) to trace through. Call _form directly, or give the layer a job.
D28 · Secrets (history) · Rotate the exposed credentials · ×1
  • REDACTED
D34 · Knowledge Freshness · Orphaned files with no living knowledge · ×1
  • Orphaned files with no living knowledge — 12 of 521 analysed file(s) have no living knowledge left — their last meaningful change has decayed away, so if one breaks, no one currently understands it (counted over production source files of roughly 2,400 bytes or more, excluding vendored, generated, example/demo and scaffolding-template trees and test files identified by path convention, largest first; 521 of the 767 production source files in this repository met that bar). None is large enough to earn a read-through of its own, so this row stands in for the per-file rows rather than raising one each — most significant first: src/UniGetUI.Core.LanguageEngine/LanguageData.cs, REDACTED, src/ExternalLibraries.Clipboard/WindowsClipboard.cs, src/UniGetUI.Core.Settings/SettingsEngine.cs, src/UniGetUI.PackageEngine.Interfaces/IPackageDetails.cs, src/UniGetUI.PackageEngine.Serializable/SerializablePackage.cs, src/UniGetUI.PackageEngine.Managers.WinGet/Helpers/WinGetSourceHelper.cs, src/UniGetUI.Core.SecureSettings/SecureGHTokenManager.cs (and 4 more). Attach the read to the next change that touches one of them: have a second person review that change, and leave behind a short comment or test recording what the file is for, so the knowledge comes back at the cost of a change you were making anyway.
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
M2 · Architecture documentation · No ADRs · ×1
  • No ADRs — No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
P12 · CI test-gate honesty · Sleep-based test synchronization · ×1
  • Sleep-based test synchronization — 47 Task.Delay/Thread.Sleep call(s) in test code synchronize with background work by sleeping — a known flakiness precursor on slow runners. Prefer polling with a deadline or completion signals.
P2 · Observability · Logging is not universal · ×1
  • Logging is not universal — Only 36/38 service-like projects use logging (pure contract/DTO projects are excluded — they have nothing to log). Of those 38, 2 ship a process this repository operates; the rest are libraries their consumer hosts, where the logging decision belongs to the host.
P2 · Observability · Console output used as the logging channel · ×1
  • Console output used as the logging channel src/UniGetUI.Avalonia/CrashHandler.cs:270 — `src/UniGetUI.Avalonia/CrashHandler.cs` reports through `Console.Write…` at line 270 although other files in its project log through a logger. Console lines carry no level, category or structured properties and never reach the log pipeline or its exporters.
P6 · Release Hygiene · No changelog · ×1
  • No changelog — No CHANGELOG/HISTORY/RELEASES file — what shipped when isn't easy to reconstruct for support or audit. (Versioning/tagging makes releases traceable, but a changelog records the what.)
X2 · Cancellation propagation · Not all async methods take a CancellationToken · ×1
  • Not all async methods take a CancellationToken — Only 150/724 async methods accept a CancellationToken, so in-flight work can't be stopped early when the caller gives up — whatever ends it in your host (shutdown signal, timeout, abandoned request, user cancel). Thread a token through the call chain and honour it at each await and loop; where a method genuinely cannot be interrupted, omitting it is a deliberate choice — judge against your hosting model.
X5 · Nullable reference types · Null-forgiving operator (`!`) suppressions override nullable warnings · ×1
  • Null-forgiving operator (`!`) suppressions override nullable warnings — ~0.3 `!` suppressions per 1k syntax nodes — 272 suppression(s) across the 825025 syntax node(s) in code where nullable warnings are ENABLED, which is the only code a `!` can suppress anything in (a `!` under `#nullable disable` is inert and is not counted, and its file's nodes are not in the denominator). Each one tells the compiler to trust you about null, suppressing the very safety NRTs provide. Many are correct: each is a claim the checker could not verify, and it is wrong only where the value can in fact be missing, so review the densest places first.
X6 · Hand-rolled structured-format parsing · Hand-rolled JSON/XML parsing via string slicing · ×1
  • Hand-rolled JSON/XML parsing via string slicing src/UniGetUI.Avalonia/Views/Pages/SettingsPages/ManagersHomepage.axaml.cs:91 — A JSON key or XML tag is located in the text with IndexOf/Split and the value cut out around it — a reordered, re-spaced or differently-typed document (e.g. `"amount": "5"` as a string) silently mis-parses instead of failing validation. .NET ships a real parser for it (System.Text.Json, System.Xml.Linq); use it here.
X7 · Silent fallback defaults · Silent fallback default on unknown code · ×1
  • Silent fallback default on unknown code src/UniGetUI.Avalonia/App.axaml.cs:381 — `ApplyTheme` maps every unrecognised code to `ThemeVariant.Default`, one of the real values, with no log or throw — a malformed or new code silently reads as a known one. Throw on the unknown code, or log it. If that member is the correct answer for any other code, say so in a comment on the member and the row stops firing.
Minor — 10 finding(s)
D24 · Comment Value · doc comments repeat the names · ×9
  • doc comments repeat the names src/WindowsPackageManager.Interop/WindowsPackageManager/ClassModel.cs:26 — 2 of 2 documented parameters and 2 of 11 summaries in `ExternalLibraries.WindowsPackageManager.Interop` only repeat the member or parameter name (e.g. "Context" for `context`). Delete the restating tags, or add what the name does not say.
  • doc comments repeat the names src/UniGetUI.AgentSkills/Api/Models.cs:142 — 0 of 59 documented parameters and 6 of 109 summaries in `UniGetUI.AgentSkills(net10.0)` only repeat the member or parameter name (e.g. "What to install." for `SkillInstallRequest`). This build requires documentation, so say what the name does not: units, ranges, null handling, side effects.
  • doc comments repeat the names src/UniGetUI.Core.IconStore/IconCacheEngine.cs:102 — 1 of 11 documented parameters and 0 of 15 summaries in `UniGetUI.Core.IconEngine(net10.0)` only repeat the member or parameter name (e.g. "the Id of the package" for `PackageId`). 7 documentation tag(s) are empty. Delete the restating tags, or add what the name does not say.
  • doc comments repeat the names src/UniGetUI.Core.LanguageEngine/LanguageEngine.cs:43 — 0 of 1 documented parameters and 1 of 1 summaries in `UniGetUI.Core.LanguageEngine(net10.0)` only repeat the member or parameter name (e.g. "Loads the specified language into the current instance" for `LoadLanguage`). Delete the restating tags, or add what the name does not say.
  • doc comments repeat the names REDACTED:398 — 1 of 15 documented parameters and 0 of 45 summaries in `UniGetUI.Core.Tools(net10.0)` only repeat the member or parameter name (e.g. "The title of the window" for `WindowTitle`). 1 documentation tag(s) are empty. Delete the restating tags, or add what the name does not say.
  • doc comments repeat the names src/UniGetUI.Extensions.GitRepositories/GitModels.cs:84 — 1 of 36 documented parameters and 0 of 48 summaries in `UniGetUI.Extensions.GitRepositories(net10.0)` only repeat the member or parameter name (e.g. "Whether it was locked with ." for `IsLocked`). Delete the restating tags, or add what the name does not say.
  • doc comments repeat the names src/UniGetUI.PackageEngine.PackageLoader/AbstractPackageLoader.cs:361 — 0 of 7 documented parameters and 1 of 20 summaries in `UniGetUI.PackageEngine.PackageLoaders(net10.0)` only repeat the member or parameter name (e.g. "Loads the packages from the given manager" for `LoadPackagesFromManager`). Delete the restating tags, or add what the name does not say.
  • doc comments repeat the names src/UniGetUI.PackageEngine.Enums/Enums.cs:89 — 0 of 0 documented parameters and 1 of 20 summaries in `UniGetUI.PackageEngine.Structs(net10.0)` only repeat the member or parameter name (e.g. "Lists the installed packages" for `ListInstalledPackages`). Delete the restating tags, or add what the name does not say.
  • doc comments repeat the names src/UniGetUI.Tui/Views/Controls/TuiForm.cs:15 — 0 of 2 documented parameters and 1 of 227 summaries in `UniGetUI.Tui` only repeat the member or parameter name (e.g. "A value option for ." for `TuiOption`). Delete the restating tags, or add what the name does not say.
D10 · Test Quality · Mock framework · ×1
  • Mock framework: NSubstitute — UniGetUI.PackageEngine.Serializable.Tests references NSubstitute.

Appendix B — Reproduction & audit trail

Every external tool invocation behind a deep-scan dimension — the tool, its captured version, the exact command, how many findings it yielded, and a link to the retained raw output. To reproduce any finding: check out the same commit and run the command shown (repo-relative — never an absolute scratch path). The complete raw scanner output is retained verbatim under artifacts/raw/ (indexed in artifacts/raw/index.json); per-invocation exit codes and wall-clock durations are in sidecar.json — kept out of this table so the rendered report stays byte-identical across runs of the same commit.

DimensionToolVersionCommandFindingsRaw output
D28 · Secrets (history)gitleaks—gitleaks detect --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-28bac8513cfb41978ccef1151b998755/history.json --exit-code 0 --source .10artifacts/raw/gitleaks-history.json
D28 · Secrets (history)gitleaks—gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/canine-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-28bac8513cfb41978ccef1151b998755/tree.json --exit-code 0 --source .0artifacts/raw/gitleaks-tree.json
D29 · Static Analysis (SAST)semgrep—semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/canine-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off --exclude *.arrow --exclude *.avro --exclude *.csv --exclude *.dat --exclude *.db --exclude *.feather --exclude *.geojson --exclude *.h5 --exclude *.hdf5 --exclude *.jsonl --exclude *.log --exclude *.ndjson --exclude *.npy --exclude *.npz --exclude *.orc --exclude *.parquet --exclude *.pickle --exclude *.pkl --exclude *.psv --exclude *.sqlite --exclude *.sqlite3 --exclude *.tfrecord --exclude *.tsv --exclude *.txt .126artifacts/raw/semgrep.json
D30 · Dependency Vulnerabilitiesnuget—nuget: not applicable — nuget: the solution did not restore on the analyzer's .NET SDK (an SDK/target-framework/restore mismatch, common for an older codebase), so there was no restored dependency graph to scan0—
D31 · IaC & Container Securitytrivy—trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.0—
D32 · Data Compliance (PII/GDPR)semgrep—semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that. semgrep could not parse 153 file(s) — `scripts/CargoSmoke/Program.cs`, `src/Shared/SharedPreUiCommandDispatcher.cs`, `src/Shared/StartupBundleArguments.cs`, `src/UniGetUI.AgentSkills.Cli/AddRun.cs`, `src/UniGetUI.AgentSkills.Cli/GitHubRelease.cs`, … (+148 more) — so the PII/GDPR sweep did not cover the unparsed regions of them; rows reported elsewhere in those files are real.0—
D37 · Vulnerability-disclosure Policydisclosure—disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.0—
D40 · Network Egress Confinementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.0—
D41 · Kernel & Syscall Confinementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.0—
D42 · Runtime Threat Enforcementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.0—
D43 · Malicious Dependenciesosv-scanner—osv-scanner --format json --recursive --experimental-disable-plugins transitivedependency/requirements --experimental-disable-plugins dotnet/csproj --experimental-disable-plugins dotnet/nugetcpm . /tmp/codehealth-osv-sbom-d38c9d6243d44667af9538594ed24a090artifacts/raw/osv-scanner.json

Run 01a1cd39-5b75-7de2-a8b1-4a0163a5ce0d · every finding is also locatable in findings.md, and the complete scoring record (with exit codes + durations) in sidecar.json.

Downloadable artifacts

Machine-readable and reproducible from this commit + frozen rubric — drop them straight into a contract appendix, a CRA dossier, or a downstream SCA / VEX tool.

⬇ Findings, MITRE CWE-tagged .sarif⬇ Health changelog .md